Aplicaciones PTC PDF

Circuit Protection Business Unit Headquarters
308 Constitution Drive, Building H

Menlo Park, CA USA 94025-1164
Tel : (800) 227-7040, (650) 361-6900
Fax : (650) 361-4600
www.circuitprotection.com
www.circuitprotection.com.hk (Chinese)
www.tycoelectronics.com/japan/raychem (Japanese)
Raychem Circuit Protection Products Catalog 2010

SOUTH AMERICA EUROPE ASIA / PACIFIC
Overcurrent Circuit Protection • Hybrid Protection • Overvoltage Circuit Protection
Brazil UK / Eire / Benelux / Japan China, Hong Kong
Tel : 55-11-2103-6090 Israel / South Africa Tel : 81-44-900-5110 Tel : 852-2738-8181
Fax : 55-11-2103-6216 Tel : 49-89-6089485 Fax : 81-44-900-5140 Fax : 852-2735-1185
Fax : 49-89-6089394
Korea Singapore / Vietnam
Germany / Austria / Switzerland / Tel : 82-2-3415-4654 Tel : 65-6416-4205
Eastern Europe / Russia Fax : 82-2-3486-1786 Fax : 65-6481-9377
Tel : 49-89-6089584
Taiwan Thailand / Malaysia
Fax : 49-89-6089394
Tel : 886-2-8768-2788 x 211 Tel : 6-04-217-8112
Italy / Iberia Fax : 886-2-8768-1277 Fax : 6-04-229-8177
Greece / Turkey
China, Beijing Australia / Philippines
Tel : 33-1-34202261
Tel : 86-10-6569-3488 x 16522 Tel : 63-2-848-0171 x 103
Fax : 33-1-34202324
Fax : 86-10-6569-3206 Fax : 63-2-867-8661
Nordic / Baltic
China, Shanghai India
Tel : 49-89-6089485
Tel : 86-21-6106-7357 Tel : 91-80-4161-3745
Fax : 49-89-6089394
Fax : 86-21-6485-3255 Mobile : 91-99-0248-8886
France
China, Shenzhen / Guangzhou
Tel : 33-1-34202129
Tel : 86-755-2515-4797
Fax : 33-1-34202324
Fax : 86-755-2598-0419
Other Countries
Tel : 49-89-6089696
Fax : 49-89-6089394
Raychem Circuit Protection Products

©2010 Tyco Electronics Corporation. RCP0060E.0410
Catalog 2010
2Pro, microSMD, miniSMD, nanoSMD, PolySwitch, PolyZen, Raychem, TE (Logo) and Tyco Electronics are trademarks of the Tyco
Electronics group of companies and its licensors. All information, including illustrations, is believed to be reliable. Users, however,
should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no
warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics’
only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale for this product, and in no case will Tyco
Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes
without notification to Buyer—to materials or processing that do not affect compliance with any applicable specification.
This catalog is intended to present application, product, and technical data to assist the user in selecting circuit
protection products, including PolySwitch resettable devices, PolyZen devices, 2Pro devices, Silicon ESD
protection devices, ESD protection devices, chip fuses and gas discharge tubes. All information, including
illustrations, is believed to be accurate and reliable. However, users should independently evaluate the suitability
of, and test each product for their application. Tyco Electronics Corporation makes no warranties as to the
accuracy or completeness of the information in this catalog and disclaims any liability resulting from its use. Tyco
Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but
not limited to, any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only
obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale and in no case will Tyco
Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or
misuse of its products.
Tyco Electronics reserves the right to change or update, without notice, any information contained in this catalog;
to change, without notice, the design, construction, materials, processing, or specification of any products; and
to discontinue or limit production or distribution of any products. This publication supersedes and replaces all
information previously supplied.
Without express written consent by an officer of Tyco Electronics, Tyco Electronics does not authorize the use of
any of its products as components in nuclear facility applications, aerospace, or in critical life support systems or
devices where the failure of the product in the application might be reasonably expected to cause the failure or
malfunction of the system or device or to affect its safety or effectiveness. Further, Tyco Electronics does not
authorize the use of its products in applications involving permanent surgical implants into the body.
2Pro, microSMD, miniSMD, nanoSMD, PolySwitch, PolyZen, Raychem, TE (Logo) and Tyco Electronics are
trademarks of the Tyco Electronics group of companies and its licensors.
All other trademarks are trademarks of their respective owners.
© 2010 Tyco Electronics Corporation. All rights reserved.

Table of Contents
Overview 1
• Tyco Electronics Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
• Circuit Protection Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Application Summaries 2
• Automotive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
• Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
• Industrial / Appliance and HVAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Medical Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Portable Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Application Solution Guide 24 3

Hybrid Protection
PolyZen Devices 27 4
2Pro Devices 35 5
Overvoltage Circuit Protection
NEW Silicon ESD Protection Devices 39 6
ESD Protection Devices 45 7
Gas Discharge Tubes 51 8
Overcurrent Circuit Protection
Surface-mount Fuses 9
• Fundamentals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
• Fast-Acting Chip Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
• High-Current-Rated Chip Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
• Slow-Blow Chip Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
• Specification, Packaging Information, Agency Approvals and . . . . . . . . . . . 75
Part Numbering Systems for All Chip Fuses
• Telecom Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
PolySwitch Resettable Devices 10

• Fundamentals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
• Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
• Surface-mount Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
- (femtoSMDC, picoSMDC, nanoSMDC, microSMD, miniSMDC, miniSMDE, midSMD, SMD)
• Radial-leaded Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
- (BBRF, RXEF, RKEF, RTEF, RUEF, RGEF, RHEF, RUSBF)
• Line-Voltage-Rated Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
- (LVR, LVRL)
• Automotive Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
- (AGRF, AHRF, AHEF, AHS, ASMD, BD)
• Strap Battery Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
- (VLR, VLP, VTP, LTP, MXP, LR4, SRP, miniSMDE)
• Telecommunications and Networking Devices . . . . . . . . . . . . . . . . . . . . . . . . . 187
- (TCF, TRF, TS, TSV, TSL, TSM)
Tyco Electronics
Our commitment. Your advantage.
Welcome to Tyco Electronics
Tyco Electronics Ltd. is a leading global provider of engineered electronic components, network solutions,
specialty products and undersea telecommunication systems, with fiscal 2009 sales of US$10.3 billion to
customers in more than 150 countries. We design, manufacture and market products for customers in a
broad array of industries including automotive; data communication systems and consumer electronics;
telecommunications; aerospace, defense and marine; medical; energy; and lighting. With approximately
7,000 engineers and worldwide manufacturing, sales and customer service capabilities, Tyco Electronics’
commitment is our customers’ advantage.
Our Product Advantage

We design, manufacture, and market nearly 500,000 products for more than 200,000 customer locations
in industries ranging from automotive, appliance, and aerospace and defense to telecommunications,
computers, and consumer electronics. We bring a performance advantage to every technology, product
and service we provide, including connector systems, relays, fiber optics, circuit protection devices, wire
and cable, touch systems, heat shrink tubing, racks and panels, network interface devices, and undersea
telecommunication systems. We are continually honing our technological edge with the goal of delivering
the best products – with the highest quality – every time.
Our Technology Advantage

We invest more than four percent of the company’s sales revenue on research, development and
engineering annually. These efforts are supported by over 7,000 engineers and 17 global design centers,
working closely with our customers to develop highly engineered, application-specific products and
systems to satisfy customers’ needs. We apply for more than 750 patents annually and hold more than
15,000 patents and patent applications in total. Our innovation, early design involvement and materials
expertise give customers a competitive advantage by delivering new functionality, and by helping them
to bring better performance to existing products, deliver new products to market faster, and realize greater
efficiencies in their manufacturing processes.
Our Global Advantage

We have an established manufacturing presence in over 25 countries, we operate in approximately 50
countries, and we serve customers in more than 150 countries. Our global coverage positions us near our
customers and allows us to assist them in consolidating their supply base and lowering their production
costs. In addition, our Global Account Management programs allow us to maintain close working
relationships with the key customers in the markets we serve. With sales of US$10.3 billion in fiscal 2009,
we are significantly larger than many of our competitors – giving us scale and reach that generate direct
dividends for our customers everywhere.
Our Employee Advantage

We have approximately 75,000 dedicated employees who are based throughout the world, with
approximately 26,000 employees in China alone. By maximizing the commitment of our 7,000-plus
engineers, and the reach of our 5,000-plus member sales force serving customers in more than 150
countries, we can collaborate with customers to provide highly engineered products and innovative
solutions to meet their needs. Our diverse and capable management team is equally dedicated to creating
and sustaining those powerful customer alliances – and to earning their business every day.
2
1
Circuit Protection Products
Overview
Our circuit protection products are a part of your everyday life. From your phone battery to your car’s
steering wheel, we are helping to make your world safer and your electronics more reliable.
For over 25 years we have pioneered the field of polymeric positive temperature coefficient (PPTC)
resettable technology with our PolySwitch product line. We developed the first patents for the use of a
PPTC device as a variable resistor in circuit protection applications in the 70’s and 80’s. Since then, we have
continued to expand our family of PolySwitch PPTC devices to include wider voltage, current, and
temperature ranges in a variety of form factors.
Established as a leader in resettable circuit protection solutions, we continue to expand our product
portfolio to include overcurrent, overvoltage and hybrid circuit protection product lines.
Our overvoltage circuit protection products include gas discharge tubes (GDT), electrostatic discharge
protectors (ESD) and Silicon ESD (SESD) protection devices. When used along with PolySwitch devices,
these overvoltage devices can help provide a coordinated and resettable solution to assist OEMs in
meeting stringent regulatory requirements and in improving equipment reliability.
Single-use fuses – such as slow-blow chip fuses, fast-acting chip fuses, telecom fuses, and high-current-
rated chip fuses – are suitable for use in applications that need to disable the circuit rather than isolate it.
Our two hybrid protection product lines – PolyZen devices and 2Pro devices – integrate overcurrent and
overvoltage protection functions in a single device. This effectively reduces component count and, when
appropriately applied, can expand performance attributes and help improve system reliability.
Billions of our Raychem circuit protection devices are being used to help protect a wide range of electronic
products in the computer, battery and portable electronics, consumer, automotive, industrial, home
appliance and HVAC, and telecommunication markets. In addition, our leading-edge solutions continue to
add value in transient overvoltage protection for telecommunications applications.
We are recognized as a leader in operational excellence and customer service. And, our products are in
compliance with globally recognized ISO9000/TS16949 standards.
We offer a dedicated engineering sales force, world-wide manufacturing and design centers, and local
engineering support devoted to our circuit protection business. This helps us to think, manage, and share
globally, yet act locally to meet our customer needs.
3
Application Summaries
Navigation and Infotainment System

2 Infotainment and navigation systems are packed with electronics and connectivity
elements. Raychem circuit protection devices help protect a wide variety of
functions such as powered antennae, CAN-bus, touch screen, USB ports, RF tuners,
I/O lines, HDD, etc.
Overcurrent and overvoltage protection devices help prevent system breakdown
and enhance design safety.
• AHRF, AGRF, AHEF
• AHS, ASMD, miniSMD, microSMD, nanoSMD
• ESD
• SESD
• SFF, SFS
• ZEN
Driver-Side Console
The switch console on the driver-side door allows the driver to control multiple
functions, including power windows, side mirrors and power door lock. Small
surface-mount PolySwitch devices help protect PCB traces against damage caused
by overheating and smoking in the event of a short circuit. A variety of designs
include PolySwitch devices to help protect PCB traces leading to power window
motors, delicate carbon membrane in microswitches, transistors in LED backlighting
Automotive
circuits and small traces of the side mirror contol circuit.

• miniSMD, microSMD, nanoSMD
• SFF, SFS
One-Touch-Down Circuit for Power Windows and Power Sunroofs

This lower cost one-touch-down circuit employs a PolySwitch PPTC device to
function as both a sense component and a switch component. This functionality
allows a PolySwitch device to replace a number of other devices, such as the sense
resistor, comparator, driver and control circuitry used in traditional power window
and sunroof circuits. As a result, designers can achieve net cost savings through
reduced component count and reduction in wire size.
• AHRF, AGRF, AHEF PolySwitch Device Employed in One-Touch-Down Circuit
• AHS, ASMD
Window Up Switch
+
+ Window
Lift Mtr.
Window Down Switch Motor
-
One-Touch-Down Switch Traditional Design Tyco Electronics Solution

(activated at end of stroke)
S.P.D.T RELAY
Shown in N.C. position
– PolySwitch Device
4
Application
Summaries
Automotive Electronics
PolyZen devices help protect automotive peripherals and portable electronics that
can be charged in the vehicle from damage caused by inductive voltage spikes,
voltage transients, and reverse bias. The PolyZen device provides coordinated
protection with a component that protects like a Zener diode, but is capable of
withstanding the high-power fault conditions that can occur in automotive
applications. 2
• ZEN
Automotive Power Conditioning (DC to DC converter output)
From Car To
Battery Peripheral
DC/DC
+
PolyZen
Power Device Power
Connector Connector
_
Automotive Actuators and Medium-Size DC Motors

Automotive electric motors can overheat and cause damage to temperature
sensitive components. To help protect these components, custom made
PolySwitch devices can be designed for specific customer applications. Installing
a PolySwitch device in close proximity to the motor or solenoid offers the added
benefit of limiting current due to excessive heat.
Actuator Circuit
• AGRF, AHRF, AHEF
• SFF, SFS, SFH
Switch PolySwitch
Device
+
Automotive
Printed Circuit Board Trace
The width of the copper traces must be reduced to provide more space for the
tighter-packed and smaller printed circuit boards. These “Black Box” control
modules handle a large number of high-powered accessories such as power
windows, power seat adjusters, remotely controlled door locks, and radio & GPS
antennae. PolySwitch resettable devices can be used to help protect these delicate
printed circuit board traces against damage caused by overcurrent conditions.
• AHS, ASMD, miniSMD, microSMD, nanoSMD
• SFF, SFS
Automobile Harness
The wiring harness architectures of light and heavy vehicles have undergone
considerable change due to increased electrical and electronic content. Resettable
circuit protection that does not need to be driver accessible, such as PolySwitch
PPTC devices, offers a number of solutions that may be used separately or in
combination. Overvoltage
= Circuit Protection HVAC A/C Clutch
protection devices (MOVs) (fuse or PolySwitch device)
= PolySwitch device Fan
are also recommended.
Under-hood In-cabin Vent Motor 1
• AHRF, AGRF, AHEF Engine Vent Motor 2

Alternator Control
• VLP, VLR, VTP, LTP, SRP Window Motor 1
• ASMD Window Motor 2
• BD280 ABS
Window Motor 3
• SFF, SFS
+ Window Motor 4
Mirrors
Battery Junction
Power Door Locks
Box
Distribution Module
Center
5
DC Cigarette Lighters and Power Plug Adapters
Charger circuits for mobile phones, iPods, after-market hands-free devices, or other
battery operated equipment use connectors to plug into automobile cigarette lighter
or power outlets. These assemblies must operate over a wide range of temperatures,
charging conditions and in a harsh automotive environment.
Typically, overcurrent protection, such as a PolySwitch PPTC device, and
2 overvoltage protection are coordinated at the input to the charger to help meet the
stringent electrical requirement.
A single PolyZen device can be Device
CLA Connector/ Side
PolyZen
Device
used to help protect against CLA-Source end
+ +
Socket
+
damage caused by overcurrent CL CL
and overvoltage faults. DC Relay

Device
Source PHY
• AHS, ASMD – – –
• SFF, SFS, SFH Device
• ZEN CL = Current Limiting Device Connector
Automotive Control Application and Multimedia Busses

Connecting lifestyles from the home to the vehicle has become a reality in the
automotive industry. MOST, Flexray, IEEE1394 and other networks now co-exist with
CAN and LIN. Their main goal is to facilitate equipment interfacing and information
sharing for embedded equipment but also for after-market electronic equipment
POF Customer Convenience Port
such as Portable Navigation Devices (PNDs), iPods, DVD players, etc. In a hot- Powered 6 Pin IEEE 1394b
Copper bilingual connector
pluggable automotive environment, where the consumer is connecting and
disconnecting peripherals on a powered port, the potential for short-circuit damage Customer Convenience Port
(Passenger)
is clearly present. PolySwitch devices and ESD protection devices can be used to Powered 6 Pin IEEE 1394b
bilingual connector
help protect the connected equipment.
LCD Display
• AHS, ASMD, miniSMD, nanoSMD
• SFF, SFS Speaker
• ESD, SESD (Data Busses only)

Automotive
H-Bridges
Automotive FET switched H-bridges must be protected from reverse polarity
power sources. This may occur when jumper cables are connected to the wrong
polarity of a dead or excessively discharged battery or when a new battery is
installed backwards. Without protection, excessive heating can lead to failures in PolySwitch Device PolySwitch Device
electronic modules or inadvertent activation of vehicle loads such as solenoids and
motors, which can lead to unsafe conditions. #1 #2 #1 #2
#1 #2 #1 #2
• AHRF, AGRF, AHEF M M M M
• AHS, ASMD #3 #4 #3 #4 #3 #4 #3 #4
A. Typical H-Bridge B. Reverse Polarity C. H-Bridge Circuit with D. Equivalent Reverse

Circuit Connection Equivalent Circuit PPTC Device for Polarity Circuit
Protection from with PPTC Device
Reverse Polarity
Liquid Crystal Display Backlight Heaters

There are an increased number of displays being designed into automobiles such as
navigation systems, instrumentation displays, video and TV screens. A current
limiting device should be employed to help prevent thermal runaway due to a failure
in the control circuitry. In most cases the circuit will be powered off on a regular basis
(ie: when the ignition is turned off). In this case a resettable PPTC protection device
Data Lines
may be desired. In other cases a single-use fuse may be preferred.
• AHRF, AGRF, AHEF Control CL
Circuit
• miniSMD, microSMD, nanoSMD
Heating Element
CL = Current Limiting Device
6
Application
Summaries
UL60950 and TIA-968-A, (formerly FCC part 68) Requirements
UL60950 and TIA-968-A describe electrical hazards from which customer premise
equipment (CPE) in North America must be protected. Below are resettable circuit
protection recommendations.
• TRF600, TS600, TSM600
• TM2P
• FT600 Suggested Arrangement to Meet TIA-968-A for a
Suggested Arrangement to Meet TIA-968-A for a
Grounded CPE Design
2
Ungrounded CPE Design (RS > 7.5Ω)
T CL
T CL
OV
Telecom OV CPE
Telecom OV CPE Line
Line
OV optional
R R CL
(RS > 7.5Ω)
OV = Overvoltage Device
GR-1089 : Public Switched Telephone Network Equipment

GR-1089 describes the electrical hazards which public switched telephone network
(PSTN) equipment in North America should be protected against. The figure below
shows several recommended resettable circuit protection solutions for a simplified
model of a central office end of subscriber loop system.
• TRF600, TS600, TSM600
• FT600
• GTC
Simplified Model of Central Office End of Subscriber Loop
Switch CO Wiring MDF

CL Ring
CL = Current limiting device SOV POV
Communications
CO = Central office
SLIC
MDF = Main distribution frame
POV = Primary overvoltage protection device SOV POV
SLIC = Subscriber line interface card CL Tip
SOV = Secondary overvoltage protection device
GR-1089-CORE, Issue 4
To help prevent damage to telecom equipment, circuits connected to outside lines
generally need protection from lightning and power fault events. Protection may be
primary. However, the equipment must be able to withstand the surges that the
primary protector lets through. For this reason, secondary and even tertiary Coordination Element
protection is included to help limit the potential damage of the surge let through. To
be effective, the secondary protection must coordinate with the primary protection.
Tyco Electronics offers a broad line of Agreed or
(RS)*
overcurrent and overvoltage devices that T CL Integrated Secondary Equipment
Primary Protection
can help Public Switched Telephone SOV Protection
Agreed or
Network conserve valuable board space Telecom Integrated SOV CPE
and meet emerging safety and Line Primary
Protection
SOV optional
performance standards.
R CL
(RS)*
• TRF600, TS600, TSM600
• FT600 SOV = Secondary Overvoltage Device
• GTC * RS is equal to the total coordinating resistance of the application
ITU-T Recommendations
ITU-T provides the figure below shows several recommendations for central office
(K.20), customer premise (K.21) and access network (K.45) equipment. Below is
an overview of our recommendations and resettable circuit protection solutions.
• TCF250, TRF250, TS250, TSV250
• FT600 Typical Protection System for Network Equipment
• GTC
A CL
Line Feed
OV Resistor
SLIC chip
Telecom or
Line Transformer
OV Line Feed
Resistor
B CL

7
Short-haul/Intrabuilding Protection Requirements
Communications equipment that is not directly connected to the PSTN is subjected
to lower level hazards. Here are a few circuit protection recommendations for LAN,
WLL, VoIP and other intrabuilding applications.
• TRF250, TS250, TSL250, TSV250
2 • FT600
• GTC Fully Resettable Protection Solution for
Linecard or Grounded CPE Protection
Cable-based Telephone Systems
CL T CL T
OV OV
Twisted
Shielded Conversion
pair to Equipment OV Telecom
Coax Electronics Line
phones
OV optional OV
CL R CL R

Customer Premise Equipment

To protect subscribers against damage caused by faults entering from outside
wiring, customer premise equipment (CPE) is designed with power cross and
lightning protection components. The following are recommended protection
solutions based on regional requirements.
• RXEF • SMD
• TRF250, TRF600, TS250, TS600, TSV250, TSM600
• FT600
• GTC Generic CPE Interface Moderm Interface
T CL CL
~ Loop
Current Line
Communications
Telecom OV CPE OV – + Side

Line IC
~
R
CL = Current Limiting Device Hook Switch

Customer Premise Equipment using 2Pro Devices

2Pro devices help protect cost-sensitive PSTN and voice over internet protocol
(VolP) telephony equipment from damage caused by lightning and ESD surges,
power contact and induction with AC lines. If left unprotected from these hazards,
CPE may fail or may pose a safety risk for subscribers and maintenance personnel.
• TM2P
• FT600
• GTC Ungrounded System Grounded System
2Pro Device 2Pro Device
(T) (T)
Equipment
Equipment
Telecom
Telecom
Telecom Telecom
Line Line 2Pro Device
(R) (R)
Analog Linecards
Central office linecards are subject to transient overcurrent and overvoltage faults,
which may be generated from nearby power cross, power induction, and lightning
events. Circuit protection recommendations based on regional agency specifications
are provided below.
Analog Linecard with External Ring Generator
• TRF250, TRF600, TS250, TS600, TSV250, TSM600 Ring Vbat
• FT600 • GTC Generator
CL
Analog Linecard with Integrated Ring Generator
Vbat Tip
CL
OV OV
Tip
SLIC with Ring Integrated
integrated Relay SLIC
OV ring
CL generator OV OV
CL
Ring Ring

8
Application
Summaries
T1/E1 Equipment
T1/E1 transmission equipment must be protected against damage caused by transient
power cross and lightning faults which may enter on outside plant wiring. Here are our
circuit protection recommendations based on regional agency specifications.
• TRF250, TRF600, TS250, TS600, TSV250, TSM600 • FT600 • GTC Central Office Line Regenerator Line Regenerator
T1/E1 Central Office Transceiver Protection T1/E1 Line Repeater Protection

T1 Transceiver
3K ft 6K ft
2
Line Repeater
CL
CL TX Pair
OV
Tx OV
OV OV Rx RX Pair
CL
T1 Power Remote Central
Transceiver Terminal T1
Source Office Transceiver
CL Transceiver CL
OV
Rx OV OV Tx
OV
CL
Central Office
CL = Current Limiting Device OV = Overvoltage Device
ISDN Equipment
ISDN central office (CO) and CPE equipment must be protected against damage
caused by transient power cross and lightning faults which may also enter via
outside plant wiring. Circuit protection recommendations based on regional agency
Terminal Non-ISDN
specifications are provided here. Adapter Terminal
T
ISDN Compliant TA POTS
• TRF250, TRF600, TS250, TS600, TSV250, TSM600 • FT600 • GTC Central Office Network
Switching Termination
ISDN U Interface Protection ISDN S/T Interface Protection System Terminal Equipment
ISDN S/T-Interface Layer 1
(ISDN Compliant)
CL CO NT1 B1
T B2
CL Tx Terminal Tx Rx U TE D
Adaptor OV ISDN DSL
T Reference
2-Wire,
160 kbps B1
2B1Q S B2
ISDN Power Terminal Power ISDN TE D
Communications
OV ±2.5V
Transceiver Source Equipment Sink Transceiver T NT2
PBX ISDN
CL Terminal
S
R Network T Reference TA
Rx Termination OV
4-Wire
Rx Tx S Reference, 4-Wire
Device
ISDN U-Interface
CL = Current Limiting Device OV = Overvoltage Device ISDN S/T Interface
ADSL Equipment
ADSL equipment, like splitters, must be protected against damage caused by both
external and intrabuilding faults. Resettable protection solutions are provided here,
based on regional requirements.
• TRF250, TRF600, TS250, TS600, TSV250, TSM600 Central Office Local Loop Remote Site
• FT600 Service
Digital ADSL ADSL
• GTC Network Transceiver Unit Transceiver Unit Modules
CL = Current Limiting Device Video
High ATU-C
OV = Overvoltage Device Modem ATU-R Voice
Pass
Filter Data
CL PSTN POTS
T CL
OV T Up to 12k ft
Low
Splitter Splitter
Relay
Telecom Pass OV POTS (optional)

Line Filter
R
OV CL
R
Common-Mode
CL
Choke
HDSL Equipment
HDSL equipment must be protected against damage caused by transient power HDSL Central Office/Remote Terminal
cross and lightning faults which may enter on outside plant wiring. The following CL
T
is our circuit protection recommendation, based on regional agency specifications. OV
Tx
OV
• TRF250, TRF600, TS250, TS600, TSV250, TSM600
OV
• FT600 R
• GTC CL
Power HDSL
Sink Transceiver
CL
T
OV
OV Rx
OV
R
CL
CL = Current Limiting Device OV = Overvoltage Device
9
Main Distribution Frame (MDF) Modules
Telecom system, such as MDF modules, typically have multi-stage circuit
protection. Primary protection is used closest to the “outside world” where the
highest surge withstand capability is typically needed. Secondary protection is
needed to help protect against damage caused by hazardous power cross and
2 lightning faults until the primary protection component activates.
Primary:
• TCF250, TRF250, TS250, TSV250
A CL A’
• FT600
OV
Secondary:
• GTC GND OV
OV
B CL B’

Cable Telephony/Cable Power Passing Tap

Cable telephony electronics that are powered via twisted pair or coaxial cable are
susceptible to power faults passed through the cable plant. Protection in the power
passing taps decreases the risk of these faults.
Cable Telephony/Cable Power Architecture
• BBRF, Cable Plant
Power Source Residence, apartment building or office
TRF250, TRF600, Handset
NIU CL
TS250, TS600, CL Tip
TSL250, TSV250, OV
TSM600
• FT600 Coax cable or OV
combination Ring
• GTC OV coax/twisted pair
CL Coax
signal & power TV
Communications
Cable
OV
Coax Cable
Cable Modem
CL = Current Limiting Device OV
PBX and Key Telephone Systems

Below are circuit protection device recommendations to help protect PBX and key
telephone systems against damage caused by power faults and short circuits.
• TRF250, TRF600, TS250, TS600, TSM600
• FT600
PBX
• GTC PolySwitch device
Station
Card Analog
Call or
Processing Digital PSTN
Logic Line POTS
Station Cards ISDN
Card XDSL
T1/E1
POS Equipment
Equipment connected to telephone lines can be subject to power cross, induction,
and lightning surge hazards. Scanner motors and ditherers need protection against
damage caused by jams and stalls.
• RUEF, RXEF
• miniSMD, SMD
• TRF, TS
• FT600 CL CL
AC
• SFF, SFS Input Tip
M OV
Ring
Fixed scanner Credit card verification

10
Application
Summaries
Electromagnetic Loads
Electromagnetic loads can be susceptible to many problems. Incorrect use of
solenoids, valves, and motors can lead to device failure and circuit damage.
• RGEF, RUEF, RXEF
Current limiting device between
• miniSMD, SMD the FET driver and the load
• SFF, SFS
2
Control FET
Electronics
CL
Load
Solenoids
Solenoids are used in various PC and peripheral applications such as printer feed Cycle 1 Cycle 2
trays and CD/CD-RW/DVD tray mechanisms. A PolySwitch device can be used to Fig. 1
help protect the coil assembly of the solenoid when a sensor fails or if the armature Iin
on
off
on
off
fails to retract, thus causing the coil temperature to increase and burn out the coil
wire. Tcoil
Fig. 2
Industrial / Appliance and HVAC

• RGEF, RHEF, RUEF, RXEF Coil Wire Burn out
• miniSMD, SMD Tcoil Fig. 3
• SFF, SFS 120˚C Iin
on
Tambient
Tcoil PolySwitch device

Fig. 4 trips at 120˚C
120˚C
Iin
Tambient on
TIME
Security and Fire Alarm Systems

Security and fire alarm systems have a need for circuit
CL
protection, due to fault conditions and requirements. Remote
Power
I/O
Possible faults include short circuits in the sensor lines or Expand Protection
CL
overheating of the battery. It is also important to consider
Door/Window
the different currents and what is needed to meet the Motion
Sensors
requirements of UL864. Siren
CL CL or Bell
Main PCB
• RGEF, RUEF, RXEF AC ~ Control Logic
OV AC/DC OV
• TRF Input I/O
Power Distribution
• GTC CL
• ESD, SESD CL Battery
Backup
• TM2P 14 2Pro 1
Tip +/–48-
57Vdc TX 18
2
Ext OV 3
Ring
Phone
RX PoE
CL = Current Limiting Device Source
6
Test and Measurement Equipment

Power supplies, communication ports, test probes, and battery packs are all
vulnerable to overcurrent faults because of incorrect connections or damaged
cables.
Power Supply Protection
• RTEF, RUEF, RXEF
• miniSMD, SMD Output voltage, isolated from fault
• TRF by current limiting device
• ESD, SESD CL
• SFF, SFS +12VDC
+12VDC
to other loads
Power
supply CL
+12VDC
11
Process and Industrial Controls
Pinched cables and incorrectly installed/connected cables lead to shorts,
overheating, component failures, and burned circuit board traces.
• RHEF, RTEF, RUEF, RXEF
• miniSMD, SMD
2 • SFF, SFS, SFH
RS-485 Signal with Protection Controller Protection
Controller CL (can reach up Controller

card to 4,000 ft.) Card
CL
+V +V +V +V
CL Monitor
Relay Relay Relay Relay

CL
Operator Interface Terminal

CL CL CL CL CL
Sensor RS-232 Signal with Protection

CL
+12 V
CL
Fan RL RL RL RL RS-232 GND
Motor Lock Valve
host computer or Back-to-back

-12 V
programmable logic controller zener diodes

Power Input Protection for AC LED

Lighting fixtures powered by AC power can be put at risk from high voltage or
power transients on the AC inputs due to lighting strikes, power station load
switching transients, or from the resulting surge currents. LVR
Overvoltage and overcurrent protection are often viewed as unrelated conditions.
Tyco Electronics offers designers a complete solution that will help enhance
product reliability and safety.
• LVR AC AC LED
Input OV
• miniSMD, SMD Lighting
Circuit Protection Opportunities in Solid State Lighting (SSL)/LED Lighting

LED driver integrated circuits (ICs) used in many LED applications require a
protected DC input to provide a regulated-current output to the LED.
A PolySwitch device, in series with the LED driver IC, combined with a parallel
voltage limiting device such as a Zener or transient suppression diode helps provide
effective protection against damage caused by faulty DC input voltages. PolyZen
devices provide both protection capabilities in one package.
• LVR
• ZEN
• RGEF, RHEF, RUEF, RXEF
• GTC
• ESD
• SFF, SFS, SFH
LEDs
R1 CL CL
+
(L)
GTC
AC PolyZen LED ESD ESD
Input AC/DC
Device Driver
OV
(N)
_

12
Application
Summaries
Washing Machines
A number of Raychem circuit protection devices can be used to help provide
overtemperature, overcurrent and overvoltage protection for the electric motors,
LED displays and control electronics found in home appliances.
• LVR
• RXEF, RKEF,
RTEF, RUEF,
85-240AC
Power In Communication Link
LCD or OLED
Display
2
Wireless RF Transmitter
RGEF, RHEF, Blue Tooth / WiFi
Backlighting
RUSBF Display
• SMD
• ESD Program / Mode Selection
• SFF, SFS, SFH
Water Level
PFC Overflow Detection
Heating
+5-24V Door Lock
Power Control
Supply Board Main Washing Valve
PPTC, MOV, LVR 12/24Vdc
Pre-Washing Valve 24/110/240Vac
@6VA
Hot Water Valve
IGBT Drain Pump

Power Stage
Speed
Power Out – Motor Drive
Refrigerators / Freezers

Our circuit protection devices help protect the motors and fans, controllers,
touchpads, displays and interface circuitry required by sophisticated appliances.
• LVR
• RXEF, RKEF, Communication Link
RTEF, RUEF, Wireless RF Transmitter
Blue Tooth / WiFi
RGEF, RHEF, Ice Maker
Motor Driver
M Damper Motor
9-24V~1.5A (Stepping Motor)
RUSBF Sensors 24V~5A
• SMD Brushless DC
Display Motor Driver Freezer Cooling Fan
12-24V~.5A M
• ESD Alarms Main
(brushless DC Motor)
• SFF, SFS, SFH Board
Key Input Motor Driver Compressor Cooling Fan
12-24V~5A M
(brushless DC Motor)
9V
Logic Driver Motor Driver Inside Cooling Fan
5V 5V@0.5A 12-16V~5A M
3.3/5V 1~2A for Logic (brushless DC Motor)
9/12/24V 6A for Motor control 3.3
12V Logic Driver
5V@0.5A Compressor
24V Control
Module TRIAC
High Voltage Source Driver
AC / DC Power M Compressor
Photo Photocoupler
85~240AC Supply Motor (AC)
TRIACs 630V~1.2KVpk
100~240AC
2.5KV
Air Conditioning Units

Resettable PolySwitch devices, ESD devices, and chip fuses help provide
coordinated overcurrent and overvoltage protection for the motors, fans, displays
and interface circuits used in modern HVAC equipment.
• LVR
• RXEF, RKEF, Remote Control Interface
RTEF, RUEF, Compressor
RGEF, RHEF,
Compressor Interface AC
RUSBF Controller Power
Motor
• SMD Module Module
• ESD
• SFF, SFS, SFH ˚C ˚F Serial communications
100 Main
30
Control
80 Module
20
60 Fan Motor
10
Fan Motor DC
40 Control DC
Power
0
Serial Module Module Motor
communications
-20 0
Position Signal
13
Keypads / Buttons for Medical Applications
An electrostatic discharge (ESD) event can occur when the user presses the
equipment buttons, which may result in damage to the internal circuitry of the
device.
Extremely low capacitance ESD protection devices, such as our ESD and SESD
2 devices, help shunt ESD away from sensitive circuitry in electronic devices without
inducing signal distortion.
• ESD
• SESD
LCD Backlight for Glucose Monitors

If the control circuitry fails to turn off the element, the current flowing through the
heating element can increase and lead to thermal runaway.
The PolySwitch resettable device is thermally linked to the liquid crystal display
(LCD) glass. It will “trip” thus reducing the current flowing through the heating
element.
• miniSMD, SMD
• SFF, SFS
• ZEN
Medical Electronics
USB, AC Power, and Sensor Pad Protection for Medical Monitoring Systems
When an unsuitable or faulty USB cable is plugged into the USB port, the applied
voltage, polarity and permitted current may exceed the specifications of the power
regulation circuits. This can damage the equipment and could become a safety
concern.
PolySwitch devices limit the flow of dangerously high currents during fault
conditions and reset back to normal operating mode once the fault condition is
removed; while PolyZen devices help clamp the voltage and shunt excess power to
ground.
• RTEF, RUEF, RXEF, RUSBF
• miniSMD, SMD
• ESD
• SESD
• SFF, SFS
• ZEN
At the AC input, the equipment can be put at risk from high currents due to power
station transients or application of the incorrect voltage.
• LVR
Sensor inputs, which monitor the patient’s vital signs, can be damaged when the
high voltage shock from a defibrillator is delivered.
Gas discharge tubes help provide overvoltage fault protection against damage
caused by high energy surges. They are suitable for sensitive equipment due to
excellent impulse sparkover response.
• GTC
14
Application
Summaries
LCD Monitor Controller for Patient Monitoring Systems
Power for LCDs is supplied from the 5V and 12V busses. The LCD controller itself
and the surrounding controller logic are powered from the 5V bus. The LCD inverter
and the electronics on the board are powered from the 12V bus. Misconnections
and mishandling during assembly or while in use can cause large overloads and
short circuits in the system, damaging expensive components.
2
• RUEF, RXEF
• nanoSMD, microSMD, miniSMD
• SFF, SFS
• ESD
• SESD
Medical Electronics
Automated External Defibrillator Electrodes
In most automated external defibrillators (AEDs), the pads that deliver the shock
also contain the sensors for the patient’s vital signs. The high voltage shock from
the defibrillator can cause damage to the electrodes.
Gas discharge tubes help provide overvoltage fault protection against damage
caused by high energy surges. They are suitable for sensitive equipment due to
excellent impulse sparkover response.
• GTC
15
5V/12V Power Lines
The connection of a 12V line from the power supply instead of a 5V line can cause
a high current inrush that can damage the other components in the circuit. Reverse
polarity can cause damage to the tantalum capacitors, causing the capacitor to
fail in a short-circuit mode. Applications that need this type of protection include
2 hard disk drives, CD-ROM, CD-RW, DVD, and other storage devices.
• RUEF, RUSBF
• nanoSMD, microSMD, miniSMD Protection for Disk Drives
• SFF, SFS
• ZEN
CL CL
12VDC 5VDC
Spindle Head
Motor Actuator
Backplane and Redundant Array of Inexpensive Disks (RAID)

Power backplane applications allow for field-serviceable and field-replaceable Quad Processor
cards and drives to maximize the “up-time” of products. During card or drive CL Server Board
Power or Disk Drive
replacements, the power on the backplane is live. Circuit protection is employed to Supply
No. 1
help minimize safety risks, comply with IEC60950 Safety Requirement Clause Quad Processor
Server Board
1.2.8.7 – Hazardous Energy Levels, and help protect against damage caused by CL
or Disk Drive
short circuits caused by incorrect insertion of cards.
Quad Processor
• RGEF, RXEF CL Server Board
Power or Disk Drive
• microSMD, miniSMD, SMD Supply
No. 2
• SFF, SFS, SFH Quad Processor
CL Server Board
or Disk Drive
Quad Processor
CL Server Board
Multimedia
or Disk Drive
Central Processing Units (CPUs)

Voltage regulation modules (VRMs) are used to supply power to central processing
units. Due to load-change transients, processors can draw up to 13A. Also, during
normal operation, the current demand can still change by as much as 7A as
Voltage Regulator
processor activity levels change. These high-current immediate demands can cause CL
Module
Processor
components to fail. Circuit protection helps prevent the VRM from damaging the
processor in the event of a VRM failure. CL
Voltage Regulator
Module
Processor
Power
• RGEF, RUEF Supply
• SMD CL
Voltage Regulator
Processor
Module
• SFF, SFS, SFH
Voltage Regulator
CL Module Processor
Device Bay
Typical Schematic
Due to hot-swappable bays, the device bay
System (PC, Monitor, etc.) Device (HDD, DVD, etc.)
specification recommends overcurrent
Vpwr en(o.c)
protection for high availability situations 1394 PHY
V33(3.3V) Vid Vid (3.3V)
such as servers and industrial computers. Control
AND/OR
USB PORT
Vid - Gnd
An externally accessible port such as
Device
IEEE1394 or USB may also be used. Controller
• RGEF, RUEF V12(12V) 12V

CL V12
• microSMD, miniSMD, SMD Control
Cin12 Cbulk12
• SFS, SFH V12GND
V33(3.3V) V33 3.3V

CL Control
V33GND Cin33 Cbulk33
V5(5V) VS 5V
CL Control
V5GND Cin5 Cbulk5
16
Application
Summaries
Fibre Channel
A fault, such as a short circuit, during testing or hot-swapping a peripheral
component interconnect (PCI) card can cause significant damage. Incorrect
insertion of the gigabit interface converter (GBIC) or a foreign object placed into
the connector can also cause permanent damage to the system. Protection on the
PCI bus input is typically used as well as a secondary protector for the GBIC I/O.
• RUEF
2
• miniSMDC110F, miniSMDC260F
• SFS Typical Schematic
GBIC
CL
I/O
1.8A 0.3A
PCI Bus CL Power to
remainder
of on-board
electronics
IEEE 802.3 Ethernet LAN (Powered Ethernet)

The auxiliary unit interface (AUI) consists of signal circuits, power, and ground. Per
the IEEE 802.3 standard, the Voltage Plus circuit is capable of operating at 12-15VDC
for currents up to 500mA. In addition, per section 7.5.2.5, the source shall provide
protection for this circuit against Typical Schematic DTE
OFF
damage caused by an overload Attachment Unit
condition. Powering IP devices such IP Interface (AUI)
phones over the Ethernet cable ON Ethernet Medium Medium

Attachment Dependent Physical
introduces the potential for a short PHY PHY
Interface
(MAC) Unit Interface Medium
circuit and/or FET failure, causing (MAU) (MDI)
service interruption.
• RUEF, RXEF
• miniSMDC100F/16, miniSMDC075F, CL 48V Source
Multimedia
SMD030F-2018 From 4 Pair 48V Source DC
48V Power /
• SFF Source 48V DC
CL = Current Limiting Device Return 48V Return
IEEE 1394 FireWire, i.Link

Example of an IEEE 1394 Network
IEEE 1394’s complex power
architecture provides up to 1.5A Alternate Power
Provider/Consumer Power Provider Alternate Power
Provider/Consumer Power Provider
at voltages of 8-33V. PolySwitch PC DV Monitor Set-Top Box Digital Video Recorder
devices help provide short-circuit
protection in this high-power,
hot-plugging environment.
Alternate Power Power Consumer Power Provider Self Powered
Provider/Consumer
• RTEF CD-ROM Camera Audio Amplifier Digital Camcorder
• SMD
• SFS
Alternate Power Alternate Power Power Provider

Provider/Consumer Provider/Consumer
PolySwtich Device
=
Magnetic Disk Printer Scanner or Fuse
LCD Monitors
Power for LCD monitors is supplied from the 5V and 12V busses. The LCD controller
itself and the surrounding controller logic are powered from the 5V bus. The LCD
inverter and the electronics on the board are powered from the 12V bus.
Misconnections and mishandling during assembly or while in use can cause large
overloads and short circuits in the system, damaging expensive components. CL
LCD USB
Controller
Touch
Controller
Sense
Controller
Controller Logic Logic Logic
1-2A
• RUEF, RXEF CL
1-3A
Power
• SFF, SFS, SFH

• ESD, SESD (Data lines and user interface buttons) CL
Power
0.25 – 0.75A
Electronics
CL
LCD
Inverter
1-2A
17
I/O Ports
To meet regulatory agency requirements (UL60950), these ports must have a way
of interrupting or limiting the current in the event of an overload or short circuit.
• RUEF, RUSBF
• nanoSMD, microSMD, miniSMD, SMD
2 •
•
SFF, SFS
ZEN
RF Amp
• ESD, SESD Tuner
GDT Tx+/–
• GTC CATV Rx+/–
lines
OV
Devices Audio
Pre-amp/ ESD
Audio R & Amp HDMI/
Devices
In/Out Display Port
Chipset
L
Aux_CH(p)
OV Aux_CH(n)
Devices Hot Plug Detect
Video Return DP_PWR
DP_PWR
OV PolySwitch
Baseband Devices Device
Video
Pr Processor
Video PolySwitch
OV
In Devices Device
V_Bus
Pb V+
V– USB Control
ESD
Devices GND
Y
HDMI / Display Port

Chrominance
Luminance
Video ADC/DAC
Ch GND
USB
L GND
OV
Devices
S-Video Audio
Amp
Signal
Ear GND
Multimedia
Phones OV
Devices
Audio/Video Port OV = Overvoltage Device
LNB Satellite Set-Top Boxes

A short-circuit overload to the power supply can occur if the central pin in the
coaxial cable connection to the receiver is bent or crushed against the connector
during installation. It can also occur any time the user disconnects the antenna
from the receiver.
CL
• miniSMD, SMD Tip 1 4
OV
• RXEF
Ring
• GTC Modem
Circuit
• SFF CL
M
Power Motor
Supply CL
RF
Signal
CL Coax
Tuner Cable
Control
/ LNB
Main
PCB
CL = Current Limiting Device OV
Set Top Box
Loudspeakers
High-powered amplifiers used with low-powered speakers may overdrive the
speaker coils with excessive power during sustained high volumes. Low-powered
amplifiers may be overdriven so that clipping occurs. This causes an upward
frequency shift of power that can overload the tweeters. Digital recordings,
including compact discs, with their ability to reproduce high-frequency material,
place extra strain on tweeters. PolySwitch devices can help the design engineer
solve these problems.
Typical Circuit Shunt Resistor Circuit
• RXEF
• SFF, SFS CL Rsh
RCL CL
OV
RL
RCL
OV
RL

18
Application
Summaries
PC Cards and Sockets
Short circuits from external sources are the primary hazards for PC cards. The cards
need protection from large current inrushes that can damage the PC card or the PC
card bus.
Type II PC Card and Socket
• RUEF, RUSBF
•
•
nanoSMD, microSMD, SMD
SFF, SFS
Portable computer or
desktop computer with PC PC card socket PC card type II I/O card
2
card socket
• ESD, SESD (Data lines) Pin #17 CL
• ZEN
Pin #51
Battery or 5 (12, 3.3) volts

power supply
CL
External Transceiver
SCSI
The SCSI bus TERMPWR line can draw significant amounts of current in a short
circuit condition. A short circuit anywhere on the bus can cause the entire bus and
host to crash. PolySwitch PPTC devices can be used on the SCSI controller circuit
and on each connected peripheral to help protect against permanant damage.
Typical Schematic
• RUEF, RXEF
Power supply
• microSMD, miniSMD, SMD
• SFF, SFS
SCSI manager IC
Interface connector in computer
CL
Term power
220Ω 220Ω
Signal (1 of 19)
330Ω 330Ω
Multimedia
Ground
SCSI controller IC
CL = Current Limiting Device in external drive
Smart Card Readers

Smart cards are powered from the readers’ Vcc output. Defective cards or foreign
objects placed into the reader can cause a short circuit and permanently damage
the reader.
• microSMD010F
Smart Card Reader Schematic Magnetic Stripe
(Back of Card)
+ VCC GND
Vcc out to Smart Card
Mandatory RST VPP
Vcc = 5± 0.4V CLK I/O
PolySwitch Device Contacts
Imax = 55mA
Optional
Power Contacts
Source Embossing
Area
Front of Card
HDMI: LCD, plasma, HDTV, set-top box, DVD player

High definition multimedia interface (HDMI) applications such as LCD displays,
plasma displays, high definition television set-top boxes, and DVD players are HDMI Sink
susceptible to electrostatic discharge (ESD). To help protect the high speed

TMDS lines against damage caused by ESD hits, ESD or SESD devices are used
2 per line.
HDMI Source
• nanoSMD, microSMD, miniSMD ESD
HDMI Source HDMI Sink
• ESD Data Signal +/–
• SESD TMDS Channel 0

• SFF
• ZEN HDMI
Transmitter
TMDS Channel 1 HDMI
Receiver
TMDS Channel 2 Control
DVD Player STB Software
TMDS Clock Channel
Note : HDMI 1.3 reference layout, whitepaper, and testing
PC
results available upon request Display Data Channel (DOC)
CEC Line
19
Video Ports (VESA, DDC, DVI, HDMI, DisplayPort)
PolySwitch devices help protect video ports on PCI video cards and motherboard
video ports from faults on the 5V interface line in Display Data Channel (DDC)
circuits. These ports are designed for Energy Star compliance.
• RUEF, RUSBF
2 •
•
nanoSMD, microSMD, miniSMD, SMD
SFF, SFS
• ZEN
• ESD, SESD (Data lines)
OV
Devices
Video
Baseband
Video
Pr Processor
Video
In OV
Devices
Pb
Tx+/-
Rx+/-
lines
Y
ESD
Devices HDMI/
Display Port
HDMI / Display Port
Chipset
Video ADC/DAC
Aux_CH(p)
Chrominance
Aux_CH(n)
Luminance
Hot Plug Detect
S-Video Ch GND Return DP_PWR
L GND DP_PWR
OV CL
OV
Devices
Multimedia
Devices
VESA
Universal Serial Bus (USB)

PolySwitch devices help provide short-circuit protection in this hot-plugging
environment for USB hosts, self-powered and bus-powered hubs.
• ZEN
• RUEF, RUSBF
• ESD
• SESD
• SFF, SFS
Ganged Port Protection Low-active Overcurrent Pin Fault Reporting for

(two-port example) Individual Port Protection
Vcc Vcc
USB +5V
+5V USB
port PolySwitch
FB Port #1
Device FB
1 1
PolySwitch VA
2 2
Device
3 3
OC4 4
4 OC3
OC2
ESD Devices OC1 ESD Devices
OC4
Vcc
OC3 +5V
OC2 USB Hub USB
OC1 USB Micro controller PolySwitch
Port #2
port Device FB
FB 1
1 VA
2
USB Hub
Micro controller 2 3
3 4
4
ESD Devices
ESD Devices
20
Application
Summaries
USB Peripherals
PolyZen devices help protect against damage caused by overvoltage on USB peripherals
and devices on the 5V computer bus. The component helps protect sensitive follow-on
electronics – such as flash memory and other 6V capable silicon – from inductive voltage
spikes, incorrect power supplies, dirty power and other transients. The RoHS-compliant
device offers massive power handling in a 4mm package.
• nanoSMD, microSMD, miniSMD • ZEN • ESD, SESD (on data lines)
2
Typical Circuit – USB Peripherals USB Power Conditioning (Host, Hub, Remote Charger)
PolyZen Device PolyZen Device
From From To
USB Host Power Supply Peripheral
VBUS VBUS
Connector
Connector
D+ D+
USB
USB
D– D–
GND GND
Hard Disk Drives

PolyZen micro-assemblies help protect devices on the 5V and 12V computer bus
from overvoltage events and inductive voltage spikes resulting from rapid change
in current. The PolyZen device incorporates a stable Zener diode for precise voltage
clamping and a resistively non-linear, polymer positive temperature coefficient
Multimedia
layer that responds to either diode heating or overcurrent events by transitioning
from a low to a high resistance state. This unique device helps manufacturers meet
safety requirements and reduce warranty costs.
• nanoSMD, microSMD, miniSMD Typical Circuit – Hard Disc Drive
• ZEN From
PolyZen Device
Computer
• SFF Power Bus +12 Volt Line
• ESD (on data lines) (to spindle motor)
PolyZen Device
Connector
Power
+5 Volt Line
(to flash memory & logic)
GND
Computer Subsystems and Peripherals

Computer electronics can be exposed to voltages well in excess of the bus voltage,
and require protection for power sensitive electronics like flash memory. Voltage
spikes can result from a hot disconnect of a peripheral, an internal system shutdown,
or other internal power fluctuations. The PolyZen device provides coordinated
protection with a component
that protects like a Zener diode, Typical Circuit – Computer Peripherals
From
but is capable of withstanding Computer PolyZen Device
the high power fault conditions Power Bus
+12 Volt Line
that can occur in computer
electronics. PolyZen Device
Connector
Power
• nanoSMD, microSMD, miniSMD +5 Volt Line

• ZEN
• SFF
• ESD (on data lines) GND
21
Lithium Cells and Battery Packs
External shorts, runaway charging conditions, or abusive charging can cause
considerable damage to primary and secondary lithium cells. Rechargeable lithium
batteries are used in notebook computers and cellular phones, as well as other
portable electronic applications.
2 • LR4, LTP, SRP,
VLR, VLP, VTP, MXP
+
Typical Rechargeable Lithium Battery Pack Circuit
–
• Custom Annular Disc Devices

Electronic Protection Module PolySwitch
Strap
Device
Li cell
...
Annular Disc PolySwitch Device
Rechargeable Li battery pack
Rechargeable Battery Packs

Due to external shorts, runaway charging conditions, or abusive charging,
considerable damage can be sustained in both battery cells and pack surroundings.
The most common applications are for lithium-ion (Li-ion) battery packs used in
cellular phones, digital cameras and laptop/notebook computers or nickel-
cadmium (NiCd) and nickel-metal-hydride (NiMH) battery packs used in other
portable electronic applications.
• LR4, LTP, SRP, VLR, VLP, VTP, MXP
• SFF, SFS
NiMH/NiCd Battery Pack Circuit Diagram Single Cell Li-ion/Li-Polymer Battery Pack Circuit Diagram
Portable Electronics
PolySwitch Device
PolySwitch Device +
+
Li-ion/
Li-Polymer Control
n x 1.2V Thermistor IC
Cell Thermistor
Ident Ident
– –
Linear AC/DC Adapters

Linear AC/DC adapters, or “wall warts”, can be used in both battery charging
applications and in low-cost DC power supplies for a variety of consumer
equipment. Short circuits or excessive current draw can result in transformer
winding overtemperature. PolySwitch devices can help end products meet UL
requirements.
• RTEF, RUEF, RXEF • nanoSMD, microSMD, miniSMD, SMD • SFS, SFH
Example of an Unregulated Linear Adapter Transformer Equivalent Circuit
Protected by a PolySwitch Device
RLF CL Rs RP/n2 Rprotection
PolySwitch
110/ 10Vac Device (reflected
220V OV rms 10-12V DC primary resistance)
AC In Unregulated VIN/n PolySwitch Device LOAD
(rectified)
Is
Primary/Secondary
Turns Ratio = 12/24:1 Rs = secondary winding series resistance
RP = primary winding reflected resistance
CL = Current Limiting Device n = turns ratio
Portable Electronics Input Ports

The use of an incorrect or faulty adapter/charger can irreparably damage
unprotected portable electronics equipment. Typical applications include cellular
phones, PDAs, and digital cameras.
Typical Portable Electronics Charging Circuit with Protection
• SFS, SFH Alternative Position
• ZEN
PolySwitch PolySwitch
Device Strap Device
Charge 3x NiMH
Control IC
DC
Input PWM Ident
OC1 OC2
Battery Pack
22
Application
Summaries
Transformers
A short circuit can cause high currents, which produce high temperatures and can
damage the power supply.
• RGEF, RHEF, RUEF, RXEF
• LVR
•
•
SMD
SFS, SFF
2
Transformer Circuit
R CL
AC OV
Input

Portable Electronics using PolyZen Devices

The PolyZen device’s unique ability to withstand high inrush currents make it
Portable Electronics
suitable to protect portable electronics and other low-power DC devices such as
cell phones, PDAs, MP3 players, digital cameras and USB hubs. Transient protection
is particularly important for peripherals that can be powered off computer and
automotive power busses. PolyZen devices are designed to help lock out
inappropriate power supplies and are especially effective at clamping and
smoothing inductive voltage spikes.
• ZEN
Typical Circuit – “On Board” Protection Power Conditioning (AC to DC converter output)
Regulated PolyZen
DC Power PolyZen Device
Source AC To
Device
Source Peripheral
AC
VOUT to
DC
Connector
Power
Connector
Connector
Power
Power
23
Application Solution Guide
Overcurrent Overvoltage Hybrid

Circuit Protection Circuit Protection Protection
PolySwitch Slow-Blow Fast-Acting High-Current- Telecom 2Pro PolyZen
Devices Chip Fuses Chip Fuses Rated Chip Fuses Fuses GDT ESD SESD Devices Devices
AUTOMOTIVE ELECTRONICS
Electronic control modules x x x x x x
HVAC and climate control x x x x
3 Junction boxes and wire harnesses x
Lamp protection x
DC Motor protection x
Power outlet protection x
Powered antennae x
Telematics powered components x x x x x x x
Infotainment and navigation systems x x x x x x x
Chargeable devices x x x x x x x
COMMUNICATIONS
Analog and digital linecards x x x x x
Central office equipment, linecards x x x x x x
LAN, WAN equipment x x x x x x x x
MDF modules x x x
PBX, key telephone systems x x x x x x
PoE (Power over Ethernet) systems x x x x x
Set-top boxes (cable & satellite) x x x x x x x x
Telephone, fax, modem x x x x x x x x x
VolP (Voice over Internet Protocol)

x x x x x x x
equipment
xDSL modems and splitters x x x x x x x x
Servers x x x x x x x x
Power supplies x x x
Voltage regulator modules (VRMs) x x
CONSUMER ELECTRONICS
HDDs (Hard Disk Drives) x x x x x
IEEE 1394 ports x x x x
Inverters x
Controller boards x
USB 2.0/3.0 & IEEE x x x x
USB flash memory modules x x x
USB hub, ports and peripherals x x x x
Video ports: HDMI, DVI, VGA x x x x
LED backlighting x x x x x
24
Application
Solution Guide
PolySwitch Slow-Blow Fast-Acting High-Current- Telecom 2Pro PolyZen
PORTABLE ELECTRONICS
Audio MP3 players x x x x x
Battery packs x x x x x
Cell Phones and PDAs x x x x x

3
Digital still / video cameras x x x x x
Portable game devices x x x x x
INDUSTRIAL ELECTRONICS
Displays x x x x x
Industrial controls-RS485, RS232 x x x x x x
Security systems x x x x x x x x
Surge suppression x x x
UPS (Uninterruptible Power Supply) x x x x
APPLIANCES AND HVAC
Electronic PCB’s and controllers x x x x x x
Motor and compressor winding

x
protection
Power tools x x
Transformer protection x x
LED LIGHTING
Indoor Lighting x x x x x x x
Outdoor/Street/Signal/Stadium
x x x x x x x
Lighting
Table Lamp/Portable Lighting x x x x x x
MEDICAL ELECTRONICS
Digital surface thermometers x x
Blood glucose monitors x x x x
Blood pressure monitors x x x x x x
Automated external defibrillator (AED) x x x x
Infra-red ear thermometers x x
Electrocardiograms x x x x x x
Magnetic resonance imaging x x x x x
Ultrasound devices x x x x x x
Pulse oximeters x x x
Patient monitors x x x x x x x
25
Solar / Wind Generating / PolySwitch Slow-Blow Fast-Acting High-Current- Telecom 2Pro PolyZen
Renewable Energy Electronics
Controller Boards /
x x x x
Human Interface Panels
3 DC / AC Inverters
Wiring/Cable/Connector/
x x
x
Coupler Protection
Communications Interfaces x x x x
Tracking Motors x
Monitors x x x
Modules x x
Battery backup/Systems x
Uninterruptible Power Supply (UPS) x x
26
PolyZen Devices
PolyZen Devices
Polymer Protected Zener Diode
PolyZen devices are polymer enhanced precision Zener

diode micro-assemblies that help protect sensitive
electronics from damage caused by inductive voltage
spikes, voltage transients, use of incorrect power supplies
and reverse bias.
The PolyZen micro-assembly incorporates a stable

Zener diode for precise voltage clamping and a
resistively non-linear, polymeric positive temperature
coefficient (PPTC) layer that responds to either diode
heating or overcurrent events by transitioning from a
low to high resistance state.
4
PolyZen devices help provide resettable protection
against damage caused by multi-watt fault events and
require only 0.7W power dissipation. In the event of
sustained high power conditions, the PPTC element of
the device “trips” to limit current and generate voltage
drop. This functionality helps protect both the Zener
and the follow-on electronics, effectively increasing the
diode’s power handling capacity.
Benefits Features
• Helps shield downstream electronics from overvoltage • RoHS compliant
and reverse bias • Overvoltage transient suppression
• Trip events shut out overvoltage and reverse bias • Hold currents up to 2.3A
sources
• Time delayed, overvoltage trip
• Analog nature of trip events minimize upstream
• Time delayed, reverse bias trip
inductive spikes
• Power handling on the order of 30 watts
• Helps reduce design costs with single component
placement and minimal heat sinking requirements • Integrated device construction
Applications
• Portable media players • Cellphone charger port and USB power
• Global positioning systems • Automotive peripheral input power
• Hard disk drives 5V & 12V bus • DC power port protection
• Solid State Drives (SSD) 5V bus • Industrial handheld POS
27
Figure PZ1 Typical Application Block Diagram for PolyZen Devices
Power Supply
(External or internal) Protected Electronics
GND
2
VIN
PolyZen
1 Device
+ VOUT
3
Regulated RLOAD
Output
Protected downstream
electronics
Table PZ1 Electrical Characteristics for PolyZen Devices
4 (Performance ratings @ 25°C unless otherwise specified)
VZ(V) VINT MAX IFLT MAX

IHOLD Test Test
IZt @ 20°C RTyp R1MAX VINT MAX Current IFLT MAX Voltage
Part Number Min. Typ. Max. (A) (A) (Ω) (Ω) (V) (A) (A) (V)
ZEN056V130A24LS 5.45 5.6 5.75 0.1 1.3 0.12 0.16 24V 3A +10/-40 +24/-16V
ZEN065V130A24LS 6.35 6.5 6.65 0.1 1.3 0.12 0.16 24V 3A +6/-40 +24/-16V
NEW ZEN098V130A24LS 9.60 9.8 10.00 0.1 1.3 0.12 0.16 24V 3A +3.5/-40 +24/-16V
ZEN132V130A24LS 13.20 13.4 13.60 0.1 1.3 0.12 0.16 24V 3A +2/-40 +24/-16V
ZEN164V130A24LS 16.10 16.4 16.60 0.1 1.3 0.12 0.16 24V 3A +1.25/-40 +24/-16V
ZEN056V230A16LS 5.45 5.6 5.75 0.1 2.3 0.04 0.06 16V 5A +5/-40 +16/-12V
ZEN065V230A16LS 6.35 6.5 6.65 0.1 2.3 0.04 0.06 16V 5A +3.5/-40 +16/-12V
ZEN132V230A16LS 13.20 13.4 13.60 0.1 2.3 0.04 0.06 16V 5A +2/-40 +20/-12V
ZEN056V075A48LS 5.45 5.6 5.75 0.1 0.75 0.28 0.45 48V 3A +10/-40 +48/-16V
ZEN132V075A48LM 13.20 13.4 13.60 0.1 0.75 0.28 0.45 48V 3A +2/-40 +48/-16V
NEW ZEN056V115A24LS 5.45 5.6 5.75 0.1 1.15 0.15 0.18 24V 3A +10/-40 +24/-16V
NEW ZEN056V130A24GS 5.45 5.6 5.75 0.1 1.30 0.12 0.18 24V 3A +6/-40 +24/-16V
Coming*
Soon ZEN059V130A24LS† 5.80 5.9 6.00 0.1 1.30 0.12 0.16 24V 3A +6/-40 +24/-16V
* Data is preliminary
† Maximum Reverse Leakage Current = 650µA@5.0V meets USB suspend mode specification
Table PZ2 Definitions of Terms for PolyZen Devices
VZ Zener clamping voltage measured at current IZt and 20°C. Polymer PTC
IZt Test current at which VZ is measured.
VIN
IHOLD Maximum steady state current IPTC that will not generate a trip event at the specified temperature. VOUT
Ratings assume IFLT = 0A. Zener
Diode
RTyp Typical resistance between VIN and VOUT pins when the device is at room temperature.
R1MAX The maximum resistance between VIN and VOUT pins, at room temperature, one hour after first trip GND
or after reflow soldering.
IFLT Current flowing through the Zener diode. IPTC IOUT
IFLT MAX Maximum RMS fault current the Zener diode component of the device can withstand and remain
VIN
resettable; testing is conducted at rated voltage with no load connected to VOUT. VOUT
VINT MAX The voltage (VIN - VOUT “post trip”) at which typical qualification devices (98% devices, 95%
IFLT
confidence) survived at least 100 trip cycles and 24 hours trip endurance when “tripped” at the
specified voltage and current (IPTC).
Trip Event A condition where the PPTC transitions to a high resistance state, thereby limiting IPTC, and GND
significantly increasing the voltage drop between VIN and VOUT.
28 RoHS Compliant, ELV Compliant

PolyZen Devices
Figure PZ2-PZ9 Typical Performance Curves for PolyZen Devices
Figure PZ2 Figure PZ3

VOUT Peak vs IFLT RMS (IOUT = 0) Time-to-Trip vs IFLT RMS (IOUT = 0)
22.0 10
A = ZEN056V1yyA24LS/GS A = ZEN056V1yyA24LS/GS
20.0
E B = ZEN065V130A24LS B = ZEN065V130A24LS
18.0
C = ZEN098V130A24LS C = ZEN098V130A24LS
16.0
Time-to-Trip (Sec)
D D = ZEN132V130A24LS D = ZEN132V130A24LS
VOUT Peak (V)
14.0 1
E = ZEN164V130A24LS E = ZEN164V130A24LS
12.0
C
10.0
E
8.0
B A 0.1
6.0 D B A
C
4.0
2.0
0 0.01
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
IFLT RMS (A) IFLT RMS (A)

VOUT Peak vs IFLT RMS (IOUT = 0) Time-to-Trip vs IFLT RMS (IOUT = 0) 4
22.0 100
A = ZEN056V230A16LS A = ZEN056V230A16LS
20.0
B = ZEN065V230A16LS B = ZEN065V230A16LS
18.0
C C = ZEN132V230A16LS C = ZEN132V230A16LS
10
16.0
Time-to-Trip (Sec)
VOUT Peak (V)
14.0
12.0
1
10.0
8.0
B
6.0 A B
0.1 C A
4.0
2.0
0 0.01
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10

VOUT Peak vs IFLT RMS (IOUT = 0) Time-to-Trip vs IFLT RMS (IOUT = 0)
0.0 100
A = ZENxxxV1yyA24LS/GS A = ZENxxxV1yyA24LS/GS
B = ZENxxxV230A16LS B = ZENxxxV230A16LS
-0.2
C = ZENxxxV075A48LS/M 10 C = ZENxxxV075A48LS/M
Time-to-Trip (Sec)
-0.4
VOUT Peak (V)
1
-0.6
0.1
-0.8
B
0.01
-1.0
A
A
B C C
-1.2 0.001
-50 -40 -30 -20 -10 0 -50 -40 -30 -20 -10 0

Temperature Effect on IHOLD (IFLT = 0) Time-to-Trip vs IPTC RMS (IFLT = 0)
3.5 10
A = ZENxxxV130A24LS/GS A = ZENxxxV1yyA24LS/GS
3.0 B = ZENxxxV230A16LS B = ZENxxxV230A16LS
B
C = ZENxxxV075A48LS/M 1 C = ZENxxxV075A48LS/M
Time-to-Trip (Sec)
2.5
D = ZENxxxV115A24LS
IHOLD (A)
2.0
A
0.1
1.5
D
1.0
C 0.01
B
0.5
A
C
0.0 0.001
-40 -20 0 20 40 60 80 100 0 5 10 15 20 25 30 35 40 45
Ambient Temperature (˚C) IPTC RMS (A)
RoHS Compliant 29
Table PZ3 General Characteristics for PolyZen Devices
Operating temperature range -40° to +85°C

Storage temperature -40° to +85°C
ESD withstand 15kV Human body model
Diode capacitance 4200pF Typical @ 1MHz, 1V RMS
Construction RoHS compliant
Figure PZ10-PZ22 Basic Operation Examples for PolyZen Devices
Figure PZ10
Hot-Plug Response
ZEN056V130A24LS vs a 22V/120W Universal Power Supply
35 350
C A = VIN
Capacitive
30 Current Spike B = VOUT 300
Supply Voltage
Supply Voltage returns to normal C = CURRENT (IFLT)
4
Voltage (V) and Current (A)
Current Pulled to dropped by current D = POWER 250

25
GND via diode A
Power (Watts)
20 200
D
15 150
PPTC switches to Output Voltage
high resistance remains clamped
10 100
A
B
5 B 50
VOUT Peak D
C
0 0
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08
Time (Sec)

Typical Fault Response: ZEN056V115A24LS Typical Fault Response: ZEN056V130A24LS
20V, 3.5A Current Limited Source (IOUT=0) 24V, 3.5A Current Limited Source (IOUT=0)
20 20
A = VIN (V)
A A = VIN (V)
A
18 18
B = VOUT (V) B = VOUT (V)
Voltage (V) or Current (A)
16 16
C = IFLT (A) C = IFLT (A)
14 14
12 12
10 10
8 8
6
B 6 B
4 4
2 2
C C
0 0
-0.02 0.02 0.06 0.10 0.14 0.18 -0.02 0.02 0.06 0.10 0.14 0.18
Time (s) Time (s)

26 24
A
24 A = VIN (V) 22 A = VIN (V)
A
22
B = VOUT (V) 20 B = VOUT (V)

20 C = IFLT (A) 18 C = IFLT (A)
18
16
16
14
14
12 B
12
10
10
B 8
8
6 6
4 4
2 2
C C
0 0
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10 0.00 0.05 0.10 0.15
Time (s) Time (s)

PolyZen Devices
Figure PZ16-PZ22 Basic Operation Examples for PolyZen Devices Cont’d

30 30
A = VIN (V) A = VIN (V)

25 A 25 A
20 20 B
B
15 15
10 10
5 5
C C
0 0
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.00 0.10 0.20 0.30 0.40 0.50
Time (s) Time (s)

Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
4
20 20
A = VIN (V) A = VIN (V)

B = VOUT (V) A B = VOUT (V) A
15 C = IFLT (A) 15 C = IFLT (A)
10 10
B
B
5 5
C C
0 0
0.00 0.10 0.20 0.30 0.00 0.10 0.20 0.30
Time (s) Time (s)

22 50
A = VIN (V) A A = VIN (V) A
20
18 40
16
B
14
30
12
10
20
8
6
4 10
B
2
C C
0 0
0 0.05 0.10 0.15 0.20 0.25 0.30 0.00 0.01 0.02 0.03 0.04
Time (s) Time (s)

Typical Fault Response: ZEN132V075A48LM Typical Fault Response: ZEN056V130A24GS
50 24
A A
A = VIN (V) 22 A = VIN (V)
45

20
40
C = IFLT (A) 18 C = IFLT (A)
35
16
30 14
25 12
20 10
B 8
15
6 B
10
4
5 2
C C
0 0
0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Time (s) Time (s)
RoHS Compliant 31
Table PZ4 Packaging and Marking Information for PolyZen Devices
Part Number Bag Quantity Tape & Reel Quantity Standard Package
ZENxxxVyyyAzzLS/M - 3,000 15,000
ZENxxxVyyyAzzGS - 4,000 20,000
Table PZ5 Dimensions for PolyZen Devices
ZENxxxVyyyAzzLS/M Devices
A B C
Min. Max. Min. Max. Min. Max.
mm 3.85 4.15 3.85 4.15 1.4 2.0
C
inch (0.152) (0.163) (0.152) (0.163) (0.055) (0.081)
4 B
ZENxxxVyyyAzzGS Devices
L W H W
Min. Max. Min. Max. Min. Max.
mm 3.85 4.15 3.85 4.15 1.16 1.25
inch (0.152) (0.163) (0.152) (0.163) (0.046) (0.049)
L
Table PZ6 Pad Layout and Configuration Information for PolyZen Devices
Pin Number Pin Name Pin Function

1 VIN VIN = Protected input to Zener diode
2 GND GND = Ground
3 VOUT VOUT = Zener regulated voltage output
Pin Configuration
(Top View) Pad Dimensions
0.94mm
2 GND (0.037”)
VIN 1 2.21mm 0.33mm
(0.087”) (0.013”)
0.94mm
3 VOUT
(0.037”)
0.56mm 2.88mm 0.56mm

(0.022”) (0.1135”) (0.022”)

PolyZen Devices
Solder Reflow and Rework Recommendation for PolyZen Devices
Classification Reflow Profiles

Profile Feature Pb-Free Assembly
Average ramp up rate (TsMAX to Tp) 3°C/second max.
Preheat
• Temperature min. (TsMIN) 150°C
• Temperature max. (TsMAX) 200°C
• Time (tsMIN to tsMAX) 60-180 seconds
Time maintained above:
• Temperature (TL) 217°C
• Time (tL) 60-150 seconds
Peak/Classification temperature (Tp) 260°C
Time within 5°C of actual peak temperature
Time (tp) 20-40 seconds
Ramp down rate 6°C/second max.
Time 25°C to peak temperature 8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
4
Figure PZ23
tp
Tp Critical Zone
Ramp up TL to Tp
TL
TsMAX tL
Temperature
TsMIN
ts
Preheat Ramp down
25
t 25˚C to Peak
Reflow Profile Time
Tape and Reel Specifications for PolyZen Devices (in Millimeters)
Figure PZ24 EIA Referenced Taped Component Dimensions for PolyZen Devices (in Millimeters)
Description ZENxxxVyyyAzzLS/M Devices ZENxxxVyyyAzzGS Devices

A0 4.35 4.35
B0 4.35 4.35
K0 2.30 1.80
8.00
ø1.5 + 0.1 / -0.0
4.00Note 1
ø1.50 Min
0.35 ± 0.05 0.25 R A
2.00 ± 0.05Note 3 1.75 ± 0.10
R 0.3 Max
5.50 ± 0.05Note 3
B0
12.0 ± 0.3
K0
A0 0.25 A
Notes:
1. 10 sprocket hole pitch cumulative tolerance ±0.2
2. Camber in compliance with EIA 481
3. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole
RoHS Compliant 33
Figure PZ25 Reel Dimensions for PolyZen Devices (in Millimeters)
Matte Fi nish These Area

Description Dimension (mm) Lock Feature (6 places)
AMax 330
NMin 102
W1 8.4
ø20.0 Min NMin
W2 11.1 AMax
+0.25
330.0 –4.00 102.0 Ref
+0.5
ø13.0 –0.2
2.0 +/– 0.5

Detail A
See “Detail A”
W1 (measured at hub)
Part Numbering System for PolyZen Devices

4
ZEN 056V 130A 24 LS/M & GS
Special Labeling
LS or M = Module Height of 2.0mm
GS = Module Height of 1.25mm
VINT Max Rating (24 = 24V)
PPTC Hold Current Group (130 = 1.3A)
Zener Voltage Group (056 = 5.6V)
PolyZen Series
Part Marking System for PolyZen Devices
ZENxxxVyyyAzzLS/M Devices ZENxxxVyyyAzzGS Devices
Zener Diode Voltage Rating

056 = 5.6V Zener Diode Voltage Rating
059 = 5.9V 056 = 5.6V
065 = 6.5V
098 = 9.8V t056
132 = 13.4V 1234567 Batch Number
t056 164 = 16.4V
12345 Batch Number
Warning :
All information, including illustrations, is believed to be accurate and reliable. Users, however, should independently evaluate the suitability of and
test each product selected for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the
information, and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Tyco Electronics’ Standard Terms and
Conditions of Sale for this product, and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from
the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right
to make changes to materials or processing that do not affect compliance with any applicable specification without notification to Buyer.

2Pro Devices
2Pro Devices
The 2Pro product is an integrated overcurrent/over-

voltage protection device. The RoHS-compliant
component incorporates PolySwitch PPTC (Polymeric
Positive Temperature Coefficient) and metal oxide
varistor technology in a single device to help reduce
board space requirements and component count.
Damage to telephony communications equipment can

be caused by various sources including lightning,
electrostatic discharge (ESD), power contact and
induction with AC lines. The 2Pro TM2P-10271 devices
help provide current limiting during overcurrent events,
and voltage clamping during overvoltage events. After 5
a fault condition is removed and power is cycled, 2Pro
devices will reset so that the equipment remains
operational.
The 2Pro device helps address the need for resettable

circuit protection devices for use in cost-sensitive PSTN
(Public Switched Telephone Network) and VoIP (Voice over Internet Protocol) telephony equipment. The
widespread use of VoIP gateways in homes and enterprise environments as the primary means of voice delivery
requires the utmost safety and reliability in equipment. 2Pro circuit protection devices help manufacturers comply
with global safety standards, including UL 60950, TIA-968-A, IEC 60950, and ITU-T K.20/K.21. The UL 497A listed
protector also helps provide ESD protection.
Benefits Features
• Single device helps reduce component count and • RoHS compliant
footprint • Halogen free
• Helps reduce warranty returns (refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm)
• Helps equipment comply with surge tests per: • Single overcurrent, overvoltage and ESD protection
TIA-968-A, IEC 60950, ITU-T K.20/K.21 device
• Helps simplify UL 60950 testing • Resettable overcurrent protection
• Helps equipment comply with UL 60950 • UL 497A listed protector (#E258475)
Applications
• Cordless telephones • Set-top boxes
• VoIP gateways • Security systems
• Fax machines • MDF modules
• Data modems • Analog and ISDN linecards
35
Table 2P1 Electrical Characteristics for 2Pro Devices
Overcurrent (terminals 1 – 2) — Performance ratings @ 20°C Electrical Schematic
Resistance† Time to Trip (s)†
IHOLD ITRIP (Ω) @ 1A
Part Number (A) (A) RMIN RMAX R1MAX* Typ. Max. (1) (2)
TM2P-10271 0.15 0.30 6.5 14.0 16.0 0.9 3
Overvoltage (terminals 2 – 3)
Varistor Voltage DC Resistance Maximum Clamping Rated
V @ 1mA @ 100V Voltage @ 25A Wattage
(3)
Part Number DC(V) Tolerance (MΩ) (V) (W)
TM2P-10271 260 +14% -7% >10 455 0.25
* Maximum device resistance at 20°C measured 1 hour post trip.
† Corresponds to operation below varistor voltages.
Table 2P2 Dimensions for 2Pro Devices

A C
A B C D E F
Min. Max. Min. Max. Min. Max. Min. Max. Nom. Min. Max.
F
mm — 12.0 — 15.0 — 6.6 6.0 — 2.5 — 12.0 B
inch* — (0.47) — (0.59) — (0.26) (0.24) — (0.10) — (0.47)

MOV
5 * The dimensions in inches are rounded approximations.

PPTC
D
E
Center to Center
Typ.
(3) (2) (1)
Figure 2P1 Typical Time-to-Trip at 25°C for 2Pro Devices
100
PPTC only
TM2P at 600VAC
10
Time-to-Trip (Sec)
0.1
0.01
0.001
0.1 1 10 100
Short Circuit Current (A)
Table 2P3 Physical Characteristics and Environmental Specifications for 2Pro Devices
Physical Characteristics
Lead material Tin-plated copper, 0.33mm2 (22AWG), ø0.64mm (0.025in.)

Flammability IEC 695-2-2 needle flame test for 20s
Soldering characteristics ANSI approved IPC/EIA/JEDEC J-STD-002, Category 3
Solder heat withstand per IEC-STD 68-2-20, Test Tb, Method1A, Condition B, can withstand 10 seconds at 260°C ± 5°C
Environmental Specifications
Test Conditions
Passive aging 60°C, 1000 hours / 85°C, 1000 hours
Humidity aging 85°C, 85% RH, 500 hours
Active aging 60°C, 90% RH, 60VDC bias,1000 hours
Thermal shock 125°C, -55°C (10 times)
Solvent resistance MIL-STD-202, Method 215K
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use.
Devices may not meet specified values if these storage conditions are exceeded.
36 RoHS Compliant, ELV Compliant HF Halogen Free

2Pro Devices
Table 2P4 Packaging and Marking Information for 2Pro Devices
Part Number Bag Quantity Tape & Reel Quantity Standard Package Part Marking Agency Recognition
TM2P-10271 500 - 10,000 1027 & Batch # UL 497A/File No. E258475
TM2P-10271-2 - 1,000 5,000 1027 & Batch # UL 497A/File No. E258475
Table 2P5 Ordering Information for 2Pro Devices
Bulk 500 pieces/bag

10,000 pieces/box
Tape & Reel 1,000 pieces/reel
5,000 pieces/box
Wave Soldering and Rework Recommendations for 2Pro Devices
Recommended Wave Soldering for Radial-leaded Devices Figure 2P2

• Soldering temperature profile 300
10s
Temperature characteristic at component terminal with dual
250 245˚C ... 260˚C
wave soldering
Temperature (˚C)
200
Rework 150
5
• If a device is removed from the board, it should be discarded 100˚C ... 130˚C
and replaced with a new device. 100
Forced cooling
50
0
0 50 100 150 200 250
Time (s)
Table 2P6 Tape and Reel Specifications for 2Pro Devices (in Millimeters)
2Pro devices are available in tape and reel packaging per EIA 468-B standard. See Figures 2P3 and 2P4 for details.
Description EIA Mark IEC Mark Dimension (mm) Tolerance
Carrier tape width W W 18 -0.5/ +1.0
Hold down tape width W4 W0 5 Minimum
Top distance between tape edges W6 W2 3 Maximum
Sprocket hole position W5 W1 9 -0.5/ +0.75
Sprocket hole diameter D0 D0 4 ±0.2
Abcissa to plane (kinked lead)* H0 H0 16 -0.5/0.6
Abcissa to top H1 H1 32.2 Maximum
Overall width with lead protrusion - C1 43.2 Maximum
Overall width without lead protrusion - C2 42.5 Maximum
Lead protrusion L1 I1 1.0 Maximum
Protrusion of cut-out L L 11 Maximum
Protrusion beyond hold down tape I2 I2 Not specified -
Sprocket hole pitch P0 P0 12.7 ±0.3
Pitch tolerance - - 20 consecutive ±1
Tape thickness t t 0.9 Maximum
Tape thickness with splice* t1 - 2.0 Maximum
Splice sprocket hole alignment - - 0 ±0.3
Body lateral deviation ⌬h ⌬h 0 ±0.1
Body tape plane deviation ⌬p ⌬p 0 ±1.3
Ordanate to component center lead P2 P2 6.35 ±0.7
Lead spacing* F1, F2 F1, F2 2.54 -0.1/+0.4
Reel width w2 w 56 Maximum
Reel diameter a d 370 Maximum
Space between flanges w1 - 51.2 Maximum
Arbor hole diameter c f 26 ±12.0
Core diameter n h 80 Maximum
Box - - 56/372/372 Maximum
Consecutive missing pieces* - - 3 maximum -
Empty places per reel* - - Not specified -
Note: *Differs from EIA specification.
RoHS Compliant, ELV Compliant HF Halogen Free 37

Figure 2P3 EIA Referenced Taped Component Dimensions for 2Pro Devices
Dh Dh Dp Dp
Reference plane
H1 P1 H1 C2
W6
F C1
H
L A B H0
W5
W4
W
I2
L1 P0 D0 Direction of unreeling
F1 F2
P2
Cross section A-B
t1 t
Figure 2P4 EIA Referenced Reel Dimensions for 2Pro Devices
5 Reel
Upper side
n
Type
a Direction of
unreeling
Lower side
c
w1
Cross section
w2
Optional shape: Circular or polygonal
Part Numbering System for 2Pro Devices

TM 2P- 10 271 -2
Packaging
Blank : Bulk
-2 : Tape & reel
Varistor voltage indicator
The first two digits indicate voltage.
The third digit signifies the power of ten.
For example : 220 : 22 x 100 = 22V
221 : 22 x 101 = 220V
112 : 11 x 102 = 1100V
Typical PPTC resistance (ohms)
2Pro Series
Telecom Module
Warning :

Silicon ESD Protection Devices
Silicon ESD Protection Devices NEW
Silicon ESD (SESD) devices help protect electronic

circuits against damage from electrostatic discharge
(ESD) events. The 0201-sized SESD device’s miniature
footprint – measuring 0.6mm x 0.3mm x 0.3mm - is
approximately 70 percent smaller than prior-generation
devices, offering designers flexibility in space-
constrained applications.
The SESD0201C-006-058 device is a bi-directional and

ultra-low capacitance 0.6 picofarad (pF) device that is
suitable for helping to protect very-high-speed data
lines, such as USB and HDMI, or low-voltage antenna
ports. The device’s ultra-low capacitance, low insertion
loss (<0.5dB up to 3GHz), and high linearity of
capacitance versus frequency helps minimize signal
degradation.
The SESD0201C-120-058 device is a higher-capacitance 6

(12pF) bi-directional device that can be used for low-
speed generic interfaces such as keypads, power
buttons, speakers, and microphone ports in portable electronics. Both SESD0201C-006-058 and SESD0201C-120-
058 devices offer 8kV contact and 15kV air discharge protection per the IEC61000-4-2, level 4 standard.
Also included in the product line is the SESD0402S-005-054 device, an ultra-low-capacitance SOD-923 (0402-
size package) uni-directional device with 0.5pF typical capacitance. This device offers a 10kV contact discharge
rating per IEC61000-4-2, level 4 and can be used with digital applications such as USB and HDMI.
Benefits Features
• Small size SESD protection diodes for high • RoHS compliant
speed signals • Halogen free
• ESD protection in space-constrained portable (refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm)
electronics and mobile handsets • Low-leakage current – 1.0µA (max)
• Helps protect electronic circuits against damage • Low-breakdown voltage < 5.8V
from ESD
• Capable of withstanding numerous ESD strikes
• Assist equipment to pass IEC61000-4-2,
• Low capacitance and insertion loss
level 4 testing
• SOD-923 case epoxy material meets UL 94 V-0
• SESD0402S devices meet MSL-1 requirements
Applications
• Mobile phones and portable electronics • USB 2.0/3.0, HDMI 1.3/1.4, and DisplayPort
• High-speed data lines (low capacitance 0201 and 0402) • Applications requiring high ESD performance in a
• Low-voltage antenna ports (bi-directional 0201) small package
39
Table SE1 Maximum Ratings for SESD Devices
IEC61000-4-2, level 4 (ESD Withstand) Temperature Total Power Dissipation
Contact Air Operating Storage on FR-4 board*
Part Number (kV) (kV) (°C) (°C) (mW)
SESD0201C-006-058 ±8 ±15 -40 to +125 -40 to +125 150
SESD0201C-120-058 ±8 ±15 -40 to +125 -40 to +125 250
SESD0402S-005-054 ±10 ±15 -55 to +125 -55 to +150 250
*FR-4 board = 30mm x 30mm x 2mm
Table SE2 Electrical Characteristics @T=25°C for SESD Devices

Input Capacitance*
Typical Maximum Leakage Current (max) Breakdown Voltage (min) Working Reverse Voltage
Part Number (pF) (pF) IL @ VWRV = 5.0V (µA) Vbr @ IT** = 1mA (V) VWRV @ peak (V)
SESD0201C-006-058 0.6† 0.9 1.0 ±5.8 5.0
SESD0201C-120-058 12.0 13.5 1.0 ±5.8 5.0
SESD0402S-005-054 0.5‡ 0.9 1.0 +5.4 / -1.0 5.0
* @ Vr=0V, f=1MHz
† 0.19pF@f=3GHz
‡ 0.17pF@f=3GHz
** Vbr is measured at test current IT
Figure SE1-SE2 Capacitance vs Frequency for SESD Devices
6 Figure SE1 Figure SE2

SESD0201C-006-058 SESD0402S-005-054
Capacitance vs Frequency to 3GHz Capacitance vs Frequency to 3GHz
1.0 1.0
0.9 0.9
0.8 0.8
Capacitance (pF)
Capacitance (pF)
0.7 0.7
0.6 0.6
0.5 0.5
0.4 0.4
0.3 0.3
0.2 0.2
0.1 0.1
0 0
10 100 1000 10000 10 100 1000 10000
Frequency (MHz) Frequency (MHz)
Figure SE3-SE4 Insertion Loss Diagram for SESD Devices
Figure SE3 Figure SE4

SESD0201C-006-058 SESD0402S-005-054
Insertion Loss to 6GHz Insertion Loss to 6GHz
0 0
Insertion Loss (dB)
Insertion Loss (dB)
-1 -1
-2 -2
-3 -3
-4 -4
-5 -5
1 2 3 4 5 6 1 2 3 4 5 6
Frequency (GHz) Frequency (GHz)
Applications Insertion Loss @Frequency (GHz) Applications Insertion Loss @Frequency (GHz)
HDMI 1.3 (1080p) -0.205 2.25 HDMI 1.3 (1080p) -0.300 2.25
HDMI 1.3 (max spec) -0.354 3.40 HDMI 1.3 (max spec) -0.735 3.40
DisplayPort -0.235 2.70 DisplayPort -0.335 2.70
USB 3.0 -0.791 5.00 USB 3.0 -1.450 5.00

Table SE3 Dimensions for SESD Devices in Millimeters (Mils)*
Part Number A B C D E F G Figure

SESD0201C 0.60 ± 0.03 0.30 ± 0.03 0.27 ± 0.03 0.15 ± 0.03 0.25 ± 0.03 0.25 ± 0.03 0.005 (max) SE5
(23.62 ± 1.20) (11.81 ± 1.20) (10.63 ± 1.20) (5.91 ± 1.20) (9.84 ± 1.20) (9.84 ± 1.20) (0.197) (max)
SESD0402S 1.00 ± 0.05 0.60 ± 0.05 0.37 ± 0.03 0.20 ± 0.05 0.10 ± 0.05 0.80 ± 0.05 0.12 ± 0.05 SE6
39.37 ± 0.40 23.62 ± 0.40 14.57 ± 1.20 7.87 ± 2.00 3.94 ± 2.00 31.50 ± 2.00 4.72 ± 2.00
* Round off approximation
Figure SE5-SE6 Dimension Figures for SESD Devices
Figure SE5 Figure SE6
SESD0201C CSP Package SESD0402S SOD-923 Package
Bottom View Bottom View Side View

A
C
D 1 2
B Pad 1 Pad 2 F G
E
A
D E D
Top View
Side View
A
2
C
B 1 2 6
1
Pad 1 Pad 2 G SOD-923

F
Table SE4 PCB Pad Layout for SESD Devices in Millimeters (Mils)*
Part Number L S W Figure

SESD0201C 0.28 ± 0.01 0.19 ± 0.01 0.30 ± 0.01 SE7
(11.0 ± 0.40) (7.50 ± 0.40) (11.80 ± 0.40)
SESD0402S 0.30 ± 0.01 0.60 ± 0.01 0.40 ± 0.01 SE7
(11.80 ± 0.40) (23.60 ± 0.40) (15.70 ± 0.40)
* Round off approximation
Figure SE7 Figure SE8 Figure SE9
Recommended Landing Pattern

Typical SESD SESD0402S-005-054
PC Board Protected Signal uni-directional board placement
W Pad1 Pad2 cathode anode

Pin1
Pin1 Pin2
Orient Pin1 to Pad1
L S L
SESD0201C can be oriented either direction

Table SE5 Tape and Reel Specifications for SESD Devices
Tape Dimension SESD0201C-006-058 SESD0201C-120-058 SESD0402S-005-054

EIA Mark Dimension (mm) Dimension (mm) Dimension (mm)
A0 0.37 ± 0.03 0.37 ± 0.03 0.66 ± 0.05
B0 0.67 ± 0.03 0.67 ± 0.03 1.06 ± 0.05
D0 1.60 (max) 1.60 (max) 1.60 (max)
D1 1.00 (min) 1.00 (min) 1.00 (min)
E1 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10
E2 5.85 (min) 5.85 (min) 5.85 (min)
F 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05
P0 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10
P1 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05
P2 2.00 ± 0.10 2.00 ± 0.10 2.00 ± 0.10
W 8.00 ± 0.30 8.00 ± 0.30 8.00 ± 0.30
Tape Thickness
EIA Mark Dimension (mm) Dimension (mm) Dimension (mm)
B1 0.67 ± 0.03 0.67 ± 0.03 1.06 ± 0.05
K0 0.35 ± 0.03 0.35 ± 0.03 0.48 ± 0.05
T 0.60 (max) 0.60 (max) 0.60 (max)
T1 0.10 (min) 0.10 (min) 0.10 (min)
T2 1.05 ± 0.03 1.05 ± 0.03 1.05 ± 0.03
Reel Dimension
6 EIA Mark Dimension (mm) Dimension (mm) Dimension (mm)
A 178 (max) 178 (max) 178 (max)
B 1.60 (min) 1.60 (min) 1.60 (min)
C 13.0 ± 0.2 13.0 ± 0.2 13.0 ± 0.2
D 20.2 (min) 20.2 (min) 20.2 (min)
N 50.0 (min) 50.0 (min) 50.0 (min)
W1 9.15 ± 0.75 9.15 ± 0.75 9.15 ± 0.75
W2 14.4 (max) 14.4 (max) 14.4 (max)
W3 10.9 (max) 10.9 (max) 10.9 (max)
Figure SE10 EIA Referenced Taped Component Dimensions for SESD Devices
T øD0 [10 pitches cumulative tolerance

P2 P0
T2 on tape ±0.2mm]
E1
A0
F
W
K0
E2
B1 B0
T1 P1 Embossment
Center Lines of Cavity øD1
Cover Tape
B1 is for tape feeder reference only,

including draft concentric about B0
User Direction of Unreeling

Figure SE11 EIA Referenced Reel Dimensions for SESD Devices
Full Radius
Access Hole at
W3 (Includes flange distortion at outer edge)
Slot Location
(ø40mm min.)
W2 (Measured at hub)
A D C N (Hub diameter,
maximum weight of reel and contents = 13.6kg)
(Arbor hole diameter)
W1 (Measured at hub)
If present,
tape slot in core
B for tape start:
4.5 ± 0.05 width x 10.0mm (min) depth
Definitions of Terms for SESD Devices
IL Reverse Leakage Current @ VRWM

VWRV Working Peak Reverse Voltage
Vbr Breakdown Voltage @ IT
IT Test Current
6
Part Numbering System for SESD Devices
SESD 0402 S - 005 - 054
Breakdown Voltage (min)

054 = 5.4V
058 = 5.8V
Input Capacitance (typ)

005 = 0.5pF
006 = 0.6pF
120 = 12.0pF
Package
C = Chip Scale
S = SOD-923
EIA Size
0201
0402
Series
Silicon ESD
Warning :
All information, including illustrations, is believed to be accurate and reliable. Users, however, should independently evaluate the suitability of
and test each product selected for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of
the information, and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Tyco Electronics Standard Terms
and Conditions of Sale and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from the sale,
resale, use, or misuse of its products. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make
changes to materials or processing that do not affect compliance with any applicable specification without notification to Buyer. Without
expressed or written consent by an officer of Tyco Electronics, Tyco Electronics does not authorize the use of any of its products as components
in nuclear facility applications, aerospace, or in critical life support devices or systems.

6
44
ESD Protection Devices
Tyco Electronics’ ESD line of devices help protect I/O

ports on HDMI 1.3, portable video players, LCD & plasma
TVs, USB 2.0, digital visual interface (DVI), and antenna
switches. ESD devices shunt electrostatic discharge
away from sensitive circuitry in HDTV equipment,
printers, laptops, cellular phones, and other portable
devices.
ESD devices offer many advantages over traditional

protection devices, such as multi layer varistors (MLVs),
which may degrade or distort the signal in high data rate
circuits. Compared to transient voltage suppression
(TVS) diodes and miniature gas discharge tubes (GDTs),
ESD devices provide a more compact form factor and
an economical solution for the shrinking profiles of
today’s compact information appliances.
Available in a range of form factors, our ESD protection

devices provide low capacitance, and meet transmission
line pulse (TLP) testing, as well as IEC61000-4-2 testing. 7
Benefits Features
• ESD protection for high frequency applications • RoHS compliant
(HDMI 1.3) • Halogen free
• Smaller form factor for board space savings (refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm)
• Helps protect sensitive electronic circuits against • 0.25 pF (typical) capacitance
damage caused by electrostatic discharge (ESD) • Low-leakage current
events
• Low-clamping voltage
• Assists equipment to pass IEC 61000-4-2,
• Fast response time (< 1ns)
level 4 testing
• Capable of withstanding numerous ESD strikes
• Compatible with standard reflow installation
procedures
• Thick film technology
• Bi-directional protection
Applications
• HDMI 1.3 interfaces • Printer ports
• LCD & plasma TV • Satellite radios
• Cellular phones • USB 2.0 and IEEE 1394 interfaces
• Antennas • DVI
• Portable video players • GPS systems
• Portable devices (PDA, DSC, BlueTooth)
45
Table E1 Electrical Characteristics for ESD Devices
Continuous Max Typical Typical Typical Capacitance Typical Leakage Max Leakage
Operating Voltage Trigger Voltage* Clamping Voltage† @1 MHz, 1VRMS Current Current @ Max VDC
Symbol VDC VT(TLP) VC(TLP) CP IL(TYP) IL(MAX)
Unit V V V pF µA µA
PESD0402-140 14 250 40 0.25 < 0.01 10.0
PESD0603-240 24 215 45 0.25 < 0.01 10.0
PESD1206Q-240 24 250 45 0.25 < 0.01 10.0
Notes : * TLP test method at 1kV.
† Measured 30ns after pulse initiation.
Typical capacitance value is at 0V and Max Operating Voltage bias.
Figure E1 Capacitance vs. Frequency for ESD Devices

0.30
0.28
0.26
0.24
Capacitance (pF)
0.22
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
0 500 1000 1500 2000 2500 3000
Frequency (MHz)
7 Figure E2 Eye Diagram Performance at 3.4 GHz for ESD Devices
Figure E3 Insertion Loss Diagram for ESD Devices
0.1
-0.1
-0.1dB at 3.4GHz
Insertion Loss (dB)
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
0.3 1 10 100 1000 6000
Frequency (MHz)

Figure E4-E5 ESD Protection for HDMI
Figure E4 Figure E5
ESD Protection for HDMI (0402 and 0603) ESD Protection for HDMI (1206Q)
HDMI HDMI
HDMI Port Transmitter or HDMI Port Transmitter or
Receiver Receiver
TX0+ TX0+
TX0- TX0-
TX01+ TX01+
TX01- TX01-
Outside World
Outside World
TX02+ TX02+
TX02- TX02-
TC+ TC+
TC- TC-
PESD Devices PESD Devices
GND 2 PESD1206Q Arrays GND
Chassia Chassia
Table E2 Dimensions for ESD Devices in Millimeters (Inches)*

A B C D E F
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figure
PESD0402-140 0.90 1.10 0.23 0.43 0.10 0.30 0.40 0.60 — — — — E6
(0.035) (0.043) (0.009) (0.017) (0.004) (0.012) (0.016) (0.024)
PESD0603-240 1.50 1.70 0.45 0.55 0.10 0.50 0.70 1.00 — — — — E6
(0.059) (0.067) (0.018) (0.022) (0.004) (0.020) (0.028) (0.039)
PESD1206Q-240 3.10
(0.122)
3.30
(0.130)
0.40
(0.016)
0.60
(0.024)
0.10
(0.004)
0.30
(0.012) (0.059)
1.50 1.70
(0.067)
0.20
(0.008)
0.60
(0.024)
0.20
(0.008)
0.60
(0.024)
E7 7
*The dimensions in inches are rounded approximations.
Figure E6-E7 Dimension Figures for ESD Devices
Figure E6 Figure E7
D
D
A A A
A
B
B
F B
B
C E F E
C
(side view) (side view)
C C
(drawing not to scale) (drawing not to scale)
Table E3 Environmental Specifications for ESD Devices
Test Conditions Pass / Fail Criteria

Bias humidity test 85°C, 85% RH, VDC (max), 1000 hrs IL ⬉ 10 µA
Thermal shock -55°C to 125°C, 30 min dwell, 1000 cycles IL ⬉ 10 µA
Bias heat test 125°C, VDC (max), 1000 hrs IL ⬉ 10 µA
Bias low temp test -55°C, VDC (max), 1000 hrs IL ⬉ 10 µA
Solderability 250°C ± 5°C, 3 ±1s 95% coverage
Solder heat 260°C, 10s 90% coverage
Vibration 10 to 50Hz, 60s cycle, 2 hrs each in X-Y-Z-direction No physical damage
Solvent resistance IPA ultrasonic 300s No physical damage
Shock 1500G, 0.5ms each, X-Y-Z axis 3 times each axis No physical damage

Table E4 General Characteristics for ESD Devices
Storage temperature -40°C to +85°C

Operating temperature -55°C to +125°C
ESD voltage capability Contact discharge mode : 8kV (typical), 15kV (max)
(tested per IEC 61000-4-2) Air discharge mode : 15kV (typical), 25kV (max) [1 pulse: per customer request]
ESD pulse withstand 100 pulses
(tested per IEC 61000-4-2, level 4,contact method)
Table E5 Materials Information for ESD Devices
RoHS compliant Directive 2002/95/EC compliant

ELV compliant Directive 2000/53/EC compliant
Halogen free Halogen free refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm
Table E6 Recommended Pad Layout for ESD Devices in Millimeters (Inches)*
V W X Y Z
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figure
PESD0402-140 — — 0.60 0.70 0.30 0.40 0.80 0.90 2.10 2.20 E8
(0.024) (0.028) (0.012) (0.016) (0.031) (0.035) (0.083) (0.087)
PESD0603-240 — — 0.90 1.00 0.50 0.60 1.00 1.10 2.70 2.80 E8
7 (0.035) (0.039) (0.020) (0.024) (0.039) (0.043) (0.106) (0.110)
V W X Y Z
Part Number Typ. Typ. Typ. Typ. Typ. Figure
PESD1206Q-240 3.20 2.20 0.50 0.80 1.00 E9
(0.126) (0.087) (0.020) (0.031) (0.039)
*The dimensions in inches are rounded approximations.
Figure E8 Figure E9
X V
W
Z W
Y
Z X Y
Note: Solder thickness 0.15 to 0.2 mm
Table E7 Solder Reflow Recommendations for ESD Devices
A Temperature ramp up 1 From ambient to preheating 30s to 60s Figure E10

temperature Preheating Soldering Cooling
300
B Preheating 140°C - 160°C 60s to 120s
Temperature (˚C)
250
C Temperature ramp up 2 From preheating to main 20s to 40s 200
heating temperature
150
D Main heating at 200°C 60s to 70s 100
at 220°C 50s to 60s 50
at 240°C 30s to 40s
0
at 260°C 5s to 10s A B C D E
E Cooling From main heating 4°C/s max Times (s)

temperature to 100°C

Table E8 Tape and Reel Specifications for ESD Devices
Tape Dimension 0402 0603 1206Q

EIA Mark Dimension (mm) Tolerance Dimension (mm) Tolerance Dimension (mm) Tolerance
W 8.00 ±0.30 8.00 ±0.30 8.00 ±0.30
P0 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10
P1 4.00 ±0.05 4.00 ±0.05 4.00 ±0.05
P2 2.00 ±0.05 2.00 ±0.05 2.00 ±0.05
A0 0.69 ±0.05 1.27 ±0.15 2.02 ±0.20
B0 1.19 ±0.05 2.02 ±0.20 3.62 ±0.20
D0 1.50 ±0.10 1.50 ±0.10 1.50 ±0.10
F 3.50 ±0.05 3.50 ±0.05 3.50 ±0.05
E1 1.75 ±0.10 1.75 ±0.10 1.75 ±0.10
T 0.48 ±0.03 0.60 ±0.03 0.75 ±0.03
Reel Dimensions (0402, 0603 & 1206Q)

EIA Mark Dimension (mm)
A max. 180.0
N min. 60.5
W1 max. 9.5
W2 max. 14.0
Figure E11 EIA Referenced Taped Component Dimensions for ESD Devices
7
P0
T P2
E1
A0 D0 F W
B0
P1
Figure E12 EIA Referenced Reel Dimensions for ESD Devices
W2
W1
A N

Parameter Definitions for ESD Devices
Operation Voltage (VDC)

Defined as DC voltage, under which device is in OFF state and leakage current below certain threshold.
Leakage Current (IL)

Current through device under Operation Voltage VDC.
Trigger Voltage (VT)

Voltage at which the device switches from the OFF to the ON state, during the IEC waveform or the TLP system.
Clamping Voltage (VC)

Voltage cross device under 8 kV per IEC or measured by TLP system. Typically measured 30 ns after initiation of the ESD pulse
(for TLP, both 30ns and 60ns are sometimes used).
Capacitance (CP)
Capacitance of the device measured at 1 MHz with 0V and max operating voltage bias.
Part Numbering System for ESD Devices
PESD xxxx Q - 240
Operating Voltage Designator 24 x 10˚ = 24VDC
7 Array of 4 Elements
EIA Size
Series
Warning :
Application Limitations for PESD0402-140, PESD0603-240 and PESD1206Q-240: These parts are not intended to be used under power
bus applications. Users should independently evaluate the suitability of and test each product selected for their own application.
All information, including illustrations, is believed to be accurate and reliable. Users, however, should independently evaluate the suitability of
and test each product selected for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of
the information, and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Tyco Electronics Standard Terms
and Conditions of Sale and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from the sale,
resale, use, or misuse of its products. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make
changes to materials or processing that do not affect compliance with any applicable specification without notification to Buyer. Without
expressed or written consent by an officer of Tyco Electronics, Tyco Electronics does not authorize the use of any of its products as components
in nuclear facility applications, aerospace, or in critical life support devices or systems.

Gas Discharge Tubes
Gas Discharge Tubes
Tyco Electronics’ GDTs (Gas Discharge Tubes) are placed in

front of, and in parallel with, sensitive telecom equipment
such as power lines, communication lines, signal lines and
data transmission lines to help protect them from damage
caused by transient surge voltages that may result from
lightning strikes and equipment switching operations.
These devices do not influence the signal in normal
operation. However, in the event of an overvoltage surge,
such as a lightning strike, the GDT switches to a low
impedance state and diverts the energy away from the
sensitive equipment.
Our GDTs offer a high level of surge protection, a broad

voltage range, low capacitance, and many form factors
including new surface mount devices, which makes them
suitable for applications such as MDF (Main Distribution
Frame) modules, high data-rate telecom applications (e.g.
ADSL, VDSL), and surge protection on power lines. Their
low capacitance also results in less signal distortion. When
used in a coordinated circuit protection solution with
PolySwitch devices, they can help equipment manufacturers
meet stringent safety regulatory standards.
8
Benefits Features
• Helps provide overvoltage fault protection against • RoHS compliant
damage caused by high energy surges • Halogen free
• Suitable for use in sensitive equipment due to impulse (refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm)
sparkover response • Wide range of voltages (75V-600V)
• Suitable for high-frequency applications • Wide range of form factors
• Highly reliable performance (3mm, 5mm, 6mm, 7mm, 8mm diameter devices)
• New surface-mount devices for automated • Low capacitance and insertion loss
manufacturing • Crowbar device with low arc voltage
• High accuracy spark-over voltages for high precision designs
• Devices tested per ITU K.12 recommendations
• Various lead configurations and surface-mount options
• Optional fail-short mechanism
• Non radioactive materials
Applications
• Telecommunications • Industrial and Consumer Electronics
- MDF modules, xDSL equipment, RF systems, - Power supplies, surge protectors, alarm systems,
antenna, base stations irrigation systems
51
Table G1 Device Voltage Ratings for “R” Series Gas Discharge Tubes
Two Electrode Configuration for R Series GDTs
DC Impulse
Sparkover Sparkover
Voltage Voltage
@ 100V/s
Part Number ± 20% Tolerance @ 1kV/µs
75* 600
90 600
140 600
GTCS23-XXXM-R01-2 150 600
GTCC23-XXXM-R01-2 200 700
230 700
300 900
350 1000
400 1000
* DCSO 60~105
DC Impulse DC
Sparkover Sparkover Holdover On-State
Voltage Voltage Voltage Voltage
@ 100V/s Per Nominal (@1A)

Part Number ± 20% Tolerance @ 100V/µs @ 1kV/µs ITU K.12 (V)
75 450 550 <52 20
90 450 550 <52 20
140 500 600 <80 20
150 500 600 <80 20
200 600 700 <135 20
GTCX25-XXXM-R02 230 600 700 <135 20
GTCX26-XXXM-R05 250 600 700 <135 20
GTCX28-XXXM-R05 260 700 800 <135 20
8 GTCX28-XXXM-R10 300 800 900 <150 20
GTCX28-XXXM-R20** 350 900 1000 <150 20
400 900 1000 <150 20
420 900 1000 <150 20
470 1050 1150 <150 20
500 1100 1200 <150 20
550 1300 1400 <150 20
600 1300 1400 <150 20
** GTCX28-XXXM-R20 parts only up to 350V
Three Electrode Configuration for R series GDTs
DC Impulse
Sparkover Sparkover DC
Voltage Voltage Holdover On-State
(A-E) (B-E) (A-E) (B-E) Voltage Voltage
@ 100V/s Per Nominal (@1A)

Part Number ± 20% Tolerance @ 100V/µs @ 1kV/µs ITU K.12 (V)
75 450 550 <52 20
90 450 550 <52 20
140 500 600 <80 20
150 500 600 <80 20
200 600 700 <135 20
GTCX35-XXXM-R05 230 600 700 <135 20
GTCX36-XXXM-R05 250 600 700 <135 20
GTCX36-XXXM-R10 260 700 800 <135 20
GTCX37-XXXM-R10 300 800 900 <150 20
GTCX38-XXXM-R10 350 900 1000 <150 20
400 900 1000 <150 20
420 900 1000 <150 20
470 1050 1150 <150 20
500 1100 1200 <150 20
550 1300 1400 <150 20
600 1300 1400 <150 20

Gas Discharge Tubes
Device Surge Rating, Capacitance, Insulation Resistance, and Agency Approval
Table G2
for “R” Series Gas Discharge Tubes
Two Electrode Configuration for R Series GDTs
Impulse Impulse
Discharge Withstand Insulation
Current Voltage Capacitance Resistance UL Rating
8x20µs 8x20µs 10x700µs

10 hits 300 hits 10 hits UL497B
Part Number (5 hits each polarity) (150 hits each ploraity) (5 times each polarity) @ 1MHz @ 100VDC* #E179610
GTCS23-XXXM-R01-2 1kA 100A 4kV <0.5pF 1,000 (MΩ) All Devices

GTCC23-XXXM-R01-2 1kA 100A 6kV† <0.5pF 1,000 (MΩ) All Devices
* Devices <=150V measured @ 50VDC
† Effective output impedance: 40ohms.
Impulse
Discharge Impulse AC Discharge Current Insulation
Current Life (1sec duration; 10 hits) Capacitance Resistance UL Rating
8x20µs 10x1000µs UL497B

Part Number 10 hits 300 hits @ 50 Hz @ 1MHz @ 100V #E179610
GTCX25-XXXM-R02 2.5kA 100A 2.5Arms <1pF 10,000 (MΩ) All Devices

GTCX26-XXXM-R05 5kA 100A 5Arms <1pF 10,000 (MΩ) All Devices
GTCX28-XXXM-R10 10kA 100A 10Arms <1pF‡ 10,000 (MΩ) All Devices
GTCX28-XXXM-R20 20kA 100A 20Arms <1.5pF 10,000 (MΩ) All Devices
‡ <1.2pF for 75V and 90V devices.
Three Electrode Configuration for R series GDTs 8

Impulse
Discharge Impulse AC Discharge Current
Current Life (1sec duration; 10 hits) Insulation
(A+B-E) (A+B-E) (A+B-E) Capacitance Resistance UL Rating
8x20µs 10x1000µs UL497B

Part Number 10 hits 300 hits @ 50 Hz @ 1MHz @ 100V** #E179610

** Insulation resistance measured at 50V for devices less than 150V.
Insulation resistance measured at 250V for devices more than 500V.
Figure G1-G2 Typical Circuits for “R” Series Gas Discharge Tubes
Figure G1 Figure G2
Two Electrode Devices for Ungrounded Circuits Three Electrode Devices for Grounded Circuits
PolySwitch Device PolySwitch Device

(A) (A’) (A) (A’)
Telecom Protected Telecom Protected

Line GDT Equipment Line GDT Equipment
(B) Thyristor (B’) (B) Thyristors (B’)

PolySwitch
Device

Figure G3-G10 Dimensions for “R” Series Gas Discharge Tubes
Figure G3 Two Electrode 3mm Product Dimensions

Surface-mount Pad Layout - Surface-mount Devices
(GTCS23-XXXM-R01) (GTCS23-XXXM-R01)
.0
ø3
X Y Z1 Z2
3.0 ± 0.2
X Nom. Nom. Nom. Nom.
mm 3.0 2.0 2.0 2.0
in* (0.118) (0.079) (0.079) (0.079)
1.0 1.0 Z1 Y Z2 * The dimensions in inches are rounded approximations.
4.5 ± 0.2 3.0 ± 0.2
Chip GDT Pad Layout - Chip GDT Devices

(GTCC23-XXXM-R01) (GTCC23-XXXM-R01)
2.7 ± 0.2
X Y Z1 Z2
X Nom. Nom. Nom. Nom.
mm 3.5 2.7 2.0 2.0
0.5 0.5 in* (0.138) (0.106) (0.079) (0.079)
4.5 ± 0.3 3.2 ± 0.2 Z1 Y Z2 * The dimensions in inches are rounded approximations.
8 Axial Leads No Leads Surface-mount

(GTCA25-XXXM-R02) (GTCN25-XXXM-R02)† (GTCS25-XXXM-R02)
60.0 ± 4.0
(2.364 ± 0.158)
(0.197 ± 0.006)
(0.197 ± 0.008)
5.00 ± 0.15
5.0 ± 0.2
(0.197 ± 0.006)
5.00 ± 0.15
0.5
ø0.8 (0.020)REF
(0.032)REF 5.0 ± 0.2 4.4 ± 0.2 5.0 ± 0.2 5
(0.197 ± 0.008) (0.173 ± 0.008) (0.197 ± 0.008)
5.0 ± 0.2
(0.197 ± 0.008)
Pad Layout - Surface-mount Devices

(GTCS25-XXXM-R02)
X Y Z
X Nom. Nom. Nom.
mm 6.0 3.9 1.3
in* (0.197) (0.154) (0.051)
Z
* The dimensions in inches are rounded approximations.

† Parts with no leads are not solderable and are meant for insertion into magazine clips.

Gas Discharge Tubes
Figure G3-G10 Dimensions for “R” Series Gas Discharge Tubes Cont’d

Axial Leads No Leads Surface-mount
(GTCA26-XXXM-R05) (GTCN26-XXXM-R05)† (GTCS26-XXXM-R05)
62.0 ± 2.0
(0.236 ± 0.008)
(0.236 ± 0.008)
(0.244 ± 0.008)
(2.441 ± 0.079)
ø6.0 ± 0.2
ø6.0 ± 0.2
6.2 ± 0.2
(0.236 ± 0.008)
ø6.0 ± 0.2
0.6
ø0.8 (0.024)REF
4.2 ± 0.2 6.2 ± 0.2 4
(0.032)REF 4.2 ± 0.2
(0.165 ± 0.008) (0.244 ± 0.008)
(0.165 ± 0.008)
4.2 ± 0.2
(0.165 ± 0.008)

(GTCS26-XXXM-R05)
Y
X Y Z
Nom. Nom. Nom.
X mm 7.0 3.7 1.3
in* (0.276) (0.146) (0.051)

Axial Leads No Leads Surface-mount 8

(GTCA28-XXXM-R05, R10 & R20) (GTCN28-XXXM-R05, R10 & R20)† (GTCS28-XXXM-R05, R10 & R20)
62.0 ± 4.0
(2.441 ± 0.157)
(0.315 ± 0.008)
(0.323 ± 0.008)
(0.315 ± 0.008)
ø8.0 ± 0.2
ø8.0 ± 0.2
8.2 ± 0.2
(0.315 ± 0.008)
ø8.0 ± 0.2
ø0.8 0.5 0.5

(0.032)REF 6.0 ± 0.2 (0.02)REF (0.02)REF 8.2 ± 0.2 6
6.0 ± 0.2
(0.236 ± 0.008) (0.236 ± 0.008) (0.323 ± 0.008)
6.0 ± 0.2
(0.236 ± 0.008)

(GTCS28-XXXM-R05, R10 & R20)
Y
X Y Z
Nom. Nom. Nom.
X
mm 9.0 5.6 1.2
in* (0.354) (0.22) (0.047)
Z

3
Figure G7 Three Electrode 5mm Product Dimensions
Axial Leaded Axial Leaded with-FT No Leads

(GTCA35-XXXM-R05) (GTCA35-XXXM-R05-FT) (GTCN35-XXXM-R05)†
+0.0 +0.0
11.4 –2.0 11.4 –2.0
+0.000
( 0.449 –0.079 ) ( +0.000
0.449 –0.079 ) 1
7.6 ± 0.2 8.3 ± 0.3 ø5.0 ± 0.2
(0.299 ± 0.008) (0.327 ± 0.012) (0.197 ± 0.008)
7.6 ± 0.2
(0.299 ± 0.008)
ø5.0 ± 0.2 ø
(0.197 ± 0.008) 7.6 ± 0.2
ø5.0 ± 0.2 ø (0.299 ± 0.008)
(0.197 ± 0.008)
12.0 ± 0.5
(0.473 ± 0.020)
4 4.5 13.0 ± 0.5
(0.177) REF (0.512 ± 0.020)
4.5 4
ø0.8 (0.177) REF
3.8 ± 0.3 (0.032)
(0.151 ± 0.012)
ø0.8
3.8 ± 0.3 (0.032)
(0.151 ± 0.012)
No Leads with-FT Surface-mount T Leaded

(GTCN35-XXXM-R05-FT)† (GTCS35-XXXM-R05) (GTCT35-XXXM-R05)
8.3 ± 0.3 1.6 7.6 ± 0.2
(0.327 ± 0.012) (0.063)REF (0.299 ± 0.008)
ø ø5.0 ± 0.2 ø5.0 ± 0.2

ø5.0 ± 0.2 MAX 5.9 (0.197 ± 0.008)
(0.197 ± 0.008) (0.232) (0.197 ± 0.008)
0.4
(0.016) REF
7 7.6 ± 0.2 ø5.0 ± 0.2 3X 30.0 ± 2.0
7.6 ± 0.2 (0.197 ± 0.008) (1.182 ± 0.079)
(0.299 ± 0.008) (0.299 ± 0.008) ø0.8
(0.032)
8
(GTCS35-XXXM-R05)
Y1 Y2
X Y1 Y2 Z1 Z2
Nom. Nom. Nom. Nom. Nom.
X mm 6.0 3.6 3.6 2.5 1.3 ø
in* (0.236) (0.142) (0.142) (0.098) (0.051)
M
Z1 Z2


Gas Discharge Tubes
Axial Leaded Axial Leaded with-FT No Leads

(GTCA36-XXXM-R05 & R10) (GTCA36-XXXM-R05 & R10-FT) (GTCN36-XXXM-R05 & R10)†
8.0 ± 0.2 8.2 ± 0.3
(0.315 ± 0.008) (0.323 ± 0.012) 0.75
ø 9 ø6.0 ± 0.2 (0.030) REF
(0.236 ± 0.008)
ø6.0 ± 0.2
(0.236 ± 0.008) M
ø6.0 ± 0.2
12.3 ± 0.5 (0.236 ± 0.008)
(0.485 ± 0.020) 13.0 ± 0.5
(0.512 ± 0.020)
8.0 ± 0.2
ø0.8 8
(0.315 ± 0.008) ø0.8 8.0 ± 0.2
(0.032) REF (0.032) REF (0.315 ± 0.008)
4.7 ± 0.5
(0.185 ± 0.020) 4.7 ± 0.5 4
3
(0.185 ± 0.020)
No Leads with-FT Radial Leaded Radial Leaded with-FT

(GTCN36-XXXM-R05 & R10-FT)† (GTCR36-XXXM-R05 & R10) (GTCR36-XXXM-R05 & R10-FT)
9.2 ± 0.2
8.2 ± 0.3 9.2 ± 0.2 (0.362 ± 0.008)
(0.323 ± 0.012) (0.362 ± 0.008) 8.2 ± 0.3
ø6.0 ± 0.2
(0.236 ± 0.008) (0.323 ± 0.012) ø6.0 ± 0.2
(0.236 ± 0.008)
ø6.0 ± 0.2
MAX 7.0 (0.236 ± 0.008) MAX 7.0
(0.276) 14.0 ± 0.5 (0.276)
ø
(0.552 ± 0.020)
8.0 ± 0.2
8 ø0.8
(0.315 ± 0.008)
ø (0.032) REF 8.0 ± 0.5 ø0.8
(0.315 ± 0.020) (0.032) REF
4 3.8 ± 0.3
(0.150 ± 0.012) 3.8 ± 0.3
(0.150 ± 0.012)
8
Surface-mount Pad Layout - Surface-mount Devices
(GTCS36-XXXM-R05 & R10) (GTCS36-XXXM-R05 & R10)
1.2 Y1 Y2
(0.047) REF ø6.0 ± 0.2
(0.236 ± 0.008) 6
X Y1 Y2 Z1 Z2
6.0 ± 0.2 Nom. Nom. Nom. Nom. Nom.
X
(0.236 ± 0.008)
mm 7.0 3.6 3.6 2.5 2.0
1.0 in* (0.276) (0.142) (0.142) (0.098) (0.079)
(0.039) REF
6.0 ± 0.2
8.2 ± 0.2 (0.236 ± 0.008) Z1 Z2
(0.323 ± 0.008)


No Leads Radial Leaded Radial Leaded with-FS
(GTCN37-XXXM-R10)† (GTCR37-XXXM-R10) (GTCR37-XXXM-R10-FS2)
11.5 ± 0.5 11.5 ± 0.5 ø7.5 ± 0.2
11.5 ± 0.5 (0.453 ± 0.020) (0.453 ± 0.020) (0.296 ± 0.008)
(0.453 ± 0.020)
ø7.5 ± 0.2 ø
ø7.5 ± 0.2 (0.296 ± 0.008)
(0.296 ± 0.008)
1.5 ø1.0 ø 7.0 ± 0.5 7 ø1.0 7 7.0 ± 0.5

2.0 (0.059) (0.039) REF (0.276 ± 0.020) (0.039) REF (0.276 ± 0.020)
(0.079)
4.4 ± 0.3 4 4 4.4 ± 0.3

(0.173 ± 0.012) (0.173 ± 0.012)

M

Axial Leaded Axial Leaded with-FS Axial Leaded
1 with-FS
(GTCA38-XXXM-R10) (GTCA38-XXXM-R10-FS) (GTCA38-XXXM-R10-FS2)
+0.0 +0.0 +0.0
13.4 –2.0 13.4 –2.0 13.4 –2.0
ø8.0 ± 0.2 ø8.0 ± 0.2
(0.528 +0.000
–0.079) ( +0.000
0.528 –0.079 ) (0.315 ± 0.008) ( +0.000
0.528 –0.079 ) ø
(0.315 ± 0.008)
8.0 ± 0.2 8
(0.315 ± 0.008) MAX 13.5 MAX 10.8
(0.489) 18.0 ± 0.5 (0.425)
15.0 ± 0.5 15.5 ± 0.5
+1.5 (0.591 ± 0.020) (0.709 ± 0.020) (0.610 ± 0.020)
4.5 –0
+1.5
+0.059 +1.5 4.5 –0
(0.177 –0.000 ) 4.5 –0
+0.059
ø1.0 ( +0.059
0.177 –0.000) (0.177 –0.000 )
(0.039) REF 4.4 ± 0.3 ø1.0
(0.173 ± 0.012) ø1.0 (0.039) REF 4.4 ± 0.3
(0.039) REF 4.4 ± 0.3 (0.173 ± 0.012)
(0.173 ± 0.012)
Axial Leaded with-FT No Leads No Leads with-FT

(GTCA38-XXXM-R10-FT) (GTCN38-XXXM-R10)† (GTCN38-XXXM-R10-FT)†
+0.0
13.4 –2.0 10.3 ± 0.3 3.0
10.3 ± 0.3
(0.118)
(0.528 +0.000
–0.079)
(0.394 ± 0.012) (0.406 ± 0.012)
10.3 ± 0.3 ø8.0 ± 0.2

(0.406 ± 0.012) (0.315 ± 0.008) MAX 9.2
ø7.2 ± 0.2 8.0 ± 0.2 (0.362)
(0.284 ± 0.008) (0.315 ± 0.008)
8
ø0.5 10.0 ± 0.3 8.0 ± 0.2
(0.020) ø1.5 (0.394 ± 0.012) (0.315 ± 0.008)
+0 (0.059)
15.5 –1.5
+1.5 +0.000
4.5 –0 1 (0.611 –0.059)
+0.059
(
0.177 –0.000 )
ø1.0
(0.039) REF 4.4 ± 0.3
(0.173 ± 0.012)
Radial Leaded Radial Leaded with-FS Radial Leaded with-FS

8 (GTCR38-XXXM-R10) (GTCR38-XXXM-R10-FS) (GTCR38-XXXM-R10-FS2)
10.0 ± 0.3 ø7.5 ± 0.2
10.0 ± 0.3 10.0 ±10.3
(0.3941± 0.012) (0.296 ± 0.008) ø7.5 ± 0.2
(0.394 ± 0.012) (0.394 ± 0.012) (0.296 ± 0.008)
ø7.5 ± 0.2 ø
(0.296 ± 0.008)
X
7 MAX 17.5
7.0 ± 0.5 7.0 ± 0.5 (0.689) 7.0 ± 0.5
(0.276 ± 0.020) (0.276 ± 0.020) (0.276 ± 0.020)
ø1.0 ø1.0 ø1.0

(0.039) REF 4.4 ± 0.3 (0.039) REF 4.4 ± 0.3 (0.039) REF 4.4 ± 0.3
(0.173 ± 0.012) (0.173 ± 0.012) (0.173 ± 0.012)
Radial Leaded with-FT Surface-mount

(GTCR38-XXXM-R10-FT) (GTCS38-XXXM-R10)
10.0 ± 0.3 ø7.5 ± 0.2 10.0 ± 0.3

(0.394 ± 0.012) (0.296 ± 0.008) (0.394 ± 0.012) ø8.0 ± 0.2
(0.315 ± 0.008)
8.0 ± 0.2
(0.315 ± 0.008)
MAX 16.0
(0.630)
7.0 ± 0.5 0.5
(0.276 ± 0.020) (0.020) 1.5
(0.059)
ø1.0
(0.039) REF 4.4 ± 0.3
(0.173 ± 0.012)

(GTCS38-XXXM-R10)
Y1 Y2
X Y1 Y2 Z1 Z2
Nom. Nom. Nom. Nom. Nom.
X mm 9.0 4.65 4.65 2.5 1.5
in* (0.354) (0.183) (0.183) (0.098) (0.059)
Z1 Z2


Gas Discharge Tubes
Fail-Short Mechanism for Gas Discharge Tubes
Fail-Short Mechanism (FS)

The FS fail-short mechanism is a short circuit spring mounted onto a solder pellet Short Circuit Spring Solder Pellet
located at the center electrode of the gas tube. Under normal operating conditions,
the pellet is positioned to make the spring float above the outer electrodes, as shown
in Figure G11.
When a prolonged discharge event causes the gas tube temperature to reach the Outer Electrode Ceramic Tube
melting point of the solder, the pellet softens allowing the short circuit spring to contact
with both outer electrodes. This process results in a permanent short-circuit between
all three electrodes creating a low resistance path that conducts the fault current to
Center Electrode
ground without generating a significant amount of heat.
Figure G11
Fail-Short Mechanism (FT)

The FT fail-short mechanism is a short circuit spring with a piece of plastic foil spot
Short Circuit Spring
Plastic Foil
welded onto the center electrode. Under normal operating conditions, the plastic foil
makes the spring insulated from the two outer electrodes.
When a prolonged discharge event causes the gas tube temperature to reach the
melting point of the plastic foil, the plastic foil melts allowing the short circuit spring Outer Electrode Ceramic Tube
to contact both outer electrodes. This process results in a permanent short-circuit

between all three electrodes creating a low resistance path that conducts the fault
current to ground without generating a significant amount of heat. Center Electrode
Figure G12
Operation and Storage Temperatures for Gas Discharge Tubes

Operation Temperature Range
Models without Fail-Short Mechanism : -40°C/+90°C
Storage Temperature Range
Models without Fail-Short Mechanism : -40°C/+90°C
8
Models with Fail-Short Mechanism : -20°C/+65°C Models with Fail-Short Mechanism : -20°C/+65°C
Packaging Information for “R” Series Gas Discharge Tubes

Parts in Bulk Parts in Tape and Reel
Min Order Box Tape & Reel Box
Part Description Quantity Quantity Min Order Quantity Quantity
3mm 2Pole Surface-mount - - 2000 16000
5mm 2Pole No leads 5000 20000 - -
5mm 2Pole, Leads 1000 5000 - -
5mm 2Pole Surface-mount 5000 20000 1500 12000
6mm 2Pole No leads 2000 10000 - -
6mm 2Pole, Leads 1000 5000 - -
8mm 2pole No leads 2000 10000 - -
8mm 2Pole, Leads 1000 5000 - -
5mm 3Pole No leads 2500 10000 - -
5mm 3Pole, Leads 1000 5000 - -
6mm 3Pole No leads 2500 10000 - -
6mm 3Pole, Leads 1000 5000 - -
7mm 3Pole, Leads 1000 5000 - -
8mm 3Pole No leads 1000 10000 - -
8mm 3Pole, Leads 1000 5000 - -

Installation for Gas Discharge Tubes
Care should be taken when installing Gas Discharge Tubes equipped with Fail-Short Mechanisms into arrester magazines, printed circuit
boards, etc. Too much downward pressure may force the short circuit spring through the thin insulation tube creating a shorted condition.
Solder Reflow Recommendations for Surface-mount GDT Devices

Surface-mount GDTs can be soldered using standard Pb-free reflow profile.
Part Numbering System for “R” Series Gas Discharge Tubes
Two Electrode GDT - Example Part Number for R Series Devices
GT C S 2 3 - 231 M - R 01 - 2
Packaging
2 = Tape & reel
Nothing = Tray packaging
Surge Rating
01 = 8x20µs 1kA, 10 hits
02 = 8x20µs 2.5kA, 10 hits
05 = 8x20µs 5kA, 10 hits
10 = 8x20µs 10kA, 10 hits
20 = 8x20µs 20kA, 10 hits
Product Family Designator

R = R series
8 Tolerance of 20% on DC Switch Voltage
DC Switch Voltage of 230V (at 100V/s)
Diameter
3 = 3mm
5 = 5mm
6 = 6mm
8 = 8mm
2 Electrode Device
Lead Configuration
A = Axial Leads
C = Chip Type
N = No leads
(Parts with no leads are not solderable and are meant for insertion into magazine clips.)
S = Surface-mount
Ceramic
Gas Tube
NOTE: GTCS23-XXXM-R01 and GTCC23-XXXM-R01 parts available only in surface-mount and tape and reel packaging

Gas Discharge Tubes
Part Numbering System for “R” Series Gas Discharge Tubes Cont’d
Three Electrode GDT - Example Part Number for R Series Devices
GT C R 3 8 - 231 M - R 10 - FS - 2
Packaging
2 = Tape & reel
Nothing = Tray packaging
FS = solder pellet fail short mechanism on top

FS2 = solder pellet fail short mechanism on bottom
FT = plastic fail short mechanism on top
Surge Rating
05 = 8x20µs 5kA, 10 hits
10 = 8x20µs 10kA, 10 hits

R = R series
Tolerance of 20% on DC Switch Voltage
DC Switch Voltage of 230V (at 100V/s)
Diameter
5 = 5mm
6 = 6mm
7 = 7mm
8 = 8mm
3 Electrode Device
Lead Configuration
A = Axial Leads
N = No leads
(Parts with no leads are not solderable and are meant for insertion into magazine clips.)
R = Radial Leads
S = Surface-mount
T = T-shape Leads
Ceramic
8
Gas Tube
Marking Reference Guide - Example
35 R 05 GN
Year and Week of Manufacture

G = First half of 2004
N = Week 14
Per manufacturer’s lot number system
8x20µs 10 hits Surge Current (05=5kA)

R = R series
Voltage Designator (35 = 350V)
Manufacturer’s mark
NOTES: GTCS23-XXXM-R01 and GTCC23-XXXM-R01 parts will have no marking.

Devices with no leads (GTCNxx-xxxx-xx) are not able to be soldered as their electrodes are Nickel plated.
They should be installed by insertion into a magazine clip.
Warning :
• Users should independently evaluate the suitability of and test each product selected for their own application.
• Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame.
• The devices are intended for protection against damage caused by occasional overvoltage fault conditions and should not be used when
repeated fault conditions or prolonged trip events are anticipated.
• Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, and
mechanical procedures for electronic components.

8
62
Surface-mount Fuses – Fundamentals
Surface-mount Fuses
Fundamentals
Overview
Tyco Electronics offers the widest selection of surface-mount

fuses available for addressing a broad range of overcurrent
protection applications. Helping to prevent costly damage and
promote a safe environment for electronic and electrical
equipment, our single-use chip fuses provide performance
stability to support applications with current ratings from .5A up
to 20A.
Tyco Electronics also offers the telecom FT600 fuse for

telecommunications applications. This telecom fuse helps comply
with North American overcurrent protection requirements,
including Telcordia, GR-1089, TIA-968-A (formerly FCC Part 68),
and UL60950 3rd edition.
Multi-layer Design Enhanced Arc Suppression Characteristics
The multi-layer design has the benefit of exposing more fuse Figure 1
element surface area to the glass-ceramic absorption material.
When the fuse elements open, there is more material for the Glass/Ceramic Multiple Fuse Substrate Single Fuse Glass
Substrate Elements Material Element Coating
vaporizing fuse metals to absorb into, resulting in a very efficient
and effective quenching of the fuse arc.
Figure 1 compared the multi-layer design of our SFF fuses with

standard glass coated designs. The glass coated designs rely on
the coating on only one side of the fuse element to absorb the Multi-layer Design Single-layer Glass Coated Design
vaporizing fuse material when it opens. Therefore, there is much

less absorption material available to absorb the fuse metals. The
9
Figure 2
result can be prolonged arcing and possible coating breach.
Fault Zones
Figure 2 shows how the absorption characteristics of the two

designs differ. The multi-layer design indicates a clean separation
with the fuse element evenly diffusing into the surrounding
ceramic substrate. In the glass coated design, the element
diffusion takes place in a small portion of the device and is only
absorbed by the glass material directly above the area of failure.
Multi-layer Design Single-layer Glass Coated Design
Temperature Derating
A fuse is a temperature sensitive device. Therefore, operating Figure 3

temperature will have an effect on fuse performance and lifetime. Themal Derating Curve
110
Operating temperature should be taken into consideration when
% of Carrying Current Capacity
100
selecting the fuse current rating. The Thermal Derating Curve for 90
80
Raychem surface mount chip fuses is presented in Figure 3. Use 88%
70
it to determine the derating percentage based on operating 60
temperature and apply it to the derated system current. 50

40
30
20
10
0
-55 -45 -35 -25 -15 -5 5 15 25 35 45 55 65 70 85 95 105 115 125
Maximum Operating Temperature (°C)
63
Pulse Cycle Derating
Once the I2t value for the application waveform has been Figure 4
Surface-mount Chip Fuse
determined, it must be derated based on the number of cycles Pulse Derating Curve
expected over the system lifetime. Since the stress induced by the 100%
current pulse is mechanical in nature, the number of times the
% of Minimum I2t
stress is applied has significant bearing on how much derating
must be applied to the fuse rating. Figure 4 presents the current
pulse derating curve for our surface-mount chip fuses up to
100,000 cycles.
10%
100 1000 10000 100000
Number of Pulses
Selecting Surface-mount Chip Fuses
Fuse selection seems straightforward, in that, you pick one which has a current rating just a bit higher than your worstcase system
operating current. Unfortunately, it’s not that simple. There are derating considerations for operating current and application
temperature. Turn-on and other system operations (like processor speed changes or motor start up) cause current surges or
spikes that also require consideration when selecting a fuse. So selecting the right fuse for your application is not as simple as
knowing the nominal current drawn by the system.
Fuse Selection Flowchart
However, the basic considerations for fuse selection are shown in the flowchart presented in Figure 5. Following this flow chart
will help you select a fuse best suited for your application conditions.
Figure 5
Apply Standard Apply

9 Ste p 1–
Determine Steady State
Steady State Temperature Steady State
Fuse Current
Derating (75%) Derating
Fuse Current Rating Rating
[Ifuse ≥ Isys/0.75] [Ifuse ≥ Isys/0.75/Ktemp]
Ste p 2– Ste p 3– Ste p 4– Ste p 5– Ste p 6–

Determine Pulse Apply Pulse Apply Pulse Apply Derating Select Fuse
Waveform by Cycle Derating Temperature for Variance in Current Rating for
Calculating I2t Derating the Circuit Pulse Environment
Ste p 7– Select Fuse Current Rating

(use higher value between Step 1 and Step 6)
Ste p 8– Check Voltage Rating
64
Surface-mount Fuses – Fast-Acting Chip Fuses
Surface-mount Fuses
Fast-Acting Chip Fuses
Fast-acting chip fuses help provide overcurrent protection

on systems using DC power sources up to 63VDC. The
fuse’s monolithic, multilayer design provides the highest
hold current in the smallest footprint, reduces diffusion-
related aging, improves product reliability and resilience,
and enhances high-temperature performance in a wide
range of circuit designs.
These RoHS-compliant surface-mount devices offer

strong arc suppression characteristics and facilitate the
development of more reliable, high performance
consumer electronics such as laptops, multimedia
devices, cell phones, and other portable electronics.
Benefits Features
• Small size with high-current ratings • Lead free materials and RoHS compliant
• Excellent temperature stability • Halogen free
• High reliability and resilience (refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm) 9
• Strong arc suppression characteristics • Monolithic, multilayer design
• High-temperature performance
• -55°C to +125°C operating temperature range
Applications
• Laptops • Printers • Game systems
• Digital cameras • DVD players • LCD monitors
• Cell phones • Portable electronics • Scanners
65
Table FF1 Clear Time Characteristics for Fast-Acting Chip Fuses
% of rated current Clear time at 25°C

100% 4 hours min.
250% 5 seconds max.
400% 0.05 seconds max.
Typical Electrical Characteristics, Dimensions and Recommended Pad Layout for

Table FF2
Fast-Acting Chip Fuses
0402 (1005mm) Fast-Acting Chip Fuses

Typical Electrical Max.
Shape and 0.020±0.004 0.039±0.004
Dimensions (0.51±0.10) (1.00±0.10)
Characteristics Interrupt Ratings
Inch (mm) Rated Nominal Nominal
Current Cold DCR I2t Voltage Current
0.020±0.004
(0.51±0.10) Part Number (A) (Ω)* (A2sec)† (VDC) (A)
0.010±0.004
0402SFF050F/24 0.50 0.380 0.0043 24 35
(0.25±0.10)
0402SFF075F/24 0.75 0.210 0.0076 24 35
Recommended 0.063 0402SFF100F/24 1.00 0.120 0.0170 24 35

(1.60)
Pad Layout 0402SFF150F/24 1.50 0.056 0.0490 24 35
Inch (mm) 0.016
(0.40) 0
0402SFF200F/24 2.00 0.035 0.0700 24 35
0.028 0402SFF300F/24 3.00 0.021 0.1250 24 35
(0.70)
0402SFF400F/24 4.00 0.014 0.2250 24 35
0.024
(0.60)

Shape and 0.031±0.006
(0.80±0.15) 0.063±0.006
Dimensions (1.60±0.15) Rated Nominal Nominal
Inch (mm) Current Cold DCR I2t Voltage Current
Part Number (A) (Ω)* (A2sec)† (VDC) (A)
0.031±0.006 0603SFF050F/32 0.50 0.485 0.0029 32 50
(0.80±0.15)
0603SFF075F/32 0.75 0.254 0.0064 32 50
0.014±0.006 0603SFF100F/32 1.00 0.131 0.0160 32 50
(0.36±0.15)
0603SFF150F/32 1.50 0.059 0.0300 32 35
9 Recommended
Pad Layout
0.110
(2.80)
0603SFF200F/32 2.00 0.044 0.0600 32 35
Inch (mm) 0.024
0 0603SFF250F/32 2.50 0.032 0.1150 32 35
(0.60)
0603SFF300F/32 3.00 0.025 0.1900 32 35
0.039
(1.00) 0603SFF350F/32 3.50 0.024 0.2950 32 35
0.043 0603SFF400F/32 4.00 0.018 0.4000 32 35

(1.09)
0603SFF500F/32 5.00 0.013 0.7000 32 35
0603SFF600F/24 6.00 0.010 1.1250 24 35

0 Characteristics Interrupt Ratings
Shape and 0.063±0.008
Dimensions (1.60±0.20) Rated Nominal Nominal
S 0.126±0.008
Inch (mm) (3.20±0.20) Current Cold DCR I2t Voltage Current
1206SFF050F/63 0.50 0.730 0.0021 63 50
1206SFF075F/63 0.75 0.513 0.0052 63 50
0.043±0.008
(1.10±0.20) 1206SFF100F/63 1.00 0.220 0.0120 63 50
1206SFF150F/63 1.50 0.120 0.0250 63 50
1206SFF175F/63 1.75 0.100 0.0450 63 50
0.020±0.010
(0.51±0.25) 1206SFF200F/63 2.00 0.050 0.0700 63 50
0 1206SFF250F/32 2.50 0.035 0.1400 32 50
Recommended 0.173
Pad Layout (4.40) 1206SFF300F/32 3.00 0.031 0.2200 32 50
Inch (mm) 0.059
(1.50) 1206SFF400F/32 4.00 0.022 0.3800 32 45
0.071
1206SFF500F/32 5.00 0.015 0.6000 32 45
(1.80)
1206SFF600F/24 6.00 0.013 1.0000 24 45
0.057 1206SFF700F/24 7.00 0.011 1.7500 24 45
(1.45)
1206SFF800F/24 8.00 0.008 2.5000 24 45
* Measured at ⱕ10% of rated current and 25°C ambient temperature.
† Melting I2t at 0.001 sec clear time.
Surface-mount Fuses – Fast-Acting Chip Fuses
Figure FF1-FF6 Family Performance Curves for Fast-Acting Chip Fuses
Figure FF1 Figure FF2
0402SFF Average Time Current Curves

0402SFF I²t vs. t Curves
1.0 A
A
4.0 A
A
A
A
1.5A
5
0.5
3.0
2. 0
0.7
10 1000
4.0A
3.0A
100 2.0A
1.5A
1 1.0A
0.75A
0.5A
10
Clear-Time (s)
I²t (A²s)
0.1 1
0.1
0.01
0.01
0.001 0.001
0.1 1 10 100 0.001 0.01 0.1 1 10
Current (A) Time (s)

Note: Curves are nominal

1.0 A

4. A
A
A
3.5A
5.00A
6 .0A
3.0A
2. 5 A
2 . 0A
A
5
9
0.5
0.7
1.5
10 10000
1000 6.0A
5.0A
4.0A
3.5A
3.0A
1 2.5A
100 2.0A
1.5A
1.0A
0.75A
Clear-Time (s)
10 0.5A
I²t (A²s)
0.1
0.1
0.01
0.01
0.001 0.001
0.1 1 10 100 0.001 0.01 0.1 1 10


Figure FF1-FF6 Family Performance Curves for Fast-Acting Chip Fuses Cont’d

1.0 A
2.05 A
A
A
7.0 A
4. A
5.00A
6 .0A
3.0A
2. 5 A
1.7 A
A
8 .0A
5
0.5
0.7
1.5
10 10000
8.0A
7.0A
6.0A
1000 5.0A
4.0A
3.0A
2.5A
1 2.0A
100 1.75A
1.5A
1.0A
0.75A
Clear-Time (s)
10 0.5A
I²t (A²s)
0.1
0.1
0.01
0.01
0.001 0.001
0.1 1 10 100 0.001 0.01 0.1 1 10
Please go to page 75 for more information for Fast-Acting Chip Fuses.

Surface-mount Fuses – High-Current-Rated Chip Fuses
Surface-mount Fuses
High-Current-Rated Chip Fuses
The monolithic multilayer design of the Tyco Electronics
high-current-rated chip fuses helps to provide some of
the highest current ratings available in the 1206 size and
enhances high-temperature performance in a wide
range of circuit protection designs. The devices’ small
size, high reliability and strong arc suppression
characteristics make them suitable for overcurrent
protection of power supplies, servers, communications
equipment, voltage regulator modules, and other high-
current, small size applications.
Benefits Features
• Glass ceramic monolithic structure provides stability • Lead free materials and RoHS compliant
in application cycling • Halogen free
• High-current rating in a small package allows more
efficient use in system space
(refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm)
9
• Monolithic multilayer design
• Strong arc suppression in overcurrent conditions • High-temperature performance
Applications
• Communications equipment
• Voltage regulator modules
• Power supplies
• Servers
69
Table FH1 Clear Time Characteristics for High-Current-Rated Chip Fuses
1206SFH Series
% of rated current Clear time at 25°C
100% 4 hours (min.)
250% 5 seconds (max.)

Table FH2
High-Current-Rated Chip Fuses
1206 (3216mm) High-Current-Rated Chip Fuses
Shape and Typical Electrical Max.

0.063±0.008
Dimensions (1.6 0±0.20) Characteristics Interrupt Ratings
0.126±0.008
Inch (mm) (3.20±0.20) Rated Nominal Nominal
Current Cold DCR I2t Voltage Current
1206SFH100F/24 10 0.010 9 24 100
0.038±0.008 1206SFH120F/24 12 0.008 14 24 100
(0.97±0.20)
1206SFH150F/24 15 0.005 26 24 100
1206SFH200F/24 20 0.003 56 24 100
0.020±0.010 * Measured at ⱕ10% of rated current and 25°C ambient temperature.
(0.51±0.25)
Recommended 0.173
Pad Layout (4.40)
Inch (mm) 0.059
(1.5 0)
0.071
(1.8 0)
0.057
(1.4 5)
Figure FH1-FH2 Family Performance Curves for High-Current-Rated Chip Fuses
Figure FH1 Figure FH2

9 1206SFH Average Time Current Curves
1206SFH I²t vs. t Curves
A
A
A
A
20
10
15
12
10 10000
20A
15A
12A
10A
1 1000
Clear Time (s)
I²t (A²s)
0.1 100
0.01 10
0.001 1
10 100 1000 0.001 0.01 0.1 1 10
Current (A) Note: Curves are nominal Time (s)
Please go to page 75 for more information for High-Current-Rated Chip Fuses.

Surface-mount Fuses – Slow-Blow Chip Fuses
Surface-mount Fuses
Slow-Blow Chip Fuses
Available in industry standard 1206 and 0603 chip sizes,
Tyco Electronics’ slow-blow chip fuses help provide
overcurrent protection on systems that experience large
and frequent current surges as part of their normal
operation.
The slow-blow chip fuse’s monolithic, multilayer design

helps provide some of the highest current ratings
available in the 1206 and 0603 footprints and enhances
high-temperature performance in a wide range of circuit
protection designs. The devices’ small size, high
reliability and strong arc suppression characteristics
make them suitable for overcurrent protection of power
supplies, capacitor filter banks, LCD (Liquid Crystal
Display) backlight inverters, electric motors and
portable electronics.
Benefits Features
• Time-delayed design prevents nuisance openings • Lead free materials and RoHS compliant
in pulsed and high inrush current applications • Halogen free
• Small size with high-current ratings (refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm)
9
• Strong arc suppression characteristics • Monolithic multilayer design
• High-temperature performance
Applications
• Small motors systems • Power over Ethernet (POE) • Computer drives
• Portable electronics • Test equipment • Displays
• Input power ports • POL converter protection • Printers
71
0
Table FS1 Clear Time Characteristics for Slow-Blow Chip Fuses
0603SFS Series 1206SFS Series

% of rated current Clear time at 25°C % of rated current Clear time at 25°C
100% 4 hours (min.) 100% 4 hours (min.)
200% 1 second (min.) 120 seconds (max.) 200% 1 second (min.) 120 seconds (max.)
300% 0.1 second (min.) 3 seconds (max.) 300% 0.1 second (min.) 3 seconds (max.)
800%(1.0A-1.5A) 0.0005 second
0
(min.) 0.05 seconds (max.) 800%(1.0A-1.5A) 0.0016 second (min.) 0.05 seconds (max.)
800%(2.0A-5.0A) 0.001 second (min.) 0.05 seconds (max.) 800%(2.0A-8.0A) 0.002 second (min.) 0.05 seconds (max.)

Table FS2
0603 (1608mm) Slow-Blow Chip Fuses

Shape and 0.031±0.006 Characteristics Interrupt Ratings
(0.80±0.15) 0.063±0.006
Dimensions (1.6 0±0.15) Rated Nominal Nominal
Inch (mm) Current Cold DCR I2t Voltage Current
0.031±0.006
(0.80±0.15) 0603SFS100F/32 1.0 0.200 0.093 32 50
0603SFS150F/32 1.5 0.100 0.18 32 50
0.014±0.006 0603SFS200F/32 2.0 0.052 0.32 32 50
(0.36±0.15)
0603SFS250F/32 2.5 0.041 0.63 32 50
Recommended 0.110
Pad Layout (2.80) 0603SFS300F/32 3.0 0.031 0.87 32 50
Inch (mm) 0.024
(0.60) 0603SFS350F/32 3.5 0.021 1.20 32 50
0603SFS400F/32 4.0 0.017 2.30 32 50
0.039
(1.00) 0603SFS450F/32 4.5 0.015 2.70 32 50
0.043 0603SFS500F/32 5.0 0.013 3.20 32 50
(1.0 9)
1206 (3216mm) Slow-Blow Chip Fuses

9 Typical Electrical Max.
Shape and 0.063±0.008
Dimensions (1.6 0±0.20) Rated Nominal Nominal
0.126±0.008
Inch (mm) (3.20±0.20) Current Cold DCR I2t Voltage Current
1206SFS100F/63 1.0 0.360 0.11 63 50
1206SFS125F/63 1.25 0.200 0.22 63 50
0.038±0.008
(0.97±0.20) 1206SFS150F/63 1.5 0.150 0.23 63 50
1206SFS200F/63 2.0 0.082 0.63 63 50
1206SFS250F/32 2.5 0.070 0.90 32 50
0.020±0.010
(0.51±0.25) 1206SFS300F/32 3.0 0.032 1.20 32 50
1206SFS350F/32 3.5 0.028 1.60 32 50
Recommended 0.173
Pad Layout (4.40) 1206SFS400F/32 4.0 0.024 2.20 32 50
Inch (mm) 0.059 1206SFS450F/32 4.5 0.020 3.60 32 50
(1.5 0)
1206SFS500F/32 5.0 0.016 5.30 32 50
0.071
(1.8 0) 1206SFS550F/24 5.5 0.014 6.40 24 50
0.057 1206SFS600F/24 6.0 0.011 8.50 24 60
(1.4 5)
1206SFS700F/24 7.0 0.010 10.00 24 60
1206SFS800F/24 8.0 0.009 16.90 24 60
* Measured at ⱕ10% of rated current and 25°C ambient temperature.

Surface-mount Fuses – Slow-Blow Chip Fuses
Figure FS1-FS4 Family Performance Curves for Slow-Blow Chip Fuses
Figure FS1
0603SFS Average Time Current Curves
A
A
A
3.0A
A
A
A
3.5
4.5
4.0
5.0
2. 5
2. 0
1.5
1.0
100
10
1
Clear Time (s)
0.1
0.01
0.001
1 10 100
Current (A)
Figure FS2
0603SFS I²t vs. t Curves

10,000
5.0A
4.5A
4.0A
3.5A
3.0A
9
2.5A
1000 2.0A
1.5A
1.0A
100
I2t (A2s)
10
0.1
0.01
0.001 0.01 0.1 1 10 100
Time (s)

Figure FS1-FS4 Family Performance Curves for Slow-Blow Chip Fuses Cont’d
Figure FS3
1206SFS Average Time Current Curves
5A
4.0 A
5.0 A
6 .0 A
A
7.0 A
3.5A
5.5A
4.5A
A
A
A
A
A
8 .0
3.0
2. 5
2. 0
1. 2
1.5
1.0
100
10
1
Clear Time (s)
0.1
0.01
0.001
1 10 100 1000
Current (A)
Figure FS4
1206SFS I²t vs. t Curves
100000
9 8.0A
7.0A
6.0A
5.5A
10000 5.0A
4.5A
4.0A
3.5A
3.0A
2.5A
1000 2.0A
1.5A
1.25A
1.0A
100
I2t (A2s)
10
0.1
0.01
0.001 0.01 0.1 1 10 100
Time (s)
Please go to page 75 for more information for Slow-Blow Chip Fuses.

Surface-mount Fuses - Specifications for All Chip Fuses
Specifications, Packaging Information, Agency Approvals and
Part Numbering Systems for All Chip Fuses
Table F1 Environmental Specifications for Fast-Acting, High-Current-Rated and Slow-Blow Chip Fuses
Operating temperature -55°C to +125°C

Mechanical vibration Withstands 5-3000 Hz at 30 Gs when evaluated per Method 204 of MIL-STD-202
Mechanical shock Withstands 1500 Gs, 0.5 millisecond half-sine pulses when evaluated per Method 213 of MIL-STD-202
Thermal shock Withstands 100 cycles from -65°C to +125°C when evaluated per Method 107 of MIL-STD-202
Resistance to soldering heat Withstands 60 seconds at +260°C when evaluated per Method 210 of MIL-STD-202
Solderability Meets 95% minimum coverage requirement when evaluated per Method 208 of MIL-STD-202
Moisture resistance Withstands 10 cycles when evaluated per Method 106 of MIL-STD-202
Salt spray Withstands 48-hour exposure when evaluated per Method 101 of MIL-STD-202
Table F2 Material Specifications for Fast-Acting, High-Current-Rated and Slow-Blow Chip Fuses
Construction body material Ceramic

Termination material Silver, Nickel, Tin
Fuse element Silver
Figure F1 Thermal Derating Current for Fast-Acting, High-Current-Rated and Slow-Blow Chip Fuses
Temperature Effect on Current Rating

105
100
95
90
85
80
75
9
70
65
% De-rating
60
55
50
45
40
35
30
25
20
15
10
5
0
-55 -35 -15 5 25 45 65 85 105 125 145
Maximum Operating Temperature (˚C)
Table F3 Electrical Specifications for Fast-Acting, High-Current-Rated and Slow-Blow Chip Fuses
Insulation resistance after opening 20,000Ω minimum @ rated voltage. Fuse clearing under low voltage conditions may result in lower -
post-clearing insulation values. Under normal fault conditions Raychem fuses provide sufficient
insulation resistance for circuit protection.
Current carrying capacity Withstands 100% rated current at +25°C ambient for 4 hours when evaluated per MIL-PRF-23419.

Table F4 Packaging Information for Fast-Acting, High-Current-Rated and Slow-Blow Chip Fuses
Reel Quantity Carrier Reels per Outside Outside Shipment

Size (pcs) Reel Diameter Reel Width Tape Size Tape Type Shipment Box Boxes per Overpack
0402 (1005) 10,000 178mm white plastic 9.0 ± 0.5mm 8.00 ± 0.10mm Paper 5 5
0603 (1608) 4,000 178mm white plastic 9.0 ± 0.5mm 8.00 ± 0.10mm Plastic 5 5
1206 (3216) 3,000 178mm white plastic 9.0 ± 0.5mm 8.00 ± 0.10mm Plastic 5 5
Recommended Soldering Temperature Profile for Fast-Acting, High-Current-Rated and

Figure F2
Soldering Natural
10s Max. Cooling
260
Temperature (˚C)
230
150-180 40s Max.
Preheat 60 - 120s Min.
Time (s)
Recommended conditions for hand soldering:
1. Using hot air rework station that can reflow the solder on both terminations at the same time is strongly recommended,
do not directly contact the chip termination with the tip of soldering iron.
2. Preheating: 150°C, 60s (min).
Appropriate temperature (max) of soldering iron tip/soldering time (max): 280°C /10s or 350°C / 3s.
Maximum temperature of soldering iron tip/soldering time: 350°C /9s or 400°C / 8s.
Tape and Reel Specifications for Fast-Acting, High-Current-Rated and

Table F5
9 Dimension in inches (mm)
Mark 0402 (1005) 0603 (1608) 1206 (3216)
E1 0.069±0.004 (1.75±0.10) 0.069±0.004 (1.75±0.10) 0.069±0.004 (1.75±0.10)
F 0.138±0.002 (3.50±0.05) 0.138±0.002 (3.50±0.05) 0.138±0.002 (3.50±0.05)
W 0.318±0.004 (8.00±0.10) 0.318±0.004 (8.00±0.10) 0.318±0.004 (8.00±0.10)
P1 0.079±0.004 (2.00±0.10) 0.157±0.004 (4.00±0.10) 0.157±0.004 (4.00±0.10)
P0 0.157±0.004 (4.00±0.10) 0.157±0.004 (4.00±0.10) 0.157±0.004 (4.00±0.10)
P2 0.040±0.002 (1.00±0.05) 0.079±0.002 (2.00±0.05) 0.079±0.002 (2.00±0.05)
D0 0.059±0.004 (1.50+0.10/-0.00) 0.059±0.004 (1.50+0.10/-0.00) 0.059±0.004 (1.50+0.10/-0.00)
D1 - - - - 0.039 max (1.00 max)
t 0.009±0.001 (0.23±0.02) 0.009±0.001 (0.23±0.02) 0.009±0.001 (0.23±0.02)
A0 0.026±0.004 (0.67±0.10) 0.036±0.004 (0.92±0.10) 0.071±0.004 (1.80±0.10)
B0 0.046±0.004 (1.17±0.10) 0.071±0.004 (1.80±0.10) 0.138±0.004 (3.50±0.10)
K0 0.025±0.004 (0.63±0.10) 0.033±0.004 (0.85±0.10) 0.050±0.004 (1.27±0.10)

Surface-mount Fuses - Specifications for All Chip Fuses
Component Tape Dimensions for Fast-Acting, High-Current-Rated and
Figure F3
t D0 P0 P2
E1
F
W
B0
K0 P1
A0
D1
Figure F4 Reel Dimensions for Fast-Acting, High-Current-Rated and Slow-Blow Chip Fuses
Dimension
Description Mark Dimensions (mm) W2
Hub outer diameter B 60

Reel inside width W1 9
B
Reel outside width W2 11.4
Tape width 8
W1
Agency Approvals for Fast-Acting, High-Current-Rated and Slow-Blow Chip Fuses
UL File # E197536
Part Numbering System for Fast-Acting, High-Current-Rated and Slow-Blow Chip Fuses
1206 SF F 400 F / 24 -2
9
Packaging
-2 = Tape and Reel
Voltage Rating (V)
Special Code
F = RoHS Compliant
FM = RoHS Compliant + Marked Part
Rated Current
050 = 0.50 Amps
400 = 4 Amps
Fuse Blow Type

F = Fast Acting
S = Slow Blow
H = High Current
SF = Surface Mount Fuse
Size (1206, 0603, 0402)
Warning :

9
78
Surface-mount Fuses – Telecom Fuses
Surface-mount Fuses
Telecom Fuses
The telecom FT600 fuse helps telecommunications
equipment manufacturers comply with North American
overcurrent protection requirements, including Telcordia
GR-1089, TIA-968-A (formerly FCC Part 68), and
UL60950 3rd edition.
Tyco Electronics’ telecom fuses offer low temperature-

rise performance under sneak current fault events to
help prevent damage to circuit traces or multilayer
boards, and their low profile and small footprint make
them suitable for high-density and space-constrained
applications.
Benefits Features
• High density placement in multi-port system designs • Lead free materials and RoHS compliant
• Improved temperature rise performance over other • Halogen free
similar surface-mount fuse devices under sneak (refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm) 9
current testing • Low profile and small footprint
• The FT600, in conjunction with a thyristor surge • The lightning robust surface-mount fuse offers
suppression device, assists designers to meet overcurrent protection in case of power fault events
regulatory standards without additional series
• Enables the design of equipment complying with
components
applicable telecom specifications including
UL60950, TIA-968-A, and Telcordia GR-1089
• Low resistance
Applications
• ADSL, ADSL2, ADSL2plus, SHDSL, VDSL linecards and modems
• T1/E1 systems
• Twisted-pair telecom ports requiring Telcordia GR-1089, UL60950 and FCC Part TIA-968-A compliance
79
Protection Application Guide for Telecommunications and Networking Devices
To use this guide, follow the steps below:
1. Select your equipment type from the guide below.
2. Use the Key Device Selection Criteria (time-to-open, surface temperature) to determine best suitability for your application.
3. Use Agency Specification / Selection Guide to select a specific part number for each application based on the agency requirements.
Key Device Selection Criteria

Faster Cooler Surface
Application Specification Time-To-Open Temperature
Customer premises equipment, IT equipment UL 60950 FT600-0500 FT600-2000
Analog modems, V.90 modems, TIA-968-A FT600-1250
ISDN modems, xDSL modems,
ADSL splitters, phone sets, fax machines,
answering machines, caller ID, internet
appliances, PBX systems, POS terminals, wall plugs
Access network equipment Telcordia GR-1089 FT600-1250 FT600-2000
Remote terminals, line repeaters, multiplexers, TIA-968-A
cross-connects, WAN equipment
Central office switching equipment Telcordia GR-1089 FT600-1250 FT600-2000
Analog/POTS linecards, ISDN linecards, xDSL modems, TIA-968-A
ADSL/VDSL splitters, T1/E1 linecards,
multiplexers, CSU/DSU, servers
Note : This list is not exhaustive. Tyco Electronics welcomes our customers’ input for additional application ideas for overcurrent protection of telecom applications.
Agency Specification/Selection Guide for FT600 Devices

Use the guide below to select FT600 devices appropriate for use in your application. The following pages contain specifications for part
numbers recommended below. FT600 devices enable telecommunication equipment to meet the applicable protection requirements of
these industry specifications. Refer to individual agency specifications for test procedures and circuit schematics. Users should
independently evaluate the suitability of, and test each product for their application.
Family Product Lightning Power Cross

FT600 FT600-0500 TIA-968-A – Types A & B UL60950, 3rd Ed. – 600VAC, 40A
FT600-1250 Telcordia GR-1089 – Level 1 and 2 Telcordia GR-1089 – 600 VAC, 40A
FT600-2000 TIA-968-A UL60950
9 Notes: FT600-1250 and FT600-2000 assist equipment in complying with Telcordia GR-1089 specifications. In-circuit testing is strongly recommended.
The FT600-0500, FT600-1250 and FT600-2000 help meet the UL60950 Power Cross and FCC TIA-968-A 68 lightning surge requirements. Note that Type A tests allow for an
overcurrent protection component to fuse open during the surge.
Table FT1 Interrupt Voltage and Current Ratings for FT600 Devices
Ampere Rating Voltage Rating Typical Resistance Typical I2t
Part Number (A) (V) (Ω) (A2s)*
FT600-0500 0.50 250 0.50 1
FT600-1250 1.25 250 0.10 16
FT600-2000 2.00 250 0.05 18
Note: The FT600-xxxx devices carry 100% of rated current for 4 hours minimum and 250% of rated current for 1 second minimum, 120 seconds maximum.
Resistance measured at 10% of rated current.
*I2t is calculated at 10 ms or less.
Figure FT1 Thermal Derating Curve (Normalized) for FT600 Devices

130
120
% of Current Rating
110
100
90
80
70
-70 -50 -30 -10 10 30 50 70 90 110 130
Ambient Temperature ˚C

Table FT2 Dimensions for FT600 Devices in Millimeters (Inches)
A B C
Part Number Min. Max. Min. Max. Min. Max. Figure
FT600-0500 — 10.2 — 3.1 — 3.1 FT2
(0.402) (0.122) (0.122)
FT600-1250 — 10.2 — 3.1 — 3.1 FT2
(0.402) (0.122) (0.122)
FT600-2000 — 10.2 — 3.1 — 3.1 FT2
(0.402) (0.122) (0.122)
Figure FT2 Dimension Figures for FT600 Devices
A C
Figure FT3 Typical Time-to-open Characteristics (at 20°C) for FT600 Devices
FT600 Figure FT3

A = FT600-0500
B = FT600-1250 0.500A 1.25A 2A
100
C = FT600-2000
A B C
10
9
1
Time (sec)
0.1
0.01
0.001
0.1 1 10 100 1000
Current in Amperes

Table FT3 Physical Characteristics and Environmental Specifications for FT600 Devices
Terminal material Silver-plated brass*

Body material Ceramic
Termination solderability Per IEC-60127-4
*FT600 devices use high Pb content solder for internal construction. They are RoHS compliant.
Test Conditions
Solder heat withstand Per MIL-STD-202, Method 210, Test Condition J
Solvent resistance Per MIL-STD-202F, Method 215J
Storage temperature ⱕ30°C/ 85% RH
Storage humidity Per MIL-STD-202F, Method 106F
Table FT4 Packaging and Marking Information for FT600 Devices
Bag Tape & Reel Standard Package

Part Number Quantity Quantity Quantity Part Marking Agency Recognition
FT600-0500-2 — 2,500 10,000 500 UL, CSA
FT600-1250-2 — 2,500 10,000 1250 UL, CSA
FT600-2000-2 — 2,500 10,000 2000 UL, CSA
Note: The -2 designates tape and reel, the package style for this product.
Table FT5 Recommended Pad Layouts for FT600 Devices in Millimeters (Inches) Nominal
Figure FT4
Device A B C D Figure for Dimensions
9 FT600-0500 12.6
(0.496)
4.0
(0.157)
3.7
(0.145)
5.2
(0.204)
FT4 D C
FT600-1250 12.6 4.0 3.7 5.2 FT4

B
(0.496) (0.157) (0.145) (0.204)
FT600-2000 12.6 4.0 3.7 5.2 FT4
(0.496) (0.157) (0.145) (0.204) A
Solder Reflow and Rework Recommendations for FT600 Devices
Solder Reflow Figure FT5

• Recommended reflow methods: IR, vapor phase oven, hot air oven Preheating Soldering Cooling
300
• Devices can be cleaned using standard industry methods and solvents
Temperature (˚C)
250
Rework 200
• If a device is removed from the board, it should be discarded and 150
replaced by a new device 100
50
0
30-90 120
10 to 20
Time (s)

Table FT6 Tape and Reel Specifications for FT600 Devices
Dimension
Description EIA Mark Dimension (mm) Tolerance
Carrier tape width W 24 ±0.3
Sprocket hole pitch P0 4 ±0.1
P1 8 ±0.1
P2 2 ±0.1
A0 3.68 ±0.1
B0 10.44 ±0.1
Sprocket hole diameter D0 1.5 +0.1 / -0.0
F 11.5 ±0.1
E1 1.75 ±0.1
Tape thickness T max. 0.3 ±0.05
K0 3.25 +1.0 / -0.05
Reel Dimensions
Reel diameter A max. 331.5
Core diameter N min. 98.5
Space between flanges less devices W0 25 ±0.5
Reel width W1 max. 31
Figure FT6 EIA Referenced Taped Component Dimensions for FT600 Devices
P0 Note 1
A E1
T P2 Note 6
Notes:
D0 1. 10 sprocket hole pitch cumulative tolerance ±0.2
2. Allowable camber to be 1mm/250mm
F Note 6
W 3. Material: Black conductive
4. A0 and B0 measured on a plane 0.3mm above the
9
B0
bottom of the pocket
5. K0 measured from the plane on the inside bottom
of the pocket to the top surface of the carrier
6. Pocket position relative to sprocket hole measured
as true position of pocket, not pocket hole
K0 P1 A0 7. Quantity per reel to be 174m
A
Figure FT7 EIA Referenced Reel Dimensions for FT600 Devices
W1
W0
ø13.2±0.2
(0.52±0.008)
120°
17.2±0.2
A N (0.677±0.008)
2.2±0.2
(0.087±0.008)
Detail A
See “Detail A”

Part Numbering System for FT600 Devices
FT 600 - 1250 -2
Packaging
-2 = Tape and Reel
Current in Amperes
1250 = 1.25
0500 = 0.500
2000 = 2.00
Voltage Rating
Product Family
Warning :

PolySwitch Resettable Devices – Fundamentals
PolySwitch Resettable Devices
Fundamentals
Overview
PolySwitch PPTC (Polymeric Positive Temperature Coefficient) Figure 1

devices help protect against damage caused by harmful How a PolySwitch Device Works
overcurrent surges and overtemperature faults. Like traditional Figure 1.a Figure 1.b
Normal Condition Trip Condition
fuses, these devices limit the flow of dangerously high current
during fault conditions. The PolySwitch device, however, resets Temperature rises during
after the fault is cleared and power to the circuit is removed, short circuit condition
thereby helping to reduce warranty, service and repair costs.
PolySwitch circuit protection devices are made from a composite Temperature drops
after circuit resets
of semi-crystalline polymer and conductive particles. At normal
temperature, the conductive particles form low-resistance
Polymer has a Polymer expands due
networks in the polymer (Figure 1.a). However, if the temperature crystalline structure. to I2R heating.
rises above the device’s switching temperature (Tsw) either from Conductive path is made of Conductive path breaks down
carbon black materials. due to polymer expansion.
high current through the part or from an increase in the ambient
temperature, the crystallites in the polymer melt and become amorphous. The increase in volume during melting of the crystalline
phase separates the conductive particles resulting in a large non-linear increase in the resistance of the device.
Overcurrent Protection using a PPTC Device
The PPTC device is a series element in a circuit. The PPTC device Figure 2
protects the circuit by going from a low-resistance to a high- Typical PTC Application
resistance state in response to an overcurrent condition, as shown RS
I
in Figure 2. This is referred to as “tripping” the device.
In normal operation the device has a resistance that is much lower

than that of the circuit. In response to an overcurrent condition,
the device increases in resistance (trips), reducing the current in
V
the circuit to a value that can be safely carried by any of the RL
circuit elements. This change is the result of a rapid increase in
the temperature of the device, caused by I2R heating.
Principles of operation
PolySwitch device operation is based on an overall energy Figure 3

balance, as shown in Figure 3. Under normal operating conditions,
the heat generated by the device and the heat lost by the device
Example of Operating Curve
for PPTC Device
10
to the environment are in balance at a relatively low temperature,
as shown between Point 1 and 2. Point 4
Resistance Value
If the current through the device is increased while the ambient

temperature is kept constant, the temperature of the device
increases. Further increases in either current, ambient temperature,
Point 2
or both will cause the device to reach a temperature where the Point 1
resistance rapidly increases, as shown in Point 3.

Point 3
Any further increase in current or ambient temperature will cause Temperature (˚C)
the device to generate heat at a rate greater than the rate at which
heat can be dissipated, thus causing the device to heat up rapidly. At this stage, a very large increase in resistance occurs for a
very small change in temperature, between points 3 and 4. This is the normal operating region for a device in the tripped state.
This large change in resistance causes a corresponding decrease in the current flowing to the circuit. This relation holds until the
device resistance reaches the upper knee of the curve (Point 4). As long as the applied voltage remains at this level, the device
will remain in the tripped state (that is, the device will remain latched in its protective state). Once the voltage decreases, the
power is removed, and the device cools, the device will reset.
85
Example of Hold and Trip Current as a Function of Temperature
Figure 4 illustrates the hold- and trip-current behavior of a Figure 4 E I
PolySwitch device as a function of temperature. One such curve Example of Hold and Trip Current as a
can be defined for each available device. Region A describes the Function of Temperature
combinations of current and temperature at which the PolySwitch 300
Region A
device will trip (go into the high-resistance state) and protect the Device will trip
Rated hold current (%)R

and protect circuit
ITRIP
circuit. Region B describes the combinations of current and
200
temperature at which the PolySwitch device will allow for normal - Region C
operation of the circuit. In Region C, it is possible for the device IHOLD

to either trip or remain in the low-resistance state (depending on 100
Region B
individual device resistance). Device will remain in
low-resistance state
0
-40 -20 0 20 40 60 80
Temperature (˚C)
E
Operating Characteristics of a PPTC Device
Figure 5 shows a typical pair of operating curves for a PolySwitch Figure 5

device in still air at 0°C and 75°C. The curves are different because
Example of PPTC Device
the heat required to trip the device comes both from electrical Operating Characteristics
I2R heating and from the device environment. At 75°C the heat
input from the environment is substantially greater than it is at
0°C, so the additional I2R needed to trip the device is
7
Log Time to Trip

correspondingly less, resulting in a lower trip current at a given 0˚C
trip time (or a faster trip at given trip current).
75˚C
L
Current
Typical Resistance Recovery after a Trip Event
Figure 6 shows typical behavior of a PolySwitch device that is Figure 6

tripped and then allowed to cool. This figure illustrates how, even
after a number of hours, the device resistance is still greater than Typical Resistance Recovery after a Trip Event
the initial resistance. Over an extended period of time, device Cut off power supply
resistance will continue to fall and will eventually approach initial
resistance.
Resistance (Ω)
During trip
10 However, since this time can be days, months, or years, it is not

practical to expect that the device resistance will reach the
C
Initial
original value for operation purposes. Therefore, when PolySwitch resistance
before trip
devices are chosen R1MAX should be taken into consideration when
determining hold current. R1MAX is the resistance of the device one 0.01 0.1 1 10 100 1,000 10,000
hour after the thermal event. Before trip

Resetting time for resistance (minute)
I
86
PolySwitch Resettable Devices – Product Selection Guide
Product Selection Guide
Table 1 PolySwitch Device Characteristics
PolySwitch Device VMAX VMAX Interrupt IH

Family Operating (VDC) (VRMS) (A) Temp. Range Form Factor Agency Spec. Application
LVR 120V/240V 135V/265V 0.05 to 2A -20 to 85°C Radial-leaded UL, CSA, TÜV Line Voltage
LVRL 120V 135V 0.75 to 2A -20 to 85°C Radial-leaded UL, CSA, TÜV Line Voltage
RGEF 16V - 2.5 to 14.0A -40 to 85°C Radial-leaded UL, CSA, TÜV General Electronics
RHEF 16 to 30V - 0.5 to 15A -40 to 125°C Radial-leaded UL, CSA, TÜV General Electronics
RTEF 33V - 1.2 to 1.9A -40 to 85°C Radial-leaded UL, CSA, TÜV General Electronics
RUEF 30V - 0.9 to 9.0A -40 to 85°C Radial-leaded UL, CSA, TÜV General Electronics
RKEF 60V - 0.50 to 5A -40 to 85°C Radial-leaded UL, CSA, TÜV General Electronics
RXEF 60 to 72V - 0.05 to 3.75A -40 to 85°C Radial-leaded UL, CSA, TÜV General Electronics
RUSBF 6 to 16V - 0.75 to 2.5A -40 to 85°C Radial-leaded UL, CSA, TÜV Computer/General Electronics
femtoSMDC 9 to 15V - 0.05 to 0.16A -40 to 85°C Surface-mount UL, CSA Computer/General Electronics
microSMD 6 to 30V - 0.05 to 2.0A -40 to 85°C Surface-mount UL, CSA, TÜV Computer/General Electronics
midSMD 6 to 60V - 0.3 to 2.0A -40 to 85°C Surface-mount UL, CSA, TÜV Computer/General Electronics
miniSMDC 6 to 60V - 0.10 to 3A -40 to 85°C Surface-mount UL, CSA, TÜV Computer/General Electronics
miniSMDE 16V - 1.9A -40 to 85°C Surface-mount UL, CSA, TÜV Computer/General Electronics
nanoSMDC 6 to 48V - 0.12 to 2.0A -40 to 85°C Surface-mount UL, CSA, TÜV Computer/General Electronics
picoSMDC 6 to 15V - 0.10 to 1A -40 to 85°C Surface-mount UL, CSA, TÜV Computer/General Electronics
SMD 6 to 60V - 0.3 to 3.0A -40 to 85°C Surface-mount UL, CSA, TÜV Computer/General Electronics
SMD2 15 to 33V - 1.5 to 2.5A -40 to 85°C Surface-mount UL, CSA, TÜV Computer/General Electronics
BD 14V - 8 to 21A -40 to 125˚C Plug-in - Automotive
AGRF 16V - 4.0 to 14.0A -40 to 85°C Radial-leaded - Automotive
AHRF 16 to 30V - 0.50 to 15A -40 to 125°C Radial-leaded - Automotive
AHS 16V - 0.80 to 3.0A -40 to 125°C Surface-mount - Automotive
ASMD 16 to 60V - 0.23 to 1.97A -40 to 85°C Surface-mount - Automotive
AHEF 32V - 0.50 to 10A -40 to 125°C Radial-leaded - Automotive
BBRF 99V - 0.55A -40 to 85°C Radial-leaded UL, CSA Telecom & Networking
TCF 60V 250V 0.10 to 0.18A -40 to 85°C Chip - Telecom & Networking
TRF250 60 to 100V 250V 0.055 to 0.184A -40 to 85°C Radial-leaded UL, CSA, TÜV Telecom & Networking
TRF600 60 to 250V 600V 0.15 to 0.40A -40 to 85°C Radial-leaded UL, CSA, TÜV Telecom & Networking
TS250/TSV250 60V 250V 0.13A -40 to 85°C Surface-mount UL, CSA, TÜV Telecom & Networking
TSL250 80V 250V 0.08A -40 to 85°C Surface-mount UL, CSA, TÜV Telecom & Networking
TS600/TSM600 60 to 250V 600V 0.17 to 0.40A -40 to 85°C Surface-mount UL, CSA, TÜV Telecom & Networking
MXP 6V - 1.9A -40 to 85°C Axial-leaded UL, CSA, TÜV Battery 10
LR4 15 to 20V - 1.9 to 13.0A -40 to 85°C Axial-leaded UL, CSA, TÜV Battery
LTP 15 to 24V - 0.7 to 3.4A -40 to 85°C Axial-leaded UL, CSA, TÜV Battery
SRP 15 to 30V - 1.2 to 4.2A -40 to 85°C Axial-leaded UL, CSA, TÜV Battery
VLP 16V - 2.1 to 2.7A -40 to 85°C Axial-leaded UL, CSA, TÜV Battery
VLR 12V - 1.7 to 2.3A -40 to 85°C Axial-leaded UL, CSA, TÜV Battery
VTP 16V - 1.1 to 2.1A -40 to 85°C Axial-leaded UL, CSA, TÜV Battery
87
Table 2 Thermal Derating
PolySwitch Device
Family -40°C -20°C 0°C 20°C 25°C 30°C 40°C 50°C 60°C 70°C 85°C 125°C
LVR005-055 - 1.48 1.24 1.00 0.99 0.93 0.82 0.72 0.60 0.51 0.35 -
LVR075-200 - 1.69 1.34 1.00 0.99 0.95 0.88 0.80 0.73 0.66 0.55 -
LVRL - 1.43 1.21 1.00 0.99 0.95 0.86 0.78 0.70 0.62 0.50 -
RGEF 1.54 1.37 1.21 1.04 1.00 0.96 0.88 0.79 0.71 0.63 0.50 -
RHEF 1.50 1.35 1.19 1.04 1.00 0.96 0.88 0.81 0.73 0.65 0.54 0.23
RTEF 1.48 1.32 1.16 1.00 0.96 0.92 0.84 0.76 0.68 0.60 0.48 -
RUEF 1.48 1.32 1.16 1.00 0.96 0.92 0.84 0.76 0.68 0.60 0.48 -
RKEF 1.45 1.30 1.15 1.00 0.97 0.92 0.83 0.77 0.68 0.61 0.52 -
RXEF 1.56 1.37 1.19 1.00 0.95 0.91 0.82 0.72 0.63 0.54 0.40 -
RUSBF 1.41 1.27 1.14 1.00 0.97 0.93 0.87 0.80 0.73 0.66 0.56 -
femtoSMDC 1.59 1.39 1.18 1.05 1.00 0.86 0.78 0.66 0.61 0.47 0.41 -
microSMD 1.45 1.30 1.15 1.00 0.96 0.93 0.85 0.78 0.70 0.63 0.51 -
midSMD 1.41 1.27 1.14 1.00 0.97 0.93 0.87 0.80 0.73 0.66 0.56 -
miniSMD 1.45 1.30 1.15 1.00 0.96 0.93 0.85 0.78 0.70 0.63 0.51 -
nanoSMD 1.56 1.39 1.15 1.04 1.00 0.96 0.87 0.79 0.70 0.61 0.49 -
picoSMD 1.45 1.30 1.15 1.00 0.96 0.93 0.85 0.78 0.70 0.63 0.51 -
SMD 1.45 1.30 1.15 1.00 0.96 0.93 0.85 0.78 0.70 0.63 0.51 -
BD 1.50 1.35 1.19 1.04 1.00 0.96 0.88 0.81 0.73 0.65 0.54 0.23
AGRF 1.54 1.37 1.21 1.04 1.00 0.96 0.88 0.79 0.71 0.63 0.50 -
AHRF 1.50 1.35 1.19 1.04 1.00 0.96 0.88 0.81 0.73 0.65 0.54 0.23
AHS 1.41 1.28 1.16 1.03 1.00 0.97 0.91 0.84 0.78 0.72 0.62 0.37
ASMD 1.59 1.41 1.23 1.05 1.00 0.95 0.86 0.77 0.68 0.59 0.45 -
AHEF 1.36 1.25 1.14 1.03 1.00 0.96 0.89 0.81 0.74 0.66 0.55 0.20
BBRF 1.56 1.37 1.19 1.00 0.95 0.91 0.82 0.72 0.63 0.54 0.40 -
TCF 1.54 1.36 1.18 1.00 0.96 0.91 0.82 0.73 0.64 0.55 0.42 -
TRF 1.54 1.36 1.18 1.00 0.96 0.91 0.82 0.73 0.64 0.55 0.42 -
TS 1.54 1.36 1.18 1.00 0.96 0.91 0.82 0.73 0.64 0.55 0.42 -
MXP 1.99 1.68 1.37 1.07 1.00 0.91 0.76 0.61 0.45 0.30 0.07 -
LR4 1.41 1.27 1.14 1.00 0.97 0.93 0.87 0.80 0.73 0.66 0.56 -
LTP 1.72 1.48 1.24 1.00 0.94 0.88 0.76 0.64 0.52 0.40 0.22 -
SRP 1.47 1.31 1.16 1.00 0.96 0.92 0.85 0.77 0.69 0.61 0.50 -
VLP 1.88 1.67 1.43 1.05 1.00 0.95 0.76 0.62 0.48 0.33 0.04 -
VLR 2.05 1.70 1.41 1.08 1.00 0.92 0.74 0.59 0.41 0.18 - -
VTP 1.88 1.67 1.43 1.05 1.00 0.95 0.76 0.62 0.48 0.33 0.04 -
10
88
PolySwitch Resettable Devices – Product Selection Guide
PolySwitch Device Selection Guide
Step 1. Determine your circuit’s parameters

You will need to determine the following parameters of your circuit:
• Maximum ambient operating temperature
• Normal operating current
• Maximum operating voltage
• Maximum interrupt current
Step 2. Select a PolySwitch device that will accommodate the circuit’s maximum ambient temperature and
normal operating current.
Use the Thermal Derating [Hold Current (A) at Ambient Temperature (°C)] table and choose the temperature that most closely matches the
circuit's maximum ambient temperature. Look down that column to find the value equal to or greater than the circuit’s normal operating
current. Now look to the far left of that row to find the part number that will best accommodate that current.
Step 3. Compare the selected device’s maximum electrical ratings with the circuit’s maximum operating
voltage and interrupt current.
Use the Electrical Characteristics table to verify the part you selected in Step 2 will handle your circuit's maximum operating voltage and
interrupt current. Find the device’s maximum operating voltage (VMAX) and maximum interrupt current (IMAX). Ensure that VMAX and IMAX are
greater than or equal to the circuit’s maximum operating voltage and maximum fault current.
Step 4. Determine time-to-trip

Time-to-trip is the amount of time it takes for a device to switch to a high-resistance state once a fault current has been applied through the
device. Identifying the PolySwitch device’s time-to-trip is important in order to provide the desired protection capabilities. If the chosen
device trips too fast, undesired or nuisance tripping may occur. If the device trips too slowly, the components being protected may be
damaged before the device can trip and limit the current.
Use the Typical Time-to-trip Curves at 20°C to determine if the PolySwitch device’s time-to-trip characteristics are acceptable at expected
fault levels. If not, go back to Step 2 and choose an alternate device.
Step 5. Verify ambient operating temperature

Ensure that your application’s minimum and maximum ambient temperatures are within the operating temperature of the PolySwitch
device. Most PolySwitch devices have an operating temperature range from -40°C to 85°C with some exceptions to 125°C.
Step 6. Verify the PolySwitch device dimensions

Use the Dimensions table to compare the dimensions of the PolySwitch device you selected with the application’s space considerations.
Definitions of terms
lH the maximum steady state current at 20°C that can be passed through a PolySwitch device without causing the device to trip
lT the minimum current that will cause the PolySwitch device to trip at 20°C
VMAX the maximum voltage that can safely be dropped across a PolySwitch device in its tripped state also called:
Maximum Device Voltage, Maximum Voltage, Vmax, Max Interrupt Voltage
10
lMAX the maximum fault current that can safely be used to trip a PolySwitch device
PD the power (in watts) dissipated by a PolySwitch device in its tripped state
RMAX the maximum resistance prior to the trip of PolySwitch device
RMIN the minimum resistance prior to the trip of PolySwitch device
R1MAX the maximum resistance of a PolySwitch device at 20°C 1 hour after being tripped and reset or after reflow soldering
RTripped Typ the typical resistance of PolySwitch 1 hour after the initial trip and reset
89
10
90
PolySwitch Resettable Devices – Surface-mount Devices
Surface-mount Devices
PolySwitch surface-mount devices are the preferred

circuit protection method for computer, consumer,
multimedia, portable, and automotive electronics
applications.
In an affort to reduce the size and cost of surface-mount

devices, we introduced the miniSMD product series in
1995. Subsequently, we developed the microSMD,
nanoSMD, picoSMD and femtoSMD family of products.
The femtoSMD series reduced the device size to a
1608mm (0603 mils) footprint, one twelfth the size of
the popular miniSMD series.
Recent additions to the PolySwitch surface-mount series

include 3.0A miniSMD 4532mm (1812 mils), 2.0A
nanoSMD 3216mm (1206 mils) and 0.16A femtoSMD
1608mm (0603 mils) devices.
Benefits Features
• Smaller size saves board space and cost • RoHS compliant
• Many product choices give engineers more design • Halogen free
flexibility (refers to: Brⱕ900ppm, Clⱕ900ppm, Br+Clⱕ1500ppm)
• Compatible with high-volume electronics assembly • Broadest range of resettable devices available in the
• Assists in meeting regulatory requirements industry
• Higher voltage ratings allow use in new applications • Current ratings from 0.05 to 3A
• Voltage ratings from 6V computer and electronic
applications to 60V telecom applications
• Agency recognition: UL, CSA, TÜV
• Small footprint
• Fast time-to-trip
• Low resistance
10
Applications
• Computer • Game machines • Automotive
• Portable electronics • Telephony and broadband • Industrial controls
• Multimedia • Mobile phones • Battery
91
Application Selection Table for Surface-mount Devices
• The table below lists PolySwitch surface-mount devices typically used in these applications.
• Specifications for the suggested PolySwitch surface-mount device part numbers can be found in this section.
• Once a part has been selected, the user should evaluate and test each product for the intended application.
PolySwitch Resettable Devices - Key Selection Criteria

Overcurrent Fast Time-to-trip
Protection Application Additional Comments Overvoltage Small Size Low Resistance (Temperature Protection)
AC adapter input power use w/ Zener & triac SMD250F SMD250F SMD200F
Battery pack protection nanoSMDC150F miniSMDC260F miniSMDE190F
Charger protection nanoSMDC050F miniSMDC110F/16 nanoSMDC075F
CPU/IC protection nanoSMDC110F nanoSMDC150F nanoSMDC075F
Data acquisition/sensor microSMD005F - microSMD005F
DC input/output power ≤6V nanoSMDC075F nanoSMDC150F nanoSMDC050F/13.2
≤12V miniSMDC075F miniSMDC110F/16 miniSMDC075F
DDC nanoSMDC075F nanoSMDC110F nanoSMDC050F/13.2
Device bay system DB12, DB20 miniSMDC200F miniSMDC260F miniSMDC200F
DB32 miniSMDC260F SMD300F miniSMDC200F
Ethernet/LAN nanoSMDC050F/13.2 miniSMDC110F/16 nanoSMDC075F
Fan microSMD035F microSMD050F microSMD035F
HDMI picoSMDC035S picoSMDC035S picoSMDC035S
IEEE 802.3af VOIP decaSMDC050F/60 decaSMDC050F/60 decaSMDC050F/60
IEEE-1394 power provider SMD100F/33 SMD185F SMD100F/33
alt. power provider SMD185F SMD185F SMD150F/33
self-powered SMD185F SMD185F SMD150F/33
LCD inverter nanoSMDC050F/13.2 miniSMDC110F/16 nanoSMDC075F
LCD screen power nanoSMDC050F/13.2 nanoSMDC050F/13.2 microSMD035F
LNB (Low Noise Block) SMD075F SMD075F SMD050F
Motor ≤6V nanoSMDC110F nanoSMDC150F microSMD075F
≤13.2V miniSMDC075F miniSMDC110F/16 miniSMDC075F
PS/2 mouse/keyboard nanoSMDC075F nanoSMDC110F nanoSMDC050F/13.2
Signal - data communication ≤6V nanoSMDC075F nanoSMDC075F nanoSMDC075F
≤13.2V miniSMDC050F miniSMDC075F miniSMDC020F
≤30V SMD030F-2018 SMD075F SMD050F
SCSI nanoSMDC110F nanoSMDC150F nanoSMDC075F
SIM/Smart card reader femtoSMDC010F femtoSMDC010F femtoSMDC005F
Telecom - modem Digital line OC miniSMDC014F miniSMDC014F miniSMDC014F
Telecom - PBX Subscriber OC miniSMDC014F miniSMDC014F miniSMDC014F
Temperature sensor CPU nanoSMDC050F/13.2 nanoSMDC075F nanoSMDC050F/13.2
USB Individual Port nanoSMDC075F nanoSMDC110F nanoSMDC050F/13.2
2 port ganged nanoSMDC150F miniSMDC150F miniSMDC125F
10 3 port ganged miniSMDC200F miniSMDC200F miniSMDC200F
Note : This list is not exhaustive. Tyco Electronics welcomes our customers’ input for additional application ideas for PolySwitch resettable devices.

Product Series: Size, Current Rating, Voltage Rating/Maximum Resistance for
Table S1
Surface-mount Devices
femtoSMD picoSMD nanoSMD microSMD miniSMD midSMD SMD SMD2 miniSMDE decaSMD
Size mm 1608 2012 3216 3225 4532 5050 7555 8763 11550 5050
(mils) (0603) (0805) (1206) (1210) (1812) (2018) (2920) (3425) (4420) (2018)
Hold Current (A)

0.050 15VDC/30.00Ω* — — 30VDC/50Ω — — — — — —
0.100 12VDC/8.00Ω* 15VDC/11.00Ω* — 30VDC/15Ω 60VDC/12.70Ω — — — — —
0.120 — 15VDC/9.00Ω* 48VDC/6.50Ω — — — — — — —
0.140 — — — — 60VDC/6.00Ω — — — — —
0.160 9VDC/4.20Ω — 48VDC/5.00Ω — — — — — — —
0.200 — 9VDC/3.20Ω 24VDC/3.10Ω — 30VDC/3.30Ω — — — — —
0.300 — — — — 30VDC/1.75Ω 60VDC/2.30Ω 60VDC/4.80Ω — — —
0.350 — 6VDC/1.40Ω 16VDC/1.35Ω 6VDC/1.30Ω — — — — — —
0.500 — — 13.2VDC/0.75Ω 13.2VDC/0.90Ω 24VDC/1.00Ω — 60VDC/1.40Ω — — 60VDC/1.10Ω
0.750 — 6VDC/0.35Ω* 6VDC/0.30Ω 6VDC/0.40Ω 13.2VDC/0.45Ω — 30VDC/1.00Ω — — —
— — — — 24VDC/0.29Ω — 60VDC/1.00Ω — — —
1.000 — 6VDC/0.19Ω* — — — 15VDC/0.40Ω 30VDC/0.48Ω — — —
— — — — — — 33VDC/0.41Ω — — —
1.100 — — 6VDC/0.20Ω 6VDC/0.21Ω 8VDC/0.21Ω — — — — —
— — — — 16VDC/0.18Ω — — — — —
— — — — 24VDC/0.18Ω — — — — —
1.200 — — — — — — 16VDC/0.34Ω — — —
1.250 — — — — 6VDC/0.14Ω — 15VDC/0.25Ω — — —
— — — — 16VDC/0.14Ω — — — — —
1.500 — — 6VDC/0.11Ω 6VDC/0.11Ω 6VDC/0.11Ω 15VDC/0.18Ω — 15VDC/0.25Ω — —
— — — — 12VDC/0.11Ω — — 33VDC/0.23Ω — —
— — — — 16VDC/0.11Ω — — — — —
— — — — 24VDC/0.12Ω — — — — —
1.600 — — — — 9VDC/0.10Ω — — 16VDC/0.15Ω — —
1.750 — — — 6VDC/0.08Ω — — — — — —
1.850 — — — — — — — 33VDC/0.165Ω — —
1.900 — — — — — — — — 16VDC/0.08Ω —
2.000 — — 6VDC/0.072Ω 6VDC/0.06Ω 8VDC/0.07Ω 6VDC/0.10Ω — 15VDC/0.125Ω — —
2.500 — — — — — — — 15VDC/0.85Ω — —
2.600 — — — — 6VDC/0.043Ω — 6VDC/0.075Ω — — —
— — — — 12VDC/0.047Ω — — — — —
— — — — 13.2VDC/0.050Ω — — — — —
— — — — 16VDC/0.050Ω — — — — —
3.000 — — — — 6VDC/0.036Ω — 6VDC/0.048Ω — — — 10
— — — — — — 15VDC/0.05Ω — — —

Thermal Derating for Surface-mount Devices
Table S2
[Hold Current (A) at Ambient Temperature (°C)]
Maximum Ambient Temperature
Part Number -40°C -20°C 0°C 20°C 25°C 40°C 50°C 60°C 70°C 80°C 85°C 125°C
femtoSMDC Series
Size 1608 mm/0603 mils
coming femtoSMDC005F* 0.08 0.07 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.02 0.02 —
soon
coming femtoSMDC010F* 0.16 0.14 0.12 0.11 0.10 0.09 0.08 0.07 0.06 0.05 0.04 —
soon
NEW femtoSMDC016F 0.25 0.22 0.18 0.17 0.16 0.14 0.12 0.11 0.10 0.08 0.07 —
picoSMDC Series
coming
soon picoSMDC010S* 0.17 0.15 0.13 0.11 0.10 0.09 0.08 0.07 0.06 0.05 0.05 —
coming
soon picoSMDC012S* 0.20 0.17 0.15 0.13 0.12 0.10 0.09 0.08 0.07 0.06 0.05 —
NEW picoSMDC020S 0.30 0.27 0.24 0.21 0.20 0.18 0.16 0.15 0.13 0.12 0.11 —
NEW picoSMDC035S 0.55 0.49 0.44 0.37 0.35 0.31 0.28 0.26 0.23 0.20 0.18 —
coming
soon picoSMDC075S* 1.17 1.05 0.94 0.81 0.75 0.68 0.62 0.57 0.50 0.44 0.41 —
coming
soon picoSMDC100S* 1.52 1.36 1.21 1.10 1.00 0.90 0.83 0.75 0.67 0.60 0.56 —
nanoSMDC Series
nanoSMDC012F 0.20 0.17 0.15 0.13 0.12 0.11 0.10 0.09 0.08 0.07 0.07 —
nanoSMDC016F 0.21 0.20 0.18 0.16 0.16 0.14 0.13 0.12 0.11 0.10 0.09 —
nanoSMDC020F 0.34 0.30 0.26 0.22 0.20 0.17 0.15 0.13 0.11 0.09 0.08 —
nanoSMDC035F 0.58 0.51 0.44 0.38 0.35 0.31 0.28 0.24 0.21 0.18 0.16 —
nanoSMDC050F/13.2 0.78 0.69 0.61 0.52 0.50 0.44 0.39 0.35 0.30 0.25 0.24 —
nanoSMDC075F 1.15 1.04 0.92 0.78 0.75 0.69 0.63 0.58 0.51 0.46 0.43 —
nanoSMDC110F 1.64 1.46 1.30 1.10 1.06 0.92 0.83 0.80 0.65 0.56 0.52 —
nanoSMDC150F 2.20 1.99 1.77 1.55 1.50 1.34 1.23 1.10 1.01 0.90 0.84 —
NEW nanoSMDC200F 2.92 2.64 2.35 2.07 2.00 1.79 1.64 1.50 1.36 1.22 1.15 —
microSMD Series
microSMD005F 0.08 0.07 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.02 0.02 —
microSMD010F 0.15 0.13 0.12 0.10 0.10 0.09 0.08 0.06 0.06 0.05 0.05 —
microSMD035F 0.51 0.46 0.40 0.35 0.34 0.30 0.27 0.24 0.22 0.19 0.18 —
microSMD050F 0.76 0.66 0.58 0.50 0.48 0.42 0.38 0.35 0.29 0.25 0.23 —
microSMD075F 1.10 0.97 0.86 0.75 0.72 0.64 0.58 0.55 0.47 0.42 0.39 —
microSMD110F 1.60 1.42 1.26 1.10 1.06 0.94 0.86 0.80 0.70 0.62 0.58 —
microSMD150F 2.30 2.02 1.76 1.50 1.43 1.24 1.11 1.00 0.85 0.72 0.65 —
microSMD175F 2.80 2.45 2.10 1.75 1.70 1.55 1.45 1.35 1.25 1.15 1.10 —
microSMD200F 2.60 2.44 2.35 2.00 1.96 1.78 1.67 1.50 1.45 1.15 1.10 —
miniSMDC Series
NEW miniSMDC010F 0.17 0.15 0.13 0.11 0.10 0.09 0.08 0.07 0.06 0.05 0.04 —
miniSMDC014F 0.23 0.20 0.17 0.14 0.13 0.11 0.10 0.09 0.07 0.06 0.05 —
miniSMDC020F 0.30 0.27 0.23 0.20 0.19 0.17 0.15 0.13 0.12 0.10 0.09 —
NEW miniSMDC030F 0.49 0.44 0.39 0.32 0.30 0.27 0.24 0.22 0.18 0.16 0.14 —
miniSMDC050F 0.59 0.57 0.55 0.50 0.48 0.45 0.43 0.35 0.30 0.25 0.23 —
miniSMDC075F 1.10 0.99 0.87 0.75 0.72 0.63 0.57 0.49 0.45 0.39 0.35 —
miniSMDC075F/24 1.50 1.25 1.00 0.75 0.73 0.65 0.60 0.55 0.50 0.45 0.43 —
10 miniSMDC100F
miniSMDC110F
1.60
1.60
1.45
1.45
1.28
1.28
1.10
1.10
1.07
1.07
0.92
0.92
0.83
0.83
0.71
0.71
0.66
0.66
0.57
0.57
0.52
0.52
—
—
miniSMDC110F/16 1.68 1.49 1.30 1.10 1.05 0.92 0.83 0.75 0.64 0.55 0.50 —
miniSMDC110F/24 2.00 1.70 1.40 1.10 1.06 0.95 0.88 0.80 0.73 0.65 0.61 —
miniSMDC125F 2.00 1.69 1.47 1.25 1.17 1.03 0.92 0.90 0.69 0.58 0.53 —
miniSMDC125F/16 2.00 1.69 1.47 1.25 1.17 1.03 0.92 0.90 0.69 0.58 0.53 —
miniSMDC150F 2.30 2.05 1.77 1.50 1.44 1.23 1.09 0.95 0.82 0.68 0.61 —
miniSMDC150F/12 2.40 2.10 1.80 1.50 1.44 1.25 1.13 1.00 0.88 0.75 0.69 —
miniSMDC150F/16 2.40 2.10 1.80 1.50 1.44 1.25 1.13 1.00 0.88 0.75 0.69 —
miniSMDC150F/24 2.10 1.90 1.70 1.50 1.44 1.25 1.13 1.00 0.88 0.75 0.69 —
miniSMDC160F 2.50 2.19 1.89 1.60 1.53 1.31 1.16 1.10 0.95 0.79 0.71 —
miniSMDC200F 2.60 2.44 2.22 2.00 1.96 1.78 1.67 1.50 1.45 1.34 1.29 —
miniSMDC260F 3.40 3.16 2.80 2.60 2.54 2.32 2.18 2.00 1.90 1.76 1.69 —
miniSMDC260F/12 3.40 3.16 3.00 2.60 2.54 2.32 2.18 2.00 1.90 1.76 1.69 —
miniSMDC260F/13.2 3.40 3.16 3.00 2.60 2.54 2.32 2.18 2.00 1.90 1.76 1.69 —
miniSMDC260F/16 3.50 3.20 3.00 2.60 2.53 2.30 2.15 2.00 1.85 1.70 1.63 —
NEW miniSMDC300F 4.13 3.75 3.33 3.02 3.00 2.70 2.54 2.35 2.22 2.06 1.98 —

Thermal Derating for Surface-mount Devices
Table S2
[Hold Current (A) at Ambient Temperature (°C)] Cont’d

Part Number -40°C -20°C 0°C 20°C 25°C 40°C 50°C 60°C 70°C 80°C 85°C 125°C
miniSMDE Series
miniSMDE190F 3.16 2.74 2.20 1.90 1.74 1.48 1.27 1.10 0.80 0.50 0.35 —
midSMD Series
SMD030F-2018 0.48 0.42 0.35 0.30 0.28 0.24 0.21 0.17 0.15 0.12 0.10 —
decaSMDC050F/60 1.00 0.85 0.70 0.55 0.53 0.45 0.40 0.35 0.30 0.25 0.23 —
SMD100F-2018 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 —
SMD150F-2018 2.21 1.97 1.70 1.50 1.43 1.26 1.15 1.00 0.91 0.79 0.73 —
SMD200F-2018 2.81 2.54 2.27 2.00 1.93 1.73 1.59 1.46 1.32 1.19 1.12 —
SMD Series
SMD030F 0.44 0.39 0.32 0.30 0.28 0.26 0.23 0.19 0.18 0.17 0.15 —
SMD050F 0.73 0.65 0.55 0.50 0.47 0.43 0.39 0.33 0.31 0.28 0.26 —
SMD075F 1.11 0.99 0.84 0.75 0.71 0.63 0.57 0.49 0.45 0.39 0.36 —
SMD075F/60 1.11 0.99 0.84 0.75 0.71 0.63 0.57 0.49 0.45 0.39 0.36 —
SMD100F 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 —
SMD100F/33 1.48 1.35 1.20 1.10 1.06 0.98 0.91 0.83 0.79 0.73 0.69 —
SMDH120 2.34 1.96 1.58 1.20 1.15 1.02 0.92 0.83 0.74 0.65 0.60 0.26
SMD125F 1.89 1.68 1.50 1.25 1.21 1.04 0.93 0.85 0.71 0.61 0.55 —
SMD260F 3.82 3.41 2.90 2.60 2.45 2.19 1.99 1.70 1.58 1.38 1.28 —
SMD300F 4.13 3.75 3.30 3.00 2.87 2.62 2.43 2.25 2.00 1.87 1.78 —
NEW SMD300F/15 4.20 3.80 3.30 3.00 2.90 2.62 2.43 2.25 2.00 1.87 1.78 —
SMD2 Series
SMD150F 2.30 2.04 1.80 1.50 1.45 1.23 1.10 0.99 0.83 0.70 0.63 —
SMD150F/33 2.30 2.04 1.80 1.50 1.45 1.23 1.10 0.99 0.83 0.70 0.63 —
SMDH160 2.14 1.96 1.78 1.60 1.56 1.42 1.33 1.24 1.15 1.06 1.02 0.44
SMD185F 2.54 2.29 2.20 1.85 1.80 1.55 1.43 1.31 1.19 1.06 1.00 —
SMD200F 3.01 2.67 2.30 2.00 1.90 1.66 1.50 1.30 1.16 0.99 0.91 —
SMD250F 3.72 3.31 2.80 2.50 2.35 2.09 1.89 1.60 1.48 1.28 1.18 —
Figure S1 Thermal Derating Curve for Surface-mount Devices
A = femtoSMD / picoSMD / Figure S1

nanoSMD / microSMD /
miniSMD / decaSMD and SMD 200
180
B
10
B = miniSMDE190F
160
% of rated hold and trip current
A
140
C = SMDH120 and SMDH160 C
120
100
80
60
A
40
C
20
B
0
-40 -20 0 20 40 60 80 100 120
Ambient Temperature (˚C)

Table S3 Electrical Characteristics for Surface-mount Devices at Room Temperature
IH IT VMAX IMAX PD MAX Max. Time-to-Trip RMIN R1MAX Figure for

Part Number (A) (A) (VDC) (A) (W) (A) (S) (Ω) (Ω) Dimensions
femtoSMDC Series
coming femtoSMDC005F* 0.05 0.15 15 40 0.50 0.50 0.10 3.80 30.00 S2
soon
coming femtoSMDC010F* 0.10 0.25 12 40 0.50 0.70 0.10 1.70 8.00 S2
soon
NEW femtoSMDC016F 0.16 0.40 9 40 0.50 1.00 0.10 1.00 4.20 S2
picoSMDC Series
coming
soon picoSMDC010S* 0.10 0.30 15 100 0.50 0.50 0.60 1.50 11.00 S2
coming
soon picoSMDC012S* 0.12 0.30 15 100 0.50 1.00 0.10 1.50 9.00 S2
NEW picoSMDC020S 0.20 0.47 9 100 0.50 2.00 0.10 0.75 3.20 S2
NEW picoSMDC035S 0.35 0.75 6 100 0.50 1.75 0.20 0.35 1.40 S2
coming
soon picoSMDC075S* 0.75 1.72 6 100 0.60 8.00 0.10 0.10 0.35 S2
coming
soon picoSMDC100S* 1.00 2.10 6 70 0.60 8.00 0.20 0.06 0.19 S2
nanoSMDC Series
nanoSMDC012F 0.12 0.39 48 10 0.50 1.00 0.20 1.40 6.50 S2
nanoSMDC016F 0.16 0.45 48 10 0.50 1.00 0.30 1.10 5.00 S2
nanoSMDC020F 0.20 0.42 24 100 0.60 8.00 0.10 0.65 3.10 S2
nanoSMDC035F 0.35 0.75 16 20 0.60 3.50 0.10 0.45 1.35 S2
nanoSMDC050F/13.2 0.50 1.10 13.2 100 0.80 8.00 0.10 0.20 0.75 S2
nanoSMDC075F 0.75 1.50 6 100 0.80 8.00 0.10 0.09 0.30 S2
nanoSMDC110F 1.10 2.20 6 100 0.80 8.00 0.10 0.07 0.20 S2
nanoSMDC150F 1.50 3.00 6 100 0.80 8.00 0.30 0.04 0.11 S2
NEW nanoSMDC200F 2.00 4.00 6 100 1.00 8.00 1.50 0.02 0.072 S2
microSMD Series
microSMD005F 0.05 0.15 30 10 1.00 0.25 1.50 3.60 50.00 S2
microSMD010F 0.10 0.25 30 10 0.80 0.50 1.00 2.10 15.00 S2
microSMD035F 0.35 0.75 6 40 0.80 8.00 0.20 0.32 1.30 S2
microSMD050F 0.50 1.00 13.2 40 0.80 8.00 0.05 0.25 0.90 S2
microSMD075F 0.75 1.50 6 40 0.80 8.00 0.10 0.11 0.40 S2
microSMD110F 1.10 2.20 6 40 0.80 8.00 0.20 0.07 0.21 S2
microSMD150F 1.50 3.00 6 40 0.80 8.00 1.00 0.04 0.11 S2
microSMD175F 1.75 3.50 6 40 0.80 8.00 0.80 0.025 0.08 S2
microSMD200F 2.00 4.00 6 100 0.80 8.00 2.50 0.020 0.06 S2
miniSMDC Series
NEW miniSMDC010F 0.10 0.30 60 40 0.75 0.50 5.00 0.70 12.70 S2
miniSMDC014F 0.14 0.28 60 10 0.75 8.00 0.008 1.50 6.00 S2
miniSMDC020F 0.20 0.40 30 10 0.80 8.00 0.02 0.60 3.30 S2
NEW miniSMDC030F 0.30 0.60 30 40 0.80 8.00 0.10 0.20 1.75 S2
miniSMDC050F 0.50 1.00 24 100 0.80 8.00 0.15 0.15 1.00 S2
miniSMDC075F 0.75 1.50 13.2 100 1.00 8.00 0.20 0.11 0.45 S2
miniSMDC075F/24 0.75 1.50 24 40 0.80 8.00 0.30 0.09 0.29 S2
miniSMDC100F 1.10 2.20 8 100 1.20 8.00 0.30 0.04 0.21 S2
10 miniSMDC110F
miniSMDC110F/16
1.10
1.10
2.20
2.20
8
16
100
100
1.20
0.80
8.00
8.00
0.30
0.30
0.04
0.06
0.21
0.18
S2
S2
miniSMDC110F/24 1.10 2.20 24 20 0.80 8.00 0.50 0.06 0.18 S2
miniSMDC125F 1.25 2.50 6 100 0.80 8.00 0.40 0.05 0.14 S2
miniSMDC125F/16 1.25 2.50 16 100 0.80 8.00 0.40 0.05 0.14 S2
miniSMDC150F 1.50 3.00 6 100 0.80 8.00 0.50 0.04 0.11 S2
miniSMDC150F/12 1.50 2.80 12 100 0.80 8.00 0.50 0.04 0.11 S2
miniSMDC150F/16 1.50 2.80 16 100 0.80 8.00 0.50 0.04 0.11 S2
miniSMDC150F/24 1.50 3.00 24 20 1.00 8.00 1.50 0.04 0.12 S2
miniSMDC160F 1.60 3.20 9 100 0.80 8.00 1.00 0.03 0.10 S2
miniSMDC200F 2.00 4.00 8 100 1.00 8.00 5.00 0.020 0.070 S2
miniSMDC260F 2.60 5.00 6 100 1.00 8.00 5.00 0.015 0.043 S2
miniSMDC260F/12 2.60 5.00 12 100 1.00 8.00 5.00 0.015 0.047 S2
miniSMDC260F/13.2 2.60 5.00 13.2 100 1.20 8.00 5.00 0.015 0.050 S2
miniSMDC260F/16 2.60 5.00 16 100 1.20 8.00 5.00 0.015 0.050 S2
NEW miniSMDC300F 3.00 6.00 6 100 1.00 8.00 5.00 0.011 0.036 S2

Table S3 Electrical Characteristics for Surface-mount Devices at Room Temperature Cont’d
IH IT VMAX IMAX PD MAX Max. Time-to-Trip RMIN R1MAX Figure for

Part Number (A) (A) (VDC) (A) (W) (A) (S) (Ω) (Ω) Dimensions
miniSMDE Series
miniSMDE190F 1.90 3.80 16 100 1.50 10.00 2.00 0.024 0.08 S2
midSMD Series
SMD030F-2018 0.30 0.80 60 20 1.50 1.50 1.50 0.500 2.30 S3
decaSMDC050F/60 0.55 1.10 60 10 1.00 8.00 0.10 0.200 1.10 S2
SMD100F-2018 1.10 2.20 15 40 1.40 8.00 0.50 0.100 0.40 S3
SMD150F-2018 1.50 3.00 15 40 1.80 8.00 1.00 0.070 0.18 S3
SMD200F-2018 2.00 4.20 6 40 1.50 8.00 3.00 0.048 0.10 S3
SMD Series
SMD030F 0.30 0.60 60 10 1.70 1.50 3.00 1.200 4.800 S4
SMD050F 0.50 1.00 60 10 1.70 2.50 4.00 0.350 1.400 S4
SMD075F 0.75 1.50 30 40 1.70 8.00 0.30 0.350 1.000 S4
SMD075F/60 0.75 1.50 60 10 1.70 8.00 0.30 0.350 1.000 S4
SMD100F 1.10 2.20 30 40 1.70 8.00 0.50 0.120 0.480 S4
SMD100F/33 1.10 2.20 33 40 1.70 8.00 0.50 0.120 0.410 S4
SMDH120 1.20 2.30 16 50 2.00 8.00 2.00 0.150 0.340 S4
SMD125F 1.25 2.50 15 40 1.70 8.00 2.00 0.070 0.250 S4
SMD260F 2.60 5.20 6 40 1.70 8.00 20.00 0.025 0.075 S4
SMD300F 3.00 6.00 6 40 1.50 8.00 35.00 0.015 0.048 S4
NEW SMD300F/15 3.00 6.00 15 40 1.50 8.00 35.00 0.015 0.050 S4
SMD2 Devices
SMD150F 1.50 3.00 15 40 1.90 8.00 5.00 0.060 0.250 S4
SMD150F/33 1.50 3.00 33 40 1.90 8.00 5.00 0.080 0.230 S4
SMDH160 1.60 3.20 16 70 2.20 8.00 15.00 0.050 0.150 S4
SMD185F 1.85 3.60 33 40 1.50 8.00 5.00 0.065 0.165 S4
SMD200F 2.00 4.00 15 40 1.90 8.00 12.00 0.050 0.125 S4
SMD250F 2.50 5.00 15 40 1.90 8.00 25.00 0.035 0.085 S4
Figure S2-S4 Dimension Figures for Surface-mount Devices
Figure S2 Figure S3 Figure S4
A B
C
C
C
F
B H B
G
10
F
D E D E
A A
D E

Table S4 Dimensions for Surface-mount Devices in Millimeters (Inches)
A B C D E F G H
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Figure
femtoSMDC Series
coming femtoSMDC005F* 1.40 1.80 0.45 0.85 0.60 1.00 0.10 0.50 0.075 — — — — — — S2
soon
(0.055) (0.071) (0.017) (0.033) (0.023) (0.039) (0.004) (0.020) (0.003) — — — — — —
coming
soon femtoSMDC010F* 1.40 1.80 0.45 0.85 0.60 1.00 0.10 0.50 0.075 — — — — — — S2
(0.055) (0.071) (0.017) (0.033) (0.023) (0.039) (0.004) (0.020) (0.003) — — — — — —
NEW femtoSMDC016F 1.40 1.80 0.35 0.75 0.60 1.00 0.10 0.50 0.075 — — — — — — S2
(0.055) (0.071) (0.013) (0.030) (0.023) (0.039) (0.004) (0.020) (0.003) — — — — — —
picoSMDC Series
coming
soon picoSMDC010S* 2.00 2.20 0.44 0.68 1.30 1.50 0.25 0.75 0.076 — — — — — — S2
(0.079) (0.087) (0.017) (0.027) (0.051) (0.059) (0.010) (0.030) (0.003) — — — — — —
coming
soon picoSMDC012S* 2.00 2.20 0.44 0.68 1.30 1.50 0.25 0.75 0.076 — — — — — — S2
(0.079) (0.087) (0.017) (0.027) (0.051) (0.059) (0.010) (0.030) (0.003) — — — — — —
NEW picoSMDC020S 2.00 2.20 0.44 0.68 1.30 1.50 0.25 0.75 0.076 — — — — — — S2
(0.079) (0.087) (0.017) (0.027) (0.051) (0.059) (0.010) (0.030) (0.003) — — — — — —
NEW picoSMDC035S 2.00 2.20 0.44 0.68 1.30 1.50 0.25 0.75 0.076 — — — — — — S2
(0.079) (0.087) (0.017) (0.027) (0.051) (0.059) (0.010) (0.030) (0.003) — — — — — —
coming
soon picoSMDC075S* 2.00 2.20 0.67 0.92 1.30 1.50 0.25 0.75 0.076 — — — — — — S2
(0.079) (0.087) (0.026) (0.036) (0.051) (0.059) (0.010) (0.030) (0.003) — — — — — —
coming
soon picoSMDC100S* 2.00 2.20 0.57 0.82 1.30 1.50 0.25 0.75 0.076 — — — — — — S2
(0.079) (0.087) (0.022) (0.032) (0.051) (0.059) (0.010) (0.030) (0.003) — — — — — —
nanoSMDC Series
nanoSMDC012F 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
nanoSMDC016F 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
nanoSMDC020F 3.00 3.40 0.58 0.82 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
nanoSMDC035F 3.00 3.40 0.58 0.82 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
nanoSMDC050F/13.2 3.00 3.40 0.50 0.74 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.019) (0.029) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
nanoSMDC075F 3.00 3.40 0.44 0.68 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.017) (0.027) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
nanoSMDC110F 3.00 3.40 0.28 0.67 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.011) (0.026) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
nanoSMDC150F 3.00 3.40 0.55 0.89 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.022) (0.035) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
NEW nanoSMDC200F 3.00 3.40 0.83 1.10 1.37 1.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.134) (0.033) (0.043) (0.054) (0.071) (0.010) (0.030) (0.003) — — — — — —
microSMD Series
microSMD005F 3.0 3.43 0.50 0.85 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —
10 microSMD010F 3.0 3.43 0.50 0.85 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —
microSMD035F 3.0 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —
microSMD050F 3.0 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —
microSMD075F 3.0 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —
microSMD110F 3.0 3.43 0.28 0.48 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.011) (0.019) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —
microSMD150F 3.0 3.43 0.51 1.22 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.020) (0.048) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —
microSMD175F 3.0 3.43 0.40 0.76 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.016) (0.030) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —
microSMD200F 3.0 3.43 0.79 1.17 2.35 2.80 0.25 0.75 0.076 — — — — — — S2
(0.118) (0.135) (0.031) (0.046) (0.092) (0.110) (0.010) (0.030) (0.003) — — — — — —

Table S4 Dimensions for Surface-mount Devices in Millimeters (Inches) Cont’d
A B C D E F G H
miniSMDC Series
NEW miniSMDC010F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC014F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC020F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 S2
(0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
NEW miniSMDC030F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC050F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 S2
(0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC075F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 S2
(0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC075F/24 4.37 4.83 0.81 1.46 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.190) (0.032) (0.057) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC100F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC110F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC110F/16 4.37 4.83 0.28 0.48 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC110F/24 4.37 4.83 0.81 1.46 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.190) (0.032) (0.057) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC125F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC125F/16 4.37 4.83 0.28 0.48 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC150F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC150F/12 4.37 4.83 0.28 0.48 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC150F/16 4.37 4.83 0.28 0.48 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.190) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC150F/24 4.37 4.83 1.00 1.94 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.190) (0.040) (0.077) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC160F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC200F 4.37 4.73 0.51 1.22 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.020) (0.048) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC260F 4.37 4.73 0.48 0.78 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.019) (0.031) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC260F/12 4.37 4.83 1.02 1.52 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
miniSMDC260F/13.2
(0.172) (0.190)
4.37 4.83
(0.042) (0.060)
1.02 1.52
(0.121) (0.134)
3.07 3.41
(0.010) (0.040)
0.25 0.95
(0.008)
0.20
—
—
—
—
—
—
—
—
—
—
—
— S2
10
(0.172) (0.190) (0.042) (0.060) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDC260F/16 4.37 4.83 1.02 1.52 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.190) (0.042) (0.060) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
NEW miniSMDC300F 4.37 4.73 0.45 0.76 3.07 3.41 0.25 0.95 0.20 — — — — — — S2
(0.172) (0.186) (0.018) (0.030) (0.121) (0.134) (0.010) (0.040) (0.008) — — — — — —
miniSMDE Series
miniSMDE190F 11.15 11.51 0.33 0.53 4.83 5.33 0.51 1.02 0.381 — — — — — — S2
(0.439) (0.453) (0.013) (0.021) (0.190) (0.210) (0.020) (0.040) (0.015) — — — — — —

Table S4 Dimensions for Surface-mount Devices in Millimeters (Inches) Cont’d
A B C D E F G H
midSMD Series
SMD030F-2018 4.72 5.44 — 1.78 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — S3
(0.186) (0.214) — (0.070) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — —
decaSMDC050F/60 4.70 5.31 0.63 0.89 4.19 4.81 0.25 0.95 0.25 — — — — — — S2
(0.185) (0.209) (0.025) (0.035) (0.165) (0.189) (0.010) (0.040) (0.010) — — — — — —
SMD100F-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — S3
(0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — —
SMD150F-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — S3
(0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — —
SMD200F-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — S3
(0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — —
SMD Series
SMD030F 6.73 7.98 — 3.18 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD050F 6.73 7.98 — 3.18 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD075F 6.73 7.98 — 3.18 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD075F/60 6.73 7.98 — 3.18 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD100F 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD100F/33 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMDH120 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD125F 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD260F 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD300F 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
NEW SMD300F/15 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S4
(0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
SMD2 Devices
SMD150F 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S4
(0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
SMD150F/33 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S4
(0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
SMDH160 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S4
10 SMD185F
(0.315) (0.370)
8.00 9.40
—
—
(0.118)
3.00
(0.236) (0.264)
6.00 6.71
(0.022) (0.028) (0.022) (0.028)
0.56 0.71 0.56 0.71
(0.145) (0.155)
3.68 3.94
(0.026) (0.054)
0.66 1.37
(0.017)
0.43 S4
(0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
SMD200F 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S4
(0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
SMD250F 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S4
(0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)

Figure S5-S15 Typical Time-to-trip Curves at 20°C for Surface-mount Devices
femtoSMDCxxxF Figure S5
A B C
A = femtoSMDC005F* 100
B = femtoSMDC010F*
C = femtoSMDC016F
10
Time-to-trip (s)
0.1
0.01
C
A B
0.001
0.01 0.1 1 10
Fault Current (A)
picoSMDCxxxS Figure S6
A = picoSMDC010S*, picoSMDC012S* 10
B = picoSMDC020S
C = picoSMDC035S E
D
1
D = picoSMDC075S* A B C
E = picoSMDC100S*
Time-to-trip (s)
0.1
0.01 B
D
E
A
0.001
C
0.0001
0.1 1 10 100
Fault Current (A)
nanoSMDCxxxF Figure S7
A = nanoSMDC012F
B = nanoSMDC016F
10
A B
D
10
C = nanoSMDC020F
C F G
D = nanoSMDC035F 1
H
E
E = nanoSMDC050F/13.2
F = nanoSMDC075F
Time-to-trip (s)
G = nanoSMDC110F
0.1
H = nanoSMDC150F
A H
0.01
G
F
E
D
0.001
0.1 1 B 10 100
Fault Current (A)

Figure S5-S15 Typical Time-to-trip Curves at 20°C for Surface-mount Devices Cont’d
Figure S8
nanoSMDC200F
10
A = nanoSMDC200F
1
A
Time-to-trip (s)
0.1
0.01
0.001
1 10 100
Fault Current (A)
Figure S9
microSMDxxxF
100
A = microSMD005F
B = microSMD010F
C D E F
C = microSMD035F 10
D = microSMD050F A B H I
G
E = microSMD075F
Time-to-trip (s)
1
F = microSMD110F
G = microSMD150F B
H = microSMD175F 0.1
I = microSMD200F
0.01
H I
G
A
0.001
0.1 1 10 C D E F 100
Fault Current (A)
Figure S10
miniSMDCxxxF and miniSMDExxxF
10 A = miniSMDC010F, miniSMDC014F 100
AB C D E F G I JK
B = miniSMDC020F
C = miniSMDC050F
10 H
D = miniSMDC075F, miniSMDC075F/24
E = miniSMDC100F, miniSMDC110F,
Time-to-trip (s)
miniSMDC110F/16, miniSMDC110F/24 1
F = miniSMDC125F, miniSMDC125F/16
G = miniSMDC150F, miniSMDC150F/12,
0.1
miniSMDC150F/16, miniSMDC150F/24
H = miniSMDC160F K
H J
I = miniSMDC200F 0.01 I
G
J = miniSMDE190F B F
A E
C D
K = miniSMDC260F, miniSMDC260F/12,
0.001
miniSMDC260F/13.2, 0.1 1 10 100
miniSMDC260F/16 Fault Current (A)

miniSMDC030F Figure S11

A = miniSMDC030F 10
Time-to-trip (s)
0.1
0.01
0.001
0.1 1 10 100
Fault Current (A)
Figure S12
miniSMDC300F
10
A = miniSMDC300F
A
Time-to-trip (s)
0.1
1 10 100
Fault Current (A)
Figure S13
midSMD
A C D E
A = SMD030F-2018
100
10
B = decaSMDC050F/60
C = SMD100F-2018 10
D = SMD150F-2018 B
E = SMD200F-2018
Time-to-trip (s)
0.1
A E
0.01
B
D
C
0.001
0.1 1 10 100
Fault Current (A)

Figure S14
SMDxxxF
A B C E F G H
A = SMD030F 100
B = SMD050F
C = SMD075F, SMD075F/60 10
D = SMDH120 D
Time-to-trip (s)
E = SMD100F, SMD100F/33
1
F = SMD125F
G = SMD260F
0.1
H = SMD300F, SMD300F/15
B H
D G
0.01 A
F
C
E
0.001
0.1 1 10 100
Fault Current (A)
Figure S15
SMD2xxxF
A BCDE
100
A = SMD150F, SMD150F/33
B = SMDH160
C = SMD185F 10
D = SMD200F
Time-to-trip (s)
E = SMD250F 1
0.1
E
D
C
0.01 B
A
0.001
0.1 1 10 100
Fault Current (A)
Table S5 Physical Characteristics and Environmental Specifications for Surface-mount Devices

Operating temperature range -40°C to 85°C, -40°C to 125°C for SMDH120 and SMDH160
Terminal pad material 100% matte tin with nickel underplate

Soldering characteristics ANSI/J-STD-002 Category 3 for femtoSMD, picoSMD, nanoSMD, microSMD and miniSMD series
ANSI/J-STD-002 Category 1 for SMD series
10 Solder heat withstand per IEC-STD 68-2-20, Test Tb, Section 5, Method 1A
Flammability resistance per IEC 695-2-2 Needle Flame Test for 20 sec.
Recommended storage conditions 40°C max, 70% R.H. max; devices may not meet specified ratings if storage conditions are exceeded.
Test Test Method Conditions Resistance Change
Storage life Raychem PS300, Section 5.3.2 60°C, 1000 hours ±3% typical
85°C, 1000 hours ±5% typical
Humidity aging Raychem PS300, Section 5.3.1 85°C, 85% RH, 100 hours ±1.2% typical
Thermal shock MIL-STD-202, Method 107G 85°C, -40°C (20 times) -33% typical
125°C, -55°C (10 times) -33% typical
Vibration MIL-STD-883C per MIL-STD-883C No change
Solvent resistance Raychem PS300, Section 5.2.2 Freon No change
Trichloroethane No change
Hydrocarbons No change

Table S6 Packaging and Marking Information for Surface-mount Devices
Recommended Pad Layout Figures [mm(In.)]
Tape & Reel Standard Part Dimension Dimension Dimension Agency
Part Number Quantity Package Marking A (Nom.) B (Nom.) C (Nom.) Recognition
femtoSMDC Series
coming
soon femtoSMDC005F* 4,000 20,000 A 0.80 (0.032) 0.60 (0.024) 0.80 (0.032) UL, CSA
coming
soon femtoSMDC010F* 4,000 20,000 B 0.80 (0.032) 0.60 (0.024) 0.80 (0.032) UL, CSA
NEW femtoSMDC016F 4,000 20,000 E 0.80 (0.032) 0.60 (0.024) 0.80 (0.032) UL, CSA
picoSMDC Series
coming
soon picoSMDC010S* 4,000 20,000 C 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) Pending
coming
soon picoSMDC012S* 4,000 20,000 F 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) Pending
NEW picoSMDC020S 4,000 20,000 H 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) UL, CSA
NEW picoSMDC035S 4,000 20,000 I 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) UL, CSA
coming
soon picoSMDC075S* 3,000 15,000 M 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) Pending
coming
soon picoSMDC100S* 3,000 15,000 S 1.50 (0.060) 1.00 (0.039) 1.20 (0.047) Pending
nanoSMDC Series
nanoSMDC012F 3,000 15,000 P 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV
nanoSMDC016F 3,000 15,000 N 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV
nanoSMDC020F 3,000 15,000 02 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV
nanoSMDC050F/13.2 3,000 15,000 M 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV
nanoSMDC075F 3,000 15,000 L 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV
nanoSMDC110F 3,000 15,000 K 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV
NEW nanoSMDC200F 3,000 15,000 T 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV
microSMD Series
microSMD005F 4,000 20,000 05 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV
miniSMDC Series
NEW miniSMDC010F 2,000 10,000 10 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, CSA
miniSMDC014F 2,000 10,000 14 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, CSA, TÜV
miniSMDC075F/24 1,500 7,500 075F 24V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, CSA, TÜV
miniSMDC100F
miniSMDC110F
2,000
2,000
10,000
10,000
1
1
2.95 (0.114)
2.95 (0.114)
1.68 (0.066)
1.68 (0.066)
3.10 (0.122)
3.10 (0.122)
UL, CSA, TÜV
UL, CSA, TÜV
10
miniSMDC150F/16 2,000 10,000 150 16V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, CSA, TÜV
miniSMDC260F 2,000 10,000 260F 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, CSA, TÜV
miniSMDC260F/13.2 1,500 7,500 260F 13V 2.95 (0.114) 1.68 (0.066) 3.10 (0.122) UL, CSA, TÜV

Table S6 Packaging and Marking Information for Surface-mount Devices Cont’d
Recommended Pad Layout Figures [mm(In.)]

Tape & Reel Standard Part Dimension Dimension Dimension Agency
Part Number Quantity Package Marking A (Nom.) B (Nom.) C (Nom.) Recognition
miniSMDE Series
miniSMDE190F 5,000 20,000 19 4.75 (0.187) 1.45 (0.057) 9.57 (0.377) UL, CSA, TÜV
midSMD Series
SMD030F-2018 4,000 20,000 A03F 4.60 (0.18) 1.50 (0.059) 3.40 (0.134) UL, CSA, TÜV
decaSMDC050F/60 1,000 5,000 050F 60V 4.32 (0.17) 1.40 (0.055) 3.61 (0.142) UL, CSA, TÜV
SMD100F-2018 4,000 20,000 A10F 4.60 (0.18) 1.50 (0.059) 3.40 (0.134) UL, CSA, TÜV
SMD150F-2018 4,000 20,000 A15F 4.60 (0.18) 1.50 (0.059) 3.40 (0.134) UL, CSA, TÜV
SMD200F-2018 4,000 20,000 A20F 4.60 (0.18) 1.50 (0.059) 3.40 (0.134) UL, CSA, TÜV
SMD Series
SMD030F 2,000 10,000 030F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMD050F 2,000 10,000 050F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMD075F 2,000 10,000 075F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMD075F/60 2,000 10,000 756F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMD100F 2,000 10,000 100F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMD100F/33 2,000 10,000 103F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMDH120 2,000 10,000 H12 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMD125F 2,000 10,000 125F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMD260F 2,000 10,000 260F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
SMD300F 2,000 10,000 300F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA, TÜV
NEW SMD300F/15 2,000 10,000 315F 3.10 (0.12) 2.30 (0.09) 5.10 (0.201) UL, CSA
SMD2 Devices
SMD150F 1,500 7,500 150F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV
SMD150F/33 1,500 7,500 153F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV
SMDH160 1,500 7,500 160F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV
SMD185F 1,500 7,500 185F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV
SMD200F 1,500 7,500 200F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV
SMD250F 1,500 7,500 250F 4.60 (0.18) 2.30 (0.09) 6.10 (0.240) UL, CSA, TÜV
Figure S16 Recommended Pad Layout for Surface-mount Devices
B C B
10
Agency Recognition for Surface-mount Devices
UL File # E74889 for all surface-mount devices

CSA File # CA78165 for all surface-mount devices
TÜV Certificate number available upon request (certified to IEC 60730-1)

Solder Reflow and Rework Recommendation for Surface-mount Devices
Classification Reflow Profiles

Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly
Average ramp up rate (TsMAX to Tp) 3°C/second max. 3°C/second max.
Preheat
• Temperature min. (TsMIN) 100°C 150°C
• Temperature max. (TsMAX) 150°C 200°C
• Time (tsMIN to tsMAX) 60-120 seconds 60-120 seconds
• Temperature (TL) 183°C 217°C
• Time (tL) 60-150 seconds 60-150 seconds
Peak/Classification temperature (Tp) 235°C 260°C
Time (tp) 20 seconds max. 30 seconds max.
Ramp down rate 3°C/second max. 3°C/second max.
Time 25°C to peak temperature 6 minutes max. 8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Figure S17
tp
Tp Critical Zone
Ramp up TL to Tp
TL
TsMAX tL
Temperature
TsMIN
ts
Preheat Ramp down
25
t 25˚C to Peak
Reflow Profile Time
Solder Reflow
• Recommended reflow methods:

- IR
- Hot air
- Nitrogen
• Recommended maximum paste thickness: 0.25mm (0.010 inch)
• Devices can be cleaned using standard methods and aqueous solvents.
• We believe the optimum conditions for forming acceptable solder fillets occur when a reasonable amount of solder paste is placed
underneath each device’s termination. As such, we request that customers comply with our recommended solder pad layouts.
10
• Customer should validate that the solder paste amount and reflow recommendations meet its application.
• We request that customer board layouts refrain from placing raised features (e.g. vias, nomenclature, traces, etc.) underneath PolySwitch
devices. It is possible that raised features could negatively impact solderability performance of our devices.
Rework
• femtoSMD, picoSMD, nanoSMD, microSMD and miniSMD series: standard industry practices.
Please also avoid direct contact to the device.
• SMD series: rework should be confined to removal of the installed product and replacement with a fresh device.

Table S7 Tape and Reel Specifications for Surface-mount Devices (in Millimeters)
miniSMDC midSMD
and except
femtoSMDC picoSMDC nanoSMDC microSMD decaSMDC050F/60 miniSMDE190 decaSMDC050F/60 SMD SMD2
Description EIA 481-1 EIA 481-1 EIA 481-1 EIA 481-1 EIA 481-1 EIA 481-2 EIA 481-2 EIA 481-2 EIA 481-2
W 8.0 ± 0.30 8.0 ± 0.30 8.0 ± 0.30 8.0 ± 0.30 12.0 ± 0.30 24.0 ± 0.30 16.0 ± 0.30 16.0 ± 0.30 16.0 ± 0.30
P0 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10
P1 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 8.0 ± 0.10 8.0 ± 0.10 8.0 ± 0.10 8.0 ± 0.10 12.0 ± 0.10
P2 2.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.10 2.0 ± 0.10 2.0 ± 0.10 2.0 ± 0.10
A0 Table S8 Table S8 1.95 ± 0.10 2.9 ± 0.10 Table S8 5.70 ± 0.10 5.11 ± 0.15 5.6 ± 0.23 6.9 ± 0.23
B0 Table S8 Table S8 Table S8 3.50 ± 0.10 Table S8 11.90 ± 0.10 5.6 ± 0.23 8.1 ± 0.15 9.6 ± 0.15
B1 max. 4.35 4.35 4.35 4.35 8.2 20.1 12.1 12.1 12.1
D0 1.55 ± .05 1.55 ± .05 1.55 ± .05 1.55 ± .05 1.5 + 0.10/ -.00 1.55 ± .05 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00
F 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 5.50 ± 0.05 11.50 ± 0.10 7.50 ± 0.10 7.50 ± 0.10 7.50 ± 0.10
E1 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10
E2 min. 6.25 6.25 6.25 6.25 10.25 22.25 14.25 14.25 14.25
T max. 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
T1 max. 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
K0 Table S8 Table S8 Table S8 Table S8 Table S8 0.95 ± 0.10 1.8 ± 0.15 3.2 ± 0.15 3.4 ± 0.15
Leader min. 390 390 390 390 390 400 400 400 400
Trailer min. 160 160 160 160 160 160 160 160 160
Table S8 Tape and Reel Specifications for Surface-mount Devices (in Millimeters)
All
All picoSMDC series nanoSMDC series
except except
femtoSMDC005F picoSMDC075S picoSMDC075S nanoSMDC012F nanoSMDC012F
femtoSMDC010F femtoSMDC016F picoSMDC100S picoSMDC100S nanoSMDC016F nanoSMDC016F
A0 1.00 ± 0.1 1.00 ± 0.1 1.55 ± 0.1 1.60 ± 0.1 1.95 ± 0.1 1.95 ± 0.1
B0 1.85 ± 0.1 1.85 ± 0.1 2.50 ± 0.1 2.45 ± 0.1 3.50 +0.1/-0.08 3.5 ± 0.1
K0 0.90 ± 0.1 0.80 ± 0.1 0.86 ± 0.1 1.35 ± 0.1 0.89 ± 0.1 1.27 ± 0.1
miniSMDC075F/24
All miniSMDC014F~075F miniSMDC110F/24
microSMD series miniSMDC100F~110F/16 miniSMDC260F/12
except miniSMDC125F~150F/16 miniSMDC260F/13.2
microSMD200F microSMD200F miniSMDC160F~260F miniSMDC260F/16 miniSMDC150F/24 decaSMDC050F/60
A0 2.9 ± 0.1 2.9 ± 0.1 3.5 ± 0.1 3.7 ± 0.1 3.7 ± 0.1 5.0 ± 0.1
B0 3.5 ± 0.1 3.5 ± 0.1 4.95 ± 0.1 4.9 ± 0.1 4.9 ± 0.1 5.4 ± 0.1
K0 0.9 ± 0.1 1.27 ± 0.1 0.9 ± 0.1 1.4 ± 0.1 1.78 ± 0.1 1.7 ± 0.1
10
Table S9 Reel Dimensions for Surface-mount Devices (in Millimeters)

femto/pico/nano/microSMD miniSMDC miniSMDE190 midSMD SMD SMD2
A max. 185 185 330 330 330 330
N min. 50 50 60 50 50 50
W1 8.4 + 1.5/-.00 12.4 + 2.0/-.00 24.4 + 2.0/-.00 16.4 + 2.0/-.00 16.4 + 2.0/-.00 16.4 + 2.0/-.00
W2 max. 14.4 18.4 30.4 22.4 22.4 22.4

Figure S18 EIA Referenced Taped Component Dimensions for Surface-mount Devices
Embossment
P0
T D0 P2
E1
Cover tape
A0
F
W
E2
B1 K0 B0
T1 P1
Center lines
of cavity
Figure S19 EIA Referenced Reel Dimensions for Surface-mount Devices
A N (hub dia.)
Cover tape
Carrier tape
Embossed cavity
Part Numbering System for Surface-mount Devices

SMD 150 F /33 -RB -2
Packaging
2 = Tape and Reel
Rx = Resistance Range (Limited part number availability)
Alternative Voltage Rating (If applicable)
Lead Free
Hold Current Indicator
Product Series
10
Warning :
• These devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should
not be used when repeated fault conditions or prolonged trip events are anticipated.
• Contamination of the PPTC material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices.
• PPTC devices are not recommended for installation in applications where the device is constrained such that its PTC properties are inhibited,
for example in rigid potting materials or in rigid housings, which lack adequate clearance to accommodate device expansion.
• Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of the device.

10
110
PolySwitch Resettable Devices – Radial-leaded Devices
Radial-leaded Devices
Tyco Electronics’ PolySwitch radial-leaded products
represent the most comprehensive and complete set of
PPTC products available in the industry today.
• RGEF series for hold currents up to 14A
• RHEF series for flatter thermal derating and
operating temperatures up to 125°C
• RUEF series for balance of voltage rating (30V) and
hold current (up to 9A)
• RUSBF series for fast time-to-trip and low-resistance
computer applications
• RTEF series for IEEE-1394 applications
• RXEF series for low hold currents (down to 50mA)
and high voltage rating (up to 72V)
• RKEF series for balance of voltage rating (60V) and
hold current (up to 5A)
• BBRF series for cable telephone applications
• Now offering RoHS versions of all products
Benefits Features
• Many product choices give engineers more design • RoHS compliant
flexibility • Broadest range of radial-leaded resettable devices
• Compatible with high-volume electronics assembly available in the industry
• Assists in meeting regulatory requirements • Current ratings from 50mA to 15A
• Higher voltage ratings allow use in new applications • Voltage ratings from 6V (computer and electronic
applications) to 99V
• Agency recognition : UL, CSA, TÜV
• Low resistance
Applications 10
• Satellite video receivers • USB hub, ports and peripherals • Phones
• Industrial controls • IEEE1394 ports • Fax machines
• Transformers • CD-ROMs • Analog and digital line cards
• Computer motherboards • Game machines • Printers
• Modems • Battery packs
111
Application Selection Guide for Radial-leaded Devices
The guide below lists PolySwitch radial-leaded devices that are typically used in these applications.
Specifications for the suggested device part numbers can be found in this section.
Once a part number has been selected, the user should evaluate and test each product for its intended application.
PolySwitch Resettable Devices — Key Selection Criteria

Flatter Lower Current
Protection Application Small Size Derating Higher Voltage
Electromagnetic loads RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
Halogen lighting RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
Lighting ballast RXEF (<72V), BBRF (<99V)
Loudspeakers RXEF (<72V) RXEF (<72V), RKEF(<60V)
Medical equipment RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
MOSFET devices RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
Motors, fans and blowers RXEF (<72V), RGEF (<16V) RHEF (<16V)
POS equipment RXEF (<72V), RUEF (<30V)
Process and industrial controls RXEF (<72V), RUEF (<30V)
Satellite video receivers RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
Security and fire alarm systems RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
Test and measurement equipment RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
Transformers RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
DDC computer and consumer electronics RUEF (<30V)
IEEE-1394 computer and consumer electronics RTEF (<33V)
Mouse and keyboard RUEF (<30V)
SCSI RUEF (<30V)
USB RUSBF (<16V)
Traces and printed circuit board protection RGEF (<16V), RUEF (<30V) RHEF (<16V) RXEF (<72V), RKEF(<60V)
Note : This list is not exhaustive. Tyco Electronics welcomes customer's input for additional application ideas for PolySwitch resettable devices.
Product Series - Current Rating, Voltage Rating / Typical Resistance for

Table R1
Radial-leaded Devices
BBRF RXEF RKEF RXEF RTEF RUEF RGEF RHEF RHEF RUSBF RUSBF
Voltage Rating 99V 72V 60V 60V 33V 30V 16V 16V 30V 16V 6V
Hold Current (A)
0.050 — — — 9.20Ω — — — — — — —
0.100 — — — 3.50Ω — — — — — — —
0.170 — — — 4.30Ω — — — — — — —
0.200 — 2.290Ω — — — — — — — — —
0.250 — 1.600Ω — — — — — — — — —
0.300 — 1.110Ω — — — — — — — — —
10 0.400 — 0.710Ω — — — — — — — — —
0.500 — 0.640Ω 0.425Ω — — — — — 0.68Ω — —
0.550 1.05Ω — — — — — — — — — —
0.650 — 0.400Ω 0.350Ω — — — — — — — —
0.700 — — — — — — — — 0.42Ω — —
0.750 — 0.325Ω 0.295Ω — — — — — — — 0.140Ω
0.900 — 0.255Ω 0.255Ω — — 0.095Ω — — — 0.100Ω —
1.000 — — — — — — — — 0.24Ω — —
1.100 — 0.200Ω 0.225Ω — — 0.075Ω — — — 0.075Ω —
1.200 — — — — 0.097Ω — — — — — 0.080Ω
1.350 — 0.155Ω 0.165Ω — 0.080Ω 0.060Ω — — — 0.060Ω —
1.550 — — — — — — — — — — 0.058Ω
1.600 — 0.115Ω 0.150Ω — — 0.050Ω — — — 0.050Ω —
1.850 — 0.100Ω 0.106Ω — — 0.045Ω — — — 0.045Ω —
1.900 — — — — 0.054Ω — — — — — —

Table R1
Radial-leaded Devices Cont’d
BBRF RXEF RKEF RXEF RTEF RUEF RGEF RHEF RHEF RUSBF RUSBF
Voltage Rating 99V 72V 60V 60V 33V 30V 16V 16V 30V 16V 6V
Hold Current (A)
2.000 — — — — — — — 0.0610Ω — — —
2.500 — 0.065Ω 0.063Ω — — 0.030Ω 0.0380Ω — — 0.030Ω —
3.000 — 0.050Ω 0.040Ω — — 0.035Ω 0.0514Ω 0.0430Ω — — —
3.750 — 0.040Ω 0.029Ω — — — — — — — —
4.000 — — 0.026Ω — — 0.020Ω 0.0300Ω 0.0320Ω — — —
4.500 — — — — — — — 0.0290Ω — — —
5.000 — — 0.021Ω — — 0.020Ω 0.0192Ω — — — —
5.500 — — — — — — — 0.0200Ω — — —
6.000 — — — — — 0.013Ω 0.0145Ω 0.0175Ω — — —
6.500 — — — — — — — 0.0144Ω — — —
7.000 — — — — — 0.013Ω 0.0105Ω 0.0132Ω — — —
7.500 — — — — — — — 0.0120Ω — — —
8.000 — — — — — 0.013Ω 0.0086Ω 0.0110Ω — — —
9.000 — — — — — 0.008Ω 0.0070Ω 0.0100Ω — — —
10.00 — — — — — — 0.0056Ω 0.0083Ω — — —
11.00 — — — — — — 0.0050Ω 0.0073Ω — — —
12.00 — — — — — — 0.0046Ω — — — —
13.00 — — — — — — — 0.0055Ω — — —
14.00 — — — — — — 0.0040Ω 0.0050Ω — — —
15.00 — — — — — — — 0.0050Ω — — —
Thermal Derating for Radial-leaded Devices

Table R2
Part Number -40°C -20°C 0°C 20°C 25°C 40°C 50°C 60°C 70°C 85°C 125°C
BBRF
99V
BBRF550 0.85 0.75 0.65 0.55 — 0.45 0.40 0.35 0.30 0.22 —
RXEF
60V
RXEF005 0.078 0.068 0.06 0.05 0.048 0.04 0.035 0.032 0.027 0.02 —
RXEF010 0.160 0.140 0.11 0.10 0.096 0.08 0.072 0.067 0.050 0.04 —
RXEF017 0.260 0.230 0.21 0.17 0.160 0.14 0.120 0.110 0.090 0.07 —
RXEF
72V
RXEF020
RXEF025
0.31
0.39
0.27
0.34
0.24
0.30
0.20
0.25
0.19
0.24
0.16
0.20
0.14
0.18
0.13
0.16
0.11
0.14
0.08
0.10
—
—
10
RXEF030 0.47 0.41 0.36 0.30 0.29 0.24 0.22 0.20 0.16 0.12 —
RXEF040 0.62 0.54 0.48 0.40 0.38 0.32 0.29 0.25 0.22 0.16 —
RXEF050 0.78 0.68 0.60 0.50 0.48 0.41 0.36 0.32 0.27 0.20 —
RXEF065 1.01 0.88 0.77 0.65 0.62 0.53 0.47 0.41 0.35 0.26 —
RXEF075 1.16 1.02 0.89 0.75 0.72 0.61 0.54 0.47 0.41 0.30 —
RXEF090 1.40 1.22 1.07 0.90 0.86 0.73 0.65 0.57 0.49 0.36 —
RXEF110 1.71 1.50 1.31 1.10 1.06 0.89 0.79 0.69 0.59 0.44 —
RXEF135 2.09 1.84 1.61 1.35 1.30 1.09 0.97 0.85 0.73 0.54 —
RXEF160 2.48 2.18 1.90 1.60 1.54 1.30 1.15 1.01 0.86 0.64 —
RXEF185 2.87 2.52 2.20 1.85 1.78 1.50 1.33 1.17 1.00 0.74 —
RXEF250 3.88 3.40 2.98 2.50 2.40 2.03 1.80 1.58 1.35 1.00 —
RXEF300 4.65 4.08 3.57 3.00 2.88 2.43 2.16 1.89 1.62 1.20 —
RXEF375 5.81 5.10 4.46 3.75 3.60 3.04 2.70 2.36 2.03 1.50 —
RoHS Compliant, ELV Compliant 113

Table R2

RKEF
60V
RKEF050 0.73 0.65 0.58 0.50 0.48 0.42 0.38 0.34 0.31 0.26 —
RKEF065 0.94 0.85 0.75 0.65 0.63 0.54 0.50 0.44 0.40 0.34 —
RKEF075 1.09 0.98 0.86 0.75 0.73 0.62 0.58 0.51 0.46 0.39 —
RKEF090 1.30 1.17 1.04 0.90 0.87 0.75 0.69 0.61 0.55 0.47 —
RKEF110 1.60 1.43 1.27 1.10 1.06 0.92 0.85 0.75 0.67 0.57 —
RKEF135 1.96 1.76 1.55 1.35 1.31 1.12 1.04 0.92 0.83 0.71 —
RKEF160 2.32 2.08 1.84 1.60 1.55 1.33 1.23 1.08 0.98 0.83 —
RKEF185 2.68 2.41 2.13 1.85 1.79 1.54 1.43 1.26 1.13 0.96 —
RKEF250 3.63 3.25 2.88 2.50 2.43 2.08 1.93 1.70 1.52 1.31 —
RKEF300 4.35 3.90 3.45 3.00 2.91 2.50 2.30 2.04 1.84 1.55 —
RKEF375 5.44 4.88 4.31 3.75 3.64 3.11 2.90 2.54 2.29 1.94 —
RKEF400 5.80 5.20 4.60 4.00 3.88 3.32 3.08 2.73 2.45 2.08 —
RKEF500 7.25 6.50 5.75 5.00 4.85 4.15 3.85 3.41 3.06 2.59 —
RTEF
33V
RTEF120 1.74 1.56 1.38 1.20 1.16 1.00 0.92 0.82 0.73 0.60 —
RTEF135 1.96 1.76 1.55 1.35 1.31 1.12 1.04 0.92 0.82 0.68 —
RTEF190 2.76 2.47 2.19 1.90 1.84 1.58 1.50 1.29 1.16 0.95 —
RUEF
30V
RUEF090 1.31 1.17 1.04 0.90 0.87 0.75 0.69 0.61 0.55 0.47 —
RUEF110 1.60 1.43 1.27 1.10 1.07 0.91 0.85 0.75 0.67 0.57 —
RUEF135 1.96 1.76 1.55 1.35 1.31 1.12 1.04 0.92 0.82 0.70 —
RUEF160 2.32 2.08 1.84 1.60 1.55 1.33 1.23 1.09 0.98 0.83 —
RUEF185 2.68 2.41 2.13 1.85 1.79 1.54 1.42 1.26 1.13 0.96 —
RUEF250 3.63 3.25 2.88 2.50 2.43 2.08 1.93 1.70 1.53 1.30 —
RUEF300 4.35 3.90 3.45 3.00 2.91 2.49 2.31 2.04 1.83 1.56 —
RUEF400 5.80 5.20 4.60 4.00 3.88 3.32 3.08 2.72 2.44 2.08 —
RUEF500 7.25 6.50 5.75 5.00 4.85 4.15 3.85 3.40 3.05 2.60 —
RUEF600 8.70 7.80 6.90 6.00 5.82 4.98 4.62 4.08 3.66 3.12 —
RUEF700 10.15 9.10 8.05 7.00 6.79 5.81 5.39 4.76 4.27 3.64 —
RUEF800 11.60 10.40 9.20 8.00 7.76 6.64 6.16 5.44 4.88 4.16 —
RUEF900 13.05 11.70 10.35 9.00 8.73 7.47 6.93 6.12 5.49 4.68 —
RHEF
30V - High Temperature
RHEF050 0.68 0.62 0.56 0.51 0.50 0.44 0.40 0.36 0.34 0.28 0.12
RHEF070 0.95 0.87 0.79 0.72 0.70 0.62 0.56 0.51 0.47 0.39 0.17
RHEF100 1.36 1.24 1.13 1.03 1.00 0.89 0.80 0.73 0.67 0.56 0.24
10 RUSBF
16V
RUSBF090 1.31 1.17 1.04 0.90 0.87 0.75 0.69 0.61 0.55 0.47 —
RUSBF110 1.60 1.43 1.27 1.10 1.07 1.00 0.92 0.75 0.67 0.57 —
RUSBF135 1.96 1.76 1.55 1.35 1.31 1.12 1.04 0.92 0.82 0.70 —
RUSBF160 2.32 2.08 1.84 1.60 1.55 1.33 1.23 1.09 0.98 0.83 —
RUSBF185 2.68 2.41 2.13 1.85 1.79 1.54 1.42 1.26 1.13 0.96 —
RUSBF250 3.63 3.25 2.88 2.50 2.43 2.08 1.93 1.70 1.53 1.30 —
RGEF
16V
RGEF250 3.7 3.3 3.0 2.6 2.50 2.2 2.0 1.8 1.6 1.2 —
RGEF300 4.4 4.0 3.6 3.1 3.00 2.6 2.4 2.1 1.9 1.4 —
RGEF400 5.9 5.3 4.8 4.1 4.00 3.5 3.2 2.8 2.5 1.9 —
RGEF500 7.3 6.6 6.0 5.2 5.00 4.4 4.0 3.6 3.1 2.4 —
RGEF600 8.8 8.0 7.2 6.2 6.00 5.2 4.8 4.2 3.8 2.8 —
RGEF700 10.3 9.3 8.4 7.3 7.00 6.2 5.6 5.0 4.4 3.3 —

Table R2

RGEF
16V
RGEF800 11.7 10.7 9.6 8.3 8.00 6.9 6.4 5.6 5.1 3.7 —
RGEF900 13.2 11.9 10.7 9.4 9.00 7.9 7.2 6.4 5.6 4.2 —
RGEF1000 14.7 13.3 12.0 10.3 10.00 8.7 8.0 7.0 6.3 4.7 —
RGEF1100 16.1 14.6 13.1 11.5 11.00 9.7 8.8 7.8 6.9 5.2 —
RGEF1200 17.6 16.0 14.4 12.4 12.00 10.4 9.6 8.4 7.6 5.6 —
RGEF1400 20.5 18.7 16.8 14.5 14.00 12.1 11.2 9.8 8.9 6.5 —
RHEF
RHEF200 2.71 2.49 2.26 2.06 2.00 1.77 1.60 1.46 1.34 1.11 0.49
RHEF300 4.07 3.74 3.41 3.09 3.00 2.65 2.40 2.21 2.00 1.66 0.74
RHEF400 5.57 5.11 4.65 4.22 4.00 3.62 3.29 3.01 2.73 2.27 1.01
RHEF450 6.10 5.60 5.10 4.60 4.50 4.00 3.60 3.30 3.00 2.50 1.10
RHEF550 7.47 6.86 6.24 5.66 5.50 4.85 4.41 4.04 3.66 3.05 1.36
RHEF600 8.20 7.50 6.80 6.20 6.00 5.30 4.90 4.40 4.00 3.30 1.50
RHEF650 8.80 8.10 7.40 6.70 6.50 5.70 5.30 4.80 4.30 3.60 1.60
RHEF700 9.51 8.73 7.95 7.20 7.00 6.17 5.61 5.15 4.66 3.88 1.73
RHEF750 10.20 9.40 8.60 7.70 7.50 6.60 6.10 5.60 5.00 4.10 1.90
RHEF800 10.87 9.98 9.08 8.23 8.00 7.06 6.41 5.88 5.33 4.43 1.97
RHEF900 12.21 11.19 10.16 9.26 9.00 7.97 7.20 6.56 6.04 5.01 2.19
RHEF1000 13.60 12.50 11.40 10.30 10.00 8.80 8.10 7.40 6.60 5.50 2.50
RHEF1100 14.94 13.72 12.49 11.31 11.00 9.70 8.82 8.09 7.32 6.09 2.71
RHEF1300 17.70 16.30 14.80 13.40 13.00 11.40 10.50 9.60 8.60 7.20 3.30
RHEF1400 19.01 17.46 15.89 14.40 14.00 12.35 11.22 10.29 9.32 7.76 3.45
RHEF1500 20.40 18.80 17.10 15.50 15.00 13.20 12.10 11.10 9.90 8.30 3.80
RUSBF
6V
RUSBF075 1.05 0.95 0.85 0.75 0.73 0.65 0.60 0.55 0.50 0.43 —
RUSBF120 1.69 1.52 1.36 1.20 1.16 1.04 0.96 0.88 0.80 0.68 —
RUSBF155 2.17 1.96 1.75 1.55 1.50 1.34 1.24 1.14 1.03 0.88 —
Figure R1-R5 Thermal Derating Curve for Radial-leaded Devices
RXEF and BBRF Figure R1
200
10
150
100
50
0
-40 -20 0 20 40 60 80

Figure R1-R5 Thermal Derating Curve for Radial-leaded Devices Cont’d
Figure R2
RKEF
200

150
100
50
0
-40 -20 0 20 40 60 80
A = RUSBF075, Figure R3
RUSBF120,
RUSBF155 200
B = RUEF,
% of Rated Hold and Trip Current
150 B
RTEF,
and all other RUSBF A
100
A
50
B
0
-40 -20 0 20 40 60 80
Figure R4
10 RHEF
200
150
100
50
0
-40 -20 0 20 40 60 80 100 120

Figure R1-R5 Thermal Derating Curve for Radial-leaded Devices Cont’d
Figure R5
RGEF
200

150
100
50
0
-40 -20 0 20 40 60 80
Table R3 Electrical Characteristics for Radial-leaded Devices
Part IH IT VMAX IMAX PD Typ Max. Time-to-trip RMIN RMAX R1MAX Lead Size
Number (A) (A) (V) (A) (W) (A) (s) (Ω) (Ω) (Ω) [mm2 (AWG)]
BBRF
99V
BBRF550 0.55 1.10 99 20 1.5 1.60 60 0.8 1.30 1.95 [0.520mm2 (20)]
RXEF
60V
RXEF005 0.05 0.10 60 40 0.22 0.25 5.0 7.3 11.10 20.00 [0.128mm2 (26)]
RXEF010 0.10 0.20 60 40 0.38 0.50 4.0 2.5 4.50 7.50 [0.205mm2 (24)]
RXEF017 0.17 0.34 60 40 0.48 0.85 3.0 3.3 5.21 8.00 [0.205mm2 (24)]
RXEF
72V
RXEF020 0.20 0.40 72 40 0.41 1.00 2.2 1.83 2.75 4.40 [0.205mm2 (24)]
RXEF025 0.25 0.50 72 40 0.45 1.25 2.5 1.25 1.95 3.00 [0.205mm2 (24)]
RXEF030 0.30 0.60 72 40 0.49 1.50 3.0 0.88 1.33 2.10 [0.205mm2 (24)]
RXEF040 0.40 0.80 72 40 0.56 2.00 3.8 0.55 0.86 1.29 [0.205mm2 (24)]
RXEF050 0.50 1.00 72 40 0.77 2.50 4.0 0.50 0.77 1.17 [0.205mm2 (24)]
RXEF065 0.65 1.30 72 40 0.88 3.25 5.3 0.31 0.48 0.72 [0.205mm2 (24)]
RXEF075 0.75 1.50 72 40 0.92 3.75 6.3 0.25 0.40 0.60 [0.205mm2 (24)]
RXEF090 0.90 1.80 72 40 0.99 4.50 7.2 0.20 0.31 0.47 [0.205mm2 (24)] 10
RXEF110 1.10 2.20 72 40 1.50 5.50 8.2 0.15 0.25 0.38 [0.520mm2 (20)]
RXEF135 1.35 2.70 72 40 1.70 6.75 9.6 0.12 0.19 0.30 [0.520mm2 (20)]
RXEF160 1.60 3.20 72 40 1.90 8.00 11.4 0.09 0.14 0.22 [0.520mm2 (20)]
RXEF185 1.85 3.70 72 40 2.10 9.25 12.6 0.08 0.12 0.19 [0.520mm2 (20)]
RXEF250 2.50 5.00 72 40 2.50 12.50 15.6 0.05 0.08 0.13 [0.520mm2 (20)]
RXEF300 3.00 6.00 72 40 2.80 15.00 19.8 0.04 0.06 0.10 [0.520mm2 (20)]
RXEF375 3.75 7.50 72 40 3.20 18.75 24.0 0.03 0.05 0.08 [0.520mm2 (20)]
RKEF
60V
RKEF050 0.50 1.00 60 40 1.00 8.00 0.8 0.320 0.529 0.900 [0.205mm2 (24)]
RKEF065 0.65 1.30 60 40 1.25 8.00 1.0 0.250 0.450 0.720 [0.205mm2 (24)]
RKEF075 0.75 1.50 60 40 1.40 8.00 1.5 0.200 0.390 0.640 [0.205mm2 (24)]
RKEF090 0.90 1.80 60 40 1.50 8.00 2.0 0.190 0.320 0.520 [0.205mm2 (24)]
RKEF110 1.10 2.20 60 40 2.20 8.00 3.0 0.170 0.280 0.470 [0.520mm2 (20)]
RKEF135 1.35 2.70 60 40 2.30 8.00 4.5 0.110 0.220 0.370 [0.520mm2 (20)]

Table R3 Electrical Characteristics for Radial-leaded Devices Cont’d
RKEF
60V
RKEF160 1.60 3.20 60 40 2.40 8.20 9.0 0.100 0.200 0.320 [0.520mm2 (20)]
RKEF185 1.85 3.70 60 40 2.60 9.25 12.6 0.060 0.152 0.250 [0.520mm2 (20)]
RKEF250 2.50 5.00 60 40 2.80 12.50 15.6 0.040 0.085 0.140 [0.520mm2 (20)]
RKEF300 3.00 6.00 60 40 3.20 15.00 19.8 0.030 0.050 0.080 [0.520mm2 (20)]
RKEF375 3.75 7.50 60 40 3.40 18.75 22.0 0.017 0.040 0.060 [0.520mm2 (20)]
RKEF400 4.00 8.00 60 40 3.70 20.00 24.0 0.014 0.038 0.060 [0.520mm2 (20)]
RKEF500 5.00 10.00 60 40 5.00 25.00 28.0 0.012 0.030 0.050 [0.520mm2 (20])
RTEF
33V
RTEF120 1.20 2.30 33 40 0.78 6.00 3.5 0.074 0.120 0.180 [0.205mm2 (24)]
RTEF135 1.35 2.50 33 40 0.84 6.75 4.5 0.059 0.100 0.143 [0.205mm2 (24)]
RTEF190 1.90 3.00 33 40 0.90 9.50 3.5 0.045 0.063 0.092 [0.205mm2 (24)]
RUEF
30V
RUEF090 0.90 1.80 30 100 0.60 4.50 5.9 0.070 0.120 0.22 [0.205mm2 (24)]
RUEF110 1.10 2.20 30 100 0.70 5.50 6.6 0.070 0.100 0.17 [0.205mm2 (24)]
RUEF135 1.35 2.70 30 100 0.80 6.75 7.3 0.040 0.080 0.13 [0.205mm2 (24)]
RUEF160 1.60 3.20 30 100 0.90 8.00 8.0 0.030 0.070 0.11 [0.205mm2 (24)]
RUEF185 1.85 3.70 30 100 1.00 9.25 8.7 0.030 0.060 0.09 [0.205mm2 (24)]
RUEF250 2.50 5.00 30 100 1.20 12.50 10.3 0.020 0.040 0.07 [0.205mm2 (24)]
RUEF300 3.00 6.00 30 100 2.00 15.00 10.8 0.020 0.050 0.08 [0.520mm2 (20)]
RUEF400 4.00 8.00 30 100 2.50 20.00 12.7 0.010 0.030 0.05 [0.520mm2 (20)]
RUEF500 5.00 10.00 30 100 3.00 25.00 14.5 0.010 0.030 0.05 [0.520mm2 (20)]
RUEF600 6.00 12.00 30 100 3.50 30.00 16.0 0.005 0.020 0.04 [0.520mm2 (20)]
RUEF700 7.00 14.00 30 100 3.80 35.00 17.5 0.005 0.020 0.03 [0.520mm2 (20)]
RUEF800 8.00 16.00 30 100 4.00 40.00 18.8 0.005 0.013 0.02 [0.520mm2 (20)]
RUEF900 9.00 18.00 30 100 4.20 45.00 20.0 0.005 0.010 0.02 [0.520mm2 (20)]
RHEF*
RHEF050 0.5 0.9 30 40 0.9 2.5 2.5 0.480 0.780 1.10 [0.205mm2 (24)]
RHEF070 0.7 1.4 30 40 1.4 3.5 3.2 0.300 0.540 0.80 [0.205mm2 (24)]
RHEF100 1.0 1.8 30 40 1.4 5.0 5.2 0.180 0.300 0.43 [0.205mm2 (24)]
RUSBF
16V
RUSBF090 0.90 1.8 16 40 0.6 8.0 1.2 0.070 0.120 0.180 [0.205mm2 (24)]
RUSBF110 1.10 2.2 16 40 0.7 8.0 2.3 0.050 0.095 0.140 [0.205mm2 (24)]
RUSBF135 1.35 2.7 16 40 0.8 8.0 4.5 0.040 0.074 0.112 [0.205mm2 (24)]
RUSBF160 1.60 3.2 16 40 0.9 8.0 9.0 0.030 0.061 0.110 [0.205mm2 (24)]
RUSBF185 1.85 3.7 16 40 1.0 8.0 10.0 0.030 0.051 0.090 [0.205mm2 (24)]
10 RUSBF250 2.50 5.0 16 40 1.2 8.0 40.0 0.020 0.036 0.060 [0.205mm2 (24)]
RGEF*
16V
RGEF250 2.5 4.7 16 100 1.0 12.5 5.0 0.0220 0.0350 0.0530 [0.205mm2 (24)]
RGEF300 3.0 5.1 16 100 2.3 15.0 1.0 0.0380 0.0645 0.0975 [0.520mm2 (20)]
RGEF400 4.0 6.8 16 100 2.4 20.0 1.7 0.0210 0.0390 0.0600 [0.520mm2 (20)]
RGEF500 5.0 8.5 16 100 2.6 25.0 2.0 0.0150 0.0240 0.0340 [0.520mm2 (20)]
RGEF600 6.0 10.2 16 100 2.8 30.0 3.3 0.0100 0.0190 0.0280 [0.520mm2 (20)]
RGEF700 7.0 11.9 16 100 3.0 35.0 3.5 0.0077 0.0131 0.0200 [0.520mm2 (20)]
RGEF800 8.0 13.6 16 100 3.0 40.0 5.0 0.0056 0.0110 0.0175 [0.520mm2 (20)]
RGEF900 9.0 15.3 16 100 3.3 45.0 5.5 0.0047 0.0091 0.0135 [0.520mm2 (20)]
RGEF1000 10.0 17.0 16 100 3.6 50.0 6.0 0.0040 0.0070 0.0102 [0.520mm2 (20)]
RGEF1100 11.0 18.7 16 100 3.7 55.0 7.0 0.0037 0.0060 0.0089 [0.520mm2 (20)]
RGEF1200 12.0 20.4 16 100 4.2 60.0 7.5 0.0033 0.0057 0.0086 [0.823mm2 (18)]
RGEF1400 14.0 23.8 16 100 4.6 70.0 9.0 0.0026 0.0043 0.0064 [0.823mm2 (18)]

Table R3 Electrical Characteristics for Radial-leaded Devices Cont’d
RHEF*
RHEF200 2.0 3.8 16 100 1.4 10.0 4.3 0.0450 0.07400 0.1100 [0.205mm2 (24)]
RHEF300 3.0 6.0 16 100 3.0 15.0 5.0 0.0330 0.05300 0.0790 [0.520mm2 (20)]
RHEF400 4.0 7.5 16 100 3.3 20.0 5.0 0.0240 0.04000 0.0600 [0.520mm2 (20)]
RHEF450 4.5 7.8 16 100 3.6 22.5 3.0 0.0220 0.03600 0.0540 [0.520mm2 (20)]
RHEF550 5.5 10.0 16 100 3.5 27.5 6.0 0.0150 0.02500 0.0370 [0.520mm2 (20)]
RHEF600 6.0 10.8 16 100 4.1 30.0 5.0 0.0130 0.02150 0.0320 [0.520mm2 (20)]
RHEF650 6.5 12.0 16 100 4.1 32.5 5.5 0.0110 0.01750 0.0260 [0.520mm2 (20)]
RHEF700 7.0 13.0 16 100 4.0 35.0 7.0 0.0100 0.01640 0.0250 [0.520mm2 (20)]
RHEF750 7.5 13.1 16 100 4.5 37.5 7.0 0.0094 0.01530 0.0220 [0.520mm2 (20)]
RHEF800 8.0 15.0 16 100 4.2 40.0 8.0 0.0080 0.01350 0.0200 [0.520mm2 (20)]
RHEF900 9.0 16.5 16 100 5.0 45.0 10.0 0.0074 0.01200 0.0170 [0.520mm2 (20)]
RHEF1000 10.0 18.5 16 100 5.3 50.0 9.0 0.0062 0.01050 0.0150 [0.520mm2 (20)]
RHEF1100 11.0 20.0 16 100 5.5 55.0 11.0 0.0055 0.00900 0.0130 [0.520mm2 (20)]
RHEF1300 13.0 24.0 16 100 6.9 65.0 13.0 0.0041 0.00690 0.0100 [0.823mm2 (18)]
RHEF1400 14.0 27.0 16 100 6.9 70.0 13.0 0.0030 0.00600 0.0090 [0.823mm2 (18)]
RHEF1500 15.0 28.0 16 100 7.0 75.0 20.0 0.0032 0.00613 0.0092 [0.823mm2 (18)]
RUSBF
6V
RUSBF075 0.75 1.30 6 40 0.3 8.0 0.4 0.110 0.1750 0.23 [0.205mm2 (24)]
RUSBF120 1.20 2.00 6 40 0.6 8.0 0.5 0.070 0.0975 0.14 [0.205mm2 (24)]
RUSBF155 1.55 2.65 6 40 0.6 7.8 2.2 0.040 0.0705 0.10 [0.205mm2 (24)]
Notes:
IH : Hold current: maximum current device will pass without interruption in 20°C still air.
IT : Trip current: minimum current that will switch the device from low resistance to high resistance in 20°C still air.
VMAX : Maximum continuous voltage device can withstand without damage at rated current.
IMAX : Maximum fault current device can withstand without damage at rated voltage.
PD : Power dissipated from device when in the tripped state in 20°C still air.
RMIN : Minimum resistance of device as supplied at 20°C unless otherwise specified.
RMAX : Maximum resistance of device as supplied at 20°C unless otherwise specified.
R1MAX : Maximum resistance of device when measured one hour post reflow (surface-mount device) or one hour post trip (radial-leaded device) at 20°C unless otherwise specified.
* Electrical characteristics determined at 25°C.
Figure R6-R14 Dimension Figures for Radial-leaded Devices
Figure R6 Figure R7 Figure R8

A E A E A E
B B
B
10
D D
D
C F
C F C F
CL to CL CL CL CL to CL CL CL CL to CL CL CL

A E A E A E
B
B B
D
D
D
C F C F C F
CL to CL CL CL CL to CL CL CL CL to CL CL CL

Figure R6-R14 Dimension Figures for Radial-leaded Devices Cont’d

A E
A
C
B
J
J E H
C F
CL to CL CL CL
Table R4 Dimensions for Radial-leaded Devices in Millimeters (Inches)
A B C D E F H J
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Typ. Typ. Typ. Figure
BBRF
99V
BBRF550 — 10.9 — 14.0 4.3 5.8 7.6 — — 3.6 — 1.37 1.2 R6, R13,
(0.43) (0.55) (0.17) (0.23) (0.3) (0.14) (0.054) (0.05) R14
RXEF
60V
RXEF005 — 8.0 — 8.3 4.3 5.8 7.6 — — 3.0 — 1.07 1.0 R7, R13,
(0.32) (0.33) (0.17) (0.23) (0.30) (0.12) (0.042) (0.04) R14
RXEF010 — 7.4 — 11.6 4.3 5.8 7.6 — — 3.0 — 1.07 1.0 R7, R13,
(0.29) (0.46) (0.17) (0.23) (0.30) (0.12) (0.042) (0.04) R14
RXEF017 — 7.4 — 12.7 4.3 5.8 7.6 — — 3.0 — 1.68 1.7 R7, R13,
(0.29) (0.50) (0.17) (0.23) (0.30) (0.12) (0.066) (0.07) R14
RXEF
72V
RXEF020 — 7.4 — 11.7 4.3 5.8 7.6 — — 3.0 — 1.17 1.0 R8, R13,
(0.29) (0.46) (0.17) (0.23) (0.30) (0.12) (0.046) (0.04) R14
RXEF025 — 7.4 — 12.7 4.3 5.8 7.6 — — 3.0 — 1.17 1.0 R8, R13,
(0.29) (0.50) (0.17) (0.23) (0.30) (0.12) (0.046) (0.04) R14
RXEF030 — 7.4 — 12.7 4.3 5.8 7.6 — — 3.0 — 1.17 1.0 R8, R13,
(0.29) (0.50) (0.17) (0.23) (0.30) (0.12) (0.046) (0.04) R14
RXEF040 — 7.6 — 13.5 4.3 5.8 7.6 — — 3.0 — 1.17 1.2 R8, R13,
(0.30) (0.53) (0.17) (0.23) (0.30) (0.12) (0.046) (0.05) R14
RXEF050 — 7.9 — 13.7 4.3 5.8 7.6 — — 3.0 — 1.17 1.2 R8, R13,
(0.31) (0.54) (0.17) (0.23) (0.30) (0.12) (0.046) (0.05) R14
RXEF065 — 9.4 — 14.5 4.3 5.8 7.6 — — 3.0 — 1.17 1.5 R8, R13,
(0.37) (0.57) (0.17) (0.23) (0.30) (0.12) (0.046) (0.06) R14
RXEF075 — 10.2 — 15.2 4.3 5.8 7.6 — — 3.0 — 1.17 1.5 R8, R13,
10 RXEF090 —
(0.40)
11.2 —
(0.60)
15.8
(0.17)
4.3
(0.23)
5.8
(0.30)
7.6 — —
(0.12)
3.0 —
(0.046)
1.17
(0.06)
1.5
R14
R8, R13,
(0.44) (0.62) (0.17) (0.23) (0.30) (0.12) (0.046) (0.06) R14
RXEF110 — 12.8 — 17.5 4.3 5.8 7.6 — — 3.0 — 1.37 1.2 R9, R13,
(0.50) (0.69) (0.17) (0.23) (0.30) (0.12) (0.054) (0.05) R14
RXEF135 — 14.5 — 19.1 4.3 5.8 7.6 — — 3.0 — 1.37 1.2 R9, R13,
(0.57) (0.75) (0.17) (0.23) (0.30) (0.12) (0.054) (0.05) R14
RXEF160 — 16.3 — 20.8 4.3 5.8 7.6 — — 3.0 — 1.37 1.5 R9, R13,
(0.64) (0.82) (0.17) (0.23) (0.30) (0.12) (0.054) (0.06) R14
RXEF185 — 17.5 — 22.4 4.3 5.8 7.6 — — 3.0 — 1.37 1.5 R9, R13,
(0.69) (0.88) (0.17) (0.23) (0.30) (0.12) (0.054) (0.06) R14
RXEF250 — 20.8 — 25.4 9.4 10.9 7.6 — — 3.0 — 1.37 1.7 R9, R13,
(0.82) (1.00) (0.37) (0.43) (0.30) (0.12) (0.054) (0.07) R14
RXEF300 — 23.9 — 28.6 9.4 10.9 7.6 — — 3.0 — 1.37 1.7 R9, R13,
(0.94) (1.13) (0.37) (0.43) (0.30) (0.12) (0.054) (0.07) R14
RXEF375 — 27.2 — 31.8 9.4 10.9 7.6 — — 3.0 — 1.37 1.7 R9, R13,
(1.07) (1.25) (0.37) (0.43) (0.30) (0.12) (0.054) (0.07) R14

Table R4 Dimensions for Radial-leaded Devices in Millimeters (Inches) Cont’d
A B C D E F H J
RKEF
60V
RKEF050 — 7.10 — 11.43 4.32 5.84 7.60 — — 3.56 — — — R10, R13,
(0.28) (0.45) (0.17) (0.23) (0.30) (0.14) R14
RKEF065 — 7.11 — 12.20 4.32 5.84 7.60 — — 3.56 — — — R10, R13,
(0.28) (0.48) (0.17) (0.23) (0.30) (0.14) R14
RKEF075 — 7.87 — 12.20 4.32 5.84 7.60 — — 3.56 — — — R10, R13,
(0.31) (0.48) (0.17) (0.23) (0.30) (0.14) R14
RKEF090 — 7.87 — 13.97 4.32 5.84 7.60 — — 3.56 — — — R10, R13,
(0.31) (0.55) (0.17) (0.23) (0.30) (0.14) R14
RKEF110 — 7.60 — 15.00 4.32 5.84 7.60 — — 4.10 — — — R10, R13,
(0.30) (0.59) (0.17) (0.23) (0.30) (0.16) R14
RKEF135 — 10.20 — 17.00 4.32 5.84 7.60 — — 3.81 — — — R11, R13,
(0.40) (0.67) (0.17) (0.23) (0.30) (0.15) R14
RKEF160 — 12.20 — 18.30 4.32 5.84 7.60 — — 3.81 — — — R11, R13,
(0.48) (0.72) (0.17) (0.23) (0.30) (0.15) R14
RKEF185 — 13.00 — 18.80 4.32 5.84 7.60 — — 3.81 — — — R11, R13,
(0.51) (0.74) (0.17) (0.23) (0.30) (0.15) R14
RKEF250 — 14.00 — 20.60 4.32 5.84 7.60 — — 3.00 — — — R11, R13,
(0.55) (0.81) (0.17) (0.23) (0.30) (0.12) R14
RKEF300 — 16.50 — 21.20 4.32 5.84 7.60 — — 3.00 — — — R11, R13,
(0.65) (0.83) (0.17) (0.23) (0.30) (0.12) R14
RKEF375 — 16.50 — 25.20 9.40 10.90 7.60 — — 3.00 — — — R11, R13,
(0.65) (0.99) (0.37) (0.43) (0.30) (0.12) R14
RKEF400 — 21.00 — 24.90 9.40 10.90 7.60 — — 3.00 — — — R11, R13,
(0.83) (0.98) (0.37) (0.43) (0.30) (0.12) R14
RKEF500 — 24.10 — 29.00 9.40 10.90 7.60 — — 3.00 — — — R11, R13,
(0.95) (1.14) (0.37) (0.43) (0.30) (0.12) R14
RTEF
33V
RTEF120 — 7.4 — 12.2 4.3 5.8 7.6 — — 3.0 — 0.89 0.8 R10, R13,
(0.29) (0.48) (0.17) (0.23) (0.30) (0.12) (0.035) (0.03) R14
RTEF135 — 7.4 — 14.2 4.3 5.8 7.6 — — 3.0 — 0.89 0.8 R10, R13,
(0.29) (0.56) (0.17) (0.23) (0.30) (0.12) (0.035) (0.03) R14
RTEF190 — 8.9 — 13.5 4.3 5.8 7.6 — — 3.0 — 0.89 1.0 R10, R13,
(0.35) (0.53) (0.17) (0.23) (0.30) (0.12) (0.035) (0.04) R14
RUEF
30V
RUEF090 — 7.4 — 12.2 4.3 5.8 7.6 — — 3.0 — 0.89 0.8 R10, R13,
(0.29) (0.48) (0.17) (0.23) (0.30) (0.12) (0.035) (0.03) R14
RUEF110 — 7.4 — 14.2 4.3 5.8 7.6 — — 3.0 — 0.89 0.8 R10, R13,
(0.29) (0.56) (0.17) (0.23) (0.30) (0.12) (0.035) (0.03) R14
RUEF135 — 8.9 — 13.5 4.3 5.8 7.6 — — 3.0 — 0.89 1.0 R10, R13,
(0.35) (0.53) (0.17) (0.23) (0.30) (0.12) (0.035) (0.04) R14
RUEF160 — 8.9 — 15.2 4.3 5.8 7.6 — — 3.0 — 0.89 1.0 R10, R13,
(0.35) (0.60) (0.17) (0.23) (0.30) (0.12) (0.035) (0.04) R14
RUEF185 — 10.2 — 15.7 4.3 5.8 7.6 — — 3.0 — 0.89 1.0 R10, R13,
RUEF250 —
(0.40)
11.4 —
(0.62)
18.3
(0.17)
4.3
(0.23)
5.8
(0.30)
7.6 — —
(0.12)
3.0 —
(0.035)
0.89
(0.04)
1.2
R14
R10, R13,
10
(0.45) (0.72) (0.17) (0.23) (0.30) (0.12) (0.035) (0.05) R14
RUEF300 — 11.4 — 16.5 4.3 5.8 7.6 — — 3.0 — 1.19 1.5 R11, R13,
(0.45) (0.65) (0.17) (0.23) (0.30) (0.12) (0.047) (0.06) R14
RUEF400 — 14.0 — 19.3 4.3 5.8 7.6 — — 3.0 — 1.19 1.7 R11, R13,
(0.55) (0.76) (0.17) (0.23) (0.30) (0.12) (0.047) (0.07) R14
RUEF500 — 14.0 — 24.1 9.4 10.9 7.6 — — 3.0 — 1.19 1.0 R11, R13,
(0.55) (0.95) (0.37) (0.43) (0.30) (0.12) (0.047) (0.04) R14
RUEF600 — 16.5 — 24.1 9.4 10.9 7.6 — — 3.0 — 1.19 1.0 R11, R13,
(0.65) (0.95) (0.37) (0.43) (0.30) (0.12) (0.047) (0.04) R14
RUEF700 — 19.1 — 25.9 9.4 10.9 7.6 — — 3.0 — 1.19 1.2 R11, R13,
(0.75) (1.02) (0.37) (0.43) (0.30) (0.12) (0.047) (0.05) R14
RUEF800 — 21.6 — 28.4 9.4 10.9 7.6 — — 3.0 — 1.19 1.5 R11, R13,
(0.85) (1.12) (0.37) (0.43) (0.30) (0.12) (0.047) (0.06) R14
RUEF900 — 24.1 — 29.0 9.4 10.9 7.6 — — 3.0 — 1.19 1.5 R11, R13,
(0.95) (1.14) (0.37) (0.43) (0.30) (0.12) (0.047) (0.06) R14

A B C D E F H J
Part Number Min. Max. Min. max. Min. Max. Min. Max. Min. Max. Typ. Typ. Typ. Figure
RHEF
RHEF050 — 7.4 — 12.7 4.3 5.8 7.6 — — 3.0 1.2 — — R8, R13,
(0.29) (0.50) (0.17) (0.23) (0.30) (0.12) (0.05) R14
RHEF070 — 6.9 — 10.8 4.3 5.8 7.6 — — 3.0 1.2 1.24 1.2 R10, R13,
(0.27) (0.43) (0.17) (0.23) (0.30) (0.12) (0.05) (0.049) (0.05) R14
RHEF100 — 9.7 — 13.6 4.3 5.8 7.6 — — 3.0 — — — R8, R13,
(0.38) (0.54) (0.17) (0.23) (0.30) (0.12) R14
RUSBF
16V
RUSBF090 — 7.4 — 12.2 4.3 5.8 7.6 — — 3.1 — 0.89 0.8 R10, R13,
(0.29) (0.48) (0.17) (0.23) (0.30) (0.12) (0.035) (0.03) R14
RUSBF110 — 7.4 — 14.2 4.3 5.8 7.6 — — 3.0 — 0.89 0.8 R10, R13,
(0.29) (0.56) (0.17) (0.23) (0.30) (0.12) (0.035) (0.03) R14
RUSBF135 — 8.9 — 13.5 4.3 5.8 7.6 — — 3.0 — 0.89 1.0 R10, R13,
(0.35) (0.53) (0.17) (0.23) (0.30) (0.12) (0.035) (0.04) R14
RUSBF160 — 8.9 — 15.2 4.3 5.8 7.6 — — 3.0 — 0.89 1.0 R10, R13,
(0.35) (0.60) (0.17) (0.23) (0.30) (0.12) (0.035) (0.04) R14
RUSBF185 — 10.2 — 15.7 4.3 5.8 7.6 — — 3.0 — 0.89 1.0 R10, R13,
(0.40) (0.62) (0.17) (0.23) (0.30) (0.12) (0.035) (0.04) R14
RUSBF250 — 11.4 — 18.3 4.3 5.8 7.6 — — 3.0 — 0.89 1.2 R10, R13,
(0.45) (0.72) (0.17) (0.23) (0.30) (0.12) (0.035) (0.05) R14
RGEF
16V
RGEF250 — 8.9 — 12.8 4.3 5.8 3.18 6.18 — 3.0 1.2 1.24 1.2 R10, R13,
(0.35) (0.50) (0.17) (0.23) (0.13) (0.24) (0.12) (0.05) (0.049) (0.05) R14
RGEF300 6.1 7.1 6.1 11.0 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 1.2 R11, R13,
(0.24) (0.28) (0.24) (0.43) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.05) R14
RGEF400 7.9 8.9 7.9 12.8 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 1.4 R11, R13,
(0.31) (0.35) (0.31) (0.50) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.06) R14
RGEF500 9.4 10.4 9.4 14.3 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 1.6 R11, R13,
(0.37) (0.41) (0.37) (0.56) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.06) R14
RGEF600 9.7 10.7 12.2 17.1 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 1.6 R11, R13,
(0.38) (0.42) (0.48) (0.67) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.06) R14
RGEF700 10.2 11.2 14.7 19.7 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 1.7 R11, R13,
(0.40) (0.44) (0.58) (0.78) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.07) R14
RGEF800 11.7 12.7 16.0 20.9 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 1.8 R11, R13,
(0.46) (0.50) (0.63) (0.82) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.07) R14
RGEF900 13.0 14.0 16.8 21.7 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 2.0 R11, R13,
(0.51) (0.55) (0.66) (0.85) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.08) R14
RGEF1000 15.5 16.5 21.1 25.2 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 2.0 R11, R13,
(0.61) (0.65) (0.83) (0.99) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.08) R14
RGEF1100 16.5 17.5 21.1 26.0 4.3 5.8 7.6 — 2.0 3.0 1.2 1.24 2.4 R11, R13,
(0.65) (0.69) (0.83) (1.02) (0.17) (0.23) (0.30) (0.08) (0.12) (0.05) (0.049) (0.09) R14
RGEF1200 16.4 17.5 22.6 28.0 9.4 10.9 7.6 — 2.3 3.5 1.4 1.45 1.5 R11, R13,
(0.65) (0.69) (0.89) (1.10) (0.37) (0.43) (0.30) (0.09) (0.14) (0.06) (0.057) (0.06) R14
RGEF1400 22.4 23.5 22.6 27.9 9.4 10.9 7.6 — 2.3 3.5 1.4 1.45 1.9 R11, R13,
10 RHEF
(0.88) (0.925) (0.89) (1.10) (0.37) (0.43) (0.30) (0.09) (0.14) (0.06) (0.057) (0.08) R14

RHEF200 — 9.4 — 14.4 4.3 5.8 7.6 — — 3.1 — — — R8, R13,
(0.37) (0.57) (0.17) (0.23) (0.30) (0.12) R14
RHEF300 — 8.8 — 13.8 4.3 5.8 7.6 — — 3.0 1.2 — — R12, R13,
(0.35) (0.55) (0.17) (0.23) (0.30) (0.12) (0.05) R14
RHEF400 — 10.0 — 15.0 4.3 5.8 7.6 — — 3.0 1.2 1.24 1.6 R12, R13,
(0.39) (0.59) (0.17) (0.23) (0.30) (0.12) (0.05) (0.049) (0.06) R14
RHEF450 — 10.4 — 15.6 4.3 5.8 7.6 — — 3.0 1.2 1.24 1.6 R12, R13,
(0.41) (0.61) (0.17) (0.23) (0.30) (0.12) (0.05) (0.049) (0.06) R14
RHEF550 — 11.2 — 18.9 4.3 5.8 7.6 — — 3.0 1.2 — — R12, R13,
(0.44) (0.74) (0.17) (0.23) (0.30) (0.12) (0.05) R14
RHEF600 — 11.2 — 21.0 4.3 5.8 7.6 — — 3.0 1.2 1.24 1.7 R12, R13,
(0.44) (0.83) (0.17) (0.23) (0.30) (0.12) (0.05) (0.049) (0.067) R14
RHEF650 — 12.7 — 22.2 4.3 5.8 7.6 — — 3.0 1.2 1.24 1.8 R12, R13,
(0.50) (0.88) (0.17) (0.23) (0.30) (0.12) (0.05) (0.049) (0.07) R14

A B C D E F H J
RHEF
RHEF700 — 14.0 — 21.9 4.3 5.8 7.6 — — 3.0 1.2 — — R12, R13,
(0.55) (0.86) (0.17) (0.23) (0.30) (0.12) (0.05) R14
RHEF750 — 14.0 — 23.5 4.3 5.8 7.6 — — 3.0 1.2 1.24 2.0 R12, R13,
(0.55) (0.93) (0.17) (0.23) (0.30) (0.12) (0.05) (0.049) (0.08) R14
RHEF800 — 16.5 — 22.5 4.3 5.8 7.6 — — 3.0 1.2 — — R12, R13,
(0.65) (0.88) (0.17) (0.23) (0.30) (0.12) (0.05) R14
RHEF900 — 16.5 — 25.7 4.3 5.8 7.6 — — 3.0 1.2 — — R12, R13,
(0.65) (1.01) (0.17) (0.23) (0.30) (0.12) (0.05) R14
RHEF1000 — 17.5 — 26.5 9.4 10.9 7.6 — — 3.0 1.2 1.24 1.5 R12, R13,
(0.69) (1.04) (0.37) (0.43) (0.30) (0.12) (0.05) (0.049) (0.06) R14
RHEF1100 — 21.0 — 26.1 9.4 10.9 7.6 — — 3.0 1.2 — — R12, R13,
(0.83) (1.03) (0.37) (0.43) (0.30) (0.12) (0.05) R14
RHEF1300 — 23.5 — 28.7 9.4 10.9 7.6 — — 3.6 1.4 1.45 1.9 R12, R13,
(0.925) (1.13) (0.37) (0.43) (0.30) (0.14) (0.06) (0.057) (0.084) R14
RHEF1400 — 23.5 — 28.6 9.4 10.9 7.6 — — 3.6 1.4 — — R12, R13,
(0.925) (1.13) (0.37) (0.43) (0.30) (0.14) (0.06) R14
RHEF1500 — 23.5 — 28.7 9.4 10.9 7.6 — — 3.6 1.4 1.45 1.9 R12, R13,
(0.925) (1.13) (0.37) (0.43) (0.30) (0.14) (0.06) (0.057) (0.084) R14
RUSBF
6V
RUSBF075 — 6.9 — 11.4 4.3 5.9 7.6 — — 3.1 — 0.91 1.0 R8, R13,
(0.27) (0.45) (0.17) (0.23) (0.30) (0.12) (0.036) (0.04) R14
RUSBF120 — 6.9 — 11.7 4.3 5.9 7.6 — — 3.1 — 0.91 1.0 R8, R13,
(0.27) (0.46) (0.17) (0.23) (0.30) (0.12) (0.036) (0.04) R14
RUSBF155 — 6.9 — 11.7 4.3 5.9 7.6 — — 3.1 — 0.91 1.0 R8, R13,
(0.27) (0.46) (0.17) (0.23) (0.30) (0.12) (0.036) (0.04) R14
Figure R15-R21 Typical Time-to-trip Curves at 20°C for Radial-leaded Devices
BBRF Figure R15

A = BBRF550 1000
A B C D
RTEF
B = RTEF120 100
C = RTEF135
D = RTEF190
Time-to-trip (s)
10
10
1
0.1
D
A C
0.01
B
0.1 1 10 100
Fault Current (A)

Figure R15-R21 Typical Time-to-trip Curves at 20°C for Radial-leaded Devices Cont’d
RXEF Figure R16

A = RXEF005 J = RXEF075 1000
B C D E F G H I J K L M NO P Q R
B = RXEF010 K = RXEF090
C = RXEF017 L = RXEF110
100
D = RXEF020 M = RXEF135
E = RXEF025 N = RXEF160 A
10
F = RXEF030 O = RXEF185
Time-to-trip (s)
G = RXEF040 P = RXEF250
R
1
H = RXEF050 Q = RXEF300 Q
I = RXEF065 R = RXEF375 P
0.1 O
N
M
L
0.01 K
J
A I
0.001 H
0.1 1 B 10 C D E F G 100
Fault Current (A)
RKEF Figure R17

A = RKEF050 J = RKEF300 100
G I L M
H J
B = RKEF065 K = RKEF375 E F K
C = RKEF075 L = RKEF400 A D
B C
D = RKEF090 M = RKEF500
10
E = RKEF110
F = RKEF135
Time-to-trip (s)
M
G = RKEF160
1 L
H = RKEF185 K
I = RKEF250 J
I
0.1
H
G
F
0.01
1 10 A BCD E 100
Fault Current (A)
RUEF Figure R18
10 A =
B =
RUEF090
RUEF110
H
I
=
=
RUEF400
RUEF500
100
A
B C D E F G K L M
H I J
C = RUEF135 J = RUEF600
D = RUEF160 K = RUEF700
10
E = RUEF185 L = RUEF800
F = RUEF250 M = RUEF900
Time-to-trip (s)
G = RUEF300
1
M
L
K
J
I
0.1
H
G
F
E
D
0.01
1 10 A B C 100
Fault Current (A)

Figure R15-R21 Typical Time-to-trip Curves at 20°C for Radial-leaded Devices Cont’d
RGEF (data at 25°C) Figure R19

A = RGEF250 1000 A B C D E F GH I J K L
B = RGEF300
C = RGEF400 100
D = RGEF500
E = RGEF600
10
F = RGEF700
Time-to-trip (s)
G = RGEF800 L
1 K
H = RGEF900 J
I
I = RGEF1000 H
A G
0.1
J = RGEF1100 F
K = RGEF1200 E
D
L = RGEF1400 0.01
C
B
0.001
1 10 100
Fault Current (A)
RHEF (data at 25°C) Figure R20

A = RHEF050 K = RHEF700 C D E FG H I JKLM N O P QR S
1000
B = RHEF070 L = RHEF750
C = RHEF100 M = RHEF800
D = RHEF200 N = RHEF900 100
B
E = RHEF300 O = RHEF1000
F = RHEF400 P = RHEF1100
Time-to-trip (s)
10
G = RHEF450 Q = RHEF1300
S
H = RHEF550 R = RHEF1400 R
I = RHEF600 S = RHEF1500 PQ
1
O
J = RHEF650 N
M
L
K
0.1 J
I
H
G
0.01 F
1 10 A B C D E 100
Fault Current (A)
RUSBF Figure R21

A = RUSBF075
B = RUSBF090
100
C D E FG H I
10
B
C = RUSBF110 A
D = RUSBF120 10
E = RUSBF135
F = RUSBF155
Time-to-trip (s)
1
G = RUSBF160
I
H = RUSBF185 H
I = RUSBF250 0.1
G
F
E
0.01 D
C
A B
0.001
1 10 100
Fault Current (A)

Table R5 Physical Characteristics and Environmental Specifications for Radial-leaded Devices
BBRF
Lead material Tin-plated copper, 0.52mm2 (20AWG), ø0.81mm (0.032in.)

Soldering characteristics Solderability per ANSI/J-STD-002 Category 3
Solder heat withstand per IEC-STD 68-2-20, Test Tb, Method 1A, Condition B, can withstand 10 seconds at 260°C ±5°C
Insulating material Cured, flame-retardant epoxy polymer; meets UL 94V-0
Operation temperature -40°C~85°C
Note: Devices are not designed to be placed through a reflow process.
Test Conditions Resistance Change
Passive aging 70°C, 1000 hours ±5%
85°C, 1000 hours ±5%
Humidity aging 85°C, 85%RH, 1000 hours ±5%
Thermal shock 85°C, -40°C (10 times) ±5%
Solvent resistance MIL-STD-202, Method 215F No change
RXEF
Lead material RXEF005 : Tin-plated nickel-copper alloy, 0.128mm2 (26AWG), ø0.40mm (0.016in.)
RXEF010 : Tin-plated nickel-copper alloy, 0.205mm2 (24AWG), ø0.51mm (0.020in.)
RXEF017 to 040 : Tin-plated copper-clad steel, 0.205mm2 (24AWG), ø0.51mm (0.020in.)
RXEF050 to 090 : Tin-plated copper, 0.205mm2 (24AWG), ø0.51mm (0.020in.)
RXEF110 to 375 : Tin-plated copper, 0.52mm2 (20AWG), ø0.81mm (0.032in.)
RXEF005, RXEF010 meet ANSI/J-STD-002 Category 1
Solder heat withstand RXEF005- RXEF025: per IEC-STD 68-2-20, Test Tb, Method 1a, condition a;
can withstand 5 seconds at 260°C ±5°C
All other sizes: per IEC-STD 68-2-20, Test Tb, Method 1a, condition b;
Passive aging -40°C, 1000 hours ±5%
85°C, 1000 hours ±5%
10 Solvent resistance MIL-STD-202, Method 215F No change
RKEF
Lead material RKEF050 to 090 : Tin-plated copper, 0.205mm2 (24AWG), ø0.51mm (0.020in.)
RKEF110 to 500 : Tin-plated copper, 0.52mm2 (20AWG), ø0.81mm (0.032in.)
Solder heat withstand RKEF050-RKEF185 : per IEC-STD 68-2-20, Test Tb, Method 1a, condition a;
All other sizes: per IEC-STD 68-2-20, Test Tb, Method 1a, condition b;
RKEF can withstand 10 seconds at 260°C ±5°C

Table R5 Physical Characteristics and Environmental Specifications for Radial-leaded Devices Cont’d
RKEF
85°C, 1000 hours ±5%
RTEF
Lead material Tin-plated copper-clad steel, 0.205mm2 (24AWG), ø0.51mm (0.020in.)

Solder heat withstand per IEC-STD 68-2-20, Test Tb, Method 1A, Condition B; can withstand 10 seconds at 260°C ±5°C
85°C, 1000 hours ±5%
RUEF
Lead material RUEF090 to RUEF250: Tin-plated copper-clad steel, 0.205mm2 (24AWG)

RUEF300 to RUEF900: Tin-plated copper, 0.52mm2 (20AWG), ø0.81mm (0.032in.)
Solder heat withstand per IEC-STD 68-2-20, Test Tb, Method1A, Condition B, can withstand 10 seconds at 260°C ±5°C
Humidity aging
85°C, 1000 hours
85°C, 85%RH, 1000 hours
±5%
±5%
10
RUSBF
Lead material RUSBF075: Tin-plated nickel-copper alloy, 0.205mm2 (24AWG), ø0.51mm/0.020in.

RUSBF090 to RUSBF250: Tin-plated copper clad-steel, 0.205mm2 (24AWG), ø0.51mm/0.020in.
Soldering characteristics Solderability per ANSI/J-STD-002 Category 3 except
RUSBF075 meet ANSI/J-STD-002 Category 1
Solder heat withstand RUSBF120: per IEC-STD 68-2-20, Test Tb, Method 1A, Condition A; can withstand 5 seconds at 260°C ±5°C
All others: per IEC-STD 68-2-20, Test Tb, Method 1A, Condition B; can withstand 10 seconds at 260°C ±5°C

Table R5 Physical Characteristics and Environmental Specifications for Radial-leaded Devices Cont’d
RUSBF
85°C, 1000 hours ±5%
RGEF
Lead material RGEF250: Tin-plated copper-clad steel, 0.205mm2 (24AWG), ø0.51mm/0.020in.

RGEF300 to RGEF1100 : Tin-plated copper, 0.52mm2 (20AWG), ø0.81mm/0.032in.
RGEF1200 to RGEF1400 : Tin-plated copper, 0.82mm2 (18AWG), ø1.0mm/0.04in.
Solder heat withstand RGEF250 and RGEF400: per IEC 68-2-20, Test Tb, Method 1a, condition a;
RGEF500 to RGEF1400: per IEC 68-2-20, Test Tb, Method 1a, condition b;
85°C, 1000 hours ±5%
RHEF
Lead material RHEF050 to RHEF200 : Tin-plated copper clad steel, 0.205mm2 (24AWG), ø0.51mm/0.020in.
RHEF300 to RHEF1100 : Tin-plated copper, 0.52mm2 (20AWG), ø0.81mm/0.032in.
RHEF1300 to RHEF1500 : Tin-plated copper, 0.82mm2 (18AWG), ø1.0mm/0.04in.
Solder heat withstand per IEC 68-2-20, Test Tb, Method 1A, Condition B; can withstand 10 seconds at 260°C ±5°C
10 Note: Devices are not designed to be placed through a reflow process.
85°C, 1000 hours ±5%
Storage Conditions for Radial-leaded Devices
Storage conditions 40°C max., 70% RH max.; devices should remain in original sealed bags prior to use.
Devices may not meet specificed values if these storage conditions are exceeded.
Note: For the TR devices series, see the telecommunications and networking devices section.

Table R6 Packaging and Marking Information for Radial-leaded Devices
Bag Tape & Reel Ammo Pack Standard Package

Part Number Quantity Quantity Quantity Quantity Part Marking Agency Recognition
BBRF
99V
BBRF550 500 — — 10,000 BF550 UL, CSA
BBRF550-2 — 1,500 — 7,500 BF550 UL, CSA
RXEF
60V
RXEF005 500 — — 10,000 — UL, CSA, TÜV
RXEF005-2 — 3,000 — 15,000 — UL, CSA, TÜV
RXEF005-AP — — 2,000 10,000 — UL, CSA, TÜV
RXEF010 500 — — 10,000 XF010 UL, CSA, TÜV
RXEF010-2 — 3,000 — 15,000 XF010 UL, CSA, TÜV
RXEF010-AP — — 2,000 10,000 XF010 UL, CSA, TÜV
RXEF017 500 — — 10,000 XF017 UL, CSA, TÜV
RXEF017-2 — 2,500 — 12,500 XF017 UL, CSA, TÜV
RXEF
72V
RXEF020 500 — — 10,000 XF020 UL, CSA, TÜV
RXEF020-2 — 3,000 — 15,000 XF020 UL, CSA, TÜV
RXEF025 500 — — 10,000 XF025 UL, CSA, TÜV
RXEF025-2 — 3,000 — 15,000 XF025 UL, CSA, TÜV
RXEF030 500 — — 10,000 XF030 UL, CSA, TÜV
RXEF030-2 — 3,000 — 15,000 XF030 UL, CSA, TÜV
RXEF040 500 — — 10,000 XF040 UL, CSA, TÜV
RXEF040-2 — 3,000 — 15,000 XF040 UL, CSA, TÜV
RXEF050 500 — — 10,000 XF050 UL, CSA, TÜV
RXEF050-2 — 3,000 — 15,000 XF050 UL, CSA, TÜV
RXEF065 500 — — 10,000 XF065 UL, CSA, TÜV
RXEF065-2 — 3,000 — 15,000 XF065 UL, CSA, TÜV
RXEF075 500 — — 10,000 XF075 UL, CSA, TÜV
RXEF075-2 — 3,000 — 15,000 XF075 UL, CSA, TÜV
RXEF090 500 — — 10,000 XF090 UL, CSA, TÜV
RXEF090-2 — 3,000 — 15,000 XF090 UL, CSA, TÜV
RXEF090-AP — — 2,000 10,000 XF090 UL, CSA, TÜV 10
RXEF110 500 — — 10,000 XF110 UL, CSA, TÜV
RXEF110-2 — 1,500 — 7,500 XF110 UL, CSA, TÜV
RXEF135 500 — — 10,000 XF135 UL, CSA, TÜV
RXEF135-2 — 1,500 — 7,500 XF135 UL, CSA, TÜV
RXEF160 500 — — 10,000 XF160 UL, CSA, TÜV
RXEF160-2 — 1,500 — 7,500 XF160 UL, CSA, TÜV
RXEF185 500 — — 10,000 XF185 UL, CSA, TÜV
RXEF185-2 — 1,500 — 7,500 XF185 UL, CSA, TÜV

Table R6 Packaging and Marking Information for Radial-leaded Devices Cont’d

RXEF
72V
RXEF250 250 — — 5,000 XF250 UL, CSA, TÜV
RXEF250-2 — 1,000 — 5,000 XF250 UL, CSA, TÜV
RXEF300 250 — — 5,000 XF300 UL, CSA, TÜV
RXEF300-2 — 1,000 — 5,000 XF300 UL, CSA, TÜV
RXEF375 250 — — 5,000 XF375 UL, CSA, TÜV
RKEF
60V
RKEF050 500 — — 10,000 KF050 UL, CSA, TÜV
RKEF065 500 — — 10,000 KF065 UL, CSA, TÜV
RKEF075 500 — — 10,000 KF075 UL, CSA, TÜV
RKEF090 500 — — 10,000 KF090 UL, CSA, TÜV
RKEF110 500 — — 10,000 KF110 UL, CSA, TÜV
RKEF135 500 — — 10,000 KF135 UL, CSA, TÜV
RKEF160 500 — — 10,000 KF160 UL, CSA, TÜV
RKEF185 500 — — 10,000 KF185 UL, CSA, TÜV
RKEF250 500 — — 10,000 KF250 UL, CSA, TÜV
RKEF300 250 — — 5,000 KF300 UL, CSA, TÜV
RKEF375 250 — — 5,000 KF375 UL, CSA, TÜV
RKEF400 250 — — 5,000 KF400 UL, CSA, TÜV
RKEF500 250 — — 5,000 KF500 UL, CSA, TÜV
RTEF
33V
RTEF120 500 — — 10,000 TF120 UL, CSA, TÜV
RTEF120-2 — 3,000 — 15,000 TF120 UL, CSA, TÜV
RTEF120-AP — — 2,000 10,000 TF120 UL, CSA, TÜV
RTEF135 500 — — 10,000 TF135 UL, CSA, TÜV
RTEF135-2 — 3,000 — 15,000 TF135 UL, CSA, TÜV
RTEF190 500 — — 10,000 TF190 UL, CSA, TÜV
RTEF190-2 — 3,000 — 15,000 TF190 UL, CSA, TÜV
RUEF
30V
RUEF090 500 — — 10,000 UF090 UL, CSA, TÜV, CQC
RUEF090-2 — 3,000 — 15,000 UF090 UL, CSA, TÜV, CQC
RUEF090-AP — — 2,000 10,000 UF090 UL, CSA, TÜV, CQC
10 RUEF110 500 — — 10,000 UF110 UL, CSA, TÜV, CQC



RUEF
30V
RHEF
RHEF050 500 — — 10,000 HF0.5 UL, CSA, TÜV
RHEF050-2 — 2,500 — 12,500 HF0.7 UL, CSA, TÜV
RHEF070 500 — — 10,000 HF0.7 UL, CSA, TÜV
RHEF070-2 — 2,500 — 12,500 HF0.7 UL, CSA, TÜV
RHEF100 500 — — 10,000 HF1.0 UL, CSA, TÜV
RHEF100-2 — 2,500 — 12,500 HF1.0 UL, CSA, TÜV
RUSBF
16V
RUSBF090 500 — — 10,000 RF090 UL, CSA, TÜV
RUSBF090-2 — 3,000 — 15,000 RF090 UL, CSA, TÜV
RUSBF090-AP — — 2,000 10,000 RF090 UL, CSA, TÜV
RUSBF135-2
RUSBF135-AP
—
—
3,000
—
—
2,000
15,000
10,000
RF135
RF135
UL, CSA, TÜV
UL, CSA, TÜV
10
RGEF
16V
RGEF250 500 — — 10,000 GF250 UL, CSA, TÜV
RGEF250-2 — 3,000 — 15,000 GF250 UL, CSA, TÜV
RGEF250-AP — — 2,000 10,000 GF250 UL, CSA, TÜV


RGEF
16V
RGEF300 500 — — 10,000 GF300 UL, CSA, TÜV
RGEF300-2 — 2,500 — 12,500 GF300 UL, CSA, TÜV
RGEF400 500 — — 10,000 GF400 UL, CSA, TÜV
RGEF400-2 — 2,500 — 12,500 GF400 UL, CSA, TÜV
RGEF500 500 — — 10,000 GF500 UL, CSA, TÜV
RGEF500-2 — 2,000 — 10,000 GF500 UL, CSA, TÜV
RGEF600 500 — — 10,000 GF600 UL, CSA, TÜV
RGEF600-2 — 2,000 — 10,000 GF600 UL, CSA, TÜV
RGEF700 500 — — 10,000 GF700 UL, CSA, TÜV
RGEF700-2 — 1,500 — 7,500 GF700 UL, CSA, TÜV
RGEF800 500 — — 10,000 GF800 UL, CSA, TÜV
RGEF800-2 — 1,000 — 5,000 GF800 UL, CSA, TÜV
RGEF900 500 — — 10,000 GF900 UL, CSA, TÜV
RGEF900-2 — 1,000 — 5,000 GF900 UL, CSA, TÜV
RGEF1000 250 — — 5,000 GF1000 UL, CSA, TÜV
RGEF1000-2 — 1,000 — 5,000 GF1000 UL, CSA, TÜV
RGEF1100 250 — — 5,000 GF1100 UL, CSA, TÜV
RGEF1100-2 — 1,000 — 5,000 GF1100 UL, CSA, TÜV
RGEF1200 250 — — 5,000 GF1200 UL, CSA, TÜV
RGEF1200-2 — 1,000 — 5,000 GF1200 UL, CSA, TÜV
RGEF1400 250 — — 5,000 GF1400 UL, CSA, TÜV
RGEF1400-2 — 1,000 — 5,000 GF1400 UL, CSA, TÜV
RHEF
RHEF200 500 — — 10,000 HF2.0 UL, CSA, TÜV
RHEF200-2 — 2,500 — 12,500 HF2.0 UL, CSA, TÜV
RHEF200-AP — — 2,500 12,500 HF2.0 UL, CSA, TÜV
10 RHEF300 500 — — 10,000 HF3 UL, CSA, TÜV
RHEF300-2 — 2,000 — 10,000 HF3 UL, CSA, TÜV
RHEF300-AP — — 2,000 10,000 HF3 UL, CSA, TÜV
RHEF400 500 — — 10,000 HF4 UL, CSA, TÜV
RHEF400-2 — 1,500 — 7,500 HF4 UL, CSA, TÜV
RHEF450 500 — — 10,000 HF4.5 UL, CSA, TÜV
RHEF450-2 — 1,500 — 7,500 HF4.5 UL, CSA, TÜV
RHEF550 500 — — 10,000 HF5.5 UL, CSA, TÜV
RHEF550-2 — 2,000 — 10,000 HF5.5 UL, CSA, TÜV
RHEF600 500 — — 10,000 HF6 UL, CSA, TÜV
RHEF600-2 — 1,500 — 7,500 HF6 UL, CSA, TÜV


RHEF
RHEF650 500 — — 10,000 HF6.5 UL, CSA, TÜV
RHEF650-2 — 1,500 — 7,500 HF6.5 UL, CSA, TÜV
RHEF700 500 — — 10,000 HF7 UL, CSA, TÜV
RHEF700-2 — 1,500 — 7,500 HF7 UL, CSA, TÜV
RHEF750 500 — — 10,000 HF7.5 UL, CSA, TÜV
RHEF750-2 — 1,000 — 5,000 HF7.5 UL, CSA, TÜV
RHEF800 500 — — 10,000 HF8 UL, CSA, TÜV
RHEF800-2 — 1,000 — 5,000 HF8 UL, CSA, TÜV
RHEF900 250 — — 5,000 HF9 UL, CSA, TÜV
RHEF900-2 — 1,000 — 5,000 HF9 UL, CSA, TÜV
RHEF1000 250 — — 5,000 HF10 UL, CSA, TÜV
RHEF1000-2 — 1,000 — 5,000 HF10 UL, CSA, TÜV
RHEF1100 250 — — 5,000 HF11 UL, CSA, TÜV
RHEF1100-2 — 1,000 — 5,000 HF11 UL, CSA, TÜV
RHEF1300 250 — — 5,000 HF13 UL, CSA, TÜV
RHEF1300-2 — 1,000 — 5,000 HF13 UL, CSA, TÜV
RHEF1400 250 — — 5,000 HF14 UL, CSA, TÜV
RHEF1400-2 — 1,000 — 5,000 HF14 UL, CSA, TÜV
RHEF1500 250 — — 5,000 HF15 UL, CSA, TÜV
RHEF1500-2 — 1,000 — 5,000 HF15 UL, CSA, TÜV
RUSBF
6V
10
Agency Recognitions for Radial-leaded Devices
UL File # E74889
CSA File # CA78165
TÜV Certificate number available on request (per IEC 60730-1).

Table R7 Tape and Reel Specifications for Radial-leaded Devices
RXEF, BBRF and RKEF devices are available in tape and reel packaging per EIA468-B/IEC60286-2 standards.
See Figures R22 and R23 for details.

Carrier tape width W 18 -0.5/+1.0
Hold-down tape width W4 11 Minimum
Top distance between tape edges W6 3 Maximum
Sprocket hole position W5 9 -0.5/+0.75
Sprocket hole diameter D0 4 ± 0.2
Abscissa to plane (straight lead) (RXEF110 to RXEF300, RKEF135 to RKEF500) H 18.5 ± 2.5
Abscissa to plane (kinked lead) (RXEF010 to RXEF090, BBRF550, RKEF050 to RKEF110) H0 16.0 ± 0.5
Abscissa to top (RXEF010 to RXEF090, BBRF550, RKEF050 to RKEF185) H1 32.2 Maximum
Abscissa to top* (RXEF110 to RXEF300, RKEF250 to RKEF500) H1 47.5 Maximum
Overall width with lead protrusion (RXEF010 to RXEF090, BBRF550, RKEF050 to RKEF185) C1 43.2 Maximum
Overall width with lead protrusion* (RXEF110 to RXEF300, RKEF250 to RKEF500) C1 58 Maximum
Overall width without lead protrusion (RXEF010 to RXEF090, BBRF550, RKEF050 to RKEF185) C2 42.5 Maximum
Overall width without lead protrusion* (RXEF110 to RXEF300, RKEF250 to RKEF500) C2 57 Maximum
Lead protrusion L1 1.0 Maximum
Protrusion of cut-out L 11.0 Maximum
Protrusion beyond hold-down tape I2 Not specified —
Sprocket hole pitch P0 12.7 ± 0.3
Device pitch (RXEF010 to RXEF090, BBRF550, RKEF050 to RKEF185) — 12.7 ± 0.3
Device pitch (RXEF110 to RXEF300, RKEF250 to RKEF500) — 25.4 ± 0.61
Pitch tolerance — 20 consecutive ±1
Tape thickness t 0.9 Maximum
Overall tape and lead thickness (RXEF010 to RXEF090, RKEF050 to RKEF185) t1 1.5 Maximum
Overall tape and lead thickness (RXEF110 to RXEF300, BBRF550, RKEF250 to RKEF500) t1 2.3 Maximum
Splice sprocket hole alignment — 0 ± 0.3
Body lateral deviation ⌬h 0 ± 1.0
Body tape plane deviation ⌬p 0 ± 1.3
Ordinate to adjacent component lead (RXEF010 to RXEF185, BBRF550, RKEF050 to RKEF300) P1 3.81 ± 0.7
Ordinate to adjacent component lead (RXEF250 to RXEF300, RKEF375 to RKEF500) P1 7.62 ± 0.7
Lead spacing* (RXEF010 to RXEF185, BBRF550, RKEF050 to RKEF300) F 5.05 ± 0.75
Lead spacing* (RXEF250 to RXEF300, RKEF375 to RKEF500) F 10.15 ± 0.75
Reel width (RXEF010 to RXEF090, RKEF050 to RKEF185) w2 56.0 Maximum
Reel width* (RXEF110 to RXEF300, RKEF250 to RKEF500) w2 63.5 Maximum
Reel diameter a 370.0 Maximum
Space between flanges* (RXEF010 to RXEF090, RKEF050 to RKEF185) w1 48.00 Maximum
Space between flanges* (RXEF110 to RXEF300, RKEF250 to RKEF500) w1 55.00 Maximum
Arbor hold diameter c 26.0 ± 12.0
Core diameter* n 91.0 Maximum
Box — 64/372/362 Maximum
10 Consecutive missing places — None —
Empty places per reel — 0.1% Maximum
*Differs from EIA specification.

Table R7 Tape and Reel Specifications for Radial-leaded Devices Cont’d
RUEF, RTEF and RUSBF devices are available in tape and reel packaging per EIA468–B/IEC60286–2 standards.

Abscissa to plane (straight lead)* (RUEF300 to RUEF900) H 18.5 ± 2.5
Abscissa to plane (kinked lead) (RUSBF075 to RUSBF250, RUEF090 to RUEF250, RTEF120 to RTEF190) H0 16.0 ± 0.5
Abscissa to top (RUSBF075 to RUSBF250, RUEF090 to RUEF300, RTEF120 to RTEF190) H1 32.2 Maximum
Abscissa to top* (RUEF400 to RUEF900) H1 45.0 Maximum
Overall width with lead protrusion (RUSBF075 to RUSBF250, RUEF090 to RUEF300, RTEF120 to RTEF190) C1 43.2 Maximum
Overall width with lead protrusion (RUEF400 to RUEF900) C1 56 Maximum
Overall width without lead protrusion (RUSBF075 to RUSBF250, RUEF090 to RUEF300, RTEF120 to RTEF190) C2 42.5 Maximum
Overall width without lead protrusion (RUEF400 to RUEF900) C2 56 Maximum
Protrusion of cut-out L 11 Maximum
Device pitch (RUSBF075 to RUSBF250, RUEF090 to RUEF300, RTEF120 to RTEF190) — 12.7 ± 0.3
Device pitch (RUEF400 to RUEF900) — 25.4 ± 0.6
Overall tape and lead thickness (RUSBF075 to RUSBF250, RUEF090 to RUEF250, RTEF120 to RTEF190) t1 1.5 Maximum
Overall tape and lead thickness* (RUEF300 to RUEF900) t1 2.3 Maximum
Ordinate to adjacent component lead P1 3.81 ± 0.7
(RUSBF075 to RUSBF250, RUEF090 to RUEF300, RTEF120 to RTEF190)
Ordinate to adjacent component lead (RUEF400 to RUEF900) P1 7.62 ± 0.7
Lead spacing* (RUSBF075 to RUSBF250, RUEF090 to RUEF400, RTEF120 to RTEF190) F 5.05 ± 0.75
Lead spacing* (RUEF500 to RUEF900) F 10.15 ± 0.75
Reel width (RUEF090 to RUEF400, RUSBF075 to RUSBF250, RTEF120 to RTEF190) w2 56.0 Maximum
Reel width (RUEF500* to RUEF900) w2 63.5 Maximum
Space between flanges* (RUEF090 to RUEF400, RUSBF075 to RUSBF250, RTEF120 to RTEF190) w1 48.0 Maximum
Space between flanges* (RUEF500 to RUEF900) w1 55.0 Maximum
Box — 64/372/362 Maximum 10
Consecutive missing places — None —

Table R7 Tape and Reel Specifications for Radial-leaded Devices Cont’d
RGEF and RHEF devices are available in tape and reel packaging per EIA468–B/IEC60286–2 standards.

Abscissa to plane (straight lead) (RGEF250 to RGEF1400) H 18.5 ± 2.5
Abscissa to plane (kinked lead) (RHEF050 to RHEF1500) H0 16.0 ± 0.5
Abscissa to top (RGEF250 to RGEF500, RHEF050 to RHEF450) H1 32.2 Maximum
Abscissa to top* (RGEF600 to RGEF1400, RHEF550 to RHEF1500) H1 45.0 Maximum
Overall width with lead protrusion (RGEF250 to RGEF600, RHEF050 to RHEF450) C1 43.2 Maximum
Overall width with lead protrusion (RGEF700 to RGEF1400, RHEF550 to RHEF1500) C1 55 Maximum
Overall width without lead protrusion (RGEF250 to RGEF600, RHEF050 to RHEF450) C2 42.5 Maximum
Overall width without lead protrusion (RGEF700 to RGEF1400, RHEF550 to RHEF1500) C2 54 Maximum
Protrusion of cut-out L 11 Maximum
Device pitch (RGEF250 to RGEF700, RHEF050 to RHEF600) — 25.4 ± 0.61
Device pitch (RGEF800 to RGEF1400, RHEF650 to RHEF1500) — 25.4 ± 0.6
Overall tape and lead thickness* (RGEF250 to RGEF1100, RHEF050 to RHEF1100) t1 2.0 Maximum
Overall tape and lead thickness* (RGEF1200 to RGEF1400, RHEF1300 to RHEF1500) t1 2.3 Maximum
Ordinate to adjacent component lead (RGEF250 to RGEF1100, RHEF050 to RHEF900) P1 3.81 ± 0.7
Ordinate to adjacent component lead (RGEF1200 to RGEF1400, RHEF1000 to RHEF1500) P1 7.62 ± 0.7
Lead spacing* (RGEF250 to RGEF1100, RHEF050 to RHEF900) F 5.05 ± 0.75
Lead spacing* (RGEF1200 to RGEF1400, RHEF1000 to RHEF1500) F 10.15 ± 0.75
Reel width (RGEF250 to RGEF600, RHEF050 to RHEF450) w2 56.0 Maximum
Reel width* (RGEF600 to RGEF1400 & RHEF550 to RHEF1500) w2 63.5 Maximum
Space between flanges* (RGEF250 to RGEF600, RHEF050 to RHEF450) w1 48.0 Maximum
Space between flanges* (RGEF600 to RGEF1400, RHEF550 to RHEF1500) w1 55.0 Maximum
10 Consecutive missing places — None —

Figure R22 EIA Referenced Taped Component Dimensions for Radial-leaded Devices
Dh Dh Dp Dp
Reference plane
H1 P1 H1 C2
F H C1
L A B H0
W5
D4
W
I2
Cross section A-B
Figure R23 EIA Referenced Reel Dimensions for Radial-leaded Devices
Reel
Upper side
n
Type
a Direction of
unreeling
Lower side
c
w1
Cross section
w2
Part Numbering System for Radial-leaded Devices

RUEF 250 U 2
Packaging
Blank = Packaged in bags
-1 = 25.4mm (1.0 inch) minimum lead length
-2 = Tape and reel
-AP = Ammo pack
-X.X = Special lead cut length (inch)
10
Modifier
K = Standard kinked lead
B = Special kinked lead
S = Straight lead
U = Uncoated device
Product Series
An “F” at the end of product series indicates Pb-free version of product.
Note: Kinked part is recommended to well control the height of part on the PCB in non-auto PCB application.

10
Warning :

PolySwitch Resettable Devices – Line-Voltage-Rated Devices
Line-Voltage-Rated Devices
PolySwitch LVR devices help protect electric motors and
transformers used in commercial and home appliances
from damage caused by mechanical overloads,
overheating, stall, lost neutral and other potentially
harmful conditions.
The LVR line-voltage product line of polymeric positive

temperature coefficient (PPTC) devices includes
components that are rated for line voltages of 120VAC
and 240VAC, for up to 2A of operating current at 20°C.
They help protect against damage caused by both
overcurrent surges and overtemperature faults, offer low
resistance, and are compatibly sized with fuse solutions.
Unlike traditional fuses, PolySwitch devices do not

require replacement after a fault event. After power has
been removed and the overcurrent condition eliminated,
the circuit is restored to normal operating condition.
Compared to bimetal breakers, they offer greater
flexibility, longer lifespan, and lower electromagnetic
interference (EMI).
The PolySwitch LVR devices’ resettable functionality and latching attributes make them a reliable, cost-effective
circuit protection solution for both intermittent- and continuous-operation motor applications. Their low resistance,
fast time-to-trip, and low profile help circuit designers provide a safe and dependable product, comply with
regulatory agency requirements, and reduce warranty repair costs.
LVR/LVRL series are suitable for line-voltage applications up to a continuous operating voltage of 240VAC/120VAC.
RoHS versions of all products are available.
Benefits Features
flexibility • Broadest range of radial-leaded resettable devices
• Compatible with high-volume electronics assembly available in the industry
• Assist in meeting regulatory requirements • Current ratings from 50mA to 2A
• Higher voltage ratings allow use in new applications • Line voltage rating of 120VAC and 240VAC 10
• Agency recognition : UL, CSA, TÜV
• Low resistance
Applications
• Electromagnetic loads • Medical equipment • Security and fire alarm systems
• Game machines • Motors, fans and blowers • Test and measurement equipment
• Industrial controls • POS equipment • Transformers
• Lighting ballast • Satellite video receivers • USB hubs, ports and peripherals
• Loudspeakers
139
Table L1 Product Series - Current Rating, Voltage Rating / Typical Resistance for LVR Devices
LVR LVRL
Voltage Rating 240VAC / 120VAC 120VAC
Hold Current (A)
0.050 25.00Ω —
0.080 9.800Ω —
0.120 4.800Ω —
0.160 3.400Ω —
0.250 1.700Ω —
0.330 1.000Ω —
0.400 0.800Ω —
0.550 0.590Ω —
0.750 0.400Ω 0.325Ω
1.000 0.276Ω 0.224Ω
1.250 0.209Ω 0.148Ω
1.350 — 0.138Ω
2.000 0.110Ω 0.097Ω
Table L2 Thermal Derating for LVR Devices [Hold Current (A) at Ambient Temperature (°C)]
Part Number -20°C 0°C 20°C 25°C 40°C 50°C 60°C 70°C 85°C
LVR/LVRL
LVR005N 0.08 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.02
LVR008N 0.12 0.10 0.08 0.08 0.07 0.06 0.05 0.04 0.03
LVR012 0.18 0.15 0.12 0.12 0.10 0.09 0.07 0.06 0.04
LVR016 0.24 0.20 0.16 0.16 0.13 0.11 0.10 0.08 0.05
LVR025 0.38 0.32 0.25 0.25 0.21 0.18 0.15 0.13 0.09
LVR033 0.50 0.42 0.33 0.33 0.27 0.23 0.20 0.17 0.11
LVR040 0.61 0.51 0.40 0.40 0.33 0.28 0.24 0.20 0.14
LVR055 0.80 0.68 0.55 0.54 0.46 0.40 0.35 0.29 0.22
LVR075 1.23 0.98 0.75 0.74 0.60 0.56 0.49 0.45 0.41
LVR100 1.65 1.30 1.00 0.94 0.80 0.75 0.65 0.60 0.55
LVR125 2.06 1.63 1.25 1.20 1.00 0.94 0.81 0.75 0.69
LVR200 3.30 2.60 2.00 1.97 1.60 1.50 1.30 1.20 1.10
LVRL075 1.08 0.93 0.75 0.74 0.64 0.57 0.51 0.44 0.35
LVRL100 1.40 1.19 1.00 0.94 0.82 0.73 0.65 0.57 0.45
LVRL125 1.80 1.53 1.25 1.20 1.04 0.94 0.83 0.73 0.60
LVRL135 2.00 1.65 1.35 1.29 1.12 1.01 0.90 0.78 0.65
LVRL200 3.05 2.55 2.00 1.97 1.72 1.55 1.39 1.22 0.98
Figure L1 Thermal Derating Curve for LVR Devices

10
A = LVR075-LVR200 Figure L1
B = LVRL075-LVRL200
180
C = LVR005N-LVR055 170
A
160
B
150
140 C
130
120
110
100
90
80
70
60
A
50
C
40
30
B
-30 -20 -10 0 10 20 30 40 50 60 70 80 90

Table L3 Electrical Characteristics for LVR Devices*
VMAX† IMAX†
Part IH IT Operating Interrupt Interrupt PD Typ Max. Time-to-trip RMIN RMAX R1MAX Lead Size
Number (A) (A) (VAC) (VAC) (A) (W) (A) (s) (Ω) (Ω) (Ω) [mm (AWG)]
LVR/LVRL
240 265 1.0
LVR005NK 0.05 0.12 0.9 0.25 10.0 18.500 31.000 65.000 [0.51mm(24)]
120 135 20.0
240 265 1.0
LVR005NS 0.05 0.12 0.9 0.25 10.0 18.500 31.000 65.000 [0.51mm(24)]
120 135 20.0
240 265 1.2
LVR008NK 0.08 0.19 0.9 0.40 10.0 7.400 12.000 26.000 [0.51mm(24)]
120 135 20.0
240 265 1.2
LVR008NS 0.08 0.19 0.9 0.40 10.0 7.400 12.000 26.000 [0.51mm(24)]
120 135 20.0
240 265 1.2
LVR012K 0.12 0.30 1.0 0.60 15.0 3.000 6.500 12.000 [0.51mm(24)]
120 135 20.0
240 265 1.2
LVR012S 0.12 0.30 1.0 0.60 15.0 3.000 6.500 12.000 [0.51mm(24)]
120 135 20.0
240 265 2.0
LVR016K 0.16 0.37 1.4 0.80 15.0 2.500 4.100 7.800 [0.51mm(24)]
120 135 20.0
240 265 2.0
LVR016S 0.16 0.37 1.4 0.80 15.0 2.500 4.100 7.800 [0.51mm(24)]
120 135 20.0
240 265 3.5
LVR025K 0.25 0.56 1.5 1.25 18.5 1.300 2.100 3.800 [0.64mm(22)]
120 135 20.0
240 265 3.5
LVR025S 0.25 0.56 1.5 1.25 18.5 1.300 2.100 3.800 [0.64mm(22)]
120 135 20.0
240 265 4.5
LVR033K 0.33 0.74 1.7 1.65 21.0 0.770 1.240 2.600 [0.64mm(22)]
120 135 20.0
240 265 4.5
LVR033S 0.33 0.74 1.7 1.65 21.0 0.770 1.240 2.600 [0.64mm(22)]
120 135 20.0
240 265 5.5
LVR040K 0.40 0.90 2.0 2.00 24.0 0.600 0.970 1.900 [0.64mm(22)]
120 135 20.0
240 265 5.5
LVR040S 0.40 0.90 2.0 2.00 24.0 0.600 0.970 1.900 [0.64mm(22)]
120 135 20.0
240 265 7.0
LVR055K 0.55 1.25 3.4 2.75 26.0 0.450 0.730 1.450 [0.81mm(20)]
120 135 20.0
240 265 7.0
LVR055S 0.55 1.25 3.4 2.75 26.0 0.450 0.730 1.450 [0.81mm(20)]
120 135 20.0
LVR075S 0.75 1.50 240 265 7.5 2.6 3.75 18.0 0.316 0.483 0.839 [0.81mm(20)]
LVR100S 1.00 2.00 240 265 10.0 2.9 5.00 21.0 0.218 0.334 0.580 [0.81mm(20)]
LVR125S 1.25 2.50 240 265 12.5 3.3 6.25 23.0 0.165 0.253 0.440 [0.81mm(20)]
LVR200S 2.00 4.00 240 265 20.0 4.5 10.00 28.0 0.089 0.131 0.221 [0.81mm(20)]
LVRL075S 0.75 1.52 120 135 7.5 1.8 3.75 14.0 0.250 0.400 0.690 [0.81mm(20)]
LVRL100S 1.00 2.00 120 135 10.0 2.2 5.00 13.6 0.179 0.269 0.470 [0.81mm(20)]
LVRL125S 1.25 2.50 120 135 12.5 2.0 6.25 18.0 0.117 0.179 0.320 [0.81mm(20)]
LVRL135S 1.35 2.70 120 135 13.5 2.8 6.75 20.0 0.109 0.167 0.300 [0.81mm(20)]
LVRL200S
Notes:
2.00 4.20 120 135 20.0 3.9 10.00 36.0 0.075 0.117 0.205 [0.81mm(20)]
10
VMAX Operating: Maximum continuous voltage device can withstand without damage at rated current.
VMAX Interrupt : Under specified conditions this is the highest voltage that can be applied to the device at the maximum interrupt current.
IMAX Interrupt : Maximum fault current device can withstand without damage at rated voltage.
R1MAX : Maximum resistance of device when measured one hour post trip at 20°C unless otherwise specified.
* Electrical characteristics determined at 20°C.
† See Application Limitations on next page.

Warning : Application Limitations for the LVR Product Line
1) Users should independently evaluate the suitability of and test each product selected for their own application.
2) This product should not be used in an application where the maximum interrupt voltage or maximum interrupt current can be exceeded
in a fault condition. Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing
and flame.
3) A PPTC device is not a fuse - it is a nonlinear thermistor that limits current. Under a fault condition all PPTC devices go into a high resistance
state but do not open circuit, so hazardous voltage may be present at PPTC locations.
4) The devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should
5) In most applications power must be removed and the fault condition cleared in order to reset a PPTC device; however under certain
unusual conditions, a PPTC device may automatically reset. PPTC devices should not be used in an application where an automatic reset
could create a safety hazard, such as garbage disposals and blenders. Appropriate qualification testing should be performed.
6) It is the responsibility of the user to determine the need for back up or failsafe protection to prevent damage that may occur in the event
of abnormal function or failure of the PPTC device.
7) Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of a PPTC device.This product should
not be used in an application where the maximum interrupt voltage or maximum interrupt current can be exceeded by inductive spikes.
8) Devices are not recommended for reflow soldering.
9) Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal,
or mechanical procedures for electronic components.
10) PPTC devices are not recommended for installation in applications where the device is constrained such that its PTC properties are
inhibited, for example in rigid potting materials or in rigid housings, which lack adequate clearance to accommodate device expansion.
11) Contamination of the PPTC material with certain silicone-based oils or some aggressive solvents can adversely impact the performance
of the devices.
Figure L2-L5 Dimension Figures for LVR Devices
Figure L2 Figure L3
A E A E
B B
D D
C C
CL to CL CL to CL
Figure L4 Figure L5
10 A E A E
B
B
D
D
C C
CL to CL CL to CL

Table L4 Dimensions for LVR Devices in Millimeters (Inches)
A B C D E
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figure
LVR/LVRL
LVR005NK — 6.9 — 12.1 4.3 5.8 7.6 — — 4.6
(0.27) (0.48) (0.17) (0.23) (0.30) (0.18) L2
LVR005NS — 6.9 — 9.9 4.3 5.8 7.6 — — 4.6
(0.27) (0.39) (0.17) (0.23) (0.30) (0.18) L4
LVR008NK — 7.2 — 12.4 4.3 5.8 7.6 — — 4.6
(0.28) (0.49) (0.17) (0.23) (0.30) (0.18) L2
LVR008NS — 7.2 — 10.2 4.3 5.8 7.6 — — 4.6
(0.28) (0.40) (0.17) (0.23) (0.30) (0.18) L4
LVR012K — 8.3 — 12.9 4.3 5.8 7.6 — — 3.8
(0.33) (0.51) (0.17) (0.23) (0.30) (0.15) L2
LVR012S — 8.3 — 10.7 4.3 5.8 7.6 — — 3.8
(0.33) (0.43) (0.17) (0.23) (0.30) (0.15) L4
LVR016K — 9.9 — 13.8 4.3 5.8 7.6 — — 3.8
(0.39) (0.54) (0.17) (0.23) (0.30) (0.15) L2
LVR016S — 9.9 — 12.5 4.3 5.8 7.6 — — 3.8
(0.39) (0.50) (0.17) (0.23) (0.30) (0.15) L4
LVR025K — 9.6 — 18.8 4.3 5.8 7.6 — — 3.8
(0.38) (0.74) (0.17) (0.23) (0.30) (0.15) L3
LVR025S — 9.6 — 17.4 4.3 5.8 7.6 — — 3.8
(0.38) (0.69) (0.17) (0.23) (0.30) (0.15) L5
LVR033K — 11.4 — 19.0 4.3 5.8 7.6 — — 3.8
(0.45) (0.75) (0.17) (0.23) (0.30) (0.15) L3
LVR033S — 11.4 — 16.5 4.3 5.8 7.6 — — 3.8
(0.45) (0.65) (0.17) (0.23) (0.30) (0.15) L5
LVR040K — 11.5 — 20.9 4.3 5.8 7.6 — — 3.8
(0.46) (0.82) (0.17) (0.23) (0.30) (0.15) L3
LVR040S — 11.5 — 19.5 4.3 5.8 7.6 — — 3.8
(0.46) (0.77) (0.17) (0.23) (0.30) (0.15) L5
LVR055K — 14.0 — 22.4 4.3 5.8 7.6 — — 4.1
(0.55) (0.88) (0.17) (0.23) (0.30) (0.16) L3
LVR055S — 14.0 — 21.7 4.3 5.8 7.6 — — 4.1
(0.55) (0.85) (0.17) (0.23) (0.30) (0.16) L5
LVR075S — 11.5 — 23.4 4.1 6.1 5.1 — — 4.8
(0.45) (0.92) (0.16) (0.24) (0.20) (0.19) L5
LVR100S — 18.7 — 24.4 8.9 11.4 5.1 — — 5.1
(0.74) (0.96) (0.35) (0.45) (0.20) (0.20) L4
LVR125S — 21.2 — 27.4 8.9 11.4 5.1 — — 5.3
(0.84) (1.08) (0.35) (0.45) (0.20) (0.21) L4
LVR200S — 24.9 — 33.8 8.9 11.4 5.1 — — 6.1
(0.98) (1.33) (0.35) (0.45) (0.20) (0.24) L5
LVRL075S — 10.9 — 17.0 4.3 5.8 7.6 — — 4.1
(0.43) (0.67) (0.17) (0.23) (0.30) (0.16) L5
LVRL100S — 11.5 — 20.1 4.3 5.8 7.6 — — 4.1 10
(0.45) (0.79) (0.17) (0.23) (0.30) (0.16) L5
LVRL125S — 14.0 — 21.7 4.3 5.8 7.6 — — 4.1
(0.55) (0.85) (0.17) (0.23) (0.30) (0.16) L5
LVRL135S — 16.3 — 21.7 4.3 5.8 7.6 — — 4.1
(0.64) (0.85) (0.17) (0.23) (0.30) (0.16) L5
LVRL200S — 23.5 — 31.8 9.4 10.9 7.6 — — 4.1
(0.93) (1.25) (0.37) (0.43) (0.30) (0.16) L5

Figure L6 Typical Time-to-trip curves at 20°C for LVR Devices
LVR/LVRL Figure L6
A = LVR005N K = LVRL100 1000
B = LVR008N L = LVR100
C = LVR012 M = LVRL125
L Q
D = LVR016 N = LVR125 MN
J O
100 E F G
E = LVR025 O = LVRL135 B P
F = LVR033 P = LVRL200 A C H K
I
Time-to-trip (s)
D
G = LVR040 Q = LVR200
10
H = LVR055
I = LVRL075 N Q
J = LVR075 L MO P
H J
1 I K
G
B D F
A
C E
0.1
0.1 1 10 100
Fault Current (A)
Table L5 Physical Characteristics and Environmental Specifications for LVR Devices
LVR/LVRL
Lead material LVR005N-016 : Tin-plated copper, (24AWG), ø0.51mm (0.020in.)

LVR025-040 : Tin-plated copper, (22AWG), ø0.64mm (0.025in.)
LVR055-200 : Tin-plated copper, (20AWG), ø0.81mm (0.032in.)
LVRL : Tin-plated copper, (20AWG), ø0.81mm (0.032in.)
Solder heat withstand Per IEC-STD 68-2-20, Test Tb, Method 1A, Condition B, can withstand 10 seconds at 260°C ±5°C
Insulating material LVR005N-055 : Cured, flame-retardant epoxy polymer, meets UL 94V-0
LVR075-200 : Cured, flame-retardant modified silicone, meets UL 94V-0
LVRL : Cured, flame-retardant epoxy polymer, meets UL 94V-0
10 85°C, 1000 hours ±10%
Agency Recognitions for LVR Devices
UL File # E74889
CSA File # CA78165
TÜV Certificate number available on request (per IEC 60730-1).

Table L6 Packaging and Marking Information for LVR Devices

LVR/LVRL
LVR005NK 500 — — 10,000 L005 UL,CSA, TÜV
LVR005NK-2 — 1,500 — 7,500 L005 UL,CSA, TÜV
LVR005NS 500 — — 10,000 L005 UL,CSA, TÜV
LVR005NS-2 — 1,500 — 7,500 L005 UL,CSA, TÜV
LVR008NK 500 — — 10,000 L008 UL,CSA, TÜV
LVR008NK-2 — 1,500 — 7,500 L008 UL,CSA, TÜV
LVR008NS 500 — — 10,000 L008 UL,CSA, TÜV
LVR008NS-2 — 1,500 — 7,500 L008 UL,CSA, TÜV
LVR012K 500 — — 10,000 L012 UL,CSA, TÜV
LVR012K-2 — 2,000 — 10,000 L012 UL,CSA, TÜV
LVR012S 500 — — 10,000 L012 UL,CSA, TÜV
LVR012S-2 — 2,000 — 10,000 L012 UL,CSA, TÜV
LVR016K 500 — — 10,000 L016 UL,CSA, TÜV
LVR016K-2 — 2,000 — 10,000 L016 UL,CSA, TÜV
LVR016S 500 — — 10,000 L016 UL,CSA, TÜV
LVR016S-2 — 2,000 — 10,000 L016 UL,CSA, TÜV
LVR025K 500 — — 10,000 L025 UL,CSA, TÜV
LVR025K-2 — 2,000 — 10,000 L025 UL,CSA, TÜV
LVR025S 500 — — 10,000 L025 UL,CSA, TÜV
LVR025S-2 — 2,000 — 10,000 L025 UL,CSA, TÜV
LVR033K 500 — — 10,000 L033 UL,CSA, TÜV
LVR033K-2 — 2,000 — 10,000 L033 UL,CSA, TÜV
LVR033S 500 — — 10,000 L033 UL,CSA, TÜV
LVR033S-2 — 2,000 — 10,000 L033 UL,CSA, TÜV
LVR040K 500 — — 10,000 L040 UL,CSA, TÜV
LVR040K-2 — 2,000 — 10,000 L040 UL,CSA, TÜV
LVR040S 500 — — 10,000 L040 UL,CSA, TÜV
LVR040S-2 — 2,000 — 10,000 L040 UL,CSA, TÜV
LVR055K 500 — — 10,000 L055 UL,CSA, TÜV
LVR055S 500 — — 10,000 L055 UL,CSA, TÜV
LVR055S-2 — 1,000 — 5,000 L055 UL,CSA, TÜV
LVR075S 500 — — 10,000 L075 UL,CSA, TÜV
LVR100S 250 — — 5,000 L100 UL,CSA, TÜV
LVR125S 250 — — 5,000 L125 UL,CSA, TÜV
LVR200S 250 — — 5,000 L200 UL,CSA, TÜV
LVRL075S 500 — — 10,000 L075 UL,CSA, TÜV
LVRL100S 500 — — 10,000 L100 UL,CSA, TÜV
LVRL125S 500 — — 10,000 L125 UL,CSA, TÜV
LVRL135S 500 — — 10,000 L135 UL,CSA, TÜV 10
LVRL200S 250 — — 5,000 L200 UL,CSA, TÜV

Table L7 Tape and Reel Specifications for LVR Devices
LVR devices are available in tape and reel packaging per EIA468-B/IEC60286-2 standards.
See Figures L7 and L8 for details.

Abscissa to plane (straight lead) (LVR005N to LVR016) H 18.5 ± 2.5
Abscissa to plane (kinked lead) (LVR005N to LVR016) H0 16.0 ± 0.5
Abscissa to top (LVR005N to LVR016) H1 32.2 Maximum
Abscissa to top* (LVR025 to LVR055) H1 45.0 Maximum
Overall width with lead protrusion (LVR005N to LVR016) C1 43.2 Maximum
Overall width with lead protrusion (LVR025 to LVR055) C1 56.0 Maximum
Overall width without lead protrusion (LVR005N to LVR016) C2 42.5 Maximum
Overall width without lead protrusion (LVR025 to LVR055) C2 56.0 Maximum
Device pitch (LVR005N to LVR040) — 12.7 ± 0.3
Device pitch (LVR055) — 25.4 ± 0.6
Overall tape and lead thickness (LVR005N to LVR040) t1 1.5 Maximum
Overall tape and lead thickness (LVR055) t1 2.3 Maximum
Lead spacing* F 5.08 +0.75/-0.5
Reel width (LVR005N to LVR040) w2 56.0 Maximum
Reel width* (LVR055) w2 63.5 Maximum
Space between flanges* (LVR005N to LVR040) w1 48.0 Maximum
Space between flanges* (LVR055) w1 55.0 Maximum
10 *Differs from EIA specification.

Figure L7 EIA Referenced Taped Component Dimensions for LVR Devices
Dh Dh Dp Dp
Reference plane
H1 P1 H1 C2
F H C1
L A B H0
W5
W4
W
I2
Cross section A-B
Figure L8 EIA Referenced Reel Dimensions for LVR Devices
Reel
Upper side
n
Type
a Direction of
unreeling
Lower side
c
w1
Cross section
w2
Part Numbering System for LVR Devices
LVR 075 S 2
Packaging
Blank = Packaged in bags
10
-1 = 25.4mm (1.0 inch) minimum lead length
-2 = Tape and reel
-X.X = Special lead cut length (inch)
Modifier
K = Standard kinked lead
S = Straight lead
Product Series
LVR = 240V rated
LVRL = 120V rated

10
148
PolySwitch Resettable Devices – Automotive Devices
Automotive Devices
We have provided PPTC resettable devices for the
automotive industry for over 25 years. With the advent of
TS16949 and our continued involvement in the
automotive industry, we developed automotive specific
versions of our PolySwitch PPTC devices (AHS, ASMD,
AHRF, AHEF, AGRF and BD). These products are
qualified and sold under PS400 specification which is
derived from AEC-Q200, the standard for electronic
components used in the automotive industry. The key
difference between these product families and other
protection devices in our circuit protection product
portfolio is the qualification process followed according
to a series of rigorous tests related to the automotive
environment. As a result, they are characterized by
specific additional values determined post automotive
related testing.
Benefits Features
• Expertise from the world’s leading resettable • RoHS compliant
overcurrent protection manufacturer • Overcurrent and overvoltage circuit protection
• High quality products from the world’s largest passive devices
component manufacturer • Resettable and single-use overcurrent devices
• Worldwide team dedicated to support automotive • Wide range of form factor and termination methods
applications
• Products meet applicable automotive industry
• Wide range of dedicated automotive surface-mount standards
and radial-leaded resettable overcurrent devices
• Devices compatible with high-volume electronics
• High performance transient voltage protection assembly
devices
Applications
10
• Motor and motor circuit protection including power • Powered networks and busses
door-locks, mirrors, lumbar pumps, seats, sunroofs • Air-flow detection and overcurrent protection in
and windows HVAC and cooling fan systems
• Electronic Control Unit (ECU) I/O protection • Stall detection in express window and sunroof circuits
• Heating Ventilation and Cooling (HVAC) motor and • Power distribution, electrical centers and junction box
I/O protection resettable overcurrent protection
• Telematics, infotainment and navigations systems • Wire downsizing
• Liquid Crystal Display (LCD) back-light heaters • Motor Electromagnetic Interference (EMI) suppression
• Power and cigarette lighter outlets, plugs and • Electrostatic Discharge (ESD) damage protection
adapter/chargers
• Load dump and other transient voltage protection
149
Table A1
Automotive Devices
AGRF AHRF AHRF AHEF AHS ASMD ASMD ASMD BD

Voltage Rating 16V 16V 30V 32V 16V 16V 30V 60V 14V
Hold Current (A)
0.30 — — — — — — — 2.90Ω —
0.50 — — 0.565Ω 0.5650Ω — — — 0.90Ω —
0.70 — — 0.385Ω 0.3850Ω — — — — —
0.75 — — — — — — 0.60Ω — —
0.80 — — — — 0.25Ω — — — —
1.00 — — 0.225Ω 0.2250Ω — — 0.30Ω — —
1.25 — — — — — 0.16Ω — — —
1.50 — — — — — 0.14Ω — — —
1.60 — — — — 0.10Ω — — — —
2.00 — 0.0565Ω — — 0.07Ω 0.09Ω — — —
2.50 — — — — — 0.06Ω — — —
3.00 — 0.0410Ω — 0.0520Ω 0.05Ω — — — —
4.00 0.0300Ω 0.0305Ω — — — — — — —
4.50 — 0.0290Ω — — — — — — —
5.00 0.0192Ω — — 0.0200Ω — — — — —
5.50 — 0.0190Ω — — — — — — —
6.00 0.0145Ω 0.0180Ω — — — — — — —
6.50 — 0.0140Ω — — — — — — —
7.00 0.0105Ω 0.0126Ω — — — — — — —
7.50 — 0.0120Ω — 0.0120Ω — — — — —
8.00 0.0086Ω 0.0104Ω — — — — — — 0.0115Ω
9.00 0.0070Ω 0.0100Ω — — — — — — —
10.00 0.0056Ω 0.0083Ω — 0.0083Ω — — — — —
11.00 0.0050Ω 0.0069Ω — — — — — — —
12.00 0.0046Ω — — — — — — — 0.0060Ω
13.00 — 0.0055Ω — — — — — — —
14.00 0.0040Ω 0.0050Ω — — — — — — —
15.00 — 0.0050Ω — — — — — — —
16.00 — — — — — — — — 0.00365Ω
20.00 — — — — — — — — 0.00285Ω
21.00 — — — — — — — — 0.00260Ω
Thermal Derating for Automotive Devices

Table A2
10 Maximum Ambient Temperature
AGRF
16V — Radial-leaded
AGRF400 5.9 5.3 4.8 4.1 4.0 3.5 3.2 2.8 2.5 1.9 —
AGRF500 7.3 6.6 6.0 5.2 5.0 4.4 4.0 3.6 3.1 2.4 —
AGRF600 8.8 8.0 7.2 6.2 6.0 5.2 4.8 4.2 3.8 2.8 —
AGRF700 10.3 9.3 8.4 7.3 7.0 6.2 5.6 5.0 4.4 3.3 —
AGRF800 11.7 10.7 9.6 8.3 8.0 6.9 6.4 5.6 5.1 3.7 —
AGRF900 13.2 11.9 10.7 9.4 9.0 7.9 7.2 6.4 5.6 4.2 —
AGRF1000 14.7 13.3 12.0 10.3 10.0 8.7 8.0 7.0 6.3 4.7 —
AGRF1100 16.1 14.6 13.1 11.5 11.0 9.7 8.8 7.8 6.9 5.2 —
AGRF1200 17.6 16.0 14.4 12.4 12.0 10.4 9.6 8.4 7.6 5.6 —
AGRF1400 20.5 18.7 16.8 14.5 14.0 12.1 11.2 9.8 8.9 6.5 —

Thermal Derating for Automotive Devices
Table A2
AHRF (High Temperature)
AHRF050 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.4 0.3 0.3 0.1
AHRF070 1.0 0.9 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.2
AHRF100 1.4 1.2 1.1 1.0 1.0 0.9 0.8 0.7 0.7 0.6 0.2
AHRF200 2.7 2.5 2.3 2.1 2.00 1.8 1.6 1.5 1.3 1.1 0.5
AHRF300 4.1 3.7 3.4 3.1 3.00 2.7 2.4 2.2 2.0 1.7 0.7
AHRF400 5.6 5.1 4.7 4.2 4.00 3.6 3.3 3.0 2.7 2.3 1.0
AHRF450 6.1 5.6 5.1 4.6 4.50 4.0 3.6 3.3 3.0 2.5 1.1
AHRF550 7.5 6.9 6.2 5.7 5.50 4.9 4.4 4.0 3.7 3.1 1.4
AHRF600 8.2 7.5 6.8 6.2 6.00 5.3 4.9 4.4 4.0 3.3 1.5
AHRF650 8.8 8.1 7.4 6.7 6.50 5.7 5.3 4.8 4.3 3.6 1.6
AHRF700 9.5 8.7 8.0 7.2 7.00 6.2 5.6 5.2 4.7 3.9 1.7
AHRF750 10.2 9.4 8.6 7.7 7.50 6.6 6.1 5.6 5.0 4.1 1.9
AHRF800 10.9 10.0 9.1 8.2 8.00 7.1 6.4 5.9 5.3 4.4 2.0
AHRF900 12.2 11.2 10.2 9.3 9.00 8.0 7.2 6.6 6.0 5.0 2.2
AHRF1000 13.6 12.5 11.4 10.3 10.00 8.8 8.1 7.4 6.6 5.5 2.5
AHRF1100 14.9 13.7 12.5 11.3 11.00 9.7 8.8 8.1 7.3 6.1 2.7
AHRF1300 17.7 16.3 14.8 13.4 13.00 11.4 10.5 9.6 8.6 7.2 3.3
AHRF1400 19.0 17.5 15.9 14.4 14.00 12.4 11.2 10.3 9.3 7.8 3.5
AHRF1500 20.4 18.8 17.1 15.5 15.00 13.2 12.1 11.1 9.9 8.3 3.8
AHEF (High Temperature)
AHEF050 0.7 0.6 0.60 0.5 0.5 0.4 0.400 0.40 0.30 0.300 0.1
AHEF070 1.0 0.9 0.80 0.7 0.7 0.6 0.600 0.50 0.50 0.400 0.2
AHEF100 1.4 1.2 1.10 1.0 1.0 0.9 0.800 0.70 0.70 0.600 0.2
AHEF300 4.1 3.8 3.42 3.1 3.0 2.7 2.430 2.22 1.98 1.650 0.6
AHEF500 6.8 6.3 5.70 5.2 5.0 4.5 4.050 3.70 3.30 2.750 1.0
AHEF750 10.2 9.4 8.55 7.7 7.5 6.7 6.075 5.55 4.95 4.125 1.5
AHEF1000 13.6 12.5 11.40 10.3 10.0 8.9 8.100 7.40 6.60 5.500 2.0
AHS (High Temperature)
16V — Surface-mount
AHS080-2018 1.20 1.04 0.90 0.80 0.77 0.68 0.62 0.60 0.53 0.46 0.26
AHS160 2.15 1.96 1.78 1.60 1.55 1.42 1.33 1.24 1.15 1.01 0.64
AHS200 2.90 2.50 2.20 2.00 1.94 1.80 1.75 1.70 1.40 1.18 0.67
AHS300 4.20 3.80 3.70 3.00 2.92 2.63 2.44 2.10 2.00 1.76 1.00
ASMD
16-60V — Surface-mount
ASMD030F 0.35 0.31 0.27 0.23 0.22 0.19 0.17 0.15 0.13 0.11 — 10
ASMD050F 0.59 0.53 0.46 0.39 0.37 0.33 0.29 0.26 0.23 0.18 —
ASMD075F 0.91 0.81 0.71 0.60 0.58 0.50 0.45 0.40 0.35 0.28 —
ASMD100F 1.37 1.22 1.06 0.90 0.86 0.76 0.68 0.60 0.52 0.41 —
ASMD125F 1.58 1.40 1.23 1.04 1.00 0.87 0.78 0.70 0.60 0.48 —
ASMD150F 1.93 1.70 1.50 1.27 1.22 1.07 0.95 0.85 0.74 0.58 —
ASMD200F 2.63 2.34 2.04 1.73 1.66 1.45 1.30 1.16 1.00 0.80 —
ASMD250F 3.00 2.66 2.32 1.97 1.89 1.65 1.48 1.32 1.14 0.91 —
BD
14V— Bladed Device
NEW BD280-1130-10/16 12.4 11.0 9.7 8.3 8.0 7.0 6.3 5.6 5.0 4.0 —
NEW BD280-1130-15/16 17.4 15.7 14.1 12.4 12.0 10.8 9.9 9.1 8.3 7.0 —
NEW BD280-1130-20/16 24.0 21.6 19.1 16.6 16.0 14.1 12.9 11.7 10.4 8.6 —
NEW BD280-1927-25/16-W 32.0 28.3 24.6 20.9 20.0 17.2 15.4 13.5 11.7 8.9 —
NEW BD280-1927-30/16-W 34.1 30.1 26.0 22.0 21.0 18.0 16.0 14.0 11.9 9.1 —

Figure A1-A4 Thermal Derating Curves for Automotive Devices
A = AGRF Figure A1
B = AHRF 200

150 A
100
50
A B
0
-40 -20 0 20 40 60 80 100 120
Figure A2
AHEF
200
150
100
50
0
-40 -20 0 20 40 60 80 100 120
Figure A3
A = ASMD
10 B = AHS 200
A
150
100
50
A B
0
-40 -20 0 20 40 60 80 100 120

Figure A1-A4 Thermal Derating Curves for Automotive Devices Cont’d
BD Figure A4
200
180
160

140
120
100
80
60
40
20
0
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
Table A3 Electrical Characteristics for Automotive Devices

Part IH(A)@ IH(A)@ IT VMAX IMAX PD Typ Max. Time-to-trip RMIN R1MAX RaMAX Figure for
Number R1MAX RaMAX (A) (VDC) (A) (W) (A) (s) (Ω) (Ω) (Ω) Dimensions
AGRF
AGRF400 4.0 3.0 7.6 16 100 2.5 20.0 2.0 0.0186 0.0610 0.0850 A5, A8, A9
AGRF500 5.0 4.3 9.4 16 100 2.7 25.0 2.5 0.0140 0.0340 0.0480 A5, A8, A9
AGRF600 6.0 5.3 10.7 16 100 2.8 30.0 3.5 0.0095 0.0280 0.0320 A5, A8, A9
AGRF700 7.0 6.5 13.2 16 100 3.0 35.0 4.0 0.0066 0.0200 0.0220 A5, A8, A9
AGRF800 8.0 7.6 15.0 16 100 3.2 40.0 5.5 0.0049 0.0175 0.0181 A5, A8, A9
AGRF900 9.0 8.6 16.5 16 100 3.4 45.0 6.0 0.0041 0.0135 0.0140 A5, A8, A9
AGRF1000 10.0 9.6 18.5 16 100 3.6 50.0 7.0 0.0034 0.0102 0.0106 A5, A8, A9
AGRF1100 11.0 10.5 20.3 16 100 3.7 55.0 7.5 0.0033 0.0089 0.0093 A5, A8, A9
AGRF1200 12.0 11.5 22.1 16 100 4.2 60.0 8.0 0.0030 0.0086 0.0091 A5, A8, A9
AGRF1400 14.0 13.0 27.3 16 100 4.6 70.0 9.0 0.0022 0.0064 0.0067 A5, A8, A9
AHRF050 0.5 0.5 1.0 30 40 0.9 2.5 3.0 0.3500 1.100 1.100 A8, A9, A10
AHRF070 0.7 0.7 1.4 30 40 1.4 3.5 3.2 0.2300 0.800 0.800 A5, A8, A9
AHRF100 1.0 1.0 1.9 30 40 1.4 5.0 6.2 0.1500 0.430 0.430 A8, A9, A10
AHRF200 2.0 2.0 3.8 16 100 1.4 10.0 4.8 0.0390 0.110 0.110 A8, A9, A10 10
AHRF300 3.0 3.0 6.5 16 100 3.0 15.0 5.0 0.0290 0.079 0.079 A5, A8, A9
AHRF400 4.0 4.0 7.4 16 100 3.3 20.0 5.0 0.0210 0.060 0.060 A5, A8, A9
AHRF450 4.5 4.5 8.7 16 100 3.6 22.5 4.0 0.0170 0.054 0.054 A5, A8, A9
AHRF550 5.5 5.5 10.0 16 100 3.5 27.5 6.0 0.0130 0.037 0.037 A5, A8, A9
AHRF600 6.0 6.0 12.0 16 100 4.1 30.0 6.5 0.0100 0.032 0.032 A5, A8, A9
AHRF650 6.5 6.5 13.7 16 100 4.3 32.5 7.0 0.0090 0.026 0.026 A5, A8, A9
AHRF700 7.0 7.0 13.1 16 100 4.0 35.0 7.0 0.0087 0.025 0.025 A5, A8, A9
AHRF750 7.5 7.5 14.8 16 100 4.5 37.5 8.0 0.0074 0.022 0.022 A5, A8, A9
AHRF800 8.0 8.0 15.0 16 100 4.2 40.0 8.0 0.0072 0.020 0.020 A5, A8, A9
AHRF900 9.0 9.0 18.5 16 100 5.0 45.0 11.5 0.0061 0.017 0.017 A5, A8, A9
AHRF1000 10.0 10.0 20.5 16 100 5.3 50.0 10.5 0.0051 0.015 0.015 A5, A8, A9
AHRF1100 11.0 11.0 21.2 16 100 5.5 55.0 11.0 0.0048 0.013 0.013 A5, A8, A9
AHRF1300 13.0 13.0 27.0 16 100 6.9 65.0 15.0 0.0034 0.010 0.010 A5, A8, A9
AHRF1400 14.0 14.0 28.3 16 100 6.9 70.0 15.5 0.0029 0.009 0.009 A5, A8, A9
AHRF1500 15.0 15.0 33.0 16 100 7.0 75.0 20.0 0.0027 0.0092 0.0092 A5, A8, A9

Table A3 Electrical Characteristics for Automotive Devices Cont’d
Part IH(A)@ IH(A)@ IT VMAX IMAX PD Typ Max. Time-to-trip RMIN R1MAX RaMAX Figure for
Number R1MAX RaMAX (A) (VDC) (A) (W) (A) (s) (Ω) (Ω) (Ω) Dimensions
AHEF050 0.5 0.5 1.0 32 100 0.9 2.5 3.0 0.3500 1.100 1.100 A8, A9, A10
AHEF070 0.7 0.7 1.4 32 100 0.9 3.5 3.2 0.2300 0.800 0.800 A8, A9, A11
AHEF100 1.0 1.0 1.9 32 100 1.4 5.0 6.2 0.1500 0.430 0.430 A8, A9, A10
AHEF300 3.0 3.0 6.0 32 100 3.2 15.0 5.0 0.0350 0.110 0.110 A8, A9, A12
AHEF500 5.0 5.0 10.0 32 100 5.3 25.0 9.0 0.0150 0.040 0.040 A8, A9, A12
AHEF750 7.5 7.5 15.0 32 100 6.5 37.5 13.0 0.0074 0.023 0.023 A8, A9, A12
AHEF1000 10.0 10.0 20.0 32 100 7.0 50.0 15.0 0.0060 0.016 0.016 A8, A9, A12
AHS080-2018 0.80 0.80 2.00 16 70 1.5 8.0 9.0 0.130 0.550 0.550 A6
AHS160 1.60 1.60 3.20 16 70 2.2 8.0 15.0 0.050 0.150 0.150 A7
AHS200 2.00 2.00 4.00 16 70 2.3 8.0 13.4 0.050 0.140 0.140 A7
AHS300 3.00 3.00 6.00 16 70 3.0 15.0 8.0 0.024 0.083 0.083 A7
ASMD
ASMD030F 0.23 0.23 0.59 60 10 1.1 1.15 12.0 0.980 4.800 4.800 A7
ASMD050F 0.37 0.37 0.98 60 10 1.7 1.95 20.0 0.290 1.400 1.400 A7
ASMD075F 0.60 0.60 1.48 30 40 1.1 3.00 20.0 0.290 1.000 1.000 A7
ASMD100F 0.90 0.90 2.16 30 40 1.1 4.50 20.0 0.098 0.480 0.480 A7
ASMD125F 1.04 1.04 2.46 16 40 1.1 5.20 20.0 0.057 0.250 0.250 A7
ASMD150F 1.27 1.27 2.95 16 40 1.2 6.35 25.0 0.049 0.250 0.250 A7
ASMD200F 1.73 1.73 3.93 16 40 1.2 8.65 30.0 0.050 0.120 0.120 A7
ASMD250F 1.97 1.97 5.00 16 40 1.2 9.85 30.0 0.035 0.085 0.085 A7
BD
14V — Bladed Device
NEW BD280-1130-10/16 8 8 13 14 100 4.4 40 8 0.0095 0.0185 0.0185 A13
NEW BD280-1130-15/16 12 12 20 14 100 4.5 60 8 0.0050 0.0070 0.0070 A13
NEW BD280-1130-20/16 16 16 26 14 100 5.2 80 10 0.0028 0.0064 0.0064 A13
NEW BD280-1927-25/16-W 20 20 32 14 100 6.0 100 13 0.0024 0.0042 0.0042 A14
NEW BD280-1927-30/16-W 21 21 38 14 100 6.2 120 13 0.0021 0.0043 0.0043 A14
Notes:
IH : Hold current: maximum current device will pass without interruption in 25°C, unless otherwise specified (20°C for ASMD).
IT : Trip current: minimum current that will switch the device from low resistance to high resistance in 25°C still air, unless otherwise specified.
VMAX : Maximum voltage device can withstand without damage at rated current.
PD : Power dissipated from device when in the tripped state in 25°C still air, unless otherwise specified.
RMIN : Minimum resistance of device as supplied at 25°C, unless otherwise specified.
R1MAX : Maximum resistance of device when measured one hour post reflow (surface-mount device) or one hour post trip (radial-leaded device) at 25°C unless otherwise specified.
RaMAX : Maximum functional resistance of device after being subjected to the stresses described in PS400 at 25°C, unless otherwise specified.
RaMIN : Minimum functional resistance of device after being subjected to the stresses described in PS400 at 25°C, unless otherwise specified.
10

Figure A5-A14 Dimension Figures for Automotive Devices
Figure A5 Figure A6 Figure A7

A E
C C
B
F B H B G
D E D E F
G A
D A
C F
CL CL CL CL

A E
A
B
C
J
J E H
C F
CL CL CL CL

A E A E
B
B B C F I
E(x2)
G H D
D D
C F C F
CL to CL CL CL CL to CL CL CL
Figure A14
C
E(x2)
I
10
B
A
G H D

Table A4 Dimensions for Automotive Devices in Millimeters (Inches)
A B C D E F G H J
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Typ. Max. Figure
AGRF
AGRF400 — 8.9 — 14.1 — 3.0 7.6 — 4.3 5.8 1.2 — — 3.10 1.24 1.4 A5, A8,
(0.35) (0.56) (0.12) (0.3) (0.17) (0.20) (0.15) (0.120) (0.049) (0.06) A9
AGRF500 — 10.4 — 15.6 — 3.0 7.6 — 4.3 5.8 1.2 — — 3.94 1.24 1.6 A5, A8,
(0.41) (0.61) (0.12) (0.3) (0.17) (0.20) (0.05) (0.155) (0.049) (0.06) A9
AGRF600 — 10.7 — 18.4 — 3.0 7.6 — 4.3 5.8 1.2 — — 4.07 1.24 1.6 A5, A8,
(0.42) (0.73) (0.12) (0.3) (0.17) (0.20) (0.05) (0.160) (0.049) (0.06) A9
AGRF700 — 11.2 — 21.0 — 3.0 7.6 — 4.3 5.8 1.2 — — 4.49 1.24 1.7 A5, A8,
(0.44) (0.73) (0.12) (0.3) (0.17) (0.20) (0.05) (0.177) (0.049) (0.07) A9
AGRF800 — 12.7 — 22.2 — 3.0 7.6 — 4.3 5.8 1.2 — — 5.08 1.24 1.8 A5, A8,
(0.50) (0.88) (0.12) (0.3) (0.17) (0.20) (0.05) (0.200) (0.049) (0.07) A9
AGRF900 — 14.0 — 23.0 — 3.0 7.6 — 4.3 5.8 1.2 — — 5.69 1.24 2.0 A5, A8,
(0.55) (0.91) (0.12) (0.3) (0.17) (0.20) (0.05) (0.224) (0.049) (0.08) A9
AGRF1000 — 16.51 — 25.7 — 3.0 7.6 — 4.3 5.8 1.2 — — 6.96 1.24 2.0 A5, A8,
(0.65) (1.01) (0.12) (0.3) (0.17) (0.20) (0.05) (0.274) (0.049) (0.08) A9
AGRF1100 — 17.5 — 26.5 — 3.0 7.6 — 4.3 5.8 1.2 — — 7.47 1.24 2.4 A5, A8,
(0.69) (1.04) (0.12) (0.3) (0.17) (0.20) (0.05) (0.294) (0.049) (0.09) A9
AGRF1200 — 17.5 — 28.8 — 3.5 7.6 — 9.4 10.9 1.4 — — 4.83 1.45 1.5 A5, A8,
(0.69) (1.14) (0.14) (0.3) (0.37) (0.43) (0.06) (0.190) (0.057) (0.06) A9
AGRF1400 — 23.5 — 28.7 — 3.5 7.6 — 9.4 10.9 1.4 — — 7.82 1.45 1.9 A5, A8,
(0.925) (1.13) (0.14) (0.3) (0.37) (0.43) (0.06) (0.308) (0.057) (0.07) A9
AHRF050 — 7.4 — 12.7 — 3.3 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A8, A9,
(0.29) (0.50) (0.13) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A10
AHRF070 — 6.9 — 10.8 — 3.3 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A5, A8,
(0.27) (0.43) (0.13) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A9
AHRF100 — 9.7 — 13.6 — 3.0 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A8, A9,
(0.38) (0.54) (0.12) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A10
AHRF200 — 9.4 — 14.4 — 3.0 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A8, A9,
(0.37) (0.57) (0.12) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A10
AHRF300 — 8.8 — 13.8 — 3.0 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A5, A8,
(0.35) (0.55) (0.12) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A9
AHRF400 — 10.0 — 15.0 — 3.0 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A5, A8,
(0.39) (0.59) (0.12) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A9
AHRF450 — 10.4 — 15.6 — 3.0 7.6 — 4.3 5.8 1.2 — — 3.94 1.24 1.6 A5, A8,
(0.41) (0.61) (0.12) (0.30) (0.17) (0.23) (0.05) (0.155) (0.049) (0.06) A9
AHRF550 — 11.2 — 18.9 — 3.0 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A5, A8,
(0.44) (0.74) (0.12) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A9
AHRF600 — 11.2 — 21.0 — 3.0 7.6 — 4.3 5.8 1.2 — — 4.49 1.24 1.7 A5, A8,
10 (0.44) (0.73) (0.12) (0.30) (0.17) (0.23) (0.05) (0.177) (0.049) (0.07) A9
AHRF650 — 12.7 — 22.2 — 3.0 7.6 — 4.3 5.8 1.2 — — 5.08 1.24 1.8 A5, A8,
(0.50) (0.88) (0.12) (0.30) (0.17) (0.23) (0.05) (0.200) (0.049) (0.07) A9
AHRF700 — 14.0 — 21.9 — 3.0 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A5, A8,
(0.55) (0.86) (0.12) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A9
AHRF750 — 14.0 — 23.5 — 3.0 7.6 — 4.3 5.8 1.2 — — 5.69 1.24 2.0 A5, A8,
(0.55) (0.93) (0.12) (0.30) (0.17) (0.23) (0.05) (0.224) (0.049) (0.08) A9
AHRF800 — 16.5 — 22.5 — 3.0 7.6 — 4.3 5.8 1.2 — — — 1.24 1.6 A5, A8,
(0.65) (0.88) (0.12) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) A9
AHRF900 — 16,5 — 25.7 — 3.0 7.6 — 4.3 5.8 1.2 — — — — — A5, A8,
(0.65) (1.01) (0.12) (0.30) (0.17) (0.23) (0.05) A9
AHRF1000 — 17.5 — 26.5 — 3.0 7.6 — 9.4 10.9 1.2 — — 7.47 1.24 1.5 A5, A8,
(0.69) (1.04) (0.12) (0.30) (0.37) (0.43) (0.05) (0.294) (0.049) (0.06) A9
AHRF1100 — 21.0 — 26.1 — 3.0 7.6 — 9.4 10.9 1.2 — — — 1.24 1.6 A5, A8,
(0.83) (1.03) (0.12) (0.30) (0.37) (0.43) (0.05) (0.049) (0.06) A9

Table A4 Dimensions for Automotive Devices in Millimeters (Inches) Cont’d
A B C D E F G H J
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Typ. Max. Figure
AHRF1300 — 23.5 — 28.7 — 3.5 7.6 — 9.4 10.9 1.4 — — 7.82 1.45 1.9 A5, A8,
(0.925) (1.13) (0.14) (0.30) (0.37) (0.43) (0.06) (0.308) (0.057) (0.08) A9
AHRF1400 — 23.5 — 28.7 — 3.6 7.6 — 9.4 10.9 1.4 — — — 1.24 1.6 A5, A8,
(0.93) (1.13) (0.14) (0.30) (0.37) (0.43) (0.06) (0.049) (0.06) A9
AHRF1500 — 23.5 — 28.7 — 3.5 7.6 — 9.4 10.9 1.4 — — 7.82 — — A5, A8,
(0.93) (1.13) (0.14) (0.30) (0.37) (0.43) (0.06) (0.308) A9
AHEF050 — 7.4 — 12.7 4.3 5.8 7.6 — — 3.3 — — — — — — A8, A9,
(0.29) (0.50) (0.17) (0.23) (0.30) (0.13) A10
AHEF070 — 6.9 — 10.8 4.3 5.8 7.6 — — 3.0 — — — — — — A8, A9,
(0.27) (0.43) (0.17) (0.23) (0.30) (0.12) A11
AHEF100 — 9.7 — 13.6 4.3 5.8 7.6 — — 3.0 — — — — — — A8, A9,
(0.38) (0.54) (0.17) (0.23) (0.30) (0.12) A10
AHEF300 — 10.2 — 15.5 4.32 5.84 7.6 — — 3.8 — — — — — — A8, A9,
(0.40) (0.61) (0.17) (0.23) (0.30) (0.15) A12
AHEF500 — 14.0 — 24.1 4.3 5.8 11.5 — — 3.8 — — — — — — A8, A9,
(0.55) (0.95) (0.17) (0.23) (0.45) (0.15) A12
AHEF750 — 21.1 — 24.9 9.4 10.9 7.6 — — 3.8 — — — — — — A8, A9,
(0.83) (0.98) (0.37) (0.43) (0.30) (0.15) A12
AHEF1000 — 23.5 — 27.9 9.4 10.9 7.6 — — 4.0 — — — — — — A8, A9,
(0.93) (1.10) (0.37) (0.43) (0.30) (0.16) A12
A B C D E F G H
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figure
AHS080-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — — A6
(0.186) (0.214) (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018)
AHS160 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 — A7
(0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
AHS200 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 — A7
(0.315) (0.370) (0.118) (0.240) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
AHS300 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 — A7
(0.315) (0.370) (0.118) (0.240) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
ASMD
ASMD030F 6.73 7.98 — 3.18 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 — A7
(0.265) (0.314) (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
ASMD050F 6.73 7.98 — 3.18 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 — A7
(0.265) (0.314) (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
ASMD075F 6.73 7.98 — 3.18 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 — A7 10
(0.265) (0.314) (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
ASMD100F 6.73 7.98 — 3.00 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 — A7
(0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
ASMD125F 6.73 7.98 — 3.00 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 — A7
(0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
ASMD150F 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 — A7
(0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
ASMD200F 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 — A7
(0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
ASMD250F 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 — A7
(0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)

Table A4 Dimensions for Automotive Devices in Millimeters (Inches) Cont’d
A B C D E(x2) F G H I
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figure
BD
14V — Bladed Device
NEW BD280-1130-10/16 29.50 30.10 8.70 9.30 10.75 11.25 6.05 6.65 2.55 3.05 3.30 3.90 3.40 4.00 1.70 2.30 10.90 11.50 A13
(1.173) (1.185) (0.343) (0.366) (0.423) (0.443) (0.238) (0.262) (0.100) (0.120) (0.130) (0.154) (0.134) (0.157) (0.067) (0.091) (0.429) (0.453)
NEW BD280-1130-15/16 29.50 30.10 8.70 9.30 10.75 11.25 6.05 6.65 2.55 3.05 3.30 3.90 3.40 4.00 1.70 2.30 10.90 11.50 A13
(1.173) (1.185) (0.343) (0.366) (0.423) (0.443) (0.238) (0.262) (0.100) (0.120) (0.130) (0.154) (0.134) (0.157) (0.067) (0.091) (0.429) (0.453)
NEW BD280-1130-20/16 29.50 30.10 8.70 9.30 10.75 11.25 6.05 6.65 2.55 3.05 3.30 3.90 3.40 4.00 1.70 2.30 10.90 11.50 A13
(1.173) (1.185) (0.343) (0.366) (0.423) (0.443) (0.238) (0.262) (0.100) (0.120) (0.130) (0.154) (0.134) (0.157) (0.067) (0.091) (0.429) (0.453)
NEW BD280-1927-25/16-W 26.65 27.35 8.60 9.20 10.75 11.25 6.05 6.65 2.55 3.05 1.80 2.20 3.50 3.90 1.70 2.30 19.00 19.40 A14
(1.049) (1.077) (0.339) (0.362) (0.423) (0.443) (0.238) (0.262) (0.100) (0.120) (0.071) (0.087) (0.138) (0.154) (0.067) (0.091) (0.748) (0.764)
NEW BD280-1927-30/16-W 26.65 27.35 8.60 9.20 10.75 11.25 6.05 6.65 2.55 3.05 1.80 2.20 3.50 3.90 1.70 2.30 19.00 19.40 A14
(1.049) (1.077) (0.339) (0.362) (0.423) (0.443) (0.238) (0.262) (0.100) (0.120) (0.071) (0.087) (0.138) (0.154) (0.067) (0.091) (0.748) (0.764)
Figure A15-A20 Typical Time-to-trip at 25°C for Automotive Devices
AGRF Figure A15

A = AGRF400 1000
A B C D EF G H I J
B = AGRF500
C = AGRF600
100
D = AGRF700
E = AGRF800
10
F = AGRF900
Time-to-trip (s)
G = AGRF1000 J
1 I
H = AGRF1100 H
G
I = AGRF1200 F
E
J = AGRF1400 0.10
D
C
0.01 B
A
0.001
1 10 100
Fault Current (A)
Figure A16
AHRF
10 A = AHRF050 K = AHRF700 1000
C D E F G H I J K LM N O P Q RS
B = AHRF070 L = AHRF750
C = AHRF100 M = AHRF800 B
100
D = AHRF200 N = AHRF900
E = AHRF300 O = AHRF1000 A
Time-to-trip (s)
F = AHRF400 P = AHRF1100 10
G = AHRF450 Q = AHRF1300
S
H = AHRF550 R = AHRF1400 R
Q
1 P
I = AHRF600 S = AHRF1500 O
N
J = AHRF650 M
L
K
0.10 J
I
H
G
0.01 F
1 10 A B C D E 100
Fault Current (A)

Figure A15-A20 Typical Time-to-trip at 25°C for Automotive Devices Cont’d
AHEF Figure A17

A = AHEF050 1000
B = AHEF070
C = AHEF100
E
D = AHEF300 100
G
F
E = AHEF500 B C
A D
F = AHEF750
Time-to-trip (s)
10
G = AHEF1000
1 G
F
E
0.1
D
0.01
1 10 A B C 100
Fault Current (A)
AHS Figure A18

A = AHS080-2018 100
B = AHS160
B
C = AHS200 C
D
D = AHS300 A
10
Time-to-trip (s)
0.10
0.01
1 10 A B C D 100
Fault Current (A)
ASMD Figure A19

A = ASMD030F
B = ASMD050F
100
A B C D E FG H
10
C = ASMD075F
10
D = ASMD100F
E = ASMD125F
F = ASMD150F
Time-to-trip (s)
1
G = ASMD200F
H = ASMD250F
0.10
H
B
G
0.01 A
F
E
C
D
0.001
0.1 1 10 100
Fault Current (A)

Figure A15-A20 Typical Time-to-trip at 25°C for Automotive Devices Cont’d
BD Figure A20
A = BD30A 1000
B = BD25A
C = BD20A
C A
D = BD15A 100
D B
E
E = BD10A
Time-to-trip (s)
10
A
1 B
C
D
0.1
0.01
0 20 40 60 80 100 120 140 160 180 200
Fault Current (A)
Table A5 Physical Characteristics and Environmental Specifications for Automotive Devices
AGRF
Lead material AGRF400 to AGRF1100 : Tin Plated Copper, 0.52mm2 (20AWG) ø 0.8 mm/0.032in
AGRF1200 to AGRF1400 : Tin Plated Copper, 0.82mm2 (18AWG) ø 1.0mm/0.040in
Solder heat withstand AGRF400: per IEC68-2-20 Test Tb, Method 1A, Condition A: can withstand 5 seconds at 260°C ± 5°C
AGRF500-AGRF1400: per IEC68-2-20 Test Tb, Method 1A, Condition B: can withstand 10 seconds at 260°C ± 5°C
10 Insulating material Cured, flame-retardant epoxy polymer; meets UL 94V-0
Note: See PS400 for other physical characteristics.
Devices are not designed to be placed through a reflow process.
85°C, 1000 hours ±5%
Humidity aging 85°C, 85% RH, 1000 hours ±5%
Note: See PS400 for other environmental specifications.

Table A5 Physical Characteristics and Environmental Specifications for Automotive Devices Cont’d
AHRF
Lead material AHRF050 to AHRF200 : Tin-plated Copper Clad Steel, 0.205mm2 (24 AWG), ø 0.51mm/0.020in
AHRF300 to AHRF1100 : Tin-plated copper 0.52mm2 (20 AWG), ø 0.81mm/0.032 in
AHRF1300 to AHRF1500 : Tin-plated copper 0.82mm2 (18 AWG), ø 1.0mm/0.04 in
Soldering characteristics Solderability per ANSI/J-STD 002 Category 3
Solder heat withstand per IEC 68-2-20, Test Tb, Method 1A, Condition B; can withstand 10 seconds at 260°C ± 5°C
Insulating material Cured, flame-retardant epoxy polymer; meets UL 94V-0 requirements
85°C, 1000 hours ±5%
AHEF
Lead material AHEF050 to AHEF100 : Tin-plated Copper Clad Steel, 0.205mm2 (24 AWG), ø 0.51mm/0.020in.
AHEF300 to AHEF750 : Tin-plated Copper 0.52mm2 (20 AWG), ø 0.81mm/0.032in
AHEF1000 : Tin-plated copper 0.82mm2 (18 AWG), ø 1.0mm/0.04 in
Soldering characteristics Solderability per ANSI/J-STD 002 Category 3
Solder heat withstand per IEC 68-2-20, Test Tb, Method 1A, Condition B; can withstand 10 seconds at 260°C ± 5°C
Insulating material Cured, flame-retardant epoxy polymer; meets UL 94V-0 requirements
85°C, 1000 hours ±5%
AHS
Physical Characteristics 10
Lead material Tin-plated brass to MIL-T-10727B
Soldering characteristics Solderability per ANSI-J-STD-002 Category 1
Solder heat withstand per IEC-STD 68-2-20, Test Tb, Section 5, Method 1A
Flammability per IEC 695-2-2 Needle flame test for 20 seconds
Passive aging 70°C, 1000 hours ±3% Typical
85°C, 1000 hours ±5% Typical
Humidity aging 85°C, 85% RH, 1000 hours ±1.2% Typical
Thermal shock 125°C, -40°C (20 times) -33% Typical
Solvent resistance Freon No change

Table A5 Physical Characteristics and Environmental Specifications for Automotive Devices Cont’d
ASMD
Terminal pad material 98%+ Tin-plated Brass

Soldering characteristics Solderability per ANSI-J-STD-002 Category 1
Solder heat withstand per IEC-STD 68-2-20, Test Tb, Section 5, Method 1A
Flammability resistance per IEC 695-2-2 Needle flame test for 20 seconds
Recommended storage conditions 40°C max, 70% RH max; devices may not meet specified ratings if storage conditions are exceeded
Passive aging 60°C, 1000 hours ±3% typical
Humidity aging 85°C, 85% RH, 100 hours ±1.2% typical
Thermal shock 85°C, -40°C (20 times) -33% typical
125°C, -55°C (10 times) -33% typical
Solvent resistance Freon No change
BD
Lead material Brass H65, thickness: 0.8mm , tin plating thickness: 5µm
Soldering characteristics NA
Solder heat withstand NA
Insulating material Colored PBT, meets UL94V-0 requirements
Humidity aging 85°C, 85% RH,1000 hours ±5%
85°C, 85% RH (with 10% IHOLD), 500 hours ±5%
Thermal shock 85°C to -40°C (5 times) meet SCD
10

Table A6 Packaging and Marking Information for Automotive Devices

AGRF
Radial-leaded
AGRF400 500 — — 10,000 GF4 *
AGRF400-2 — 2,500 — 12,500 GF4 *
AGRF400-AP — — 2,000 10,000 GF4 *
AGRF500 500 — — 10,000 GF5 *
AGRF500-2 — 2,000 — 10,000 GF5 *
AGRF500-AP — — 2,000 10,000 GF5 *
AGRF600 500 — — 10,000 GF6 *
AGRF600-2 — 2,000 — 10,000 GF6 *
AGRF600-AP — — 2,000 10,000 GF6 *
AGRF700 500 — — 10,000 GF7 *
AGRF700-2 — 1,500 — 7,500 GF7 *
AGRF700-AP — — 1,500 7,500 GF7 *
AGRF800 500 — — 10,000 GF8 *
AGRF800-2 — 1,000 — 5,000 GF8 *
AGRF800-AP — — 1,000 5,000 GF8 *
AGRF900 500 — — 10,000 GF9 *
AGRF900-2 — 1,000 — 5,000 GF9 *
AGRF900-AP — — 1,000 5,000 GF9 *
AGRF1000 250 — — 5,000 GF10 *
AGRF1000-2 — 1,000 — 5,000 GF10 *
AGRF1000-AP — — 1,000 5,000 GF10 *
AGRF1100 250 — — 5,000 GF11 *
AGRF1100-2 — 1,000 — 5,000 GF11 *
AGRF1100-AP — — 1,000 5,000 GF11 *
AGRF1200 250 — — 5,000 GF12 *
AGRF1200-2 — 1,000 — 5,000 GF12 *
AGRF1200-AP — — 1,000 5,000 GF12 *
AGRF1400 250 — — 5,000 GF14 *
AGRF1400-2 — 1,000 — 5,000 GF14 *
AGRF1400-AP — — 1,000 5,000 GF14 *
Radial-leaded
AHRF050 500 — — 10,000 HF0.5 *
AHRF050-2 — 2,500 — 12,500 HF0.7 *
AHRF050-AP — — 2,500 12,500 HF0.7 *
AHRF070 500 — — 10,000 HF0.7 *
AHRF070-2 — 2,500 — 12,500 HF0.7 *
AHRF070-AP — — 2,500 12,500 HF0.7 *
AHRF100 500 — — 10,000 HF1.0 *
10
AHRF100-2 — 2,500 — 12,500 HF1.0 *
AHRF100-AP — — 2,500 12,500 HF1.0 *
AHRF200 500 — — 10,000 HF2 *
AHRF200-2 — 2,500 — 12,500 HF2 *
AHRF200-AP — — 2,500 12,500 HF2 *
AHRF300 500 — — 10,000 HF3 *
AHRF300-2 — 2,000 — 10,000 HF3 *
AHRF300-AP — — 2,000 10,000 HF3 *
AHRF400 500 — — 10,000 HF4 *
AHRF400-2 — 1,500 — 7,500 HF4 *
AHRF400-AP — — 1,500 7,500 HF4 *
* These devices have been designed for use in automotive applications.
For commercial alternatives to these product series please see the radial-leaded devices section or surface-mount devices section.

Table A6 Packaging and Marking Information for Automotive Devices Cont’d

Radial-leaded
AHRF450 500 — — 10,000 HF4.5 *
AHRF450-2 — 1,500 — 7,500 HF4.5 *
AHRF450-AP — — 1,500 7,500 HF4.5 *
AHRF550 500 — — 10,000 HF5.5 *
AHRF550-2 — 2,000 — 10,000 HF5.5 *
AHRF550-AP — — 2,000 10,000 HF5.5 *
AHRF600 500 — — 10,000 HF6 *
AHRF600-2 — 2,000 — 10,000 HF6 *
AHRF600-AP — — 2,000 10,000 HF6 *
AHRF650 500 — — 10,000 HF6.5 *
AHRF650-2 — 1,500 — 7,500 HF6.5 *
AHRF650-AP — — 1,500 7,500 HF6.5 *
AHRF700 500 — — 10,000 HF7 *
AHRF700-2 — 1,500 — 7,500 HF7 *
AHRF700-AP — — 1,500 7,500 HF7 *
AHRF750 500 — — 10,000 HF7.5 *
AHRF750-2 — 1,000 — 5,000 HF7.5 *
AHRF750-AP — — 1,000 5,000 HF7.5 *
AHRF800 500 — — 10,000 HF8 *
AHRF800-2 — 1,000 — 5,000 HF8 *
AHRF800-AP — — 1,000 5,000 HF8 *
AHRF900 250 — — 5,000 HF9 *
AHRF900-2 — 1,000 — 5,000 HF9 *
AHRF900-AP — — 1,000 5,000 HF9 *
AHRF1000 250 — — 5,000 HF10 *
AHRF1000-2 — 1,000 — 5,000 HF10 *
AHRF1000-AP — — 1,000 5,000 HF10 *
AHRF1100 250 — — 5,000 HF11 *
AHRF1100-2 — 1,000 — 5,000 HF11 *
AHRF1100-AP — — 1,000 5,000 HF11 *
AHRF1300 250 — — 5,000 HF13 *
AHRF1300-2 — 1,000 — 5,000 HF13 *
AHRF1300-AP — — 1,000 5,000 HF13 *
AHRF1400 250 — — 5,000 HF14 *
AHRF1400-2 — 1,000 — 5,000 HF14 *
AHRF1400-AP — — 1,000 5,000 HF14 *
AHRF1500 250 — — 5,000 HF15 *
10 AHRF1500-2
AHRF1500-AP
—
—
1,000
—
—
1,000
5,000
5,000
HF15
HF15
*
*
Radial-leaded
AHEF050 500 — — 10,000 EF0.5 *
AHEF070 500 — — 10,000 EF0.7 *
AHEF100 500 — — 10,000 EF1.0 *
AHEF300 500 — — 10,000 EF3 *
AHEF500 250 — — 5,000 EF5 *
AHEF750 250 — — 5,000 EF7.5 *
AHEF1000 250 — — 5,000 EF10 *

Table A6 Packaging and Marking Information for Automotive Devices Cont’d
Recommended Pad Layouts [mm(in) See Figure A21]

Tape & Reel Standard Package Part Dimension Dimension Dimension Agency
Part Number Quantity Quantity Marking A (Min.*/Nom.) B (Nom.) C (Nom.) Recognition
Surface-mount
AHS080-2018 4,000 20,000 H08 4.6 (0.18) 1.5 (0.06) 3.4 (0.134) *
AHS160 1,500 7,500 160 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) *
AHS200 1,500 7,500 H200 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) *
AHS300 1,500 7,500 H300 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) *
ASMD
Surface-mount
ASMD030F 2,000 10,000 030F 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) *
ASMD050F 2,000 10,000 050F 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) *
ASMD075F 2,000 10,000 075F 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) *
ASMD100F 2,000 10,000 100F 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) *
ASMD125F 2,000 10,000 125F 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) *
ASMD150F 1,500 7,500 150F 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) *
ASMD200F 1,500 7,500 200F 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) *
ASMD250F 1,500 7,500 250F 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) *
Bag Standard Package

Part Number Quantity Quantity Part Marking Agency Recognition
BD
Bladed Device
NEW BD280-1130-10/16 200 1600 BD280-1130-10 *
NEW BD280-1130-15/16 200 1600 BD280-1130-15 *
NEW BD280-1130-20/16 200 1600 BD280-1130-20 *
NEW BD280-1927-25/16-W 200 1600 BD280-1927-25 *
NEW BD280-1927-30/16-W 200 1600 BD280-1927-30 *
Figure A21 Recommended Pad Layout for Automotive Devices
10
A
B C B

Table A7 Tape and Reel Specifications for AGRF/AHRF/AHEF Automotive Devices
AGRF, AHRF and AHEF devices are available in tape and reel packaging per EIA468-B/IEC286-2 and EIA 481-2 standards.
See Figures A22 and A23 for details.
Carrier tape width W 18.0 -0.5/+1.0
Hold down tape width W4 11.0 Minimum
Top distance between tape edges W6 3.0 Maximum
Sprocket hole position W5 9.0 -0.5/+0.75
Sprocket hole diameter D0 4.0 ±0.2
Abscissa to plane H0 16.0 ±0.5
Abscissa to top H1 32.2 Maximum
(AGRF400 to AGRF600, AHRF050 to AHRF450, AHEF050 to AHEF300)
Abscissa to top H1 45.0 Maximum
(AGRF700 to AGRF1400, AHRF550 to AHRF1500*, AHEF500 to AHEF1000)
Overall width with lead protrusion C1 43.2 Maximum
(AGRF400 to AGRF600 & AHRF050 to AHRF450, AHEF050 to AHEF300)
Overall width with lead protrusion C1 55.0 Maximum
Overall width without lead protrusion C2 42.5 Maximum
Overall width without lead protrusion C2 54.0 Maximum
Device pitch (AGRF400 to AGRF700, AHRF050 to AHRF600, AHEF050 to AHEF300) — 12.7 ± 0.3
Device pitch (AGRF800 to AGRF1400, AHRF650 to AHRF1500, AHEF500 to AHEF1000) — 25.4 ± 0.6
Pitch tolerance — 20 consec. ± 0.1
Overall tape and lead thickness t1 2.0 Maximum
(AGRF400 to AGRF1100, AHRF050 to AHRF1100*, AHEF050 to AHEF750)
Overall tape and lead thickness t1 2.3 Maximum
(AGRF1200 to AGRF1400, AHRF1300 to AHRF1500*, AHEF1000)
Lead spacing (AGRF400 to AGRF1100, AHRF050 to AHRF900*, AHEF050 to AHEF500) F 5.05 ± 0.75
Lead spacing (AGRF1200 to AGRF1400, AHRF1000 to AHRF1500*, AHEF750 to AHEF1000) F 10.15 ± 0.75
10 Reel width (AGRF400 to AGRF600 & AHRF050 to AHRF450, AHEF050 to AHEF300) w2 56.0 Maximum
Reel width (AGRF700 to AGRF1400, AHRF550 to AHRF1500*, AHEF500 to AHEF1000) w2 63.5 Maximum
Space between flanges* (AHEF050 to AHEF300) w1 48.0 Maximum
Space between flanges* (AHEF500 to AHEF1000) w1 55.0 Maximum
Arbor hold diameter c 26.0 ±12.0

Figure A22 EIA Referenced Taped Component Dimensions for AGRF/AHRF/AHEF Automotive Devices
Dh Dh Dp Dp
Reference plane
H1 P1 H1 C2
F H C1
L A B H0
W5
W4
W
I2
Cross section A-B
Figure A23 EIA Referenced Reel Dimensions for AGRF/AHRF/AHEF Automotive Devices
Reel
Upper side
n
Type
a Direction of
unreeling
Lower side
c
w1
Cross section
w2
Table A8 Tape and Reel Specifications for AHS/ASMD Automotive Devices

AHS and ASMD devices are available in tape and reel packaging per EIA 468-2 standards. See Figures A24 and A25 for details.

Carrier tape width W 16.0 ± 0.3
Embossed cavity pitch (ASMD030F to ASMD125F & AHS080-2018)
Embossed cavity pitch (ASMD150F to ASMD250F & AHS160 to AHS300)
P1
P1 12.0
8.0 ± 0.10
± 0.10
10
Ordinate to embossed cavity center P2 2.0 ± 0.10
Embossed cavity length (inside) (AHS080-2018) A0 5.11 ± 0.15
Embossed cavity length (inside) (ASMD030F to ASMD125F) A0 5.6 ± 0.23
Embossed cavity length (inside) (ASMD150F to ASMD250F & AHS160 to AHS300) A0 6.9 ± 0.23
Embossed cavity width (inside) (AHS080-2018) B0 5.6 ± 0.23
Embossed cavity width (inside) (ASMD030F to ASMD125F) B0 8.1 ± 0.15
Embossed cavity width (inside) (ASMD150F to ASMD250F & AHS160 to AHS300) B0 9.6 ± 0.15
Embossed cavity length (outside) B1 max. 12.1 —
Sprocket hole diameter D0 1.5 + 0.1, -0
Abscissa to embossed cavity center F 7.5 ± 0.10
Sprocket hole location E1 1.75 ± 0.10
Sprocket hole location (across embossed cavity) E2 min. 14.25 —

Table A8 Tape and Reel Specifications for AHS/ASMD Automotive Devices Cont’d

Carrier tape thickness T max. 0.6 —
Cover tape thickness T1 max. 0.1 —
(AHS080-2018) K0 1.8 ± 0.15
(ASMD030F to ASMD125F) K0 3.2 ± 0.15
(ASMD150F to ASMD250F & AHS160 to AHS300) K0 3.4 ± 0.15
Embossed cavity depth (inside) K0 — ± 0.15
Leader min. — 400 —
Trailer min. — 160 —
Reel diameter A max. 330 —
Core diameter N min. 50 —
Reel width measured at inside hub W1 16.4 + 2.0, -0
Reel width measured at outside hub W2 max. 22.4 —
Figure A24 EIA Referenced Taped Component Dimensions for AHS/ASMD Devices
Embossment
P0
T D0 P2
E1
Cover tape
A0
F
W
E2
B1 K0 B0
T1 P1
Center lines
of cavity
Figure A25 EIA Referenced Reel Dimensions for AHS/ASMD Devices
10 W2 (measured at hub)
A N (hub dia.)
Cover tape
Carrier tape
Embossed cavity

Part Numbering System for Automotive Devices
AGRF 800 -2
Packaging option
(Blank) = Bulk
2 = Tape and reel packaging
AP = Ammo pack
Product Series
An “F” at the end of the series
indicates Pb-free version of product
AHS 080 -2
Packaging
2 = Tape and reel
Product Series
BD280 -1130 -10/16
Rating Current / Maximum Operating Voltage

10 = Rating current (hold current of BD device is 70%~80% of rating current)
16 = Max operating voltage is 16V (nominal operating voltage of BD device is 14V)
Typical Cap’s Size
Product Series
10
Warning :

10
170
PolySwitch Resettable Devices – Strap Battery Devices
Strap Battery Devices
Tyco Electronics, a pioneer of polymeric positive
temperature coefficient resettable devices, has developed
several material platforms to help protect battery
applications. Each of these material platforms offers
different performance characteristics, allowing the
engineer greater design flexibility. PolySwitch devices
for battery protection include SRP, LTP, LR4, VTP, VLP,
VLR and MXP series, disc, and special application strap
devices.
Benefits Features
• Many material platforms and device form factors • RoHS compliant
give engineers more design flexibility • Lead free versions of all devices are available
• Compatible with high-volume electronics assembly • Broad range of resettable devices available
• Assists in meeting regulatory requirements • Current ratings from 0.7A to 13A
• Low resistance devices increase battery operating • Voltage ratings from 6V to 30V
time
• Agency recognition, UL, CSA, TÜV
• Low resistance
10
Applications
• Mobile phone battery packs • Camcorder battery packs
• Cordless phone battery packs • Portable music player battery packs
• Mobile radio battery packs • Power tools (charge line)
• Computer battery packs
171
Application Selection Guide for Strap Battery Devices
The guide below lists PolySwitch strap battery devices which are typically used in these applications.
The following pages contain the specifications for the part numbers recommended below.
Once a device is selected, the user should evaluate and test each product for its intended application.
PolySwitch Resettable Devices — Key Device Selection Criteria

Protection Application Additional Comments Installation Method Lowest Resistance Lowest Thermal Cut-off
Mobile phone battery packs Li-ion Flexprint miniSMDE190F ––
Surface Mount refer to Surface-mount section of this catalog
Prismatic MXP190BB VLR175F
Cordless phone battery packs NiMH Cylindrical VLP210F VTP170F
SRP175F
Mobile radio battery packs NiMH Cylindrical LR4-380F LTP340F
SRP350F
Computer battery packs NiMH Cylindrical LR4-900F ––
Li-ion Cylindrical LR4-1300SSF ––
Prismatic Consult local Rep Consult local Rep
Camcorder battery packs NiMH or Li-ion Prismatic VLP270F VTP210GF
LR4-380F ––
PDA battery packs Li-ion Prismatic VLP220F VLR175F
VTP175F ––
Power tools (charge line) NiCd, NiMH or Li-ion Cylindrical custom LR4 custom VTP

Table B1
Strap Battery Devices
VLR VLP VTP LTP MXP SRP LR4 miniSMDE
Hold Typical Activation Temperature

Current (A) 85°C 90°C 90°C 110°C 120°C 125°C 125°C 110°C
0.70 — — — 15V/0.150Ω — — — —
1.00 — — — 24V/0.100Ω — — — —
1.10 — — 16V/0.054Ω — — — — —
1.20 — — — — — 15V/0.123Ω — —
1.70 12V/0.025Ω — 16V/0.041Ω — — — — —
1.75 12V/0.024Ω — 16V/0.040Ω — — 15V/0.070Ω — —
1.80 — — — 24V/0.054Ω — — — —
1.90 — — — 24V/0.044Ω 6V/0.010Ω — 15V/0.056Ω 16V/0.032Ω
2.00 — — — — — 30V/0.045Ω — —
2.10 — 16V/0.024Ω 16V/0.024Ω — — — — —
2.20 — 16V/0.023Ω — — — — — —
2.30 12V/0.015Ω — — — — — — —
10 2.40 — — — — — — — —
2.60 — — — 24V/0.034Ω — — 15V/0.031Ω —
2.70 — 16V/0.015Ω — — — — — —
3.00 — — — — — — — —
3.40 — — — 24V/0.022Ω — — — —
3.50 — — — — — 30V/0.024Ω — —
3.80 — — — — — — 15V/0.020Ω —
4.20 — — — — — 30V/0.018Ω — —
4.50 — — — — — — 20V/0.016Ω —
5.50 — — — — — — 20V/0.013Ω —
6.00 — — — — — — 20V/0.011Ω —
7.30 — — — — — — 20V/0.009Ω —
8.80 — — — — — — — —
9.00 — — — — — — 20V/0.008Ω —
13.00 — — — — — — 20V/0.006Ω —

Thermal Derating for Strap Battery Devices
Table B2
-40°C -20°C 0°C 20°C 25°C 40°C 50°C 60°C 70°C 80°C 85°C
Part Number Amps
85°C Typical Activation
VLR*
VLR170F 3.5 2.9 2.4 1.84 1.70 1.2 1.0 0.7 0.3 — —
VLR170LF 3.5 2.9 2.4 1.84 1.70 1.2 1.0 0.7 0.3 — —
VLR170UF 3.5 2.9 2.4 1.84 1.70 1.2 1.0 0.7 0.3 — —
VLR175F 3.5 2.9 2.4 1.87 1.75 1.3 1.0 0.8 0.3 — —
VLR175LF 3.5 2.9 2.4 1.87 1.75 1.3 1.0 0.8 0.3 — —
VLR175UF 3.5 2.9 2.4 1.87 1.75 1.3 1.0 0.8 0.3 — —
VLR230F 5.0 4.2 3.4 2.52 2.30 1.7 1.3 0.9 0.4 — —
VLP*
VLP210F 4.3 3.6 2.9 2.31 2.10 1.6 1.3 1.0 0.6 0.3 0.1
VLP220F 4.5 3.8 3.0 2.45 2.20 1.7 1.4 1.1 0.7 0.3 0.1
VLP270F 5.6 4.7 4.0 3.05 2.70 2.2 1.7 1.4 0.9 0.4 0.1
VTP*
VTP110F 2.0 1.7 1.4 1.12 1.10 0.85 0.75 0.7 0.4 0.2 0.1
VTP170F 3.2 2.7 2.2 1.80 1.70 1.3 1.0 0.8 0.5 0.3 0.1
VTP170SSF 3.2 2.7 2.2 1.80 1.70 1.3 1.0 0.8 0.5 0.3 0.1
VTP170XF 3.2 2.7 2.2 1.80 1.70 1.3 1.0 0.8 0.5 0.3 0.1
VTP170XSF 3.2 2.7 2.2 1.80 1.70 1.3 1.0 0.8 0.5 0.3 0.1
VTP175F 3.2 2.7 2.2 1.84 1.75 1.3 1.0 0.8 0.5 0.3 0.1
VTP175LF 3.2 2.7 2.2 1.84 1.75 1.3 1.0 0.8 0.5 0.3 0.1
VTP175UF 3.2 2.7 2.2 1.84 1.75 1.3 1.0 0.8 0.5 0.3 0.1
VTP210GF 4.1 3.5 2.9 2.26 2.10 1.6 1.3 1.0 0.7 0.4 0.1
VTP210SF 4.1 3.5 2.9 2.26 2.10 1.6 1.3 1.0 0.7 0.4 0.1
VTP210SLF 4.1 3.5 2.9 2.26 2.10 1.6 1.3 1.0 0.7 0.4 0.1
LTP
LTP070F 1.1 1.0 0.8 0.7 0.65 0.5 0.4 0.3 0.2 0.2 0.1
LTP100SF 1.8 1.6 1.4 1.0 0.99 0.8 0.7 0.6 0.4 0.3 0.2
LTP180LF 3.1 2.6 2.2 1.8 1.67 1.3 1.1 0.9 0.6 0.4 0.3
LTP190F 3.3 2.8 2.4 1.9 1.79 1.4 1.2 1.1 0.7 0.5 0.4
LTP260F 4.3 3.7 3.1 2.6 2.42 1.9 1.6 1.4 1.1 0.8 0.6
LTP340F 5.5 4.7 4.0 3.4 3.17 2.6 2.2 1.9 1.5 1.1 0.9
miniSMDE
miniSMDE190F 3.16 2.74 2.2 1.9 1.74 1.48 1.27 1.10 0.80 0.50 0.35
MXP*
MXP190BB — — 2.6 — 1.90 — — 0.85 — — —
10
LR4
LR4-190F 2.8 2.5 2.3 1.9 1.86 1.6 1.5 1.4 1.2 1.1 1.0
LR4-260F 3.8 3.4 3.1 2.6 2.54 2.2 2.0 1.9 1.7 1.4 1.3
LR4-260SF 3.8 3.4 3.1 2.6 2.54 2.2 2.0 1.9 1.7 1.4 1.3
LR4-380F 5.4 4.9 4.4 3.8 3.64 3.3 3.0 2.8 2.5 2.3 2.1
LR4-380XF 5.4 4.9 4.4 3.8 3.64 3.3 3.0 2.8 2.5 2.3 2.1
LR4-450F 6.5 5.8 5.3 4.5 4.38 3.9 3.6 3.3 2.9 2.6 2.4
LR4-550F 7.6 6.9 6.2 5.5 5.32 4.7 4.3 4.0 3.6 3.2 3.0
LR4-600F 8.7 7.8 7.1 6.0 5.86 5.2 4.7 4.4 3.9 3.4 3.2
LR4-600XF 8.7 7.8 7.1 6.0 5.86 5.2 4.7 4.4 3.9 3.4 3.2
LR4-730F 10.5 9.5 8.6 7.3 7.13 6.3 5.7 5.4 4.7 4.2 4.0
LR4-900F 12.7 11.4 10.0 9.0 8.50 7.5 6.8 6.2 5.5 4.9 4.5
LR4-1300SSF 17.9 16.2 14.5 13.0 12.40 11.1 10.3 9.5 8.6 7.7 7.2
* Product electrical characteristics determined at 25°C.

Thermal Derating for Strap Battery Devices
Table B2

-40°C -20°C 0°C 20°C 25°C 40°C 50°C 60°C 70°C 80°C 85°C
Part Number Amps
SRP
SRP120F 1.9 1.7 1.5 1.20 1.17 1.0 0.9 0.8 0.6 0.5 0.4
SRP120LF 1.9 1.7 1.5 1.20 1.17 1.0 0.9 0.8 0.6 0.5 0.4
SRP120SF 1.9 1.7 1.5 1.20 1.17 1.0 0.9 0.8 0.6 0.5 0.4
SRP175F 2.5 2.2 2.0 1.75 1.68 1.4 1.3 1.2 1.0 0.9 0.8
SRP175LF 2.5 2.2 2.0 1.75 1.68 1.4 1.3 1.2 1.0 0.9 0.8
SRP175SF 2.5 2.2 2.0 1.75 1.68 1.4 1.3 1.2 1.0 0.9 0.8
SRP200F 3.1 2.8 2.5 2.00 1.97 1.7 1.5 1.4 1.2 1.0 0.9
SRP350F 5.3 4.8 4.3 3.50 3.44 3.0 2.7 2.5 2.1 1.8 1.7
SRP420F 6.3 5.7 5.1 4.20 4.11 3.6 3.3 3.0 2.6 2.2 2.1
Figure B1 Thermal Derating Curve for Strap Battery Devices
A = LR4 Figure B1
B = SRP
200
C = LTP E
D
180
D = VTP, VLP, MXP C
E = VLR 160
B
140 A
120
100
80
60
A
B
40
20 C
D
0
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 E 90
Temperature (˚C)
Table B3 Electrical Characteristics for Strap Battery Devices

10 Part IH IT VMAX IMAX PD Typ Max. Time-to-trip RMIN RTyp RMAX RTripped Typ R1MAX Figure for
Number (A) (A) (VDC) (A) (W) (A) (s) (Ω) (Ω) (Ω) (Ω) (Ω) Dimensions
VLR*
VLR170F 1.70 4.1 12 100 1.4 8.50 5.0 0.018 0.025 0.032 0.050 0.064 B3
VLR170LF 1.70 4.1 12 100 1.4 8.50 5.0 0.018 0.025 0.032 0.050 0.064 B3
VLR170UF 1.70 4.1 12 100 1.4 8.50 5.0 0.018 0.025 0.032 0.050 0.064 B5
VLR175F 1.75 4.2 12 100 1.4 8.75 5.0 0.017 0.024 0.031 0.048 0.062 B3
VLR175LF 1.75 4.2 12 100 1.4 8.75 5.0 0.017 0.024 0.031 0.048 0.062 B3
VLR175UF 1.75 4.2 12 100 1.4 8.75 5.0 0.017 0.024 0.031 0.048 0.062 B5
VLR230F 2.30 5.0 12 100 1.4 10.00 5.0 0.012 0.015 0.018 0.030 0.036 B3
VLP*
VLP210F 2.10 5.0 16 60 0.8 10.50 5.0 0.018 0.024 0.030 0.048 0.060 B2
VLP220F 2.20 5.3 16 60 0.8 11.00 5.0 0.017 0.023 0.029 0.046 0.058 B3
VLP270F 2.70 6.5 16 60 1.2 13.50 5.0 0.012 0.015 0.018 0.030 0.036 B3

Table B3 Electrical Characteristics for Strap Battery Devices Cont’d
Part IH IT VMAX IMAX PD Typ Max. Time-to-trip RMIN RTyp RMAX RTripped Typ R1MAX Figure for
Number (A) (A) (VDC) (A) (W) (A) (s) (Ω) (Ω) (Ω) (Ω) (Ω) Dimensions
VTP*
VTP110F 1.10 2.7 16 100 0.7 5.50 5.0 0.038 0.054 0.070 0.108 0.140 B5
VTP170F 1.70 3.4 16 100 1.0 8.50 5.0 0.030 0.041 0.052 0.082 0.105 B2
VTP170SSF 1.70 3.4 16 100 1.0 8.50 5.0 0.030 0.041 0.052 0.082 0.105 B8
VTP170XF 1.70 3.4 16 100 0.7 8.50 5.0 0.030 0.041 0.052 0.082 0.105 B3
VTP170XSF 1.70 3.4 16 100 0.7 8.50 5.0 0.030 0.041 0.052 0.082 0.105 B4
VTP175F 1.75 3.6 16 100 0.8 8.75 5.0 0.029 0.040 0.051 0.080 0.102 B3
VTP175LF 1.75 3.6 16 100 0.8 8.75 5.0 0.029 0.040 0.051 0.080 0.102 B3
VTP175UF 1.75 3.6 16 100 0.8 8.75 5.0 0.029 0.040 0.051 0.080 0.102 B5
VTP210GF 2.10 4.7 16 100 1.2 10.00 5.0 0.018 0.024 0.030 0.048 0.060 B3
VTP210SF 2.10 4.7 16 100 1.2 10.00 5.0 0.018 0.024 0.030 0.048 0.060 B4
VTP210SLF 2.10 4.7 16 100 1.2 10.00 5.0 0.018 0.024 0.030 0.048 0.060 B4
LTP
LTP070F 0.70 1.45 15 100 0.7 3.50 5.0 0.100 0.150 0.200 0.300 0.340 B6
LTP100SF 1.00 2.50 24 100 0.9 5.00 7.0 0.070 0.100 0.130 0.200 0.260 B7
LTP180LF 1.80 3.80 24 100 1.0 9.00 2.9 0.040 0.054 0.068 0.108 0.120 B6
LTP190F 1.90 4.20 24 100 1.5 10.00 3.0 0.030 0.044 0.057 0.088 0.100 B6
LTP260F 2.60 5.20 24 100 1.3 13.00 5.0 0.025 0.034 0.042 0.068 0.076 B6
LTP340F 3.40 6.80 24 100 1.6 17.00 5.0 0.016 0.022 0.027 0.044 0.050 B6
miniSMDE
miniSMDE190F 1.90 3.8 16 100 1.5 10.00 2.0 0.024 0.032 0.040 0.060 0.080† B13
MXP*
MXP190BB 1.90 4.9 6 50 0.4 9.50 2.0 0.007 0.010 0.015 0.015 0.024 B14
125˚C Typical Activation
LR4
LR4-190F 1.90 3.9 15 100 0.8 9.50 5.0 0.0390 0.0560 0.0720 0.079 0.102 B9
LR4-260F 2.60 5.8 15 100 1.0 13.00 5.0 0.0200 0.0310 0.0420 0.046 0.063 B9
LR4-260SF 2.60 5.8 15 100 1.0 13.00 5.0 0.0200 0.0310 0.0420 0.046 0.063 B10
LR4-380F 3.80 8.3 15 100 1.2 19.00 5.0 0.0130 0.0200 0.0260 0.028 0.037 B9
LR4-380XF 3.80 8.3 15 100 1.2 19.00 5.0 0.0130 0.0200 0.0260 0.028 0.037 B9
LR4-450F 4.50 8.9 20 100 1.4 22.50 5.0 0.0110 0.0160 0.0200 0.022 0.028 B9
LR4-550F 5.50 10.5 20 100 2.0 27.50 5.0 0.0090 0.0130 0.0160 0.018 0.022 B9
LR4-600F 6.00 11.7 20 100 1.7 30.00 5.0 0.0070 0.0110 0.0140 0.015 0.019 B9
LR4-600XF 6.00 11.7 20 100 1.7 30.00 5.0 0.0075 0.0120 0.0140 0.015 0.019 B9
LR4-730F 7.30 14.1 20 100 1.9 30.00 5.0 0.0060 0.0090 0.0120 0.011 0.015 B9
LR4-900F 9.00 16.7 20 100 3.0 45.00 5.0 0.0060 0.0080 0.0100 0.011 0.014 B9
LR4-1300SSF 13.00 21.2 20 100 2.2 65.00 5.0 0.0035 0.0060 0.0065 0.008 0.009 B12
SRP
SRP120F 1.20 2.7 15 100 0.8 6.00 5.0 0.085 0.123 0.160 0.170 0.220 B6
SRP120LF 1.20 2.7 15 100 0.8 6.00 5.0 0.085 0.123 0.160 0.170 0.220 B6 10
SRP120SF 1.20 2.7 15 100 0.8 6.00 5.0 0.085 0.123 0.160 0.170 0.220 B11
SRP175F 1.75 3.8 15 100 0.9 8.75 5.0 0.050 0.070 0.090 0.093 0.120 B6
SRP175LF 1.75 3.8 15 100 0.9 8.75 5.0 0.050 0.070 0.090 0.093 0.120 B6
SRP175SF 1.75 3.8 15 100 0.9 8.75 5.0 0.050 0.070 0.090 0.093 0.120 B11
SRP200F 2.00 4.4 30 100 1.6 10.00 4.0 0.030 0.045 0.060 0.075 0.100 B6
SRP350F 3.50 6.3 30 100 1.9 20.00 3.0 0.017 0.024 0.031 0.040 0.050 B6
SRP420F 4.20 7.6 30 100 2.2 20.00 6.0 0.012 0.018 0.024 0.030 0.040 B6
† R1MAX value for this device is the maximum resistance of the device at 20°C one hour after reflow.
Notes:
IH : Hold current: maximum current device will pass without interruption in 20°C still air unless otherwise specified.
IT : Trip current: minimum current that will switch the device from low resistance to high resistance in 20°C still air unless otherwise specified.
VMAX : Maximum voltage device can withstand without damage at rated current.
PD : Power dissipated from device when in the tripped state in 20°C still air unless otherwise specified.
RTyp : Typical resistance of device as supplied at 20°C unless otherwise specified.
RTripped Typ : Typical resistance, measured at 20°C unless otherwise specified, of device one hour after being tripped the first time.

Figure B2-B14 Dimension Figures for Strap Battery Devices
Figure B2 Figure B3 Figure B4
A B A B A B
C F C F C F
D E D E D E
A B A B
A B
C F C F C F
D E D E D E
A B A B
A B
C F C F C F
D E
D E D E
A B
A
A B B
C C F C
10
D E D E
D
Figure B14
A B
C F
D E

Table B4 Dimensions for Strap Battery Devices in Millimeters (Inches)
A B C D E F
VLR
VLR170F 20.8 23.2 — 0.8 3.5 3.9 4.5 6.5 4.5 6.5 2.4 2.6 B3
(0.82) (0.91) — (0.03) (0.14) (0.15) (0.18) (0.26) (0.18) (0.26) (0.09) (0.10)
VLR170LF 38.8 41.2 — 0.8 3.5 3.9 8.7 10.3 18.7 20.3 2.4 2.6 B3
(1.53) (1.62) — (0.03) (0.14) (0.15) (0.34) (0.41) (0.74) (0.80) (0.09) (0.10)
VLR170UF 20.8 23.2 — 0.07 3.5 3.7 5.3 6.7 5.3 6.7 2.4 2.6 B5
(0.81) (0.91) — (0.03) (0.14) (0.15) (0.21) (0.26) (0.21) (0.26) (0.09) (0.10)
VLR175F 23.0 24.5 0.5 0.8 2.9 3.3 4.7 7.2 3.8 5.4 2.4 2.6 B3
(0.91) (0.96) (0.02) (0.03) (0.11) (0.13) (0.19) (0.28) (0.15) (0.21) (0.09) (0.10)
VLR175LF 29.3 31.7 — 0.8 2.9 3.3 5.2 6.8 10 12.5 2.4 2.6 B3
(1.15) (1.25) — (0.03) (0.11) (0.13) (0.21) (0.27) (0.39) (0.49) (0.09) (0.10)
VLR175UF 23.0 24.5 — 0.7 2.9 3.1 5.2 7.5 4.3 5.7 2.4 2.6 B5
(0.91) (0.96) — (0.03) (0.11) (0.12) (0.20) (0.30) (0.17) (0.22) (0.09) (0.10)
VLR230F 20.9 23.1 — 0.8 4.9 5.3 4.1 5.8 4.1 5.8 3.9 4.1 B3
(0.82) (0.91) — (0.03) (0.19) (0.21) (0.16) (0.23) (0.16) (0.23) (0.15) (0.16)
VLP
VLP210F 15.4 17.5 0.6 0.8 6.9 7.3 4.0 6.2 4.0 6.2 3.9 4.1 B2
(0.61) (0.69) (0.02) (0.03) (0.27) (0.29) (0.16) (0.24) (0.16) (0.24) (0.15) (0.16)
VLP220F 21.1 23.3 0.6 0.8 3.5 3.9 5.1 6.8 5.1 6.8 2.9 3.1 B3
(0.83) (0.92) (0.02) (0.03) (0.13) (0.15) (0.20) (0.27) (0.20) (0.27) (0.11) (0.12)
VLP270F 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 5.8 3.9 4.1 B3
(0.82) (0.91) (0.02) (0.03) (0.19) (0.21) (0.16) (0.23) (0.16) (0.23) (0.15) (0.16)
VTP
VTP110F 23.6 25.6 — 0.7 2.7 2.9 7.0 8.0 7.0 8.0 2.3 2.5 B5
(0.93) (1.01) — (0.03) (0.11) (0.11) (0.28) (0.32) (0.28) (0.32) (0.09) (0.10)
VTP170F 15.4 17.5 0.5 0.8 7.0 7.4 4.0 6.2 4.0 6.2 3.9 4.1 B2
(0.606) (0.689) (0.02) (0.03) (0.275) (0.292) (0.157) (0.244) (0.157) (0.244) (0.15) (0.16)
VTP170SSF 15.4 17.5 0.5 0.8 7.0 7.4 4.0 6.2 4.0 6.2 3.9 4.1 B8
(0.606) (0.689) (0.02) (0.03) (0.275) (0.292) (0.157) (0.244) (0.157) (0.244) (0.154) (0.161)
VTP170XF 20.9 22.9 0.5 0.8 4.9 5.3 6.0 8.6 6.0 8.6 3.9 4.1 B3
(0.82) (0.90) (0.02) (0.03) (0.19) (0.21) (0.23) (0.34) (0.23) (0.34) (0.15) (0.16)
VTP170XSF 20.9 22.9 0.5 0.8 4.9 5.3 6.0 8.6 6.0 8.6 3.9 4.1 B4
(0.82) (0.90) (0.02) (0.03) (0.19) (0.21) (0.23) (0.34) (0.23) (0.34) (0.15) (0.16)
VTP175F 21.2 23.2 — 0.8 3.5 3.9 4.6 6.6 4.6 6.6 2.9 3.1 B3
(0.83) (0.91) — (0.03) (0.14) (0.15) (0.18) (0.26) (0.18) (0.26) (0.11) (0.12)
VTP175LF 25.8 28.2 — 0.8 3.5 3.9 5.7 7.3 8.7 10.3 2.4 2.6 B3
(1.02) (1.11) — (0.03) (0.13) (0.15) (0.22) (0.29) (0.34) (0.41) (0.09) (0.10)
VTP175UF 21.2 23.2 — 0.7 3.5 3.7 5.6 6.8 5.6 6.8 2.9 3.1 B5
(0.83) (0.91) — (0.03) (0.13) (0.15) (0.22) (0.27) (0.22) (0.27) (0.11) (0.12)
VTP210GF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 5.8 3.9 4.1 B3
(0.82) (0.91) (0.02) (0.03) (0.19) (0.21) (0.16) (0.23) (0.16) (0.23) (0.15) (0.16)
VTP210SF 20.9
(0.82)
23.1
(0.91)
0.6
(0.02)
0.8
(0.03)
4.9
(0.19)
5.3
(0.21)
4.1
(0.16)
5.8
(0.23)
4.1
(0.16)
5.8
(0.23)
3.9
(0.15)
4.1
(0.16)
B4
10
VTP210SLF 29.0 32.0 0.6 0.8 4.9 5.3 12.5 14.5 3.5 5.8 3.9 4.1 B4
(1.14) (1.26) (0.02) (0.03) (0.19) (0.21) (0.49) (0.57) (0.13) (0.23) (0.15) (0.16)
LTP
LTP070F 19.9 22.1 0.7 1.2 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B6
(0.783) (0.870) (0.027) (0.048) (0.192) (0.205) (0.216) (0.296) (0.216) (0.296) (0.153) (0.162)
LTP100SF 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B7
(0.82) (0.91) (0.02) (0.04) (0.19) (0.20) (0.16) (0.22) (0.16) (0.22) (0.15) (0.16)
LTP180LF 35.5 37.5 0.6 1.0 4.9 5.2 9.7 11.0 9.7 11.0 3.9 4.1 B6
(1.40) (1.48) (0.02) (0.04) (0.19) (0.20) (0.38) (0.44) (0.38) (0.44) (0.15) (0.16)
LTP190F 21.3 23.4 0.5 1.1 10.2 11.0 5.0 7.6 5.0 7.6 4.8 5.4 B6
(0.84) (0.92) (0.02) (0.04) (0.40) (0.43) (0.20) (0.30) (0.20) (0.30) (0.19) (0.21)
LTP260F 24.0 26.0 0.6 1.0 10.8 11.9 5.0 7.0 5.0 7.0 5.9 6.1 B6
(0.94) (1.02) (0.02) (0.04) (0.43) (0.47) (0.20) (0.28) (0.20) (0.28) (0.23) (0.24)
LTP340F 24.0 26.0 0.6 1.0 14.8 15.9 4.0 5.0 4.0 5.0 5.9 6.1 B6
(0.94) (1.02) (0.02) (0.04) (0.58) (0.63) (0.16) (0.20) (0.16) (0.20) (0.23) (0.24)

Table B4 Dimensions for Strap Battery Devices in Millimeters (Inches) Cont’d
A B C D E F
miniSMDE
miniSMDE190F 11.15 11.51 0.33 0.53 4.83 5.33 0.51 1.02 — — — — B13
(0.439) (0.453) (0.013) (0.021) (0.19) (0.21) (0.02) (0.04) — — — —
MXP
MXP190BB 9.2 10.8 0.7 1.1 2.96 3.26 1.6 3.1 1.6 3.1 2.2 2.4 B14
(0.36) (0.43) (0.03) (0.04) (0.01) (0.13) (0.06) (0.12) (0.06) (0.12) (0.09) (0.09)
LR4
LR4-190F 19.9 22.1 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B9
(0.78) (0.87) (0.02) (0.04) (0.19) (0.22) (0.22) (0.30) (0.22) (0.30) (0.15) (0.16)
LR4-260F 20.9 23.1 0.6 1.0 4.9 5.5 4.1 5.5 4.1 5.5 3.9 4.1 B9
(0.82) (0.91) (0.02) (0.04) (0.19) (0.22) (0.16) (0.22) (0.16) (0.22) (0.15) (0.16)
LR4-260SF 20.9 23.1 0.6 1.0 4.9 5.5 4.1 5.5 4.1 5.5 3.9 4.1 B10
(0.82) (0.91) (0.02) (0.04) (0.19) (0.22) (0.16) (0.22) (0.16) (0.22) (0.15) (0.16)
LR4-380F 24.0 26.0 0.6 1.0 6.9 7.5 4.1 5.5 4.1 5.5 4.9 5.1 B9
(0.94) (1.02) (0.02) (0.04) (0.27) (0.30) (0.16) (0.22) (0.16) (0.22) (0.19) (0.20)
LR4-380XF 32.2 35.8 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B9
(1.27) (1.41) (0.02) (0.04) (0.19) (0.22) (0.22) (0.30) (0.22) (0.30) (0.15) (0.16)
LR4-450F 24.0 26 0.6 1.0 9.9 10.5 5.3 6.7 5.3 6.7 5.9 6.1 B9
(0.94) (1.02) (0.02) (0.04) (0.41) (0.39) (0.21) (0.26) (0.21) (0.26) (0.23) (0.24)
LR4-550F 35.0 37.0 0.6 1.0 6.9 7.5 5.3 6.7 5.3 6.7 4.9 5.1 B9
(1.38) (1.46) (0.02) (0.04) (0.27) (0.30) (0.21) (0.26) (0.21) (0.26) (0.19) (0.20)
LR4-600F 24.0 26.0 0.6 1.0 13.9 14.5 4.1 5.5 4.1 5.5 5.9 6.1 B9
(0.95) (1.02) (0.02) (0.04) (0.55) (0.57) (0.16) (0.22) (0.16) (0.22) (0.23) (0.24)
LR4-600XF 40.5 42.7 0.6 1.0 6.9 7.5 5.2 6.8 5.2 6.8 4.9 5.1 B9
(1.59) (1.68) (0.02) (0.04) (0.27) (0.30) (0.20) (0.27) (0.20) (0.27) (0.19) (0.20)
LR4-730F 27.1 29.1 0.6 1.0 13.9 14.5 4.1 5.5 4.1 5.5 5.9 6.1 B9
(1.06) (1.15) (0.02) (0.04) (0.54) (0.57) (0.16) (0.22) (0.16) (0.22) (0.23) (0.24)
LR4-900F 45.4 47.6 0.9 1.3 7.9 8.5 4.6 6.2 4.6 6.2 5.9 6.1 B9
(1.79) (1.87) (0.04) (0.05) (0.31) (0.33) (0.18) (0.24) (0.18) (0.24) (0.23) (0.24)
LR4-1300SSF 61.5 66.5 0.9 1.3 9.4 10.0 5.0 7.5 5.0 7.5 5.9 6.1 B12
(0.42) (2.62) (0.04) (0.05) (0.37) (0.39) (0.20) (0.30) (0.20) (0.30) (0.23) (0.24)
SRP
SRP120F 19.9 22.1 0.6 1.0 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B6
(0.78) (0.87) (0.02) (0.04) (0.19) (0.20) (0.22) (0.30) (0.22) (0.30) (0.15) (0.16)
SRP120LF 24.9 27.1 0.6 1.0 4.9 5.2 5.5 7.5 10.5 12.5 3.9 4.1 B6
(0.98) (1.07) (0.02) (0.04) (0.19) (0.20) (0.22) (0.30) (0.41) (0.49) (0.15) (0.16)
SRP120SF 19.9 22.1 0.6 1.0 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B11
(0.78) (0.87) (0.02) (0.04) (0.19) (0.20) (0.22) (0.30) (0.22) (0.30) (0.15) (0.16)
SRP175F 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B6
10 SRP175LF
(0.82)
29.9
(0.91)
32.1
(0.02)
0.6
(0.04)
1.0
(0.19)
4.9
(0.20)
5.2
(0.16)
10.5
(0.22)
12.5
(0.16)
5.5
(0.22)
7.5
(0.15)
3.9
(0.16)
4.1 B6
(1.18) (1.26) (0.02) (0.04) (0.19) (0.20) (0.41) (0.49) (0.22) (0.30) (0.15) (0.16)
SRP175SF 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B11
(0.82) (0.91) (0.02) (0.04) (0.19) (0.20) (0.16) (0.22) (0.16) (0.22) (0.15) (0.16)
SRP200F 21.3 23.4 0.5 1.1 10.2 11.0 5.0 7.6 5.0 7.6 4.8 5.4 B6
(0.84) (0.92) (0.02) (0.04) (0.40) (0.43) (0.20) (0.30) (0.20) (0.30) (0.19) (0.21)
SRP350F 28.4 31.8 0.5 1.1 13.0 13.5 6.3 8.9 6.3 8.9 6.0 6.6 B6
(1.12) (1.25) (0.02) (0.04) (0.53) (0.51) (0.25) (0.35) (0.25) (0.35) (0.24) (0.26)
SRP420F 30.6 32.4 0.5 1.1 12.9 13.6 5.0 7.5 5.0 7.5 6.0 6.7 B6
(1.20) (1.28) (0.02) (0.04) (0.51) (0.54) (0.20) (0.30) (0.20) (0.30) (0.24) (0.26)

Figure B15-B22 Typical Time-to-trip Curves at 20°C for Strap Battery Devices
VLR (data at 25°C) Figure B15

A = VLR170F 100
B = VLR175F
C = VLR230F C
10
B
A
Time-to-trip (s)
1
0.10
0.01 C
B
A
0.001
1 10 100
Fault Current (A)
VLP (data at 25°C) Figure B16

A = VLP210F 100
B = VLP220F
C = VLP270F
10 C
B
A
Time-to-trip (s)
0.10
B
0.01 A
0.001
1 10 100
Fault Current (A)
VTP (data at 25°C) Figure B17

A = VTP110F
B = VTP170F
100
10
C = VTP175F
10
D
D = VTP210GF
A
C
B
1
Time-to-trip (s)
0.10
0.01
B
D
A
C
0.001
1 10 100
Fault Current (A)

Figure B15-B22 Typical Time-to-trip Curves at 20°C for Strap Battery Devices Cont’d
Figure B18
LTP
100
A = LTP070F
B = LTP100SF
C = LTP180LF 10 A B
C D E
F
D = LTP190F
E = LTP260F
F = LTP340F 1
Time-to-trip (s)
A E F
B CD
0.10
0.01
0.001
1 10 100
Fault Current (A)
Figure B19
MXP (data at 25°C)
10
A = MXP190BB
1
Typical Time-to-trip (s)
0.10
0.01
A
0.001
1 10 100
Fault Current (A)
LR4 Figure B20
10 A =
B =
LR4-190F
LR4-260F
100
G
C = LR4-380F E H
I
D = LR4-450F A B
C
D
10
E = LR4-550F G
F = LR4-600F
F
G = LR4-730F E I
1
H = LR4-900F D
C
I = LR4-1300SSF H
B
0.10 A
0.01
1 10 100
Fault Current (A)

Figure B15-B22 Typical Time-to-trip Curves at 20°C for Strap Battery Devices Cont’d
SRP Figure B21

A = SRP120F 100
B = SRP175F
C = SRP200F
D = SRP350F
10
E
E = SRP420F C D

A B
0.10
E
D
C
B
A
0.01
1 10 100
Fault Current (A)
miniSMDE Figure B22

A = miniSMDE190F 100
A
10
0.10
A
0.01
0.001
0.1 1 10 100
Fault Current (A)
10

Table B5 Physical Characteristics and Environmental Specifications for Strap Battery Devices
VLR
Lead material 0.125mm nominal thickness, quarter-hard nickel

Tape material Polyester
60°C, 1000 hours ±20%
Humidity aging 60°C/95% RH, 1000 hours ±30%
Vibration MIL-STD-883D, Method 2026 No change
VLP and VTP


60°C, 1000 hours ±10%
LTP

Humidity aging 85°C/85% RH, 7 days ±15%
Vibration MIL-STD-883C, Test Condition A No change
10
MXP
Lead material 0.1mm nominal thickness, half-hard nickel

Coating material Epoxy
60°C, 1000 hours ±20%

Table B5 Physical Characteristics and Environmental Specifications for Strap Battery Devices Cont’d
LR4

SRP

Vibration MIL-STD-883C, Test Condition A No change
miniSMDE
Termination pad materials Solder-plated copper

Termination pad solderability Meets EIA specification RS186-9E, ANSI/J-STD-002 Category 3
Passive aging 60°C, 1000 hours ±5% typical
Humidity aging 85°C/85% RH, 100 days ±15% typical
Thermal shock 85°C, -40°C (20 times) -33% typical
125°C, -55°C (10 times) -33% typical
Reflow conditions 260°C for 10-20 seconds Less than R1MAX 10
Tape and reel specifications Per EIA 481-1 N/A
Note: Storage conditions: 40°C max., 70% RH max.; devices should remain in original sealed bags prior to use. Devices may not meet specified values if these storage conditions are exceeded.

Table B6 Packaging and Marking Information/Agency Recognition for Strap Battery Devices

VLR
VLR170F 1,000 — 10,000 R17 UL, CSA,TÜV
VLR170LF 1,000 — 10,000 R17 UL, CSA,TÜV
VLR170UF 1,000 — 10,000 — UL, CSA,TÜV
VLR175F 1,000 — 10,000 R1X UL, CSA,TÜV
VLR175LF 1,000 — 10,000 R1X UL, CSA,TÜV
VLR175UF 1,000 — 10,000 — UL, CSA,TÜV
VLR230F 1,000 — 10,000 R23 UL, CSA,TÜV
VLP
VLP210F 1,000 — 10,000 W21 UL, CSA, TÜV
VLP220F 1,000 — 10,000 W22 UL, CSA, TÜV
VLP270F 1,000 — 10,000 W27 UL, CSA, TÜV
VTP
VTP110F 1,000 — 10,000 — UL, CSA, TÜV
VTP170F 1,000 — 10,000 V17 UL, CSA, TÜV
VTP170SSF 1,000 — 10,000 V17 UL, CSA, TÜV
VTP170XF 1,000 — 10,000 V17 UL, CSA, TÜV
VTP170XSF 1,000 — 10,000 V17 UL, CSA, TÜV
VTP175F 1,000 — 10,000 V1X UL, CSA, TÜV
VTP175LF 1,000 — 10,000 V1X UL, CSA, TÜV
VTP175UF 1,000 — 10,000 — UL, CSA, TÜV
VTP210GF 1,000 — 10,000 V21 UL, CSA, TÜV
VTP210SF 1,000 — 10,000 V21 UL, CSA, TÜV
VTP210SLF 1,000 — 10,000 V21 UL, CSA, TÜV
LTP
LTP070F 2,000 — 10,000 L07 UL, CSA, TÜV
LTP100SF 2,000 — 10,000 L10 UL, CSA, TÜV
LTP180LF 500 — 10,000 L18 UL, CSA, TÜV
LTP190F 500 — 10,000 L19 UL, CSA, TÜV
LTP260F 1,000 — 10,000 L26 UL, CSA, TÜV
LTP340F 500 — 10,000 L34 UL, CSA, TÜV
miniSMDE
miniSMDE190F-2 — 5,000 5,000 19 UL, CSA, TÜV
MXP
MXP190BB 4,000 — 8,000 — UL, CSA, TÜV
10 125°C Typical Activation
LR4
LR4-190F 2,000 — 10,000 E19 UL, CSA, TÜV
LR4-260F 1,000 — 10,000 E26 UL, CSA, TÜV
LR4-260SF 1,000 — 10,000 E26 UL, CSA, TÜV
LR4-380F 1,000 — 10,000 E38 UL, CSA, TÜV
LR4-380XF 1,000 — 10,000 E3X UL, CSA, TÜV
LR4-450F 1,000 — 10,000 E45 UL, CSA, TÜV
LR4-550F 1,000 — 10,000 E55 UL, CSA, TÜV
LR4-600F 1,000 — 10,000 E60 UL, CSA, TÜV
LR4-600XF 1,000 — 10,000 E60 UL, CSA, TÜV
LR4-730F 1,000 — 10,000 E73 UL, CSA, TÜV
LR4-900F 500 — 10,000 E90 UL, CSA, TÜV
LR4-1300SSF 250 — 10,000 EX3 UL, CSA, TÜV

Table B6 Packaging and Marking Information/Agency Recognition for Strap Battery Devices Cont’d

SRP
SRP120F 1,000 — 10,000 120 UL, CSA, TÜV
SRP120LF 1,000 — 10,000 120 UL, CSA, TÜV
SRP120SF 2,000 — 10,000 120 UL, CSA, TÜV
SRP175F 2,000 — 10,000 175 UL, CSA, TÜV
SRP175LF 1,000 — 10,000 175 UL, CSA, TÜV
SRP175SF 2,000 — 10,000 175 UL, CSA, TÜV
SRP200F 1,000 — 10,000 200 UL, CSA, TÜV
SRP350F 500 — 10,000 350 UL, CSA, TÜV
SRP420F 500 — 10,000 420 UL, CSA, TÜV
Agency Recognition for Strap Battery Devices
UL File # E74889
CSA File # 78165C
TÜV Certificate number available on request
Installation Guidelines for the Strap Family

• PPTC devices operate by thermal expansion of the conductive polymer. If devices are placed under pressure or installed in spaces that
would prevent thermal expansion, they may not properly protect against damage caused by fault conditions. Designs must be selected in
such a manner that adequate space is maintained over the life of the product.
• Twisting, bending, or placing the PPTC device in tension will decrease the ability of the device to protect against damage caused by
electrical faults. No residual force should remain on device after installation. Mechanical damage to the PPTC device may affect device
performance and should be avoided.
• Chemical contamination of PPTC devices should be avoided. Certain greases, solvents, hydraulic fluids, fuels, industrial cleaning agents,
volatile components of adhesives, silicones, and electrolytes can have an adverse effect on device performance.
• PPTC strap devices are designed to be resistance welded to battery cells or to pack interconnect straps, yet some precautions must be
taken when doing so. In order for the PPTC device to exhibit its specified performance, weld placement should be a minimum of 2mm from
the edge of the PPTC device, weld splatter must not touch the PPTC device, and welding conditions must not heat the PPTC device above
its maximum operating temperature. 10
• PPTC strap devices are not designed for applications where reflow onto flex circuits or rigid circuit boards is required.
• The polyester tape on PPTC strap devices is intended for marking and indentification purposes only, not for electrical insulation.
• The coating on MXP devices is intended to prevent oxidization/aging of the devices. Damaging the coating or causing the coating to
delaminate can have negative effects on device performance and should be avoided.
• MXP devices have small PPTC chip size and therefore have weaker peel strength between polymer and Ni-foil of the chip. Excessive
mechanical force to the device may cause delamination of Ni-foil from polymer.

Part Numbering System for Strap Battery Devices
LTP 190 SS
Modifier
F = Lead-free version
G = Global design (standard product)
L = Long lead or leads
S = Slit lead
SS = Both leads slit
X = Rotated chip
U = Untaped
Product Series
VTP 210 SL 19.2/5.8
Maximum length of leads (mm)
Modifier
F = Lead-free version
G = Global design (standard product)
L = Long lead or leads
S = Slit lead
SS = Both leads slit
X = Rotated chip
U = Untaped
Product Series
10
Warning :

PolySwitch Resettable Devices – Telecommunications & Networking Devices
Telecommunications & Networking Devices
This family of telecommunication and networking
devices was initially designed over 10 years ago to meet
the growing demand for resettable overcurrent
protection. These product families help provide
protection against damage caused by power cross and
power induction surges as defined in ITU, Telcordia
GR1089, and UL60950. Available in chip, surface-mount,
and radial-leaded configurations, Tyco Electronics’
PolySwitch devices help improve the reliability of
customer premise and network equipment world wide.
Benefits Features
flexibility • Resettable overcurrent protection
• Compatible with high volume electronics assembly • Surface-mount, radial-leaded, and chip form factors
• Assist in meeting regulatory equipment requirements • Fast time-to-trip
• Improved line balance • Agency recognition: UL, CSA, TÜV
• Applicable for legacy POTS and modern digital • Resistance sorted and matched devices available
communications equipment
• Low parasitic capacitance/flat impedance with
frequency
Applications 10
• Modems • PBX systems • Powered ethernet systems
• Phone sets • MDF modules • VoIP (Voice over Internet Protocol) equipment
• Fax machines • Analog and digital line cards • LAN, WAN equipment
• Phone wall outlets • T1/E1 equipment • Customer premise equipment
• Alarm systems • xDSL modems and splitters • Access network hardware
187
Application Guide for Telecommunications and Networking Devices*
To use this guide, follow the steps below:
1. Select your equipment type from the guide below.
2. Select the type of protection depending on the agency and regional specifications in the second column.
3. Select the form factor for your application.
4. Use the Agency Specification/ PolySwitch Device Selection Guide on the next page to select a specific part number for each application
based on the agency requirements.
5. Parts with fast time-to-trip or low resistance are available. Please consult a Tyco Electronics representative.
Overcurrent Protection
Region/ Form Factor

Application Specification Radial-leaded Surface-mount Chip
Customer Premises equipment North America TRF600-150 TS600-170F
IT equipment TIA-968-A, TR600-150F-EX TS600-200F
Analog modems, V.90 modems, UL 60950, TRF600-160 TSM600-250F
ISDN modems, xDSL modems, GR1089 Port Type 3‡ TRF600-400 TSM600-400F
ADSL splitters, phone sets, fax machines, Europe/Asia/ TRF250-120 TS250-130F
answering machines, caller ID, internet South America TRF250-120T TSV250-130F
appliances, PBX systems, POS terminals, ITU K.21 TRF250-145
wall plugs TRF250-183
TRF250-184
Access network equipment (†) North America TRF600-160 TS600-170F
Remote terminals, line repeaters, GR1089 Port Type 5‡ TRF600-400 TS600-200F
multiplexers, cross-connects, TS600-400F
WAN equipment TSM600-250F
TSM600-400F
FT600-1250**
Europe/Asia/ TRF250-120 TS250-130F
South America TRF250-120T TSV250-130F
ITU K.45 TRF250-145
TRF250-183
TRF250-184
Central office switching equipment (†) North America TRF600-160 TS600-170F
Analog/POTS linecards, ISDN linecards, GR1089 Port Type 1‡ TRF600-400 TS600-200F
xDSL modems, ADSL/VDSL splitters, TS600-400F
T1/E1 linecards, multiplexers, TSM600-250F
CSU/DSU, servers TSM600-400F
FT600-1250**
Europe/Asia/ TRF250-120 TS250-130F TCF250-180
ITU K.20 TRF250-145
TRF250-183
TRF250-184
Primary protection modules (†) North America TRF250-183
MDF modules, Network Interface Telcordia GR-974 TRF250-184
Devices (NID) Europe/Asia/ TRF250-055UT TSL250-080F TCF250-100T
10 South America
ITU K.20
TRF250-080U
TRF250-110U
TS250-130F
TSV250-130F
TCF250-120T
TCF250-145T
TRF250-120 TCF250-180
TRF250-120T
TRF250-145
TRF250-183
TRF250-184
Short-haul/intrabuilding communications North America TRF250-080U TSL250-080F
equipment (†) GR1089 Port Type 2‡ TRF250-120 TS250-130F
LAN equipment, VoIP cards, cable GR1089 Port Type 4‡ TRF250-120T TSV250-130F
telephony NIUs, wireless local loop TRF250-145
handsets TRF250-183
TRF250-184
Europe/Asia/ TRF250-120 TS250-130F
ITU K.21 TRF250-145
TRF250-183
TRF250-184

Protection Application Guide for Telecommunications and Networking Devices* Cont’d
Overcurrent Protection
Region/ Form Factor

Application Specification Radial-leaded Surface-mount Chip
LAN intrabuilding power cross protection North America TRF250-080U TSL250-080F
LAN equipment, VoIP cards, IP phones GR1089 Port Type 4‡ TRF250-120 TS250-130F
TRF250-120T TSV250-130F
TRF250-145
TRF250-183
TRF250-184
IEEE 802.3AF/AT Power over decaSMDC050F/60-2††
Ethernet protection
Powered Ethernet switches and terminals,
IP phones, wireless LAN base stations,
microcellular base stations, VoIP cards
Cable telephony powering system
Power passing taps BBRF550‡‡
* This list is not exhaustive. Tyco Electronics welcomes our customers’ input for additional application ideas for PolySwitch resettable devices.
† For improved line balance in these applications, resistance-matched parts are recommended.
‡ May require additional impedance or coordination with primary protector.
** FT600-1250 are surface mount telecom fuse devices. FT600-0500 and FT600-2000 reference also available. See telecom fuses section.
†† For details on decaSMDC050F/60-2, see surface-mount devices section.
‡‡ For details on BBRF series, see radial-leaded devices section.
Agency Specification/Selection Guide for Telecommunications and Networking Devices

Use the guide below to select the PolySwitch devices which are typically used in your application. The following pages contain the
specifications for the part numbers recommended below. PolySwitch devices assist telecommunication equipment in meeting the applicable
protection requirements of these industry specifications. Refer to individual agency specifications for test procedures and circuit schematics.
Users should independently evaluate the suitability of, and test each product for their application.
Family Product* Lightning Power Cross/Contact/Induction

TCF250 TCF250-100T ITU K.20 – 1.0kV 10/700µs PRC YD/T694
GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 0.2A2s
ITU K.20/21/45 – 1A2s†
GR-1089 Port Type 4 – 120VAC, 25Asc
TCF250-120T ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 230VAC, 10Ω
TCF250-145T ITU K.20/21/45 – 4.0kV 10/700µs† ITU K.20/21/45 – 0.2A2s
10
TCF250-180 GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 1A2s†
ITU K.20/21/45 – 10A2s†
* Applies to all products which share the same prefix.
† Tested with 230V gas discharge tube primary protector.

Agency Specification/Selection Guide for Telecommunications and Networking Devices Cont’d
Family Product* Lightning Power Cross/Contact/Induction

TRF250 TRF250-055UT ITU K.20 – 1.0kV 10/700µs ITU K.20 – 230VAC, 10Ω
TRF250-080U ITU K.20 – 1.0kV 10/700µs ITU K.20 – 230VAC, 10Ω
GR-1089 Port Types 2 & 4 – 1st Level ITU K.20 – 0.2A2s
ITU K.20 – 1A2s†
TRF250-110U ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 230VAC, 10Ω
TRF250-120 ITU K.20/21/45 – 4.0kV 10/700µs† ITU K.20/21/45 – 0.2A2s
TRF250-120T GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 1A2s†
TRF250-120U ITU K.20/21/45 – 10A2s†
TRF250-120UT GR-1089 Port Type 4 – 120VAC, 25Asc
TRF250-145
TRF250-145U
TRF250-183
TRF250-184 ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 230VAC, 10Ω **
ITU K.20/21/45 – 4.0kV 10/700µs‡ ITU K.20/21/45 – 0.2A2s
GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 1A2s‡
ITU K.20/21/45 – 10A2s‡
TS250/TSV250 TSV250-130F ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 230VAC, 10Ω
TS250-130F ITU K.20/21/45 – 4.0kV 10/700µs† ITU K.20/21/45 – 0.2A2s
GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 1A2s†
ITU K.20/21/45 – 10A2s†
TS250-130F-RB ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 230VAC, 10Ω
ITU K.20/21/45 – 4.0kV 10/700µs‡ ITU K.20/21/45 – 0.2A2s
GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 1A2s‡
ITU K.20/21/45 – 10A2s‡
TSL250 TSL250-080F GR-1089 Port Types 2 & 4 – 1st Level GR-1089 Port Type 4 – 120VAC, 25Asc
ITU K.20 – 1.0kV 10/700µs ITU K.20/21/45 – 230VAC, 10Ω
ITU K.20/21/45 – 0.2A2s
ITU K.20/21/45 – 1A2s†
TRF600 TRF600-150 TIA-968-A Types A & B UL60950 – 600VAC, 40Asc
TR600-150F-EX GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† UL60950 – 600VAC, 40Asc
TR600-150F-EX-RA-B-0.5 GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† UL60950 – 600VAC, 40Asc
TRF600-160 GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† Telcordia GR-1089 – 600VAC, 60Asc
10 TS600
TRF600-400
TS600-170F
GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level
TIA-968-A Types A & B
Telcordia GR-1089 – 600VAC, 60Asc
UL60950 – 600VAC, 40Asc
TS600-200F-RA GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† Telcordia GR-1089 – 600VAC, 60Asc
TS600-400F
TSM600 TSM600-250F TIA-968-A Types A & B UL60950 – 600VAC, 40Asc
TSM600-250F-RA GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† Telcordia GR-1089 – 600VAC, 60Asc
TSM600-400F TIA-968-A Types A & B UL60950 – 600VAC, 40Asc
GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level Telcordia GR-1089 – 600VAC, 60Asc
FT600‡‡ FT600-0500 TIA-968-A - Types A & B UL60950 – 600VAC, 40Asc
FT600-1250
FT600-2000 GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level Telcordia GR-1089 – 600VAC, 60Asc
* Applies to all products which share the same prefix.
† Tested with 230V gas discharge tube primary protector.
‡ Tested with 350V gas discharge tube primary protector.
** See SCD for additional application fault ratings.
†† May require additional series resistor to help telecommunication equipment pass Surge 3 (1kV, 10/1000µs).
‡‡ See telecom fuses section.

Product Series: Size, Current Rating, Voltage Rating, Typical Resistance for
Table T1
Telecommunications and Networking Devices
TS600
TCF250 TRF250 TS250 TSV250 TSL250 TSM600 TRF600
Voltage Rating (VAC)* 250 250 250 250 250 600 600
(Interrupt)
ITU ITU ITU ITU UL60950 UL60950

GR-1089 GR-1089 GR-1089 GR-1089 GR-1089 GR-1089 GR-1089
Specification Ports 2 & 4 Ports 2 & 4 Ports 2 & 4 Ports 2 & 4 Ports 2 & 4 Ports 1, 3, & 5 Ports 1, 3, & 5
Hold Current (A)
0.055 — 20.0Ω — — — — —
0.080 — 17.0Ω — — 8.0Ω — —
0.100 11.0Ω — — — — — —
0.110 — 7.0Ω — — — — —
0.120 10.5Ω 8.0Ω — — — — —
0.130 — — 9.0Ω 5.5Ω — — —
0.145 7.0Ω 4.5Ω — — — — —
0.150 — — — — — — 8.0Ω
0.160 — — — — — — 6.0Ω
0.170 — — — — — 11.0Ω —
0.183 — 1.3Ω — — — — —
0.184 — 1.9Ω — — — — —
0.200 — — — — — 8.5Ω —
0.250 — — — — — 3.5Ω —
0.400 — — — — — 1.2Ω 1.2Ω
Voltage Ratings for Telecommunications and Networking Devices
For Raychem circuit protection telecommunications devices there are two applicable voltage ratings. These are VMAX Operating and
VMAX Interrupt. To help understand the nature of these two different voltage ratings, the following definitions are provided:
VMAX Operating : For telecommunications devices this is the voltage used to obtain component recognition under UL1434. Most Raychem
circuit protection devices are certified at 60V but can withstand higher VMAX Interrupt conditions as noted above.
See Table T3 for its VMAX Operating.
*VMAX Interrupt : Under specified conditions this is the highest voltage that can be applied to the device at the maximum current. Devices
have been designed to trip safely under higher power level cross conditions, as listed above, to assist equipment in
meeting the appropriate industry conditions.
10

Thermal Derating for Telecommunications and Networking Devices
Table T2

Part Number -40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C
Chip* — 250VAC
TCF250
TCF250-100T 0.155 0.138 0.119 0.100 0.083 0.073 0.064 0.055 0.042
TCF250-120T 0.186 0.165 0.143 0.120 0.099 0.088 0.077 0.066 0.050
TCF250-145T 0.225 0.199 0.172 0.145 0.119 0.106 0.093 0.080 0.060
TCF250-180‡ 0.269 0.240 0.211 0.180 0.153 0.138 0.123 0.109 0.087
Radial-leaded* — 250VAC
TRF250
NEW TRF250-055UT 0.085 0.076 0.065 0.055 0.045 0.041 0.035 0.030 0.023
TRF250-080U 0.124 0.110 0.095 0.080 0.066 0.059 0.051 0.044 0.033
TRF250-110U 0.171 0.151 0.131 0.110 0.091 0.081 0.071 0.061 0.046
TRF250-120 0.186 0.165 0.143 0.120 0.099 0.088 0.077 0.066 0.050
TRF250-145 0.225 0.199 0.172 0.145 0.119 0.106 0.093 0.080 0.060
TRF250-183‡ 0.284 0.251 0.217 0.183 0.149 0.133 0.117 0.101 0.075
NEW TRF250-184‡ 0.286 0.252 0.218 0.184 0.150 0.134 0.118 0.102 0.075
Surface-mount* — 250VAC
TS250/TSL250/TSV250
TSL250-080F 0.124 0.110 0.095 0.080 0.066 0.059 0.051 0.044 0.033
TS250-130F 0.208 0.182 0.156 0.130 0.104 0.091 0.078 0.065 0.045
TSV250-130F 0.208 0.182 0.156 0.130 0.104 0.091 0.078 0.065 0.045
Radial-leaded† — 600VAC
TRF600
TRF600-150 0.239 0.209 0.180 0.150 0.121 0.107 0.093 0.079 0.057
TR600-150F-EX 0.239 0.209 0.180 0.150 0.121 0.107 0.093 0.079 0.057
TR600-150F-EX-RA 0.239 0.209 0.180 0.150 0.121 0.107 0.093 0.079 0.057
TRF600-160 0.255 0.223 0.192 0.160 0.129 0.114 0.099 0.084 0.061
NEW TRF600-400 0.640 0.560 0.480 0.400 0.320 0.270 0.230 0.190 0.130
Surface-mount† — 600VAC
TS600/TSM600
TS600-170F 0.264 0.230 0.200 0.170 0.140 0.125 0.109 0.094 0.070
TS600-200F-RA-B-0.5 0.310 0.275 0.238 0.200 0.165 0.147 0.128 0.110 0.083
TS600-400F 0.640 0.560 0.480 0.400 0.320 0.270 0.230 0.190 0.130
TSM600-250F 0.400 0.350 0.300 0.250 0.198 0.170 0.140 0.117 0.083
TSM600-250F-RA 0.400 0.350 0.300 0.250 0.198 0.170 0.140 0.117 0.083
TSM600-400F 0.640 0.560 0.480 0.400 0.320 0.270 0.230 0.190 0.130
* 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements.
† 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements.
‡ Product is not currently available in a resistance matched or sorted option.
Figure T1 Thermal Derating [Hold Current (A) at Ambient Temperature (°C)]
10 A = TCF250-180 Figure T1
B = All other TCF, TRF, 200
TSx, TSM series devices
B
150
100
A
50
0
-40 -20 0 20 40 60 80
Device’s Ambient Temperature (˚C)

Table T3 Electrical Characteristics for Telecommunications and Networking Devices
VMAX IMAX*†
Part IH IT Operating Interrupt Interrupt PD Typ Typical Time-to-trip RMIN RMAX R1MAX
Number (A) (A) (VDC) (VRMS) (A) (W) (A) (s) (Ω) (Ω) (Ω)
Chip* — 250VAC
TCF250
TCF250-100T 0.100 0.150 60 250 3.0 0.6 1.0 0.2 14.0 18.0 24.0
TCF250-120T 0.120 0.240 60 250 3.0 1.0 1.0 0.6 6.3 12.0 18.0
TCF250-145T 0.145 0.290 60 250 3.0 1.0 1.0 1.5 5.0 9.0 14.0
TCF250-180‡ 0.180 0.650 60 250 3.0 0.9 1.0 15.5 1.0 2.2 4.0
TRF250
NEW TRF250-055UT 0.055 0.170 60 250 3.0 0.6 0.28 3.0 15.0 25.0 35.0
TRF250-080T 0.080 0.160 60 250 3.0 0.6 0.35 2.5 15.0 22.0 33.0
TRF250-080U 0.080 0.160 60 250 3.0 0.6 0.35 2.5 14.0 20.0 33.0
TRF250-110U 0.110 0.220 60 250 3.0 1.0 1.00 0.8 5.0 9.0 16.0
TRF250-120 0.120 0.240 60 250 3.0 1.0 1.00 1.5 4.0 8.0 16.0
TRF250-120T 0.120 0.240 60 250 3.0 1.0 0.35 0.7 7.0 12.0 16.0
TRF250-120T-RA 0.120 0.240 60 250 3.0 1.0 1.00 1.2 7.0 9.0 16.0
TRF250-120T-RC 0.130 0.260 60 250 3.0 1.0 1.00 1.5 5.4 7.5 14.0
TRF250-120T-RF 0.120 0.240 60 250 3.0 1.0 1.00 0.9 6.0 10.5 16.0
TRF250-120T-R1 0.120 0.240 60 250 3.0 1.0 1.00 1.0 6.0 9.0 16.0
TRF250-120T-R2 0.120 0.240 60 250 3.0 1.0 1.00 0.8 8.0 10.5 16.0
TRF250-120U 0.120 0.240 60 250 3.0 1.0 1.00 1.0 6.0 10.0 16.0
TRF250-120UT 0.120 0.240 60 250 3.0 1.0 1.00 0.7 7.0 12.0 16.0
TRF250-145 0.145 0.290 60 250 3.0 1.0 1.00 2.5 3.0 6.0 14.0
TRF250-145-RA 0.145 0.290 60 250 3.0 1.0 1.00 2.5 3.0 5.5 12.0
TRF250-145-RB 0.145 0.290 60 250 3.0 1.0 1.00 2.0 4.5 6.0 14.0
TRF250-145T 0.145 0.290 60 250 3.0 1.0 1.00 1.5 5.4 7.5 14.0
TRF250-145U 0.145 0.290 60 250 3.0 1.0 1.00 2.0 3.5 6.5 14.0
TRF250-183‡ 0.183 0.685 100 250 10.0 0.9 3.00 0.6 0.8 2.2 3.4
NEW TRF250-184‡ 0.184 1.000 100 250 10.0 0.9 3.00 0.5 1.2 2.4 3.1
TS250/TSL250/TSV250
TSL250-080F 0.080 0.240 80 250 3.0 1.2 1.0 0.8 5.0 11.0 20.0**
TS250-130F 0.130 0.260 60 250 3.0 1.1 1.0 0.9 6.5 12.0 20.0**
— — 60 600 1.0 — — — — — —
TS250-130F-RA 0.130 0.260 60 250 3.0 1.1 1.0 1.4 6.5 9.0 15.0**
— — 60 600 1.0 — — — — — —
TS250-130F-RB 0.130 0.260 60 250 3.0 1.1 1.0 0.7 9.0 12.0 20.0**
— — 60 600 1.0 — — — — — —
TS250-130F-RC 0.130 0.260 60 250 3.0 1.1 1.0 1.1 7.0 10.0 17.0**
— — 60 600 1.0 — — — — — —
TSV250-130F 0.130 0.260 60 250 3.0 1.5 1.0 2.0 4.0 7.0 12.0** 10
TRF600
TRF600-150 0.150 0.300 250 600 3.0 1.0 1.0 1.4 6.0 10.0 17.0
TRF600-150-RB 0.130 0.260 250 600 3.0 1.0 1.0 1.0 9.0 12.0 22.0
TR600-150F-EX 0.150 0.300 250 600 3.0 1.4 1.0 5.0 6.0 12.0 22.0
TR600-150F-EX-RA-B-0.5 0.150 0.300 250 600 3.0 1.4 1.0 5.0 7.0 10.0 20.0
TRF600-160 0.160 0.320 250 600 3.0 1.7 1.0 7.5 4.0 10.0 18.0
TRF600-160-RA 0.160 0.320 250 600 3.0 1.7 1.0 9.5 4.0 7.0 16.0
TRF600-160-R1 0.160 0.320 250 600 3.0 1.7 1.0 9.0 4.0 8.0 17.0
NEW TRF600-400 0.400 1.000 60 600 3.0 2.4 3.0 4.0 0.95 1.45 1.90
‡ Product is not currently available in a resistance matched or sorted option.
** R1MAX measured 1 hour post-trip, or 24 hours post-reflow at 20°C.

Table T3 Electrical Characteristics for Telecommunications and Networking Devices Cont’d
VMAX IMAX*†
Part IH IT Operating Interrupt Interrupt PD Typ Typical Time-to-trip RMIN RMAX R1MAX
Number (A) (A) (VDC) (VRMS) (A) (W) (A) (s) (Ω) (Ω) (Ω)
TS600/TSM600
TS600-170F 0.170 0.400 60 600 3.0 2.5 1.0 10.0 4.0 9.0 18.0
TS600-200F-RA-B-0.5 0.200 0.400 60 600 3.0 2.5 1.0 12.0 4.0 7.5 13.5
TS600-400F 0.400 1.000 60 600 3.0 2.0 3.0 5.0 0.5 1.5 2.0
TSM600-250F 0.250 0.860 250 600 3.0 2.0 3.0 0.8 1.0 3.5 7.0
TSM600-250F-RA 0.250 0.860 250 600 3.0 2.0 3.0 1.0 1.0 3.0 5.0
TSM600-400F 0.400 1.000 250 600 3.0 2.0 3.0 5.0 0.5 1.5 2.0
Notes:
VMAX Operating : Maximum continuous voltage device can withstand without damage at rated current. This voltage is used for component recognition under UL1434.
VMAX Interrupt : Maximum voltage that can be safely placed across a device in its tripped state. Devices have been designed to trip safely under higher level power cross conditions
to assist equipment in meeting the appropriate ITU, UL60950, or GR1089 industry requirements.
IMAX Interrupt : Maximum fault current device can withstand without damage at rated operating voltage. This current is used for component recognition under UL1434.
Devices have been designed to trip safely under higher level power cross conditions to assist equipment in meeting the appropriate ITU, UL60950, or GR1089
industry requirements.
R1MAX : Maximum resistance measured one hour post-trip or post-reflow at 20°C.
Warning :
10
Figure T2-T13 Dimension Figures for Telecommunications and Networking Devices
Figure T2 Figure T3 Figure T4
A C A C
A C
B
B
B
D D
E
E CL to CL
CL to CL

Figure T2-T13 Dimension Figures for Telecommunications and Networking Devices Cont’d
A C
C C
B
D
B
F E D D E
B A
D E
A
Figure T8 Figure T9
C B
F
B F
D D E E
A G
E D
A

A C A C A C
B B B
D D D
E E E
CL to CL CL to CL CL to CL
10
Figure T13
A C
E
CL to CL

Table T4 Dimensions for Telecommunications and Networking Devices in Millimeters (Inches)
A B C D E F G
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figure
TCF
250V*
TCF250-100T 4.6 4.9 4.6 4.9 2.0 2.3 — — — — — — — — T4
(0.18) (0.19) (0.18) (0.19) (0.08) (0.09)
TCF250-120T 5.4 5.6 5.4 5.6 2.0 2.3 — — — — — — — — T4
(0.21) (0.22) (0.21) (0.22) (0.08) (0.09)
TCF250-145T 5.4 5.6 5.4 5.6 2.0 2.5 — — — — — — — — T4
(0.21) (0.22) (0.21) (0.22) (0.08) (0.10)
TCF250-180 6.9 7.1 6.9 7.1 1.3 1.6 — — — — — — — — T4
(0.27) (0.28) (0.27) (0.28) (0.05) (0.06)
TRF250
250V*
NEW TRF250-055UT — 4.8 — 9.3 — 3.8 4.7 — 5.0‡ — — — — — T2
(0.19) (0.37) (0.15) (0.19) (0.20)
TRF250-080T — 5.8 — 9.9 — 4.6 4.7 — 5.0‡ — — — — — T2
(0.23) (0.39) (0.18) (0.19) (0.20)
TRF250-080U — 4.8 — 9.3 — 3.8 4.7 — 5.0‡ — — — — — T11
(0.19) (0.37) (0.15) (0.19) (0.20)
TRF250-110U — 5.3 — 9.4 — 3.8 4.7 — 5.0‡ — — — — — T11
(0.21) (0.37) (0.15) (0.19) (0.20)
TRF250-120 — 6.5 — 11.0 — 4.6 4.7 — 5.0‡ — — — — — T3
(0.26) (0.43) (0.18) (0.19) (0.20)
TRF250-120U — 6.0 — 10.0 — 3.8 4.7 — 5.0‡ — — — — — T10
(0.24) (0.39) (0.15) (0.19) (0.20)
TRF250-145 — 6.5 — 11.0 — 4.6 4.7 — 5.0‡ — — — — — T3
(0.26) (0.43) (0.18) (0.19) (0.20)
TRF250-145U — 6.0 — 10.0 — 3.8 4.7 — 5.0‡ — — — — — T10
(0.24) (0.39) (0.15) (0.19) (0.20)
TRF250-183 — 7.5 — 10.5 — 4.1 4.7 — 5.0‡ — — — — — T2
(0.29) (0.41) (0.16) (0.19) (0.20)
NEW TRF250-184 — 7.7 — 10.5 — 4.6 4.7 — 5.0‡ — — — — — T12
(0.30) (0.41) (0.18) (0.19) (0.20)
TS250/TSL250/TSV250
250V*
TSL250-080F 6.7 7.9 2.7 3.7 4.8 5.3 0.2 0.4 2.5 3.1 — — — — T7
(0.27) (0.31) (0.11) (0.15) (0.19) (0.21) (0.01) (0.02) (0.10) (0.12)
TS250-130F 8.5 9.4 — 3.4 — 7.4 0.3‡ — 3.8‡ — — — — — T5
(0.34) (0.37) (0.14) (0.29) (0.01) (0.15)
TSV250-130F — 6.1 — 6.9 — 3.2 0.56 — — 1.9 1.6 2.3 — — T6
(0.24) (0.27) (0.13) (0.02) (0.08) (0.07) (0.09)
10 TRF600
600V†
TRF600-150 — 9.0 — 12.5 — 4.6 4.7 — 5.0 — — 9.0 — — T3
(0.35) (0.49) (0.18) (0.19) (0.20) (0.35)
TR600-150F-EX — 13.5 — 12.6 — 6.0 4.7 — 5.0 — — — — — T3
(0.53) (0.50) (0.18) (0.19) (0.20)
TR600-150F-EX-RA-B-0.5 — 13.5 — 12.6 — 6.0 4.7 — 5.0 — — — — — T3
(0.53) (0.50) (0.18) (0.19) (0.20)
TRF600-160 — 16.0 — 12.6 — 6.0 4.7 — 5.0‡ — — 10.0 — — T3
(0.63) (0.50) (0.24) (0.19) (0.20) (0.39)
NEW TRF600-400 — 14.8 — 13.1 — 4.6 4.7 — 5.0‡ — — — — — T13
(0.58) (0.52) (0.18) (0.19) (0.20)
‡ Indicates dimension is typical, not minimum.

Table T4 Dimensions for Telecommunications and Networking Devices in Millimeters (Inches) Cont’d
A B C D E F G
Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figure
TS600/TSM600
600V†
TS600-170F 18.3 19.4 11.6 12.3 7.2 8.3 1.7 2.4 9.9 10.4 1.5 2.3 — — T8
(0.72) (0.77) (0.46) (0.49) (0.29) (0.33) (0.07) (0.10) (0.39) (0.41) (0.06) (0.09)
TS600-200F-RA 18.3 19.4 11.6 12.3 7.2 8.3 1.7 2.4 9.9 10.4 1.5 2.3 — — T8
(0.72) (0.77) (0.46) (0.49) (0.29) (0.33) (0.07) (0.10) (0.39) (0.41) (0.06) (0.09)
TS600-400F 18.3 19.4 11.6 12.3 7.2 8.3 1.7 2.4 9.9 10.4 1.5 2.3 — — T8
(0.72) (0.77) (0.46) (0.49) (0.29) (0.33) (0.07) (0.10) (0.39) (0.41) (0.06) (0.09)
TSM600-250F 17.00 17.60 11.20 11.70 10.40 11.20 4.80 5.20 2.50 2.80 0.60 1.0 2.2 3.1 T9
(0.67) (0.69) (0.44) (0.46) (0.41) (0.44) (0.19) (0.20) (0.10) (0.11) (0.02) (0.04) (0.09) (0.12)
TSM600-250F-RA 17.00 17.60 11.20 11.70 10.40 11.20 4.80 5.20 2.50 2.80 0.60 1.0 2.2 3.1 T9
(0.67) (0.69) (0.44) (0.46) (0.41) (0.44) (0.19) (0.20) (0.10) (0.11) (0.02) (0.04) (0.09) (0.12)
TSM600-400F 17.00 17.60 11.20 11.70 10.40 11.20 4.80 5.20 2.50 2.80 0.60 1.0 2.2 3.1 T9
(0.67) (0.69) (0.44) (0.46) (0.41) (0.44) (0.19) (0.20) (0.10) (0.11) (0.02) (0.04) (0.09) (0.12)
Typical Time-to-trip Curves at 20°C for

Figure T14-T17
TCF250 Figure T14

A = TCF250-180 100
B = TCF250-145T A
C = TCF250-120T
D = TCF250-100T B
10
C
Time-to-trip (s)
1
A
0.10 B
C
0.01
0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00
Fault Current (A)
TRF250
A = TRF250-180/183/184
Figure T15
10
1000
B = TRF250-145/145U
C = TRF250-120/120U A
100
D = TRF250-110U/120UT/120T
B
E = TRF250-080T/080U/080US C
D
Time-to-trip (s)
10 E
1
A
B
0.10 C
D
E
0.01
0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00
Fault Current (A)

Typical Time-to-trip Curves at 20°C for
Figure T14-T17
Telecommunications and Networking Devices Cont’d
TS250/TSV250/TSL250 Figure T16

A = TSV250-130F 100
B = TS250-130F
C = TSL250-080F A
B
C
10
Time-to-trip (s)
1
A
B
0.10 C
0.01
0.00 0.50 1.00 1.50 2.00 2.50 3.00
Fault Current (A)
TRF600/TS600/TSM600 Figure T17

A = TRF600-400/TS600-400/ 1000
TSM600-400F
B = TSM600-250F/ C B
TS600-170F/200F D
100 A
C = TRF600-160 E
D = TR600-150F-EX
Time-to-trip (s)
E = TRF600-150
10
1 B
C
D
E
0.10
0 1 2 3 4 5 6 7
Fault Current (A)
Physical Characteristics and Environmental Specifications for

Table T5
15
10 Operating temperature range for all listed products is -40°C to 85°C, except for TRF250-080T and TRF250-184 (0°C to 85°C)
TCF250*
Terminal material Nickel-plated copper foil
Test Conditions
Passive aging 60°C, 1000 hours
85°C, 1000 hours
Solvent resistance MIL-STD-202, Method 215F
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.
198 RoHS compliant, ELV compliant

Table T5
Operating temperature range for all listed products is -40°C to 85°C, except for TRF250-080T and TRF250-184 (0°C to 85°C)
TRF250*
Lead material Tin-plated copper, 22AWG

Insulating material Cured epoxy polymer
Flammability per IEC 695-2-2 Needle Flame Test for 20s
Soldering characteristics ANSI/J-STD-002, Category 3
Solder heat withstand IEC-STD 68-2-20, Test Tb, Section 5 Method 1A, Condition B: can withstand 10 seconds at 260°C±5°C
Test Conditions
85°C, 1000 hours
TS250/TSV250/TSL250*
Terminal material Tin-plated brass, Nickel under-plating

Soldering characteristics EIC 60008-2-58
Test Conditions
85°C, 1000 hours
TRF600†
Lead material Tin-plated copper, 22AWG

Insulating material Cured epoxy polymer‡
Flammability per IEC 695-2-2 Needle flame test for 20s
Solder heat withstand IEC-STD 68-2-20, Test Tb, Section 5 Method 1A, Condition B: can withstand 10 seconds at 260°C±5°C 10
Test Conditions
85°C, 1000 hours
Humidity aging 85°C, 85% RH, 1000 hours‡
‡ Excluding TRF600-150 and TRF600-400, which have a coating that is not rated for dielectric withstand and can withstand 500h at 85°C/85% RH or 1000h at 60°C/90% RH.

Table T5
Operating temperature range for all listed products is -40°C to 85°C, except for TRF250-080T and TRF250-184 (0°C to 85°C)
TS600†
Terminal material Tin-plated brass

Insulating material Nylon resin (UL94V-0), 1000V dielectric rating
Flammability IEC 695-2-2 Needle Flame Test for 20s
Solder heat withstand IEC-STD 68-2-20, Test Tb, Section 5 Method 1A
Test Conditions
85°C, 1000 hours
TSM600†
Terminal material Tin-plated brass

Insulating material Nylon resin (UL94V-0), 1000V dielectric rating
Flammability IEC 695-2-2 Needle Flame Test for 20s
Soldering characteristics EIC60068-2-58, Method 7
Solder heat withstand IEC-STD 68-2-20, Test Tb, Section 5 Method 1A
Test Conditions
85°C, 1000 hours
Storage humidity Per IPC/JEDEC J-STD-020A Level 2a
Solvent resistance MIL-STD-202, Method 215J
10 † 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements.

Table T6 Packaging and Marking Information for Telecommunications and Networking Devices

Chip* — 250VAC
TCF250
TCF250-100T 2,500 — 10,000 — —
TCF250-120T 2,500 — 10,000 — —
TCF250-145T 2,500 — 10,000 — —
TCF250-180 2,500 — 10,000 — UL
TRF250
NEW TRF250-055UT 500 — 10,000 — —
TRF250-080U 500 — 10,000 — UL, CSA, TÜV
TRF250-080U-2 — 1,500 7,500 — UL, CSA, TÜV
TRF250-080T 500 — 10,000 08F UL, CSA, TÜV
TRF250-110U 500 — 10,000 — UL, CSA, TÜV
TRF250-120 500 — 10,000 20F UL, CSA, TÜV
TRF250-120-2 — 1,500 7,500 20F UL, CSA, TÜV
TRF250-120T 500 — 10,000 20F UL, CSA, TÜV
TRF250-120T-2 — 1,500 7,500 20F UL, CSA, TÜV
TRF250-120U 500 — 10,000 20F UL, CSA, TÜV
TRF250-120U-2 — 1,500 7,500 20F UL, CSA, TÜV
TRF250-120UT 500 — 10,000 20F UL, CSA, TÜV
TRF250-145 500 — 10,000 45F UL, CSA, TÜV
TRF250-145-2 — 1,500 7,500 45F UL, CSA, TÜV
TRF250-145-RA 500 — 10,000 45F UL, CSA, TÜV
TRF250-145U 500 — 10,000 45F UL, CSA, TÜV
TRF250-145U-2 — 1,500 7,500 45F UL, CSA, TÜV
TRF250-183 500 — 10,000 83F UL, CSA, TÜV
TRF250-183-2 — 1,500 7,500 83F UL, CSA, TÜV
NEW TRF250-184 500 — 10,000 84F UL, CSA, TÜV
TS250/TSL250/TSV250
TSL250-080F-2 — 1,500 7,500 T08 UL, CSA,TÜV
TS250-130F-2 — 1,500 7,500 T13 UL, CSA, TÜV
TSV250-130F-2 — 1,200 6,000 T13V UL, CSA, TÜV
TRF600
TRF600-150 500 — 10,000 150F UL, CSA, TÜV
TRF600-150-2 — 1,500 7,500 150F UL, CSA, TÜV
TR600-150F-EX 500 — 10,000 150F UL, CSA
TR600-150F-EX-2 — 600 3,000 150F UL, CSA
TR600-150F-EX-RA-B-0.5 500 — 10,000 150F UL, CSA
10
TRF600-160 500 — 10,000 160F UL, CSA, TÜV
TRF600-160-2 — 600 3,000 160F UL, CSA, TÜV
NEW TRF600-400 500 — 10,000 400F UL, CSA
TS600/TSM600
TS600-170F-2 — 300 900 T20 UL, CSA
TS600-200F-RA-2 — 300 900 T20 UL, CSA
TS600-400F-2 — 300 900 T40 UL, CSA
TSM600-250F-2 — 200 1,000 TSM600 UL, CSA
TSM600-250F-RA-2 — 200 1,000 TSM600 UL, CSA
TSM600-400F-2 — 200 1,000 TSM600 UL

Agency Recognition for Telecommunications and Networking Devices
UL File # E74889
CSA File #78165C
TÜV Per IEC60730-1 Certificate # for individual products available upon request.
Recommended Pad Layouts for Surface-mount Telecommunications and Networking

Table T7
Devices in millimeters (inches) Nominal
Device A B C D E F G Figure
TS250 (All) 4.60 1.80 6.10 — — — — T18
(0.180) (0.070) (0.240) — — — —
TSV250 (All) 2.29 2.41 6.35 3.43 — — — T19
(0.090) (0.095) (0.250) (0.135) — — —
TSL250 (All) 3.60 1.80 5.50 — — — — T18
(0.140) (0.070) (0.220) — — — —
TS600 (All) 10.42 3.30 3.35 — — — — T18
(0.410) (0.130) (0.132) — — — —
TSM600 (All) 5.20 17.80 5.54 6.75 2.08 3.12 8.39 T20
(0.205) (0.701) (0.218) (0.266) (0.082) (0.123) (0.331)

B
A
D
A A
A E G
B B
F
B C B C
C D
Solder Reflow and Rework Recommendations for Telecommunications Surface-mount Devices
Profile Feature Pb-Free Assembly Figure T21

Average ramp up rate (TsMAX to Tp) 3°C/second max.
tp
Preheat Tp Critical Zone
Ramp up TL to Tp
• Temperature min. (TsMIN) 150°C
• Temperature max. (TsMAX) 200°C TL
TsMAX tL
• Time (tsMIN to tsMAX) 60-180 seconds
Temperature

TsMIN
• Temperature (TL) 217°C
10 • Time (tL)
Peak/Classification temperature (Tp)
60-150 seconds
260°C
ts
Preheat Ramp down

25
Time (tp) 20-40 seconds t 25˚C to Peak
Ramp down rate 6°C/second max. Reflow Profile Time
Time 25°C to peak temperature 8 minutes max.

Note: All temperatures refer to topside of the package, measured on the package
body surface.
Solder Reflow
• Recommended reflow method: IR, vapor phase oven, hot air oven.
• Surface-mount devices are not designed to be wave soldered to the bottom side of the board.
• Recommended maximum paste thickness of 0.25mm (0.010 in).
• Devices can be cleaned using standard industry methods and solvents.
Rework
• If a device is removed from the board, it should be discarded and replaced with a new device.
202 RoHS compliant, ELV compliant

Wave Soldering and Rework Recommendations for Telecommunications Radial-leaded Devices
Recommended Wave Soldering Figure T22

• Soldering temperature profile 300
10s
Temperature characteristic at component terminal with dual
250 245˚C ... 260˚C
wave soldering
Temperature (˚C)
200
Rework 150
• If a device is removed from the board, it should be discarded 100˚C ... 130˚C
and replaced with a new device. 100
Forced cooling
50
0
0 50 100 150 200 250
Time (s)
TRF250/TRF600 Tape and Reel Specifications for

Table T8
Telecommunications and Networking Device
TRF250/TRF600 devices are available in tape and reel packaging per EIA 468-B standard. See Figures T23 and T24 for details.
Dimension
Description EIA Mark IEC Mark Dimension (mm) Tolerance
Carrier tape width W W 18 -0.5/+1.0
Hold down tape width W4 W0 5 Minimum
Top distance between tape edges W6 W2 3 Maximum
Sprocket hole position W5 W1 9 -0.5/+0.75
Sprocket hole diameter D0 D0 4 ±0.2
Abcissa to plane (straight lead) H H 18.5 ±3.0
Abcissa to plane (kinked lead)* H0 H0 16 -0.5/+0.6
Abcissa to top H1 H1 32.2 Maximum
Overall width with lead protrusion — C1 43.2 Maximum
Overall width without lead protrusion — C2 42.5 Maximum
Lead protrusion L1 I1 1.0 Maximum
Protrusion of cut-out L L 11 Maximum
Protrusion beyond hold down tape I2 I2 Not specified —
Sprocket hole pitch P0 P0 12.7 ±0.3
Device pitch (TRF250 & TRF600-150) — — 12.7 —
Device pitch (TRF600-160/400) — — 25.4 —
Pitch tolerance — — 20 consecutive ±1
Tape thickness t t 0.9 Maximum
Tape thickness with splice* t1 — 2.0 Maximum
Splice sprocket hole alignment
Body lateral deviation
—
⌬h
—
⌬h
0
0
±0.3
±1.0
10
Body tape plane deviation ⌬p ⌬p 0 ±1.3
Lead spacing plane deviation ⌬P1 P1 0 ±0.7
Lead spacing* F F 5.08 ±0.6
Reel width w2 w 56 Maximum
Reel diameter a d 370 Maximum
Space between flanges less device w1 — 4.75 ±3.25
Arbor hole diameter c f 26 ±12.0
Core diameter n h 80 Maximum
Box — — 56/372/372 Maximum
Consecutive missing pieces* — — 3 maximum —
Empty places per reel* — — Not specified —
* Differs from EIA specification.

Figure T23 EIA Referenced Taped Component Dimensions for TRF Devices
Dh Dh Dp Dp
Reference plane
H1 P1 H1 C2
F H C1
L A B H0
W5
W4
W
I2
Cross section A-B
Figure T24 Reel Dimensions for TRF Devices
Reel
Upper side
n
Type
a Direction of
unreeling
Lower side
c
w1
Cross section
w2
10

Table T9 TS Tape and Reel Specifications for Telecommunications and Networking Devices
TS devices are packaged per EIA 481 and EIA 481-2 standards. See Figures T25 and T26 for details.
TS250/TSL250/TSV250
Dimension TS250 TSV250 TSL250
Description EIA Mark Dimension(mm) Tolerance(mm) Dimension(mm) Tolerance(mm) Dimension(mm) Tolerance(mm)
Carrier tape width W 16 ±0.30 16.0 ±0.30 16 ±0.30
Sprocket hole pitch P0 4.0 ±0.10 4.0 ±0.10 4.0 ±0.10
P1 12.0 ±0.10 8.0 ±0.10 8.0 ±0.10
P2 2.0 ±0.10 2.0 ±0.10 2.0 ±0.10
A0 6.9 ±0.23 5.5 ±0.10 5.5 ±0.10
B0 9.6 ±0.15 6.2 ±0.10 7.9 ±0.10
B1 max. 12.1 — 8.0 — 9.2 —
Sprocket hole diameter D0 1.5 -0/+0.1 1.55 ±0.05 1.55 ±0.05
F 7.5 ±0.10 7.5 ±0.10 7.5 ±0.10
E1 1.75 ±0.10 1.75 ±0.10 1.75 ±0.10
E2 min. 14.25 — — — — —
Tape thickness T max. 0.4 — 0.45 — 0.35 —
Tape thickness with T1 max. 0.1 — 0.1 — 0.1 —
splice cover tape thickness
K0 3.4 ±0.15 7.0 ±0.10 3.70 ±0.10
Leader min. 300 — 390 — 390 —
Trailer min. 300 — 160 — 160 —
Reel dimensions
Reel diameter A max. 340 — 340 — 340 —
Core diameter N min. 50 — 50 — 50 —
Space between flanges less device W1 16.4 -0/+2.0 16.4 -0/+2.0 16.4 -0/+2.0
Reel width W2 max. 22.4 — 22.4 — 22.4 —
TS600
Dimension
Sprocket hole pitch P0 4.0 ±0.1
P1 16 ±0.1
P2 2.0 ±0.1
A0 10 ±0.1
B0 19.2 ±0.1
B1 max. 21.6
Sprocket hole diameter D0
F
1.5
14.2
-0/+1.0
±0.1
10
E1 1.75 ±0.1
E2 min. 28.4 ±0.1
Tape thickness with splice T1 max. 0.1
K0 13.2 ±0.1
Leader min. 390
Trailer min. 160
Reel Dimensions
Reel diameter A max. 360
Core diameter N min. 50
Space between flanges less device W1 32.4 -0/+2.0

Table T9 TS Tape and Reel Specifications for Telecommunications and Networking Devices Cont’d
TS devices are packaged per EIA 481 and EIA 481-2 standards. See Figures T25 and T26 for details.
TSM600
Dimension
Sprocket hole pitch P0 4.0 ±0.1
P1 24 ±0.1
P2 2.0 ±0.1
A0 11.2 ±0.1
B0 17.8 ±0.1
B1 max. 23.45
Sprocket hole diameter D 1.5 -0/+1.0
F 14.2 ±0.1
E1 1.74 ±0.1
E2 max. 28.4 ±0.1
Tape thickness with splice T1 max. 0.1
K0 11.9 ±0.1
Leader min. 390
Trailer min. 160
Reel Dimensions
Reel diameter A max. 360
Core diameter N min. 50
Space between flanges less device W1 32.4 -0/+2.0
Figure T25 EIA Referenced Taped Component Dimensions for TS Devices

Embossment
P0
T D0 P2
E1
Cover tape
A0
F
W
E2
B1 K0 B0
10 T1 P1
Center lines
of cavity
Figure T26 EIA Referenced Reel Dimensions for TS Devices
A N (hub dia.)
Cover tape
Carrier tape
Embossed cavity

Resistance-sorted and Resistance-matched Devices
Most TCF, TRF and TS devices are available in resistance-sorted and/or resistance-matched versions.
Resistance-sorted Devices
Resistance-sorted devices (part number suffix “Rx”, where x = 1, 2, A, B, C, F etc.) are supplied with resistance values that are within
specified segments of the device’s full range of resistance.
Feature
• Narrow resistance range.
Benefits
• Greater flexibility for design engineers.
• Lower resistance devices can allow for increased loop length on line card designs.
• Higher resistance devices may provide greater protection by offering faster time-to-trip.
Resistance-matched Devices
Resistance-matched devices are supplied such that all parts in one particular package (or reel) are within 0.5Ω of each other
(1.0Ω for TRF250-080T devices). Individual matched packages are supplied from the full resistance range of the specified device.
Feature
• Tighter resistance balance between any two parts in a package.
Benefits
• Resistance-matched devices may reduce the tip-ring resistance differential, reducing the possibility of line imbalance.
Part Numbering System for Radial-leaded Telecommunications and Networking Devices

TRF*250 -120 T -RA -B-0.5 -2
Packaging
2 = Tape and Reel
0.130 = special lead length in inches
(Blank) = Bulk
B-x.x = Resistance matched in bins of x.xΩ (optional)
Rx = Resistance range (optional)
Modifier (optional)
U = Uncoated
S = Straight lead
T = Fast Trip device
Hold Current (mA)
Product Series (TRF250, TRF600)

* F = RoHS compliant, ELV compliant
10
Part Numbering System for Surface-mount Telecommunications and Networking Devices
TSx -200 F -RA -B-0.5 -2
Packaging
2 = Tape and Reel
(Blank) = Bulk
F = RoHS Compliant, ELV Compliant
Hold Current (mA)
Product Series (TS250, TSV250, TSL250, TS600, TSM600)

Part Numbering System for Chip Telecommunications and Networking Devices
TCF*250 -120 T -RA -B-0.5
Modifier (optional)
T = Fast Trip device
Hold Current (mA)
Product Series
* F = RoHS compliant, ELV compliant
10

Circuit Protection Business Unit Headquarters
308 Constitution Drive, Building H
Menlo Park, CA USA 94025-1164
Tel : (800) 227-7040, (650) 361-6900
Fax : (650) 361-4600
www.circuitprotection.com
www.circuitprotection.com.hk (Chinese)
www.tycoelectronics.com/japan/raychem (Japanese)
Raychem Circuit Protection Products Catalog 2010

SOUTH AMERICA EUROPE ASIA / PACIFIC
Overcurrent Circuit Protection • Hybrid Protection • Overvoltage Circuit Protection
Brazil UK / Eire / Benelux / Japan China, Hong Kong
Tel : 55-11-2103-6090 Israel / South Africa Tel : 81-44-900-5110 Tel : 852-2738-8181
Fax : 55-11-2103-6216 Tel : 49-89-6089485 Fax : 81-44-900-5140 Fax : 852-2735-1185
Fax : 49-89-6089394
Korea Singapore / Vietnam
Germany / Austria / Switzerland / Tel : 82-2-3415-4654 Tel : 65-6416-4205
Eastern Europe / Russia Fax : 82-2-3486-1786 Fax : 65-6481-9377
Tel : 49-89-6089584
Taiwan Thailand / Malaysia
Fax : 49-89-6089394
Tel : 886-2-8768-2788 x 211 Tel : 6-04-217-8112
Italy / Iberia Fax : 886-2-8768-1277 Fax : 6-04-229-8177
Greece / Turkey
China, Beijing Australia / Philippines
Tel : 33-1-34202261
Tel : 86-10-6569-3488 x 16522 Tel : 63-2-848-0171 x 103
Fax : 33-1-34202324
Fax : 86-10-6569-3206 Fax : 63-2-867-8661
Nordic / Baltic
China, Shanghai India
Tel : 49-89-6089485
Tel : 86-21-6106-7357 Tel : 91-80-4161-3745
Fax : 49-89-6089394
Fax : 86-21-6485-3255 Mobile : 91-99-0248-8886
France
China, Shenzhen / Guangzhou
Tel : 33-1-34202129
Tel : 86-755-2515-4797
Fax : 33-1-34202324
Fax : 86-755-2598-0419
Other Countries
Tel : 49-89-6089696
Fax : 49-89-6089394
Raychem Circuit Protection Products

©2010 Tyco Electronics Corporation. RCP0060E.0410
Catalog 2010
2Pro, microSMD, miniSMD, nanoSMD, PolySwitch, PolyZen, Raychem, TE (Logo) and Tyco Electronics are trademarks of the Tyco
Electronics group of companies and its licensors. All information, including illustrations, is believed to be reliable. Users, however,
should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no
warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics’
only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale for this product, and in no case will Tyco
Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes
without notification to Buyer—to materials or processing that do not affect compliance with any applicable specification.

Aplicaciones PTC PDF

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

Aplicaciones PTC PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aplicaciones PTC PDF

Uploaded by

Copyright:

Available Formats

Circuit Protection Business Unit Headquarters

308 Constitution Drive, Building H

Raychem Circuit Protection Products Catalog 2010

Raychem Circuit Protection Products

All other trademarks are trademarks of their respective owners.

© 2010 Tyco Electronics Corporation. All rights reserved.

Application Solution Guide 24 3

PolySwitch Resettable Devices 10

Our Product Advantage

Our Technology Advantage

Our Global Advantage

Our Employee Advantage

meeting stringent regulatory requirements and in improving equipment reliability.

add value in transient overvoltage protection for telecommunications applications.

compliance with globally recognized ISO9000/TS16949 standards.

globally, yet act locally to meet our customer needs.

Navigation and Infotainment System

circuits and small traces of the side mirror contol circuit.

One-Touch-Down Circuit for Power Windows and Power Sunroofs

One-Touch-Down Switch Traditional Design Tyco Electronics Solution

Automotive Actuators and Medium-Size DC Motors

• AHRF, AGRF, AHEF Engine Vent Motor 2

and overvoltage faults. DC Relay

Automotive Control Application and Multimedia Busses

• ESD, SESD (Data Busses only)

• AHRF, AGRF, AHEF M M M M

A. Typical H-Bridge B. Reverse Polarity C. H-Bridge Circuit with D. Equivalent Reverse

Liquid Crystal Display Backlight Heaters

CL = Current Limiting Device

GR-1089 : Public Switched Telephone Network Equipment

Switch CO Wiring MDF

CL = Current Limiting Device

CL = Current Limiting Device

Customer Premise Equipment

Telecom OV CPE OV – + Side

CL = Current Limiting Device Hook Switch

Customer Premise Equipment using 2Pro Devices

CL = Current Limiting Device

T1/E1 Central Office Transceiver Protection T1/E1 Line Repeater Protection

CL = Current Limiting Device OV = Overvoltage Device

Telecom Pass OV POTS (optional)

CL = Current Limiting Device OV = Overvoltage Device

CL = Current Limiting Device

Cable Telephony/Cable Power Passing Tap

PBX and Key Telephone Systems

Fixed scanner Credit card verification

CL = Current Limiting Device

Industrial / Appliance and HVAC

Tcoil PolySwitch device

Security and Fire Alarm Systems

Test and Measurement Equipment

CL = Current Limiting Device

RS-485 Signal with Protection Controller Protection

Controller CL (can reach up Controller

Relay Relay Relay Relay

Operator Interface Terminal

Sensor RS-232 Signal with Protection