Theory of Metal Cutting KTU Syllabus

Course
Course Name L-T-P-Credits Year of Introduction

code
MP305 THEORY OF METAL CUTTING 3-0-0-3 2016
Prerequisite: MP212 Machine tools
Course Objectives
 To familiarize tool geometry and cutting forces

 To impart the fundamental principles of the tribology of metal cutting and machinability
of work materials
 To impart knowledge on tool materials, tool wear and tool life
Syllabus
Basic functional principles of machine tools, Tool geometry and tool angles in ASA and ORS,
Conversion of tool angles from one system to another, Mechanism of chip formation in
machining, Orthogonal cutting and oblique cutting, Causes of oblique cutting and chip flow
deviation, Cutting forces and their represent them in Merchant’s circle diagram, Estimation of
cutting forces, Relevance of cutting temperature, estimation and its control, Concept of
machinability and its improvement, Failure mechanism of cutting tools and assessment of tool
life, Cutting tool materials, properties and their application, ISO standards for cutting tools
Expected Outcome
The students will be able to
i. To identify the tool parameters and convert them from one system to another.
ii. To determine cutting forces and temperature during machining.
iii. To assess tool life for given cutting conditions.
iv. To select suitable tools for different applications and identify methods to improve
machinability.
References
1. Chattopadhyay A.B., Chattopadhyay A. K. and Paul S. Manufacturing Processes II,
NPTEL Online Lecture Series (accessed on Nov. 2015)
2. Childs T., Maekawa K., Obikawa T. and Yamane Y. Metal Machining Theory and
Applications, Arnold, London (2000)
3. Astakhov V.P., Metal Cutting Mechanics, CRC Press (1999).
4. Boothroyd G., Fundamentals of Metal Machining and Machine Tools, CRC Press (1988)
5. Stephenson D. A. and Agapiou J. S. Metal Cutting Theory and Practice, CRC Press
(2005)
6. M C Shaw, Metal Cutting Principles, Oxford and IBH Publications, New Delhi (1969)
Course Plan
Sem.
Module Contents Hours exam
marks
Basic functional principles of machine tool operations: Concept of
Generatrix and Directrix, Tool – work motions
Geometry of single point cutting tools: Machine reference system
I 6 15%
(ASA) and tool reference system (ORS). Conversion of tool angles
from ASA to ORS and vice versa: Graphical method
Mechanism of chip formation: Mechanism of chip formation in
ductile and brittle materials.
Geometry and characteristics of chip forms: cutting ratio, shear
angle and cutting strain
II 6 15%
Built up edge (BUE) formation and characteristics of BUE.
Types of chips and conditions of their formation.
Orthogonal and oblique cutting, Chip flow deviation and its
quantification, Effective rake, Effects of oblique cutting.
First Internal Exam
Machining forces and Merchants’ Circle diagram: Cutting force
components and their significance. Merchant’s circle diagram and
its advantageous use. Lee and Shaffer's Theory, Evaluation of
cutting power consumption.
III 8 20%
Analytical and experimental estimation of cutting forces:
Development of equations for cutting forces under orthogonal and
oblique turning. Direct and indirect methods of measurement of
cutting forces. Dynamometers for measurement of cutting forces.
Energy balance of the cutting system
Cutting temperature: Sources and causes of heat generation and
development of temperature in machining, Effects of the high
cutting temperature on tool and job. Determination of cutting
IV 7 15%
temperature, Role of variation of the various machining
parameters on cutting temperature. Control of cutting temperature.
Cutting fluids and their action, properties and heir selection of
cutting fluids.
Second Internal Exam
Machinability: Concept and definition, Role of different
machining Parameters on machinability of work materials.
Methods of improving machinability. Machinability rating.
V Failure of cutting tools, Mechanisms and pattern (geometry) of 8 20%
cutting tool wear, Chatter in machining, Types of chatters,
Mechanism of chatter, Factors effecting chatter in machining.
Assessment of tool life, Taylor’s tool life equation
Essential properties for cutting tool materials, Characteristics and
applications of common cutting tool materials (HSS, Carbides,
Ceramics and Diamond). Introduction to advanced cutting tool
VI 7 15%
materials and their application. Tool Coatings and their
characteristics.
ISO specifications for inserts and tool holders.
End Semester Exam
Question Paper Pattern
Maximum marks: 100 Time: 3 hours
The question paper shall consist of three parts
Part A
4 questions uniformly covering modules I and II. Each question carries 10 marks
Students will have to answer any three questions out of 4 (3X10 marks =30 marks)
Part B
4 questions uniformly covering modules III and IV. Each question carries 10 marks
Students will have to answer any three questions out of 4 (3X10 marks =30 marks)
Part C
6 questions uniformly covering modules V and VI. Each question carries 10 marks
Students will have to answer any four questions out of 6 (4X10 marks =40 marks)
Note: In all parts, each question can have a maximum of four sub questions, if needed.

Theory of Metal Cutting KTU Syllabus

Uploaded by

Copyright:

Available Formats

Theory of Metal Cutting KTU Syllabus

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Theory of Metal Cutting KTU Syllabus

Uploaded by

Copyright:

Available Formats

What are the main topics covered in the course?

What are the different types of chips formed during machining?

Course

Course Name L-T-P-Credits Year of Introduction

 To familiarize tool geometry and cutting forces

Maximum marks: 100 Time: 3 hours

The question paper shall consist of three parts

You might also like