Far 2825 Sme

Back
Addenda No.7 to FAR/FR-2805 Service Manual, Pub.No. SME-34040
FAR/FR-2815/2825/2825W
Using FR-2105 Scanner Unit
From production in January 2000, the scanner unit of FAR/FR-2815/2825/2825W was

changed to one used for FR-2105 series radars. No modification was made to the
display unit.
Old and new RF modules and antennas are not compatible mechanically. When
servicing, correct parts should be arranged.
Model Unit Old New Remarks

FAR/FR- Scanner Unit C2P7N2N (24rpm) RSB-0074 (24rpm) Same as
2815 Housing FR-2115
RSB-0068 (42rpm) RSB-0075 (42rpm) Same as
FR-2115
RSB-0063 (36rpm) None
RTR-028 Same as
RF Module RTR-062
FR-2115
Radiator XN-2/3/3A/4A XN-12AF/20AF/24AF Same as
FR-2115
Inst. Materials CP03-14401 CP03-19104
FAR/FR- RSB-0014 (24rpm) RSB-0074 (24rpm) Same as
Scanner Unit
2825 FR-2125
Housing Same as
RSB-0069 (42rpm) RSB-0075 (42rpm)
FR-2125
RSB-0064 (36rpm) None
RTR-029 RTR-063 Same as
RF Module
FR-2125
Radiator XN-2/3/3A/4A XN-12AF/20AF/24AF Same as
FR-2125
Inst. Materials CP03-14401 CP03-19104
FAR/FR Scanner Unit RSB-0041 RSB-0076 Same as
-2825W Housing (220 V, 3 phases) (200/220 V, 3 phases) FR-2125W
RSB-0042 RSB-0077 Same as
(440 V, 3 phases) (380/440 V, 3 phases) FR-2125W
RSB-0043 None
(115 V, 1 phase)
RSB-0046 None
(220 V, 1 phase)
Radiator XN-3A/4A XN-20AF/24AF Same as
FR-2125W
Inst. Materials CP03-13904 Same as left
Refer to the FR-2105 service manual for block diagram, location of parts, check points,
and schematic diagrams for new scanner unit.
Addenda No. 8 to FR/FAR-2805 Service Manual, Pub. No. SME-34040
RP-25 (FR/FAR-2805 Series)

New Type of RP Board
The RP Board is changed physically from the production in April 2000 and after,
because of the discontinuity of the connector used on the board. The new board
14P0262A has a larger connector compared with the old one. The RP board fixing
plate is also changed.
No compatibility exists between old and new boards and plates.

(Same in circuitry but different in physics)
There are three types of the fixing plate; first, it was changed when the CRT type was
changed, and second, when the RP board was changed.
RP Board
RP board fixing plate
Figure 1 FAR-2805 series Display Unit, Front View
Table 1 List of RP Boards
Date of Until Dec. January1998 to After April 2000

Production 1997 March 2000
CRT type CDT-2901B-1A CDMC-29CF301
Parts Name RP Board RP Board RP Board
Type 14P0262 14P0262 14P0262A
(14P0262-33) (14P0262-33) (14P0262-44)
Fixing Plate*
*: The RP board
comes with the
fixing plate fitted.
Type:03-133-1146-1 Type: 03-133-1171-0 Type: 03-133-1171-1

Code No. 008-467-640 008-474-270 008-473-640
1/2
Addenda No. 9 to FR/FAR-2805 Service Manual, Pub. No. SME-34040
FAR/FR-2805 Series
New Monitor featuring complete EMC
The 28-inch monitor has been changed to feature complete EMC which complies to the
IEC 60945 3rd edition and EMC directive 89/336/EEC from the production in May 2000.
The new monitor is compatible with old one but it has an additional JUNCTION board.
Type of New Monitor: CDMC-29CF302 (Old type: CDMC-29CF301)

Code Number of New Monitor: 000-143-491
The following table lists the maintenance parts for old and new monitors. The same MAIN
board and FB transformer are used for both types.
Table 1. Maintenance Parts List for 28-inch monitor

Parts Name Type Code No. Remarks
(1) CRT 29CF CRT(S)ASS 000-790-226 Old type
(2) CRT 29CF CRT(S)ASS(1) 000-790-382 New type
(3) PS * CDUC-29CF301 PS(S) 000-790-227 Old type
Incl. VIDEO, CDT boards
(4) PS * CDUC-29CF301 PS(S)(1) 000-790-383 New type
Incl. VIDEO, CDT,
JUNCTION boards
(5) FB Transformer FBT-2436469 000-790-228 For new and old types
(6) MAIN Board CDUC-29CF301MAIN(S) 000-790-229 For new and old types
*: New PS is the same as the old one in circuitry.
When the CRT and PS board for old type is out of stock, ones for new type are supplied.
The parts for new monitor can be used for old monitor as described in the table 2 on the
next page.
Related Furuno Information: FQ3-99-004

2/2
Table 2. How to use new parts for old monitor
Part to be changed Replaced with Connections

Old CRT, New CRT, Connector (a): not used
29CF CRT(S)ASS 29CF CRT(S)ASS(1) Connector (b): Connected to MAIN board.
Old PS, New PS, Connector from the CRT neck is
CDUC-29CF301 PS(S) CDUC-29CF301 PS(S)(1) connected to MAIN board. Connector (c):
not used
Old CRT and old PS New CRT and new PS See Figure 1.
New CRT Old CRT Connector from the CRT neck is
connected to MAIN board. Connector (c):
not used
New PS Old PS Impossible because PS board does not
have fixing holes for JUNCTION board.
VIDEO and CDT boards are replaceable.
BLU
BLK
(a)
(b)
(c )
JUNCTION To MAIN
Board board
JUNCTION board is piggyback mounted on the PS board.
Figure 1 Connections on JUNCTION board of new monitor,

CDMC-29CF302

Far 2825 Sme

Uploaded by

Copyright:

Available Formats

Far 2825 Sme

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Far 2825 Sme

Uploaded by

Copyright:

Available Formats

What changes were made to the scanner unit of FAR/FR-2815/2825/2825W?

What changes were made to the scanner unit of FAR/FR-2815/2825/2825W?

What changes were made to the RP board of the FR/FAR-2805 series?

What changes were made to the RP board of the FR/FAR-2805 series?

Back

Addenda No.7 to FAR/FR-2805 Service Manual, Pub.No. SME-34040

From production in January 2000, the scanner unit of FAR/FR-2815/2825/2825W was

Model Unit Old New Remarks

RP-25 (FR/FAR-2805 Series)

No compatibility exists between old and new boards and plates.

Figure 1 FAR-2805 series Display Unit, Front View

Table 1 List of RP Boards

Date of Until Dec. January1998 to After April 2000

Type:03-133-1146-1 Type: 03-133-1171-0 Type: 03-133-1171-1

Addenda No. 9 to FR/FAR-2805 Service Manual, Pub. No. SME-34040

Type of New Monitor: CDMC-29CF302 (Old type: CDMC-29CF301)

Table 1. Maintenance Parts List for 28-inch monitor

Related Furuno Information: FQ3-99-004

Table 2. How to use new parts for old monitor

Part to be changed Replaced with Connections

Figure 1 Connections on JUNCTION board of new monitor,

You might also like