LTG (Luv D-Max)

LIGHT DUTY VEHICLE
(TF* & UC* - NEW CAB MODEL)

LABOR TIME GUIDE
FOREWORD
These Labor Time allowances are published by ISUZU for the purpose of imple-
menting the terms of the current Warranty Claim Processing Manual and are
intended for the purpose of computing the compensation payable by ISUZU
MOTORS LIMITED for the performance of warranty, policy and campaign adjust-
ments and other work authorized and performed for the account of ISUZU. The
use of these allowances for any other purposes will be at the discretion of each
dealer. All time allowances are subject to change at any time by ISUZU based on
time studies by ISUZU related to improved methods, techniques or equipment or
other advances in the industry.
ISUZU MOTORS LIMITED
Publication No. L1G-LE-0375

Printed in Japan
INTRODUCTION
This Labor Time Guide is designed for more POLICY CODES

convenient and accurate use. The guide is identi-
cal in page format to all Labor Time Guides pro- The policy codes applicable to any labor
duced by ISUZU. In addition to the uniform page operation(s) are noted under the major operation
layout, the Operation Description and Numbering description (if they apply to all operations) or to
System is now standard for all ISUZU vehicles. the left of a particular operation if the operations
listed under a major labor operation description
have different policy requirements. Each letter
PAGE LAYOUT indicates a policy as it applies to an Operation.
Below is a listing of the Policy Codes and
To aid in the use of the Time Guide, the Descriptions used in this publication.
layout has been structured in reading sequence.
Reading from left to right are the “Operation P– Power train
Description” and its qualifiers, followed by the A– Requires Authorization
“Operation Numbers”. On the right hand side of T– Towing Allowed
the page is an area designating the vehicles by E– Emission Related Operation
series with their appropriate times.
OPERATION DESCRIPTION
MAJOR OPERATIONS allowable on that component. These notations,

plus the description of same, are provided below:
Operations having a labor operation number
(A1234) are classified as Major Operations. A REPLACE (as a single action word)
major operation time allowance is sufficient to do The “REPLACE” notation is used when the
the work described as a single operation. part or an assembly is subject to replacement
only. A part is required on the warranty claim.
Operations within each section are generally
arranged in the following manner – Front to R&R (as a single action word)
Rear, Top to Bottom, Right to Left. Sitting in the “R&R” notation indicates the part or assem-
driver’s seat, Right-Hand components are to the bly is repairable and can be removed, repaired,
Driver’s Right, Left-Hand to the Driver’s Left. and reinstalled. All labor operations so noted are
followed by “ADD” statements which cover all
possible repair conditions. This can be a labor
ADD CONDITIONS only operation.
Additional time allowances which may be REPAIR
required for performing a Major Operation or sup- ALIGN (as a single action word)
plement a Major Operation are included in the ADJUST
“ADD” sections under vehicle designation. Each TIGHTEN
“add” is preceded by a letter designation (A, B, The above notation indicate the work (repair)
C, ~) which should be placed on the dealer repair to be performed. This can be a labor only opera-
order under the 5-Position Major Operation Num- tion.
ber if the “ADD” is performed. These letters are
not to appear on the Warranty Claim. REPAIR OR REPLACE
R&R OR REPLACE
The above notations indicate the part or
ACTION WORDS assembly can be repaired, aligned or adjusted on
the vehicle or removed, repaired, and/or
Each labor operation description has been reinstalled or replaced, depending on the extent
revised to clearly identify the repair that is of failure. This can be a labor only operation
when no part or assembly is required.
RECONDITION Some repair operation time allowances are
When this term is used with a Major Opera- developed from data which indicates that most
tion, it means to remove an assembly from the repairs can be performed in the published time. It
vehicle, disassemble, clean and inspect all parts, is reasonable to assume that additional time may
rebuild the assembly with the same or new parts, be required when unusual conditions are encoun-
reinstall and adjust. When this term is used in an tered. An authorization is required for the addi-
ADD Operation, it does not include Remove and tional time.
Reinstall but only that work necessary to recondi-
tion an assembly once it is removed from the
vehicle. DIAGNOSIS TIME
“Repair diagnosis” time is included in all

INCLUDES established labor time operations where it is
required of the technician to perform the opera-
The Includes which follow some of the tion. It is the responsibility of qualified superviso-
descriptions are provided to assist in knowing ry personnel to assist technicians in “customer
whether or not certain items or functions are problem analysis” and “symptom diagnosis”.
included within the operation. These are not all Service personnel should be contacted for
encompassing because to place all such data in assistance in circumstances requiring extensive
the Guide would make it difficult to use. If there diagnosis. Time for extensive diagnosis will
are any questions as to whether something is require authorization if deemed allowable.
included or not, the Request for Review form may Following are definitions of the terms used in
be used to question or recommend changes. the preceding statement:
“Customer Problem Analysis” – The process
NOTES of translating the customer’s problems to a
symptom. Examples are: A/C insufficient cooling,
Throughout the Time Guide, various notes brakes pull, engine diesels, hesitates, surges, etc.
will be inserted to assist in the use of the Guide. It also includes those failures which are readily
apparent to the normal senses of sight, touch,
sound and smell. Defining these is the duty of the
TIME ALLOWANCES dealership service management and/or service
writer.
All time allowances as indicated in hours and “Symptom Diagnosis” – The process of
tenths of hours published in this guide (except finding the source of a problem based on a
for a few Repair Operations) are based on studies detailed symptom. Symptom diagnosis is com-
of the actual time required to complete the plete when the problem has been found.
operation. No connection with technicians’ “Repair Diagnosis” – The checks, tests and
wages is implied since they are dependent upon measurements needed in the repair to find the
the dealer technician pay plan in use. cause of failure, or identify faulty parts.
The time allowances published have been Examples Are:
determined by performing the operation a suffi-
cient number of times to establish an average ● cleaning and inspection of all parts such
time or to determine that a fair and equitable time as gears and clutch plates;
has been developed. Standard technicians’ hand ● use of common testers such as an ohm-
tools and dealer essential and available tools are meter, voltampere meter or timing light that are
used in performing time studies. No power oper- included in the service manual procedure.
ated wrenches are used for time studies. Pro-
cedures outlined in Service Manuals, other Ser-
vice Publications and good shop practices are
used as a guide when performing the work
necessary to establish time allowances.
The time allowance includes the actual time
required to perform the operation plus an addi-
tional allowance to provide for operating varia-
bles. Time allowances do not include time to
remove and replace special equipment other than
manufacturer options and accessories.
REQUEST FOR REVIEW
Any questions relating to suggested new or
existing operations and/or time allowances in this
time guide should be submitted on a “Request
for Review” form. These forms can be found at
the end of this Manual. When completing this
form, it is important that vehicle identification
data affecting or influencing the operation in
question be provided. It is also important to sub-
mit a complete (detailed) description of the work
performed. The statement “followed Shop Manual
Procedure” is generally not a sufficient explana-
tion of the procedure followed. Generally, a tech-
nician performs the steps of an operation in a
sequence which is comfortable to him/her and it
is their procedure which we would like to review
and compare with ours. The “Request for
Review” form is primarily intended for your use
to inform us of a problem affecting the ability of
technicians to perform an operation within the
published time allowance. The request should be
forwarded to the address indicated on the form.
All inquiries received at the home office will
be acknowledged and reviewed. A review will be
conducted of the Labor Time Guide text and pro-
cedure as outlined by the model year service
manual and dealer bulletins, restudies will be
conducted as required.
VEHICLE AND ENGINE IDENTIFICATION
The Engine Code designation from the Ve-

hicle Identification Number (VIN) is used to iden-
tify the appropriate engine mechanical sections
within this publication. Refer to the VIN chart for
engine identification codes.
ABBREVIATIONS
Abbreviations will be used through the Labor Time Guide. Below is a list of
abbreviations and their meaning.
Abbrevia- Abbrevia-
Description Description
tions tions
A/C Air Conditioning EXC Except

ADD Addition INC Includes
ADJ Adjust I/P Instrument Panel
AIR Air Injector Reactor MAN Manual
ASSY Assembly NEC Necessary
AUTO Automatic OHC Overhead Camshaft
CONT’D Continued P/S Power Steering
CV-JOINT Constant Velosity R&R Remove and Reinstall
CYL Cylinder TRANS Transmission
D&C Disconnect And Connect TPS Throttle Position Sensor
DIFF Differential TURBO Turbocharger
DOHC Double Overhead Camshaft T.V. Throttle Valve
ECM Electronic Control Module VIN Vehicle Identification Number
EFE Early Fuel Evaporation W/ With
EGR Exhaust Gas Recirculation W/O Without
REQUEST FOR REVIEW FORM
DEALERSHIP INFORMATION
A REVIEW OF LABOR OPERATION
FRANCHISE NAME:
NUMBER WITH A
ISUZU DEALER CODE:
OPERATION DESCRIPTION OF
SUBMITTED BY:
IS REQUESTED BECAUSE: SERVICE MGR. SIGNATURE:
A New Labor Operation description is recommended DISTRIBUTOR USE ONLY

(Record your suggestion in technicians comments)
Published Time is insufficient YES NO
(Completion of step by step labor description on Does the labor listed on the reverse side follow
reverse side is required) the Isuzu Service Manual?
Is the repairing technician Isuzu trained?
Operation Description is incorrect
(Record you suggestion in tech comments) Did you verify the availability/condition of the
essential tools required for this repair?
Other — (Describe in Technicians Comments section)
Did you review this request with both the
Technicians Comments: technician and service manager?
SIGNATURE
recommendation/comments:
SIGNATURE
LABOR OP #
OPERATION DESCRIPTION
STEP DESCRIPTION OF BASIC STEPS TIME
NO. IN MIN.
STEP DESCRIPTION OF BASIC STEPS TIME

NO. IN MIN.
The actual time required to perform this labor operation in our shop is hr.
Vehicle Information
VIN # Engine Family Trans #
Rear Axle # Body Type Special Equip.
Additional Comments:
TROUBLE CODES
1 BROKEN 43 SHIFTS HARD
2 BROKEN WELD 44 SLIPS OUT OF GEAR
3 STRIPPED 45 WIND NOISE
4 TORN OR PUNCTURED 46 FLOODS
5 CRACKED 47 FLAT SPOT OR HESITATES
6 WORN 48 DISCOLORED
7 SCORED OR SCRATCHED 49 PITTED
8 POOR METAL FINISH 50 ELECTRICAL FAILURES
9 CHIPPED 51 NOT CONNECTED
10 SOILED OR STAINED 52 BINDS, STICKS
11 BENT 53 NOT DRILLED
12 FOREIGN MATERIAL 54 WRONG PART
13 OVERHEATED 55 POOR FIT
14 BURNED 56 INOPERATIVE
15 SEIZED 57 REGISTERS INCORRECTLY
16 PAINT - DIRT OR FOREIGN 58 PART IMPROPERLY INSTALLED
MATERIAL 59 PULLS
17 PAINT - DRY SPRAY, MOTTLING 60 ENGINE PING
SAGS, 61 INCORRECT PRESSURE
OFF-COLOR, ROUGH 62 IMPROPER CLEARANCE
18 PAINT - FILM MARRED OR 63 FADE OR HARD PEDAL
SCRATCHED 64 GLAZED
19 PAINT - THIN OR RUBBED THROUGH 65 SLIPS
20 PAINT - CORROSION, CRAZING, 66 COLLAPSED
CRACKING, CHALKING 67 EXCESSIVE LUBRICATION OR OIL
21 PAINT - POOR REPAIR SOAKED
22 PAINT - FILM SPOTTED 68 INSUFFICIENT LUBRICATION
23 PAINT - FINISH COMES OFF 69 POOR OIL MILEAGE
24 CHROME PLATING DEFECTIVE 70 POOR GASOLINE MILEAGE
25 MISALIGNED 71 PULLED LOOSE
26 MISADJUSTED 72 SPLIT SEAMS
27 LOOSE 73 IMPROPERLY PADDED
29 PART OMITTED 74 FUMES
30 POROSITY 75 RUSTED OR CORRODED
31 POOR MACHINING 76 WRINKLED
32 GLASS - POOR VISION 78 CARBON DEPOSIT
33 WEAK 79 POOR RELEASE
34 OUT OF BALANCE 81 HARD RIDE
35 OUT OF ROUND 82 SURGE
36 VIBRATES 83 HARD STARTING (COLD)
37 POOR ENGAGEMENT 84 HARD STARTING (HOT)
38 DOES NOT SEAT 85 SHEARED
39 GRABS 93 DISCHARGED
40 NOISY 95 SPECIAL POLICY
41 CHATTERS 96 CAMPAIGN
42 LEAKS
A PAINT A
PAINT A - 3
PAINT EXTERIOR
CAB STYLE
OPERATION DESCRIPTION OPERATION
VIN CODE
NUMBER
TF* UC*
NOTE: All paint operations are ST (straight time) operation which requires
time documentation as detailed in the claims processing manual.
Authorization request is required beyond 1.5 hours.
BUMPER, FRONT
COLOR COAT; ONE PIECE A0028 ST ST
GRILLE
INC: R&R grille, emblem and headlight bezels.
COLOR COAT A0260 ST ST
HOOD
COLOR COAT; COMPLETE A0347 ST ST
PANEL, SHROUD UPPER AND/OR VENT GRILLE

WHEEL OPENING EXTENSION, FRONT

COLOR COAT; RIGHT A0650 ST ST
COLOR COAT; LEFT A0651 ST ST
FENDER, FRONT COMPLETE

DOES NOT INC: Fender extension.
ALLIGATOR TYPE HOOD; COLOR COAT; RIGHT A0680 ST ST
ALLIGATOR TYPE HOOD; COLOR COAT; LEFT A0681 ST ST
PILLAR, WINDSHIELD
ROOF
POLICY: A
Except SPOT REPAIR
A - 4 PAINT
PAINT EXTERIOR
CAB STYLE
VIN CODE
NUMBER
TF* UC*
PILLAR, CENTER
ROCKER
FRAME, FRONT DOOR WINDOW

DOOR, FRONT
INC: Door window frame, R&R mirror.
DOES NOT INC: Drivers vent. On aluminum tilt series,
Use spot repair for vent.
PANEL, CAB BACK

POLICY: A
Except SPOT REPAIR
COLOR COAT A1360 ST -
FRAME, REAR DOOR WINDOW

DOOR, REAR
QUARTER (COMPLETE)
PAINT A - 5
PAINT EXTERIOR
CAB STYLE
VIN CODE
NUMBER
TF* UC*
LOAD FLOOR
WHEEL OPENING EXTENSION, REAR

TAILGATE, COMPLETE
REAR BUMPER
WHEELS
COLOR COAT; RIGHT FRONT A3300 ST -
COLOR COAT; LEFT FRONT A3301 ST -
COLOR COAT; RIGHT REAR A3320 ST -
COLOR COAT; LEFT REAR A3321 ST -
B BODY EXTERIOR
B
BUMPERS, DOORS AND EXTERIOR TRIM B - 7
BUMPER AND FRONT END

CAB STYLE
VIN CODE
NUMBER
TF* UC*
BUMPER ASSEMBLY, FRONT - REPLACE B0048 .4 .4
BAR, FRONT BUMPER FACE - REPLACE B0210 .4 .4
REINFORCEMENT ASSEMBLY, FRONT BUMPER - REPLACE B0215 .4 .4
BAR, IMPACT, FRONT - REPLACE B0230 .4 .4
BUMPER ASSEMBLY, FRONT - ALIGN B0260 .2 .2
BAR, REAR BUMPER FACE - REPLACE B0800 .4 .4
SHEET, NONSLIP, REAR BUMPER - REPLACE B0850 .6 -

ADD:
A - To replace bumper back bar (either right or left)............................................................ .2 -
BUMPER ASSEMBLY, REAR - ALIGN B0860 .5 .5
BUMPER AND/OR STEP ASSEMBLY, REAR - REPLACE B0880 .4 .4

ADD:
A - For Pick Up Model.......................................................................................................... .2 -
REINFORCEMENT ASSEMBLY, REAR BUMPER - REPLACE B0890 .4 .4
SIDE GUARD, BUMPER, REAR - REPLACE

RIGHT B0891 .2 -
LEFT B0892 .2 -
GRILLE ASSEMBLY - REPLACE

ONE PIECE B1308 .2 .2
HOOD ASSEMBLY, ENGINE - R&R OR REPLACE B1490 .3 .3
HOOD ASSEMBLY - ALIGN B1500 .3 .3

INC; Adjust bumper and/or latch.
B - 8 BUMPERS, DOORS AND EXTERIOR TRIM

CAB STYLE
VIN CODE
NUMBER
TF* UC*
INSULATION, ENGINE HOOD - REPLACE B1510 .3 .3
LATCH, HOOD - R&R OR REPLACE B1540 .4 .4
SUPPORT, HOOD LATCH - REPLACE B1550 .4 .4
ROD, HOOD SUPPORT - REPLACE B1600 .2 .2
CABLE, HOOD LATCH - R&R OR REPLACE B1630 .6 .6
BUMPERS, HOOD - REPLACE B1650 .2 .2
HINGE, HOOD - REPLACE

RIGHT B1710 .3 .3
LEFT B1711 .3 .3
BOTH B1717 .5 .5
SKIRT, FRONT FENDER INNER - REPLACE

RIGHT B1860 .3 .5
ADD:
A - For Wagon Model.......................................................................................................... .2 -
LEFT B1861 .3 .5
ADD:
A - For Wagon Model.......................................................................................................... .2 -
BOTH B1867 .6 .9
ADD:
A - For Wagon Model.......................................................................................................... .3 -
FENDER, FRONT - R&R OR REPLACE

RIGHT B1870 .7 .7
LEFT B1871 .7 .7
FENDER, FRONT - ALIGN

RIGHT B1880 .3 .3
LEFT B1881 .3 .3

CAB STYLE
VIN CODE
NUMBER
TF* UC*
WHEEL OPENING EXTENSION, FRONT - REPLACE

RIGHT B1890 .2 .2
LEFT B1891 .2 .2
BOTH B1897 .3 .3
ADD:
A - To Replace Front Bumper Extension One.................................................................... .2 .2
B - To Replace Front Bumper Extension Two.................................................................... .4 .4
SKIRT, REAR FENDER INNER - REPLACE

RIGHT B1901 .3 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 .1
LEFT B1902 .3 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 .1
CROSSMEMBER, TRANSMISSION MOUNTING - R&R OR REPLACE B1932 .5 .5
STEP ASSEMBLY, BODY SIDE - REPLACE

RIGHT B1940 .5 .5
LEFT B1941 .5 .5
DOORS AND REAR COMPARTMENT

CAB STYLE
VIN CODE
NUMBER
TF* UC*
DOOR ASSEMBLY, FRONT - ALIGN

RIGHT B4000 .6 .6
LEFT B4001 .6 .6
DOOR ASSEMBLY, FRONT - R&R

RIGHT B4005 1.2 1.2
LEFT B4006 1.2 1.2
HINGE, FRONT DOOR (BOLT ON) - REPLACE

INC: Adjust door lock striker plate and door assy to door opening.
RIGHT UPPER B4012 .4 .4
LEFT UPPER B4013 .4 .4
RIGHT LOWER B4014 .4 .4
LEFT LOWER B4015 .4 .4
CHECK ASSEMBLY, FRONT DOOR - REPLACE

RIGHT B4070 .4 .4
LEFT B4071 .4 .4
HANDLE, FRONT DOOR OUTSIDE - REPLACE

RIGHT B4120 .3 .3
LEFT B4121 .3 .3
CYLINDER SET, LOCK - REPLACE B4170 .7 .8

ADD:
A - For Wagon Model.......................................................................................................... .1 -
CYLINDER, FRONT DOOR LOCK - R&R OR REPLACE

RIGHT B4180 .3 .3
LEFT B4181 .3 .3
STRIKER, FRONT DOOR LOCK - REPLACE

DOES NOT INC: Aligning door assy. to door opening.
RIGHT B4240 .2 .2
LEFT B4241 .2 .2

CAB STYLE
VIN CODE
NUMBER
TF* UC*
LOCK, FRONT DOOR - R&R OR REPLACE

RIGHT B4260 .6 .6
LEFT B4261 .6 .6
HANDLE, FRONT DOOR INSIDE OPENING - R&R OR REPLACE

RIGHT B4280 .2 .2
LEFT B4281 .2 .2
CHECK ASSEMBLY, REAR DOOR - REPLACE

RIGHT B4340 .3 .3
LEFT B4341 .3 .3
KNOB, FRONT DOOR INSIDE LOCKING - REPLACE

RIGHT B4350 .2 .2
LEFT B4351 .2 .2
ROD, FRONT DOOR INSIDE LOCKING - R&R OR REPLACE

RIGHT B4360 .6 .6
LEFT B4361 .6 .6
DOOR OPENING EXTENSION, REAR - REPLACE

RIGHT B4390 .2 .2
LEFT B4391 .2 .2
DOOR ASSEMBLY, REAR - ALIGN

RIGHT B4400 .3 .3
LEFT B4401 .3 .3
DOOR ASSEMBLY, REAR - R&R

RIGHT B4405 1.2 1.2
LEFT B4406 1.2 1.2

CAB STYLE
VIN CODE
NUMBER
TF* UC*
HINGE, REAR DOOR (BOLT ON) - REPLACE

RIGHT UPPER B4412 .4 .4
LEFT UPPER B4413 .4 .4
RIGHT LOWER B4414 .4 .4
LEFT LOWER B4415 .4 .4
HANDLE, REAR DOOR OUTSIDE - REPLACE

RIGHT B4520 .4 .4
ADD:
LEFT B4521 .4 .4
ADD:
STRIKER, REAR DOOR LOCK - REPLACE

RIGHT B4640 .2 .2
LEFT B4641 .2 .2
LOCK, REAR DOOR - R&R OR REPLACE

RIGHT B4660 .4 .4
ADD:
LEFT B4661 .4 .4
ADD:
HANDLE, REAR DOOR INSIDE OPENING - R&R OR REPLACE

RIGHT B4700 .2 .2
LEFT B4701 .2 .2

CAB STYLE
VIN CODE
NUMBER
TF* UC*
KNOB, REAR DOOR INSIDE LOCKING - REPLACE

RIGHT B4720 .2 .2
LEFT B4721 .2 .2
ROD, REAR DOOR INSIDE LOCKING - R&R OR REPLACE

RIGHT B4730 .4 .4
ADD:
LEFT B4731 .4 .4
ADD:
BOX, PICKUP - ALIGN AND/OR R&R B5300 .7 -
SUPPORT, REAR COMPARTMENT LID AND/OR TAILGATE COUNTERBALANCE

(GAS TUBE) - REPLACE
RIGHT B5450 .2 .2
LEFT B5451 .2 .2
BOTH B5457 .3 .3
TAILGATE ASSEMBLY, REAR BODY - ALIGN B5700 .2 -
TAILGATE ASSEMBLY, REAR BODY - REPLACE B5705 .5 -
HINGE, TAILGATE, REAR BODY - REPLACE

RIGHT B5710 .2 -
LEFT B5711 .2 -
LINK ASSY, TAILGATE, REAR BODY - R&R OR REPLACE

RIGHT B5720 .2 -
LEFT B5721 .2 -
BOTH B5727 .2 -

CAB STYLE
VIN CODE
NUMBER
TF* UC*
STRIKER, TAILGATE LOCK, REAR BODY - R&R OR REPLACE

RIGHT B5820 .2 -
LEFT B5821 .2 -
BOTH B5827 .2 -
LOCK, TAILGATE, REAR BODY - R&R OR REPLACE B5830 .3 -
HANDLE ASSEMBLY, TAIL GATE, OUTSIDE - REPLACE B5835 .3 -
RUBBER, BUMPER, SIDEGATE AND/OR TAILGATE - REPLACE

ONE OR ALL B5850 .2 -
DOOR ASSEMBLY, BACK DOOR - ALIGN B6000 .2 .2
DOOR ASSEMBLY, BACK DOOR - R&R

ONE PIECE B6108 .6 .6
HINGE, BACK DOOR - REPLACE

RIGHT B6112 .5 .5
LEFT B6113 .5 .5
HANDLE, BACK DOOR - REPLACE

OUTSIDE B6160 .3 .3
CYLINDER, BACK DOOR LOCK - R&R OR REPLACE B6180 .2 .2
STRIKER, BACK DOOR LOCK - REPLACE

CENTER B6191 .2 .2
LOCK, BACK DOOR - R&R OR REPLACE B6197 .3 .3
LID, FUEL FILLER - REPLACE B6701 .2 .2


CAB STYLE
VIN CODE
NUMBER
TF* UC*
CABLE, RELEASE, FUEL FILLER LID - REPLACE B6702 .9 1.0

ADD:
A - For Wagon Model.......................................................................................................... .1 -
KNOB, RELEASE CABLE, FUEL FILLER LID - REPLACE B6703 .3 .3
WHEEL OPENING EXTENSION, REAR - REPLACE

RIGHT B6710 .2 .2
LEFT B6711 .2 .2
BOTH B6717 .3 .3
EXTERIOR TRIM
CAB STYLE
VIN CODE
NUMBER
TF* UC*
EMBLEM, GRILLE - REPLACE B7100 .2 .2

INC: R&R grille if nec.
PLATE, MODEL DESIGNATION - REPLACE

ONE B7390 .2 .2
MOULDING, ROOF - REPLACE B7790 .2 .3

ADD:
A - Additional each moulding............................................................................................... .2 .2
B - For Wagon Model.......................................................................................................... .1 -
MOULDING, DOOR - REPLACE B7795 .2 .2

ADD:
A - Additional each moulding............................................................................................... .2 .2
C BODY INTERIOR
C
C - 10 GLASS, INTERIOR TRIM AND SEATS
GLASS AND ATTACHING PARTS

CAB STYLE
VIN CODE
NUMBER
TF* UC*
GLASS, WINDSHIELD - RESEAL C0020 .5 .5

NOTE: This is a st (straight time) operation which requires time
documentation as detailed in the claims processing manual.
Authorization request is required beyond .5 hours.
INC: Water test.
GLASS, WINDSHIELD - REPLACE

INC: Water test and extra man's assistance.
ONE PIECE C0034 1.2 1.2
MIRROR, INSIDE REAR VIEW - REPLACE C0040 .2 .2
GLASS, FRONT DOOR - ALIGN

RIGHT C0100 .5 .5
LEFT C0101 .5 .5
GLASS, FRONT DOOR - R&R

INC: Nec lubrication and adjustments.
RIGHT C0110 .4 .4
LEFT C0111 .4 .4
GLASS, FRONT DOOR - REPLACE

INC: Nec lubrication and adjustments.
RIGHT C0114 .4 .4
LEFT C0115 .4 .4
WAIST SEAL AND/OR RETAINER, FRONT DOOR WINDOW INNER -

R&R OR REPLACE
RIGHT C0120 .2 .2
LEFT C0121 .2 .2
WAIST SEAL, FRONT DOOR WINDOW OUTER - R&R OR REPLACE

RIGHT C0130 .2 .2
LEFT C0131 .2 .2
GLASS, INTERIOR TRIM AND SEATS C - 11

CAB STYLE
VIN CODE
NUMBER
TF* UC*
CHANNEL, FRONT DOOR WINDOW RUN - R&R OR REPLACE

INC: R&R door glass as nec.
RIGHT C0140 .5 .5
LEFT C0141 .5 .5
EXTENSION, FRONT DOOR WINDOW CHANNEL (AT REAR) - R&R OR REPLACE

RIGHT C0160 .5 .5
LEFT C0161 .5 .5
HANDLE, FRONT DOOR WINDOW REGULATOR - REPLACE

RIGHT C0170 .2 -
LEFT C0171 .2 -
REGULATOR, FRONT DOOR WINDOW (MANUAL) - R&R OR REPLACE

INC: D&C glass, prop in up position and transfer motor where nec.
RIGHT C0180 .5 -
LEFT C0181 .5 -
REGULATOR, FRONT DOOR WINDOW (POWER) - R&R OR REPLACE

INC: D&C glass, prop in up position and transfer motor where nec.
RIGHT C0182 .5 .5
LEFT C0183 .5 .5
GLASS, REAR DOOR - ALIGN

RIGHT C0300 .3 .3
LEFT C0301 .3 .3
GLASS, REAR DOOR - R&R

RIGHT C0310 .6 .6
ADD:
LEFT C0311 .6 .6
ADD:

CAB STYLE
VIN CODE
NUMBER
TF* UC*
GLASS, REAR DOOR - REPLACE

RIGHT C0314 .6 .6
ADD:
LEFT C0315 .6 .6
ADD:
WAIST SEAL, REAR DOOR WINDOW INNER - R&R OR REPLACE

RIGHT C0320 .2 .2
LEFT C0321 .2 .2
WAIST SEAL, REAR DOOR WINDOW OUTER - R&R OR REPLACE

RIGHT C0330 .2 .2
LEFT C0331 .2 .2
CHANNEL, REAR DOOR WINDOW RUN - R&R OR REPLACE

RIGHT C0340 .5 .5
ADD:
LEFT C0341 .5 .5
ADD:
HANDLE, REAR DOOR WINDOW REGULATOR - REPLACE

RIGHT C0370 .2 -
LEFT C0371 .2 -
REGULATOR, REAR DOOR WINDOW (MANUAL) - R&R OR REPLACE

RIGHT C0380 .7 -
LEFT C0381 .7 -

CAB STYLE
VIN CODE
NUMBER
TF* UC*
REGULATOR, REAR DOOR WINDOW (POWER) - R&R OR REPLACE

RIGHT C0382 .4 .4
ADD:
LEFT C0383 .4 .4
ADD:
GLASS, REAR DOOR STATIONARY - REPLACE

RIGHT C0430 .7 .7
LEFT C0431 .7 .7
CHANNEL, QUARTER STATIONARY GLASS (RUBBER) - REPLACE

RIGHT C0494 .7 .7
LEFT C0495 .7 .7
GLASS, QUARTER STATIONARY - RESEAL

RIGHT C0500 .7 .7
LEFT C0501 .7 .7
GLASS, QUARTER STATIONARY - R&R OR REPLACE

RIGHT C0510 .7 .7
LEFT C0511 .7 .7
GLASS, QUARTER SWING OUT - REPLACE

INC: Transfer nec parts.
RIGHT C0530 .7 -
LEFT C0531 .7 -
HINGE, QUARTER GLASS SWING OUT - REPLACE

RIGHT UPPER C0540 .7 -
LEFT UPPER C0541 .7 -
RIGHT LOWER C0544 .7 -
LEFT LOWER C0545 .7 -
ADD:
A - To Replace Both............................................................................................................ .1 -

CAB STYLE
VIN CODE
NUMBER
TF* UC*
LATCH, QUARTER GLASS SWING OUT - REPLACE

RIGHT C0550 .8 -
LEFT C0551 .8 -
GLASS, BACK WINDOW - RESEAL C0650 .5 .5

INC: Water test.
GLASS, BACK WINDOW - REPLACE C0660 .4 .8

INC: R&R rubber channel where nec, water test and extra man's
assistance.
ADD:
A - For Wagon Model.......................................................................................................... .4 -
WEATHER STRIPS AND FINISHER

CAB STYLE
VIN CODE
NUMBER
TF* UC*
WEATHER STRIP, FRONT DOOR - ALIGN OR REPLACE

RIGHT C1060 .3 .3
LEFT C1061 .3 .3
WEATHER STRIP, REAR DOOR - ALIGN OR REPLACE

RIGHT C1120 .2 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 -
LEFT C1121 .2 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 -
WEATHER STRIP, QUARTER WINDOW (SWING OUT) - ALIGN OR REPLACE

RIGHT C1240 .7 -
LEFT C1241 .7 -
WEATHER STRIP, BACK DOOR (BODY SIDE OPENING SURROUND) C1345 .2 .2

- ALIGN OR REPLACE
FINISHER, FRONT DOOR - ALIGN OR REPLACE

RIGHT C1603 .3 .3
LEFT C1604 .3 .3
FINISHER, REAR DOOR - ALIGN OR REPLACE

RIGHT C1610 .2 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 -
LEFT C1611 .2 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 -
INTERIOR TRIM
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SUNSHADE AND/OR SUPPORT - R&R OR REPLACE

RIGHT C2020 .2 .2
LEFT C2021 .2 .2
LOCK, GLOVE COMPARTMENT INSTRUMENT PANEL - REPLACE C2100 .2 .2

ADD:
A - To Code Cyl................................................................................................................... .3 .3
HINGE AND/OR STRIKER, GLOVE COMPARTMENT INSTRUMENT C2120 .2 .2

PANEL - ADJUST OR REPLACE
BOX, GLOVE COMPARTMENT INSTRUMENT PANEL - REPLACE C2160 .2 .2

INC: D&C door assy.
ASH TRAY, INSTRUMENT PANEL - R&R OR REPLACE C2200 .2 .2
ASH TRAY, DOOR TRIM PAD - R&R OR REPLACE

REAR RIGHT C2250 .2 .2
REAR LEFT C2251 .2 .2
TRIM COVER, INSTRUMENT, LOWER (DRIVER) - REPLACE C2350 .2 .2
KNEE BOLSTER - REPLACE

DRIVER C2361 .2 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 -
PASSENGER C2362 .2 .2
CLUSTER, CENTER, INSTRUMENT PANEL - R&R OR REPLACE C2470 .4 .4
PAD, INSTRUMENT PANEL COVER - REPLACE C2475 2.8 2.8

INC: R&R Insturment Panel Assy, and Transfer Ducts, Harnesses,
Reinforcement, SRS Infrator and Other Parts as nec.
INTERIOR TRIM
CAB STYLE
VIN CODE
NUMBER
TF* UC*
PAD, INSTRUMENT PANEL COVER - REPAIR C2480 .5 .5

INSTRUMENT PANEL ASSEMBLY - R&R C2500 1.9 1.9
DOOR AND/OR PAD, CONSOLE COMPARTMENT - R&R OR REPLACE C2740 .2 .2
CONSOLE ASSEMBLY - R&R OR REPLACE

FRONT C2860 .2 .2
REAR C2861 .2 .2
HEADLINING ASSEMBLY - REPAIR

ONE PIECE C3098 .5 .5
HEADLINING ASSEMBLY - R&R

ONE PIECE C3108 1.0 1.5
ADD:
A - To Replace Headlining. for Double Cab......................................................................... .5 -
B - To Replace Headlining. for Space Cab.......................................................................... .2 -
C - For Wagon Model.......................................................................................................... .5 -
TRIM ASSEMBLY, A-PILLAR - R&R OR REPLACE

RIGHT C3220 .2 .2
LEFT C3221 .2 .2
TRIM ASSEMBLY, FRONT DOOR - R&R OR REPLACE

RIGHT; ONE PIECE C3348 .2 .2
LEFT; ONE PIECE C3358 .2 .2
ADD:
A - For Window Manual Type.............................................................................................. .1 -
PLATE AND/OR INSERT, FRONT DOOR SILL - REPLACE

RIGHT C3360 .2 .2
LEFT C3361 .2 .2
INTERIOR TRIM
CAB STYLE
VIN CODE
NUMBER
TF* UC*
TRIM COVER, KICKING PLATE - REPLACE

RIGHT C3380 .2 .2
LEFT C3381 .2 .2
GARNISH, DOOR MIRROR, FRONT - REPLACE

RIGHT C3400 .2 .2
LEFT C3401 .2 .2
SHEET, WATERPROOF, FRONT DOOR - REPLACE

RIGHT C3420 .3 .3
LEFT C3421 .3 .3
SHEET, WATERPROOF, REAR DOOR - REPLACE

RIGHT C3450 .3 .3
LEFT C3451 .3 .3
TRIM ASSEMBLY, REAR DOOR - R&R OR REPLACE

RIGHT C3540 .2 .2
LEFT C3541 .2 .2
PLATE AND/OR INSERT, REAR DOOR SILL - REPLACE

RIGHT C3560 .2 .2
LEFT C3561 .2 .2
TRIM ASSEMBLY, BC-PILLAR - R&R OR REPLACE

UPPER RIGHT C4020 .3 .3
UPPER LEFT C4021 .3 .3
LOWER RIGHT C4025 .2 .2
LOWER LEFT C4026 .2 .2
TRIM ASSEMBLY, QUARTER UPPER - R&R OR REPLACE

RIGHT C4030 .4 .5
LEFT C4031 .4 .5
ADD:
A - For Single Cab............................................................................................................... .2 -
B - With Center Jack Cover................................................................................................. .1 -
(CONTINUED)
INTERIOR TRIM
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CON'D)
C - To Replace Trim Assy. for Space Cab........................................................................... .2 -
D - For Wagon Model.......................................................................................................... .1 -
TRIM ASSEMBLY, QUARTER LOWER - R&R OR REPLACE

RIGHT C4035 .4 .4
LEFT C4036 .4 .4
ADD:
A - For Single Cab............................................................................................................... .1 -
B - With Center Jack Cover................................................................................................. .1 -
TRIM COVER, CAB BACK - R&R OR REPLACE C4050 .3 -

ADD:
A - For Single Cab............................................................................................................... .1 -
TRIM ASSEMBLY, BACK DOOR (SINGLE DOOR TYPE) - R&R OR REPLACE C4080 .2 .2
CARPET OR VINYL MAT - REPLACE

FRONT C4202 1.0 1.0
ADD:
A - For Pick Up Model.......................................................................................................... 1.0 -
LUGGAGE C4203 1.3 1.3
ASSIST GRIP, FRONT - R&R OR REPLACE

ONE C4300 .2 .2
ASSIST GRIP, REAR - R&R OR REPLACE

ONE OR ALL C4350 .2 .2
COAT HANGER, FRONT AND/OR REAR - R&R OR REPLACE

ONE OR ALL C4400 .2 .2
SEATS AND SEAT TRIM

CAB STYLE
VIN CODE
NUMBER
TF* UC*
COVER ASSEMBLY, JACK STORAGE - REPLACE C4710 .2 -
SLIDE ADJUSTER ASSEMBLY, FRONT SEAT MANUAL - R&R OR REPLACE

BUCKET SEAT, ONE SIDE; PASSENGER C6010 .3 .3
BUCKET SEAT, ONE SIDE; DRIVER C6011 .3 .3
ADD:
A - To Replace Both Sides Same Seat................................................................................ .1 .1
RECLINING ADJUSTER ASSEMBLY, FRONT SEAT MANUAL - R&R OR REPLACE

BUCKET SEAT ; PASSENGER C6110 .3 .3
BUCKET SEAT ; DRIVER C6111 .3 .3
HEADREST, FRONT SEAT - R&R OR REPLACE

PASSENGER C6690 .2 .2
DRIVER C6691 .2 .2
SEAT ASSEMBLY, FRONT - REPLACE

BUCKET SEAT; PASSENGER C6820 .2 .2
BUCKET SEAT; DRIVER C6821 .2 .2
BENCH SEAT ASSEMBLY, FRONT - REPLACE C6830 .3 -
COVER AND/OR PAD, FRONT SEAT, CUSHION - R&R OR REPLACE

BUCKET SEAT; PASSENGER C6870 1.0 1.0
BUCKET SEAT; DRIVER C6871 1.1 1.1
COVER AND/OR PAD, FRONT SEAT, BACK - R&R OR REPLACE

BUCKET SEAT; PASSENGER C7050 .7 .7
BUCKET SEAT; DRIVER C7051 .7 .7
HEADREST, REAR SEAT - R&R OR REPLACE

RIGHT C7230 .2 .2
LEFT C7231 .2 .2
SEATS AND SEAT TRIM

CAB STYLE
VIN CODE
NUMBER
TF* UC*
COVER AND/OR PAD, REAR SEAT, CUSHION - R&R OR REPLACE

C7250 1.0 1.0
ADD:
CUSHION; 1 PIECE TYPE C7253 .2 -
COVER AND/OR PAD, REAR SEAT, BACK - R&R OR REPLACE C7260 .6 1.0
INC: Replace frame as nec.
ADD:
A - For Double Cab.............................................................................................................. .5 -
B - For Wagon Model.......................................................................................................... .4 -
COVER AND/OR PAD, REAR SEAT, BACK - R&R OR REPLACE

INC: Replace frame as nec.
BACK; 1 PIECE TYPE C7278 .6 -
ADD:
A - For Double Cab.............................................................................................................. .5 -
SEAT ASSEMBLY, REAR BENCH - R&R OR REPLACE C7700 .3 -
SEAT ASSEMBLY, REAR BENCH - R&R OR REPLACE

CUSHION 1 PIECE/BACK 1 OR 2 PIECE TYPE C7809 .3 -
SLIDE ADJUSTER ASSEMBLY, REAR SEAT - REPLACE

RIGHT C7910 .4 .4
LEFT C7911 .4 .4
CONTROL CABLE, REAR SEAT DEVICE - REPLACE C7920 .4 .4

ADD:
A - Additional each control cable......................................................................................... .3 .3
RECLINING ADJUSTER ASSEMBLY, REAR SEAT - REPLACE

RIGHT C7950 1.1 1.1
LEFT C7951 1.1 1.1
COVER AND/OR PAD, 3RD SEAT, CUSHION - REPLACE (BENCH TYPE) C8350 .6 .6
SEATS AND SEAT TRIM

CAB STYLE
VIN CODE
NUMBER
TF* UC*
COVER AND/OR PAD, 3RD SEAT, BACK - REPLACE (BENCH TYPE) C8351 .6 .6
HINGE, 3RD SEAT - REPLACE (BENCH TYPE) C8355 .8 .8
SEAT BELT, FRONT BUCKLE SIDE - REPLACE

RIGHT C9020 .2 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 -
LEFT C9021 .2 .3
ADD:
A - For Wagon Model.......................................................................................................... .1 -
CENTER C9022 .2 -
ADD:
A - For Bucket Seat Type.................................................................................................... .1 -
SEAT BELT, FRONT RETRACTOR SIDE - R&R OR REPLACE

RIGHT C9040 .4 .4
ADD:
A - For Single Cab or Space Cab........................................................................................ .2 -
LEFT C9041 .4 .4
ADD:
BOTH C9047 .6 .6
ADD:
GUIDE AND/OR COVER, SEAT BELT - R&R OR REPLACE

RIGHT C9050 .2 .4
ADD:
A - For Wagon Model.......................................................................................................... .2 -
LEFT C9051 .2 .4
ADD:
A - For Wagon Model.......................................................................................................... .2 -
SEAT BELT, FRONT CENTER - REPLACE C9100 .2 -

SEATS AND SEAT TRIM

CAB STYLE
VIN CODE
NUMBER
TF* UC*
SEAT BELT, REAR (BUCKLE SIDE) - REPLACE

RIGHT C9190 .3 .3
LEFT C9191 .3 .3
CENTER C9192 .2 .2
ADD:
A - For Pick Up Model (C9192 Only)................................................................................... .1 -
SEAT BELT, REAR (TONGUE SIDE) - REPLACE C9193 .2 .2
SEAT BELT, REAR (RETRACTOR SIDE) - REPLACE

RIGHT C9200 .5 .7
ADD:
A - For Single Cab............................................................................................................... .1 -
B - For Wagon Model.......................................................................................................... .2 -
LEFT C9201 .5 .7
ADD:
A - For Single Cab............................................................................................................... .1 -
B - For Wagon Model.......................................................................................................... .2 -
CENTER C9202 .3 -
SEAT BELT, 3RD (BUCKLE SIDE) - REPLACE

RIGHT C9230 .2 .2
LEFT C9231 .2 .2
SEAT BELT, 3RD (TONGUE SIDE) - REPLACE C9235 .2 .2
BOLTS, FASTENERS AND FITTINGS - TIGHTEN C9990 .2 .2

NOTE: This operation is to be used on body items only. For Chassis
items refer to operation number E1990 of the Frame section.
D HEATING AND AIR CONDITIONING
D
HEATING AND AIR CONDITIONING D – 1
D – 2 HEATING AND AIR CONDITIONING
HEATING AND AIR CONDITIONING D – 3
D - 4 HEATING AND AIR CONDITIONING
HEATING AND AIR CONDITIONING

CAB STYLE
VIN CODE
NUMBER
TF* UC*
FOR THOSE OPERATIONS IN THIS SECTION WHICH HAVE AN "ADD"

FOR DISCHARGE/CHARGE OF THE A/C SYSTEM, THIS "ADD" CAN
ONLY BE USED ONCE PER REPAIR ORDER.
CONTROL ASSEMBLY - REPLACE

HEATER ONLY D0360 .7 .7
WITH A/C D0362 .5 .5
ADD:
A - For Pick Up Model (D0362 Only)................................................................................... .2 -
CABLES, AIR DISTRIBUTION - R&R OR REPLACE

INC: Fabricate new cable and adjust.
HEATER (NON A/C) AIR INLET D0436 .7 -
HEATER (NON A/C) TEMPERATURE D0437 .7 -
HEATER DEFROSTER D0438 .7 .7
AIR CONDITIONING TEMPERATURE D0447 .7 .7
AIR SOURCE SELECT D0448 .5 .5
RESISTOR, BLOWER MOTOR - REPLACE

HEATER ONLY D1000 .2 .2
WITH A/C D1002 .2 .2
RELAY, A/C - REPLACE

A/C D1027 .2 .2
SWITCH, COMPRESSOR CUT-OFF - REPLACE

DUAL PRESSURE D1116 .2 .2
ADD:
A - Discharge/Charge A/C System...................................................................................... .5 .5
HEATING AND AIR CONDITIONING D - 5

CAB STYLE
VIN CODE
NUMBER
TF* UC*
SWITCH, THERMOSTATIC CONTROL - REPLACE D1140 .4 .4

ADD:
MOTOR AND/OR FAN - R&R OR REPLACE

BLOWER (HEATER ONLY) D1320 .2 .2
BLOWER (WITH A/C) D1322 .2 .2
A/C CONDENSER D1323 .6 .6
NOZZLE ASSEMBLY, DEFROSTER - REPLACE

RIGHT D1420 1.9 1.9
LEFT D1421 1.9 1.9
CENTER D1426 2.0 2.0
DEFLECTOR (GRILLE), AIR - REPLACE

RIGHT D1440 .2 .2
LEFT D1441 .2 .2
RIGHT CENTER D1442 .3 .3
LEFT CENTER D1443 .3 .3
DUCT ASSEMBLY, VENTILATION - REPLACE

RIGHT D1520 2.1 2.1
LEFT D1521 2.1 2.1
CENTER D1526 2.1 2.1
REAR D1528 .7 .7
CASE, HEATER - REPLACE

INC: R&R Instrument Panel Assy and Cross Beam.
HEATER ONLY D2220 1.9 -
WITH A/C D2222 2.0 2.0
ADD:

CAB STYLE
VIN CODE
NUMBER
TF* UC*
CASE, EVAPORATOR - R&R OR REPLACE D2510 .3 .3

ADD:
HOSES, HEATER (WITHOUT AIR CONDITIONING) - REPLACE

ONE D2746 .5 -
BOTH D2747 .6 -
HOSES, HEATER (WITH AIR CONDITIONING) - REPLACE

ALL HOSES D2787 .6 -
CORE, HEATER - R&R

WITH A/C D2802 2.0 -
ADD:
A - Discharge/Charge A/C System...................................................................................... .5 -
CORE, HEATER - REPLACE

WITH A/C D2822 2.0 -
ADD:
A - Discharge/Charge A/C System...................................................................................... .5 -
A/C SYSTEM - LEAK TEST DISCHARGED SYSTEM D3000 .3 .3

NOTE: This labor operation to be used when necessary to partially
charge 1 lb. max. the A/C system to locate a leak. Other Labor Hours
not allowed with this labor operation. This operation may only be
claimed in conjunction with a failed part operation.

CAB STYLE
VIN CODE
NUMBER
TF* UC*
SEALS, REFRIGERANT O-RING - REPLACE

COMPRESSOR MANIFOLD D3040 .3 .3
CONDENSER D3041 .2 .2
CONDENSER OUTLET PIPE D3042 .2 .2
EXPANSION VALVE D3043 .3 .3
EVAPORATOR D3044 .3 .3
FILTER DRYER D3048 .2 .2
ADD:
HOSES AND/OR LINES, REFRIGERANT - REPLACE

INC: Assemble service hose as nec.
COMPRESSOR DISCHARGE D3082 .3 .3
COMPRESSOR SUCTION D3089 .3 .3
FILTER DRYER OUTLET D3097 .3 .3
ADD:
CONDENSER - REPLACE D3140 .7 .7

ADD:
B - Witch Intercooler............................................................................................................ .9 .9
C - Witch Condenser Fan Moter.......................................................................................... .1 .1
D - For Wagon Model.......................................................................................................... 1.0 1.0
VALVE, EXPANSION - REPLACE D3220 .3 .3

ADD:
DRYER, IN-LINE FILTER - REPLACE D3250 .3 .3

ADD:
CORE, EVAPORATOR - REPLACE D3320 .4 .4

ADD:

CAB STYLE
VIN CODE
NUMBER
TF* UC*
PULLEY IDLER, A/C - R&R D4020 .3 .3
BRACKET (S) , COMPRESSOR MOUNTING - R&R OR REPLACE

ALL D4237 .5 .5
CLUTCH PLATE AND HUB ASSEMBLY, COMPRESSOR - REPLACE D4240 .6 .6

INC. R&R Compressor assembly.
ADD:
B - 6V*1 Engine................................................................................................................... .8 .8
C - C24*E Engine................................................................................................................ .1 .1
COMPRESSOR ASSEMBLY - REPLACE D4440 .4 .4

ADD:
B - 6V*1 Engine................................................................................................................... .8 .8
C - C24*E Engine................................................................................................................ .1 .1
DRAIN HOSE, REAR COOLER - REPLACE D5000 .4 .4
DUCTS, AIR VENTILATION, REAR COOLER - REPLACE D5010 1.6 1.6
CORE, EVAPORATOR, REAR COOLER - REPLACE D5020 1.8 1.8
VALVE, EXPANSION, REAR COOLER - REPLACE D5030 1.6 1.6
GRILLES, AIR DUCT, REAR COOLER (ONE OR ALL) - REPLACE D5050 1.5 1.5
KNOB, BLOWER SWITCH, REAR COOLER - REPLACE D5060 .2 .2
BLOWER MOTOR ASSEMBLY, REAR COOLER - REPLACE D5070 1.5 1.5


CAB STYLE
VIN CODE
NUMBER
TF* UC*
PIPE (1), HIGH OR LOW PRESSURE LINE, REAR COOLER - REPLACE D5080 1.2 1.2
ADD:
A - Each Additional.............................................................................................................. .2 .2
RESISTER, REAR COOLER - REPLACE D5090 .4 .4
REAR COOLER UNIT - R&R D5100 1.5 1.5
SWITCH, BLOWER, REAR COOLER - REPLACE D5110 .2 .2

E WHEELS, SUSPENSION, STEERING
E
STEERING, SUSPENSION, WHEELS AND TIRES E – 1
E – 2 STEERING, SUSPENSION, WHEELS AND TIRES
E - 8 STEERING, SUSPENSION, WHEELS AND TIRES
WHEELS AND TIRES

CAB STYLE
VIN CODE
NUMBER
TF* UC*
COVER, WHEEL - REPLACE

FRONT E0022 .2 .2
REAR E0023 .2 .2
ALL E0027 .3 .3
WHEEL - BALANCE
INC: R&R wheel and tire.
ONE E0200 .4 .4
TWO E0201 .6 .6
THREE E0202 .8 .8
FOUR E0203 1.0 1.0
WHEEL OR TIRE - REPLACE

NOTE: Include separate tire from wheel, and wheel balance (static).
ONE E0411 .5 .5
TWO E0412 .7 .7
THREE E0413 .9 .9
FOUR E0414 1.1 1.1
WHEEL W/TIRE - R&R OR REPLACE

INC: R&R wheel to hub.
NOTE: Does not include wheel balance (static).
ONE E0420 .3 .3
TWO E0421 .3 .3
THREE E0422 .4 .4
FOUR E0423 .4 .4
STUD, WHEEL MOUNTING - REPLACE

INC: R&R wheel and hub as an assy.
RIGHT FRONT E0474 .5 .5
LEFT FRONT E0475 .5 .5
ADD:
A - To Replace Additional Two Studs.................................................................................. .2 .2
B - To Replace Additional Four Studs................................................................................. .4 .4
C - To Replace All Studs..................................................................................................... .6 .6
D - With ABS....................................................................................................................... .2 .2
(CONTINUED)
STEERING, SUSPENSION, WHEELS AND TIRES E - 9
WHEELS AND TIRES

CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
E - For 4x4 Model................................................................................................................ .1 .1
RIGHT REAR E0484 1.3 1.3
LEFT REAR E0485 1.3 1.3
ADD:
A - To Replace Additional Two Studs.................................................................................. .2 .2
B - To Replace Additional Four Studs................................................................................. .4 .4
C - To Replace All Studs..................................................................................................... .6 .6
HANGER ASSY(HOLD DOWN), SPARE TIRE - R&R OR REPLACE E0600 .2 .2
JACK AND/OR HANDLE - REPLACE E0620 .2 .2

FRAME
CAB STYLE
VIN CODE
NUMBER
TF* UC*
CUSHION, PAD AND/OR BOLT, BODY - R&R OR REPLACE

MOUNT POSITION ONE E1106 .5 .5
ADD:
A - To Replace Additional Two Cushions............................................................................ .1 .1
B - To Replace Additional Four Cushions............................................................................ .2 .2
C - Replace All Cushions..................................................................................................... .3 .3
CROSSMEMBER, FRAME - REPAIR E1760 .5 .5

CROSSMEMBER, FRAME - REPLACE E1770 .5 .5

FRAME ASSEMBLY - REPAIR E1860 .5 .5

BOLTS, FASTENERS AND FITTINGS - TIGHTEN E1990 .2 .2

NOTE: This operation is to be used on chassis items only. For body
items refer to operation C9990 of the seats section.
FRONT SUSPENSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
TOE-IN, FRONT SUSPENSION - ADJUST E2000 .4 .4
FRONT SUSPENSION - CHECK AND/OR ALIGN E2020 .9 .9

INC: Adjust camber, caster, toe-in and trim height where applicable.
LINK AND/OR LINK BUSHINGS OR BUSHING AND/OR BRACKET,

FRONT STABILIZER SHAFT AT CONTROL ARM - R&R OR REPLACE
POLICY: P
(Except Bushing)
NOTE: Maximum time not to exceed operation number E2147.
RIGHT E2140 .3 .3
LEFT E2141 .3 .3
BOTH E2147 .4 .4
SHAFT, FRONT STABILIZER - REPLACE E2160 .6 .6

POLICY: P
INC: R&R links and bushings
INSULATOR AND/OR BRACKET, FRONT STABILIZER SHAFT AT FRAME - REPLACE E2180 .4 .4
NUT, FRONT WHEEL HUB - REPLACE E2200 .4 .4

ADD:
A - To Replace Both............................................................................................................ .3 .3
BEARING, FRONT WHEEL - ADJUST

RIGHT E2220 .4 .4
LEFT E2221 .4 .4
BOTH E2227 .6 .6
CAP, FRONT WHEEL HUB DUST - REPLACE

RIGHT E2230 .2 .2
LEFT E2231 .2 .2
BOTH E2237 .2 .2
FRONT SUSPENSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BEARING, FRONT WHEEL - REPLACE

POLICY: T, P
INC: R&R wheel, clean and pack inner and outer bearings, replace seal, fill oiler cap.
NOTE: Maximum time not to exceed operation number E2267 & E2268.
INNER RIGHT (4 x 2) E2240 .7 .7
INNER LEFT (4 x 2) E2241 .7 .7
INNER RIGHT (4 x 4) E2242 .9 .9
INNER LEFT (4 x 4) E2243 .9 .9
INNER BOTH (4 x 2) E2247 1.0 1.0
INNER BOTH (4 x 4) E2248 1.4 1.4
OUTER RIGHT (4 x 2) E2250 .7 .7
OUTER LEFT (4 x 2) E2251 .7 .7
OUTER RIGHT (4 x 4) E2252 .9 .9
OUTER LEFT (4 x 4) E2253 .9 .9
OUTER BOTH (4 x2) E2257 1.0 1.0
OUTER BOTH (4 x 4) E2258 1.4 1.4
INNER AND OUTER RIGHT (4 x 2) E2260 .7 .7
INNER AND OUTER LEFT (4 x 2) E2261 .7 .7
INNER AND OUTER RIGHT (4 x 4) E2262 .9 .9
INNER AND OUTER LEFT (4 x 4) E2263 .9 .9
INNER AND OUTER BOTH (4 x 2) E2267 1.1 1.1
INNER AND OUTER BOTH (4 x 4) E2268 1.5 1.5
SEAL, FRONT WHEEL BEARING - REPLACE

POLICY: P
INC: Clean, inspect and repack inner and outer bearings. Replace bearings if nec.
RIGHT (4 x 2) E2280 .6 .6
LEFT (4 x 2) E2281 .6 .6
RIGHT (4 x 4) E2282 .8 .8
LEFT (4 x 4) E2283 .8 .8
BOTH (4 x 2) E2287 1.0 1.0
BOTH (4 x 4) E2291 1.3 1.3
FRONT SUSPENSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
HUB ASSEMBLY, FRONT WHEEL - REPLACE

INC: R&R wheel, clean and pack inner and outer bearings, replace seal, fill oiler cap.
RIGHT E2320 .9 1.0
ADD:
A - For 4x4 Model................................................................................................................ .1 .1
B - With ABS........................................................................................................................ .2 .2
C - For Wagon Model.......................................................................................................... .1 -
LEFT E2321 .9 1.0
ADD:
A - For 4x4 Model................................................................................................................ .1 .1
B - With ABS........................................................................................................................ .2 .2
C - For Wagon Model.......................................................................................................... .1 -
BOTH E2327 1.7 1.8
ADD:
A - For 4x4 Model................................................................................................................ .1 .1
B - With ABS........................................................................................................................ .2 .2
C - For Wagon Model.......................................................................................................... .1 -
AUTO LOCKING HUB - REPLACE

RIGHT E2360 .5 -
LEFT E2361 .5 -
BOTH E2367 .8 -
ADD:
A - To Replace Manual Locking Hub................................................................................... .3 -
KNUCKLE ASSEMBLY, STEERING - REPLACE

POLICY: T
INC: R&R wheel, hub and steering knuckle.
Adjust and lubricate front wheel bearings and set toe-in.
RIGHT (4 x 2) E2520 1.2 1.2
LEFT (4 x 2) E2521 1.2 1.2
RIGHT (4 x 4) E2522 1.4 1.4
LEFT (4 x 4) E2523 1.4 1.4
BOTH (4 x 2) E2527 2.0 2.0
BOTH (4 x 4) E2528 2.3 2.3
FRONT SUSPENSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BEARING, KNUCKLE - REPLACE

RIGHT E2530 1.7 1.7
LEFT E2531 1.7 1.7
BOTH E2535 2.8 2.8
SEAL, KNUCKLE OIL - REPLACE

RIGHT E2551 1.5 1.5
LEFT E2552 1.5 1.5
BOTH E2557 2.3 2.3
DUMPER, CONTROL ARM - REPLACE

NOTE: Maximum time not to exceed operation number E2837
LOWER RIGHT E2830 .2 .2
LOWER LEFT E2831 .2 .2
LOWER BOTH E2837 .3 .3
BALL JOINT, CONTROL ARM - REPLACE

POLICY: T
UPPER RIGHT E2920 1.3 1.3
UPPER LEFT E2921 1.3 1.3
UPPER BOTH E2927 2.4 2.4
LOWER RIGHT E2930 1.2 1.2
LOWER LEFT E2931 1.2 1.2
LOWER BOTH E2937 2.2 2.2
SPRING, FRONT COIL - REPLACE

POLICY: A, T
RIGHT E3020 .8 -
LEFT E3021 .8 -
BOTH E3027 1.4 -
BAR, FRONT TORSION - ADJUST E3300 .3 .3

NOTE: Use operation E2020 instead of this one, if front end alignment is nec.
FRONT SUSPENSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BAR, FRONT TORSION - REPLACE

INC: Adjust trim height.
RIGHT E3320 .7 .7
LEFT E3321 .7 .7
BOTH E3327 1.1 1.1
ADD:
A - With Skid Plate............................................................................................................... .2 .2
ARM, TORSION BAR PIVOT - REPLACE

INC: Adjust trim height.
RIGHT E3330 .7 .7
LEFT E3331 .7 .7
BOTH E3337 1.1 1.1
ADD:
A - With Skid Plate............................................................................................................... .2 .2
ARM ASSEMBLY, FRONT CONTROL - REPLACE

BUSHINGS AND/OR SHAFT, FRONT CONTROL ARM - REPLACE

POLICY: T
FRONT SUSPENSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SHOCK ABSORBER, FRONT - REPLACE

RIGHT E3800 .3 .3
ADD:
A - For 4x2 Model (EXC. HIGH RIDE SUS.)........................................................................ .5 -
LEFT E3801 .3 .3
ADD:
BOTH E3807 .5 .5
ADD:
COVER, FRONT SHOCK ABSORBER - REPLACE

RIGHT E3830 .8 -
LEFT E3831 .8 -
BOTH E3837 1.4 -
REAR SUSPENSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BAR, REAR STABILIZER - REPLACE E4160 .5 -
INSULATOR AND/OR SUPPORT, REAR STABILIZER BAR - REPLACE

RIGHT E4180 .2 -
LEFT E4181 .2 -
BOTH E4187 .3 -
DUMPER, AXLE - REPLACE

RIGHT E4400 .3 .3
LEFT E4401 .3 .3
BOTH E4407 .4 .4
BOLT, REAR LEAF SPRING CENTER - REPLACE

POLICY: T
INC: D&C spring to axle and align spring leaves.
DOES NOT INC: Rebushing.
RIGHT E5100 .8 .8
LEFT E5101 .8 .8
BOTH E5107 1.5 1.5
SPRING ASSEMBLY, REAR LEAF - REPLACE

POLICY: A, T
INC: D&C spring at both hangers and axle.
RIGHT E5130 .7 .7
LEFT E5131 .7 .7
BOTH E5137 1.3 1.3
LEAVES, REAR SPRING - REPLACE

INC: Remove, disassemble, clean, replace leaves as nec.
RIGHT E5140 .9 .9
LEFT E5141 .9 .9
BOTH E5147 1.7 1.7
REAR SUSPENSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BUSHING, REAR LEAF SPRING EYE - REPLACE

RIGHT E5180 .8 .8
LEFT E5181 .8 .8
BOTH E5185 1.5 1.5
SHACKLE AND/OR BUSHING, REAR LEAF SPRING - REPLACE

POLICY: T
RIGHT E5200 .4 .4
LEFT E5201 .4 .4
BOTH E5207 .6 .6
U-BOLT OR RETAINING BOLT, REAR LEAF SPRING - REPLACE

POLICY: T
INC: Both U-Bolts or Retaining Bolts.
RIGHT E5220 .4 .4
LEFT E5221 .4 .4
BOTH E5227 .5 .5
BOLT, REAR LEAF SPRING EYE OR LINK - REPLACE

POLICY: T
RIGHT E5240 .3 .3
LEFT E5241 .3 .3
BOTH E5247 .4 .4
BRACKET, REAR SHOCK ABSORBER AND LEAF SPRING MOUNTING - REPLACE

RIGHT E5260 .5 .5
LEFT E5261 .5 .5
BOTH E5267 .7 .7
SHOCK ABSORBER, REAR - REPLACE

RIGHT E5800 .2 .2
LEFT E5801 .2 .2
BOTH E5807 .3 .3
STEERING
CAB STYLE
VIN CODE
NUMBER
TF* UC*
WHEEL, STEERING - ALIGN E7000 .2 .2

ADD:
A - With SRS....................................................................................................................... .2 .2
EMBLEM AND/OR PAD, HORN BUTTON - REPLACE E7010 .2 .2

INC: Transfer parts.
WHEEL, STEERING - REPLACE E7020 .2 .2
HORN CONTACT - REPLACE E7100 .2 .2
CYLINDER, IGNITION LOCK - R&R OR REPLACE E7200 .6 .6

POLICY: T
COVER, LOCK HOUSING - REPLACE E7220 .2 .2

ADD:
A - With SRS....................................................................................................................... .1 .1
COLUMN ASSEMBLY, STEERING - R&R E7660 .9 .9
UNIVERSAL JOINT, STEERING SHAFT - R&R OR REPLACE

UPPER E7782 1.0 1.0
LOWER E7783 1.0 1.0
TIE ROD, INNER - REPLACE

POLICY: T
INC: Check and adjust toe-in R&R rack and pinion gear assy. as nec.
RIGHT E8040 1.3 1.3
LEFT E8041 1.3 1.3
BOTH E8047 1.5 1.5
STEERING
CAB STYLE
VIN CODE
NUMBER
TF* UC*
TIE ROD END AND/OR ADJUST SLEEVE - REPLACE

POLICY: T
INC: Check and adjust toe-in.
RIGHT E8060 .6 .6
LEFT E8061 .6 .6
BOTH E8067 1.1 1.1
CAP, POWER STEERING PUMP RESERVOIR - REPLACE E8300 .2 .2
PULLEY, POWER STEERING PUMP - REPLACE E8360 .5 .5

POLICY: T
SEAL, POWER STEERING PUMP SHAFT, OIL - REPLACE E8380 .8 .8

POLICY: T
VALVE, POWER STEERING PUMP FLOW CONTROL - REPLACE E8440 .8 .8

POLICY: T
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
HOSES, POWER STEERING HYDRAULIC - REPLACE

POLICY: T
INC: Check and add fluid.
PRESSURE E8622 .5 .5
RETURN E8623 .4 .4
SWITCH, PRESSURE, POWER STEERING - R&R OR REPLACE E8700 .3 -

NOTE: Include flush power steering system.
ADD:
A - 6V*1 Engine................................................................................................................... .2 -
STEERING
CAB STYLE
VIN CODE
NUMBER
TF* UC*
PUMP ASSEMBLY, POWER STEERING - R&R E9040 .5 1.1

POLICY: T
INC: Bleed hydraulic system.
ADD:
A - To Replace Reservoir And/Or Hose............................................................................... .3 .3
B - To Recondition Pump for Pick Up Model....................................................................... .6 -
C - To Recondition Pump for Wagon Model........................................................................ .3 -
D - To Replace Mounting Bracket........................................................................................ .2 .2
E - 6V*1 Engine................................................................................................................... .2 -
F - 4JJ1/4JK1 Engine.......................................................................................................... .6 -
G - To Recondition Pump.................................................................................................... - .3
H - Diagnosis Time.............................................................................................................. .3 .3
PUMP ASSEMBLY, POWER STEERING - REPLACE E9050 .6 1.2

POLICY: T
ADD:
A - 6V*1 Engine................................................................................................................... .2 -
B - 4JJ1/4JK1 Engine.......................................................................................................... .6 -
C - Diagnosis Time.............................................................................................................. .3 .3
RESERVOIR ASSEMBLY, POWER STEERING FLUID REMOTE - REPLACE E9100 .3 .3

POLICY: T
GEAR ASSEMBLY, POWER STEERING - R&R E9720 1.2 1.2

POLICY: T
INC: R&R steering gear assy, drain and refill, bleed hydraulic system.
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
GEAR ASSEMBLY, POWER STEERING - REPLACE E9740 1.2 1.2

POLICY: T
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
STEERING
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BELT, POWER STEERING PUMP DRIVE - REPLACE E9750 .3 .3
DUST COVER, RACK AND PINION - REPLACE

Inc. Adjust Set Toe-in.
ONE E9880 .6 .6
BOTH E9882 .9 .9
F AXLE AND DIFFERENTIAL
F
AXLE AND DIFFERENTIAL F – 1
F – 2 AXLE AND DIFFERENTIAL
AXLE AND DIFFERENTIAL F - 3
AXLE AND DIFFERENTIAL

CAB STYLE
VIN CODE
NUMBER
TF* UC*
BEARING, CENTER SUPPORT - REPLACE F0040 .6 .6

POLICY: T, P
INC: D&C front and intermediate U-joints. R&R center bearing support
to frame. R&R propeller shaft and hanger bearing to shaft.
UNIVERSAL JOINT, PROPELLER SHAFT - REPLACE

FRONT F1002 1.0 1.0
REAR F1003 1.0 1.0
INTERMEDIATE F1004 1.0 1.0
YOKE, PROPELLER SHAFT - REPLACE F1010 .6 1.0

ADD:
A - For Wagon Model.......................................................................................................... .4 -
PROPELLER SHAFT ASSEMBLY - R&R OR REPLACE

POLICY: P, T
ONE PIECE TYPE F1280 .4 -
TWO PIECE TYPE F1281 .4 .4
FRONT DRIVE (4 x 4) F1288 .4 .4
INNER SHAFT, FRONT OUTPUT - REPLACE

LEFT F1300 4.6 4.6
DUST COVER, FRONT DRIVE SHAFT - REPLACE

INC: Adjust Set Toe-in.
RIGHT OUTER F1400 1.9 1.9
RIGHT INNER F1401 1.7 1.7
RIGHT BOTH F1402 1.9 1.9
LEFT OUTER F1403 1.9 1.9
LEFT INNER F1404 1.7 1.7
LEFT BOTH F1405 1.9 1.9
F - 4 AXLE AND DIFFERENTIAL

CAB STYLE
VIN CODE
NUMBER
TF* UC*
SHAFT, FRONT OUTPUT - REPLACE

POLICY: P
RIGHT F1420 4.4 4.4
LEFT F1421 4.5 4.5
BOTH F1427 4.6 4.6
SEALS, FRONT OUTPUT SHAFT - REPLACE

POLICY: P
RIGHT F1440 4.3 4.4
ADD:
A - For Wagon Model.......................................................................................................... .1 -
LEFT F1441 4.4 4.5
ADD:
A - For Wagon Model.......................................................................................................... .1 -
BOTH F1447 4.5 4.6
ADD:
A - For Wagon Model.......................................................................................................... .1 -
INNER SHAFT F1445 4.6 4.6
ACTUATOR ASSEMBLY (ELECTRIC TYPE), SHIFT ON THE FLY - REPLACE F1504 .5 .5
SHAFT, REAR AXLE - REPLACE

POLICY: P, T
RIGHT F1530 1.3 1.3
LEFT F1531 1.3 1.3
BOTH F1537 2.5 2.5
AXLE ASSEMBLY, FRONT DRIVE (COMPLETE) - R&R F1550 4.3 4.3
SEAL, AXLE SHAFT OIL, REAR AXLE - REPLACE

POLICY: P
RIGHT F1610 1.3 1.3
LEFT F1611 1.3 1.3
BOTH F1617 2.5 2.5
AXLE AND DIFFERENTIAL F - 5

CAB STYLE
VIN CODE
NUMBER
TF* UC*
SEAL, AXLE SHAFT OIL, INNER, REAR AXLE - REPLACE

RIGHT F1620 .9 .9
LEFT F1621 .9 .9
BOTH F1627 1.4 1.4
BEARING, AXLE SHAFT, REAR AXLE - REPLACE

POLICY: P, T
RIGHT F1650 1.3 1.3
LEFT F1651 1.3 1.3
BOTH F1657 2.5 2.5
SEAL, PINION SHAFT OIL - REPLACE

POLICY: P
FRONT DIFFERENTIAL F2022 .6 .6
REAR DIFFERENTIAL F2023 .6 .6
FLANGE, PINION SHAFT - REPLACE

POLICY: P
INC: Reset bearing preload. Pinion seal and add lubricant.
FRONT DIFFERENTIAL F2042 .5 .5
REAR DIFFERENTIAL F2043 .5 .5
CARRIER ASSEMBLY, FRONT AXLE - R&R OR REPLACE F2122 5.3 5.3

POLICY: A, P, T
ADD:
A - To Replace Pinion Shaft and/or Side and Pinion Gears................................................ .5 .5
B - To Replace Side Bearings............................................................................................. .4 .4
C - To Replace Pinion Bearings.......................................................................................... .4 .4
D - To Replace Ring Gear and Pinion................................................................................. .7 .7
E - To Replace Case........................................................................................................... .5 .5
F - To Replace Carrier......................................................................................................... .8 .8
G - To Recondition Carrier Complete.................................................................................. 1.4 1.4
F - 6 AXLE AND DIFFERENTIAL

CAB STYLE
VIN CODE
NUMBER
TF* UC*
CARRIER ASSEMBLY, REAR AXLE - R&R OR REPLACE F2123 2.4 2.4

POLICY: A, P, T
ADD:
A - To Replace Pinion Shaft and/or Side and Pinion Gears................................................ .5 .5
B - To Replace Side Bearings............................................................................................. .4 .4
C - To Replace Pinion Bearings.......................................................................................... .4 .4
D - To Replace Ring Gear and Pinion................................................................................. .7 .7
E - To Replace Case........................................................................................................... .5 .5
F - To Replace Carrier......................................................................................................... .8 .8
G - To Recondition Carrier Complete.................................................................................. 1.4 1.4
H - To Replace Disc & Spring (LSD).................................................................................... .5 .5
HOUSING ASSEMBLY, REAR AXLE - REPLACE F3023 3.8 3.8

POLICY: P, T
INC: R&R propeller shaft, transfer all parts, bleed brakes and make all nec adjustments.
HOUSING ASSEMBLY, FRONT AXLE - REPLACE F3060 5.5 5.5
DRAIN OR REFILL PLUG AND/OR GASKET, FRONT OR REAR AXLE - REPLACE

FRONT AXLE F3080 .2 .2
REAR AXLE F3082 .2 .2
VENTILATOR, AXLE - REPLACE F3270 .3 .3

INC: Hose assy.
H BRAKES
H
BRAKES H – 1
H – 2 BRAKES
BRAKES H – 3
H – 4 BRAKES
BRAKES H - 5
BRAKES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
PADS, DISC BRAKE - R&R OR REPLACE

BOTH FRONT H0042 .6 .6
CALIPER ASSEMBLY - R&R

POLICY: T
INC: R&R brake pads from caliper. Clean and inspect caliper and bleed brakes.
FRONT RIGHT H0080 .5 .5
FRONT LEFT H0081 .5 .5
FRONT BOTH H0087 .7 .7
CALIPER ASSEMBLY - REPLACE

POLICY: T
INC: R&R brake pads from caliper. Clean and inspect caliper
and bleed brakes.
DISC ASSEMBLY - R&R OR REPLACE

INC: D&C caliper assy and visually inspect. Check rotor lateral runout and parallelism.
Transfer seals, bearings and races. Clean and repack wheel bearing as nec.
FRONT RIGHT (4 x 2) H0120 .5 .5
FRONT LEFT (4 x 2) H0121 .5 .5
FRONT RIGHT (4 x 4) H0122 .6 .6
FRONT LEFT (4 x 4) H0123 .6 .6
FRONT BOTH (4 x 2) H0127 .8 .8
FRONT BOTH (4 x 4) H0128 1.2 1.2
ADD:
A - To Reface Disc (One).................................................................................................... .4 .4
B - To Reface Disc (Two)..................................................................................................... .7 .7
C - With ABS....................................................................................................................... .2 .2
H - 6 BRAKES
BRAKES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SHIELD, FRONT BRAKE DUST - R&R OR REPLACE

RIGHT H0160 .6 .6
LEFT H0161 .6 .6
BOTH H0167 1.2 1.2
ADD:
A - For 4 x 4 Model.............................................................................................................. .1 .1
DRUM, BRAKE - R&R OR REPLACE

INC: Adjust wheel bearings when nec to remove hub, adjust brake shoes.
DOES NOT INC: Replace hub, bearings or oil seal. Adjust brake shoes on opposite wheels.
REAR RIGHT H0200 .3 .3
REAR LEFT H0201 .3 .3
REAR BOTH H0207 .4 .4
ADD:
A - To Reface Drum (One)................................................................................................... .4 .4
B - To Reface Drum (Two)................................................................................................... .7 .7
SHOES AND LININGS, DRUM BRAKE - R&R OR REPLACE

INC: R&R wheel, hub, drum and brake shoes. Clean shoes and drum.
Clean and lubricate anchor pins and cam. Adjust wheel bearings and brake shoes.
DOES NOT INC: Reline brake shoes.
SPRINGS, BRAKE SHOE RETURN AND/OR HOLD DOWN - REPLACE

SELF ADJUSTER, BRAKE - R&R OR REPLACE

BRAKES H - 7
BRAKES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
CYLINDER, BRAKE WHEEL - R&R OR REPLACE

POLICY: T
INC: Time to recondition, adjust bearings, bleed brakes.
REAR BOTH H0377 1.2 1.2
SHIELD, REAR BRAKE DUST - R&R OR REPLACE

DRUM, RIGHT H0400 1.1 1.3
ADD:
A - For Wagon Model.......................................................................................................... .2 -
DRUM, LEFT H0401 1.1 1.3
ADD:
A - For Wagon Model.......................................................................................................... .2 -
DRUM, BOTH H0407 1.9 2.5
ADD:
A - For Wagon Model.......................................................................................................... .6 -
RESERVOIR, BRAKE MASTER CYLINDER - REPLACE H0615 .5 .5

INC: Air Bleed Brake system.
CYLINDER ASSEMBLY, BRAKE MASTER - R&R H0620 .4 .4

CYLINDER ASSEMBLY, BRAKE MASTER - REPLACE H0640 .4 .4

POLICY: T
BRAKE SYSTEM - BLEED H0700 .4 .4

H - 8 BRAKES
BRAKES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
HOSE, BRAKE - REPLACE

POLICY: T
REAR CENTER H0739 .4 .4
VALVE, LOAD SENSING PROPORTIONING, BRAKE - R&R OR REPLACE H0775 1.3 1.3
VALVE, LOAD SENSING PROPORTIONING, BRAKE - ADJUST H0777 .9 .9
VALVE, BRAKE COMBINATION - REPLACE H0780 .5 .5
SWITCH, LOW BRAKE FLUID WARNING - REPLACE H0785 .5 .5
PIPE, BRAKE - REPLACE

POLICY: T
INC: Air Bleed Brake System.
MASTER CYL TO CONNECTOR H0800 .7 .7
CONNECTOR TO FRONT WHEEL FLEX HOSE; RIGHT H0880 .7 .7
CONNECTOR TO FRONT WHEEL FLEX HOSE; LEFT H0881 .7 .7
AXLE HOUSING JUNCTION TO REAR WHEEL; RIGHT H0910 .5 .5
AXLE HOUSING JUNCTION TO REAR WHEEL; LEFT H0911 .5 .5
VACUUM TANK - REPLACE H0960 .2 .2

ADD:
A - For Two Batteries Specification..................................................................................... .3 -
BOOSTER ASSEMBLY, VACUUM POWER BRAKE - R&R

POLICY: T
INC: Air Bleed Brake System.
MASTER VAC MODEL H1100 .7 .7
ADD:
A - To Recondition Booster.................................................................................................. ST ST
BRAKES H - 9
BRAKES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BOOSTER ASSEMBLY, VACUUM POWER BRAKE - REPLACE H1120 .7 .7

POLICY: T
VALVE, FILTER, HOSE AND/OR PIPE, VACUUM POWER BRAKE - REPLACE H1240 .2 .2
SPEED SENSOR, ABS - R&R

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
RING, EXCITOR, ABS - R&R

ADD:
A - For 4x4 Model................................................................................................................ .1 .1
B - For Pick Up Model.......................................................................................................... .1 -
C - Diagnosis Time.............................................................................................................. .3 .3
ADD:
A - For 4x4 Model................................................................................................................ .1 .1
B - For Pick Up Model.......................................................................................................... .1 -
C - Diagnosis Time.............................................................................................................. .3 .3
REAR RIGHT H2453 1.2 1.2
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
REAR LEFT H2454 1.2 1.2
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
HYDRAULIC UNIT, ABS - R&R H2480 .4 .4

INC: R&R battery, Time to bleed brakes.
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
H - 10 BRAKES
BRAKES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
G-SENSOR, ABS - R&R H2495 .4 .4

INC: R&R center console assy.
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
CONTROL MODULE, ABS ELECTRONIC BRAKE - R&R H2506 .4 .4

ADD:
B - Diagnosis Time.............................................................................................................. .3 .3
PEDAL AND/OR BUSHING, BRAKE - R&R OR REPLACE H2640 1.2 1.2
PAD, BRAKE PEDAL - REPLACE H2660 .2 .2
SPRING, BRAKE PEDAL RETURN - REPLACE H2680 1.2 1.2
PARKING BRAKE - ADJUST H2800 .3 .3
LEVER AND/OR SUPPORT, PARKING BRAKE ASSEMBLY - R&R OR REPLACE H2860 .3 .3

ADD:
A - For Stick (T-Handle) Type.............................................................................................. 1.7 -
CABLE, PARKING BRAKE - REPLACE

FRONT SECTION H2885 .5 .5
REAR SECTION (1 PIECE) H2886 .8 .8
REAR SECTION (2 PIECE) H2887 1.3 1.3
J ENGINE
J
J - 30 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
MANIFOLD AND/OR GASKET, EXHAUST - REPLACE

POLICY: P, E
NOTE: For HFV6 Engine.
RIGHT BANK J0100 1.5 -
LEFT BANK J0102 1.6 -
MANIFOLD AND/OR GASKET, EXHAUST - REPLACE

POLICY: P, E
NOTE: EXC. HFV6 Engine.
4J J0103 .5 2.2
6V J0107 1.1 -
C24*E J0111 .6 -
ADD:
A - 6V*1 Engine, Left........................................................................................................... .8 -
B - 6V*1 Engine for 4 x 4 Model, Right................................................................................ .5 -
C - 4JH1-T or TC Engine..................................................................................................... .2 -
D - 4J** Engine without EGR Cooler.................................................................................... 1.3 -
E - 4J** Engine with EGR Cooler......................................................................................... 1.7 -
F - 4JJ* Engine.................................................................................................................... 2.2 .5
MANIFOLD AND/OR GASKET, INTAKE - REPLACE

POLICY: P
4J J0203 1.8 1.8
C24*E J0210 1.6 -
ADD:
A - 4JH1-T Engine............................................................................................................... .8 -
B - 4JH1-TC Engine............................................................................................................. .2 -
C - Intercooler of upside installation type.(4JJ* Engine)...................................................... .3 .3
COMMON CHAMBER AND/OR GASKET, INLET - REPLACE

6V J0220 1.4 -
MANIFOLD, INTAKE UPPER - R&R OR REPLACE

POLICY:P
HFV6 J0221 .6 -
ENGINE J - 31
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
MANIFOLD, INTAKE LOWER - R&R OR REPLACE

POLICY:P
HFV6 J0224 .9 -
PUMP AND/OR GASKET, VACUUM - REPLACE

DIESEL J0240 .7 1.6
ADD:
A - With A/C (EXC. 4JJ1/4JK1 Engine)............................................................................... .3 -
B - 4JJ1/4JK1 Engine.......................................................................................................... .9 -
FLEXIBLE PIPE, VACUUM PUMP - REPLACE

DIESEL J0245 .2 -
HOSE (ONE), VACUUM - REPLACE J0250 .2 .2

ADD:
A - To Replace Hose (One Additional)................................................................................ .2 .2
TANK, VACUUM - REPLACE

ONE J0260 .2 .2
COVER, ENGINE - REPLACE J0290 .2 .2
COVER AND/OR GASKET, ROCKER - R&R OR REPLACE

POLICY: P
HFV6 J0302 1.2 -
4J J0303 .3 .6
6V J0307 1.0 -
C24*E J0311 .3 -
ADD:
A - 6V*1 Engine, Right......................................................................................................... .6 -
B - 4JH1-T/4JJ1/4JK1 Engine............................................................................................. .3 -
C - 4JH1-TC Engine............................................................................................................ .2 -
D - HFV6 Engine, Right bank.............................................................................................. .2 -
E - Clean Rocker Cover Assembly...................................................................................... .1
F - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
J - 32 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
ROCKER ARM - REPLACE

POLICY: P, T
INC: R&R rocker cover and install new gasket.
HFV6 J0352 7.2 -
4J J0353 .6 3.0
C24*E J0361 .7 -
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... 2.4 -
B - 4JH1-TC or T Engine..................................................................................................... .2 -
C - HFV6 Engine (Left Bank)............................................................................................... .3 -
D - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
VALVE LASH - ADJUST

4J J0423 .5 1.1
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... .6 -
B - 4JH1-TC or T Engine..................................................................................................... .2 -
C - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
6V J0427 3.3 -
GASKET, CYLINDER HEAD - REPLACE

POLICY: P, T
INC: R&R rocker cover, loosen rocker arms (diesel only) and remove push
rods (diesel only), D&C exhaust pipe and make all nec adjustments.
HFV6 J0502 8.7 -
4J J0503 3.6 6.7
6V J0507 3.9 -
C24*E J0508 3.5 -
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... 2.7 -
B - 6V*1 Engine, Right......................................................................................................... 2.2 -
C - 4JH1-TC or T Engine..................................................................................................... .2 -
D - 4J** Engine with A/C for Pick Up Model......................................................................... .3 -
E - With A/C for Wagon Model............................................................................................ .4 -
F - With A/C......................................................................................................................... - .4
G - HFV6 Engine (Right Bank)............................................................................................ .4 -
(CONTINUED)
ENGINE J - 33
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
H - HFV6 Engine (Both Bank).............................................................................................. 1.0 -
I - Intercooler of upside installation type(4JJ* Engine)......................................................... .3 .3
HEAD, CYLINDER - REPLACE

POLICY: P, T
INC: R&R rocker cover, loosen rocker arms (diesel only) and remove push
rods (diesel only) D&C exhaust pipe and make all nec adjustments.
HFV6 J0512 10.4 -
4J J0513 5.2 9.9
6V J0517 7.4 -
C24*E J0518 5.0 -
ADD:
A - 6V*1 Engine, Right......................................................................................................... .7 -
B - 6V*1 Engine, Both.......................................................................................................... 3.7 -
C - 4JH1-TC or T Engine..................................................................................................... .2 -
D - 4JJ1/4JK1 Engine.......................................................................................................... 4.3 -
E - 4J** Engine with A/C for Pick Up Model......................................................................... .3 -
F - With A/C for Wagon Model............................................................................................. .4 -
G - With A/C........................................................................................................................ - .4
H - HFV6 Engine (Left Bank)............................................................................................... .4 -
I - HFV6 Engine (Both Bank)............................................................................................... 2.7 -
J - Intercooler of upside installation type(4JJ* Engine)........................................................ .3 .3
VALVE - RECONDITION OR REPLACE

POLICY: P
INC: R&R rocker cover, rocker arms, push rods, cyl head, recondition
valve seat and replace valve seal and make all nec adjustments.
ONE CYL; HFV6 J0522 10.2 -
ONE CYL; 4J J0523 4.0 7.5
ONE CYL; 6V J0527 9.9 -
ONE CYL; C24*E J0528 4.4 -
ADD:
A - To Recondition Valves One Additional Cyl. (6V*1 Engine; The Same Cyl. Head)......... .4 -
INC: Replace valves as nec.
B - To Recondition Valves One Cyl. (HFV6 Engine Right Bank)......................................... .4 -
(CONTINUED)
J - 34 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
C - To Recondition All Valves (6V*1 Engine; The Same Cyl. Head)................................... .8 -
D - To Recondition All Valves (C24*E Engine).................................................................... 1.5 -
E - To Recondition All Valves (4JJ1/4JK1 Engine).............................................................. 2.3 2.3
F - To Recondition All Valves (HFV6 Engine Right Bank)................................................... 2.6 -
G - To Recondition All Valves (HFV6 Engine Left Bank)..................................................... 2.3 -
H - To Recondition All Valves (HFV6 Engine Both Bank).................................................... 4.9 -
I - 4JJ1/4JK1 Engine............................................................................................................ 3.5 -
J - 6V*1 Engine, Right......................................................................................................... .7 -
K - 6V*1 Engine, Both.......................................................................................................... 3.7 -
L - 4JH1-TC Engine............................................................................................................. .2 -
M - 4J** Engine with A/C for Pick Up Model........................................................................ .3 -
N - With A/C for Wagon Model............................................................................................ .4 -
O - With A/C........................................................................................................................ - .4
P - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
SPRING, CAP AND/OR SEAL, VALVE - REPLACE

POLICY: T, P
INC; R&R Cylinder head assy. (6V*1, C24*E)
ONE CYL; HFV6 J0542 7.6 -
ONE CYL; 4J J0543 1.0 3.1
ONE CYL; 6V J0547 4.0 -
ONE CYL; C24*E J0548 4.3 -
ADD:
A - To Replace Springs, Caps and/or Seals One Additional Cyl......................................... .3 .3
B - To Replace Springs, Caps and/or Seals One Additional Cyl. (C24*E Engine).............. .4 -
C - To Replace Springs, Caps and/or Seals One Additional Cyl. (HFV6 Engine)............... .4 -
D - To Replace Springs, Caps and/or Seals Two Additional Cyl. ....................................... .5 .5
E - To Replace Springs, Caps and/or Seals Two Additional Cyl. (C24*E Engine)............... .8 -
F - To Replace Springs, Caps and/or Seals One Additional Cyl. (HFV6 Engine)................ .8 -
G - To Replace All Springs, Caps and/or Seals................................................................... .7 .7
H - To Replace All Springs, Caps and/or Seals (C24*E Engine)......................................... 1.1 -
I - To Recondition All Springs, Caps and/or Seals (4JJ1/4JK1 Engine).............................. 1.0 1.0
J - To Recondition All Springs, Caps and/or Seals (HFV6 Engine)..................................... 2.5 -
K - 6V*1 Engine, Right......................................................................................................... 1.7 -
L - 4JH1-TC or T Engine...................................................................................................... .2 -
(CONTINUED)
ENGINE J - 35
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
M - 4JJ1/4JK1 Engine.......................................................................................................... 2.1 -
N - HFV6 Engine, Left Bank................................................................................................ .3 -
O - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
ADJUSTER, VALVE LASH - REPLACE

POLICY: P, T
HFV6 J0560 7.3 -
ADD:
A - To Replace Left Bank Adjuster...................................................................................... .2 -
B - To Replace Both Bank Adjuster..................................................................................... .5 -
PUSH ROD - REPLACE

POLICY: P, T
ONE CYL; 4J J0583 .6 -
ADD:
A - To Replace All Push Rods............................................................................................. .1 -
B - 4JH1-T* Engine.............................................................................................................. .2 -
LIFTER, VALVE - REPLACE

POLICY: P, T
ONE CYL; 4J J0623 6.1 -
ADD:
A - With A/C......................................................................................................................... .3 -
B - 4J** Engine for 4 x 4 Model............................................................................................ .9 -
C - To Replace All Lifters..................................................................................................... .2 -
D - For A/T........................................................................................................................... .8 -
BELT, DRIVE - ADJUST

NOTE: EXC. Serpentine Type
ONE; 4J J0653 .2 .2
ONE; C24*E J0659 .2 -
ADD:
A - To Adjust All belts.......................................................................................................... .1 .1
J - 36 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BELT, DRIVE - REPLACE

POLICY: T
A/C J0660 .2 .2
ADD:
A - C24*E Engine................................................................................................................. .1 -
FAN GENERATOR J0663 .3 .3
ADD:
A - C24*E Engine................................................................................................................. .3 -
B - 4JH1-T Engine............................................................................................................... .2 -
SERPENTINE J0667 .2 -
TENSIONER, SERPENTINE BELT - REPLACE J0680 .2 -

ADD:
A - HFV6 Engine.................................................................................................................. .1 -
PULLEY, CRANKSHAFT - REPLACE

POLICY: P, T
C24*E J0700 .7 -
HFV6 J0702 2.5 -
4J J0703 .6 .6
6V J0707 1.3 -
SPROCKET, CAMSHFT TIMING - REPLACE

POLICY: P, T
RIGHT BANK, INLET J0731 7.0 -
RIGHT BANK, EXHAUST J0732 7.0 -
LEFT BANK , INLET J0733 7.2 -
LEFT BANK, EXHAUST J0734 7.2 -
SEAL, CRANKCASE FRONT COVER - REPLACE (BELT TYPE)

POLICY: P
6V J0747 1.9 -
ENGINE J - 37
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SEAL, TIMING COVER OIL - REPLACE (GEAR TYPE)

POLICY: P
INC: R&R harmonic balancer.
HFV6 J0752 2.6 -
4J J0753 .7 .7
TENSIONER AND/OR SHOE AND/OR GUIDE, TIMING CHAIN - REPLACE

POLICY: P, T
RIGHT BANK SECONDLY J0761 6.9 -
LEFT BANK SECONDLY J0762 7.1 -
PRIMARILY J0763 7.0 -
CHAIN, TIMING - REPLACE

POLICY: P, T
RIGHT BANK SECONDLY J0764 7.0 -
LEFT BANK SECONDLY J0765 7.2 -
PRIMARILY J0766 7.1 -
COVER AND/OR GASKET, TIMING - REPLACE

POLICY: P
C24*E J0780 1.1 -
HFV6 J0782 6.6 -
4J J0783 1.2 2.0
6V J0787 1.3 -
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... .8 -
J - 38 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
HOUSING AND/OR GASKET, TIMING PULLEY - REPLACE

INC: R&R Engine Assy. (4J** Engine)
4J J0793 6.4 6.4
C24*E J0799 1.6 -
ADD:
A - To Replace Timing Gear................................................................................................ 2.2 2.2
B - With A/C......................................................................................................................... .3 .3
C - For 4 x 4 Model.............................................................................................................. .9 .9
D - For A/T........................................................................................................................... .8 .8
E - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
BELT, CAMSHAFT DRIVE - REPLACE

POLICY: P, T
INC: Adjust
C24*E J0800 1.1 -
6V J0807 1.6 -
PULLEY IDLER TIMING - REPLACE

POLICY: P, T
6V J0817 1.6 -
TENSIONER ASSEMBLY, TIMING BELT - REPLACE

6V J0818 1.6 -
C24*E J0828 1.1 -
GEAR, IDLER TIMING - REPLACE

4J J0823 1.5 2.0
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... .5 -
GEAR, CRANKSHAFT TIMING - REPLACE

POLICY: P, T
HFV6 J0832 7.1 -
4J J0833 1.6 2.3
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... .7 -
ENGINE J - 39
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
GEAR, CAMSHAFT TIMING - REPLACE

POLICY: P, T
4J J0843 1.6 1.6
ADD:
A - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
CAMSHAFT - REPLACE
POLICY: P, T
NOTE: EXC. 4JJ1/4JK1 and HFV6 Engines.
INC: R&R radiator, harmonic balancer, cover and seal. Replace
camshaft gear if nec. Adjust valves.
4J J0853 6.0 -
6V(LEFT) J0857 1.2 -
6V(RIGHT) J0858 1.3 -
C24*E J0860 3.6 -
ADD:
A - With A/C......................................................................................................................... .3 -
B - 4J** Engine for 4 x 4 Model............................................................................................ .9 -
C - To Replace All Valve Lifter............................................................................................. .1 -
D - For A/T........................................................................................................................... .8 -
SEAL, CAMSHAFT OIL - REPLACE J0861 1.4 -

ADD:
A - 6V*1 Engine................................................................................................................... .7 -
B - To Replace Second Camshaft Oil Seal.......................................................................... .2 -
CAMSHAFT, INTAKE - REPLACE

POLICY: P, T
HFV6 J0862 7.1 -
ADD:
A - To Replace Left Bank Intake Camshaft ........................................................................ .2 -
CAMSHAFT, EXHAUST - REPLACE

POLICY: P, T
HFV6 J0863 7.1 -
J - 40 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
ADD:
A - To Replace Left Bank Exhaust Camshaft...................................................................... .2 -
CAMSHAFT, EXHAUST - REPLACE

4JJ1/4JK1 J0864 1.5 1.5
ADD:
A - To Replace Intake Camshaft.......................................................................................... .4 .4
B - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
TENSIONER ASSEMBLY, AND/OR GASKET TIMING CHAIN - REPLACE

4JJ1/4JK1 J0865 .6 .6
ADD:
A - With A/C......................................................................................................................... .2 .2
CHAIN, TIMING - REPLACE

4JJ1/4JK1 J0866 2.7 2.7
ADD:
A - With A/C......................................................................................................................... .2 .2
B - To Replace Sprocket, Cam Drive................................................................................... .2 .2
C - To Replace Sprocket, Supply Pump.............................................................................. .1 .1
LEVER, TIMING CHAIN - REPLACE

4JJ1/4JK1 J0867 2.7 2.7
ADD:
A - With A/C......................................................................................................................... .2 .2
B - To Replace Guide.......................................................................................................... .2 .2
C - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
CAP, OIL FILLER - REPLACE J0900 .2 .2
TUBE, DIPSTICK - REPLACE J0930 .2 .2

ADD:
A - 4JH1-T Engine............................................................................................................... .2 -
B - HFV6 Engine.................................................................................................................. .2 -
ENGINE J - 41
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
FILTER, OIL - REPLACE

C24*E J0950 .2 -
HFV6 J0950 .2 -
4J J0953 .3 .3
6V J0957 .4 -
ADAPTER, OIL FILTER - REPLACE J0961 .5 -

ADD:
A - 6V*1 Engine................................................................................................................... 1.0 -
B - 4J** Engine.................................................................................................................... .3 -
PAN AND/OR GASKET OIL - REPLACE

4J J0992 .4 .4
ADD:
A - EXC. 4JH1-T/4JJ1/4JK1 Engine.................................................................................... .4 -
6V J0996 .8 -
C24*E J0998 4.1 -
HFV6 J0999 9.5 -
ADD:
A - With Auto Trans (HFV6 Engine)..................................................................................... 2.0 -
B - For 4x4 Model (HFV6 Engine)........................................................................................ .9 -
CRANKCASE OR MAIN PAN AND/OR GASKET, OIL - REPLACE

POLICY: P
INC: R&R Engine Assy. or Front Axle Case Assy.,
Clean Oil Pump Screen.
4J J1003 4.6 12.0
6V J1009 3.6 -
ADD:
A - With A/C......................................................................................................................... .3 .3
B - For A/T Pick Up Model (4J** Engine)............................................................................. .8 -
C - For A/T Wagon Model.................................................................................................... 1.1 -
D - For 4x4 Pick Up Model................................................................................................... 1.1 -
E - For 4x4 Wagon Model.................................................................................................... .8 -
F - For 4x4 Model (C24*E Engine)....................................................................................... .5 -
G - For 4x4 Model (4JH* Engine)......................................................................................... 2.9 -
(CONTINUED)
J - 42 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
H - For 4x4 Model (6V** Engine)......................................................................................... 3.9 -
I - 4JJ1/4JK1 Engine............................................................................................................ 7.4 -
J - For A/T Model................................................................................................................. - 1.1
K - For 4x4 Model................................................................................................................ - .8
L - Intercooler of upside installation type(4JJ* Engine)........................................................ .3 .3
PUMP, ENGINE OIL - REPLACE

POLICY: P, T
NOTE : 4J, 6V - Inc. R&R Engine Assy., and R&R Oil Pan.
C24*E J1020 6.5 -
HFV6 J1022 7.2 -
4J J1023 1.9 2.0
6V J1027 4.1 -
ADD:
A - For 4x4 Model (C24*E Engine)...................................................................................... .5 -
B - For 4x4 Model (EXC. 4J** Engine and HFV6 Engine).................................................... 3.0 -
C - For 4x4 Model (4J** Engine EXC. 4JJ1/4JK1 Engine)................................................... 2.9 -
D - With A/C (4J** Engine).................................................................................................. .3 .3
E - For A/T (EXC. 4JJ1/4JK1 Engine and HFV6 Engine).................................................... .8 -
F - 4J** Engine (EXC. 4JJ1/4JK1 Engine)........................................................................... 2.9 -
G - For Wagon Model.......................................................................................................... .1 -
H - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
STRAINER, OIL - REPLACE

6V J1030 3.3 -
4J J1034 .5 12.0
C24*E J1036 5.6 -
HFV6 J1037 9.5 -
ADD:
A - 4J** Engine (EXC. 4JH1-T/4JJ1/4JK1 Engine).............................................................. .4 -
B - For 4x4 Model (C24*E Engine)...................................................................................... .5 -
C - For 4x4 Model (6V** Engine)......................................................................................... 3.9 -
D - With A/C (Engine Remove Work only)........................................................................... .3 .3
E - 4JJ1/4JK1 Engine.......................................................................................................... 11.5 -
F - For 4x4 Model (4JJ1/4JK1 Engine)................................................................................ .8 .8
(CONTINUED)
ENGINE J - 43
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
G - For A/T (4JJ1/4JK1 Engine).......................................................................................... 1.1 1.1
H - For 4x4 Model (HFV6 Engine)....................................................................................... .9 -
I - With Auto Trans (HFV6 Engine)...................................................................................... 2.0 -
OIL GALLERY - REPLACE

6V J1040 3.6 -
KIT, OIL CATCH TANK - INSTALL J1090 1.0 1.0

POLICY: A
SEALS, CRANKSHAFT REAR MAIN - REPLACE

POLICY: P
INC: R&R transmission.
C24*E J1120 2.7 -
HFV6 J1122 10.1 -
4J J1123 2.3 2.3
6V J1127 4.4 -
ADD:
A - For 4x4 Model (EXC. HFV6 Engine).............................................................................. .8 .8
B - For A/T Pick Up Model (EXC.HFV6 Engine).................................................................. .4 -
C - For A/T Wagon Model.................................................................................................... .9 -
D - For Pick Up Model (4J** Engine)................................................................................... .8 -
E - For A/T Model................................................................................................................. - .9
F - For 4x4 Model (HFV6 Engine)........................................................................................ .9 -
G - With Auto Trans (HFV6 Engine).................................................................................... 2.0 -
BEARING, CRANKSHAFT MAIN - REPLACE

POLICY: P, T
INC; R&R engine Assy., Oil Pan and Flywheel Housing,
Plastic Type Gauge Bearing
ONE BEARING; C24*E J1150 9.1 -
ONE BEARING; HFV6 J1152 13.5 -
ONE BEARING; 4J J1153 7.5 13.6
ONE BEARING; 6V J1157 8.6 -
(CONTINUED)
J - 44 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
ADD:
A - To Replace Main Bearings (One Additional).................................................................. .2 .2
B - To Replace Main Bearings (Two Additional).................................................................. .4 .4
C - To Replace All Main Bearings........................................................................................ .8 .8
D - To Replace Connecting Rod Bearings (One Additional)................................................ .2 .2
E - To Replace Connecting Rod Bearings (Two Additional)................................................ .3 .3
F - To Replace All Connecting Rod Bearings...................................................................... .5 .5
G - For 4 x 4 Pick Up Model (EXC. 4J Engine).................................................................... .9 -
H - For 4 x 4 Wagon Model.................................................................................................. .8 -
I - For A/T Pick Up Model (EXC. HFV6 Engine)................................................................... .8 -
J - For A/T Wagon Model..................................................................................................... 1.1 -
K - For Pick Up Model with A/C (Engine Remove Work only)............................................. .3 -
L - For Wagon Model with A/C (Engine Remove Work only)............................................... .4 -
M - 4JJ1/4JK1 Engine.......................................................................................................... 6.1 -
N - For 4 x 4 Model (4J** Engine EXC. 4JJ1/4JK1 Engine)................................................. 2.9 -
O - With A/C (Engine Remove Work only).......................................................................... - .4
P - For A/T Model................................................................................................................. - 1.1
Q - For 4 x 4 Model.............................................................................................................. - .8
R - With Auto Trans (HFV6 Engine).................................................................................... 2.0 -
S - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
BEARING, CONNECTING ROD - REPLACE

POLICY: P, T
INC: R&R oil pan, oil pump, plastic type gauge bearings ,
clean and inspect oil pump and pan.
: 6V - R&R Front axle Housing Complete.
ONE BEARING; C24*E J1180 5.6 -
ONE BEARING; HFV6 J1182 12.2 -
ONE BEARING; 4J J1183 5.2 12.2
ONE BEARING; 6V J1187 7.2 -
ADD:
A - To Replace Connecting Rod Bearings (One Additional)................................................ .2 .2
B - To Replace Connecting Rod Bearings (Two Additional)................................................ .3 .3
C - To Replace All Connecting Rod Bearings...................................................................... .5 .5
D - For 4 x 4 Model (4J** Engine EXC. 4JJ1/4JK1 Engine)................................................. 2.9 -
(CONTINUED)
ENGINE J - 45
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
E - For 4 x 4 Pick Up Model (C24*E/4JJ1/4JK1 Engine)..................................................... .9 -
F - For 4 x 4 Wagon Model.................................................................................................. .8 -
G - For A/T Pick Up Model................................................................................................... .8 -
H - For A/T Wagon Model.................................................................................................... 1.1 -
I - For Pick Up Model with A/C (Engine Remove Work only)............................................... .3 -
J - For Wagon Model with A/C (Engine Remove Work only)............................................... .4 -
K - 4JJ1/4JK1 Engine.......................................................................................................... 7.0 -
L - With A/C (Engine Remove Work only)........................................................................... - .4
M - For A/T Model................................................................................................................ - 1.1
N - For 4 x 4 Model.............................................................................................................. - .8
O - With Auto Trans (HFV6 Engine).................................................................................... 2.0 -
P - For 4x4 Model (HFV6 Engine)........................................................................................ .9 -
Q - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
CRANKSHAFT - REPLACE
POLICY: P, T
INC: R&R engine assy. R&R Cyl. Head Assy, Oil Pan and Flywheel
Housing, Plastic Type Gauge Bearings.
C24*E J1200 9.4 -
4J J1203 7.5 13.7
6V J1207 8.6 -
ADD:
A - For Pick Up Model with A/C........................................................................................... .3 -
B - For Wagon Model with A/C............................................................................................ .4 -
C - For 4 x4 Model (EXC. C24*E/4JJ1/4JK1 Engine).......................................................... 2.9 -
D - To Replace Rod and/or Pin Only (One)....................................................................... .3 .3
E - To Replace Rod and/or Pin Only (Two)......................................................................... .6 .6
F - To Replace Rod and/or Pin Only (All)............................................................................ .9 .9
G - To Replace Cylinder Head............................................................................................. 1.2 1.2
H - To Replace Cylinder Head (C24*E Engine)................................................................... 4.6 -
I - To Recondition or Replace All Valve............................................................................... 1.7 1.7
J - To Replace Piston, Rod and/or Rings (One).................................................................. .3 .3
K - To Replace Piston, Rod and/or Rings (Two).................................................................. .6 .6
L - To Replace Piston, Rod and/or Rings (All)..................................................................... .9 .9
M - To Replace Cylinder Liner (One)................................................................................... .5 -
(CONTINUED)
J - 46 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
N - To Replace Cylinder Liner (Two)................................................................................... 1.0 -
O - To Replace Cylinder Liner (All)...................................................................................... 1.6 -
P - 4JJ1/4JK1 Engine.......................................................................................................... 6.2 -
Q - For A/T Pick Up Model................................................................................................... .8 -
R - For A/T Wagon Model.................................................................................................... 1.1 -
S - To Replace Rod and/or Pin only (All) (6V*1 Engine)...................................................... 1.3 -
T - To Replace Piston Rod and/or Rings (All) (6V*1 Engine).............................................. 1.4 -
U - For 4x4 Pick Up Model................................................................................................... .9 -
V - For 4x4 Wagon Model.................................................................................................... .8 -
W - With A/C........................................................................................................................ - .4
X - For A/T Model................................................................................................................. - 1.1
Y- For 4x4 Model................................................................................................................. - .8
Z - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
HFV6 J1210 14.6 -
ADD:
A - To Replace Rod and/or Pin Only (One)....................................................................... .3 -
B - To Replace Rod and/or Pin Only (Two)......................................................................... .6 -
C - To Replace Rod and/or Pin Only (All)............................................................................ .9 -
G - To Replace Piston, Rod and/or Rings (One)................................................................. .3 -
H - To Replace Piston, Rod and/or Rings (Two).................................................................. .6 -
I - To Replace Piston, Rod and/or Rings (All)...................................................................... .9 -
D - To Replace Cylinder Head (One Bank).......................................................................... 1.7 -
E - To Replace Cylinder Head (Both Bank)......................................................................... 3.4 -
F - To Recondition or Replace All Valve.............................................................................. 7.5 -
J - With Auto Trans (HFV6 Engine)..................................................................................... 2.0 -
K - For 4x4 Model................................................................................................................ .9 -
PISTON, ROD AND/OR RINGS - REPLACE

POLICY: P, T
INC: R&R oil pan and cyl head, R&R piston and rod assy.
: 6V - R&R Front Axle Housing Complete.
ONE CYL; HFV6 J1302 13.5 -
ADD:
A - To Recondition or Replace All Valves............................................................................ 4.9 -
B - To Replace Piston, Rod and/or Rings (One).................................................................. .3 -
(CONTINUED)
ENGINE J - 47
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
C - To Replace Piston, Rod and/or Rings (Two).................................................................. .6 -
D - To Replace Piston, Rod and/or Rings (All).................................................................... .9 -
D - To Replace Cylinder Head (One Bank).......................................................................... 1.7 -
E - To Replace Cylinder Head (Both Bank)......................................................................... 3.4 -
J - With Auto Trans (HFV6 Engine)..................................................................................... 2.0 -
K - For 4x4 Model................................................................................................................ .9 -
ONE CYL; 4J J1303 8.6 12.3
ONE CYL; 6V J1307 9.0 -
ONE CYL; C24*E J1309 7.6 -
ADD:
A - To Recondition or Replace All Valves............................................................................ 1.7 1.7
B - To Replace Piston, Rod and/or Rings (One).................................................................. .3 .3
C - To Replace Piston, Rod and/or Rings (Two).................................................................. .6 .6
D - To Replace Piston, Rod and/or Rings (All).................................................................... .9 .9
E - To Replace Cylinder Liner (One).................................................................................... .5 -
F - To Replace Cylinder Liner (Two).................................................................................... 1.0 -
G - To Replace Cylinder Liner (All)...................................................................................... 1.6 -
H - To Replace Cylinder Head............................................................................................. 1.2 1.2
I - To Replace Cylinder Head (C24*E Engine)..................................................................... 4.6 -
J - 4JJ1/4JK1 Engine........................................................................................................... 3.7 -
K - For 4 x 4 Model (EXC. C24*E/4JJ1/4JK1 Engine)......................................................... 2.9 -
L - For 4 x 4 Pick Up Model................................................................................................ .9 -
M - For 4 x 4 Wagon Model................................................................................................. .8 -
N - For A/T Pick Up Model................................................................................................... .8 -
O - For A/T Wagon Model.................................................................................................... 1.1 -
P - For Pick Up Model with A/C........................................................................................... .3 -
Q - For Wagon Model with A/C............................................................................................ .4 -
R - To Replace Piston, Rod and/or Rings (All) (6V*1 Engine)............................................. 1.9 -
S - With A/C ........................................................................................................................ - .4
T - For A/T Model................................................................................................................. - 1.1
U - For 4 x 4 Model.............................................................................................................. - .8
V - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
J - 48 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
FLYWHEEL (AUTOMATIC TRANSMISSION) - REPLACE J1401 2.9 2.9

POLICY: P
ADD:
A - For 4 x 4 Pick Up Model................................................................................................. .9 -
B - For 4 x 4 Wagon Model.................................................................................................. .8 -
C - For Pick Up Model........................................................................................................ .3 -
D - For 4 x 4 Model.............................................................................................................. - .8
E - HFV6 Engine.................................................................................................................. 2.8 -
FLYWHEEL (MANUAL TRANSMISSION) - REPLACE

POLICY: P
INC: R&R trans.
C24*E J1420 2.6 -
HFV6 J1422 3.8 -
4J J1423 2.3 2.3
6V J1427 4.1 -
ADD:
A - To Replace Clutch Pilot Bearing.................................................................................... .2 .2
B - To Replace Ring Gear................................................................................................... .5 .5
C - For 4 x 4 Model (EXC. HFV6 Engine)............................................................................ .8 .8
D - For Pick Up Model (EXC.HFV6 Engine)....................................................................... .5 -
E - For 4x4 Model (HFV6 Engine)........................................................................................ .9 -
MOUNT, ENGINE - REPLACE

POLICY: P
FRONT RIGHT J1500 .4 1.2
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... .8 -
B - HFV6 Engine.................................................................................................................. .6 -
FRONT LEFT J1501 .4 1.2
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... .8 -
B - HFV6 Engine.................................................................................................................. 1.6 -
6V FRONT RIGHT J1502 1.7 -
6V FRONT LEFT J1503 1.7 -
FRONT BOTH J1507 .6 1.4
(CONTINUED)
ENGINE J - 49
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... .8 -
B - HFV6 Engine.................................................................................................................. 2.0 -
6V FRONT BOTH J1508 3.2 -
PLUG, EXPANSION - REPLACE J1600 .4 .4

POLICY: P
NOTE: Add appropriate labor operation time(s) for removal of necessary
components to gain access to plug to regular labor hours column.
PLUG, OIL GALLERY - REPLACE

POLICY: P
INC: R&R flywheel.
4J J1643 4.0 4.0
BLOCK, ENGINE FITTED - R&R OR REPLACE

POLICY: P, T
INC: R&R Engine Assy.
C24*E J1800 10.7 -
HFV6 J1802 15.5 -
4J J1803 10.5 14.7
6V J1807 11.6 -
ADD:
A - With A/C (EXC. HFV6 Engine)....................................................................................... .3 .3
B - For 4 x 4 Pick Up Model................................................................................................. .9 -
C - For 4 x 4 Wagon Model.................................................................................................. .8 -
D - To Boring....................................................................................................................... ST ST
E - To Replace Cylinder Head............................................................................................. 1.2 -
F - To Replace Cylinder Head (4JJ1/4JK1 Engine)............................................................. 3.1 3.1
G - To Replace Cylinder Head (HFV6 Engine, One Bank).................................................. 1.7 -
H - To Replace Cylinder Head (HFV6 Engine, Both Bank).................................................. 3.4 -
I - To Recondition or Replace All Valves............................................................................. 1.7 1.7
J - To Recondition or Replace All Valves (HFV6 Engine).................................................... 7.5 -
K - 4JJ1/4JK1 Engine.......................................................................................................... 4.2 -
L - For A/T Model................................................................................................................. .8 .8
(CONTINUED)
J - 50 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
M - For 4 x 4 Model.............................................................................................................. - .8
N - With Auto Trans (HFV6 Engine).................................................................................... 2.0 -
O - With Turbochager (4J** Engine, EXC. 4JJ1/4JK1 Engine)............................................ .8 -
P - With EGR Cooler (4J** Engine, EXC. 4JJ1/4JK1 Engine)............................................. .4 -
Q - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
ENGINE PARTIAL/BASIC - REPLACE

POLICY: A, P, T
C24*E J1820 8.2 -
HFV6 J1822 11.7 -
4J J1823 8.7 13.1
6V J1827 10.3 -
ADD:
B - To Recondition or Replace All Valves............................................................................ 1.7 1.7
C - To Recondition or Replace All Valves (HFV6 Engine)................................................... 7.5 -
D - To Replace Cylinder Head............................................................................................. 1.2 -
E - To Replace Cyl. Head (4JJ1/4JK1 Engine).................................................................... 3.1 3.1
F- To Replace Cyl. Head (C24*E Engine)........................................................................... 1.7 -
G - To Replace Cylinder Head (HFV6 Engine, One Bank).................................................. 1.7 -
H - To Replace Cylinder Head (HFV6 Engine, Both Bank).................................................. 3.4 -
I- For 4 x 4 Pick Up Model................................................................................................... .9 -
J - For 4 x 4 Wagon Model.................................................................................................. .8 -
K - For A/T Pick Up Model (EXC. HFV6 Engine)................................................................. .8 -
L - For A/T Wagon Model.................................................................................................... 1.1 -
M - 4JJ1/4JK1 Engine.......................................................................................................... 4.4 -
N - For A/T Model................................................................................................................ - 1.1
O - For 4 x 4 Model.............................................................................................................. - .8
P - With Auto Trans (HFV6 Engine)..................................................................................... 2.0 -
Q - With Turbochager (4J** Engine, EXC. 4JJ1/4JK1 Engine)............................................ .8 -
R - With EGR Cooler (4J** Engine, EXC. 4JJ1/4JK1 Engine)............................................. .4 -
S - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
ENGINE J - 51
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
ENGINE UNIVERSAL - REPLACE

POLICY: P, T
6V J1840 8.7 -
ADD:
A - With A/C......................................................................................................................... .3 -
B - For 4 x 4 Model.............................................................................................................. .9 -
C - With Auto Trans............................................................................................................. .8 -
ENGINE ASSEMBLY - REPLACE

POLICY: A, P, T
C24*E J1880 4.9 -
HFV6 J1882 6.1 -
4J J1883 4.2 5.1
6V J1887 5.8 -
ADD:
B - 4JJ1/4JK1 Engine.......................................................................................................... .9 -
C - For 4 x 4 Pick Up Model................................................................................................. .9 -
D - For 4 x 4 Wagon Model.................................................................................................. .8 -
E - For A/T Pick Up Model (EXC.HFV6 Engine).................................................................. .8 -
F - For A/T Wagon Model (EXC.HFV6 Engine)................................................................... 1.1 -
G - For A/T Model................................................................................................................ - 1.1
H - For 4x4 Model................................................................................................................ - .8
I - With Auto Trans (HFV6 Engine)...................................................................................... 2.0 -
CAP, RADIATOR FILLER - REPLACE J3020 .2 .2

INC: Diagnosis to pressure test cap.
COCK OF PLUG, RADIATOR DRAIN - REPLACE J3040 .3 .3

INC: Drain and refill.
J - 52 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
RADIATOR ASSEMBLY - R&R J3080 .4 .7

ADD:
A - 6V*1 Engine................................................................................................................... .3 -
B - 4JH1 Engine (EXC. 4JH1-TC Engine)........................................................................... .2 -
C - 4JJ1/4JK1 Engine.......................................................................................................... .3 -
D - HFV6 Engine.................................................................................................................. .5 -
RADIATOR ASSEMBLY - REPLACE J3100 .4 .7

POLICY: T
ADD:
A - 6V*1 Engine................................................................................................................... .3 -
B - 4JH1 Engine (EXC. 4JH1-TC Engine)........................................................................... .2 -
C - 4JJ1/4JK1 Engine.......................................................................................................... .3 -
D - HFV6 Engine.................................................................................................................. .5 -
COOLER, ENGINE OIL - REPLACE

POLICY: P, T
4J J3123 .5 3.7
ADD:
A- To Repair Core................................................................................................................ 1.0 -
B- To Replace Core............................................................................................................. 1.0 -
C - 4JJ1/4JK1 Engine.......................................................................................................... 3.2 -
TUBE, OVERFLOW - REPLACE J3180 .2 .2
SHROUD, RADIATOR FAN - REPLACE

ONE PIECE J3247 .2 .2
TWO PIECE TYPE; UPPER J3248 .2 .2
TWO PIECE TYPE; LOWER J3249 .4 .4
TWO PIECE TYPE; BOTH J3250 .4 .4
RESERVOIR, RADIATOR COOLANT - REPLACE J3260 .2 .2

ENGINE J - 53
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
CLAMP, RADIATOR HOSE - REPLACE

ONE J3340 .2 .2
ADD:
A - To Replace Clamp (One Additional).............................................................................. .1 .1
B - To Replace Clamp (Two Additional)............................................................................... .2 .2
C - To Replace Clamp (Three Additional)............................................................................ .3 .3
D - To Replace Clamp (Four Additional).............................................................................. .4 .4
HOSE, ENGINE COOLANT - REPLACE

POLICY: T
INC: Drain and refill radiator as nec.
UPPER J3362 .2 .2
LOWER J3363 .3 .3
ADD:
A - HFV6 Engine (J3363 Only)............................................................................................ .1 -
BOTH J3367 .4 .4
ADD:
A - 4JH1 or 6V*1 Engine (J3367 Only)................................................................................ .1 -
COOLING FAN - REPLACE J3380 .3 .6

POLICY: T
INC: R&R Fan Clutch Assy if any.
ADD:
A - 6V*1 Engine................................................................................................................... .2 -
B - C24*E Engine................................................................................................................. .3 -
C - For Wagon Model.......................................................................................................... .3 -
D - HFV6 Engine.................................................................................................................. .4 -
CLUTCH ASSEMBLY, COOLING FAN - REPLACE J3390 .3 .6

ADD:
A - 6V*1 Engine................................................................................................................... .2 -
B - C24*E Engine................................................................................................................. .3 -
C - For Wagon Model.......................................................................................................... .3 -
J - 54 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
PULLEY, COOLANT PUMP - REPLACE J3420 .3 .5

POLICY: P, T
NOTE: Applicable for both "W/fan clutch" and "W/O fan clutch" models.
INC: Adjust belt tension.
ADD:
A - 6V*1 Engine................................................................................................................... .2 -
B - C24*E Engine................................................................................................................. .3 -
C - For Wagon Model.......................................................................................................... .2 -
PUMP AND/OR GASKET, COOLANT - REPLACE

POLICY: P, T
INC: Drain and refill radiator as nec.
C24*E J3480 1.2 -
HFV6 J3482 .5 -
4J J3483 .7 .7
6V J3487 1.9 -
ADD:
B - For Pick Up Model (EXC. HFV6 Engine)........................................................................ .3 -
THERMOSTAT, OUTLET AND/OR GASKET - REPLACE J3500 .4 .4

POLICY: P
NOTE: EXC. 6V*1 and HFV6 Engines
INC: Drain and refill radiator as necessary and test thermostat.
THERMOSTAT, INLET AND/OR GASKET - REPLACE J3505 .2 -

POLICY: P
NOTE: For 6V*1 and HFV6 Engines.
INC: Drain and refill radiator as necessary and test thermostat.
ADD:
A - HFV6 Engine.................................................................................................................. 2.0 -
HOUSING AND/OR GASKET, THERMOSTAT - REPLACE J3520 .4 .4

POLICY: P
ENGINE J - 55
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
COOLING SYSTEM - FLUSH J3540 .8 .8

INC: Drain cooling system, R&R thermostat, flush with clear water
and test coolant.
PULLEY AND/OR FAN, GENERATOR - REPLACE J4020 .4 .4

POLICY: T
ADD:
A - 6V*1 Engine................................................................................................................... .3 -
BEARING, GENERATOR - REPLACE

INC: R&R Generator, Separate end frame, and R&R rotor.
FRONT J4042 .9 .9
REAR J4043 .8 .8
BOTH J4047 1.0 1.0
ADD:
DIODE, CHARGING SYSTEM (JUMPER) - REPLACE J4050 1.4 1.4

INC: R&R and disassemble generator as nec.
ADD:
A - 4J*1 Engine With A/C (EXC. 4JJ1/4JK1 Engine)........................................................... .3 -
REGULATOR, VOLTAGE - TEST AND REPLACE J4060 1.4 1.4

POLICY: T
INC: R&R and disassemble generator as nec.
ADD:
A - 4J*1 Engine With A/C (EXC. 4JJ1/4JK1 Engine)........................................................... .3 -
GENERATOR ASSEMBLY - DISASSEMBLE, INSPECT, TEST AND REASSEMBLE

POLICY: T
INC: R&R Generator Assy.
DIESEL J4080 .7 .7
GASOLINE J4081 .4 -
(CONTINUED)
J - 56 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
ADD:
A - To Replace Rotor, Drive End Frame, Pulley, Fan and/or Front Bearing........................ .4 .4
B - To Replace Stator.......................................................................................................... .1 .1
C - To Replace Diode Trio................................................................................................... .7 .7
D - To Recondition Complete.............................................................................................. .7 .7
INC: All of the above additions.
NOTE: All of the above additions include time to inspect and test the
components on the bench upon installation of a new part.
E - 6V*1 Engine................................................................................................................... .3 -
F - 4J*1 Engine With A/C (EXC. 4JJ1/4JK1 Engine)........................................................... .3 -
GENERATOR ASSEMBLY - REPLACE

POLICY: T
INC: Transfer pulley and adjust belt tension.
DIESEL J4100 .7 .7
ADD:
A - 4JH1-T/4JA1 Engine With A/C....................................................................................... .3 -
GASOLINE J4101 .4 -
ADD:
A - HFV6 Engine.................................................................................................................. .3 -
BRACE, GENERATOR ADJUSTING - REPLACE J4120 .3 .3

POLICY: T
BRACKET, GENERATOR MOUNTING - REPLACE

POLICY: T
DIESEL J4160 .9 .9
ADD:
GASOLINE J4161 .7 -
ADD:
A - 6V*1 Engine................................................................................................................... .3 -
B - HFV6 Engine.................................................................................................................. .1 -
ENGINE J - 57
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
WIRES, SPARK PLUG - REPLACE

POLICY: T
ONE OR TWO J4206 .2 -
ALL J4207 .3 -
PLUGS, SPARK - REPLACE

POLICY: T
ONE OR TWO J4226 .3 -
ADD:
A - HFV6 Engine.................................................................................................................. .2 -
ALL J4227 .4 -
ADD:
A - HFV6 Engine.................................................................................................................. .2 -
COIL, IGNITION - REPLACE J4340 .3 -

POLICY: E, T
ADD:
A - C24*E Engine................................................................................................................. .9 -
COIL, ELECTRONIC IGNITION CONTROL - REPLACE J4345 .6 -

POLICY: E, T
ADD:
A - To Replace All Coils....................................................................................................... .1 -
B - Diagnosis Time.............................................................................................................. .3 -
SENSOR, CAMSHAFT POSITION - REPLACE J4350 .3 -

POLICY: E, T
ADD:
A - Diagnosis Time.............................................................................................................. .3 -
SENSOR, CRANKSHAFT POSITION - REPLACE J4355 .3 -

POLICY: E, T
(CONTINUED)
J - 58 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
ADD:
A - Diagnosis Time.............................................................................................................. .3 -
SENSOR, KNOCK - REPLACE J4437 .3 -

POLICY: E, T
ADD:
A - To Replace Both Banks................................................................................................. .1 -
B - Diagnosis Time.............................................................................................................. .3 -
SOLENOID, STARTER MOTOR - REPLACE J4580 .5 .7

POLICY: T
ADD:
A - 4JA1 Engine................................................................................................................... .2 -
B - 6VE1 Engine.................................................................................................................. .5 -
C - For Wagon Model.......................................................................................................... .2 -
DRIVE ASSEMBLY, STARTER MOTOR - REPLACE J4600 .7 .9

POLICY: T
INC: R&R starter motor.
ADD:
A - For Wagon Model.......................................................................................................... .2 -
MOTOR ASSEMBLY, STARTER - R&R J4620 .4 .6

POLICY: T
ADD:
A - To Replace Starter Drive Assy....................................................................................... .3 .3
B - To Recondition Starter Motor......................................................................................... .6 .6
INC: Adds A and D.
C - To Replace Field Coils................................................................................................... .4 .4
(CONTINUED)
ENGINE J - 59
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
D - To Recondition Armature............................................................................................... .2 .2
E - 6VE1 Engine.................................................................................................................. .4 -
F - For Wagon Model........................................................................................................... .2 -
G - Intercooler of upside installation type(4JJ* Engine)....................................................... .2 .2
MOTOR ASSEMBLY, STARTER - REPLACE J4640 .4 .6

POLICY: T
ADD:
A - 6VE1 Engine.................................................................................................................. .4 -
B - For Wagon Model.......................................................................................................... .2 -
C - HFV6 Engine.................................................................................................................. 2.2 -
SOLENOID, OR ACTUATOR FAST IDLE (DIESEL) - REPLACE J4750 .3 -

INC: Adjustment of fast idle speed.
ADD:
A - Diagnosis Time.............................................................................................................. .3 -
GLOW PLUG - REPLACE

ONE J4790 .2 .5
ADD:
A - To Replace Glow Plug (One or Two).............................................................................. .1 .1
B - To Replace Glow Plugs (All).......................................................................................... .2 .2
C - 4JJ1/4JK1 Engine.......................................................................................................... .3 -
AFTER GLOW TIMER - REPLACE J4794 .2 -
SWITCH, QOS THERMO - REPLACE J4796 .3 -

J - 60 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
AIR CLEANER ASSEMBLY - REPLACE

POLICY: A, E
C24*E J5000 .2 -
HFV6 J5002 .2 -
4J J5003 .3 .3
6V J5007 .3 -
ELEMENT, AIR CLEANER - REPLACE J5010 .2 .2
DUCT AND/OR HOSE, OUTSIDE AIR - REPLACE J5020 .7 .7

POLICY: E
DUCT AND/OR HOSE, AIR CLEANER TO INLET MANIFOLD - REPLACE J5021 .2 .2
DUCT AND/OR HOSE, TURBO. TO INLET MANIFOLD - REPLACE J5023 .3 .3
VALVE ASSEMBLY, INTAKE THROTTLE - R&R OR REPLACE J5275 .4 .4

ADD:
CABLE, ACCELERATOR CONTROL - REPLACE

POLICY: T
C24*E J5330 .3 -
4J J5333 .4 -
6V J5337 .2 -
SOLENOID, ENGINE STOP - REPLACE

POLICY: E
DIESEL J5345 .3 -
PEDAL, ACCELERATOR - REPLACE J5350 .4 .4
FILTER, FUEL ELEMENT - REPLACE J5420 .3 .5

ADD:
A - 4JH1/4JJ1/4JK1 Engine................................................................................................. .2 -
ENGINE J - 61
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
PUMP AND/OR GASKET, FUEL - REPLACE

POLICY: T
IN TANK ELECTRIC J5431 .9 .9
ADD:
A - EXC. 4J** Engine........................................................................................................... .2 -
REGULATOR, FUEL PRESSURE - REPLACE

GASOLINE J5560 .6 -
ADD:
A - 6V*1 Engine................................................................................................................... .4 -
PIPES & HOSES, FUEL FEED AND RETURN (FUEL PIPE ~ FUEL RAIL) J5640 .8 -
INJECTOR, FUEL (GASOLINE) - REPLACE

HFV6 (All Injector) J5649 1.0 -
6V J5650 .9 -
C24*E J5654 .4 -
ADD:
A - To Replace Each Additional Injector (EXC. HFV6 Engine)............................................ .1 -
B - To Replace All Injector (EXC. HFV6 Engine)................................................................. .2 -
C - Diagnosis Time.............................................................................................................. .3 -
RAIL, FUEL INJECTOR - REPLACE

6V J5660 1.0 -
C24*E J5663 .5 -
HFV6 J5664 1.0 -
RAIL ASSEMBLY, COMMON, FUEL INJECTION (DIESEL) - R&R OR REPLACE J5665 1.5 1.5
SENSOR, MASS AIR FLOW - REPLACE J5670 .3 -

ADD:
A - Diagnosis Time.............................................................................................................. .3 -
J - 62 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
INTERCOOLER COMPONENTS - REPLACE

INTERCOOLER ASSEMBLY J5685 .5 .5
ADD:
A - 4JH1-TC Engine............................................................................................................. .5 -
B - 4JJ1/4JK1 Engine (Intercooler of frontside installation type)......................................... .4 .4
TURBO TO INTERCOOLER INLET PIPE J5690 .3 -
ADD:
A - EXC. 4JJ1/4JK1 Engine................................................................................................. .2 -
INTER COOLER TO INTAKE MANIFOLD PIPE J5691 .3 .3
ADD:
A - EXC. 4JJ1/4JK1 Engine................................................................................................. .1 -
ONE RUBBER HOSE J5692 .2 .2
TWO RUBBER HOSE J5693 .2 .2
ADD:
A - To Replace Third Piece Rubber Hose............................................................................ .1 .1
B - EXC. 4JJ1/4JK1 Engine................................................................................................. .2 -
TURBOCHARGER ASSEMBLY - REPLACE

POLICY: P
4J J5863 1.4 2.1
ADD:
A - 4JJ1/4JK1 Engine.......................................................................................................... .7 -
PIPE, OIL PRESSURE (TURBO) - REPLACE J5866 .7 .7
PIPE, OIL RETURN (TURBO) - REPLACE J5867 .7 .7
PIPE, OIL PRESSURE & RETURN (TURBO) - REPLACE J5875 1.2 1.2
ADD:
A - For 4x4 Models............................................................................................................... .3 .3
HOSE, WATER RETURN (TURBO) - REPLACE J5885 .3 .3
HOSE, WATER FEED (TURBO) - REPLACE J5886 .3 .8

ADD:
(CONTINUED)
ENGINE J - 63
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
B - For Wagon Model.......................................................................................................... .5 -
INJECTOR, FUEL (DIESEL) - R&R OR REPLACE

POLICY: T
ONE J5926 .6 1.0
ADD:
A - To Replace Additional Injector (One or Two)................................................................. .2 .2
B - To Replace All Injectors................................................................................................. .3 .3
C - To Adjust Injection Pressure (1 - 2)............................................................................... .2 -
D - To Adjust Injection Pressure (3 - 4)............................................................................... .4 -
E - To Lap Nozzle................................................................................................................ ST -
F - 4JJ1/4JK1 Engine.......................................................................................................... .4 -
G - 4JH1-T Engine............................................................................................................... .3 -
H - Diagnosis Time (4JJ1/4JK1 Engine).............................................................................. .3 .3
I - Program ECM.................................................................................................................. .3 .3
LINE, FUEL INJECTION HIGH PRESSURE DIESEL - R&R OR REPLACE

POLICY: T
ONE J5935 .5 .9
ADD:
A - To Replace Additional Line (One).................................................................................. .1 .1
B - To Replace Additional Line (Two).................................................................................. .2 .2
C - To Replace All Lines...................................................................................................... .3 .3
D - 4JH1-T Engine............................................................................................................... 1.3 -
E - 4JJ1/4JK1 Engine.......................................................................................................... .4 -
F - 4JA1 Engine................................................................................................................... 1.1 -
G - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
LINE, FUEL RETURN - REPLACE J5937 .3 .3

ADD:
J - 64 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
PUMP, FUEL INJECTION DIESEL - REPLACE

POLICY: A, P, T
GEAR TYPE; 4J J5953 1.7 4.5
ADD:
A - 4JH1-TC Engine............................................................................................................. .4 -
B - 4JJ1/4JK1 Engine.......................................................................................................... 2.8 -
C - Diagnosis Time (4JJ1/4JK1 Engine).............................................................................. .3 .3
GASKET, TIMING COVER TO HOUSING, INJECTION PUMP - REPLACE J5960 .3 -

POLICY: P
NOTE: EXC. 4JJ1/4JK1 Engine.
GEAR AND/OR ADVANCE TIMING MECHANISM, FUEL INJECTION PUMP - REPLACE J5962 1.7 1.7
POLICY: P, T
TIMING, FUEL INJECTION PUMP DIESEL - ADJUST J5965 .5 -

POLICY: E
VALVE, SCV (SUCTION CONTROL VALVE) - REPLACE J5990 4.7 4.7
VALVE, PCV - REPLACE J6000 .3 .3

POLICY: E
SENSOR, AIR CLEANER TEMPERATURE - REPLACE J6200 .4 -

POLICY: E
ADD:
A - Diagnosis Time.............................................................................................................. .3 -
PIPE, EGR - R&R OR REPLACE J6269 .2 -
VALVE AND/OR GASKET, EGR - REPLACE J6270 .3 .4

POLICY: E, P
ADD:
A - 4JA1-TC Engine (Type Which has intercooler on a head, only).................................... .4 -
B - EXC. '03 ~ '04 Model...................................................................................................... .1 -
ENGINE J - 65
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
COOLER, EGR VALVE - REPLACE J6275 .5 .7

ADD:
A - 4J** Engine.................................................................................................................... .2 -
SWITCH, EGR/EFE THERMAL VACUUM - REPLACE J6340 .4 -

POLICY: E
VACUUM SWITCHING VALVE, THROTTLE - REPLACE J6351 .2 -
SENSOR, CRANKSHAFT ANGLE - REPLACE J6355 .3 .8

ADD:
A - C24*E Engine................................................................................................................. .9 -
B - 4JJ1/4JK1 Engine.......................................................................................................... .5 -
C - Diagnosis Time.............................................................................................................. .3 .3
OIL SEAL (O-RING), SENSOR, CRANKSHAFT ANGLE - REPLACE J6356 .3 .8

ADD:
A - C24*E Engine................................................................................................................. .9 -
B - For Wagon Model.......................................................................................................... .5 -
CONTROLLER, EDU(ENGINE DRIVE UNIT) - REPLACE J6359 .2 -

ADD:
A - C24*E Engine................................................................................................................. .1 -
B - 4J** Engine.................................................................................................................... .8 -
CONTROLLER, ECM (ENGINE CONTROL MODULE) - R&R OR REPLACE J6360 .3 .3

POLICY: E
ADD:
A - To Reprogram................................................................................................................ .3 .3
B - EXC. 4J** Engine........................................................................................................... .3 -
C - Diagnosis Time.............................................................................................................. .3 .3
J - 66 ENGINE
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SENSOR, BARO (BAROMETRIC PRESSURE) - REPLACE J6366 .3 -

ADD:
A - Diagnosis Time.............................................................................................................. .3 -
SENSOR, FUEL TEMPERATURE - REPLACE J6368 .2 .2

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
SENSOR, COOLANT TEMPERATURE - REPLACE J6369 .2 .2

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
SENSOR, MAP (MANIFOLD ABSOLUTE PRESSURE) - REPLACE J6370 .2 .2

POLICY: E
ADD:
A - HFV6 Engine.................................................................................................................. .1 -
B - Diagnosis Time.............................................................................................................. .3 .3
SENSOR, IAT/MAT (INTAKE AIR TEMPERATURE/MANIFOLD AIR TEMPERATURE) J6371 .3 .3

- REPLACE
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
SENSOR, O-2 (EXHAUST OXYGEN) - REPLACE J6372 .2 -

POLICY: E
ADD:
A - 6V*1 Engine................................................................................................................... .1 -
B - HFV6 Engine.................................................................................................................. .2 -
C - To Replace Each Additional Sensor.............................................................................. .1 -
D - Diagnosis Time.............................................................................................................. .3 -
SENSOR, ACCEL POSITION - REPLACE J6373 .4 .4

NOTE: Include clean all connector pins.
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
ENGINE J - 67
ENGINE
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SENSOR, THROTTLE POSITION - REPLACE J6374 .4 .4

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
SENSOR, CAMSHAFT ANGLE - REPLACE J6376 .2 .3

ADD:
A - 6V*1 Engine................................................................................................................... .2 -
B - 4JJ1/4JK1 Engine.......................................................................................................... .1 -
C - Diagnosis Time.............................................................................................................. .3 .3
SENSOR, AIR FLOW - REPLACE J6378 .3 -

ADD:
A - Diagnosis Time.............................................................................................................. .3 -
SENSOR, KNOCK - REPLACE J6379 .2 -

ADD:
A - Diagnosis Time.............................................................................................................. .3 -
MOTOR, STEPPING, THROTTLE - REPLACE J6380 .3 .3

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
CONTROLLER, EGR - REPLACE J6396 .3 -

ADD:
A - Diagnosis Time.............................................................................................................. .3 -
SENSOR, ENGINE SPEED - REPLACE J6540 .3 -

ADD:
A - Diagnosis Time.............................................................................................................. .3 -
K TRANSAXLE AND TRANSMISSION
K
K - 8 TRANSAXLE AND TRANSMISSION
CLUTCH & CONTROLS

CAB STYLE
VIN CODE
NUMBER
TF* UC*
CLUTCH SYSTEM, HYDRAULIC - BLEED K0040 .2 .2
PEDAL, SHAFT AND/OR BUSHING, CLUTCH - REPLACE K0060 .6 .6

INC: Adjust linkage.
PUSH ROD AND/OR SEAL, CLUTCH PEDAL - REPLACE K0080 .4 .4

POLICY: T
INC: Adjust linkage.
SPRING, CLUTCH PEDAL RETURN - REPLACE K0100 .6 .6
RESERVOIR,CLUTCH FLUID - REPLACE K0580 .2 -

NOTE:For HVF6 Engine
CYLINDER, CLUTCH MASTER - R&R OR REPLACE K0600 .4 .4

POLICY: T
INC: Bleed system.
ADD:
A - To Recondition Clutch Master cyl................................................................................... .2 .2
B - HFV6 Engine.................................................................................................................. .3 -
CYLINDER, CLUTCH DAMPER - R&R OR REPLACE K0610 .5 .5

POLICY: T
INC: Bleed system.
CYLINDER, SLAVE - R&R OR REPLACE K0620 .3 .3

POLICY: T
INC: Bleed system.
ADD:
A - To Recondition slave cyl................................................................................................ .1 .1
LINE, CLUTCH HYDRAULIC (MASTER CYLINDER TO SLAVE CYLINDER) - REPLACE

POLICY: T
PIPE K0646 .5 .5
TRANSAXLE AND TRANSMISSION K - 9
CLUTCH & CONTROLS

CAB STYLE
VIN CODE
NUMBER
TF* UC*
BEARING, CLUTCH RELEASE - REPLACE

(4 x 2) K0700 2.8 2.8
(4 x 4) K0701 3.8 3.8
INC: R&R trans, adjust clutch free travel and/or linkage for all series.
ADD:
A - 6V*1 Engine................................................................................................................... .5 -
B - To Replace Clutch Disc and/or Pressure Plate.............................................................. .3 .3
CYLINDER,CLUTCH ACTUATOR - R&R OR REPLACE K0720 3.5 -

NOTE:For HFV6 Engine
Add:
A - For 4x4 Model................................................................................................................ .8 -
DISC AND/OR PRESSURE PLATE, CLUTCH - REPLACE

POLICY: A, T
(4 x 2) K0800 2.8 2.8
(4 x 4) K0801 3.8 3.8
ADD:
A - To Replace Clutch Fork Shaft and/or Bushings............................................................. .1 .1
B - To Replace Clutch Pilot Bearing for Pick Up Model....................................................... .2 -
C - To Replace Clutch Pilot Bearing for Wagon Model........................................................ .4 -
D - To Replace Flywheel...................................................................................................... .2 .2
E - To Replace Clutch Release Bearing.............................................................................. .2 .2
F - 6V*1 Engine................................................................................................................... .5 -
G - To Replace Clutch Pilot Bearing.................................................................................... - .4
H - HFV6 Engine.................................................................................................................. .8 -
MANUAL TRANSMISSION CONTROLS

CAB STYLE
VIN CODE
NUMBER
TF* UC*
KNOB, TRANSMISSION SHIFT CONTROL LEVER - REPLACE K1000 .2 .2
LEVER, GEARSHIFT CONTROL - REPLACE K1060 .4 .4

POLICY: T
SEAL AND/OR BOOT, FLOOR MOUNTED GEARSHIFT - REPLACE

TRANSMISSION GEARSHIFT K1080 .3 .3
SENSOR, VEHICLE SPEED - REPLACE K2050 .2 .2

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
GEAR AND/OR SEAL SPEEDOMETER DRIVEN - REPLACE K2060 .3 .3

MANUAL TRANSMISSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SEAL, TRANSMISSION EXTENSION REAR OIL - REPLACE K2160 .6 .6

POLICY: P
INC D&C front U-joint and hanger bearing support to frame.
Drain and refill trans. R&R hand brake and yoke flange.
DOES NOT INC R&R trans assy or recondition U-joint.
COVER AND/OR GASKET, TRANSMISSION SHIFT - R&R OR REPLACE K2240 .6 .6

POLICY: P
INC: R&R floor mat, floor access cover, shift linkage and shift cover
and gasket. Clean, inspect and retorque.
DOES NOT INC: Recondition remote control assy.
MOUNT, TRANSMISSION - REPLACE

POLICY: P, T
REAR K2283 .6 .6
6V REAR K2284 .6 -
TRANSMISSION ASSEMBLY - RECONDITION

POLICY: P, T
DOES NOT INC: Recondition trans..
(4 x 2) K2700 2.6 2.6
(4 x 4) K2701 3.6 3.6
ADD:
A - To Recondition Shifter Cover......................................................................................... .4 .4
B - To Replace Main Drive Gear Bearing Retainer and/or Gasket or Seal.......................... .3 .3
C - To Replace Main Drive Gear Bearing............................................................................ 1.9 1.9
INC: The above add condition.
D - To Recondition Main Shaft............................................................................................. 2.5 2.5
E - To Replace Case Extension And Seal........................................................................... .5 .5
F - To Replace Speedometer Drive Gear............................................................................ .5 .5
G - To Replace Case........................................................................................................... 1.2 1.2
H - 6V*1 Engine................................................................................................................... .5 -
I - HFV6 Engine................................................................................................................... .8 -
(CONTINUED)
MANUAL TRANSMISSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
(MUX 4x4) K2709 3.6 3.6
ADD:
A - To Replace Front Oil Seal.............................................................................................. .6 .6
B - To Replace Main & Counter Gear and/or Bearing......................................................... 2.5 2.5
C - To Replace Output Shaft & Bearing and/or Seal........................................................... .9 .9
D - To Replace Front Case.................................................................................................. .6 .6
E - To Replace Rear Case................................................................................................... .9 .9
TRANSMISSION ASSEMBLY - REPLACE

POLICY: A, P, T
INC: Separate Transfer Case Assy.
(4 x 2) K2720 2.7 2.7
(4 x 4) K2721 3.7 3.7
ADD:
A - 6V*1 Engine................................................................................................................... .4 -
B - HFV6 Engine.................................................................................................................. .7 -
AUXILIARY TRANSMISSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
ACTUATOR, TRANSFER 2W/4W SHIFT - REPLACE K4140 .4 .4
SEAL, OIL, ACTUATOR SHAFT - REPLACE K4145 .5 .5
SEAL, TRANSFER CASE OIL - REPLACE

POLICY: P
FRONT K4162 .7 .7
REAR K4163 .6 .6
FRONT INPUT K4164 2.5 2.5
CONTROL UNIT, TRANSFER (2W-4W) - REPLACE K4300 .3 .3

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
CONTROL UNIT, TRANSFER (2W-4W) - CLEAR MEMORY K4305 .4 .4

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
TRANSFER CASE ASSEMBLY - RECONDITION

POLICY: P, T
MAN TRANS K4400 2.1 4.0
ADD:
A - For Wagon Model.......................................................................................................... 1.9 -
B - For AR5 Trans................................................................................................................ 2.9 -
C - MUX Transmission......................................................................................................... .9 .9
AUTO TRANS K4401 4.0 4.0
TRANSFER CASE ASSEMBLY - REPLACE

M/T MUA K4409 1.5 1.5
M/T AR5 K4411 1.7 -
M/T MUX K4408 1.5 1.5
A/T JR405 K4414 1.5 1.5
A/T AW30-40E K4415 1.5 -
A/T 4L60E K4416 1.4 -
AUTOMATIC TRANSMISSION CONTROLS

CAB STYLE
VIN CODE
NUMBER
TF* UC*
INDICATOR PLATE AND/OR ASSEMBLY SHIFT RANGE INDICATOR - REPLACE K5100 .3 .3
SHIFT KNOB - R&R OR REPLACE K5110 .2 .2

POLICY: T
SHIFT LEVER, CONTROL LINKAGE - REPLACE K5170 .3 .3

POLICY: T
SHIFT CABLE, CONTROL - REPLACE K5250 .9 .9

INC: Adjust.
AUTOMATIC TRANSMISSION
CAB STYLE
VIN CODE
NUMBER
TF* UC*
OIL COOLER PIPES, TRANSMISSION - REPAIR OR REPLACE

POLICY: T
INLET K5262 .7 .7
OUTLET K5263 .7 .7
BOTH K5267 .9 .9
ADD:
A - For 4x4 Model................................................................................................................ .3 .3
OIL COOLER HOSES, TRANSMISSION - REPAIR OR REPLACE

POLICY: T
RADIATOR SIDE : BOTH K5287 .3 .3
LEVEL GAUGE (DIPSTICK), TRANSMISSION ATF - REPLACE K6130 .2 .2
FILLER TUBE AND/OR GASKET, TRANSMISSION - REPLACE K6140 .3 .3

POLICY: P
INHIBITOR SWITCH, TRANSMISSION - REPLACE K6275 .3 .3

POLICY: P, T
INC: D&C Shift Arm, Cable-Transmission Side
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
BOLTS, CONVERTER TO FLYWHEEL - REPLACE K6300 1.0 1.0

POLICY: P
ADD:
A - HFV6 Engine ................................................................................................................. 2.0 -
DRIVEN GEAR AND/OR GASKET, SPEEDOMETER - REPLACE K6320 .3 .3

POLICY: P
SENSOR, VEHICLE SPEED - REPLACE K6330 .3 .3

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SENSOR, SPEED, REVOLUTION - REPLACE K6331 .3 .3

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
OIL SEAL, EXTENSION HOUSING FLANGE YOKE - REPLACE K6360 .6 .6

POLICY: P
INC: Drain and refill ATF.
OIL PRESSURE TEST K6400 .5 .5
DRAIN PLUG AND/OR GASKET - R&R OR REPLACE K6490 .2 .2
OIL PAN AND/OR GASKET, TRANSMISSION - R&R OR REPLACE

POLICY: P
TRANSMISSION K6500 .6 .6
ADD:
A - To Replace Oil filter........................................................................................................ .1 .1
B - To Replace Solenoids (One or All) (EXC. Pressure Control Solenoid) (INC. Diagnosis)................. .5 .5
HARNESS AND/OR CONNECTOR, VALVE BODY - REPLACE
SOLENOID, SHIFT LOCK - REPLACE K6508 .5 .5
CONTROLLER, SHIFT LOCK SOLENOID - REPLACE K6509 .6 .6

MAIN CASE K6510 .8 .8
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
TRANSMISSION CONTROL MODULE - R&R OR REPLACE K6517 .2 .2

POLICY: P
ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
B - Program TCM................................................................................................................. .3 .3
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SENSOR, TURBIN SPEED - REPLACE K6520 .3 .3

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
VALVE BODY, TRANSMISSION - R&R OR REPLACE

POLICY: P
INC: K6500 R&R Transmission Oil Pan.
MAIN CASE K6560 .8 .8
ADD:
A - To Replace Separator Plate or Gaskets........................................................................ .6 .6
B - To Replace Solenoids (One or All) (INC. Diagnosis)..................................................... .6 .6
C - To Clean and Recondition Valve Body (Main Case)...................................................... 1.6 1.6
PARKING PAWL SHAFT, ROD OR SPRING - REPLACE K6640 1.1 1.1

POLICY: P
INC: Drain and Refill, R&R Prop Shaft, Center Bearing,
Speedometer Drive Gear and Cable.
ADD:
A - For 4x4 Model................................................................................................................ .9 .9
ATF THERMO SENSOR - REPLACE K6645 .7 .7

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
AUTOMATIC TRANSMISSION ASSEMBLY - REPLACE K7000 2.9 2.9

POLICY: A, P, T
ADD:
A - To Replace Torque Converter........................................................................................ .1 .1
B - To Flush Cooling Line.................................................................................................... .6 .6
C - For 4 x 4 Model.............................................................................................................. .9 .9
D - 6VE1 Engine.................................................................................................................. 1.3 -
E - HFV6 Engine.................................................................................................................. 2.5 -
TORQUE CONVERTER ASSEMBLY - REPLACE K7020 3.0 3.0

POLICY: A, P, T
INC: K7000 R/R Automatic Transmission Assembly.
(CPMTINUED)
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
ADD:
A - For 4 x 4 Model.............................................................................................................. .9 .9
B - 6VE1 Engine.................................................................................................................. 1.3 -
C - HFV6 Engine.................................................................................................................. 2.5 -
CONVERTER HOUSING, TRANSMISSION - REPLACE K7040 3.1 3.1

POLICY: P, T
INC: R&R Torque Converter.
ADD:
A - For 4x4 Model................................................................................................................ .9 .9
B - 6VE1 Engine.................................................................................................................. 1.3 -
SEAL, TRANSMISSION OIL PUMP - REPLACE K7100 3.3 3.3

POLICY: P
ADD:
A - For 4x4 Model................................................................................................................ .9 .9
B - 6VE1 Engine.................................................................................................................. 1.3 -
OIL PUMP AND/OR GASKET, TRANSMISSION - REPLACE K7120 3.2 3.2

POLICY: P, T
INC: K7000 R&R Automatic Transmission Assembly
K7020 R&R Torque Converter
ADD:
A - To Replace Front Oil Pump Seal................................................................................... .1 .1
B - To Recondition Oil Pump............................................................................................... .4 .4
C - For 4x4 Models.............................................................................................................. .9 .9
D - 6VE1 Engine.................................................................................................................. 1.3 -
AUTOMATIC TRANSMISSION ASSEMBLY - RECODITION K7900 7.6 7.6

POLICY: A, P, T
INC: K7000 R&R Automatic Transmission Assembly
K7020 R&R Torque Converter
ADD:
A - For 4x4 Model................................................................................................................ .9 .9
B - 6VE1 Engine.................................................................................................................. 1.3 -
L FUEL AND EXHAUST
L
FUEL AND EXHAUST L - 3
FUEL AND EXHAUST

CAB STYLE
VIN CODE
NUMBER
TF* UC*
PIPES, FUEL - REPLACE

POLICY: T
NOTE: This is a ST (straight time) operation which requires time
RETURN OR FEED LINES, TANK TO ENGINE COMPARTMENT L0120 .5 .5
FUEL TANK AREA PIPES L0160 .5 .5
HOSES, FUEL AND EVAPORATIVE EMISSION CONTROL L0220 .3 .3

(ENGINE COMPARTMENT) - REPLACE
POLICY: T
HOSES, FUEL TANK AREA - REPLACE L0240 .2 .2

POLICY: T
HOSES, FUEL AND EVAPORATIVE EMISSION CONTROL L0260 .7 .7

(FUEL TANK AREA) - REPLACE
POLICY: T
CANISTER, FUEL VAPOR - REPLACE

GASOLINE L0621 .3 -
BRACKET, FUEL SEDIMENTER - REPLACE L0700 .4 .4
SEDIMENTER ASSEMBLY, FUEL - REPLACE L0740 .3 .3
SENSOR ASSEMBLY, SEDIMENTOR - REPLACE L0748 .4 .4
CAP, FUEL TANK - REPLACE L1020 .2 .2
NECK, PIPE, FUEL TANK FILLER - REPLACE L1065 .5 .5
NECK, HOSE AND/OR VENT HOSE, FUEL TANK FILLER - REPLACE

REAR TANK L1068 .4 .5
ADD:
A - For Wagon Model.......................................................................................................... .1 -
L - 4 FUEL AND EXHAUST
FUEL AND EXHAUST

CAB STYLE
VIN CODE
NUMBER
TF* UC*
GAUGE UNIT ASSEMBLY, FUEL TANK - REPLACE L1228 .8 .9

ADD:
A - EXC. 4JJ1/4JK1 Engine................................................................................................. .3 -
B - For Wagon Model.......................................................................................................... .1 -
TANK, FUEL - REPLACE L1280 .8 .9

INC: Drain and refill tank. Transfer gage and filler neck as nec.
ADD:
A - EXC. 4JJ1/4JK1 Engine................................................................................................. .3 -
B - For Wagon Model.......................................................................................................... .1 -
HANGER AND/OR CLAMP, EXHAUST SYSTEM - REPLACE L2020 .3 .3

ADD:
A - To Replace Additional Hanger and/or Clamp................................................................. .1 .1
B - To Replace Two Additional Hanger and/or Clamp......................................................... .2 .2
SEAL, EXHAUST PIPE - REPLACE L2040 .4 .4

POLICY: E
ADD:
A - With Skid Plate............................................................................................................... .2 .2
B - 6V*1 Engine................................................................................................................... .3 -
PIPE, RIGHT - FRONT EXHAUST - REPLACE L2100 1.1 -

POLICY: E
PIPE, LEFT - FRONT EXHAUST - REPLACE L2101 1.0 -

POLICY: E
PIPE, FRONT EXHAUST - REPLACE

POLICY: E
L2160 .4 .4
ADD:
A - C24*E Engine................................................................................................................. .3 -
(CONTINUED)
FUEL AND EXHAUST L - 5
FUEL AND EXHAUST

CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
DUAL RIGHT L2162 .7 -
ADD:
A - For 4x4 Model................................................................................................................ .2 -
DUAL LEFT L2163 1.0 -
PIPE, CENTER EXHAUST - REPLACE L2200 .5 .5

ADD:
A - For HFV6 Engine........................................................................................................... .1 -
HEAT SHIELD, EXHAUST CATALYTIC CONVERTER - REPLACE L2280 .3 .3
CONVERTER, EXHAUST CATALYTIC - REPLACE

POLICY: E, T
INC: Check System for Leaks.
L2300 .3 1.1
ADD:
A - EXC. 4JJ1/4JK1/6V*1 Engine........................................................................................ .3 -
B - 4JJ1/4JK1 Engine.......................................................................................................... .8 -
PIPE, INTERMEDIATE EXHAUST - REPLACE L2420 .4 .4
MUFFLER - REPLACE L2584 .4 .4

INC: Check system for leaks.
EXHAUST SYSTEM (COMPLETE) - REPLACE L2904 .6 .6

POLICY: A
INC: Replace hangers, brackets or clamps as nec.
ADD:
A - 6V*1 Engine................................................................................................................... .4 -
B - HFV6 Engine.................................................................................................................. .7 -
N ELECTRICAL
N
ELECTRICAL N - 13
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
BATTERY - REPLACE
POLICY: A, T
ONE N0110 .2 .2
ADD:
A - Diagnosis Time.............................................................................................................. .2 .2
CABLES, BATTERY - REPLACE

POLICY: T
POSITIVE N0120 .3 .3
ADD:
A - HFV6 Engine.................................................................................................................. .6 -
NEGATIVE N0126 .3 .3
RETAINER AND/OR BOLTS, BATTERY - REPLACE N0150 .2 .3
TRAY OR SUPPORT, BATTERY - REPLACE N0160 .2 .2
HORN ASSEMBLY - REPLACE

HIGH NOTE N0200 .2 .2
LOW NOTE N0201 .2 .2
HEADLAMP ASSEMBLY - REPLACE

INC: Aim headlamps.
ONE N0250 .6 .6
BOTH N0252 .8 .8
HEADLAMP HOUSING - REPLACE

INC: Aim headlamps.
ONE N0260 .6 .6
BOTH N0261 1.0 1.0
HEADLAMP - AIM
ONE N0265 .3 .3
BOTH N0266 .3 .3
N - 14 ELECTRICAL
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
STARTER, DISCHARGE, HEAD LAMP - REPLACE

INC: Aim headlamps.
RIGHT N0270 .6 -
LEFT N0271 .6 -
ACTUATOR, HEADLIGHT LEVELING - REPLACE

RIGHT N0281 .6 -
LEFT N0282 .6 -
TURN SIGNAL LAMP, OUT SIDE MIRROR - REPLACE

RIGHT N0320 .2 .2
LEFT N0321 .2 .2
BULBS, LAMP - REPLACE

NOTE: Per ONE LAMP HOUSING
: NAMES of LAMP; HOUSINGS; BULBS
BACK UP; RH; ONE N0415 .2 .2
BACK UP; LH; ONE N0416 .2 .2
BACK UP; BOTH; TWO N0417 .3 .3
HEAD; RH; ONE OR ALL N0442 .3 .6
ADD:
A - For Wagon Model (N0442 Only).................................................................................... .3 -
HEAD; LH; ONE OR ALL N0443 .3 .6
ADD:
A - For Wagon Model(N0443 Only)..................................................................................... .3 -
HEAD; BOTH; TWO OR ALL N0444 .4 .9
ADD:
DOME; ONE; ONE N0507 .2 .2
INSTRUMENT PANEL WARNING; ONE; ONE OR ALL N0647 .2 .2
LICENSE; ONE; ONE N0657 .2 .2
LICENSE; TWO; TWO N0658 .2 .2
PARK AND TURN SIGNAL; RH; ONE OR ALL N0685 .3 .5
ADD:
(CONTINUED)
ELECTRICAL N - 15
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
PARK AND TURN SIGNAL; LH; ONE OR ALL N0686 .3 .5
ADD:
PARK AND TURN SIGNAL; BOTH; TWO OR ALL N0687 .4 .7
ADD:
POSITION INDICATOR; ONE; ONE N0725 .3 .3
SIDE MARKER, FRONT; RH; ONE N0736 .2 .2
SIDE MARKER, FRONT; LH; ONE N0737 .2 .2
STOP, TAIL AND TURN SIGNAL; RH; ONE OR ALL N0765 .2 .2
ADD:
A - For Pick Up Model (N0765 Only)................................................................................... .1 -
STOP, TAIL AND TURN SIGNAL; LH; ONE OR ALL N0766 .2 .2
ADD:
A - For Pick Up Model(N0766 Only).................................................................................... .1 -
STOP, TAIL AND TURN SIGNAL; BOTH; TWO OR ALL N0767 .3 .3
ADD:
HIGH MOUNTED STOP; ONE; ONE N0769 .2 .3
ADD:
MAP; RH; ONE N0824 .2 .2
MAP; LH; ONE N0825 .2 .2
FOG; RH; ONE N0852 .3 .4
ADD:
FOG; LH; ONE N0853 .3 .4
ADD:
FOG; BOTH; TWO N0854 .4 .5
ADD:
LUGGAGE COMPARTMENT; ONE; ONE N0855 .2 .2
REAR FOG LIGHT; LEFT N0884 .2 .2
N - 16 ELECTRICAL
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
LENS AND/OR GASKET, LAMP - REPLACE

NOTE: Per ONE LAMP HOUSING
: NAMES of LAMP; HOUSINGS; LENSES
LUGGAGE COMPARTMENT; ONE; ONE N1145 .2 .2
DOME; ONE; ONE N1156 .2 .2
LICENSE; ONE; ONE N1176 .2 .2
LICENSE; TWO; TWO N1177 .2 .2
STOP, TAIL AND TURN SIGNAL; RH; ONE N1224 .2 .2
ADD:
A - For Pick Up Model (N1224 Only)................................................................................... .1 .1
STOP, TAIL AND TURN SIGNAL; LH; ONE N1225 .2 .2
ADD:
A - For Pick Up Model(N1225 Only).................................................................................... .1 .1
STOP, TAIL AND TURN SIGNAL; BOTH; TWO N1226 .3 .3
ADD:
A - For Pick Up Model(N1226 Only).................................................................................... .1 .1
HIGH MOUNTED STOP; ONE; ONE N1289 .2 .2
ADD:
A - For Wagon Model (N1289 Only).................................................................................... .1 .1
MAP; RH; ONE N1314 .2 .2
MAP; LH; ONE N1315 .2 .2
MAP; BOTH; TWO N1316 .2 .2
LAMP ASSEMBLY - REPLACE

LUGGAGE COMPARTMENT N1445 .2 .2
DOME; ONE OR ALL N1456 .2 .2
FOG; RIGHT N1466 .3 .4
ADD:
FOG; LEFT N1467 .3 .4
ADD:
REAR FOG LIGHT; RIGHT N1473 .2 .2
LICENSE; ONE OR BOTH N1477 .2 .2
(CONTINUED)
ELECTRICAL N - 17
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
PARK AND TURN SIGNAL; RIGHT N1520 .5 .5
PARK AND TURN SIGNAL; LEFT N1521 .5 .5
REAR COMBINATION; RIGHT N1524 .2 .2
ADD:
REAR COMBINATION; LEFT N1525 .2 .2
ADD:
MAP; ONE OR ALL N1597 .2 .2
HIGH MOUNTED STOP N1599 .2 .3
ADD:
FUSE, FUSIBLE LINK - REPLACE N1720 .2 .2

INC: One or more.
FLASHER UNIT - REPLACE N1750 .2 .2
SWITCH - REPLACE
INC: Replace fuse where nec.
NOTE: Switch or sending unit.
BACK-UP LIGHT N2030 .3 .3
TRANSFER INDICATOR N2032 .3 .3
HI-LOW NEUTRAL N2033 .3 .3
DOOR LOCK N2114 .2 .2
POWER WINDOW; FRONT RIGHT N2144 .2 .2
POWER WINDOW; FRONT LEFT N2145 .2 .2
POWER WINDOW; REAR RIGHT N2154 .2 .2
POWER WINDOW; REAR LEFT N2155 .2 .2
DOOR JAMB; RIGHT FRONT N2174 .2 .2
DOOR JAMB; LEFT FRONT N2175 .2 .2
DOOR JAMB; RIGHT REAR N2184 .2 .2
DOOR JAMB; LEFT REAR N2185 .2 .2
(CONTINUED)
N - 18 ELECTRICAL
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
ENGINE OIL PRESSURE N2220 .3 .3
ADD:
A - HFV6 Engine(N2220 Only)............................................................................................. .2 -
ENGINE COOLANT TEMPERATURE N2230 .2 .2
ADD:
4WD (FOUR WHEEL DRIVE) N2240 .2 .2
ADD:
REAR WIPER/WASHER N2242 .2 .2
REAR DEFOGGER N2243 .3 .5
ADD:
FOG LAMP N2244 .7 .7
POWER MIRROR N2245 .2 .2
HAZARD WARNING N2247 .3 .3
REAR FOG LAMP N2248 .2 .2
REAR A/C MAIN N2249 .2 .2
LIGHTING N2290 .7 .7
HEADLIGHT DIMMER (COMBINATION) N2310 .7 .7
HEADLIGHT LVELING N2315 .2 .2
ADD:
IGNITION N2320 .4 .4
NEUTRAL; A/T N2323 .3 .3
POWER/3RD START N2325 .3 .3
VACUUM N2345 .3 .3
NEUTRAL; M/T N2360 .3 .3
NEUTRAL; T/F N2365 .3 .3
PARKING BRAKE LIGHT N2380 .3 .3
PARKING BRAKE LIGHT (STICK TYPE) N2381 2.1 -
STOP LIGHT N2440 .2 .2
TURN SIGNAL (COMBINATION) N2530 .7 .7
WINDSHIELD WIPER/WASHER (COMBINATION) N2610 .7 .7
4x4 INDICATOR LIGHT N2778 .3 .3
ELECTRICAL N - 19
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
RELAY - REPLACE
INC: Replace fuse where nec.
ENGINE MAIN (ECM) N2800 .2 .2
STARTER N2810 .2 .2
HEAD LIGHT N2820 .2 .2
TAIL LIGHT N2830 .2 .2
DIMMER N2850 .2 .2
FOG LAMP N2856 .2 .2
REAR FOG N2857 .2 .2
HORN N2880 .2 .2
WIPER N2900 .2 -
A/C COMPRESSOR N2910 .2 .2
A/C CONDENSOR N2912 .2 .2
HAZARD/TURN SIGNAL N2920 .3 .3
GLOW PLUG N2922 .2 .2
ACCESSORY SOCKET N2930 .2 .2
HEATER N2932 .2 .2
HAZARD RIGHT N2933 .2 .2
HAZARD LEFT N2934 .2 .2
THERMO (A/C) N2937 .2 .2
FUEL PUMP N2960 .2 .2
POWER WINDOW N2980 .2 .2
MOTOR - REPLACE
POWER WINDOW; FRONT RIGHT N3310 .5 .6
ADD:
A - For Wagon Model.......................................................................................................... .1 -
POWER WINDOW; FRONT LEFT N3311 .5 .6
ADD:
A - For Wagon Model.......................................................................................................... .1 -
POWER WINDOW; REAR RIGHT N3312 .4 .4
ADD:
POWER WINDOW; REAR LEFT N3313 .4 .4
(CONTINUED)
N - 20 ELECTRICAL
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
ADD:
ACTUATOR ASSY, DOOR LOCK - R&R OR REPLACE

FRONT RIGHT N3314 .5 .5
ADD:
FRONT LEFT N3315 .5 .5
ADD:
REAR RIGHT N3324 .4 .4
ADD:
REAR LEFT N3325 .4 .4
ADD:
BACK DOOR N3327 .3 .3
MOTOR, WIPER - R&R

INC: Replace fuse where necessary.
WINDSHIELD N3510 .2 .2
BACK GLASS N3511 .3 .3
MOTOR, WIPER - REPLACE

BLADE, WIPER - REPLACE

ARM, WIPER - REPLACE

INC: One or both.
ELECTRICAL N - 21
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
LINK, WINDSHIELD WIPER OPERATING - REPLACE

RIGHT N3630 .5 .5
LEFT N3631 .5 .5
BOTH N3637 .6 .6
HOSES, NOZZLES, WASHER AND/OR WIPER STOPS - REPLACE

INC: One or all.
CONTAINER AND COVER, WASHER - REPLACE

WINDSHIELD N3750 .7 1.0
ADD:
A - For Wagon Model.......................................................................................................... .3 -
BACK GLASS N3751 1.0 1.0
PUMP ASSEMBLY, WASHER - R&R OR REPLACE

INC: One or both
ADD:
A - For Wagon Model.......................................................................................................... .2 -
LIGHTER ASSEMBLY, CIGARETTE - REPLACE N4010 .4 .4
SOCKET, ACCESSORY - REPLACE

FRONT CONSOLE N4015 .3 .3
LUGGAGE ROOM N4018 .2 .2
LENS AND/OR BEZEL, INSTRUMENT CLUSTER - REPLACE N4120 .4 .4
CLOCK ASSEMBLY - R&R N4200 .2 .2
CLOCK ASSEMBLY - REPLACE N4210 .2 .2
SPEEDOMETER - REPLACE N4310 .4 .4

N - 22 ELECTRICAL
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
TACHOMETER - R&R N4500 .4 .4
METER BOARD ASSEMBLY - REPLACE N4410 .2 .2
TACHOMETER - REPLACE N4510 .4 .4
GAUGE - REPLACE
INC: R&R instrument cluster nec.
ENGINE COOLANT TEMPERATURE N4640 .4 .4
FUEL N4680 .4 .4
CIRCUIT, PRINTED - R&R OR REPLACE

INSTRUMENT CLUSTER N5140 .4 .4
COIL ASSEMBLY, SRS (AIR BAG) - REPLACE N5810 .7 .7

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
SRS - AIR BAG - REPLACE

POLICY: A
DRIVER N5820 .2 .2
PASSENGER N5821 .6 .6
ADD:
B - Diagnosis Time.............................................................................................................. .3 .3
SENDING AND DIAGNOSTIC MODULE (SRS) - REPLACE N5830 .3 .5

ADD:
A - For Wagon Model.......................................................................................................... .2 -
B - Diagnosis Time.............................................................................................................. .3 .3
CONTROL UNIT, ALARMER - REPLACE N5840 .2 .3

ADD:
A - For Wagon Model.......................................................................................................... .1 -
CONTROL UNIT, REAR FOG LAMP - REPLACE N5850 .2 .2

ELECTRICAL N - 23
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
G-SENSOR - REPLACE N5900 .6 .6

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
CONTROL MODULE,PIM (POWER TRAIN INTERFACE MODULE) - REPLACE N5920 .3 -

ADD:
A - Diagnosis Time.............................................................................................................. .3 .3
WIRING AND/OR CONNECTOR - REPAIR

NOTE: This is a ST (straight time) operation which requires time
INC: Connect and use diagnostic equipment to locate problem,
R&R any necessary components and replace fuse if necessary.
AIR CONDITIONING N6030 .5 .5
BACK GLASS WIPER MOTOR N6065 .5 .5
CAB MAIN N6070 .5 .5
CHASSIS; FRONT N6112 .5 .5
CHASSIS; REAR N6113 .5 .5
DOME; LIGHT N6180 .5 .5
DOOR LOCK; RIGHT FRONT N6224 .5 .5
DOOR LOCK; LEFT FRONT N6225 .5 .5
DOOR LOCK; RIGHT REAR N6234 .5 .5
DOOR LOCK; LEFT REAR N6235 .5 .5
DOOR LOCK; BACK DOOR N6238 .5 .5
DOOR WINDOW; RIGHT FRONT N6254 .5 .5
DOOR WINDOW; LEFT FRONT N6255 .5 .5
DOOR WINDOW; RIGHT REAR N6264 .5 .5
DOOR WINDOW; LEFT REAR N6265 .5 .5
ENGINE N6270 .5 .5
HEADLIGHT N6290 .5 .5
HEATER N6310 .5 .5
INSTRUMENT PANEL N6360 .5 .5
REAR BODY N6398 .5 .5
REAR WINDOW DEFOGGER N6440 .5 .5
N - 24 ELECTRICAL
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
HARNESS, WIRING - REPLACE

HARNESS, FUEL INJECTOR (HFV6 Engine only) N6985 .3 -
INSTRUMENT PANEL N7060 1.6 1.9
ADD:
B - Diagnosis Time.............................................................................................................. .5 .5
ENGINE N7063 1.0 3.0
ADD:
A - With A/C (N7063 Only)................................................................................................... .1 .1
B - 4JH1-T Engine (N7063 Only)......................................................................................... 1.4 -
C - For 4x4 Model (N7063 Only).......................................................................................... .2 .2
D - 4JJ1/4JK1 Engine (N7063 Only).................................................................................... 2.0 -
E - HFV6 Engine (N7063 Only)............................................................................................ .6 -
F - Intercooler of upside installation type(4JJ* Engine)....................................................... .3 .3
DOOR; RIGHT FRONT N7066 .9 1.0
ADD:
DOOR; LEFT FRONT N7067 .9 1.0
ADD:
DOOR; RIGHT REAR N7068 .6 .6
ADD:
DOOR; LEFT REAR N7069 .6 .6
ADD:
BATTERY TO STARTER N7073 .9 .9
ENGINE ROOM N7080 4.0 7.2
ADD:
A - For Parking Brake T-Handle and Bench Seat Type (N7080 Only)................................. .3 -
B - 4JJ1/4JK1 Engine (N7080 Only).................................................................................... 3.2 -
REAR BODY N7081 1.7 1.7
REAR WINDOW GLASS WIPER MOTOR N7082 .3 .3
DOOR LOCK, BACK DOOR N7083 .3 .3
ROOF N7084 2.0 2.0
TRANSFER N7093 1.0 -
(CONTINUED)
ELECTRICAL N - 25
ELECTRICAL
CAB STYLE
VIN CODE
NUMBER
TF* UC*
(CONT'D)
HIGH MOUNT STOP LAMP N7097 .9 .9
R ACCESSORIES
R
R – 2 ACCESSORIES
ACCESSORIES R – 3
R - 4 ACCESSORIES
ACCESSORIES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
STANDING WAVE RATIO SWR - ADJUST R0120 .4 -
ANTENNA COMPONENTS - REPLACE R0220 .4 .4
RADIO RECEIVER - R&R R0750 .3 -

ADD:
A - For Wagon Model.......................................................................................................... .1 -
CASSETTE DECK - R&R R0751 .3 -

ADD:
A - For Wagon Model.......................................................................................................... .1 -
RADIO RECEIVER - REPLACE R0760 .3 -

ADD:
A - For Wagon Model.......................................................................................................... .1 -
CASSETTE DECK - REPLACE R0761 .3 -

ADD:
A - For Wagon Model.......................................................................................................... .1 -
GRILLE, RADIO SPEAKER - R&R OR REPLACE

REAR RIGHT R0920 .2 .2
REAR LEFT R0921 .2 .2
SPEAKER, RADIO - REPLACE

FRONT RIGHT R0940 .2 .2
ADD:
FRONT LEFT R0941 .2 .2
ADD:
REAR RIGHT R0950 .2 .2
REAR LEFT R0951 .2 .2
ACCESSORIES R - 5
ACCESSORIES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
TWEETER, DOOR SPEAKER - R&R OR REPLACE

FRONT RIGHT R0980 .3 .3
FRONT LEFT R0981 .3 .3
CHAIN, CABLE OR ROD, CRUISE CONTROL POWER TO CARBURETOR - REPLACE R1180 .2 -

ADD:
A - To Adjust Cable.............................................................................................................. .2 -
SERVO OR ACTUATOR ASSEMBLY, CRUISE CONTROL - REPLACE R1190 .4 -
MODULE, CRUISE CONTROL - REPLACE R1220 .4 -
CONTROL UNIT, IMMOBILIZER - REPLACE R1230 .4 .6

ADD:
A - For Wagon Model.......................................................................................................... .2 -
CONTROL UNIT (WITH ANTENNA), IMOBILIZER - REPLACE R1231 .6 .6

INC.Diagnosis Time & Reprograming
ANTENNA, IMMOBILIZER (IGNITION LOCK) - REPLACE R1235 .3 .3
ANTENNA, KEYLESSENTRY - REPLACE R1236 .3 .3
SWITCH, CRUISE CONTROL RELEASE - R&R OR REPLACE

BRAKE R1240 .3 -
SWITCH, CRUISE CONTROL ENGAGEMENT - REPLACE R1260 .7 -
DEFLECTOR, TAILGATE WIND - REPLACE R2400 .3 .3
GLASS; MIRROR, OUTSIDE REAR VIEW - REPLACE

MANUAL; RIGHT R3260 .2 -
MANUAL; LEFT R3261 .2 -
ELECTRIC REMOTE CONTROL; RIGHT R3290 .2 .2
ELECTRIC REMOTE CONTROL; LEFT R3291 .2 .2
R - 6 ACCESSORIES
ACCESSORIES
CAB STYLE
VIN CODE
NUMBER
TF* UC*
SWITCH, REMOTE CONTROL MIRROR - REPLACE R3318 .2 .2
MIRROR COMPONENTS, OUTSIDE REAR VIEW - REPLACE

MANUAL; RIGHT R3390 .2 -
MANUAL; LEFT R3391 .2 -
ELECTRIC REMOTE CONTROL; RIGHT R3395 .2 .2
ELECTRIC REMOTE CONTROL; LEFT R3396 .2 .2
CONTROL UNIT, ANTI-THEFT - REPLACE R9000 .4 .4
HORN ASSEMBLY, ANTI-THEFT - REPLACE R9010 .2 .2
SWITCH, ANTI-THEFT ENGINE HOOD - REPLACE R9040 .2 .2
KEYLESS ENTRY SYSTEM

(INC. REPROGRAM)
CONTROL UNIT; KEYLESSENTRY - REPLACE R9049 .4 .4
CONTROL UNIT, ANTI-THEFT & KEYLESSENTRY - REPLACE R9050 .4 .4
(INC. REPROGRAM)
BATTERY; DOOR LOCK REMOTE CONTROL - CHANGE R9056 .2 .2
S NON WARRANTY (PANEL REPLACEMENT)
S
S - 4 NON WARRANTY (PANEL REPLACEMENTS)
PANEL REPLACEMENTS
CAB STYLE
VIN CODE
NUMBER
TF* UC*
PANEL HOOD - REPLACE S0150 .4 .4
FENDER, FRONT - REPLACE

RIGHT S0280 .5 .5
LEFT S0281 .5 .5
ADD:
A - With Molding (Each)....................................................................................................... .1 .1
COWL COVER - REPLACE S0350 .2 .2
DOOR ASSEMBLY, FRONT - REPLACE

INC: R&R trim, glass and hardware.
RIGHT S0850 1.9 1.9
LEFT S0851 1.9 1.9
DOOR ASSEMBLY, REAR - REPLACE

INC: R&R trim, glass and hardware.
RIGHT S0950 1.4 1.4
LEFT S0951 1.4 1.4
DOOR ASSEMBLY, BACK (SINGLE DOOR TYPE) - REPLACE S1856 1.6 1.6
INC: R&R trim and hardware.
NON WARRANTY (PANEL REPLACEMENTS) S - 5
CORROSION PERFORATION REPAIRS

CAB STYLE
VIN CODE
NUMBER
TF* UC*
THE FOLLOWING OPERATIONS SHOULD BE USED TO IDENTIFY

REPAIRS ON RUST THROUGH PERFORATION DAMAGE
THE TIME ALLOWANCES SHOWN INCLUDE ALL METAL
AND PAINT WORK NECESSARY TO COMPLETE THE REPAIR.
RADIATOR SUPPORT AND/OR TIE BAR - CORROSION PERFORATION REPAIR S5050 1.5 1.5
PANEL HOOD - CORROSION PERFORATION REPAIR S5070 1.5 1.5
FENDER - CORROSION PERFORATION REPAIR S5090 1.5 1.5
PANEL MOTOR COMPARTMENT SIDE AND WHEELHOUSE INCLUDING S5110 1.5 1.5
STRUT TOWER - CORROSION PERFORATION REPAIR
COWL AND/OR VENT GRILLE - CORROSION PERFORATION REPAIR S5130 1.5 1.5
PILLAR, WINDSHIELD - CORROSION PERFORATION REPAIR S5150 1.5 1.5
PANEL ROOF - CORROSION PERFORATION REPAIR S5170 1.5 1.5
PILLAR, CENTER - CORROSION PERFORATION REPAIR S5190 1.5 1.5
PANEL ROCKER - CORROSION PERFORATION REPAIR S5210 1.5 1.5
PANEL FLOOR - CORROSION PERFORATION REPAIR S5230 1.5 1.5
DOOR - CORROSION PERFORATION REPAIR S5250 1.5 1.5
PANEL CAB REAR - CORROSION PERFORATION REPAIR S5310 1.5 -
PANEL QUARTER - CORROSION PERFORATION REPAIR S5350 1.5 1.5
PANEL PICKUP BOX - CORROSION PERFORATION REPAIR S5410 1.5 -

S - 6 NON WARRANTY (PANEL REPLACEMENTS)
CORROSION PERFORATION REPAIRS

CAB STYLE
VIN CODE
NUMBER
TF* UC*
PANEL REAR END - CORROSION PERFORATION REPAIR S5430 1.5 -
LID. GATE OR MATCH REAR COMPARTMENT - CORROSION PERFORATION REPAIR S5450 1.5 1.5
BODY OPENING - CORROSION PERFORATION REPAIR

WINDSHIELD S5500 1.5 1.5
DOORS S5520 1.5 1.5
QUARTER GLASS S5550 1.5 1.5
BACK GLASS S5570 1.5 1.5

LTG (Luv D-Max)

Uploaded by

Copyright:

Available Formats

LTG (Luv D-Max)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LTG (Luv D-Max)

Uploaded by

Copyright:

Available Formats

LIGHT DUTY VEHICLE

(TF* & UC* - NEW CAB MODEL)

ISUZU MOTORS LIMITED

Publication No. L1G-LE-0375

This Labor Time Guide is designed for more POLICY CODES

MAJOR OPERATIONS allowable on that component. These notations,

“Repair diagnosis” time is included in all

The Engine Code designation from the Ve-

A/C Air Conditioning EXC Except

IS REQUESTED BECAUSE: SERVICE MGR. SIGNATURE:

A New Labor Operation description is recommended DISTRIBUTOR USE ONLY

STEP DESCRIPTION OF BASIC STEPS TIME

VIN # Engine Family Trans #

Rear Axle # Body Type Special Equip.

PANEL, SHROUD UPPER AND/OR VENT GRILLE

WHEEL OPENING EXTENSION, FRONT

FENDER, FRONT COMPLETE

FRAME, FRONT DOOR WINDOW

PANEL, CAB BACK

FRAME, REAR DOOR WINDOW

WHEEL OPENING EXTENSION, REAR

BUMPER AND FRONT END

BUMPER ASSEMBLY, FRONT - REPLACE B0048 .4 .4

BAR, FRONT BUMPER FACE - REPLACE B0210 .4 .4

REINFORCEMENT ASSEMBLY, FRONT BUMPER - REPLACE B0215 .4 .4

BAR, IMPACT, FRONT - REPLACE B0230 .4 .4

BUMPER ASSEMBLY, FRONT - ALIGN B0260 .2 .2

BAR, REAR BUMPER FACE - REPLACE B0800 .4 .4

SHEET, NONSLIP, REAR BUMPER - REPLACE B0850 .6 -

BUMPER ASSEMBLY, REAR - ALIGN B0860 .5 .5

BUMPER AND/OR STEP ASSEMBLY, REAR - REPLACE B0880 .4 .4

REINFORCEMENT ASSEMBLY, REAR BUMPER - REPLACE B0890 .4 .4

SIDE GUARD, BUMPER, REAR - REPLACE

GRILLE ASSEMBLY - REPLACE

HOOD ASSEMBLY, ENGINE - R&R OR REPLACE B1490 .3 .3

HOOD ASSEMBLY - ALIGN B1500 .3 .3

BUMPER AND FRONT END

INSULATION, ENGINE HOOD - REPLACE B1510 .3 .3

LATCH, HOOD - R&R OR REPLACE B1540 .4 .4

SUPPORT, HOOD LATCH - REPLACE B1550 .4 .4

ROD, HOOD SUPPORT - REPLACE B1600 .2 .2

CABLE, HOOD LATCH - R&R OR REPLACE B1630 .6 .6

BUMPERS, HOOD - REPLACE B1650 .2 .2

HINGE, HOOD - REPLACE

SKIRT, FRONT FENDER INNER - REPLACE

FENDER, FRONT - R&R OR REPLACE

FENDER, FRONT - ALIGN

BUMPER AND FRONT END

WHEEL OPENING EXTENSION, FRONT - REPLACE

SKIRT, REAR FENDER INNER - REPLACE

CROSSMEMBER, TRANSMISSION MOUNTING - R&R OR REPLACE B1932 .5 .5

STEP ASSEMBLY, BODY SIDE - REPLACE

DOORS AND REAR COMPARTMENT

DOOR ASSEMBLY, FRONT - ALIGN

DOOR ASSEMBLY, FRONT - R&R

HINGE, FRONT DOOR (BOLT ON) - REPLACE

CHECK ASSEMBLY, FRONT DOOR - REPLACE

HANDLE, FRONT DOOR OUTSIDE - REPLACE