VMC Unloaders
VMC Unloaders
com
MAIN FEATURES:
Assembled on the inlet port of an air-end housing, the intake valves of the RH & RHC Series are Normally Open (NO) and only with a vertical design. They
include a poppet operated by an internal piston controlling the air flow-rate and accordingly, the working pressure, a check valve preventing backflow of oil at
a compressor shutdown and a blow-down valve setting up the discharge time upon request. A wide range of versions of RH & RHC intake valves is available: E
(ON-OFF working system for stationary machines), PM (totally pneumatic working system for portable machines), P (hybrid working system for stationary and
portable machines), NR (only with a check valve). They are available at different voltages, if requested, as well as with connection flanges and certifications.
These valves have to be connected pneumatically to the separator tank and, where requested, electrically (in case of E & P version) to the pressure switch.
The RH & RHC Series are also available for Natural Gas and Water Lubricated applications.
MAINTENANCE:
The wear-and-tear of valve components depends on compressor applications and operating parameters. Valve inspection and ordinary maintenance are
recommended using VMC’s original spare parts kits whose instructions are indicated in the maintenance and trouble-shooting document.
Y mm - inch Ø 84 - 3,3 80x73 - 3,15x2,87 100 - 3,94 135 - 5,31 150 - 5,9
*Z_V mm - inch 132 - 5,2 155 - 6,1 100 - 3,94 194 - 7,63 150 - 5,9
K mm - inch 64 - 2,52 80,5 - 3,17 124,5 - 4,9 138,5 - 5,45
W mm - inch Rp 1” Ø 20 - 0,78 Ø 20 - 0,78 Rp 1” Ø 20 - 0,78 Ø 20 - 0,78 Ø 42 - 1,65 Ø 73 - 2,87 Ø 70 - 2,75
V mm - inch Ø 40 - 1,57 Ø 30 - 1,18 Rp 3/4” Ø 40 - 1,57 Ø 30 - 1,18 Rp 3/4” Ø 52 - 2,04 Ø 80 - 3,15 Ø 80 - 3,15
I1 mm - inch Ø 73 - 2,87 62x55 - 2,44x2,16 Ø 100 - 3,93 Ø 129 - 5,07 Ø 143 - 5,63
I2 mm - inch - Ø 115 - 4,52 Ø 150 - 5,9 Ø 170 - 6,7
I3 mm - inch Ø 7,2 - 0,28 Ø 8,5 - 0,33 Ø 9 - 0,35 Ø 12,5 - 0,49 Ø 16,5 - 0,64
I4 mm - inch - Ø 10,2 - 0,4 Ø 16,5 - 0,65 Ø 16,5 - 0,64
O1 mm - inch Ø 59,5 - 2,34 Ø 70 - 2,75 Ø 95 - 3,74 Ø 110 - 4,33
O2 mm - inch Ø 63,5 - 2,5 Ø 76 - 3 Ø 101 - 3,97 Ø 118 - 4,64
O3 mm - inch - Ø 82 - 3,22 Ø 107 - 4,2 -
O4 mm - inch - Ø 88 - 3,46 Ø 113 - 4,45 -
Weight kg - lb 0,6 - 1,32 0,8 - 1,76 1,5 - 3,3 2 - 4,4
Attention: The drawing below is not suitable for all models. Please log on to our website for specific drawings.
INTAKE VALVE www.vmcitaly.com
C SERIES www.vmc-usa.com
MAIN FEATURES:
Assembled on the inlet port of an air-end housing, the intake valves of
the C Series are Normally Open (NO) and only with a horizontal design.
They include a poppet operated by an internal piston controlling the air
flow-rate and accordingly, the working pressure, a check valve preventing
backflow of oil at a compressor shutdown and a blow-down valve setting
up the discharge time upon request. A wide range of versions of C intake
valves is available: E (ON-OFF working system for stationary machines),
PM (totally pneumatic working system for portable machines), P (hybrid
working system for stationary and portable machines), NR (only with a
check valve). They are available at different voltages, if requested, as
well as with connection flanges and certifications.These valves have to
be connected pneumatically to the separator tank and, where requested,
electrically (in case of E & P version) to the pressure switch.
The C serie is also available for Natural Gas and Water Lubricated applications.
MAINTENANCE:
The wear-and-tear of valve components depends on compressor applications
and operating parameters. Valve inspection and ordinary maintenance are
recommended using VMC’s original spare parts kits whose instructions are
indicated in the maintenance and trouble-shooting document.