Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
271 views

Manual FieldView Software

FieldView is PC software that allows users to view resistivity data in real time from Syscal Pro and Elrec Pro Switch units. It displays the apparent resistivity pseudosection and stores the data for analysis in IRIS Instruments' Prosys II software. FieldView provides quality control of measurements in the field and the ability to make adjustments if needed. It requires a Windows PC with at least 1 GHz processor, 1 GB RAM, and 1024x600 screen resolution and connects via USB cable.

Uploaded by

Sergio Jr S Fachin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
271 views

Manual FieldView Software

FieldView is PC software that allows users to view resistivity data in real time from Syscal Pro and Elrec Pro Switch units. It displays the apparent resistivity pseudosection and stores the data for analysis in IRIS Instruments' Prosys II software. FieldView provides quality control of measurements in the field and the ability to make adjustments if needed. It requires a Windows PC with at least 1 GHz processor, 1 GB RAM, and 1024x600 screen resolution and connects via USB cable.

Uploaded by

Sergio Jr S Fachin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

IRIS INSTRUMENTS

FieldView Software
Graphic PC Software for Elrec Pro / Syscal Pro Switch units

FieldView is a PC software allowing to retrieve data in real time from a resistivity-meter Syscal Pro /
Elrec Pro Switch type.
This allows a real time display of the apparent resistivity pseudo-section and also a possibility in the same
time to store the data set in the PC in a file readable by the IRIS Instruments Prosys II software
So, FieldView allows to have a direct data quality control, in the field, and then, to react quickly in case of
the measurements don’t match the user’s requirements.
The minimum PC configuration is the following one:
- Pentium microprocessor (1 GHz)
- Windows Xp
- RAM memory: 1 Gb
- Screen resolution: 1024 * 600

The communication is done by a USB link cable.

REAL TIME DISPLAY OF THE


APPARENT RESISTIVITY PSEUDO SECTION
DURING THE ACQUISITION PROCESS

IRIS INSTRUMENTS - 1, avenue Buffon, B.P. 6007 - 45060 Orléans Cedex 2, France
Phone: +33 (0)2 38 63 81 00 - Fax: +33 (0)2 38 63 81 82
E-mail: info@iris-instruments.com - Web site: www.iris-instruments.com
FieldView Software
During the realization of the sequence, data can be also displayed, in real time, in the following ways:

Acquisition progress (sequence report points)

Numeric values of the whole parameters measured

Apparent resistivity values in a bilog scatter chart

IRIS INSTRUMENTS - 1, avenue Buffon, B.P. 6007 - 45060 Orléans Cedex 2, France
Phone: +33 (0)2 38 63 81 00 - Fax: +33 (0)2 38 63 81 82
E-mail: info@iris-instruments.com - Web site: www.iris-instruments.com

You might also like