Tool PDF
Tool PDF
Tool PDF
ENGAGING TOOLS
FOR CONSTRUCTION
4 WEAR PROTECTION
7 Chocky Bars
7 Wear Buttons
7 Roll Bars
7 Wear Lug
7 Bolt Saver
7 Mechanically Attached Wear Protection (MAWPS)
7 Wear Blocks
7 Tungsten Sidebars
7 Manganese Wear Bar
7 Manganese Wear Block
8 DOZERS
13 Cutting Edge & Blade Protection
78 MOTOR GRADERS
80 Cutting Edges
80 End Bit System
80 Ripper-Scarifier System
94 HYDRAULIC EXCAVATORS
96 CapSure J Tip and Adapter System
96 K Series Tip and Adapter System
96 Sidebar Protection
2
1
2
Contact Information
Regional wear parts experts exist to help you enter into, and grow the Ground Engaging
Tools (GET) business.
Field Support
Africa / Bram van der Meij Van_der_Meij_Bram@Cat.com
Europe
Marketing Support
Worldwide Eric Mathewson Mathewson_Eric_A@Cat.com
G.E.T contact
3
Wear Protection
MOTORGRADERS
4
Cat® Wear Protection Options
Chocky Bars
Cat Chocky Bars are now offered in 6 widths. The new 1.00” Cat Chocky Bar fits even narrower
surfaces. All Chocky Bars contain a “V-groove” design that allows for these items to be bent around
a radius (i.e. side bucket profiles) or separated to change the length requirement needed.
Wear Buttons
Cat Wear Buttons have been designed for use in applications that lend themselves to optimizing
their round profile, or where the round design is needed to cover a specific surface area. The new
Cat “Tear Drop” Wear Button fits in with the existing line of circular Wear Buttons. The tear drop
shape can extend into corners or follow natural tapers on the protected surface. All Wear Buttons
utilizes a “tri-bar” design which traps fine media between three raised bars. The trapped media will
provide material-on-material wear, prolonging the life of the product.
Roll Bars
Cat Roll Bars are a unique product designed to protect the sidebar and heel area of earth moving
machinery such as dozers, loaders and mining shovels. The new 5” Roll Bar now allows protection
on even larger plates. Roll Bars offer impact deflection, penetration, and can be used as weight
reduction in place of heavier castings. Their round profile is designed to provide maximum wear
protection while minimizing drag as the sidebar proceeds through the media.
Wear Lug
The Cat Wear Lug is a laminated wear part designed for the use on earth moving
equipment in the sidebar and leading edge of the bucket. The profile shape of the top of the Wear
Lug allows this product to be utilized in TTT applications for further traction on track shoes.
Bolt Saver
The Cat Bolt Saver is a circular laminated wear part designed with a hole in the middle
to surround and protect bolt heads. It is also large enough to be placed around ¾”
CapSureTM locks as a high abrasion protector.
5
Cat® Wear Protection Options
Wear Blocks
Cat Wear Blocks are used in areas where a single piece needs to cover a large or specific surface area. There are several
new Wear Blocks in the portfolio that give more flexibility and options for coverage.
Standard Cat 6x8” Wear Blocks are versatile and long lasting.
The smaller Cat 3x4” Wear Patch Blocks can be plug welded in tight areas. They can also be
grouped together where no gaps are desired between parts.
The new Cat 11” Trapezoidal Wear Blocks can fill a tapered area or be staggered in a pattern to
avoid straight-line channels.
Cat 4x8.5” Skid Wear Blocks are rectangular shaped and perimeter welded in place.
The Cat Bi-Metallic Wear Blocks use a unique mechanical bonding process for the highest impact
applications. The mild steel jacket and fingers create a strong bond to the chrome white iron.
Tungsten Sidebars
The Cat Tungsten Sidebars are designed to be installed on the bucket wings of any HMS, ERS, or
LHEX bucket. These are an alternative method of protection over OEM cast wing shroud systems.
The Tungsten carbide Sidebars strengthen the bucket sidewall and provide a shadowing effect that
can protect the sidewall from wear. Each sidebar is made from steel round bar and welded with PTA
over 180° of the surface creating a wear face while leaving the back surface for welding to the
bucket.
6
Cat® Wear Protection
Bolt Saver
Part Number Description Length (mm) Width (mm) Thickness (mm) Notes
8
9
Cat® D3-D5 GET Options
Level Cut / Finish (Factory First Fit)
A.R.M. • Recommended for finish and semi-finish dozing
OPTION
AVAILABLE
• Matches cutting edge’s depth of cut
• Low-impact, low abrasion materials only
10
PRECISION CUTTING EDGES FOR D3-D5 DOZERS
DATA SHEET
12
D3 XL Blades
Blade 6EH, 15W, 86U, 8SU, 1GP, 2JP
Ser. Number 9RH, 5LH
Applies to:
D3B, D3C, D3G
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Performance 480-8939 3 RH
19 21 472-4114 2 6
End Bits 480-8940 3 LH GP: 522-3995
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
183-9073 1
Repair Support
D3 XL Blades
Applies to:
D3K, D3K2
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Specialty
Performance 480-8939 3 RH
19 21 472-4116 2 6
End Bits 480-8940 3 LH GP: 522-3996
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
255-1408 1
Repair Support
1
Traditional Design
D3 LGP Blades
Blade 96X, 5WH, 8JP
Ser. Number
Applies to:
D3B, D3C, D3G, D3K, D3K2
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
255-1376 1
Repair Support
Type
Hardware
Hardware
Quantity
Position
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
255-1500 1
Repair Support
1
Traditional Design
D4 XL Blades
Blade 9SH
Ser. Number
Applies to:
D4C, D4G
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Performance End 480-8939 3 RH
19 21 472-4117 2 6
Bits 480-8940 3 LH GP: 522-3999
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
178-9322 1
Repair Support
D4 XL Blades
Applies to:
D4K, D4K2
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
255-1465 1
Repair Support
1
Traditional Design
D4 XL Blades
Blade 2YH
Ser. Number
Applies to:
D4B, D4C
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Performance End 480-8939 3 RH
19 21 472-4114 2 6
Bits 480-8940 3 LH GP: 522-3995
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
1
Repair Support
D4 LGP Blades
8YP
Applies to:
D4C
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 22
Blade Edge
1
Repair Support
1
Traditional Design
D4 LGP 119" Blades
Blade 84E, 19J, 45J
Ser. Number
Applies to:
D4E
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
3G-8321 6 RH 4T-3028 2 4
HC 22 19
3G-8322 6 LH 4T-3029 1 7 GP: 507-2812
Part
Quantity
Type Description Notes
Number
Bolts 5/8-11 x 2 4F-3654 27 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 27 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 27
Blade Edge
1
Repair Support
Applies to:
D4E
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
5A-4565 3 RH 4T-2974 1 5
HC 22 16
5A-4566 3 LH 4T-2973 2 6
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 5/8-11 x 2 4F-3654 17 Ensure Base Edge is flat and not excessively worn
Bolts 5/8-11 x 2-1/4 3F-5108 6 Clean and remove any paint on mating surfaces
Hardware Torque, Bang, Torque
Nuts 5/8-11 4K-0367 23
Washers 5/8" 5P-8247 23
Blade Edge
1
Repair Support
D4 XL 115" Blades
Blade 6XH
Ser. Number
Applies to:
D4H
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
140-6787 4 RH
GD (HC) 22 19 4T-6659 2 7
140-6788 4 LH GP: 507-2816
4T-5407 4 RH
EWL 25 19 4T-6659 2 7
4T-5408 4 LH GP: 507-2817
Specialty
473-9970 RH
A.R.M. 19 2 7
473-9971 LH GP: 507-2818
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 22
Blade Edge
1
Repair Support
Applies to:
D4H
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
8E-9379 4 RH
19 16 3G-9306 2 6 Equipped from factory
8E-9378 4 LH GP: 3G-9308
Level Cut
323-4279 4 RH
25 2 6
323-4280 4 LH
Level Cut 3G-4285 RH
19 4 16 3G-9306 2 6
Reversible (2 req'd) LH GP: 507-2819
140-6787 4 RH
GD (HC) 22 2 6
140-6788 4 LH
4T-5407 4 RH
EWL 25 2 6
4T-5408 4 LH
Specialty
473-9970 RH
A.R.M. 19 19 2 6
473-9971 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 20 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 20 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 20
Blade Edge
1
Repair Support
D4 LGP Blades
Blade 4GH, 9YH, 8ZH
Ser. Number
Applies to:
D4C, D4G, D4K, D4K2
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Performance End 480-8939 3 RH
19 21 472-4122 2 6
Bits 480-8940 3 LH GP: 522-3997
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
255-1423 1
Repair Support
Type
Hardware
Hardware
Quantity
Position
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
255-1500 1
Repair Support
1
Traditional Design
D5 Angle Blades
Blade 96H, 11J, 13J, 93H1-3846
Ser. Number
Applies to:
D5B
End Bits and Cutting Edges 8"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
4T-3049 6 RH 4T-3008 1 11
Level Cut 19 19 Equipped from factory
4T-3050 6 LH 4T-3020 2 9 GP: 507-2821
9F-7075 6 RH
GD 19
9F-7076 6 LH
3G-8295 6 RH
HC 22
3G-8296 6 LH
Hardware, Repair Parts and Wear Protection
Part Quantity
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 41 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 8-May 4K-0367 41 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 41
Blade Edge
1
Repair Support
D5 Angle Blades
Blade 8ZP
Ser. Number
Applies to:
D5C
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
6Y-5839 3 RH
16 16 142-4914 2 8 Equipped from factory
6Y-5840 3 LH GP: 142-4915
Level Cut
469-4405 3 RH
19
469-4404 3 LH
Level Cut 4T-6229 RH
16 3 16 142-4914 2 8
Reversible (2 Req'd) LH GP: 507-2822
Specialty
477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 5/8-11 x 2-1/4 3F-5108 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 22
Blade Edge
Repair Support
D5 XL Blades
Blade 8GP
Ser. Number
Applies to:
D5C
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
8E-7079 4 RH
19 16 140-0983 2 6 Equipped from factory
8E-7078 4 LH GP: 507-2824
Level Cut
323-4279 4 RH
25
323-4280 4 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-3/4 5J-4771 20 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 20 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 20
Blade Edge
Repair Support
D5 XL Blades
Blade 9WH, 6MH
Ser. Number
Applies to:
D5C, D5G
End Bits and Cutting Edges 8"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
8E-7079 4 RH
19 16 3G-9306 2 6 Equipped from factory
8E-7078 4 LH GP: 8E-7088
Level Cut
323-4279 4 RH
25
323-4280 4 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Type Description Notes
Number
Bolts 3/4-10 x 2-3/4 5J-4771 20 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 20 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 20
Blade Edge
183-4252 1
Repair Support
D5 LGP Blades
Blade 6PH, 9XH, 8NP
Ser. Number
Applies to:
D5G
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
331-0173 1
Repair Support
1
Traditional Design
D5 XL Blades
Applies to:
D5K, D5K2 Forestry
End Bits and Cutting Edges 8"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
8E-7079 4 RH
19 16 331-0162 2 6 Equipped from factory
8E-7078 4 LH GP: 255-1501
Level Cut
323-4279 4 RH
25
323-4280 4 LH
Specialty
Performance End 485-7965 4 RH
19 16 331-0162 2 6
Bits 485-7966 4 LH GP: 522-4002
Part
Quantity
Type Description Notes
Number
Bolts 3/4-10 x 2-3/4 5J-4771 20 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 20 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 20
Blade Edge
331-0173 1
Repair Support
D5 LGP Blades
Applies to:
D5K, D5K2
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Specialty
Performance End 480-8939 3 RH
19 21 472-4119 2 6
Bits 480-8940 3 LH GP: 522-4001
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
255-1484 1
Repair Support
1
Traditional Design
D5 LGP Narrow 115" Blades
Applies to:
D5G, D5K, D5K2
End Bits and Cutting Edges 6 1/2"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Performance End 480-8939 3 RH
19 21 472-4120 2 6
Bits 480-8940 3 LH GP: 522-3998
1 477-7839 3 RH
A.R.M. 16
477-7840 3 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 5/8-11 x 2-1/4 3F-5108 18 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 5/8-11 4K-0367 18 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5/8" 5P-8247 18
Blade Edge
255-1500 1
Repair Support
1
Traditional Design
D5 XL Blades
Blade 4GP, 6JP, HGP, X1C
Ser. Number
Applies to:
D5N
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
8E-9379 4 RH
19 16 8E-9377 2 7 Equipped from factory
8E-9378 4 LH GP: 255-1501
Level Cut
323-4279 4 RH
25
323-4280 4 LH
Level Cut 3G-4285 4 RH
19 16 8E-9377 2 7
Reversible (2 req'd) 4 LH GP: 8E-9376
140-6787 4 RH
GD (HC) 22 16 4T-6659 2 7
140-6788 4 LH GP: 507-2816
4T-5407 4 RH
EWL 25
4T-5408 4 LH
Specialty
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 22
Blade Edge
8E-9173 1
Repair Support
D5 XL (Narrow) Blades
Blade W5C
Ser. Number
Applies to:
D5N
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
8E-9379 4 RH
19 16 5Q-8193 2 6 Equipped from factory
8E-9378 4 LH GP: 5Q-8192
Level Cut
323-4279 4 RH
25
323-4280 4 LH
Level Cut 3G-4285 RH
19 4 16 5Q-8193 2 6
Reversible (2 req'd) LH GP: 507-2833
140-6787 4 RH
GD (HC) 22 16 5Q-8193 2 6
140-6788 4 LH GP: 507-2834
4T-5407 4 RH
EWL 25
4T-5408 4 LH
Specialty
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 20 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 20 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 20
Blade Edge
5Q-8204 1
Repair Support
D5 LGP Blades
Blade 4FP, BHY, 6KP
Ser. Number
Applies to:
D5N
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
8E-9379 4 RH
19 16 4T-8940 2 8 Equipped from factory
8E-9378 4 LH GP: 4T-5261
Level Cut
323-4279 4 RH
25
323-4280 4 LH
Level Cut 3G-4285 RH
19 4 16 4T-8940 2 8
Reversible (2 req'd) LH GP: 507-2835
140-6787 4 RH
GD (HC) 22 16 4T-8940 2 8
140-6788 4 LH GP: 507-2836
4T-5407 4 RH
EWL 25
4T-5408 4 LH
Specialty
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 24 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 24 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 24
Blade Edge
107-8228 1
Repair Support
D5 XL Foldable Blades
Blade 4GP, 6JP
Ser. Number
Applies to:
D5N
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
16 8E-9377 1 7
Level Cut 19 8E-9379 4 RH 16 259-6003 1 5 Equipped from factory
16 259-6004 1 6 GP: 259-6002
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 22
Blade Edge 259-5972 1
Repair Support 259-5990 1
Cat® D5N, D5R/2, D6K/N GET Options
Level Cut / Finish (Factory First Fit)
A.R.M. • Recommended for finish and semi-finish dozing
OPTION • Matches cutting edge’s depth of cut
AVAILABLE
• Low-impact, low abrasion materials only
Hot Cupped
• Forward protruding profile for better penetration than flat plate
EWL
• Sharpened, forward protruding profile for excellent penetration
• For fast blade loading, high productivity applications
General Purpose
• Sharpened, forward protruding profile for excellent penetration
• For fast blade loading, high productivity applications
Utility
• Thick cross-section for high face wear applications
• Recommended for high impact, high abrasion applications
EWL
A.R.M. • 25% more usable wear material than General Purpose
OPTION • Prolonged life and excellent penetration in abrasive conditions
AVAILABLE
Features
·Wear material equivalent to standard production system
·Up to 35% increased payload mass
·Up to 17% greater productivity
·Increased ground penetration
·Finish Dozing Capable
·Decreased track slip
Level Cut
D6 XL Blades
Applies to:
D5N, D6K
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Performance End 462-4828 4 RH
24 19 4T-6659 2 7
Bits 462-4829 4 LH GP: 522-4003
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 22
Blade Edge
240-1507 1
Repair Support
D6 XL Foldable Blades
Applies to:
D6K
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
16 8E-9377 1 7
Level Cut 19 8E-9379 4 RH 16 294-4519 1 5 Equipped from factory
19 300-0168 1 6 GP: 294-4514
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 22
Blade Edge 294-4501 1
Repair Support 294-4478 1
D6 XL Blades
Applies to:
D6K2
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Performance End 462-4828 4 RH
24 25 484-2299 2 7
Bits 462-4829 4 LH GP: 522-4004
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 22
Blade Edge
348-6286 1
Repair Support
D6 XL Foldable Blades
Applies to:
D6K2
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
342-8851 1 7
Level Cut 19 8E-9379 4 RH 19 371-0758 1 5 Equipped from factory
300-0168 1 6 GP: 371-0759
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 22
Blade Edge 455-0811 1
Repair Support 456-9654 1
D6 LGP Blades
Applies to:
D6K
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 24 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 24 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 24
Blade Edge
240-1523 1
Repair Support
Type
Hardware
Hardware
Quantity
Position
16 4T-8940 1 8
Level Cut 19 8E-9379 4 RH 16 297-1705 1 5 Equipped from factory
19 297-1699 1 7 GP: 297-1704
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 24 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 24 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 24
Blade Edge 297-1682 1
Repair Support 297-1697 1
D6 LGP Blades
Applies to:
D6K2
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 26 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 26 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 26
Blade Edge
455-0829 1
Repair Support
Type
Hardware
Hardware
Quantity
Position
16 8E-7245 1 9
Level Cut 19 8E-9379 4 RH 16 371-0786 1 6 Equipped from factory
19 297-1699 1 7 GP: 371-0808
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 26 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 26 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 26
Blade Edge 456-9689 1
Repair Support 456-9695 1
D6 XL VPAT Blades
Blade 3WP, 3XP, 5A5, B6X, G6M, G6N
Ser. Number
Applies to:
D5R2, D6N
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 22
Blade Edge
8E-9502 1
Repair Support
Type
Hardware
Hardware
Quantity
Position
3G-4282 1 7
Level Cut 19 8E-9379 4 RH 19 257-0264 1 5 Equipped from factory
257-0265 1 6 GP: 257-0207
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 22 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 22 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 22
Blade Edge 257-0215 1
Repair Support 257-0232 1
D6 XL SU Blades
Blade 2SP, 6GP, ECA, SGD, TR5
Ser. Number
Applies to:
D5R2, D6N
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
8E-9379 4 RH 9U-8057 2 4
19 19 Equipped from factory
8E-9378 4 LH 4T-6659 1 7 GP: 9U-8079
Level Cut
323-4279 4 RH 9U-8057 2 4
25 19
323-4280 4 LH 4T-6659 1 7 GP: 507-2848
140-6787 4 RH 9U-8057 2 4
GD (HC) 22 19
140-6788 4 LH 4T-6659 1 7 GP: 507-2850
4T-5407 4 RH 9U-8057 2 4
EWL 25 19
4T-5408 4 LH 4T-6659 1 7 GP: 507-2851
Specialty
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 23 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 23 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 23
Blade Edge 9U-8440 2
Repair Support 9U-8439 1
D5 Straight Blades
Blade
Ser. Number
Applies to:
D5R2
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
8E-9379 4 RH
19
8E-9378 4 LH
Level Cut
323-4279 4 RH
25
323-4280 4 LH
Level Cut 3G-4285 4 RH Equipped from factory
19 19 1U-2211 2 9
Reversible (2 req'd) 4 LH GP: 1U-2210
140-6787 4 RH
GD (HC) 22
140-6788 4 LH
4T-5407 4 RH
EWL 25
4T-5408 4 LH
Specialty
Performance End 462-4828 4 RH
24 19 1U-2211 2 9
Bits 462-4829 4 LH GP: 522-4008
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 26 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 26 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 26
Blade Edge 9U-8440 2
Repair Support 9U-8439 1
D6 LGP VPAT Blades
Blade 4MP, 5A7, B6L, G6G
Ser. Number
Applies to:
D5R2, D6N
End Bits and Cutting Edges 8"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Performance End 462-4828 4 RH
24 19 4T-2315 2 10
Bits 462-4829 4 LH GP: 522-4009
473-9970 4 RH
A.R.M. 19
473-9971 4 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 28 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 28 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 5P-8248 28
Blade Edge
112-7615 1
Repair Support
Type
Hardware
Hardware
Quantity
Position
278-2168 2 4
8E-9379 4 RH
Level Cut 19 19 278-2169 1 6 Equipped from factory
8E-9378 4 LH
278-2170 1 6 GP: 257-8150
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 28 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 28 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 28
Blade Edge 456-9686 1
Repair Support 257-8118 1
D6 XL Angle Blades
Blade
Ser. Number 1XP, 3GP, C4R, 1ZP, 1YP, 3PP, 4BP
Applies to: 8TP, 1AR, 1RP, 3EP, 1DH600-UP
D5R2, D6R, D6R2, D6T CLH, 3EP, BHN, P6S, EG3, RTH, RA5
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
9W-8874 6 RH
Level Cut 25 19 4T-2952 4 5 Equipped from factory
9W-8875 6 LH GP: 6Y-2039
122-8617 6 RH
Utility 35 19 4T-2985 4 5
122-8618 6 LH GP: 507-2957
6Y-4411 6 RH
GD 30 25 4T-2985 4 5
6Y-4410 6 LH GP: 507-2958
9W-1875 6 RH
EWL 30 25 4T-2985 4 5
9W-1876 6 LH GP: 507-2959
Specialty
Level Cut 433-9637 6 RH
25
A.R.M. 433-9639 6 LH
EWL 283-1027 6 RH
30 25 283-1029 4 5
A.R.M. 283-1028 6 LH GP: 521-8463
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 32 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 32 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 32
Blade Edge
6Y-1812 1
Repair Support
D6 XL VPAT Blades
Blade M1H, EG6
Ser. Number
Applies to:
D6R, D6T
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
9W-8874 6 RH
Level Cut 25 19 219-4599 2 10 Equipped from factory
9W-8875 6 LH
122-8617 6 RH
Utility 35
122-8618 6 LH
6Y-4411 6 RH
GD 30
6Y-4410 6 LH
9W-1875 6 RH
EWL 30
9W-1876 6 LH
Specialty
Level Cut 433-9637 6 RH
25
A.R.M. 433-9639 6 LH
EWL 283-1027 6 RH
30
A.R.M. 283-1028 6 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 32 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 32 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 32
Blade Edge
214-2271 1
Repair Support
D6 XL Semi U-Blades
Blade
Ser. Number 1TP, 3FP, 1WP, 3RP, 4AP, 8SP, BHM, D6C
Applies to: P6A, D2S, MGH, D4S, C4N, C4L, JNE, KTL
D6R, D6R2, D6T GNH, EG2, RTE, RTF
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
9W-8874 6 RH
Level Cut 25 19 9W-1878 2 8 Equipped from factory
9W-8875 6 LH GP: 9W-3762
122-8617 6 RH
Utility 35 25 6Y-3840 2 8
122-8618 6 LH GP: 507-2855
6Y-4411 6 RH
GD 30 25 6Y-3840 2 8
6Y-4410 6 LH GP: 507-2856
479-8139 1 5
479-8137 6 RH
Performance 25 25 479-8140 1 5
479-8138 6 LH
479-8141 1 6 GP: 479-8150
9W-1875 6 RH
EWL 30 25 6Y-3840 2 8
9W-1876 6 LH GP: 507-2857
Specialty
Level Cut 433-9637 6 RH
25
A.R.M. 433-9639 6 LH
EWL 283-1027 6 RH
30
A.R.M. 283-1028 6 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 28 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 28 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 28
Blade Edge 8E-5205 2
Repair Support 6Y-1390 1
D6 XW Angle Blades
Blade 6HP, A6B, EG4
Ser. Number
Applies to:
D6R, D6T
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
9W-8874 6 RH
Level Cut 25 19 109-9093 4 6 Equipped from factory
9W-8875 6 LH GP: 109-9092
122-8617 6 RH
Utility 35
122-8618 6 LH
6Y-4411 6 RH
GD 30
6Y-4410 6 LH
9W-1875 6 RH
EWL 30
9W-1876 6 LH
Specialty
Level Cut 433-9637 6 RH
25
A.R.M. 433-9639 6 LH
EWL 283-1027 6 RH
30
A.R.M. 283-1028 6 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 36 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 36 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 36
Blade Edge
4Z-9435 1
Repair Support
D6 XW VPAT Blades
Blade M3H, M4H, EG8
Ser. Number
Applies to:
D6R, D6T
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
9W-8874 6 RH
Level Cut 25 19 229-6958 2 11 Equipped from factory
9W-8875 6 LH GP: 223-3290
122-8617 6 RH
Utility 35
122-8618 6 LH
6Y-4411 6 RH
GD 30
6Y-4410 6 LH
9W-1875 6 RH
EWL 30
9W-1876 6 LH
Specialty
Level Cut 433-9637 6 RH
25 19 433-9640 2 11
A.R.M. 433-9639 6 LH GP: 507-2858
EWL 283-1027 6 RH
30
A.R.M. 283-1028 6 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 34 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 34 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 34
Blade Edge
223-3287 1
Repair Support
D6 XW Semi U-Blades
Blade 1WP, 9BP, B8B, GGP, GNP, GNL
Ser. Number EG9
Applies to:
D6R, D6T
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
Specialty
Level Cut 433-9637 6 RH
25
A.R.M. 433-9639 6 LH
EWL 283-1027 6 RH
30
A.R.M. 283-1028 6 LH
Hardware, Repair Parts and Wear Protection
Quantity
Part
Type Description Notes
Number
Bolts 3/4-10 x 2-1/2 5J-4773 30 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 30 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 30
Blade Edge 8E-5205 2
Repair Support 4Z-9239 1
D6 LGP Straight Blades
Blade B9B, 08S, JNC, SJG, GNK, EG5
Ser. Number RTS
Applies to:
D6R, D6R2, D6T
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
9W-8874 6 RH
Level Cut 25 19 4T-2950 2 10 Equipped from factory
9W-8875 6 LH GP: 229-6957
122-8617 6 RH
Utility 35 35 363-2958 2 10
122-8618 6 LH
6Y-4411 6 RH
GD 30
6Y-4410 6 LH
9W-1875 6 RH
EWL 30
9W-1876 6 LH
Specialty
Level Cut 433-9637 6 RH
25
A.R.M. 433-9639 6 LH
EWL 283-1027 6 RH
30
A.R.M. 283-1028 6 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 32 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 32 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 32
Blade Edge
223-4010 1
Repair Support
D6 XL Straight Blades
Blade B9B, 08S, JNC, SJG, GNK, EG5
Ser. Number R6L
Applies to:
D6R, D6R2
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
9W-8874 6 RH
Level Cut 25 19 4T-2952 3 5 Equipped from factory
9W-8875 6 LH GP: 6Y-1744
122-8617 6 RH
Utility 35 25 4T-2985 3 5
122-8618 6 LH GP: 507-2862
6Y-4411 6 RH
GD 30 25 4T-2985 3 5
6Y-4410 6 LH GP: 507-2863
9W-1875 6 RH
EWL 30 25 4T-2985 3 5
9W-1876 6 LH GP: 507-2864
Specialty
Level Cut 433-9637 6 RH
25
A.R.M. 433-9639 6 LH
EWL 283-1027 6 RH
30 25 283-1029 3 5
A.R.M. 283-1028 6 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 27 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 3/4-10 2J-3506 27 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 3/4" 5P-8248 27
Blade Edge
223-4010 1
Repair Support
D6 LGP Angle Blades
Blade MMX, FLS, EGS
Ser. Number
Applies to:
D6R, D6T
End Bits and Cutting Edges 10"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
9W-8874 6 RH
Level Cut 25 19 4T-2923 4 7 Equipped from factory
9W-8875 6 LH GP: 294-8236
122-8617 6 RH
Utility 35
122-8618 6 LH
6Y-4411 6 RH
GD 30
6Y-4410 6 LH
9W-1875 6 RH
EWL 30
9W-1876 6 LH
Specialty
Level Cut 433-9637 6 RH
25
A.R.M. 433-9639 6 LH
EWL 283-1027 6 RH
30
A.R.M. 283-1028 6 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 3/4-10 x 2-1/2 5J-4773 12 7/8-9 x 3 5J-2409 28 3/4" hardware for end bits
Hardware Nuts 3/4-10 2J-3506 12 7/8-9 2J-3505 28 7/8" hardware for cutting edges
Washers 3/4" 5P-8248 12 7/8" 5P-8249 28
Blade Edge
288-8441 1
Repair Support
Cat® D7-D9 GET Options
A.R.M. Level Cut / Finish
OPTION
AVAILABLE
• Recommended for finish and semi-finish dozing
• Matches cutting edge’s depth of cut
• Low-impact, low abrasion materials only
A.R.M.
OPTION
AVAILABLE Utility
• Thick cross-section for high face wear applications
• Acceptable in high impact, high abrasion applications
Hot Cupped
• Forward protruding profile for better penetration than flat plate
A.R.M.
OPTION
AVAILABLE
General Purpose (Factory First Fit)
• Sharpened, forward protruding profile for excellent penetration
• For fast blade loading, high productivity applications
A.R.M.
OPTION
AVAILABLE
EWL
• 25% more usable wear material than General Purpose
• Prolonged life and excellent penetration in abrasive conditions
Features
·Wear material equivalent to standard production system
·Up to 35% increased payload mass
·Up to 17% greater productivity
·Increased ground penetration
·Finish Dozing Capable
·Decreased track slip
Level Cut
D7 LGP Straight-Blades
Blade 2RP, 8RH, 5SP, 9KP, J4L, CDN, 8JH
Ser. Number Excludes D7E
Applies to:
D7R
End Bits and Cutting Edges 11"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
1
4T-6505 7 RH
Level Cut 25 19 128-58831 3 7
4T-6506
1 7 LH
GP: 128-5710
105-0575 7 RH
35 25 135-6537 3 7
105-0574 7 LH GP: 507-2866
Utility
105-0577 7 RH
45 35 145-7846 3 7
105-0576 7 LH GP: 507-2867
1
3G-8293 7 RH
HC 22 19 128-58831 3 7
3G-8294
1 7 LH GP: 507-2868
9W-6199 7 RH
GD 26 25 135-6537 3 7 Equipped from factory
9W-6198 7 LH
GP: 135-6538
Specialty
1
Level Cut 257-1918 7 RH
45
A.R.M 257-1919 7 LH
HC 455-3700 7 RH
22
A.R.M 455-3701 7 LH
GD 436-6249 7 RH
35
A.R.M 436-6248 7 LH
EWL 455-3706 7 RH
25
A.R.M. 455-3707 7 LH
Part
Quantity
Bolts 7/8-9 x 2-3/4 6F-0196 35 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 7/8-9 2J-3505 35 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 7/8" 5P-8249 35
Blade Edge
135-6536 1
Repair Support
Wear Bars
Wear
Protection Wear 12MM 2J-8523 5
Plates
Push Plate 16mm
Notes
1
Edges are 10" wide
D7 LGP Straight-Blades
Blade DKC, JG5
Ser. Number (D7E models only)
Applies to:
D7E
End Bits and Cutting Edges 11"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
1
4T-6505 7 RH
Level Cut 25
4T-65061 7 LH
105-0575 7 RH
35 25 265-6934 3 7
105-0574 7 LH GP: 507-2872
Utility
105-0577 7 RH
45
105-0576 7 LH
1
3G-8293 7 RH
22
3G-82941 7 LH
HC
3G-83151 7 RH
30 25 265-6934 3 7
3G-8316
1 7 LH GP: 507-2873
9W-6199 7 RH
GD 26 25 265-6934 3 7 Equipped from factory
9W-6198 7 LH
GP: 265-6940
Specialty
HC 455-3700 7 RH
22
A.R.M 455-3701 7 LH
GD 436-6249 7 RH
35
A.R.M 436-6248 7 LH
EWL 455-3706 7 RH
25
A.R.M. 455-3707 7 LH
Part
Quantity
Bolts 7/8-9 x 2-3/4 6F-0196 35 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 7/8-9 2J-3505 35 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 7/8" 5P-8249 35
Blade Edge
264-9796 1
Repair Support
Wear Bars
Wear
Protection Wear 8mm
Plates
Push Plate 16mm
Notes
1
Edges are 10" wide
D7 Straight-Blades
Blade 6KB, 8ZB, 4XC, 8NH, J8L, CDC
Ser. Number 8GH,DME, JG9
Applies to:
D7R, D7E
End Bits and Cutting Edges 11"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
1
4T-6505 7 RH
Level Cut 25 19 4T-53181 3 6
4T-6506
1 7 LH
GP: 4T-2360
105-0575 7 RH
35 25 7T-6678 3 6
105-0574 7 LH GP: 507-2882
Utility
105-0577 7 RH
45 35 107-3363 3 6
105-0576 7 LH GP: 507-2883
1
3G-8293 7 RH
HC 22 19 4T-53181 3 6
3G-8294
1 7 LH GP: 507-2884
9W-6199 7 RH
GD 26 25 7T-6678 3 6 Equipped from factory
9W-6198 7 LH
GP: 7T-6677
Specialty
HC 455-3700 7 RH
22
A.R.M 455-3701 7 LH
GD 436-6249 7 RH
35 25 436-6245 3 6
A.R.M 436-6248 7 LH
GP: 507-2887
EWL 455-3706 7 RH
25
A.R.M. 455-3707 7 LH
Part
Quantity
Bolts 7/8-9 x 2-3/4 6F-0196 32 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 7/8-9 2J-3505 32 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 7/8" 5P-8249 32
Blade Edge
6Y-5701 1
Repair Support
Wear Bars
Wear
Protection Wear 8mm 3J-3142 3
Plates
Push Plate 16mm 4J-3699 1
Notes
1
Edges are 10" wide
D7 Angling-Blades
Blade 4EB, 3CC, 4ZC, DMD, JG6
Ser. Number
Applies to:
D7R, D7E
End Bits and Cutting Edges 11"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
1
4T-6505 7 RH
Level Cut 25 19 4T-39011 3 7
4T-6506
1 7 LH
GP: 4T-3903
105-0575 7 RH
35 25 7T-6589 3 7
105-0574 7 LH GP: 507-2889
Utility
105-0577 7 RH
45 35 135-9778 3 7
105-0576 7 LH GP: 507-2890
1
3G-8293 7 RH
HC 22 19 4T-39011 3 7
3G-8294
1 7 LH GP: 507-2891
9W-6199 7 RH
GD 26 25 7T-6589 3 7 Equipped from factory
9W-6198 7 LH
GP: 7T-6585
Specialty
HC 455-3700 7 RH
22
A.R.M 455-3701 7 LH
35 455-3708 3 7
GD 436-6249 7 RH GP: 507-2894
35
A.R.M 436-6248 7 LH
35 335-9034 3 7
GP: 507-2895
EWL 455-3706 7 RH
25
A.R.M. 455-3707 7 LH
Part
Quantity
Bolts 7/8-9 x 2-3/4 6F-0196 35 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 7/8-9 2J-3505 35 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 7/8" 5P-8249 35
Blade Edge
307-6153 1
Repair Support
Wear Bars
Wear
Protection Wear 8mm 3J-3141 3
Plates
1
Notes
1
Edges are 10" wide
D7 LGP Angling-Blades
Blade DKC
Ser. Number (D7E models only)
Applies to:
D7E
End Bits and Cutting Edges 11"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
4T-65051 7 RH
Level Cut 25
4T-65061 7 LH
105-0575 7 RH
35 25 394-5646 3 8
105-0574 7 LH GP: 507-2897
Utility
105-0577 7 RH
45
105-0576 7 LH
3G-82931 7 RH
22
3G-82941 7 LH
HC
3G-83151 7 RH
30 25 394-5646 3 8
3G-83161 7 LH GP: 507-2892
9W-6199 7 RH
GD 26 25 394-5646 3 8 Equipped from factory
9W-6198 7 LH
GP: 394-5647
Specialty
HC 455-3700 7 RH
22
A.R.M 455-3701 7 LH
GD 436-6249 7 RH
35
A.R.M 436-6248 7 LH
EWL 455-3706 7 RH
25
A.R.M. 455-3707 7 LH
Part
Quantity
Bolts 7/8-9 x 2-3/4 6F-0196 38 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 7/8-9 2J-3505 38 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 7/8" 5P-8249 38
Blade Edge
394-3838 1
Repair Support
Wear Bars
Wear
Protection Wear 8mm
Plates
Push Plate 16mm
Notes
1
Edges are 10" wide
D7 Semi U-Blades
Blade 4DB, 2FC, 2JH, 1JP, 8LH, CDT
Ser. Number J6L, BHT, 8EH, BBC, JG7
Applies to:
D7R, D7E
End Bits and Cutting Edges 11"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Position
Thickness End Bits Edges
4T-65051 7 RH 1U-11921 2 E 6
Level Cut 25 19
4T-65061 7 LH 4T-53181 1 C 6
GP: 507-2901
105-0575 7 RH 7T-6936 2 E 6
35 25
105-0574 7 LH 7T-6678 1 C 6 GP: 507-2902
Utility
105-0577 7 RH 107-3362 2 E 6
45 35
105-0576 7 LH 107-3363 1 C 6 GP: 507-2903
3G-82931 7 RH 1U-11921 2 E 6
HC 22 19
3G-82941 7 LH 4T-53181 1 C 6 GP: 507-2904
9W-6199 7 RH 7T-6936 2 E 6
GD 26 25 Equipped from factory
9W-6198 7 LH 7T-6678 1 C 6
GP: 7T-6935
479-8135 1 RH 6
479-8133 7 RH
Performance 25 35 479-8136 1 LH 6
479-8134 7 LH
107-3363 1 C 6 GP: 479-8144
Specialty
436-6246 1 R 6
GD 436-6249 7 RH
35 25 436-6247 1 L 6
A.R.M 436-6248 7 LH
436-6245 1 C 6 GP: 507-2907
EWL 455-3706 7 RH
28
A.R.M. 455-3707 7 LH
257-1853 7 RH 7T-6936 2 E 6
LC NARROW 35 25
257-1854 7 LH 7T-6678 1 C 6
GP: 507-2908
Part
Quantity
Bolts 7/8-9 x 2-3/4 6F-0196 32 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 7/8-9 2J-3505 32 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 7/8" 5P-8249 32
Blade Edge 345-7693 2
Repair Support 3G-5352 1
Wear Bars
Wear
8mm 3J-3142 4
Protection Wear 323-2915 1
Plates 12mm 323-2916 1
323-2914 1
Push Plate 16mm 4J-3699 1
Notes
1 Edges are 10" wide
D7 U-Blades
Blade 9JB, 7AC, 5SB, 8MH, J1L, CDL
Ser. Number DMF, JG8
Applies to:
D7R, D7E
End Bits and Cutting Edges 11"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Position
Thickness End Bits Edges
1 1
4T-6505 7 RH 4T-7109 2 E 4
Level Cut 25 19
4T-6506
1 7 LH 4T-7110
1 2 C 6
GP: 507-2910
105-0575 7 RH 7T-6592 2 E 4
35 25
105-0574 7 LH 7T-6591 2 C 6 GP: 507-2911
Utility
105-0577 7 RH 135-9626 2 E 4
45 35
105-0576 7 LH 135-9627 2 C 6 GP: 507-2912
1 1
3G-8293 7 RH 4T-7109 2 E 4
HC 22 19
3G-8294
1 7 LH 4T-7110
1 2 C 6 GP: 507-2913
9W-6199 7 RH 7T-6592 2 E 4
GD 26 25 Equipped from factory
9W-6198 7 LH 7T-6591 2 C 6
GP: 7T-6590
Specialty
n/a 2 E
GD 436-6249 7 RH
35 25 436-2646 1 RC
A.R.M 436-6248 7 LH
436-2647 1 LC
EWL 455-3706 7 RH
28
A.R.M. 455-3707 7 LH
257-1853 7 RH 7T-6592 2 E 6
LC NARROW 35 25
257-1854 7 LH 7T-6591 2 C 6
GP: 507-2916
421-3139 7 RH 7T-6592 2 E 4
HC NARROW 30 25 Reduce width for shipping
421-3138 7 LH 7T-6591 2 C 6
GP: 507-2917
Part
Quantity
Bolts 7/8-9 x 2-3/4 6F-0196 34 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 7/8-9 2J-3505 34 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 7/8" 5P-8249 34
Blade Edge 6Y-5700 2
Repair Support 1U-1440 1
Wear Bars
Wear
8mm 3J-3142 4 4 piece set
Protection Wear 323-2931 1
3 piece set
Plates 12mm 323-2933 1
323-2932 1
Push Plate 16mm 4J-3699 1
Notes
1 Edges are 10" wide
D8 Angle-Blades
Blade BHR, 9ZP,DZD,D1E,D1F, DK4
Ser. Number
Applies to:
D8R, D8T
End Bits and Cutting Edges 13"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Thickness End Bits Edges
6Y-4277 7 RH
Level Cut 28 28 135-9373 3 8
6Y-4278 7 LH
GP: 507-2918
100-3139 7 RH
50 45 135-9629 3 8
100-3140 7 LH GP: 507-2919
Utility
136-8757 7 RH
60
136-8756 7 LH
3G-8291 7 RH
35 28 135-9373 3 8
3G-8292 7 LH GP: 507-2920
HC
3G-8283 7 RH
40 35 135-9628 3 8
3G-8284 7 LH GP: 507-2921
8E-4193 7 RH
GD 30 28 135-9373 3 8 Equipped from factory
8E-4194 7 LH
GP: 135-9374
8E-4537 7 RH
EWL 35 35 135-9628 3 8
8E-4538 7 LH
GP: 507-2922
Specialty
Utility 379-3173 7 RH
50
A.R.M 379-3174 7 LH
377-5059 7 RH
GD 377-5060 7 LH
35
A.R.M 455-3704 7 RH
455-3705 7 LH
Hardware and Repair Parts
Part
Quantity
Bolts 1-8 x 3 4F-4042 38 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 1-8 2J-3507 38 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 1" 5P-8250 38
Blade Edge
147-3527 1
Repair Support
Notes
D8 Semi U-Blades
Blade 1KH,2PP,2TP,3MP,3WH,1HP,6LH
Ser. Number 9BH,9PH,2NP,05A,9TP,BHW,B8S
Applies to: DZA,DZX, DK2
D8R, D8T
End Bits and Cutting Edges 13"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Position
Thickness End Bits Edges
6Y-4277 7 RH 6Y-5540 2 E 5
Level Cut 28 28
6Y-4278 7 LH 4T-6381 1 C 9
GP: 507-2837
100-3139 7 RH 112-2471 2 E 5
50 45
100-3140 7 LH 112-2472 1 C 9 GP: 507-2838
Utility
136-8757 7 RH
60
136-8756 7 LH
3G-8291 7 RH 6Y-5540 2 E 5
35 28
3G-8292 7 LH 4T-6381 1 C 9 GP: 507-2839
HC
3G-8283 7 RH 7T-9125 2 E 5
40 35
3G-8284 7 LH 7T-9126 1 C 9 GP: 507-2840
8E-4193 7 RH 6Y-5540 2 E 5
GD 30 28 Equipped from factory
8E-4194 7 LH 4T-6381 1 C 9
GP: 7T-5558
479-8131 1 RH 5
479-8129 7 RH
Performance 35 35 479-8132 1 LH 5
479-8130 7 LH
7T-9126 1 C 9 GP: 497-8143
8E-4537 7 RH 7T-9125 2 E 5
EWL 35 35
8E-4538 7 LH 7T-9126 1 C 9
GP: 9W-9096
Specialty
Utility 379-3173 7 RH
50
A.R.M 379-3174 7 LH
377-5059 7 RH
GD 377-5060 7 LH
35
A.R.M 455-3704 7 RH
455-3705 7 LH
Hardware, Repair Parts and Wear Protection
Part
Quantity
Bolts 1-8 x 3-1/4 4J-9058 33 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 1-8 2J-3507 33 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 1" 5P-8250 33
Blade Edge 239-4172 2
Repair Support 239-4176 1
Sidebar Protector 9J-9600 2 ref PELM1017 D8 and D9 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 331-7417 2
Adapter Plate 152-0027 2
Retainer 8E-6359 4
Pin 135-9350 4
Wear Bars 25x203x3658 107-3389 2 Provides 2 wear bar coverage full width of blade.
9W-2757 1
14mm 9W-2760 1 3 piece set
Wear
9W-1771 1
Protection Wear 9W-2756 1
Plates 9W-2757 1
16mm 9W-2758 1 5 piece set
9W-2759 1
9W-2760 1
Push Plate 16mm 9W-2756 1
D8 LGP Semi U-Blades
Blade KMB, LAA, DZC, DK5
Ser. Number
Applies to:
D8R, D8T
End Bits and Cutting Edges 13"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Position
Thickness End Bits Edges
6Y-4277 7 RH 6Y-5540 2 E 5
Level Cut 28 28
6Y-4278 7 LH 4Z-9058 1 C 13
100-3139 7 RH
50
100-3140 7 LH
Utility
136-8757 7 RH
60
136-8756 7 LH
3G-8291 7 RH 6Y-5540 2 E 5
35 28
3G-8292 7 LH 4Z-9058 1 C 13
HC
3G-8283 7 RH
40
3G-8284 7 LH
8E-4193 7 RH 6Y-5540 2 E 5
GD 30 28 Equipped from factory
8E-4194 7 LH 4Z-9058 1 C 13
GP: 4Z-9057
8E-4537 7 RH
EWL 35
8E-4538 7 LH
479-8131 1 RH 5
479-8129 7 RH
Performance 35 35 479-8132 1 LH 5
479-8130 7 LH
522-3986 1 C 13 GP: 497-8143
Specialty
Utility 379-3173 7
50
A.R.M 379-3174 7
377-5059 7 RH
GD 377-5060 7 LH 455-3702 2 E 5 GP: 507-2813
35 35
A.R.M 455-3704 7 RH 455-3703 1 C 13
455-3705 7 LH GP: 507-2923
Part
Quantity
Bolts 1-8 x 3-1/4 4J-9058 33 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 1-8 2J-3507 33 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 1" 5P-8250 33
Blade Edge 239-4172 2
Repair Support 256-4890 1
Sidebar Protector 9J-9600 2 ref PELM1017 D8 and D9 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 331-7417 2
Adapter Plate 152-0027 2
Retainer 8E-6359 4
Pin 135-9350 4
Wear Bars 25x203x3658 2 Provides 2 wear bar coverage full width of blade.
1
Wear 1
Protection 16mm 1 5 piece set
1
1
Push Plate 16mm 9W-2756 1
D8 U-Blades
Blade 1JH,2WP,6AH,9CH,9WP,CXB
Ser. Number A5G,DZB, DK3
Applies to:
D8R, D8T
End Bits and Cutting Edges 13"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Position
Thickness End Bits Edges
6Y-4277 7 RH 4T-6378 2 E 6
Level Cut 28 28
6Y-4278 7 LH 9W-5232 2 C 5
GP: 507-2924
100-3139 7 RH 112-2475 2 E 6
50 45
100-3140 7 LH 112-2473 2 C 5 GP: 507-2925
Utility
136-8757 7 RH
60
136-8756 7 LH
3G-8291 7 RH 4T-6378 2 E 6
35 28
3G-8292 7 LH 9W-5232 2 C 5 GP: 507-2926
HC
3G-8283 7 RH 9W-6092 2 E 6
40 35
3G-8284 7 LH 7T-9127 2 C 5 GP: 507-2927
8E-4193 7 RH 4T-6378 2 E 6
GD 30 28 Equipped from factory
8E-4194 7 LH 9W-5232 2 C 5
GP: 7T-5559
8E-4537 7 RH 9W-6092 2 E 6
EWL 35 35
8E-4538 7 LH 7T-9127 2 C 5
GP: 9W-9097
Specialty
Utility 379-3173 7 RH
50
A.R.M 379-3174 7 LH
377-5059 7 RH
GD 377-5060 7 LH
35
A.R.M 455-3704 7 RH
455-3705 7 LH
120 113-0343 2 E 9
HD Mining n/a
60 113-0323 1 C 14
Part
Quantity
Bolts 1-8 x 3-1/4 4J-9058 36 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 1-8 2J-3507 36 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 1" 5P-8250 36
Blade Edge 255-8188 2
Repair Support 255-8189 1
Sidebar Protector 9J-9600 2 ref PELM1017 D8 and D9 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 331-7417 2
Adapter Plate 152-0027 2
Retainer 8E-6359 4
Pin 135-9350 4
Wear Bars 25x203x4572 107-3391 2 Provides 2 wear bar coverage full width of blade.
6Y-7244 1
14mm 6Y-7245 1 3 piece set
Wear
6Y-7246 1
Protection Wear 9T-0253 1
Plates 9T-0254 1
16mm 4T-9592 1 5 piece set
9T-0255 1
9T-0256 1
Push Plate 16mm 4T-9592 1
D9 Semi U-Blades
Blade 1MH,5BH,1LP,2LP,7NH,2ZP
Ser. Number 2BP,9LH,9RP,CLC,CLN,CLY
Applies to: CMA,T9J,DKX,9S2
D9R, D9T
End Bits and Cutting Edges 13"
End Bits Edges
Notes
Thickness
Type
Hardware
Hardware
Quantity
Position
Position
Thickness End Bits Edges
6Y-4277 7 RH 6Y-5540 2 E 5
40 28
6Y-4278 7 LH 6Y-5539 1 C 12 GP: 507-2928
Level Cut
113-0336 7 RH 113-0321 2 E 5
60 60
113-0334 7 LH 113-0322 1 C 12 GP: 507-2929
100-3135 7 RH 112-2471 2 E 5
45 45
100-3136 7 LH 9W-7043 1 C 12 GP: 507-2930
Utility
100-3137 7 RH 113-0321 2 E 5
60 60
100-3138 7 LH 113-0322 1 C 12 GP: 507-2931
3G-8291 7 RH 6Y-5540 2 E 5
35 28
3G-8292 7 LH 6Y-5539 1 C 12 GP: 507-2932
HC
3G-8283 7 RH 7T-9125 2 E 5
40 35
3G-8284 7 LH 7T-5702 1 C 12 GP: 507-2933
8E-4197 7 RH 7T-9125 2 E 5
GD 35 35 Equipped from factory
8E-4196 7 LH 7T-5702 1 C 12 GP: 7T-5391
Specialty
455-3697 7 RH
Level Cut 40
455-3698 7 LH 455-3702 2 E 5 GP: 507-2934
28
GD 275-5993 7 RH 455-3696 1 C 12
35
A.R.M. 275-5994 7 LH GP: 507-2935
377-5702 7 RH
377-5703 7 LH 436-6252 1 RE 5
EWL GP: 507-2936
45 45 436-6251 1 LE 5
A.R.M. 436-6253 7 RH 436-6250 1 C 12
436-6254 7 LH GP: 507-2937
113-0332 7 RH 113-0321 2 E 5
HD Mining 120 60
113-0333 7 LH 113-0322 1 C 12 GP: 113-0320
Bolts 1-8 x 3-1/2 4J-9208 36 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 1-8 2J-3507 36 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 1" 5P-8250 36
Blade Edge 8E-5590 2
Repair Support 109-6347 1
Sidebar Protector 9J-9600 2 ref PELM1017 D8 and D9 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 331-7417 2
Adapter Plate 152-0027 2
Retainer 8E-6359 4
Pin 135-9350 4
25x203x3658 107-3389 2 Provides 2 wear bar coverage full width of blade.
Wear Bars
25x203x2438 107-3386 1
218-3885 1
14mm 218-3887 1 3 piece set
218-3888 1
Wear
Protection Wear 14mm 218-3885 1
Plates 9T-0251 1
16mm 7T-5803 1 5 piece set
9T-0252 1
14mm 218-3887 1
Push Plate 16mm 7T-5803 1
D9 U-Blades
Blade 1LH,2ZH,1MP,7PH,9MP,CMH
Ser. Number CMN,CMS,CMW,CMZ,T9H
Applies to: DKZ,D9J
D9R, D9T
End Bits and Cutting Edges 13"
End Bits Edges
Type Notes
Thickness
Hardware
Hardware
Quantity
Position
Position
Thickness End Bits Edges
6Y-4277 7 RH 6Y-5540 2 E 5
40 28
6Y-4278 7 LH 6Y-5538 1 C 15
GP: 507-2938
Level Cut
113-0336 7 RH
60
113-0334 7 LH
100-3135 7 RH 112-2471 2 E 5
45 45
100-3136 7 LH 9W-7044 1 C 15 GP: 507-2939
Utility
100-3137 7 RH
60
100-3138 7 LH
3G-8291 7 RH 6Y-5540 2 E 5
35 28
3G-8292 7 LH 6Y-5538 1 C 15 GP: 507-2940
HC
3G-8283 7 RH 7T-9125 2 E 5
40 35
3G-8284 7 LH 7T-5701 1 C 15 GP: 507-2941
8E-4197 7 RH 7T-9125 2 E 5
GD 35 35 Equipped from factory
8E-4196 7 LH 7T-5701 1 C 15
GP: 7T-5394
Specialty
GD 275-5993 7 RH
35
A.R.M. 275-5994 7 LH
377-5702 7 RH
377-5703 7 LH
EWL
45
A.R.M.
436-6253 7 RH
436-6254 7 LH
113-0332 7 RH 113-0321 2 E 5
HD Mining 120 60
113-0333 7 LH 113-0322 1 C 12
Part
Quantity
Bolts 1-8 x 3-1/2 4J-9208 39 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 1-8 2J-3507 39 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 1" 5P-8250 39
Blade Edge 8E-9228 2
Repair Support 8E-9227 1
Sidebar Protector 9J-9600 2 ref PELM1017 D8 and D9 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 331-7417 2
Adapter Plate 152-0027 2
Retainer 8E-6359 4
Pin 135-9350 4
Wear Bars 25x203x2438 107-3386 4 Provides 2 wear bar coverage full width of blade.
Wear 217-7155 1
Protection Wear
14mm 217-7156 1
Plates
217-7157 1
Push Plate 16mm 7T-5803
Cat® D10-D11 GET Options
Level Cut / Finish
• Recommended for finish and semi-finish dozing
• Matches cutting edge’s depth of cut
• Low-impact, low abrasion materials only
Utility
• Thick cross-section for high face wear applications
• Acceptable in high impact, high abrasion applications
Hot Cupped
• Forward protruding profile for better penetration than flat plate
General Purpose
• Sharpened, forward protruding profile for excellent penetration
• For fast blade loading, high productivity applications
EEWL
• 25% more usable wear material than General Purpose
• Prolonged life and excellent penetration in abrasive conditions
High Abrasion
• 25% more usable wear material than General Purpose
• Prolonged life and excellent penetration in abrasive conditions
D10 Semi U-Blades
Blade 1RH,7RH,4KP,6EP
Ser. Number BHJ,BHA,JGD,EPB
Applies to:
D10R, D10T
Thickness
Type
Hardware
Hardware
Edge Kit
Quantity
Position
Position
Thickness End Bits Edges
End Bit Kit
3G-7763 7 RH 9W-6608 2 E 5
Level Cut 35 35
3G-7764 7 LH 9W-6609 2 C 6 GP: 507-2942
1U-1545 7 RH 9W-6608 2 E 5
40 35
1U-1546 7 LH 9W-6609 2 C 6 GP: 507-2946
HC
7T-4689 7 RH 8E-2086 2 E 5 415-7997
60 60
7T-4688 7 LH 8E-2085 2 C 6 N/A GP: 507-2947
8E-4199 7 RH 9W-6608 2 E 5
GD 35 35
8E-4198 7 LH 9W-6609 2 C 6 GP: 7T-8712
434-1335 7 RH 392-7960 2 E 5
HA 50 50
434-1336 7 LH 392-7959 2 C 6 GP: 507-2949
Specialty
EWL 195-7173 7 RH
45
A.R.M. 195-7174 7 LH
EWL 445-7681 7 RH
45
A.R.M. 445-7682 7 LH
201-1230 1 R 5
EEWL
60 195-9170 1 L 5
A.R.M
195-9171 2 C 6
107-3515 6 RH
HD Mining 120 60 107-3510 1 C 22
107-3516 6 LH GP: 107-3500
Bolts 1-1/4 - 7 x 4 5P-8823 36 Ensure Base Edge is flat and not excessively worn
Hardware Clean and remove any paint on mating surfaces
Nuts 1-1/4 - 7 3K-9770 36
Torque, Bang, Torque
Washers 1-1/4 4K-0684 36
Blade Edge 8E-3581 2
Repair Support 8E-7430 1
Sidebar Protector 125-0800 2 ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 330-4455 2
Adapter Plate 135-9794 2
Retainer 4T-4707 4
Pin 8E-4708 4
Side
Cutter ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Weld-On
Half Arrow
135-9793 2
Thickness
Type
Hardware
Hardware
Edge Kit
Quantity
Position
Position
Thickness End Bits Edges
End Bit Kit
3G-7763 7 RH 9W-6608 2 E 5
Level Cut 35 35
3G-7764 7 LH 9W-6615 3 C 5
GP: 507-2942
136-8755 7 RH
75
136-8754 7 LH GP: 507-2945
1U-1545 7 RH 9W-6608 2 E 5
40 35
1U-1546 7 LH 9W-6615 3 C 5 GP: 507-2946
HC
7T-4689 7 RH 8E-2086 2 E 5 415-7999
60 60
7T-4688 7 LH 8E-2087 3 C 5 N/A GP: 507-2947
8E-4199 7 RH 9W-6608 2 E 5
GD 35 35
8E-4198 7 LH 9W-6615 3 C 5
GP: 7T-8713
434-1335 7 RH 392-7960 2 E 5
HA 50 50
434-1336 7 LH 392-7961 3 C 5
GP: 507-2949
Specialty
EWL 195-7173 7 RH
45
A.R.M. 195-7174 7 LH
EWL 445-7681 7 RH
45
A.R.M. 445-7682 7 LH
201-1230 1 R 5
EEWL
60 195-9170 1 L 5
A.R.M
223-8149 2 C 6
120 113-0338 2 E 9
HD Mining 120/60 n/a
60 8E-2087 3 C 5 GP: 113-0318
Bolts 1-1/4 - 7 x 4 5P-8823 39 Ensure Base Edge is flat and not excessively worn
Hardware Clean and remove any paint on mating surfaces
Nuts 1-1/4 - 7 3K-9770 39
Torque, Bang, Torque
Washers 1-1/4 4K-0684 39
Blade Edge 8E-5080 2
Repair Support 8E-6867 1
Sidebar Protector 125-0800 2 ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 330-4455 2
Adapter Plate 135-9794 2
Retainer 4T-4707 4
Pin 8E-4708 4
Side Cutter ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Weld-On
Half Arrow
135-9793 2
Wear Bars 25x203x2743 107-3387 4 Provides 2 wear bar coverage full width of blade.
Wear 218-3939 1
Protection Wear
14mm 218-3940 1
Plates
218-3941 1
D11 Semi U-Blades
Blade 4BB,4KB,9NH,1AP
Ser. Number 4XP,8PP,EPP
Applies to:
D11R, D11T
End Bits and Cutting Edges 16"
End Bits Edges Kits
Type Notes
Thickness
Hardware
Hardware
Edge Kit
Quantity
Position
Position
Thickness End Bits Edges
End Bit Kit
8E-4543 9 RH 9W-2425 2 E 9
GD 45 45
8E-4544 9 LH 9W-2426 2 C 9
GP: 521-8466
434-1337 9 RH 392-7963 2 E 9
HA 80 80
434-1338 9 LH 392-7964 2 C 9
GP: 521-8468
Specialty
195-7171 9 RH
195-7172 9 LH 195-9174 1 L 9
EWL GP: 521-8469
60 60 201-1231 1 R 9
A.R.M.
387-8251 9 RH 195-9175 2 C 9
387-8252 9 LH
GP: 521-8470
Offset 273-7225 9 RH
138-6484 1 L 9
Reversible 273-7226 9 LH GP: 521-8471
45 45 138-6485 1 R 9
1/2 life 273-7228 9 RH
138-6486 2 C 9
End Bits 273-7229 9 LH GP: 521-8472
107-3521 8 RH
HD Mining 120 60 107-3523 1 C 28
107-3522 8 LH
GP: 107-3501
Part
Quantity
Bolts 1-1/4 - 7 x 4 5P-8823 54 Ensure Base Edge is flat and not excessively worn
Hardware Clean and remove any paint on mating surfaces
Nuts 1-1/4 - 7 3K-9770 54
Torque, Bang, Torque
Washers 1-1/4 4K-0684 54
Blade Edge 101-9540 2
Repair Support 101-9533 1
Sidebar Protector 125-0800 2 ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 330-4455 2
Adapter Plate 135-9794 2
Retainer 4T-4707 4
Pin 8E-4708 4
Side
Cutter ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Weld-On
Half Arrow
135-9793 2
Hardware
Hardware
Edge Kit
Quantity
Position
Position
Thickness End Bits Thickness Edges
End Bit Kit
9W-4493 2 I 9
8E-9785 9 RH 415-7993
60 60 9W-4494 2 E 9
8E-9786 9 LH N/A
9W-4495 1 C 9 GP: 521-8473
Utility
195-7187 2 I 9
8E-9749 9 RH 415-7994
75 75 135-9577 2 E 9
8E-9748 9 LH N/A
135-9578 1 C 9 GP: 521-8474
9W-2424 2 I 9
8E-4543 9 RH
GD 45 45 9W-2425 2 E 9
8E-4544 9 LH
9W-2426 1 C 9 GP: 521-8475
9W-4493 2 I 9
8E-4545 9 RH 415-7993
EWL 60 60 9W-4494 2 E 9
8E-4546 9 LH 415-8001
9W-4495 1 C 9 GP: 9W-7605
195-7187 2 I 9
275-5445 9 RH 415-7994
EEWL 75 75 135-9577 2 E 9
275-5446 9 LH 415-8002
135-9578 1 C 9 GP: 521-8476
392-7962 2 I 9
434-1337 9 RH
HA 80 80 392-7963 2 E 9
434-1338 9 LH
392-7964 1 C 9 GP: 521-8477
Specialty
195-7171 9 RH
195-9173 2 I 9
195-7172 9 LH
EWL 195-9174 1 RE 9 GP: 208-5182
60 60
A.R.M. 201-1231 1 LE 9
387-8251 9 RH 195-9175 1 C 9
387-8252 9 LH
GP: 521-8478
120 109-9047 2 E 12
HD Mining n/a
60 109-9050 1 C 21
GP: 109-9046
Part
Quantity
Bolts 1-1/4 - 7 x 4 5P-8823 63 Ensure Base Edge is flat and not excessively worn
Hardware Clean and remove any paint on mating surfaces
Nuts 1-1/4 - 7 3K-9770 63
Torque, Bang, Torque
Washers 1-1/4 4K-0684 63
Blade Edge 8E-6346 2
Repair Support 8E-6347 1
Sidebar Protector 125-0800 2 ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 330-4455 2
Adapter Plate 135-9794 2
Retainer 4T-4707 4
Pin 8E-4708 4
Side
Cutter ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Weld-On
Half Arrow
135-9793 2
Wear Bars 25x203x3352 107-3388 4 Provides 2 wear bar coverage full width of blade.
Wear 126-8341 1
Protection Wear
14mm 126-8342 1
Plates
126-8343 1
D11 Carry Dozer
Blade 5JP,BHZ,MGP
Ser. Number
Applies to:
D11R CD, D11T CD
End Bits and Cutting Edges 19"
End Bits Edges
Type Notes
Hardware
Hardware
Quantity
Position
Thickness Part Number Thickness Edges
273-7228 9 RH
60 45 238-3171 5 8
273-7229 9 LH
GP: 521-8480
Short
273-7232 9 RH
75 60 238-3177 5 8
273-7233 9 LH
GP: 273-0141
273-7225 9 RH
Standard 60 45 238-3171 5 8 Equipped from factory
273-7226 9 LH GP: 273-0140
273-7230 9 RH
EWL 75 60 238-3177 5 8
273-7231 9 LH
GP: 521-8481
273-7223 9 RH
Penetration 60 45 238-3171 5 8
273-7224 9 LH
GP: 521-8482
Specialty
Standard 273-7234 9 RH
75 60 268-8751 5 8
EWL + A.R.M. 273-7235 9 LH GP: 521-8484
Penetration 223-8127 9 RH
60 60 268-8751 5 8
A.R.M. 223-8128 9 LH GP: 273-0142
273-7225 9 RH
Non-Reversible 60 45 229-7052 5 8
273-7226 9 LH GP: 273-0130
Non-Reversible 273-7230 9 RH
75 60 267-8654 5 8
EWL 273-7231 9 LH GP: 273-0131
Non-Reversible 273-7234 9 RH
75 60 268-8750 5 8
EWL A.R.M 273-7235 9 LH GP: 273-0132
Part
Quantity
Bolts 1-1/4 - 7 x 5 5P-8361 58 Ensure Base Edge is flat and not excessively worn
Hardware Nuts 1-1/4 - 7 3K-9770 58 Clean and remove any paint on mating surfaces
Torque, Bang, Torque
Washers 1-1/4 4K-0684 58
Blade Edge
135-2107 1
Repair Support
Sidebar Protector 125-0800 2 ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Protector ref PELJ1389 Shear Blocks for Sidebar Protectors
Shear Block 330-4455 2
Adapter Plate 135-9794 2
Retainer 4T-4707 4
Pin 8E-4708 4
Side
Cutter ref PELM0918 D10 and D11 Bulldozer Sidebar Protector
Weld-On
Half Arrow
135-9793 2
Wear Bars
Wear
Protection Wear
Plates
Track Type Tractor Cutting Edges
Bolt
Part Number Type Width Thickness Length Dim A Dim B Dim C Dim D Hole Size # Holes Wt. kgs
Diameter
176-2871 1 152.4 12.7 1237.0 76.1 85 152.4 85 18 5/8" 8 16.3
5F-3102 1 152.4 16 1415.8 76.2 47.5 101.6 47.5 18 5/8" 14 21.8
255-1429 1 165 16 1029.5 82.5 134 152.4 134 18 5/8" 6 18.0
255-1474 1 165 16 1248.5 82.5 90.7 152.4 91 18 5/8" 8 18.0
4T-6230 1 165 16 869.0 83.0 54 152.4 54 18 5/8" 6 16.5
6Y-5841 1 165 16 912.0 83.0 75 152.4 75 18 5/8" 6 16.5
140-2187 1 165 16 1008.0 83.0 123 152.4 123 18 5/8" 6 18.3
4T-6231 1 165 16 1062.0 83.0 74 152.4 74 18 5/8" 7 20.0
157-7338 1 165 16 1099.2 82.5 92.4 152.4 92.4 18 5/8" 7 19.9
4T-6232 1 165 16 1213.0 83.0 73 152.4 73 18 5/8" 8 23.0
141-0413 1 165 16 1236.0 83.0 84 152.4 84 18 5/8" 8 22.3
6Y-5842 1 165 16 1263.0 83.0 100 152.4 100 18 5/8" 8 22.9
142-4914 1 165 16 1290.0 82.5 112 152.4 112 18 5/8" 8 23.3
141-2238 1 165 16 1309.0 83.0 121 152.4 121 18 5/8" 8 23.8
143-3088 1 165 16 1630.0 82.5 53 152.4 53 18 5/8" 11 29.4
143-3089 1 165 16 1730.0 82.5 103 152.4 103 18 5/8" 11 31.3
104-9634 1 165 16 975.6 83.0 107 152.4 107 18 5/8" 6 17.8
294-4519 6A 201.6 16 831.5 100.8 152.3 152.4 69.6 21 3/4" 5 18.1
255-1505 1 203 16 980.5 100.8 109 152.4 109 21 3/4" 6 18.0
7T-9978 1 203 25 658.2 102.0 101 152.4 101 21 3/4" 4 26.7
7T-9977 1 203 25 1018.9 102.0 52 152.4 52 21 3/4" 7 41.3
7T-9976 1 203 25 1052.5 102.0 69 152.4 69 22 3/4" 7 42.6
3Y-0036 1 203 19 902.0 102.0 70 152.4 70 22 3/4" 6 25.6
3Y-0035 1 203 19 1070.0 102.0 78 152.4 78 22 3/4" 7 31.0
5A-8644 1 203 19 1405.0 102.0 36 101.6 36 18 5/8" 14 39.0
4T-2983 1 203 16 382.8 102.0 39 152.4 39 18 5/8" 3 8.8
364-3546 1 203.2 16 476.3 101.6 76.2 152.4 95.3 18 5/8" 3 11.4
4T-2972 1 203 16 674.1 102.0 109 152.4 109 18 5/8" 4 15.4
4T-2974 1 203 16 807.6 102.0 99 152.4 99 18 5/8" 5 18.6
259-6003 6A 203.2 16 810.8 100.8 131.4 152.4 69.8 21 3/4" 5 17.5
259-6004 6B 203.2 16 829.0 101.6 99 152.4 125 21 3/4" 6 17.0
297-1705 6A 203.2 16 832.8 102.4 129.6 1524.0 64 21 3/4" 5 17.8
4T-3720 1 203 16 857.9 102.0 48 152.4 48 21 3/4" 6 21.5
4T-2973 1 203 16 859.0 102.0 49 152.4 49 18 5/8" 6 19.8
3G-9306 1 203 16 884.0 102.0 61 152.4 61 22 3/4" 6 20.4
5Q-8193 1 203.2 16 891.0 100.8 65 152.4 65 21 3/4" 6 20.9
140-0983 1 203 16 914.0 102.0 76 152.4 76 21 3/4" 6 20.9
331-0162 1 203 16 930.0 100.8 84 152.4 84 21 3/4" 6 21.5
4T-2982 1 203 16 992.5 102.0 39 152.4 39 19 5/8" 7 22.7
371-0786 6A 203.2 16 994.6 100.8 90.3 152.4 69 21 3/4" 6 21.7
8E-9377 1 203 16 1054.0 102.0 70 152.4 70 21 3/4" 7 24.7
100-4578 1 203 16 1079.4 102.0 83 152.4 83 21 3/4" 7 20.4
4T-8940 1 203 16 1194.9 102.0 64 152.4 64 22 3/4" 8 27.5
8E-7245 1 203 16 1357.2 102.0 69 152.4 69 21 3/4" 9 31.9
4T-2980 1 203 16 1521.4 102.0 50 101.6 50 18 5/8" 15 35.1
4T-2977 1 203 16 1824.2 102.0 49 101.6 49 18 5/8" 18 42.1
4T-2979 1 203 16 2027.7 102.0 100 152.4 100 18 5/8" 13 46.8
4T-2975 1 203 16 2230.6 102.0 49 152.4 49 18 5/8" 15 51.5
4T-2976 1 203 16 2230.6 102.0 49 101.6 49 18 5/8" 22 51.5
4T-2981 1 203 16 2334.1 102.0 50 101.6 50 18 5/8" 23 53.8
4T-2978 1 203 16 2433.8 102.0 49 101.6 49 18 5/8" 24 56.1
4T-3027 1 203 19 382.8 102.0 39 152.4 39 18 5/8" 3 10.4
4T-3026 1 203 19 554.2 102.0 49 152.4 49 18 5/8" 4 15.5
301-1073 1 203.2 19 593.2 100.8 60.5 152.4 75.5 21 3/4" 4 16.4
275-6043 203 19 603.6 73.2 152.4 73.2 21 3/4" 4 13.4
425-9011 1 203.2 19 610.0 101.6 76 152.4 76 18 5/8" 4 16.9
9U-8057 1 203 19 627.2 102.0 85 152.4 85 22 3/4" 4 20.4
4T-3010 1 203 19 658.2 102.0 101 152.4 101 21 3/4" 4 18.4
4T-3028 1 203 19 674.1 102.0 109 152.4 109 18 5/8" 4 18.8
278-2168 6A 203.2 19 691.3 101.6 153.3 152.4 80.8 21 3/4" 4 17.2
257-8153 6A 203.2 19 694.3 101.6 143.3 152.4 93.8 21 3/4" 4 17.2
268-9847 203 19 769.6 152.4 21 3/4" 5 21.3
4T-3006 1 203 19 807.6 102.0 99 152.4 99 18 5/8" 5 22.5
Track Type Tractor Cutting Edges
Bolt
Part Number Type Width Thickness Length Dim A Dim B Dim C Dim D Hole Size # Holes Wt. kgs
Diameter
4T-0731 1 203 19 817.6 102.0 104 152.4 104 21 3/4" 5 22.8
4T-3020 1 203 19 858.7 102.0 23 101.6 23 18 5/8" 9 24.0
4T-3005 1 203 19 859.0 102.0 49 152.4 49 18 5/8" 6 24.0
257-0264 6A 203.2 19 864.2 101.6 119 152.4 135.6 21 3/4" 5 22.5
257-0265 6B 203.2 19 877.0 100.7 159.2 IRR 159.2 21 3/4" 6 21.8
5Q-6357 1 203.2 19 878.0 100.8 52 152.4 52 21 3/4" 6 30.6
371-0758 6A 203.2 19 892.5 100.8 183.4 152.4 99.5 21 3/4" 5 23.3
278-2170 1 203.2 19 921.6 1101.6 79.8 152.4 79.8 21 3/4" 6 25.0
1U-2207 1 203 19 960.9 102.0 100 152.4 100 22 3/4" 6 28.0
257-8151 6A 203.2 19 971.0 101.6 115.8 152.4 93.8 21 3/4" 6 24.9
133-1372 203 19 990.0 152.4 21 3/4" 7 26.9
4T-3029 1 203 19 992.4 102.0 39 152.4 39 18 5/8" 7 27.7
305-9452 2 203.2 19 1009.4 101.6 47.5 152.4 47.5 21 3/4" 7 28.2
4T-3013 1 203 19 1009.5 102.0 48 152.4 48 22 3/4" 7 28.2
4T-6262 1 203 19 1019.0 102.0 52 152.4 52 22 3/4" 7 28.2
278-2169 6C 203.2 19 1021.6 101.6 129.6 152.4 129.6 21 3/4" 6 25.1
3G-6062 1 203 19 1043.4 102.0 65 152.4 65 22 3/4" 7 29.0
4T-6659 1 203 19 1052.4 102.0 69 152.4 69 21 3/4" 7 30.6
5Q-5438 2 203 19 1093.0 102.0 84 134.9 64 22 3/4" 8 32.0
4T-3025 1 203 19 1113.4 102.0 100 152.4 100 19 5/8" 7 31.1
342-8851 1 203.2 19 1113.4 100.8 99.5 152.4 99.5 21 3/4" 7 31.0
3G-4282 1 203 19 1152.4 102.0 119 152.4 119 21 3/4" 7 32.1
4T-3008 1 203 19 1164.0 102.0 74 101.6 74 18 5/8" 11 32.5
4T-3030 1 203 19 1214.6 102.0 49 101.6 49 18 5/8" 12 33.9
425-9012 1 203.2 19 1216.0 101.6 78 152.4 78 18 5/8" 8 33.8
102-4580 1 203 19 1318.8 102.0 126 152.4 126 21 3/4" 8 37.3
1U-2211 1 203 19 1395.3 102.0 88 152.4 88 22 3/4" 9 41.0
169-4089 1 203.2 19 1421.6 100.8 101.2 152.4 101.2 21 3/4" 9 41.0
4T-3004 1 203 19 1441.3 102.0 111 152.4 111 22 3/4" 9 40.3
127-3050 203.2 19 1446.6 100.8 37.5 152.4 37.5 21 3/4" 10 39.0
177-4550 1 203.2 19 1495.0 101.6 81 166.6 81 21 3/4" 9 40.6
4T-3012 1 203 19 1495.7 102.0 62 152.4 62 22 3/4" 10 41.8
4T-3009 1 203 19 1519.7 102.0 74 152.4 74 22 3/4" 10 42.5
4T-2315 1 203 19 1557.6 102.0 93 152.4 93 22 3/4" 10 43.6
4T-3011 1 203 19 1619.1 102.0 48 152.4 48 22 3/4" 11 45.2
9W-8335 1 203 19 1722.9 102.0 100 152.4 100 21 3/4" 11 45.8
275-6039 203 19 1822.8 73.2 152.4 73.2 21 3/4" 12 40.5
4T-3021 1 203 19 1824.2 102.0 49 101.6 49 18 5/8" 18 51.0
5R-8053 1 203 19 2129.0 102.0 49 101.6 49 18 5/8" 21 59.6
4T-3023 1 203 19 2230.6 102.0 49 101.6 49 18 5/8" 22 62.4
4T-3014 1 203 19 2230.7 102.0 49 152.4 49 19 5/8" 15 62.4
4T-3017 1 203 19 2334.7 102.0 101 152.4 101 22 3/4" 15 65.3
310-1656 203 19 2432.3 152.4 25 7/8" 16 53.5
275-6030 203 19 2432.4 73.2 152.4 73.2 21 3/4" 16 54.1
4T-3024 1 203 19 2815.0 102.0 36 101.6 36 18 5/8" 28 78.7
253-0203 1 203 25 914.0 100.8 76 152.4 76 21 3/4" 6 34.4
368-1459 1 203.2 25 1152.4 100.8 119 152.4 119 21 3/4" 7 43.4
327-7911 1 203 25 1557.5 100.7 93 152.4 93 21 3/4" 10 58.6
357-6661 1 203.2 25.4 1266.8 100.7 100 152.4 100 18 5/8" 8 47.8
4T-7109 1 254 19 567.2 127.0 55 152.4 55 25 7/8" 4 21.3
4T-2945 1 254 19 706.7 127.0 49 152.4 49 22 3/4" 5 25.0
4T-2922 1 254 19 757.7 127.0 74 152.4 74 25 7/8" 5 25.7
4T-2952 1 254 19 801.7 127.0 96 152.4 96 22 3/4" 5 26.0
4T-2916 1 254 19 816.6 127.0 104 152.4 104 25 7/8" 5 28.6
109-9093 1 254 19 890.4 127.0 64 152.4 64 22 3/4" 6 30.7
4T-5318 1 254 19 894.1 127.0 66 152.4 66 25 7/8" 6 31.2
1U-1192 2 254 19 913.1 127.0 71 152.4 80 25 7/8" 6 29.3
4T-7110 2 254 19 988.0 127.0 87 152.4 139 25 7/8" 6 35.8
4T-2923 1 254 19 1029.5 127.0 58 152.4 58 25 7/8" 7 12.8
269-0367 2 254 19 1034.4 127.0 120 152.4 74 21 3/4" 7 35.1
4T-2921 1 254 19 1062.5 127.0 74 152.4 74 25 7/8" 7 35.8
4T-2948 1 254 19 1062.5 127.0 74 152.4 74 22 3/4" 7 35.7
4T-3901 1 254 19 1094.4 127.0 90 152.4 90 25 7/8" 7 37.7
Track Type Tractor Cutting Edges
Bolt
Part Number Type Width Thickness Length Dim A Dim B Dim C Dim D Hole Size # Holes Wt. kgs
Diameter
128-5883 1 254 19 1107.6 127.0 97 152.4 97 25 7/8" 7 37.9
4T-2946 1 254 19 1112.5 127.0 99 152.4 99 22 3/4" 7 37.0
5Q-5405 1 254 19 1133.3 126.2 94 139.0 67 22 3/4" 8 38.5
268-1116 2 254 19 1208.0 127.0 141 152.4 74 25 7/8" 8 41.1
9W-1878 2 254 19 1227.4 127.0 87 152.4 74 22 3/4" 8 45.9
4T-2944 1 254 19 1316.3 127.0 49 101.6 49 22 3/4" 13 125.5
4T-2885 1E 254 19 1318.9 203.0 105.5 IRR 105.5 21 3/4" 6 45.0
4T-2917 2 254 19 1357.3 127.0 69 152.4 69 25 7/8" 9 42.2
4T-2955 4 254 19 1357.3 127.0 69 152.4 69 22 3/4" 9 43.5
106-0956 2 254 19 1379.8 127.0 87 152.4 74 22 3/4" 9 50.7
219-4599 1 254 19 1466.0 127.0 47 152.4 47 21 3/4" 10 50.5
4T-2949 1 254 19 1519.5 127.0 49 101.6 49 22 3/4" 15 46.5
4T-2950 1 254 19 1560.6 127.0 95 152.4 95 22 3/4" 10 52.0
229-6958 1 254 19 1605.8 127.9 41 152.4 41 21 3/4" 11 55.3
4T-2954 1 254 19 2332.3 127.0 49 101.6 49 22 3/4" 23 75.0
4T-2951 1 254 19 3043.7 127.0 74 152.4 74 25 7/8" 20 102.4
4T-2991 1 254 25 706.7 127.0 49 152.4 49 22 3/4" 5 34.8
253-0195 1 254 25 717.4 126.1 53.9 152.4 53.9 25 7/8" 5 32.8
265-5478 7R 254 25 730.4 126.1 173.2 152.4 100 28 1" 4 31.2
265-5479 7L 254 25 730.4 126.1 173.2 152.4 100 28 1" 4 31.2
4T-2992 1 254 25 757.7 127.0 74 152.4 74 25 7/8" 5 37.3
332-5565 2 254 25 758.0 126.1 74 152.4 74 25 7/8" 5 34.0
332-5565 2 254 25 758.0 126.1 74 152.4 74 25 7/8" 5 34.0
4T-2986 2 254 25 779.1 127 96 152.4 74 28 1" 5 38.3
4T-2865 1 254 25 801.6 126.1 96 152.4 96 25 7/8" 5 39.4
4T-3417 2 254 25 809.6 127.0 100 152.4 100 28 1" 5 39.8
4T-3420 1 254 25 817.0 127.0 104 152.4 104 25 7/8" 5 40.2
4T-3423 1 254 25 856.1 127.0 47 152.4 47 28 1" 6 42.1
122-9227 1 254 25 894.0 127.0 66 152.4 66 25 7/8" 6 40.9
235-0327 2 254 25 900.0 126.1 64 152.4 74 25 7/8" 6 40.8
4T-2861 1 254 25 904.8 127.0 46 101.6 46 22 3/4" 9 44.5
4T-6532 1 254 25 910.1 127.0 74 152.4 74 25 7/8" 6 44.8
265-5477 5 254 25 923.0 126.1 80.5 152.4 80.5 28 1" 6 41.6
4T-2987 1 254 25 923.1 127.0 81 152.4 81 28 1" 6 45.4
4T-6512 1 254 25 923.1 127.0 81 152.4 81 25 7/8" 6 45.6
270-8083 2 254 25 960.8 126.1 99.4 152.4 99.4 28 1" 6 43.5
253-0196 5 254 25 970.5 126.1 81 152.4 128 25 7/8" 6 44.2
4T-8797 2 254 25 988.0 127.0 87 152.4 139 25 7/8" 6 46.0
4T-2988 1 254 25 1034.4 127.0 60 152.4 60 28 1" 7 50.9
4T-2989 1 254 25 1062.5 127.0 74 152.4 74 22 3/4" 7 52.3
4T-2993 1 254 25 1062.5 127.0 74 152.4 74 25 7/8" 7 52.3
4T-8798 1 254 25 1076.5 127.0 81 152.4 81 25 7/8" 7 50.5
4T-3422 1 254 25 1094.4 127.0 90 152.4 90 28 1" 7 53.9
4T-2990 1 254 25 1112.5 127.0 99 152.4 99 22 3/4" 7 54.7
4T-6238 1 254 25 1199.8 127.0 67 152.4 67 28 1" 8 59.1
4T-3419 1 254 25 1214.7 127.0 49 101.6 49 22 3/4" 12 59.8
4T-2994 1 254 25 1214.9 127.0 74 152.4 74 28 1" 8 59.8
6Y-3840 2 254 25 1227.4 127.0 87 152.4 74 22 3/4" 8 59.0
4T-2860 1 254 25 1316.3 127.0 49 101.6 49 22 3/4" 13 64.8
4T-6649 1 254 25 1319.0 62.0 152 IRR 152 22 3/4" 4 64.9
4T-3421 2 254 25 1357.3 127.0 69 152.4 69 25 7/8" 9 66.8
4T-2890 2 254 25 1359.2 127.0 70 152.4 70 22 3/4" 9 66.9
332-5567 7R 254 25 1366.3 126.1 180 152.4 61.3 25 7/8" 9 64.2
229-6599 2 254 25 1379.7 126.2 87 152.4 74 21 3/4" 9 63.7
4T-2889 1 254 25 1408.2 127.0 95 152.4 95 25 7/8" 9 69.3
4T-2862 1 254 25 1417.9 127.0 49 101.6 49 22 3/4" 14 69.8
332-5566 7L 254 25 1460.3 126.1 126.1 152.4 61.3 25 7/8" 9 64.2
4T-2863 1 254 25 1519.5 127.0 49 101.6 49 22 3/4" 15 74.8
4T-6513 4 254 25 1519.7 127.0 74 152.4 74 25 7/8" 10 74.8
4T-6531 1 254 25 1519.7 127.0 74 152.4 74 25 7/8" 10 74.8
4T-3418 1 254 25 1532.7 127.0 81 152.4 81 25 7/8" 10 75.4
4T-6514 1 254 25 1557.6 127.0 93 152.4 93 25 7/8" 10 76.7
4T-2888 1 254 25 1621.1 127.0 49 101.6 49 22 3/4" 16 79.8
Track Type Tractor Cutting Edges
Bolt
Part Number Type Width Thickness Length Dim A Dim B Dim C Dim D Hole Size # Holes Wt. kgs
Diameter
4T-6515 1 254 25 1773.5 127.0 49 152.4 49 25 7/8" 12 22.5
4T-2864 1 254 25 2332.3 127.0 49 101.6 49 22 3/4" 23 114.8
4T-6509 1 254 25 2534.4 127.0 48 152.4 48 25 7/8" 17 124.8
4T-2866 1 254 25 2789.8 126.1 99.5 152.4 99.5 25 7/8" 18 137.4
257-1851 1 254 35 757.6 126.1 74 152.4 74 25 7/8" 5 49.2
1U-4930 1 254 35 856.0 127.0 47 152.4 47 28 1" 6 55.2
1U-4932 1 254 35 923.1 127.0 81 152.4 81 28 1" 6 59.7
257-1852 1 254 35 1029.4 126.1 57.5 152.4 58 25 7/8" 7 66.7
1U-4933 1 254 35 1034.3 127.0 60 152.4 60 28 1" 7 66.8
1U-4931 1 254 35 1094.3 127.0 90 152.4 90 28 1" 7 70.8
345-6752 1 254 45 127.0 127.0 96.8 203.2 96.8 28 1" 3 50.8
367-2811 7L 254 45 683.4 126.1 152.3 152.4 74 25 7/8" 4 53.9
367-2812 7R 254 45 683.4 126.1 152.3 152.4 74 25 7/8" 4 53.9
286-2090 1 254 45 757.6 126.1 74 152.4 74 25 7/8" 5 63.6
107-3473 2 254 45 779.5 127.0 97 152.4 74 28 1" 5 63.2
367-2813 2 254 45 786.6 126.1 103.5 152.4 73.5 25 7/8" 5 64.6
107-3480 2 254 45 809.5 127.0 100 152.4 100 28 1" 5 66.3
107-3482 1 254 45 856.0 127.0 47 152.4 47 28 1" 6 72.5
107-3474 1 254 45 910.0 127.0 74 152.4 74 25 7/8" 6 77.2
107-3475 1 254 45 921.9 127.0 80 152.4 80 25 7/8" 6 78.2
107-3481 1 254 45 922.0 127.0 80 152.4 80 28 1" 6 77.2
107-3479 1 254 45 1034.3 127.0 60 152.4 60 28 1" 7 87.7
107-3483 1 254 45 1094.3 127.0 90 152.4 90 28 1" 7 92.9
107-3484 1 254 45 1214.8 127.0 74 152.4 74 28 1" 8 103.1
107-3477 1 254 45 1519.6 127.0 74 152.4 74 25 7/8" 10 129.0
107-3478 4 254 45 1519.7 127.0 74 152.4 74 25 7/8" 10 125.1
107-3476 1 254 45 1531.5 127.0 80 152.4 80 25 7/8" 10 130.0
7T-6592 1 280 25 567.1 139.1 55 152.4 55 25 7/8" 4 31.7
9W-9795 1 280 25 757.5 139.1 74 152.4 74 25 7/8" 5 36.3
9W-9792 1 280 25 816.5 139.1 104 152.4 104 25 7/8" 5 39.1
7T-6678 1 280 25 894.0 139.1 66 152.4 66 25 7/8" 6 41.9
7T-6936 2 280 25 907.9 139.1 66 152.4 80 25 7/8" 6 49.8
7T-6591 2 280 25 983.0 139.1 82 152.4 139 25 7/8" 6 53.9
9W-9794 1 280 25 1062.3 139.1 74 152.4 74 25 7/8" 7 50.9
9W-9796 1 280 25 1062.4 139.1 74 152.4 74 21 3/4" 7 50.9
7T-6589 1 280 25 1094.3 139.1 90 152.4 90 25 7/8" 7 61.1
135-6537 1 280 25 1107.6 139.1 97 152.4 97 25 7/8" 7 51.8
265-6934 1 280 25 1125.0 139.1 105.3 152.4 105.3 25 7/8" 7 53.2
135-9626 1 280 35 567.1 139.1 55 152.4 55 25 7/8" 4 38.4
9W-8656 2 280 35 779.0 139.1 96 152.4 74 28 1" 5 51.9
6Y-6359 1 280 35 809.5 139.1 100 152.4 100 28 1" 5 53.8
6Y-6358 1 280 35 856.0 139.1 47 152.4 47 28 1" 6 57.9
107-3363 1 280 35 894.0 139.1 66 152.4 66 25 7/8" 6 60.7
107-3362 2 280 35 907.9 139.1 66 152.4 80 25 7/8" 6 60.5
6Y-6761 1 280 35 910.0 139.1 74 152.4 74 25 7/8" 6 61.8
6Y-6762 1 280 35 921.9 139.1 80 152.4 80 25 7/8" 6 62.6
9W-8655 1 280 35 923.0 139.1 81 152.4 81 28 1" 6 62.6
135-9627 2 280 35 983.0 139.1 82 152.4 139 25 7/8" 6 65.8
9W-8657 1 280 35 1034.3 139.1 60 152.4 60 28 1" 7 70.1
135-9778 1 280 35 1094.3 139.1 90 152.4 90 25 7/8" 7 74.4
145-7846 1 280 35 1107.6 139.1 97 152.4 97 25 7/8" 7 75.3
9W-8658 1 280 35 1214.8 139.1 74 152.4 74 28 1" 8 82.4
6Y-6764 1 280 35 1519.6 139.1 74 152.4 74 25 7/8" 10 103.3
6Y-6765 1 280 35 1519.6 139.1 74 152.4 74 25 7/8" 10 101.4
6Y-6763 1 280 35 1531.5 139.1 80 152.4 80 25 7/8" 10 104.1
9W-9793 1 280 25 1357.2 139.1 69 152.4 69 25 7/8" 9 63.6
415-7213 2 280 35 771.0 139.1 28.5 152.4 73.5 28 1" 5 51.3
6Y-6360 1 280 35 1094.4 139.1 90 152.4 90 28 1" 9 74.3
6Z-8197 1 280 25 1114.4 139.1 110 152.4 90 25 7/8" 7 51.0
4T-6457 1 305 28 907.0 153.0 73 152.4 73 28 1" 6 58.0
4T-6456 1 305 28 950.9 153.0 95 152.4 95 28 1" 6 61.0
4T-6459 1 305 28 1325.1 153.0 53 152.4 53 28 1" 9 85.5
4T-6448 1 305 28 1519.6 153.0 74 152.4 74 28 1" 10 98.0
Track Type Tractor Cutting Edges
Bolt
Part Number Type Width Thickness Length Dim A Dim B Dim C Dim D Hole Size # Holes Wt. kgs
Diameter
4T-6453 1 305 28 1973.8 153.0 73 152.4 73 28 1" 13 124.0
4T-6450 1 305 28 2208.6 153.0 38 152.4 38 28 1" 15 143.0
151-2985 1 330 22 1700.0 100.0 93 IRR 93 28 1" 5 89.4
4T-6377 1 330 28 589.2 165.0 66 152.4 66 28 1" 4 41.0
4T-6379 2 330 28 589.2 165.0 66 152.4 66 28 1" 4 39.5
9W-5232 2 330 28 824.1 165.0 120 152.4 95 28 1" 5 59.2
135-9669 7L 330 28 893.5 164.1 215 152.4 69 28 1" 5 54.4
4T-6386 1 330 28 1039.4 165.0 63 152.4 63 28 1" 7 73.0
4T-6388 1 330 28 1062.4 165.0 74 152.4 74 28 1" 7 75.0
4T-6385 2 330 28 1222.7 165.0 71 152.4 85 28 1" 8 83.5
9W-5432 1 330 28 1240.0 165.0 87 152.4 87 28 1" 8 91.6
4T-6381 1 330 28 1353.2 165.0 67 152.4 67 28 1" 9 96.2
4T-6387 1 330 28 1367.2 165.0 74 152.4 74 28 1" 9 97.0
4T-9586 1 330 28 1693.9 165.0 85 152.4 85 28 1" 11 119.1
6Y-5539 1 330 28 1787.4 165.0 56 152.4 56 28 1" 12 122.7
4Z-9058 1 330 28 1953.1 165.0 62 152.4 62 28 1" 13 137.5
4T-9590 1 330 28 2164.1 165.0 92 152.4 92 28 1" 14 150.0
135-9670 7R 330 28.5 893.5 164.1 215 152.4 69 28 1" 5 54.4
135-9373 1 330 28.5 1268.0 164.1 101 152.4 101 28 1" 8 96.4
9W-9197 2 330 35 589.1 165.0 66 152.4 66 28 1" 4 48.4
9W-4398 2 330 35 800.1 165.0 117 152.4 74 28 1" 5 71.2
7T-9127 2 330 35 824.1 165.0 120 152.4 95 28 1" 5 68.2
9W-9098 1 330 35 1240.0 165.0 87 152.4 87 28 1" 8 105.4
135-9628 1 330 35 1268.0 164.1 101 152.4 101 28 1" 8 107.8
9W-4396 1 330 35 1693.9 165.0 85 152.4 85 28 1" 11 144.0
9W-4397 1 330 35 2164.1 165.0 92 152.4 92 28 1" 14 184.0
7T-5701 1 330 35 2264.1 165.0 65 152.4 65 28 1" 15 192.4
7J-2979 2 330 40 589.2 165.0 66 152.4 66 28 1" 4 55.5
7T-4345 2E 330 40 809.5 140.0 100 152.4 100 28 1" 5 76.5
7T-5235 1E 330 40 856.0 140.0 47 152.4 47 28 1" 6 83.2
135-9672 7R 330 40 866.9 164.1 188 152.4 69 28 1" 5 78.5
135-9673 7L 330 40 866.9 164.1 188 152.4 69 28 1" 5 54.4
7T-4353 1E 330 40 1034.3 165.0 60 152.4 60 28 1" 7 100.6
7J-2980 1 330 40 1039.4 165.0 63 152.4 63 28 1" 7 101.1
7T-4347 1E 330 40 1094.3 140.0 90 152.4 90 28 1" 7 106.6
135-9671 5 330 40 1201.0 164.1 67 152.4 67 28 1" 8 255.0
9W-4508 2 330 40 1222.7 165.0 71 152.4 85 28 1" 8 116.7
9W-4507 1 330 40 1353.2 165.0 67 152.4 67 28 1" 9 131.8
7J-2962 1 330 40 1519.6 165.0 74 152.4 74 28 1" 10 148.0
7J-2963 1 330 40 1973.8 165.0 73 152.4 73 28 1" 13 188.8
112-2471 2 330 45 803.0 165.0 120 152.4 74 28 1" 5 85.9
112-2475 1 330 45 900.0 165.0 69 152.4 69 28 1" 6 98.8
112-2474 1 330 45 1240.0 165.0 87 152.4 87 28 1" 8 136.6
135-9629 1 330 45 1268.0 164.1 101 152.4 101 28 1" 8 139.5
151-7476 6C 330 45 1330.0 164.1 284 IRR 284 28 1" 7 139.1
112-2472 1 330 45 1353.2 165.0 67 152.4 67 28 1" 9 148.7
275-5949 1B 330 45 1716.6 140.0 66 IRR 103.5 25 7/8" 11 189.4
136-8313 1E 330 45 1773.4 140.0 49 152.4 49 25 7/8" 12 195.4
9W-3926 1 330 45 2164.1 165.0 92 152.4 92 28 1" 14 238.3
9W-7044 1 330 45 2264.1 165.0 65 152.4 65 28 1" 15 249.0
364-6552 1 330 60 757.6 140.0 74 152.4 74 25 7/8" 5 112.0
113-0321 2 330 60 800.1 165.0 117 152.4 74 28 1" 5 113.3
366-2152 2 330 60 824.1 165.0 120 152.4 95 28 1" 5 11.9
123-3755 3E 330 60 973.9 140.0 73 152.4 139 25 7/8" 6 140.8
123-3756 2E 330 60 973.9 140.0 73 152.4 139 25 7/8" 6 140.8
135-8213 2E 330 60 973.9 140.0 73 152.4 139 28 1" 6 138.2
195-7272 1 330 60 1039.4 164.1 62.5 152.4 62.5 28 1" 7 151.1
123-3754 1E 330 60 1076.4 140.0 81 152.4 81 25 7/8" 7 159.4
135-8210 1E 330 60 1076.4 140.0 81 152.4 81 28 1" 7 159.0
109-9014 1E 330 60 1557.5 140.0 93 152.4 93 25 7/8" 10 230.8
109-3146 1E 330 60 1773.4 140.0 49 152.4 49 25 7/8" 12 262.2
113-0322 1 330 60 1787.3 165.0 56 152.4 56 28 1" 12 263.7
4T-6382 2B 330 28 633.4 164.3 50 IRR 50 28 1" 6 42.5
Track Type Tractor Cutting Edges
Bolt
Part Number Type Width Thickness Length Dim A Dim B Dim C Dim D Hole Size # Holes Wt. kgs
Diameter
6Y-5540 2 330 28 803.0 165.0 120 152.4 74 28 1" 5 53.2
6Y-5538 1 330 28 2264.2 165.0 66 152.4 66 28 1" 15 156.8
419-5719 1 330 28.5 1528.6 165.1 78.5 152.4 78.5 28 1" 10 105.1
9W-4503 2B 330 35 633.4 164.1 50 IRR 50 28 1" 8 51.2
9J-3751 1B 330 35 1218.0 165.0 76 IRR 76 28 1" 10 102.8
9W-4502 2 330 35 1222.8 165.0 71 152.4 85 28 1" 8 101.8
9W-4506 2B 330 40 633.4 164.1 50 IRR 50 28 1" 8 58.7
7T-4346 3E 330 40 809.6 140.0 100 152.4 100 28 1" 0 76.5
7J-2964 1 330 40 907.1 165.0 73 152.4 73 28 1" 6 88.3
7T-4352 1E 330 40 922.0 140.0 80 152.4 80 28 1" 6 89.8
7J-2960 1 330 40 951.0 164.1 94.5 152.4 94.5 28 1" 6 92.7
7J-2966 1 330 40 1062.5 165.0 74 152.4 74 28 1" 7 103.4
7T-4351 1E 330 40 1214.8 140.0 74 IRR 74 28 1" 8 118.3
7J-2965 1 330 40 1367.3 165.0 74 152.4 74 28 1" 9 133.2
375-4343 2 330 45 803.1 164.1 120 152.4 73.5 37 1-1/4" 5 85.1
112-2473 2 330 45 824.1 165.0 120 152.4 95 28 1" 5 88.2
375-4344 1 330 45 900.0 164.1 69 152.4 69 37 1-1/4" 6 97.8
375-4345 1 330 45 1039.4 164.1 62.5 152.4 62.5 37 1-1/4" 7 112.9
151-7477 6C 330 45 1330.0 164.1 284 IRR 284 28 1" 7 139.1
9W-3925 1 330 45 1694.0 165.0 85 152.4 85 28 1" 11 186.3
275-5950 1B 330 45 1716.6 190.0 66 IRR 103.5 25 7/8" 11 189.4
9W-7043 1 330 45 1787.5 165.0 56 152.4 56 28 1" 12 196.4
372-2789 7R 330 60 808.9 140.0 125.8 152.4 73.5 28 1" 5 113.0
372-2790 7L 330 60 808.9 190.0 125.8 152.4 73.5 28 1" 5 113.0
417-2880 2 330 60 814.1 164.1 110 152.4 94.5 28 1" 5 116.7
135-8212 3E 330 60 974.0 140.0 73 152.4 139 28 1" 6 138.2
370-8741 7R 330 60 994.9 190.0 93.9 152.4 139 25 7/8" 6 143.1
370-8742 7L 330 60 994.9 140.0 93.9 152.4 139 25 7/8" 6 143.1
372-2788 1E 330 60 1034.4 140.0 60 152.4 60 28 1" 7 152.7
417-2881 1 330 60 1039.4 164.1 62.5 152.4 62.5 28 1" 7 153.3
135-9640 330 120 4458.4 2539.7 25 7/8" 30 793.9
270-3779 5 330 40 900.0 164.1 69 152.4 69 28 1" 6 85.6
331-8977 6A 330.2 28 1024.6 164.3 188.6 152.4 74 28 1" 6 65.3
4Z-8039 1 330 28 1214.8 165.0 74 152.4 74 28 1" 8 84.8
113-0338 2B 406 60 1640.9 IRR 37 1-1/4" 9 500.6
135-9579 2 406 75 853.0 202.1 132 152.4 111 37 1-1/4" 5 186.8
135-9580 1 406 75 992.0 202.1 115 152.4 115 37 1-1/4" 6 224.4
371-7105 1B 406 28.5 2489.2 203.0 152.4 IRR 152.4 37 1-1/4" 16 207.6
6Y-0314 2E 406 35 633.3 180.0 50 IRR 50 28 1" 6 62.3
6Y-0315 3E 406 35 633.3 180.0 50 IRR 50 28 1" 6 62.3
9W-0775 1 406 35 756.5 203.0 74 152.4 74 37 1-1/4" 5 80.0
7T-9779 2 406 35 831.6 203.0 127 152.4 95 37 1-1/4" 5 83.2
9W-6615 1 406 35 847.9 203.0 119 152.4 119 37 1-1/4" 5 94.5
9W-6608 4 406 35 859.0 203.0 138 152.4 111 37 1-1/4" 5 96.0
7T-9781 4 406 35 876.6 203.0 127 152.4 140 37 1-1/4" 5 88.0
7T-9782 1 406 35 908.9 203.0 74 152.4 74 37 1-1/4" 6 93.6
275-2490 1 406 35 923.0 202.1 46 152.4 115 37 1-1/4" 6 95.4
9W-6609 1 406 35 991.9 203.0 115 152.4 115 37 1-1/4" 6 110.5
6Y-0310 1E 406 35 1039.4 180.0 63 152.4 63 28 1" 9 108.0
6Y-0313 1E 406 35 1353.2 180.0 67 152.4 67 28 1" 9 137.7
7T-4342 1E 406 40 1039.4 180.0 63 152.4 63 28 1" 7 124.1
6Y-0480 2E 406 45 633.4 180.0 50 IRR 50 28 1" 6 80.8
6Y-0481 3E 406 45 633.4 180.0 50 IRR 50 28 1" 8 80.8
9W-3931 1 406 45 756.5 203.0 74 152.4 74 37 1-1/4" 5 101.0
6Y-0019 2B 406 45 782.6 203.0 93 IRR 80 37 1-1/4" 9 99.3
9W-3930 4 406 45 831.6 203.0 127 152.4 95 37 1-1/4" 5 107.9
9W-6658 1 406 45 847.9 203.0 119 152.4 119 37 1-1/4" 5 113.7
369-8066 1 406 45 923.0 202.1 46 152.4 115 37 1-1/4" 6 123.6
364-6551 1 406 45 925.5 202.1 81.7 152.4 81.7 37 1-1/4" 6 123.9
9W-6656 1 406 45 991.9 203.0 115 152.4 115 37 1-1/4" 6 132.9
229-7052 1B 406 45 1003.4 127.0 1207 IRR 102.7 37 1-1/4" 8 133.5
9W-2425 2B 406 45 1019.9 203.0 50 IRR 56 37 1-1/4" 11 131.1
9W-2424 1B 406 45 1023.3 203.0 55 IRR 55 37 1-1/4" 9 135.3
Track Type Tractor Cutting Edges
Bolt
Part Number Type Width Thickness Length Dim A Dim B Dim C Dim D Hole Size # Holes Wt. kgs
Diameter
6Y-0017 2B 406 45 1023.9 203.0 52 IRR 58 37 1-1/4" 11 131.5
6Y-0016 1B 406 45 1029.4 203.0 58 IRR 58 37 1-1/4" 9 136.1
6Y-0476 1E 406 45 1039.4 180.0 63 152.4 63 28 1" 7 140.2
6Y-0018 1B 406 45 1064.4 203.0 75 IRR 75 37 1-1/4" 9 141.0
9W-2426 1B 406 45 1098.4 203.0 92 IRR 92 37 1-1/4" 11 145.6
6Y-0478 3E 406 45 1222.7 180.0 71 152.4 85 28 1" 8 164.3
6Y-0477 2E 406 45 1222.8 180.0 71 152.4 85 28 1" 8 161.4
6Y-0479 1E 406 45 1353.2 180.0 67 152.4 67 28 1" 9 182.7
373-1117 1B 406 45 3048.0 202.1 111 IRR 1111 37 1-1/4" 25 404.7
288-6084 406 60 519.3 76.2 37 1-1/4" 5 88.7
6Y-0022 2B 406 60 782.6 203.0 93 IRR 80 37 1-1/4" 9 133.3
6Y-0020 2B 406 60 1023.9 203.0 52 IRR 58 37 1-1/4" 11 176.6
6Y-0021 1B 406 60 1029.4 203.0 58 IRR 58 37 1-1/4" 11 182.9
6Y-0023 1B 406 60 1064.4 203.0 75 IRR 75 37 1-1/4" 11 189.4
275-6051 1B 406 60 1365.6 202.1 73.2 IRR 73.2 37 1-1/4" 11 243.8
109-9050 2 406 60 3155.2 202.1 55 152.4 55 37 1-1/4" 21 566.0
107-3510 4 406 60 3720.8 202.1 138.4 IRR 138.4 37 1-1/4" 22 681.8
107-3523 4 406 60 4259.6 202.1 55 IRR 50 37 1-1/4" 28 782.0
135-9577 2B 406 75 1014.5 202.1 47 IRR 56 37 1-1/4" 11 219.7
195-7187 1B 406 75 1023.4 202.1 55 IRR 55 37 1-1/4" 11 228.1
135-9578 1B 406 75 1098.4 202.1 92 IRR 92 37 1-1/4" 11 245.6
109-9047 2 406 120 1729.9 37 1-1/4" 0 488.9
366-4328 1B 406 75 1003.4 127.0 120.7 IRR 120.7 37 1-1/4" 8 202.1
7T-4341 1E 406 40 900.1 180.0 69 152.4 69 28 1" 6 107.5
9W-6657 4 406 45 859.1 203.0 138 152.4 111 37 1-1/4" 5 111.5
9W-3929 4 406 45 876.6 203.0 127 152.4 140 37 1-1/4" 5 114.1
9W-3928 1 406 45 909.0 203.0 74 152.4 74 37 1-1/4" 6 121.4
128-5904 1E 457 75 847.9 202.1 119 152.4 119 37 1-1/4" 5 218.3
128-5905 3 457 75 1065.0 202.1 138 152.4 74 37 1-1/4" 7 263.3
128-5906 2E 457 75 1065.0 202.1 138 IRR 74 37 1-1/4" 7 263.3
238-3171 1O 483 45 1003.4 202.1 102.7 IRR 120.7 37 1-1/4" 16 155.0
195-5118 1 483 45 1023.4 202.1 55 152.4 55 37 1-1/4" 9 155.1
74
Track-Type Tractors
Ripper Shanks
Shank Assembled Field Repair
Machine Model Type Part Number Tip Size
Size Length Adapter Nose
4
438mm 8J-5299
D3, D3B, D3C
35mm x 75mm Straight 525mm 430-34994 J200
D4B, D4C, D5C
D5R, D5R2
Straight 711mm 484-8282 R350
D6G, D6M, D6N, 73mm x 176mm 8E-7350
CR350
D6R, D6R2, D6T
Curved 667mm 9J-89234
R350
D7R, D7E 73mm x 228mm Straight 1238mm 9W-73824 9W-7488 8E-7350
CR350
1
For 1 pin shank protectors (MS) - Multi Shank
2
Single shank ripper size increased on newer machines (SS) - Single Shank
3
D11 (LP) uses 2 - 4Z9314 and 1 - 4Z9312 (DR) - Deep Rip
4
No accomodations for Shank Protector (LP) - Leach Pad
5
Alternate carriage pin hole locations
75
Track-Type Tractors
Tips
Tip Tips Hardware
Machine Model Type Style
Size Short Int. Long Pin Qty
Centerline 1U-3202
D3, D3B, D3C J200 Pin 8E-6208 1
J200 Penetration 1U-3209
D4B, D4C, D5C Pin-on Retainer 6E-6209 1
Sharp 9W-8209
CR500
D10L CapSure
SAFETY FIRST!
Hammerless tip replacement is fast and easy
with Cat CapSure Ripper Tips
76
Track-Type Tractors
Shank Protectors
Shank
Machine Model Type Hardware Qty
Width Standard Sharp Extended Multi-Piece2
D5M, D5N
73mm
D6K, D6K2
D5R, D5R2
Pin 114-0358 1
D6G, D6M, D6N, Pin-on 138-0796
Retainer 114-0359 1
D6R, D6R2, D6T
75mm
D8L
Pin 6Y-3394 2
Pin-on 6J-8814 8E-1848 132-4716
Retainer 8E-4743 2
Upper 380-1211 1
D9N, D9R2 CapSure 380-1214 380-1223
Lower 380-1222 1
D9R2, D9T
9W-8365 Pin 6Y-1204 2
Pin-on 3G-95941 132-1014 109-9061
6Y-97041 Retainer 6Y-1202 2
D9L, D10N
90mm
Upper 512-5770 1
CapSure 444-9711 357-2702
D10N Lower 353-2548 1
Upper 416-0246 1
CapSure 331-3510 357-2704
Lower 353-2548 1
Protector 109-9063
Bar (Stock)3 109-9076
Clamp 109-9072 Pin 9N-4245 2
Pin-on 9N-4621 132-1016
Spacers 132-1004 Retainer 6Y-1205 2
D11N, D11R, D11T Bolts 5B-5473
110mm Nuts 2J-3507
Upper 353-2546 1
CapSure 331-3560 357-2701
Lower 353-2600 1
1
1-pin shank protector
2
Single shank protector size increased on newer machines
3
Multi-piece Shank Protector - cut bar stock to length required
77
MOTORGRADERS
78
Cat® MG Grader Bit System
Grader Bit Options
Standard Bit
•Baseline Bit - 30mm wide
•Moderate penetration
Penetration Bit
• Narrower than standard bit - 23 mm wide
• Wider gap allows larger aggregate to flow through
Sharp Bit
• 50% narrower than the standard bit - 15.5 mm wide
• Allows larger aggregate to flow through
Wide Bit
• Can configure as a continuous edge
• Twice as wide as the standard bit (63 mm)
Bit Ratio: The ratio between the length of the bit and the length of the bit gap.
12' Blades
5/8" Bolt Holes
Machine 120H, 12H, 135H, 140H
Models
Rippers / Scarifiers
Shanks Tips
Adapter Size Pin Retainer Misc
Type Part Number Type Std A.R.M.
Centerline 1U-3202
Rear Mount
Straight 8J-5299 Penetration 1U-3209 8E-6208 6E-6209
J2002 Did you know?
Edges with 5/8" bolt holes Sharp 9W-8209
Rear Mount Straight 9J-6586 can be used with 3/4" Penetration 6Y-0309 168-1309 Repair Nose
136-8308 114-0359
R3003 Curved 9J-8913 moldboards. Sharp 9W-7309 8E-7300
Scarifier Standard 195-7218 Use bushings: General Purpose 195-7234
V-Block4 7/8" - 280-4070 High Temp
Long 7D-4501 6Y-5230 143-3074 Tip Removal Tool
1" - 280-4071 5K-1459 5K-1458
Scarifier Standard 195-7219 General Purpose 195-7234 6B-3260
Straight Block5 Long High Temp 6Y-5230 143-3074
Hardware and Wear Protection
Type Application Hardware Quantity Bolts Nuts Washers Notes
Standard Edges Bolts 5/8-11 x 2-1/4 26 3F-5108 Inspect moldboard for excess wear
Rotating Bits Bolts 3/4-10 x 2-3/4 24 4F-3657 Ensure moldboard and new edges
4K-0367 5P-8247 are free from paint and debris.
Specialty1 Bolts 5/8-11 x 2-3/4 w/ 3/4 head 24 452-8225
Torque 5/8" Nuts to 200 +/- 30 ft. lb.
Hardware End Bits Bolts 5/8-11 x 2-1/4 10 3F-5108
Overlays Bolts 3/4-10 x 2-3/4 8 4F-3657
Front Blade Bolts 3/4-10 x 2-1/4 see above 4F-7827 2J-3506 5P-8248
Extension Bolts 5 4F-3658
13.5" Radius 4D-5820 2
Wear Protection Moldboard Plate
16.25" Radius 8W-5265 2
4
1
3/4" Bolt Holes - requires special bolts 452-8225 Front Notched
5
2
Used on 120H, 135H Rear Notched
3
Used on 12H, 140H, 143H
12' Blades
3/4" Bolt Holes
Machine 120K, 12K, 140K
Models 120M, 12M, 140M, 160M
Rippers / Scarifiers
Shanks Tips
Adapter Size Pin Retainer Misc
Type Part Number Type Std A.R.M.
Rear Mount Straight 9J-6586 Penetration 6Y-0309 168-1309 Repair Nose
136-8308 114-0359
R300 Curved 9J-8913 Sharp 9W-7309 8E-7300
Contact your dealer for General Purpose
Scarifier Standard 195-7218 195-7234
custom cutting edge
V-Block4 Long 7D-4501 High Temp 6Y-5230 143-3074 Tip Removal Tool
combinations. 5K-1459 5K-1458
Scarifier Standard 195-7219 General Purpose 195-7234 6B-3260
Straight Block5 Long High Temp 6Y-5230 143-3074
Hardware and Wear Protection
Type Application Hardware Quantity Bolts Nuts Washers Notes
Standard Edges Bolts 3/4-10 x 2-1/2 26 5J-4773 Inspect moldboard for excess wear
Specialty Bolts 3/4-10 x 2-3/4 23 5J-4771 Ensure moldboard and new edges
are free from paint and debris.
End Bits Bolts 3/4-10 x 2-1/2 10 5J-4773
Hardware 2J-3506 5P-8248 Torque 3/4" Nuts to 350 +/- 45 ft. lb.
Overlays Bolts 3/4-10 x 3-3/4 8 5F-8933
Front Blade Bolts 3/4-10 x 2-1/4 17 4F-7827
Extension Bolts 3/4-10 x 2-1/4 4 5J-4773
13.5" Radius 4D-5820 2
Wear Protection Moldboard Plate
16.25" Radius 8W-5265 2
4
1
for 6" edges used on 120M, 140M, 12M, 160M Front Notched
5
Rear Notched
13' Blades
5/8" Bolt Holes
Machine 120H, 12H, 135H, 140H, 143H, 160H, 163H
Models
Rippers / Scarifiers
Shanks Tips
Adapter Size Pin Retainer Misc
Type Part Number Type Std A.R.M.
Centerline 1U-3202
Rear Mount
Straight 8J-5299 Penetration 1U-3209 8E-6208 6E-6209
J2002
Sharp 9W-8209
Rear Mount Straight 9J-6586 Don't see Penetration 6Y-0309 168-1309 Repair Nose
what you need? 136-8308 114-0359
R3003 Curved 9J-8913 Sharp 9W-7309 8E-7300
Ask about our
Scarifier Standard 195-7218 MAO program. General Purpose 195-7234
V-Block4 Long 7D-4501 High Temp 6Y-5230 143-3074 Tip Removal Tool
5K-1459 5K-1458
Scarifier Standard 195-7219 General Purpose 195-7234 6B-3260
Straight Block5 Long High Temp 6Y-5230 143-3074
Hardware and Wear Protection
Type Application Hardware Quantity Bolts Nuts Washers Notes
Standard Edges Bolts 5/8-11 x 2-1/4 28 3F-5108 Inspect moldboard for excess wear
Rotating Bits Bolts 3/4-10 x 2-3/4 24 4F-3657 Ensure moldboard and new edges
4K-0367 5P-8247 are free from paint and debris.
Specialty1 Bolts 5/8-11 x 2-3/4 w/ 3/4 head 24 452-8225
Torque 5/8" Nuts to 200 +/- 30 ft. lb.
Hardware End Bits Bolts 5/8-11 x 2-1/4 10 3F-5108
Overlays Bolts 3/4-10 x 2-3/4 8 4F-3657
Front Blade Bolts 3/4-10 x 2-1/4 see above 4F-7827 2J-3506 5P-8248
Extension Bolts 4 4F-3658
13.5" Radius 6' 4D-5820 1
16.25" Radius 6' 8W-5265 1
Wear Protection Moldboard Plate
13.5" Radius 7' 4D-5821 1
16.25" Radius 7' 8W-5266 1
4
1
3/4" Bolt Holes - requires special bolts 452-8225 Front Notched
5
2
Used on 120H, 135H Rear Notched
3
Used on 12H, 140H, 143H, 14H, 160H, 163H
14' Blades
5/8" Bolt Holes
Machine 120H, 12H, 135H, 140H, 143H
Models
Rippers / Scarifiers
Shanks Tips
Adapter Size Pin Retainer Misc
Type Part Number Type Std A.R.M.
Centerline 1U-3202
Rear Mount
Straight 8J-5299 Penetration 1U-3209 8E-6208 6E-6209
J2002 Did you know?
Edges with 5/8" bolt holes Sharp 9W-8209
Rear Mount Straight 9J-6586 can be used with 3/4" Penetration 6Y-0309 168-1309 Repair Nose
136-8308 114-0359
R3003 Curved 9J-8913 moldboards. Sharp 9W-7309 8E-7300
Scarifier Standard 195-7218 Use bushings: General Purpose 195-7234
V-Block4 Long 7D-4501 7/8" - 280-4070 High Temp 6Y-5230 143-3074 Tip Removal Tool
1" - 280-4071 5K-1459 5K-1458
Scarifier Standard 195-7219 General Purpose 195-7234 6B-3260
Straight Block5 Long High Temp 6Y-5230 143-3074
Hardware and Wear Protection
Type Application Hardware Quantity Bolts Nuts Washers Notes
Standard Edges Bolts 5/8-11 x 2-1/4 30 3F-5108 Inspect moldboard for excess wear
Rotating Bits Bolts 3/4-10 x 2-3/4 28 4F-3657 Ensure moldboard and new edges
Bolts 30 452-8225 4K-0367 5P-8247 are free from paint and debris.
Specialty1 5/8-11 x 2-3/4 w/ 3/4 head
Torque 5/8" Nuts to 200 +/- 30 ft. lb.
Hardware End Bits Bolts 5/8-11 x 2-1/4 10 3F-5108
Overlays Bolts 3/4-10 x 2-3/4 8 4F-3657
Front Blade Bolts 3/4-10 x 2-1/4 see above 4F-7827 2J-3506 5P-8248
Extension Bolts 4 4F-3658
13.5" Radius 4D-5821 2
Wear Protection Moldboard Plate
16.25" Radius 8W-5266 2
4
1
3/4" Bolt Holes - requires special bolts 452-8225 Front Notched
5
2
Used on 120H, 135H Rear Notched
3
Used on 12H, 140H, 143H 6
12" Bolt Hole Spacing
14' Blades
3/4" Bolt Holes
Machine 140H, 14H, 143H, 160H, 163H, 120K, 120M
Models 12K, 12M, 140K, 140M, 160K, 160M, 12M, 14M
Moldboard Cutting Edges
Width Thickness
Profile Type Length Qty Hardware End Bits Hardware Overlay Hardware
Tooth X Gap (mm) 16mm 19mm 25mm 35mm
6" 9J-3658
Standard
8" 15 7D-1158 7D-1577 4T-2233
4Z-8785 8E-5529 6Y-2805 4
6"
High Carbon 7T-1626
Curved 7' 2 9
8" 7T-1624 7T-1625
8" - 36X25 283-1068
350-7201
Serrated 8" - 51X26 15 350-7200 5 N/A N/A
311-7674
8" - 62X40 217-4833
8" 4T-2970 4T-3032 7T-3494
Standard 10" 4T-6508 4T-8316
Flat 11" 7' 2 15 140-6790 N/A N/A
8" - 51X26 350-0180
Serrated
10" - 56X33 4Z-8055 4Z-8346
Carbide Edges
2' 4 5 208-8863
4.75" 135-9369 4
Tungsten 3' 2 7 217-4698 8E-5529
Carbide 3' 2 7 217-4699
Curved 6.75" 135-9370 4
4' 2 9 208-8866
5
Tung. Carbide 6.75" - 62X40 2' 4 5 208-8865
Serrated 6.75" - 62X40 3' 2 7 217-4697
Carbide 3' 5 330-9491
Flat 6" 2
Insert 4' 6 286-3148
Specialty
Adapter Bits per
Type Width Length Qty Hardware Shank Size Bits Notes
Board Board
3' 2 7 307-2613 21
5.9" 7/8" 348-9051
4' 2 9 307-2615 28
Rotating Bit
3' 2 7 323-1251 21
7.2" 1" 322-7295
4' 2 9 321-4272 28
Adapter Bits per Bits
Type Bit Spacing Width Length Qty Hardware Notes
Board Board 15.5mm 23mm 30mm 63.5mm
2' 4 4 428-6758 9
Narrow Gap
3' 2 7 135-9592 13
Mining Bit 7.75" 308-5193 355-1496
2' 4 4 428-6757 7
Wide Gap
3' 2 7 135-9591 10
2' 4 4 428-6747 10
Narrow Gap
3' 2 7 159-0318 15
Grader Bit 7.75" 105-5183 105-5180 6Y-4339 6Y-4340
2' 4 4 428-6746 8
Wide Gap
3' 2 7 159-0313 12
Auxiliary Blade Cutting Edges
Thickness
Profile Type Width Length Qty Hardware Notes
13mm 16mm 19mm 25mm
26" 2 4 4T-3010 uses 3/4" bolts
9 ft Blade 8"
56" 1 9 169-4089
Front Mount 18.2" 2 3 4T-8353
8 ft Blade 8"
Blades 61.3" 1 10 4T-2315
18.2" 2 3 4T-8353
9'7" Foldable 8"
78.8" 1 13 4T-8378
Rippers / Scarifiers
Shanks Tips
Adapter Size Pin Retainer Misc
Type Part Number Type Std A.R.M.
Rear Mount Straight 9J-6586 Penetration 6Y-0309 168-1309 Repair Nose
136-8308 114-0359
R300 Curved 9J-8913 Don't see Sharp 9W-7309 8E-7300
Scarifier Standard 195-7218 what you need? General Purpose 195-7234
V-Block4 Long 7D-4501 Ask about our High Temp 6Y-5230 143-3074 Tip Removal Tool
MAO program. 5K-1459 5K-1458
Scarifier Standard 195-7219 General Purpose 195-7234 6B-3260
Straight Block5 Long High Temp 6Y-5230 143-3074
Hardware and Wear Protection
Type Application Hardware Quantity Bolts Nuts Washers Notes
Standard Edges Bolts 3/4-10 x 2-1/2 30 5J-4773 Inspect moldboard for excess wear
Specialty Bolts 3/4-10 x 2-3/4 30 5J-4771 Ensure moldboard and new edges
End Bits Bolts 3/4-10 x 2-1/2 10 5J-4773 are free from paint and debris.
Hardware 2J-3506 5P-8248
Overlays Bolts 3/4-10 x 3-3/4 8 5F-8933 Torque 3/4" Nuts to 350 +/- 45 ft. lb.
Front Blade Bolts 3/4-10 x 2-1/4 see above 4F-7827
Extension Bolts 3/4-10 x 2-1/4 4 5J-4773
13.5" Radius 4D-5821 2
Wear Protection Moldboard Plate
16.25" Radius 8W-5266 2
4
Front Notched
5
Rear Notched
16' Blades
3/4" Bolt Holes
Machine 160H, 160M, 14H, 14M, 16H, 16M
Models
Rippers / Scarifiers
Shanks Protectors Tips
Adapter Size Pin Retainer Misc
Type Part Number Standard Sharp Type Std A.R.M.
Rear Mount Straight 9J-6586 - - Penetration 6Y-0309 168-1309 Repair Nose
136-8308 114-0359
R3003 Curved 9J-8913 - - Sharp 9W-7309 8E-7300
- Penetration 6Y-0359 159-0356
Pin-On 114-0358 114-0359
Rear Mount - Centerline 6Y-0352 159-0355 Repair Nose
Straight 484-8282 138-0796
R3504 - Penetration 472-0825 - - 8E-7350
CapSure 473-3816
- Centerline 472-0824 - -
Standard 195-7218 General Purpose 195-7234
Scarifier Don't see
V-Block5 Long 7D-4501 what you need? High Temp 6Y-5230 143-3074 Tip Removal Tool
5K-1459 5K-1458
Ask about our 6B-3260
Scarifier Standard 195-7219 MAO program. General Purpose 195-7234
Straight Block6 Long High Temp 6Y-5230 143-3074
Hardware and Wear Protection
Type Application Hardware Quantity Bolts Nuts Washers Notes
Standard Edges3 3/4-10 x 2-1/2 34 5J-4773 Inspect moldboard for excess wear
Ensure moldboard and new edges
Specialty3 160H/M, 14H/M 3/4-10 x 2-3/4 34 5J-4771
are free from paint and debris.
End Bits 3 3/4-10 x 2-1/2 10 5J-4773 Torque 3/4" Nuts to 350 +/- 45 ft. lb.
Standard Edges 3/4-10 x 3-1/8 20 1J-6762
Hardware & Specialty4 3/4-10 x 3-3/4 14 5F-8933 2J-3506 5P-8248
16H/M
4 3/4-10 x 3-1/8 4 1J-6762
End Bits 3/4-10 x 3-3/4 6 5F-8933
Overlays 3/4-10 x 3-3/4 8 5F-8933
Front Blade 160H/M, 14H/M 3/4-10 x 2-1/4 see above 4F-7827
Extension 3/4-10 x 2-1/4 4 5J-4773
Wear Protection Moldboard Plate 16.25" Radius 385-6748 2
1
Used on 160H, 160M 5
Front Notched
3
Used on 160H, 160M, 14H, 14M 6
Rear Notched
4
Used on 16H, 16M 7
Single Bevel
18' Blades
3/4" Bolt Holes
Machine 18M
Models
Bolts
1-8 x 4-1/2 10 1J-3527 Torque 1" nuts to 850 +/- 110 ft. lb.
Edges 1-8 x 3-1/4 44 4J-9058
Hardware 2J-3507 5P-8250
End Bits Bolts 1-8 x 4-1/2 12 1J-3527
Specialty Bolts 1-8 x 4-1/2 54 1J-3527
Wear Protection Moldboard Plate 21.65" Radius 139-2404 1
MG Cutting Edges
Part Bolt
Number Type Part Name Width Length Thickness Hole Dia Bolt Size Wt. Kg ARM Material Blade
2088863 1C-T EDGE AS-CARB 119.8 609.6 19 21 3/4" 9.80 NO EXCESS NO EXCESS
2088862 1C-T EDGE AS-CARB 119.8 914.4 19 18 5/8" 14.90 NO EXCESS NO EXCESS
2174698 1C-T EDGE AS-CARB 119.8 914.4 19 21 3/4" 14.90 N N
2862057 1F-CI EDGE AS 127 908.4 22 18 5/8" 18.62 N 1E1541C/APPD APRT SNOW PLOW
3490879 1F-CI EDGE AS 127 908.4 22 18 5/8" 19.50 N 1E1541C, APPD PART
3565241 1F-CI EDGE AS 127 908.4 22 18 5/8" 18.63 N 1E1541C, APPD PART SNOW PLOW
1982635 1F-CI EDGE AS 127 914.4 19 18 5/8" 14.60 N PPAP SUP
2831063 1F-CI CUTTING EDGE 127 1213.2 19 21 3/4" 20.91 N APPD PART 12'
2862062 1F-CI EDGE AS 127 1213.2 22 18 5/8" 24.93 N 1E1541C/APPD APRT SNOW PLOW
3490883 1F-CI EDGE AS 127 1213.2 22 18 5/8" 26.10 N 1E1541C, APPD PART
3565242 1F-CI EDGE AS 127 1213.2 22 18 5/8" 24.94 N 1E1541C, APPD PART SNOW PLOW
1982659 1F-CI EDGE AS 127 1219.2 19 18 5/8" 19.50 N PPAP SUP
3518479 1F-CI EDGE AS 127 1518 19 18 5/8" 27.17 N 1E1541C, APPD PART
2174695 1C-T EDGE AS-CARB 151.5 609.6 19 18 5/8" 9.80 N N
1093137 1C CUTTING EDGE 152 607.2 15.9 18 5/8" 14.04 N 1E2197
2322146 1C CUTTING EDGE 152.4 607 15.9 21 3/4" 10.00 N 1E2195
9W1835 1C CUT EDGE 152.4 607.2 15.9 18 5/8" 9.80 N 1E2195
2752478 1F-CI CUTTING EDGE 152.4 908.4 19 18 5/8" 18.74 N APPD PART
3609784 1F-CI EDGE AS 152.4 908.4 19 18 5/8" 18.58 N 1E1541C, APPD PART
3829300 1F-D EDGE AS 152.4 908.4 19 18 5/8" 19.66 N 1E 1541C, APPD PART no top bevel
3309491 1F-CI EDGE AS 152.4 908.4 19 21 3/4" 19.60 N 1E1541C, APPD PART
3750253 1F-CI EDGE AS 152.4 908.4 19 21 3/4" 18.56 N 1E1541C, APPD PART
3942429 1F-CI-D EDGE AS-CARB 152.4 911.5 19 18 5/8" 21.67 N 1E1541C,APPD PART no bevel
3548411 1F-CI EDGE AS 152.4 1035.4 19 18 5/8" 22.52 N 1E1541C, APPD PART
2642215 1F-CI EDGE AS 152.4 1213.2 19 18 5/8" 25.07 N PPAP PART
3609782 1F-CI EDGE AS 152.4 1213.2 19 18 5/8" 24.84 N 1E1541C, APPD PART
3829299 1F-D EDGE AS-CARB 152.4 1213.2 19 18 5/8" 25.07 N 1E1541C, APPD PART no top bevel
2863148 1F-CI CUTTING EDGE 152.4 1213.2 19 21 3/4" 25.50 N APPD PART
3992795 1F-CI EDGE AS 152.4 1213.2 19 21 3/4" 24.83 N 1E1541C,APPD PART
3466704 1F-CI EDGE AS 152.4 1213.2 22 18 5/8" 28.73 N 1E1541C, APPD PART TRUCK PLOW
3G8016 1C EDGE 152.4 1216.8 12.7 18 5/8" 15.42 N 1E2394
9W2325 1C-HC CUTTING EDGE 152.4 1216.8 15.9 18 5/8" 23.15 N 1E2695
9W2326 1C-HC CUTTING EDGE 152.4 1216.8 15.9 21 3/4" 23.15 N 1E2695
3739282 1F-CI-D EDGE AS 152.4 1219.2 19 18 5/8" 29.02 N 1E1541C, APPD PART no top bevel
3888957 1F-CI EDGE AS 152.4 1518 19 18 5/8" 32.92 N 1E1541C,APPD PART
3992794 1F-CI EDGE AS 152.4 1518 19 21 3/4" 31.08 N 1E1541C,APPD PART
3565781 1C CUTTING EDGE 152.4 1518 19.1 18 5/8" 32.00 N 1E0679
9J3862 1C CUTTING EDGE 152.4 1521.6 12.7 18 5/8" 19.32 N 1E2394
9W2295 1C-HC CUTTING EDGE 152.4 1521.6 12.7 18 5/8" 23.15 N 1E2693
7D4508 1C CUTTING EDGE 152.4 1521.6 15.9 18 5/8" 24.50 N 1E2195
7T1640 1C-HC CUTTING EDGE 152.4 1521.6 15.9 18 5/8" 24.46 N 1E2695
3942428 1F-CI-D EDGE AS-CARB 152.4 1521.6 19 18 5/8" 36.27 N 1E1541C,APPD PART no bevel
3G7966 1C EDGE 152.4 1521.6 19 18 5/8" 26.40 N 1E2196
3147608 1C CUTTING EDGE 152.4 1822.8 19.1 18 5/8" 38.44 N 1E0679
8D2786 1C CUTTING-EDGE 152.4 1826.4 12.7 18 5/8" 23.49 N 1E2394 12', 13'
9W2297 1C-HC CUTTING EDGE 152.4 1826.4 12.7 18 5/8" 27.80 N 1E2693 12', 13'
5D9553 1C EDGE 152.4 1826.4 15.9 18 5/8" 29.93 N 1E2195 12'
7T1633 1C-HC CUTTING EDGE 152.4 1826.4 15.9 18 5/8" 29.33 N 1E2695 12', 13'
7T1637 1C-HC CUTTING EDGE 152.4 1826.4 15.9 21 3/4" 29.22 N 1E2695 12'
9J3657 1C CUTTING EDGE 152.4 1826.4 15.9 21 3/4" 29.50 N 1E2195 12'
5D9556 1C EDGE 152.4 1826.4 19 18 5/8" 35.38 N 1E2195 12'
3170995 1C CUTTING EDGE 152.4 2127.6 19.1 18 5/8" 44.88 N 1E0679
8D2787 1C CUTTING-EDGE 152.4 2131.2 12.7 18 5/8" 26.30 N 1E2394 13'
9W2299 1C-HC CUTTING EDGE 152.4 2131.2 12.7 18 5/8" 32.50 N 1E2693
9J3659 1C CUTTING EDGE 152.4 2131.2 12.7 21 3/4" 2.72 N 1E2394
9W2300 1C-HC CUTTING EDGE 152.4 2131.2 12.7 21 3/4" 32.50 N 1E2693
5D9554 1C EDGE 152.4 2131.2 15.9 18 5/8" 34.50 N 1E2195 14'
7T1645 1C-HC CUTTING EDGE 152.4 2131.2 15.9 18 5/8" 34.92 N 1E2695 13', 14'
7T1626 1C-HC CUTTING EDGE 152.4 2131.2 15.9 21 3/4" 34.12 N 1E2695 14'
9J3658 1C CUTTING EDGE 152.4 2131.2 15.9 21 3/4" 34.00 N 1E2195 14'
5D9557 1C EDGE 152.4 2131.2 19 18 5/8" 41.73 N 1E2195 14'
4Z8785 1C-HC EDGE 152.4 2131.2 19 21 3/4" 41.70 N 1E2196
8J7782 1C EDGE 152.4 2436 12.7 18 5/8" 29.48 N 1E2394
9W2301 1C-HC CUTTING EDGE 152.4 2436 12.7 18 5/8" 37.00 N 1E2693
9J3656 1C EDGE 152.4 2436 12.7 21 3/4" 31.75 N 1E2394
9W2302 1C-HC CUTTING EDGE 152.4 2436 12.7 21 3/4" 37.00 N 1E2693
7T1632 1C-HC CUTTING EDGE 152.4 2436 15.9 18 5/8" 39.18 N 1E2695
8J4043 1C EDGE 152.4 2436 15.9 18 5/8" 39.50 N 1E2195
9J3655 1C CUTTING EDGE 152.4 2436 15.9 21 3/4" 39.50 N 1E2195
3887243 1F-D CUTTING EDGE 152.4 2436 19 18 5/8" 54.65 N 1E1996 no bevel
4Z8968 1C-HC EDGE 152.4 2740.8 12.7 18 5/8" 353.50 NO EXCESS 1E2693
MG Cutting Edges
Part Bolt
Number Type Part Name Width Length Thickness Hole Dia Bolt Size Wt. Kg ARM Material Blade
9W2303 1C-HC CUTTING EDGE 152.4 3045.6 12.7 18 5/8" 46.35 N 1E2693
9W2304 1C-HC CUTTING EDGE 152.4 3045.6 12.7 21 3/4" 46.35 N 1E2693
9W2305 1C-HC CUTTING EDGE 152.4 3655.2 12.7 18 5/8" 55.60 N 1E2693
9W2307 1C-HC CUTTING EDGE 152.4 4264.8 12.7 18 5/8" 64.85 N 1E2693
2088864 1C-T EDGE AS-CARB 170.2 609.6 25.4 18 5/8" 17.01 NO EXCESS NO EXCESS
2088865 2C-T EDGE AS-CARB 170.2 609.6 25.4 21 3/4" 17.01 NO EXCESS NO EXCESS
2174696 2C-T EDGE AS-CARB 170.2 914.4 25.4 18 5/8" 25.75 N N
2174697 2C-T EDGE AS-CARB 170.2 914.4 25.4 21 3/4" 25.70 N N
1957265 1C-T EDGE AS 172 609.6 19 18 5/8" 14.90 N N
1957266 1C-T EDGE AS 172 609.6 19 21 3/4" 14.81 N N 12'
1957264 1C-T EDGE AS 172 914 19 18 5/8" 22.40 N N
1957267 1C-T EDGE AS 172 914.4 19 21 3/4" 22.30 N N 12'
2174699 1C-T EDGE AS-CARB 172 914.4 19 21 3/4" 22.52 N N
2088866 1C-T EDGE AS-CARB 172 1219.2 19 21 3/4" 30.10 NO EXCESS NO EXCESS
1073430 1F CUTTING EDGE 202.9 3350.1 19 18 5/8" 93.37 NO EXCESS NO EXCESS
1321011 1F EDGE 202.9 3655.1 15.9 18 5/8" 83.42 N 1E0427
7T3600 2F CUTTING EDGE 203 1216.8 25.4 21 3/4" 37.00 N 1E2563 12'
7T3497 1F CUTTING EDGE 203 1521.6 25.4 18 5/8" 61.70 N 1E2563
7T3601 2F CUTTING EDGE 203 1521.6 25.4 21 3/4" 46.30 N 1E2563
3691483 1F-D CUTTING EDGE 203 1522.6 19 18 5/8" 45.64 N 1E1996 no bevel
3147609 1C-D CUTTING EDGE 203 1822.8 18.7 18 5/8" 52.71 N 1E0679 SNOW PLOW
7T3499 1F CUTTING EDGE 203 1826.4 25.4 18 5/8" 74.00 N 1E2563 12', 13'
7T3493 1F CUTTING EDGE 203 1826.4 25.4 21 3/4" 74.00 N 1E2563 12'
3691481 1F-D CUTTING EDGE 203 1827.4 19 18 5/8" 54.65 N 1E1996 no bevel
7T3498 1F CUTTING EDGE 203 2131.2 25.4 18 5/8" 78.90 N 1E2563 13' 14'
7T3494 1F CUTTING EDGE 203 2131.2 25.4 21 3/4" 89.60 N 1E2563 14'
3691488 1F-D CUTTING EDGE 203 2132.2 19 18 5/8" 63.95 N 1E1996 no bevel
7T3496 1F CUTTING EDGE 203 2436 25.4 18 5/8" 98.70 N 1E2563
7T3495 1F CUTTING EDGE 203 2436 25.4 21 3/4" 93.00 N 1E2563 16'
3691482 1F-D CUTTING EDGE 203 2437 19 18 5/8" 72.97 N 1E1996 no bevel
3840961 1F-D CUTTING EDGE 203 2741 19 18 5/8" 82.19 N 1E1996 no bevel
3779854 1F-D CUTTING EDGE 203 3351.4 19 18 5/8" 100.50 N 1E1995 no bevel
3G2166 1C EDGE CUTTING 203.2 607.2 15.9 21 3/4" 13.88 N 1E2197
6G8623 1C EDGE-CUTTING 203.2 607.2 19 18 5/8" 16.46 N 1E2198
3G2165 1C EDGE CUTTING 203.2 607.2 19 21 3/4" 16.78 N 1E2198
3466329 1F-CI EDGE AS 203.2 908.4 22 18 5/8" 29.44 N 1E1541C, APPD PART TRUCK PLOW
2642204 2C CUTTING EDGE 203.2 908.4 25.4 21 3/4" 29.70 N 1E2565
3992792 2C EDGE-CUTTING 203.2 908.4 25.4 21 3/4" 27.24 N 1E2565
4Z8129 1F EDGE-CUSTOM 203.2 911.4 19 18 5/8" 25.40 NO EXCESS 1E0471
2530215 1C EDGE-CUTTING 203.2 911.5 25.1 21 3/4" 34.40 N 1E2565 12'
2530217 2C CUTTING EDGE-SERRATED 203.2 911.5 25.4 21 3/4" 26.53 N 1E2565 12'
1957260 1F-T EDGE AS 203.2 912 19 18 5/8" 22.19 N N
3992789 2C EDGE-CUTTING 203.2 1213.2 19 18 5/8" 26.31 N 1E2198
3117676 2C CUTTING EDGE 203.2 1213.2 19 28 1" 25.11 N 1E2198
3466328 1F-CI EDGE AS 203.2 1213.2 22 18 5/8" 39.36 N 1E1541C, APPD PART TRUCK PLOW
3117677 2C CUTTING EDGE 203.2 1213.2 25.4 18 5/8" 33.89 N 1E2565
2741360 2C CUTTING EDGE 203.2 1213.2 25.4 21 3/4" 39.73 N 1E2565
4Z8119 1F EDGE-CUSTOM 203.2 1216.3 19 18 5/8" 33.95 NO EXCESS 1E0471
1359692 1F CUTTING EDGE 203.2 1216.7 25.4 18 5/8" 45.70 N 1E2563
3G7965 1C EDGE 203.2 1216.8 12.7 18 5/8" 22.68 N 1E2395
9W2309 1C-HC EDGE CUTTING 203.2 1216.8 12.7 18 5/8" 21.96 N 1E2694
1356738 1C CUTTING EDGE 203.2 1216.8 12.7 21 3/4" 22.68 N 1E2395
1321088 1C EDGE AS 203.2 1216.8 15.9 18 5/8" 28.22 N 1E2197
1341773 1C CUTTING EDGE 203.2 1216.8 15.9 21 3/4" 27.85 N 1E2197
9W2329 1C-HC CUTTING EDGE 203.2 1216.8 15.9 21 3/4" 30.90 N 1E2697
1321087 2C CUTTING EDGE 203.2 1216.8 19 18 5/8" 28.20 N 1E2198
1957262 1F-T EDGE AS 203.2 1216.8 19 18 5/8" 29.60 N N
8D3428 2C EDGE 203.2 1216.8 19 18 5/8" 24.95 N 1E2198
1093124 1C CUTTING EDGE 203.2 1216.8 19 21 3/4" 34.03 N 1E2198
8J8255 2C EDGE 203.2 1216.8 19 21 3/4" 23.59 N 1E2198
2530218 2C CUTTING EDGE-SERRATED 203.2 1216.8 25.4 18 5/8" 35.55 N 1E2565
1093150 1C CUTTING EDGE 203.2 1216.8 25.4 21 3/4" 45.91 N 1E2565
2174819 2C EDGE 203.2 1216.8 25.4 21 3/4" 35.00 N 1E2565
4T3512 2C CUTTING EDGE 203.2 1216.8 25.4 21 3/4" 39.85 N 1E2565
3520648 1F CUTTING EDGE 203.2 1518 18.7 18 5/8" 43.89 N 1E0679
3507193 2F CUTTING EDGE 203.2 1518 19 18 5/8" 31.80 N 1E0471
4Z8120 1F EDGE-CUTTING 203.2 1521 15.9 21 3/4" 35.27 N 1E0427
4T3511 2C CUTTING EDGE 203.2 1521.1 25.4 21 3/4" 49.80 N 1E2565
3463285 1C CUTTING EDGE 203.2 1521.3 15.9 21 3/4" 35.09 N 1E2197
9J3863 1C CUTTING EDGE 203.2 1521.6 12.7 18 5/8" 27.76 N 1E2395
9W2311 1C-HC EDGE CUTTING 203.2 1521.6 12.7 18 5/8" 26.50 N 1E2694
MG Cutting Edges
Part Bolt
Number Type Part Name Width Length Thickness Hole Dia Bolt Size Wt. Kg ARM Material Blade
1341779 1C CUTTING EDGE 203.2 1521.6 12.7 21 3/4" 24.48 N 1E2395
9W2312 1C-HC EDGE CUTTING 203.2 1521.6 12.7 21 3/4" 27.40 N 1E2694
7D4509 1C CUTTING EDGE 203.2 1521.6 15.9 18 5/8" 35.40 N 1E2197
7T1641 1C-HC CUTTING EDGE 203.2 1521.6 15.9 18 5/8" 34.01 N 1E2697
9W2330 1C-HC CUTTING EDGE 203.2 1521.6 15.9 21 3/4" 38.60 N 1E2697
4T2967 1F CUTTING EDGE 203.2 1521.6 16 18 5/8" 35.10 N 1E0427
4T3034 1F CUTTING EDGE 203.2 1521.6 19 18 5/8" 42.50 N 1E0471
8D3429 2C EDGE 203.2 1521.6 19 18 5/8" 28.12 N 1E2198
9W6252 1C CUTTING EDGE 203.2 1521.6 19 18 5/8" 46.25 N 1E2198
4Z8131 1C EDGE-CUTTING 203.2 1521.6 19 21 3/4" 43.09 NO EXCESS 1E2198 Reinstated
8J8256 2C EDGE 203.2 1521.6 19 21 3/4" 28.12 N 1E2198
9W2341 1C-HC EDGE CUTTING 203.2 1521.6 19 21 3/4" 43.54 N 1E2698
4T2240 1C CUTTING EDGE 203.2 1521.6 25.4 18 5/8" 55.40 N 1E2565
3117678 2C CUTTING EDGE 203.2 1822.8 19 18 5/8" 37.74 N 1E2198 12'
3500179 2F EDGE-CUTTING 203.2 1822.8 19 18 5/8" 43.32 N 1E0471 12'
4202054 1F EDGE CUTTING 203.2 1822.8 19 18 5/8" 56.00 Y 1E0471 12'
3992791 2C EDGE-CUTTING 203.2 1822.8 19 21 3/4" 44.52 N 1E2198
3992793 2C EDGE-CUTTING 203.2 1822.8 19 21 3/4" 40.14 N 1E2198
8D2788 1C CUTTING-EDGE 203.2 1826.4 12.7 18 5/8" 41.73 N 1E2395 12', 13'
9W2313 1C-HC EDGE CUTTING 203.2 1826.4 12.7 18 5/8" 33.64 N 1E2694 12', 13'
5D9562 1C CUTTING EDGE 203.2 1826.4 15.9 18 5/8" 48.20 N 1E2197 12', 13'
7T1636 1C-HC CUTTING EDGE 203.2 1826.4 15.9 18 5/8" 41.90 N 1E2697 12', 13'
7T1639 1C-HC CUTTING EDGE 203.2 1826.4 15.9 21 3/4" 41.79 N 1E2697 12'
9J7701 1C EDGE 203.2 1826.4 15.9 21 3/4" 42.30 N 1E2197 12'
4T2968 1F CUTTING EDGE 203.2 1826.4 16 18 5/8" 42.10 N 1E0427 12', 13'
4T2971 1F CUTTING EDGE 203.2 1826.4 16 21 3/4" 42.10 N 1E0427 12'
1321072 2C EDGE 203.2 1826.4 19 18 5/8" 37.54 N 1E2198 12', 13'
2174815 2C EDGE 203.2 1826.4 19 18 5/8" 44.70 N 1E2198 12', 13'
2174832 2C EDGE 203.2 1826.4 19 18 5/8" 39.80 N 1E2198 12'
5D9558 1C EDGE 203.2 1826.4 19 18 5/8" 50.34 N 1E2195 12', 13'
7T1634 1C-HC CUTTING EDGE 203.2 1826.4 19 18 5/8" 51.92 N 1E2698 12'
4T3033 1F CUTTING EDGE 203.2 1826.4 19 21 3/4" 52.16 N 1E0471 12'
7D1576 1C CUTTING EDGE 203.2 1826.4 19 21 3/4" 46.72 N 1E2198 12'
7T1638 1C-HC CUTTING EDGE 203.2 1826.4 19 21 3/4" 51.78 N 1E2698
5212870 2C EDGE-CUTTING (SERRATED) 203.2 1826.4 25 21 3/4" 53.51 N 1E2565 18'
4T2231 1C CUTTING EDGE 203.2 1826.4 25.4 21 3/4" 65.90 N 1E2565 12'
4T3007 1F CUTTING EDGE 203.2 1826.9 19 18 5/8" 53.52 ARM 3500179 1E0471 12', 13'
4T2244 1C CUTTING EDGE 203.2 1826.9 25.4 18 5/8" 68.20 N 1E2565 12', 13'
3332818 1F CUTTING EDGE 203.2 2127.6 18.7 18 5/8" 61.54 N 1E0679
2862058 1F CUTTING EDGE ARM 203.2 2127.6 19 18 5/8" 66.76 BASE? 1E0471
2831068 2C CUTTING EDGE 203.2 2127.6 19 21 3/4" 45.56 BASE 7D1577 1E2198 14'
2862016 2C CUTTING EDGE 203.2 2127.6 19 21 3/4" 47.05 BASE 7D1577 1E2198 14'
3500180 2F CUTTING EDGE 203.2 2127.6 19 21 3/4" 49.16 N 1E0471 14'
3992788 2C EDGE-CUTTING 203.2 2127.6 19 21 3/4" 51.97 N 1E2198
3507200 2C CUTTING EDGE 203.2 2127.6 19.1 21 3/4" 49.37 BASE 7D1577? 1E2198 14'
3500181 2F CUTTING EDGE 203.2 2127.6 20 18 5/8" 49.36 BASE 4T3036? 1E0471 13', 14'
2743709 2C CUTTING EDGE 203.2 2127.6 25.4 18 5/8" 69.95 N 1E2565 13', 14'
3992790 2C EDGE-CUTTING 203.2 2127.6 25.4 18 5/8" 70.31 N 1E2565 13', 14'
3117674 2C CUTTING EDGE 203.2 2127.6 25.4 21 3/4" 70.52 N 1E2565 14'
3507201 2C CUTTING EDGE 203.2 2127.6 25.4 21 3/4" 64.70 BASE 4T2233? 1E2565 14'
8D2789 1C CUTTING-EDGE 203.2 2131.2 12.7 18 5/8" 38.20 N 1E2395 13'
9W2315 1C-HC EDGE CUTTING 203.2 2131.2 12.7 18 5/8" 39.09 N 1E2694 13'
3G1627 1C EDGE CUTTING 203.2 2131.2 12.7 21 3/4" 39.46 N 1E2395
9W2316 1C-HC EDGE CUTTING 203.2 2131.2 12.7 21 3/4" 39.09 N 1E2694
5D9561 1C CUTTING EDGE 203.2 2131.2 15.9 18 5/8" 49.50 N 1E2197 13', 14'
7T1643 1C-HC CUTTING EDGE 203.2 2131.2 15.9 18 5/8" 47.71 N 1E2697 13', 14'
7D1158 1C CUTTING EDGE 203.2 2131.2 15.9 21 3/4" 47.49 N 1E2197 14'
7T1624 1C-HC CUTTING EDGE 203.2 2131.2 15.9 21 3/4" 48.77 N 1E2697 14'
4T2969 1F CUTTING EDGE 203.2 2131.2 16 18 5/8" 49.00 N 1E0427 13', 14'
4T2970 1F CUTTING EDGE 203.2 2131.2 16 21 3/4" 49.20 N 1E0427 14'
2174818 2C EDGE 203.2 2131.2 19 18 5/8" 52.20 N 1E2198 14'
2174829 2C EDGE 203.2 2131.2 19 18 5/8" 46.50 N 1E2198 14'
4Z9020 2C EDGE 203.2 2131.2 19 18 5/8" 50.00 N 1E2198 13', 14'
5D9559 1C EDGE 203.2 2131.2 19 18 5/8" 58.06 N 1E2195 13', 14'
7T1623 1C-HC CUTTING EDGE 203.2 2131.2 19 18 5/8" 60.60 N 1E2698 14'
2174820 2C EDGE 203.2 2131.2 19 21 3/4" 45.40 N 1E2198 14'
2174833 2C EDGE 203.2 2131.2 19 21 3/4" 46.30 N 1E2198 14'
4T3032 1F CUTTING EDGE 203.2 2131.2 19 21 3/4" 142.20 N 1E0471 14'
7D1577 1C CUTTING EDGE 203.2 2131.2 19 21 3/4" 58.96 ARM 2831068 1E2198 14'
7T1625 1C-HC CUTTING EDGE 203.2 2131.2 19 21 3/4" 60.44 N 1E2698 14'
2174823 2C EDGE 203.2 2131.2 25.4 18 5/8" 61.60 N 1E2565 13', 14'
MG Cutting Edges
Part Bolt
Number Type Part Name Width Length Thickness Hole Dia Bolt Size Wt. Kg ARM Material Blade
4T2242 1C CUTTING EDGE 203.2 2131.2 25.4 18 5/8" 79.10 N 1E2565 13', 14'
4T2233 1C CUTTING EDGE 203.2 2131.2 25.4 21 3/4" 80.00 N 1E2565 14'
4T3036 1F CUTTING EDGE 203.2 2131.7 19 18 5/8" 59.60 N 1E0471 13', 14'
3170997 1F CUTTING EDGE 203.2 2432.4 18.7 18 5/8" 70.37 N 1E0679
3304427 2C CUTTING EDGE 203.2 2432.4 19.1 21 3/4" 49.93 N 1E2198 16'
3507202 1C CUTTING EDGE 203.2 2432.4 19.1 21 3/4" 56.41 BASE 7D1949? 1E2198 16'
8J8980 1C EDGE 203.2 2436 12.7 18 5/8" 47.17 N 1E2395
9W2317 1C-HC EDGE CUTTING 203.2 2436 12.7 18 5/8" 43.85 N 1E2694
3G1628 1C EDGE CUTTING 203.2 2436 12.7 21 3/4" 42.64 N 1E2395
5D9731 1C CUTTING EDGE 203.2 2436 15.9 18 5/8" 56.40 N 1E2197
7T1631 1C-HC CUTTING EDGE 203.2 2436 15.9 18 5/8" 55.94 N 1E2697
7T1628 1C-HC CUTTING EDGE 203.2 2436 15.9 21 3/4" 55.75 N 1E2697
8J9821 1C EDGE 203.2 2436 15.9 21 3/4" 55.33 N 1E2197
4T2966 1F CUTTING EDGE 203.2 2436 16 18 5/8" 56.20 N 1E0427
4T9603 1F CUTTING EDGE 203.2 2436 16 21 3/4" 56.50 N 1E0427
3731572 1C CUTTING EDGE ARM 203.2 2436 18.7 21 3/4" 72.60 BASE 7D1949/7T1627 1E2198 16'
1321073 2C EDGE 203.2 2436 19 18 5/8" 52.50 N 1E2198
4T3035 1F CUTTING EDGE 203.2 2436 19 18 5/8" 68.13 N 1E0471
5D9732 1C CUTTING EDGE 203.2 2436 19 18 5/8" 56.40 N 1E2198
7T1630 1C-HC CUTTING EDGE 203.2 2436 19 18 5/8" 69.33 N 1E2698
2174810 2C CUTTING EDGE-SERRATED 203.2 2436 19 21 3/4" 59.40 N 1E2198 16'
2174821 2C EDGE 203.2 2436 19 21 3/4" 51.90 N 1E2198 16'
2174834 2C EDGE 203.2 2436 19 21 3/4" 52.90 N 1E2198 16'
4T3037 1F CUTTING EDGE 203.2 2436 19 21 3/4" 68.13 N 1E0471 16'
7D1949 1C CUTTING EDGE 203.2 2436 19 21 3/4" 68.03 ARM 3731572 1E2198 16'
7T1627 1C-HC CUTTING EDGE 203.2 2436 19 21 3/4" 69.10 N 1E2698 16'
4T2237 1C CUTTING EDGE 203.2 2436 25.4 18 5/8" 90.40 N 1E2565
2174827 2C EDGE 203.2 2436 25.4 21 3/4" 71.50 N 1E2565 16'
3759887 1C CUTTING EDGE ARM 203.2 2436 25.4 21 3/4" 97.00 BASE 4T2236 1E2565 16'
4T2236 1C CUTTING EDGE 203.2 2436 25.4 21 3/4" 88.60 ARM 3759887 1E2565 16'
1359367 1F EDGE 203.2 2740.7 19 18 5/8" 76.20 N 1E0471
1957269 1F CUTTING EDGE 203.2 2740.8 19 18 5/8" 77.30 N 1E2198
1092699 1F CUTTING EDGE 203.2 3045.5 15.9 18 5/8" 70.28 N 1E0427
1359368 1F EDGE 203.2 3045.5 19 18 5/8" 84.82 N 1E0471
9W2319 1C-HC EDGE CUTTING 203.2 3045.6 12.7 18 5/8" 54.82 N 1E2694
1219503 1F CUTTING EDGE 203.2 3349.3 19 18 5/8" 93.84 NO EXCESS NO EXCESS
1092698 1F CUTTING EDGE 203.2 3350.3 15.9 18 5/8" 77.32 N 1E0427
1406828 1F CUTTING EDGE 203.2 3350.3 19 18 5/8" 93.80 N 1E0471
3277082 1F CUTTING EDGE 203.2 3655.2 16 18 5/8" 85.04 N 1E0427
1073431 1F CUTTING EDGE 203.2 3655.3 19 18 5/8" 102.40 NO EXCESS NO EXCESS
4T8800 2F CUTTING EDGE 254 1216.8 25 21 3/4" 45.50 N 1E0468
4T8801 2F CUTTING EDGE 254 1521.6 25 21 3/4" 56.90 N 1E0468
4T6502 1F CUTTING EDGE 254 1826.4 25 21 3/4" 89.90 N 1E0468
5212874 2F EDGE-CUTTING (SERRATED) 254 1826.4 35 21 3/4" 93.13 N 1E1432 18'
5212871 1F EDGE CUTTING 254 1826.4 45 21 3/4" 154.80 N 1E1648 18'
5212875 2F EDGE-CUTTING (SERRATED) 254 1826.4 45 21 3/4" 124.70 N 1E1648 18'
4T6508 1F CUTTING EDGE 254 2131.2 25 21 3/4" 105.00 N 1E0468 14'
4T8316 1F CUTTING EDGE 254 2131.2 35 21 3/4" 139.40 N 1E1432 14'
4Z8055 2F EDGE CUTTING 254 2131.3 25 21 3/4" 77.57 N 1E0468 14'
4Z8346 2F EDGE CUTTING 254 2131.3 35 21 3/4" 114.10 NO EXCESS NO EXCESS 14'
3500182 2F CUTTING EDGE 254 2432.4 35 21 3/4" 118.60 BASE 4T8317? 1E1432 16'
3500183 2F CUTTING EDGE 254 2432.4 35 21 3/4" 119.20 BASE 4T8317? 1E1432 16'
3500184 2F CUTTING EDGE 254 2432.4 35 21 3/4" 117.40 BASE 4T8317? 1E1432 16'
3573123 2F CUTTING EDGE 254 2432.4 45 21 3/4" 166.00 N 1E1648 16'
1957177 1F CUTTING EDGE ARM 254 2435.9 25 21 3/4" 117.40 BASE 4T6511 1E0468 16'
4Z8056 2F EDGE CUTTING 254 2435.9 25 21 3/4" 95.26 NO EXCESS NO EXCESS 16'
4T6511 1F CUTTING EDGE 254 2436 25 21 3/4" 120.00 ARM 3534363 1E0468 16'
1004581 2F EDGE 254 2436 35 21 3/4" 130.60 N 1E1432 16'
2530198 2F CUTTING EDGE 254 2436 35 21 3/4" 119.60 N 1E1432 16'
4T8317 1F CUTTING EDGE 254 2436 35 21 3/4" 159.40 N 1E1432 16'
1043628 1F EDGE 254 2436 45 21 3/4" 206.60 N 1E1648 16'
1043631 2F EDGE 254 2436 45 21 3/4" 165.90 N 1E1648 16'
1406790 1F CUTTING EDGE 280 2131.2 25 21 3/4" 100.60 N 1E1169 14'
1406832 1F-S CUTTING EDGE 280 2436 25 21 3/4" 129.40 N 1E4062 16'
1321086 1F CUTTING EDGE 280 2436 35 21 3/4" 167.10 N 1E1662 16'
4Z9188 1F CUTTING EDGE 305 2436 35 21 3/4" 167.10 NO EXCESS NO EXCESS 16'
1093117 1F CUTTING EDGE 330 1216.8 28.5 28 1" 83.40 N 1E2112 24'
1093116 1F CUTTING EDGE 330 1216.8 45 28 1" 133.30 N 1E1570 24'
1386542 2F CUTTING EDGE-SERRATED 330 1216.8 45 28 1" 95.88 0 1E1570 24'
1321019 1F CUTTING EDGE 330 1216.8 60 28 1" 178.90 N 1E1932 24'
1324753 2F CUTTING EDGE 330 1216.8 60 28 1" 144.80 N 1E1932 24'
MG Cutting Edges
Part Bolt
Number Type Part Name Width Length Thickness Hole Dia Bolt Size Wt. Kg ARM Material Blade
5212872 1F EDGE-CUTTING 330 1826.4 35 21 3/4" 156.30 N 1E2145 18'
5212873 1F EDGE-CUTTING 330 1826.4 45 21 3/4" 202.60 N 1E1570 18'
1282577 1F CUTTING EDGE 330 2436 45 21 3/4" 270.40 N 1E1570 16'
1341778 2F CUTTING EDGE 330 2436 45 21 3/4" 235.20 N 1E1570 16'
3555144 1F-B EDGE AS 390.2 1216.8 60 - - 218.50 N 1E1541C
3655079 2F CUTTING EDGE 406 1216.7 60 28 1" 178.50 N 1E1630 24'
1359690 1F CUTTING EDGE 406 1216.8 28.5 28 1" 102.00 N 1E0540 24'
1386440 1F CUTTING EDGE 406 1216.8 45 28 1" 163.80 ARM 3648007 1E1569 24'
1359349 1F CUTTING EDGE 406 1216.8 60 28 1" 222.40 N 1E1630 24'
1359796 2F CUTTING EDGE 406 1216.8 60 28 1" 186.70 N 1E1630 24'
2862022 1F-L EDGE-CUTTING (LEAN) (ARM) 406 1216.8 60 28 1" 231.10 BASE 1784106 1E1630 24'
3560889 2F CUTTING EDGE 406 1216.8 60 28 1" 171.70 N 1E1630 24'
3762335 2F CUTTING EDGE 406 1216.8 60 28 1" 181.40 N 1E1630 24'
1359576 1F CUTTING EDGE 406 1216.8 75 28 1" 276.90 N 1E2831 24'
1359797 2F CUTTING EDGE 406 1216.8 75 28 1" 231.90 N 1E2831 24'
1380675 2F EDGE-CUTTING (SERRATED) 406 1216.8 75 28 1" 244.40 N 1E2831 24'
4247737 2F EDGE-CUTTING 406 2436 75 28 1" 423.90 N 1E2831 24'
4158009 KIT INSTALLATION 1016 1219 238 - - 252.50 N N
4158006 KIT INSTALLATION 1016 1219 485 - - 1019.00 N N
4158008 KIT INSTALLATION 1016 1219 485 - - 1323.00 N N
1 Standard
2 Serrated
C Curved
F Flat
CI Carbide Insert
T Tungsten Carbide
HC High Carbon
S Single Bevel
L Lean
B Chocky Bars
D Other Shape
93
HYDRAULIC
EXCAVATORS
94
Cat® HEX K Series Tip Options
» Extra Duty and Extra Duty Abrasion Resistant Material
(A.R.M.)* tips include approximately 60% more wear material in
the tip body. The A.R.M. wears around the profile to increase
penetration.
» Wide tips are used to maintain smooth trench floors and in low-
abrasion, easy-to-penetrate material.
» Double Spike tips are used in the corner positions with the
spike tips for hard-to-penetrate, fracturable materials
95
315D, 316E/F, 318C/E/F, 319D, 320E/F,
321D, 323F, M322D/F
Bucket Edge Thickness 36mm
K80 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 220-9084 36 151 211 22.5 90 11.6 8.5
RH 2 Strap Corner (0 degrees) 229-7085 36 125 204 22.5 92 11.6 7.7
LH 2 Strap Corner (0 degrees) 229-7086 36 125 204 22.5 92 11.6 7.7
RH 2 Strap Corner (4 degrees) 220-9085 36 126 203 22.5 92 11.6 7.9
LH 2 Strap Corner (4 degrees) 220-9086 36 126 203 22.5 92 11.6 7.9
RH 2 Strap Corner (5 degrees) 232-2085 36 124 202 22.5 109 11.6 10.3
LH 2 Strap Corner (5 degrees) 232-2086 36 124 202 22.5 109 11.6 10.3
K80 Tips
Dimensions (mm) Weight
Type Part Number Retainer Notes
A B C (lbs)
Specialty
Extra Duty Long Life The black areas in the pictures of the tips is where the ARM will be
475-5477 268 92 80 13.9 applied.
(ARM)
96
315D, 316E/F, 318E/F, 320E/F, 321D,
323F, M322D/F, 324E, 326F, 328D,
329E/F, 330F
Bucket Edge Thickness 40mm
K90 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 220-9094 40 192 234 22.5 99 10 24.9
RH 2 Strap Corner (0 degrees) 223-8095 40 138 223 22.5 99 10 22.9
LH 2 Strap Corner (0 degrees) 223-8096 40 138 223 22.5 99 10 22.9
RH 2 Strap Corner (4 degrees) 220-9095 40 138 226 22.5 99 10 22.9
LH 2 Strap Corner (4 degrees) 220-9096 40 138 226 22.5 99 10 22.9
RH 2 Strap Corner (5 degrees) 232-2095 40 130 215 22.5 123 10 28.9
LH 2 Strap Corner (5 degrees) 232-2096 40 130 215 22.5 123 10 28.9
K90 Tips
Dimensions (mm) Weight
Type Part Number Retainer Notes
A B C (lbs)
Specialty
Extra Duty Long Life The black areas in the pictures of the tips is where the ARM will be
475-5488 279 99 90 17.9 applied.
(ARM)
97
324E, 326F, 328D, 329E/F, 330F,
336E/F, 324E-ME, 326F-ME, 329E/F-
ME
Bucket Edge Thickness 45mm
K100 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 220-9104 45 187 238 22.5 110 10 30.0
RH 2 Strap Corner (0 degrees) 232-0105 45 148 228 22.5 110 10 26.7
LH 2 Strap Corner (0 degrees) 232-0106 45 148 228 22.5 110 10 26.7
RH 2 Strap Corner (4 degrees) 220-9105 45 148 227 22.5 110 10 27.3
LH 2 Strap Corner (4 degrees) 220-9106 45 148 227 22.5 110 10 27.3
RH 2 Strap Corner (5 degrees) 232-2105 45 145 224 22.5 135 10 35.0
LH 2 Strap Corner (5 degrees) 232-2106 45 145 224 22.5 135 10 35.0
K100 Tips
Dimensions (mm) Weight
Type Part Number Retainer Notes
A B C (lbs)
Specialty
Extra Duty Long Life The black areas in the pictures of the tips is where the ARM will be
475-5501 309 110 96 26.0 applied.
(ARM)
98
336E/F, 324E-ME, 326F-ME, 329E/F-
ME, 352F, 349E/F, 336E/F-ME
Bucket Edge Thickness 60mm
K110 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 469-4311 60 241 294 22.5 120 9 49.1
RH 2 Strap Corner (4 degrees) 469-4314 60 241 294 22.5 120 9 46.3
LH 2 Strap Corner (4 degrees) 469-4315 60 241 294 22.5 120 9 46.3
RH 2 Strap Corner (5 degrees) 469-4312 60 236 289 22.5 152 9 56.0
LH 2 Strap Corner (5 degrees) 469-4313 60 236 289 22.5 152 9 56.0
K110 Tips
Dimensions (mm) Weight Retainer /
Type Part Number Notes
A B C (lbs) Slag Retainer
286-2110 /
Penetration Plus 467-9823 346 125 110 36.3
309-1119
Specialty
Extra Duty Long Life The black areas in the pictures of the tips is where the ARM will be
472-7763 346 126 110 39.2 applied.
(ARM) 286-2110 /
Penetration Long Life 309-1119
472-7764 319 49 110 23.6
(ARM)
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 320-336 329-5958 N/A N/A N/A 132-0999/275-5982 2 Hex Sidebar Protector uses shear block 330-2174.
HEX Sidebar Protector 345-385 326-3407 N/A N/A N/A 132-0999/132-0998 2
GP Sidecutter, RH 7Y-0357
320-336 6I-6371 2J-3507 N/A N/A 6
GP Sidecutter, LH 7Y-0358
HD Sidecutter, RH 357-2696
320-336 6I-6371 2J-3507 3K-5234 N/A 8
HD Sidecutter, LH 357-2697
HD Sidecutter, RH 326-3405
345-385 1D-4637 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9812 55 11.5
324, 336, 345 60mm 22.5°
459-9814 70 14.5
99
352F, 349E/F, 336E/F-ME, 345D-ME,
349F-ME
Bucket Edge Thickness 70mm
K130 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 469-4316 70 299 360 22.5 170 9 81.5
RH 2 Strap Corner (4 degrees) 469-4317 70 299 360 22.5 169 9 81.8
LH 2 Strap Corner (4 degrees) 469-4318 70 299 360 22.5 169 9 81.8
RH 2 Strap Corner (5 degrees) 469-4319 70 292 353 22.5 168 9 81.8
LH 2 Strap Corner (5 degrees) 469-4320 70 292 353 22.5 168 9 81.8
K130 Tips
Dimensions (mm) Weight Retainer /
Type Part Number Notes
A B C (lbs) Slag Retainer
220-9130 /
Penetration Plus 467-9813 386 150 130 48.5
232-2139
Specialty
Extra Duty Long Life The black areas in the pictures of the tips is where the ARM will be
472-7765 386 148 130 55.8 applied.
(ARM) 220-9130 /
Penetration Long Life 232-2139
472-7766 364 20 130 36.6
(ARM)
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 320-336 329-5958 N/A N/A N/A 132-0999/275-5982 2 Hex Sidebar Protector uses shear block 330-2174.
HEX Sidebar Protector 345-385 326-3407 N/A N/A N/A 132-0999/132-0998 2
GP Sidecutter, RH 7Y-0357
320-336 6I-6371 2J-3507 N/A N/A 6
GP Sidecutter, LH 7Y-0358
HD Sidecutter, RH 357-2696
320-336 6I-6371 2J-3507 3K-5234 N/A 8
HD Sidecutter, LH 357-2697
HD Sidecutter, RH 326-3405
345-385 1D-4637 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9822 55 15.0
336, 345 70mm 22.5°
459-9823 68 18.7
100
374D/F, 374D/F-ME, 390D/F
233-7150 /
Penetration Plus 467-9817 445 174 150 73.1
232-2159
Specialty
Extra Duty Long Life The black areas in the pictures of the tips is where the ARM will be
472-7768 444 178 150 90.4 applied.
(ARM) 233-7150 /
Penetration Long Life 232-2159
472-7769 421 28 150 60.8
(ARM)
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 374, 390 329-5955 N/A N/A N/A 132-0999/132-1008 2 Hex Sidebar Protector uses shear block 330-2174.
HD Sidecutter, RH 326-3405
374, 390 7X-0410 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9824 58 22.0
374, 390 80mm 22.5°
459-9825 70 26.4
101
374D/F-ME, 390D/F-ME
Specialty
Extra Duty Long Life The black areas in the pictures of the tips is where the ARM will be
233-7170 485 194 170 128.7 applied.
(ARM)
232-0170
Penetration Long Life
233-7171 459 28 170 84.0
(ARM)
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 374, 390 329-5955 N/A N/A N/A 132-0999/132-1008 2 Hex Sidebar Protector uses shear block 330-2174.
HD Sidecutter, RH 326-3405
374, 390 7X-0410 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9826 60 33.1
374, 390 90mm 35°
459-9827 70 38.6
102
336E/F, 324E-ME, 326F-ME, 329E/F-
ME, 352F, 349E/F, 336E/F-ME
Bucket Edge Thickness 60mm
CapSure J550 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 6I-6554 60 279 339 22.5 120 9 68.7
RH 2 Strap Corner (4 degrees) 6I-6555 60 279 339 22.5 120 9 66.9
LH 2 Strap Corner (4 degrees) 6I-6556 60 279 339 22.5 120 9 66.9
CapSure J550 Tips
Dimensions (mm) Weight
Type Part Number CapSure Pin Kit Notes
A B C (lbs)
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 320-336 329-5958 N/A N/A N/A 132-0999/275-5982 2 Hex Sidebar Protector uses shear block 330-2174.
HEX Sidebar Protector 345-385 326-3407 N/A N/A N/A 132-0999/132-0998 2
GP Sidecutter, RH 7Y-0357
320-336 6I-6371 2J-3507 N/A N/A 6
GP Sidecutter, LH 7Y-0358
HD Sidecutter, RH 357-2696
320-336 6I-6371 2J-3507 3K-5234 N/A 8
HD Sidecutter, LH 357-2697
HD Sidecutter, RH 326-3405
345-385 1D-4637 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9812 55 11.5
324, 336, 345 60mm 22.5°
459-9814 70 14.5
103
336E/F, 324E-ME, 326F-ME, 329E/F-
ME, 352F, 349E/F, 336E/F-ME
Bucket Edge Thickness 64mm
CapSure J550 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 3G-9494 64 371 331 22.5 118 15 74.0
RH 2 Strap Corner (4 degrees) 3G-9495 64 371 331 22.5 118 15 71.9
LH 2 Strap Corner (4 degrees) 3G-9496 64 371 331 22.5 118 15 71.9
CapSure J550 Tips
Dimensions (mm) Weight
Type Part Number CapSure Pin Kit Notes
A B C (lbs)
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 320-336 329-5958 N/A N/A N/A 132-0999/275-5982 2 Hex Sidebar Protector uses shear block 330-2174.
HEX Sidebar Protector 345-385 326-3407 N/A N/A N/A 132-0999/132-0998 2
GP Sidecutter, RH 7Y-0357
320-336 6I-6371 2J-3507 N/A N/A 6
GP Sidecutter, LH 7Y-0358
HD Sidecutter, RH 357-2696
320-336 6I-6371 2J-3507 3K-5234 N/A 8
HD Sidecutter, LH 357-2697
HD Sidecutter, RH 326-3405
345-385 1D-4637 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9812 55 11.5
324, 336, 345 60mm 22.5°
459-9814 70 14.5
104
352F, 349E/F, 336E/F-ME, 345D-ME,
349F-ME
Bucket Edge Thickness 70mm
CapSure J550 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 275-2759 70 269.7 329.7 22.5 140 9 77.7
RH 2 Strap Corner (4 degrees) 275-2760 70 269.7 329.7 22.5 140 9 77.7
LH 2 Strap Corner (4 degrees) 275-2760 70 269.7 329.7 22.5 140 9 77.7
CapSure J550 Tips
Dimensions (mm) Weight
Type Part Number CapSure Pin Kit Notes
A B C (lbs)
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 320-336 329-5958 N/A N/A N/A 132-0999/275-5982 2 Hex Sidebar Protector uses shear block 330-2174.
HEX Sidebar Protector 345-385 326-3407 N/A N/A N/A 132-0999/132-0998 2
GP Sidecutter, RH 7Y-0357
320-336 6I-6371 2J-3507 N/A N/A 6
GP Sidecutter, LH 7Y-0358
HD Sidecutter, RH 357-2696
320-336 6I-6371 2J-3507 3K-5234 N/A 8
HD Sidecutter, LH 357-2697
HD Sidecutter, RH 326-3405
345-385 1D-4637 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9822 55 15.0
336, 345 70mm 22.5°
459-9823 68 18.7
105
352F, 349E/F, 336E/F-ME, 345D-ME,
349F-ME
Bucket Edge Thickness 70mm
CapSure J600 Adapters
Edge A B C D E Weight
Type Part Number Notes
Thickness (mm) (mm) (deg) (mm) (deg) (lbs)
Center 2-Strap 6I-6604 70 310 365 22.5 144 8 105.4
RH 2 Strap Corner (4 degrees) 6I-6605 70 310 365 22.5 144 8 102.8
LH 2 Strap Corner (4 degrees) 6I-6606 70 310 365 22.5 144 8 102.8
CapSure J600 Tips
Dimensions (mm) Weight
Type Part Number CapSure Pin Kit Notes
A B C (lbs)
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 320-336 329-5958 N/A N/A N/A 132-0999/275-5982 2 Hex Sidebar Protector uses shear block 330-2174.
HEX Sidebar Protector 345-385 326-3407 N/A N/A N/A 132-0999/132-0998 2
GP Sidecutter, RH 7Y-0357
320-336 6I-6371 2J-3507 N/A N/A 6
GP Sidecutter, LH 7Y-0358
HD Sidecutter, RH 357-2696
320-336 6I-6371 2J-3507 3K-5234 N/A 8
HD Sidecutter, LH 357-2697
HD Sidecutter, RH 326-3405
345-385 1D-4637 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9822 55 15.0
336, 345 70mm 22.5°
459-9823 68 18.7
106
374D/F, 374D/F-ME, 390D/F
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 374, 390 329-5955 N/A N/A N/A 132-0999/132-1008 2 Hex Sidebar Protector uses shear block 330-2174.
HD Sidecutter, RH 326-3405
374, 390 7X-0410 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9824 58 22.0
374, 390 80mm 22.5°
459-9825 70 26.4
107
374D/F, 374D/F-ME, 390D/F
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 374, 390 329-5955 N/A N/A N/A 132-0999/132-1008 2 Hex Sidebar Protector uses shear block 330-2174.
HD Sidecutter, RH 326-3405
374, 390 7X-0410 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9824 58 22.0
374, 390 80mm 22.5°
459-9825 70 26.4
108
374D/F-ME, 390D/F-ME
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 374, 390 329-5955 N/A N/A N/A 132-0999/132-1008 2 Hex Sidebar Protector uses shear block 330-2174.
HD Sidecutter, RH 326-3405
374, 390 7X-0410 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
459-9826 60 33.1
374, 390 90mm 35°
459-9827 70 38.6
109
390D/F-ME
Wear Protection
Type Machine Part Number Bolts Nuts Washer Retainer / Pin Qty. Notes
HEX Sidebar Protector 374, 390 329-5955 N/A N/A N/A 132-0999/132-1008 2 Hex Sidebar Protector uses shear block 330-2174.
HD Sidecutter, RH 326-3405
374, 390 7X-0410 2J-3507 3K-5234 N/A 10
HD Sidecutter, LH 326-3406
Modular Edge Shrouds
Model Base Edge Bevel Angle Part Number Width (mm) Weight (lbs) Notes
449-0904 70 37.5
390 100mm 35°
449-0905 85 46.3
110
111
WHEEL TRACTOR
SCRAPERS
112
Cat® WTS GET Options
Caterpillar Offers a Complete Line of Scraper Center and End Cutting Edges
Standard center and end-cutting edges
• For use on all scraper models (open bowl, auger and elevating scraper)
• Used in low-to-medium abrasion and low-to-high impact conditions
• Available in various thicknesses and sizes for both stinger and level-cut arrangements
• Can be reversed or propellered for prolonged edge use and improved cost per hour
Bolt-on adapters
• For use on Elevating Scraper 613, 615, 623 and 633
• Used in low-to-high abrasion conditions and low-to-medium impact conditions when improved penetration
is needed
• Bolt-on adapters accept pin-on tips
Sidebowl Protectors
Sidebowl protectors are available in two styles: Bolt on sidebowl protectors and pin on sidebowl protectors.
Bolt on style takes a weld on adapter plate that accepts the bolt on sidebowl protector. This available for
620, 630 and 650 series scrapers.
Pin on style takes a weld on adapter plate that accepts the pin on sidebowl protector. This is available for
620, 630 and 650 series scrapers.
Cat® Elevated Scraper GET Options
Caterpillar Warranty
Cat router bits and cutting edges are guaranteed against breakage. If a component breaks during normal operation, it will be
replaced free. The warranty is subject to certain terms and conditions. See your Cat dealer for details.
Caterpillar offers parts for 613, 615, 623 and 633 Elevating Scraper
• Flight assemblies
• Chain assemblies
• Sprockets
• Idlers and idler groups
• Rollers and roller groups
Two Parts Kits are available for your 613, 615, and 623 Elevating
Scraper:
Short Tooth
• Impact Resistant
Long Tooth
• Long Teeth are symmetrical and can be reversed for balanced wear.
Penetration Tooth
• Penetration Teeth are ideal for densely compacted materials.
• Approximately 50% less cross sectional area than Long Tooth.
Wide Tooth
• Wide Teeth are used to maintain smooth trench floors and in low
abrasion, easy to penetrate materials.
Sharp Tooth
• Sharp Teeth are used to achieve maximum penetration typically used in
cohesive material.
• Stay sharp during the life of the tooth.
Cutting Edges
Center End Router Bits
Notes
Hardware
Hardware
Hardware
Type
Quantity
Cutting Cutting Router
Quantity
Quantity
Thickness Thickness
Edges Edges Bits
Hardware
Quantity
Quantity
Adapter Shear
Type Description Protector Notes
Plate Block
Hardware
Type Description Hardware Quantity Part Nuts Washers Notes
Cutting Edge Bolt 3/4-10 x 2-1/4 15 4F-7827 2J-3506 5P-8248 Bolt-On Tooth Adapters will
Router Bit Bolt 5/8-11 x 2-1/4 6 8S-9092 4K-0367 5P-8247 require 6 4F-7827 bolts for the
Sprocket Bolt 5/8-11 x 2-3/4 16 1A-8537 4K-0367 5P-8247 cutting edges and router bits and 8
Hardware Flight Assembly Bolt 1/2-20 x 1-1/2 120 0S-1603 6B-6684 5P-8245 5F-8922 bolts for the tooth
Bolt-On 1-8 x 3-3/4 8 1J-4948 2J-3507 5P-8250 adapters.
Wear Protection Pin 8 9J-8441
Pin-On n/a
Retainer 8 8E-5559
Repair Parts
Type Description Position Thickness Part Number Notes
25.4 4T-7668
Left
35.1 7J-4228
Full Replacement
25.4 4T-7667
Right
35.1 7J-4227
Bowl Repair
Left 30 229-7147
Partial Replacement
Right 30 229-7148
Left 35.1 208-5185
Bolt Hole Area Replacement
Right 35.1 208-5186
115
620G
Machine 621G, 627G
Models
Cutting Edges
Center End Router Bits
Notes
Hardware
Hardware
Hardware
Type
Quantity
Cutting Cutting Router
Quantity
Quantity
Thickness Thickness
Edges Edges Bits
Hardware
Quantity
Quantity
Adapter Shear
Type Description Protector Notes
Plate Block
Hardware
Type Description Hardware Quantity Part Nuts Washers Notes
Cutting Edge Bolt 1-8 x 3 19 4F-4042
Router Bit Bolt 1-8 x 3 10 4F-4042 2J-3507 5P-8250
Hardware Bolt-On 1-8 x 3-3/4 8 1J-4948
Wear Protection Pin 8 9J-8441
Pin-On n/a
Retainer 8 8E-5559
Repair Parts
Type Description Position Thickness Part Number Notes
25.4 4T-7668
Left
35.1 7J-4228
Full Replacement
25.4 4T-7667
Right
35.1 7J-4227
Bowl Repair
Left 30 229-7147
Partial Replacement
Right 30 229-7148
Left 35.1 208-5185
Bolt Hole Area Replacement
Right 35.1 208-5186
116
620H & 620K
Machine 621H, 627H, 621K, 627K
Models
Cutting Edges
Center End Router Bits
Type Notes
Hardware
Hardware
Hardware
Quantity
Cutting Cutting Router
Quantity
Quantity
Thickness Thickness
Edges Edges Bits
Hardware
Quantity
Quantity
Adapter Shear
Type Description Protector Notes
Plate Block
Hardware
Type Description Hardware Quantity Part Nuts Washers Notes
Cutting Edge Bolt 1-8 x 3 20 4F-4042
Router Bit Bolt 1-8 x 3 10 4F-4042 2J-3507 5P-8250
Hardware Bolt-On 1-8 x 3-3/4 8 1J-4948
Wear Protection Pin 8 9J-8441
Pin-On n/a
Retainer 8 8E-5559
Repair Parts
Type Description Position Thickness Part Number Notes
25.4 4T-7668
Left
35.1 7J-4228
Full Replacement
25.4 4T-7667
Right
35.1 7J-4227
Bowl Repair
Left 30 229-7147
Partial Replacement
Right 30 229-7148
Left 35.1 208-5185
Bolt Hole Area Replacement
Right 35.1 208-5186
117
623
Machine 623G, 623H, 623k
Models
Cutting Edges
Center End Router Bits
Notes
Hardware
Hardware
Hardware
Type
Quantity
Cutting Cutting Router
Quantity
Quantity
Thickness Thickness
Edges Edges Bits
Quantity
Adapter Shear
Type Description Protector Notes
Plate Block
Hardware
Type Description Hardware Quantity Part Nuts Washers Notes
Cutting Edge Bolt 1-8 x 3 20 4F-4042 Bolt-On Tooth Adapters will
2J-3507 5P-8250
Router Bit Bolt 1-8 x 3 10 4F-4042 require 16 4F-4042 bolts for the
Sprocket Bolt 3/4-10 x 4-1/4 16 0S-1756 2J-3506 5P-8248 cutting edges and router bits and
Hardware Flight Assembly Bolt 5/8-18 x 2 120 0S-1576 6B-6683 5P-8247 8 1J-3527 bolts for the tooth
Bolt-On 1-8 x 3-3/4 8 1J-4948 2J-3507 5P-8250 adapters.
Wear Protection Pin 8 9J-8441
Pin-On n/a
Retainer 8 8E-5559
Repair Parts
Type Description Position Thickness Part Number Notes
25.4 4T-7668
Left
35.1 7J-4228
Full Replacement
25.4 4T-7667
Right
35.1 7J-4227
Bowl Repair
Left 30 229-7147
Partial Replacement
Right 30 229-7148
Left 35.1 208-5185
Bolt Hole Area Replacement
Right 35.1 208-5186
118
630G & 630K
Machine 631G, 637G, 631K, 637K
Models
Cutting Edges
Center End Router Bits
Type Notes
Hardware
Hardware
Hardware
Quantity
Cutting Cutting Router
Quantity
Quantity
Thickness Thickness
Edges Edges Bits
Quantity
Adapter Shear
Type Description Protector Notes
Plate Block
Hardware
Type Description Hardware Quantity Part Nuts Washers Notes
Cutting Edge Bolt 1-8 x 3-1/4 22 4J-9058
Router Bit Bolt 1-8 x 3-1/4 10 4J9058 2J-3507 5P-8250
Hardware Bolt-On 1-8 x 3-3/4 8 1J-4948
Wear Protection Pin 8 9J-8441
Pin-On n/a
Retainer 8 8E-5559
Repair Parts
Type Description Position Thickness Part Number Notes
25.4 4T-7668
Left
35.1 7J-4228
Full Replacement
25.4 4T-7667
Right
35.1 7J-4227
Bowl Repair
Left 30 229-7147
Partial Replacement
Right 30 229-7148
Left 35.1 208-5185
Bolt Hole Area Replacement
Right 35.1 208-5186
1
Only the center cutting edge is serrated
2
The center and end cutting edges are serrated
119
650
Machine 657G
Models
Cutting Edges
Center End Router Bits
Notes
Hardware
Hardware
Hardware
Type
Quantity
Cutting Cutting Router
Quantity
Quantity
Thickness Thickness
Edges Edges Bits
Hardware
Quantity
Quantity
Adapter Shear
Type Description Protector Notes
Plate Block
Hardware
Type Description Hardware Quantity Part Nuts Washers Notes
Cutting Edge Bolt 1-8 x 3-1/4 48 4J-9058
Router Bit Bolt 1-8 x 3-1/4 10 4J-9058 2J-3507 5P-8250
Hardware Bolt-On 1-8 x 3-3/4 8 1J-4948
Wear Protection Pin 8 9J-8441
Pin-On n/a
Retainer 8 8E-5559
Repair Parts
Type Description Position Thickness Part Number Notes
25.4 4T-7668
Left
35.1 7J-4228
Full Replacement
25.4 4T-7667
Right
35.1 7J-4227
Bowl Repair
Left 30 229-7147
Partial Replacement
Right 30 229-7148
Left 35.1 208-5185
Bolt Hole Area Replacement
Right 35.1 208-5186
120
121
UNDERGROUND LOAD HAUL
DUMP LOADERS
122
Cat Bolt On G.E.T.
®
123
Cat Bolt On G.E.T.
®
Increase Productivity
Get more time in the dirt with an increase in available wear material over standard weld on GET.
More available wear material allows for longer use before changing out segments saving you time and
money. The Bolt On design allows fast and easy maintenance and minimizes the downtime required to
remove weld on segments.
Cat® Weld On
Durability
Thorough stress testing and evaluation into application heat loading ensures this GET is capable for
any underground application. Whether it be a demanding production environment or chasing meters in
development, the Half Arrow Bolt On GET is a great choice due to its durable retention system and cost
effective means of protection for your investment.
124
Cat Bolt On G.E.T.
®
Cat Bolt On Half Arrow Features CAT BOLT ON HALF ARROW G.E.T. SPECIFICATIONS
• Minimized Throw-way Material Attachment Method: Bolt On
• No Welding or Cutting Application: Underground Development or Production
• Integral Lifting Eyes
Side Protection: Corner Guards - Bolt On
• Built-in Wear Indicators
• Easier Replacement Than Weld-on Serviceability: Fast, Simple Change Out Design
• Ultimate Pile Penetration Safety: No Welding or Cutting, Integrated Lifting Eyes
• Corner Guard
Cat Steel Class: DH3 For Increased Hardness and Abrasion Resistance
• Half Life Corner Segments
Product Life: Visual Wear Indicators - Half Life Replacement Corners
Cat Weld On
Cat Bolt On
Half Arrow
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at mining.cat.com and cat.com.
AEHJ0186
© 2017 Caterpillar Inc. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade
dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
125
R1300G
Buckets 243-5577 Bucket 2.4M3 (3.1 YD3) Machine SN's T829 TT092
R1300G
Buckets 186-9278 Bucket 2.8M3 (3.7 YD3) Machine SN's T829 TT092
R1300G
Buckets 243-6224 Bucket 3.4M3 (4.5 YD3) Machine SN's T829 TT092
Bolts 1-1/4 - 7 x 3.25 8T-9079 24 6V-6535 is used for attaching the corner guards to the cast corners.
Bolts 1-1/4 - 7 x 3.75 6V-6535 4
Bolt On Half Arrows Nuts 1-1/4 - 7 3K-9770 28
Washers 1-1/4 4K-0684 28
Plug Kit 36 Plugs 522-6202 1 Plugs are used to insert in counterbores to keep debris out during operation.
Mechanically Attached
Retention Kit 317-7948 9
System
Bolts 1-1/4 - 7 x 3.25 8T-9079 24 6V-6535 is used for attaching the corner guards to the cast corners.
Bolts 1-1/4 - 7 x 3.75 6V-6535 4
Bolt On Half Arrows Nuts 1-1/4 - 7 3K-9770 28
Washers 1-1/4 4K-0684 28
Plug Kit 36 Plugs 522-6202 1 Plugs are used to insert in counterbores to keep debris out during operation.
Mechanically Attached
Retention Kit 317-7948 9
System
226-5404 Bucket 6.7M3 (8.8 YD3)
R1700G T858, TT245,
Buckets Machine SN's
256-0387 Bucket High Pen 6.7M3 (8.8 YD3) T796
2932mm Bucket Width
GET Required
Type Half Life Corners Base Edge Cast Corners Notes
PN Description Quantity Hardware
249-4885
Weld On 6Y-2107 Half Arrow 1 N/A N/A 256-0381
249-4884
416-0254 Half Arrow 1
416-0255 Half Arrow 2 249-4885
Cat Weld On N/A N/A 256-0381
416-0252 Corner Edge RH 1 249-4884
416-0253 Corner Edge LH 1
253-0064 Corner Guard RH 1 2 Half Life Corners should be
253-0065 Corner Guard LH 1 2 installed at first wear indicator
470-9306 Corner Shroud RH 1 4 line.
470-9312 470-9314
Bolt On Half Arrows 470-9307 Corner Shroud LH 1 4 470-9326
470-9313 470-9315
470-9308 Transition Shroud 2 2
470-9310 Straight Shroud Medium 3 2
470-9311 Straight Shroud Large 2 3
317-7941 Corner Shroud RH 1 1
317-7942 Corner Shroud LH 1 1
Mechanically Attached 317-7955 317-7939
317-7944 Straight Shroud Medium 3 1 370-2312
System 317-7956 317-7940
317-7945 Straight Shroud Large 2 1
317-7946 Transition Shroud 2 1
Hardware
Bolts 1-1/4 - 7 x 3.25 8T-9079 24 6V-6535 is used for attaching the corner guards to the cast corners.
Bolts 1-1/4 - 7 x 3.75 6V-6535 4
Bolt On Half Arrows Nuts 1-1/4 - 7 3K-9770 28
Washers 1-1/4 4K-0684 28
Plug Kit 36 Plugs 522-6202 1 Plugs are used to insert in counterbores to keep debris out during operation.
Mechanically Attached
Retention Kit 317-7948 9
System
Bolts 1-1/4 - 7 x 3.25 8T-9079 25 6V-6535 is used for attaching the corner guards to the cast corners.
Bolts 1-1/4 - 7 x 3.75 6V-6535 4
Bolt On Half Arrows Nuts 1-1/4 - 7 3K-9770 29
Washers 1-1/4 4K-0684 29
Plug Kit 36 Plugs 522-6202 1 Plugs are used to insert in counterbores to keep debris out during operation.
Mechanically Attached
Retention Kit 317-7948 9
System
R1700G T858, TT245,
Buckets 256-0386 Bucket Light Mat 8.8M3 (11.5 YD3) Machine SN's
T796
3492mm Bucket Width
GET Required
Type Half Life Corners Base Edge Cast Corners Notes
PN Description Quantity Hardware
249-4885
Weld On 6Y-2107 Half Arrow 2 N/A N/A 256-0385
249-4884
416-0254 Half Arrow 2
416-0255 Half Arrow 2 249-4885
Cat Weld On N/A N/A 256-0385
416-0252 Corner Edge RH 1 249-4884
416-0253 Corner Edge LH 1
253-0064 Corner Guard RH 1 2 Half Life Corners should be
253-0065 Corner Guard LH 1 2 installed at first wear indicator
470-9306 Corner Shroud RH 1 4 line.
470-9312 470-9314
Bolt On Half Arrows 470-9307 Corner Shroud LH 1 4 470-9328
470-9313 470-9315
470-9308 Transition Shroud 2 2
470-9310 Straight Shroud Medium 6 2
470-9311 Straight Shroud Large 1 3
317-7941 Corner Shroud RH 1 1
317-7942 Corner Shroud LH 1 1
Mechanically Attached 317-7955 317-7939
317-7944 Straight Shroud Medium 6 1 370-2322
System 317-7956 317-7940
317-7945 Straight Shroud Large 1 1
317-7946 Transition Shroud 2 1
Hardware
Bolts 1-1/4 - 7 x 3.25 8T-9079 27 6V-6535 is used for attaching the corner guards to the cast corners.
Bolts 1-1/4 - 7 x 3.75 6V-6535 4
Bolt On Half Arrows Nuts 1-1/4 - 7 3K-9770 31
Washers 1-1/4 4K-0684 31
Plug Kit 36 Plugs 522-6202 1 Plugs are used to insert in counterbores to keep debris out during operation.
Mechanically Attached
Retention Kit 317-7948 11
System
R1700K
Buckets 495-1639 Ejector Bucket 5.8 M3 Machine SN's TT554
Bolts 1-1/4 - 7 x 3.25 8T-9079 24 6V-6535 is used for attaching the corner guards to the cast corners.
Bolts 1-1/4 - 7 x 3.75 6V-6535 4
Bolt On Half Arrows Nuts 1-1/4 - 7 3K-9770 28
Washers 1-1/4 4K-0684 28
Plug Kit 36 Plugs 522-6203 1 Plugs are used to insert in counterbores to keep debris out during operation.
Mechanically Attached
Retention Kit 317-7948 9
System
1
Ejector ramp kit required on ejector buckets
R1700K
Buckets 4671829 Bucket 6.8 M3 Machine SN's TT554
Bolts 1-1/4 - 7 x 3.25 8T-9079 24 6V-6535 is used for attaching the corner guards to the cast corners.
Bolts 1-1/4 - 7 x 3.75 6V-6535 4
Bolt On Half Arrows Nuts 1-1/4 - 7 3K-9770 28
Washers 1-1/4 4K-0684 28
Plug Kit 36 Plugs 522-6203 1 Plugs are used to insert in counterbores to keep debris out during operation.
Mechanically Attached
Retention Kit 317-7948 9
System
R1700K
Buckets 4671828 Bucket 6.3 M3 Machine SN's TT554
Bolts 1-1/4 - 7 x 3.25 8T-9079 25 6V-6535 is used for attaching the corner guards to the cast corners.
Bolts 1-1/4 - 7 x 3.75 6V-6535 4
Bolt On Half Arrows Nuts 1-1/4 - 7 3K-9770 29
Washers 1-1/4 4K-0684 29
Plug Kit 36 Plugs 522-6203 1 Plugs are used to insert in counterbores to keep debris out during operation.
Mechanically Attached
Retention Kit 317-7948 9
System
249-4899 Bucket 7.2M3 (9.4 YD3)
R2900G T859 TT707
Buckets 249-4915 Bucket High Pen 7.2M3 (9.4 YD3) Machine SN's T994 TT208
303-8806 Bucket 6.4M3 (8.4 YD3) TT093
3054mm Bucket Width
GET Required
Type Half Life Corners Base Edge Cast Corners Notes
PN Description Quantity Hardware
249-4885
Weld On 6Y-2107 Half Arrow 2 N/A N/A 249-4894
249-4884
416-0254 Half Arrow 1
416-0255 Half Arrow 2 249-4885
Cat Weld On N/A N/A 249-4894
416-0252 Corner Edge RH 1 249-4884
416-0253 Corner Edge LH 1
317-7941 Corner Shroud RH 1 1
317-7942 Corner Shroud LH 1 1
Mechanically Attached 317-7955 317-7939
317-7944 Straight Shroud Medium 2 1 370-2327
System 317-7956 317-7940
317-7945 Straight Shroud Large 3 1
317-7946 Transition Shroud 2 1
Hardware
Mechanically Attached
Retention Kit 317-7948 9
System
R2900G/R3000H
249-4892 Bucket 8.2M3 (10.7 YD3) T859 TT707
Buckets 249-4916 Bucket High Pen 8.2M3 (10.7 YD3) Machine SN's T994 TT208
370-2599 Bucket 8.3m3 (10.9 yd3) TT093 TT589
3154mm Bucket Width
GET Required
Type Half Life Corners Base Edge Cast Corners Notes
PN Description Quantity Hardware
249-4885
Weld On 6Y-2107 Half Arrow 2 N/A N/A 249-4894
249-4884
416-0254 Half Arrow 1
416-0255 Half Arrow 2 249-4885
Cat Weld On N/A N/A 249-4894
416-0252 Corner Edge RH 1 249-4884
416-0253 Corner Edge LH 1
317-7941 Corner Shroud RH 1 1
Mechanically Attached 317-7942 Corner Shroud LH 1 1 317-7955 317-7939
370-2327
System 317-7945 Straight Shroud Large 5 1 317-7956 317-7940
317-7946 Transition Shroud 2 1
Hardware
Mechanically Attached
Retention Kit 317-7948 9
System
249-4893
R2900G/R3000H
Bucket 8.9M3 (11.6 YD3)
T859 TT707
249-4914 Bucket High Pen 8.9M3 (11.6 YD3)
Buckets Machine SN's T994 TT208
310-0963 Ejector Bucket 7.1M3 (9.3 YD3)
TT093 TT589
356-1320 Bucket 10.5m3 (13.7 yd3)
3354mm Bucket Width
GET Required
Type Half Life Corners Base Edge Cast Corners Notes
PN Description Quantity Hardware
249-4885
Weld On 6Y-2107 Half Arrow 2 N/A N/A 249-4880
249-4884
416-0254 Half Arrow 1
416-0255 Half Arrow 2 249-4885
Cat Weld On N/A N/A 249-4880
416-0252 Corner Edge RH 1 249-4884
416-0253 Corner Edge LH 1
317-7941 Corner Shroud RH 1 1
317-7942 Corner Shroud LH 1 1
Mechanically Attached 317-7955 317-7939
317-7943 Straight Shroud Small 2 1 370-2337
System 317-7956 317-7940
317-7945 Straight Shroud Large 4 1
317-7946 Transition Shroud 2 1
Hardware
Mechanically Attached
Retention Kit 317-7948 10
System
R2900G/R3000H
249-4892 Bucket 8.2M3 (10.7 YD3) T859 TT707
Buckets 249-4916 Bucket High Pen 8.2M3 (10.7 YD3) Machine SN's T994 TT208
370-2599 Bucket 8.3m3 (10.9 yd3) TT093 TT589
3454mm Bucket Width
GET Required
Type Half Life Corners Base Edge Cast Corners Notes
PN Description Quantity Hardware
249-4885
Weld On 6Y-2107 Half Arrow 2 N/A N/A 249-4894
249-4884
416-0254 Half Arrow 1
416-0255 Half Arrow 2 249-4885
Cat Weld On N/A N/A 249-4894
416-0252 Corner Edge RH 1 249-4884
416-0253 Corner Edge LH 1
317-7941 Corner Shroud RH 1 1
317-7942 Corner Shroud LH 1 1
Mechanically Attached 317-7955 317-7939
317-7944 Straight Shroud Medium 2 1 370-2327
System 317-7956 317-7940
317-7945 Straight Shroud Large 4 1
317-7946 Transition Shroud 2 1
Hardware
Mechanically Attached
Retention Kit 317-7948 10
System
138
D Series Buckets
Machine 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 2727D2, 272D2 XHP,
Models 239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2, 299D2 XHP, 257D,
277D, 287D, 297D, 297D XHP, 297D2, 297D2 XHP
Moldboard Cutting Edges
Thickness
Profile Length Width Qty Hardware Notes
16mm 19mm
6.5" 1 6 135-9393
54"
8" 1 6 174-7965 174-7971
6.5" 1 8 135-9394
60"
8" 1 8 174-7966 174-7972
6.5" 1 8 135-9395
66"
8" 1 8 174-7967 174-7973
Flat 6.5" 1 11 135-9396
72"
8" 1 11 174-7968 174-7974
6.5" 1 11 135-9397
78"
8" 1 11 174-7969 174-7975
6.5" 1 11 195-5124
84"
8" 1 7 174-7970 174-7976
96" 6.5" 1 13 296-7602
60" 8" 1 8 319-9599
66" 8" 1 8 319-9600
Serrated 72" 8" 1 11 319-9601
78" 8" 1 11 319-9602
84" 8" 1 7 319-9603
Specialty
60" 7 136-8734 1 2
66" 8 136-8735 1 2
Bolt-On Tooth Bar for Base
72" 8 136-8736 1 2
Edge Buckets
78" 8 217-4878 1 2
84" 8 275-5427 1 2
60" 7 159-0330 1 2
66" 8 159-0340 1 2
Bolt-On Tooth Bar for Bolt-
72" 8 159-0350 1 2
On Buckets
78" 8 195-9160 1 2
84" 8 264-2084 1 2
Hardware and Wear Protection
Type Application Hardware Quantity Bolts Nuts Washers Notes
D Series Models
Machine 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 2727D2, 272D2 XHP,
Models 239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2, 299D2 XHP, 257D,
277D, 287D, 297D, 297D XHP, 297D2, 297D2 XHP
Broom Edges and Accessories
Part Type Part Number Length Qty Hardware Notes
Buckets BU115 and BP115B
Cutting Edge 489-6702 64" 1 6
Poly Bristle Assembly 165-9069 N/A 17 N/A
Wire Bristle Assembly 165-9070 N/A 18 N/A
Buckets BU118 and BP18B
Cutting Edge 489-6703 76" 1 7
Poly Bristle Assembly 165-9071 N/A 21 N/A
Wire Bristle Assembly 165-9072 N/A 20 N/A
Bucket BP115C
Cutting Edge 452-4148 60.5" 1 6 Use lock washers to install cutting edges.
Poly Bristle Assembly 165-9069 N/A 17 N/A
Wire Bristle Assembly 165-9070 N/A 18 N/A
Bucket BP118C
Cutting Edge 452-4147 72.5" 1 7 Use lock washers to install cutting edges.
Poly Bristle Assembly 165-9071 N/A 21 N/A
Wire Bristle Assembly 165-9072 N/A 20 N/A
Buckets BA18 and BA118C
Poly Bristle Assembly 166-0322 N/A 22 N/A
Wire Bristle Assembly 166-0323 N/A 21 N/A
All series Gutter Buckets
Poly Bristle Assembly 172-4563 N/A 1 N/A
Wire Bristle Assembly 460-9777 N/A 1 N/A
Hardware and Wear Protection
Type Application Hardware Quantity Bolts Nuts Washers Notes
Hardware Cutting Edges Bolts 1/2 - 13 x 2 Above 4F-3649 6V-8188 3B-4508 Only use washers when called out above.
139
AUGER BITS & ACCESSORIES
Part Class Type / Size Part #
6" 153-4083
9" 153-4084
12" 153-4085
Standard Duty 15" 366-7752
Bits 18" 153-4086
24" 153-4089
30" 217-3194
36" 153-4091
6" 372-0260
9" 372-0261
Industrial Duty 12" 372-0262
Bits 16" 372-0263
18" 372-0264
24" 372-0265
Gage Tooth (Outer) 371-3694
Flat Tooth (Inner) 371-3690
HF Gage Tooth (Outer) 371-3695
Flat Carbide Tooth (Inner) 371-3691
Chisel Tooth (Inner) 371-3696
Flat Hard Face Tooth HF (Inner) 371-3692
Teeth
Chisel Carbide Tooth (Inner) 371-3697
Flat HF Tooth (HF Both Sides, Inner) 371-3693
Chisel HF Tooth (Inner) 371-3698
Standard Duty Tooth 153-4094
Hard Face Tooth 174-9566
Carbide Inserted Tooth 174-9567
24" 153-4092
Tree Bit
36" 153-4095
6" Bolt-On 372-0230
9" Bolt-On 372-0231
Drill Head, 12" Standard 372-0232
Rock Heads
15" Bolt-On 372-0233
Drill Head, 18" Standard 372-0234
Drill Head, 24" Standard 372-0235
Hex to Round 156-6329
Adapters
Round to Hex 217-3191
12" 156-6328
Extensions
24" 217-3192
Telescoping 3' 372-0256
Extensions 6' 372-0257
Retention Pin Kit 372-0258
Accessories
Pilot Point 153-4093
140
PEBJ0079-01
©
2017 Caterpillar
All Rights Reserved | Printed in USA
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power
Edge” trade dress as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.