Ed Quay Race Cars Catalog PDF

‘82 - ‘92
CAMARO &
FIREBIRD
PARTS CATALOG
948 Commerce Drive (Route 100 & State Street)

Pottstown, Pa 19464
Information/Tech Line: 610 323-9560 Order Line: 800 477-5786
Fax: 610 970-1126 www.edquay.com 1
Thank you for your interest in our products. We appreciate you taking the time to contact us.
Remember, There is no substitute for quality! We know you’ve heard that statement many
times before, but in our case you’ll find it’s true. It is as important to us as it is to you that
your car be competitive from the very start.
The ed Quay Frame Rail Kit is totally jig welded for absolute accuracy and ease of installa-
tion. This kit is perfect for Super/Stock, Super/Gas, Super/Street, Bracket Racing and the
Pro/Street Scene. All of the parts we manufacture can be installed by the do-it-yourself en-
thusiast and are designed to save time and money. In the following pages you’ll see that the
components we make for the ‘82/92 Camaro/Firebird will help you build a first rate car. We
manufacture or sell everything needed to build a car from the ground up.
The purpose of any “kit” car is to allow the do-it-yourself person to build a car without the
problems that go along with designing one from scratch. The most crucial area in building a
car is making sure that the frame is straight, level and square. This part is already done be-
fore our kit reaches your doorstep. Our kit allows little or no room for error. Follow the in-
structions it will come out perfect. Our instruction booklet includes numerous photographs
to make the installation of the frame rails as easy as possible. The only way it would be eas-
ier would be for us to do it for you. If you can use sheet metal tools, are able to read a ruler
and know a good welder, you can install this kit with ease.
Ed Quay employs his vast experience to make sure the parts fit correctly and that the in-
structions are complete. All the guesswork is gone. We’ll keep you on track to successfully
completing your car. We are professionals that understand what it is like to build a car at
home. We are so certain of this that we take back any product that isn’t to your complete
satisfaction, provided it is returned to us in “as manufactured condition” within 30 days of
invoice date, freight prepaid.
Thank you for inquiring about our products. We wish you the best of luck in the coming sea-
sons and we hope to hear from you soon.
Ed Quay

Pottstown, Pa 19464
Track Tested,
Need We Say More?
THERE’S NO SUBSTITUE FOR QUAY QUALITY !
TABLE OF CONTENTS
Chassis page 4 to 11
Sheet Metal page 12
Engine - Transmission page 13 & 14
Front Suspension page 15
Steering page 16 & 17
Fuel Cell - Battery Mounts &

Cover Kits page 18 & 19
Seat Mounts - Weight page 20
Brakes - page 21
Price List - page 22 to 24

Pottstown, Pa 19464
Track Tested,
Need We Say More?
Chassis
1982 - 92 CAMARO EXACT FIT FRAME
PN 100-2035
PN 100- 2015 Fully welded frame kit with a standard
Fully welded bare frame kit 4 link suspension installed
Now you can buy the same quality frame rail kit that goes into a World Champion SS/GT car built at our factory in a
“Do It Yourself” package at a fraction of the cost. This performance proven kit is made from light weight 3” x 2”
x .083” wall tubing, mandrel bent and fixture welded for absolute accuracy. The kit can be setup for either a four link
or a ladder bar suspension and comes complete with the frame rails, back cross member, top shock mounts within
the cross member for coil-over shocks, “A” frame housing locator mounts and a driveshaft hoop.
The kit can be purchased as an un-welded kit with all the pieces shown above or as a ready to install fully welded kit
(pictured above). Both kits include an 18 page instruction booklet (with lots of pictures) showing you where to cut the
body and how to install the frame kit. Due to different transmission lengths, the driveshaft hoop is tack welded in the
frame so that it can be positioned and fully welded by the installer.
NOTE: Welded frame kits must be shipped by truck. There is a skid and packing charge for truck shipments and the
shipping charges are freight collect (meaning the customer pays the truck freight COD).
ANTI ROLL BAR SYSTEM
The ed Quay anti-roll bar system for the 1982 - 92

Camaro is designed for strength with the ability to be
adjusted for various torque/horsepower requirements.
It may be ordered as a factory installed option or
purchased separately for later installation. The kit
includes the mounts (both chassis and housing), the
anti-roll bar with aluminum pivot blocks, the linkage
(with LH and RH rod ends for easy adjustment) and
all the necessary grade 8 hardware.
PN 100-2073 Anti-roll bar system installed

Pottstown, Pa 19464
Track Tested,
Need We Say More?
REAR HOUSING
We suggest using a 9” Ford housing for strength and availability of ratios. You can choose either the Strange
Engineering stock type housing which is legal for Super Stock applications or Chris Alston’s “Fab 9” housing (not
legal for Super Stock). No matter which you choose they come with a full back brace, an under the housing tube
supporting the 4 link plates, adjustable shock mounts and your choice of housing ends.
All ed Quay housings are fixture welded to assure exact bracket placement in relation to the housing centerline and
proper alignment of the ends to the 3rd member. 12 bolt or Dana 60 housing built to ed Quay’s exacting standards
are also available.
PN 100-2100
Pictured is the ed Quay 4 Link setup using the Chris Alston “Fab 9” housing (not legal for Super Stock).
PN 100-2107
Pictured is the Strange Engineering housing with the ed Quay 4 Link setup. This housing is legal for Super Stock applications.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
FOUR LINK KITS

PN 100-2060 The ed Quay designed four link kit has mounting
brackets laser cut from 1/4” steel, the holes are
arced to minimize adjustment when changing link
positions for varying track conditions. The
housing brackets incorporate wheelie bar mounts.
In our standard kit both links are constructed of
1” x .156” wall tubing directly threaded 3/4”NF
with a nut welded to the LH end of the tube for
ease of turning when adjustments are needed.
Each link has LH & RH threads for precise
adjustments required in today’s high horsepower
cars. Eight 3/4” shank 5/8” bore 4130 rod ends
with jam nuts complete the package. The mounting bolts have the shoulder going all the way through both brackets
so they cannot move when tightened. As with all ed Quay kits all the grade 8 hardware needed is included.
Our HD four link kit has all the features of our

standard kit except that the lower links are PN 100-2065
manufactured of the much more rigid 1 1/4” x .095”
4130 tubing. Threaded tube ends are welded in
place and as an added safety feature rosette welds
are also incorporated in them. We’ve upgraded the
lower links in this kit because engineering data
suggests that anything in compression (the lower
links are in compression under load) should be
twice as strong as that which is in tension. (The top
links are in tension under load). Also available with
17-4 stainless rod ends for the VERY serious racer
or urethane bushed for street use.
“A” FRAME HOUSING LOCATOR
The safest and most exacting way to center your housing.

Made from 7/8” x .156” wall tubing with ends tapped for 5/8”
rod ends (two mild steel in front and one 4130 for the rear
mount). The rear mount features a unique sliding tube
assembly honed to fit and with a factory installed grease fitting
to allow the rear complete freedom of movement at all times.
Make’s rear housing R & R a quick and effortless task. Front
PN 100-2070 mounts available for round or box tubing frame.
To order, please specify what type of rear is being used..

Pottstown, Pa 19464
Track Tested,
Need We Say More?
LADDER BARS
PN 100-2082
ed Quay Ladder Bars are available in 2 configurations, adjustable without removing the mounting
bolts (pictured at top) and non-adjustable (pictured below). Both feature a unique front tubing
configuration allows 2 separate rod end mounting positions for finer adjustments.
Precision made from 1” x .156” wall steel tubing

PN 100-2080 to give you the strength and reliability to hold up
under repeated hard launches. The tubing ends
are tapped 3/4” NF for maximum strength. (No
unsafe weld spuds are used). Bars come with
four 4130 rod ends and two mild steel rod ends,
laser cut 1/4” steel rear mounting plates.
The front safety straps that allow jam nuts to be tightened and are reversible so that the front rod end can be
moved into either the upper or lower mounting position and the safety straps fit either way.
Grade 8 5/8” mounting bolts are used all around for your safety. Available in 31” or 34” lengths (center of housing
to center of front mount).
LADDER BAR FRONT CROSS MEMBER
PN 100-2075
Cross member made from 1 3/4” mild steel tubing, 35” wide and dropped in the center for
driveshaft clearance. Mounting plates are laser cut from 1/4” steel. Two 1 1/4” steel tubing support
bars (not shown in photo) are also included for your safety.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
TRACK BAR - HOUSING LOCATOR ADJUSTABLE LOWER SHOCK MOUNTS
PN 100-2095
An economical way to keep the rear housing

square and safe under all conditions. Made from
7/8” x .156” wall tubing with an adjustment nut
welded on and tapped left and right hand for
PN 100-2098
quick, easy adjustment. We use 5/8” rod ends
bushed down to 1/2”. Jam nuts and mounting
brackets are included.
Adjust the ride height of your car in minutes without
removing the shocks. Three inches of adjustment
allows you to fine tune the ride height. All hardware
included.
WHEELIE BARS
PN 100-2120
Don’t let an out-of-control wheel stand put you on the

trailer. Ed Quay Wheelie Bars are spring loaded to help
absorb the shock without unloading your suspension.
These bars are designed for direct bolt-on to Ed Quay’s
4-link rear housing brackets. Also available for ladder bar
type suspension.
Shown attached to housing for illustration purposes only.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
REAR SHOCKS LAMB REAR SPRINGS
Koni #82-1907-SPA-1
Single adjustable with 5 1/2” of travel. Includes
stainless steel spherical bearing kit with C-clip lock
rings.
Koni #8211-1126-B-SPA-1
The highest quality shock for the serious racer.
When every 1/1000th of a second counts, this is the
only choice. These units have been dyno checked
and perfectly matched so both sides of the car work
together to give a straight, quick, fast run. Although
these shocks are more expensive, they will provide
the ultimate performance for you.
Precision wound from chrome silicone steel to exacting
specifications. These springs are made with the same
technology used to manufacture competition valve
springs. Springs are one of the most overlooked
components for getting maximum performance from
your car’s suspension. Our choice is always Lamb.
The Strange Engineering Double Adjustable Shock

Absorber is a very viable alternative for the rear
suspension. Being separately adjustable in rebound and
compression makes them adaptable to varying track
conditions and car settings. Strange Engineering uses
Hypercoil springs which have long life, maintaining rate
and length equally as well.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
MARK WILLIAMS AXLES STRANGE ENGINEERING
ed Quay Race Cars is a dealer for the complete line

of Mark Williams rears, axles and all related parts.
We believe these are highest quality and longest
lasting parts on the market today, and we strongly
recommend them. All Mark Williams 35 and 40
spline axles are warranted against breakage for five
years.
ed Quay is also a full line dealer for Strange

Engineering. Their products are a more
economical high quality driveline component
used by many top name competitors. "Pro
Race" Strange axles are guaranteed for 5
years against breakage. They produce a
quality product at a reasonable cost.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
ROLL CAGE KIT
Frame rails not part of kit. Shown for demonstration purposes only.
PN 100-2000 STANDARD UNFITTED KIT includes sixteen point roll cage that provides the safety and
strength needed for today’s fast cars. Made from 1 5/8” x .083” wall 4130 tubing, this kit meets and
exceeds all motor sports rules. Kit includes all gussets and floor plates.
PN 100-2005 FITTED KIT includes all of the above plus all tubing is fish-mouthed and floor plates are bent
to fit for that finished, professional look.
Our Roll Cage instructions are written as to show the sequence of installation and includes 15 pictures
to show exactly how to install it.
WINDOW NET MOUNTING KIT

w/net #0040
PN 100-2010
We use 1/2” O.D. tubing for lightweight safety. Both mounting bars bolt onto tabs welded to the roll cage
to make removal for maintenance a snap. The top bar attaches at the front with a seat belt latch for quick
and easy entry/exit. Mounting tabs, grade 8 hardware and lock nuts with kit.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
SHEET METAL
WINDSHIELD - FIREWALL COVERS IGNITION MOUNTING PLATE
PN 100-6000
Necessary when installing a roll cage in the car. The PN 100-6005

dash must be cut to fit the tubes and these covers
cap-off the cut out areas. There are also two areas at Keep your ignition isolated from water, dirt and harmful
the base of the windshield that must be sealed in order under hood heat. The Quay Ignition Mounting Plate is
to keep out water. The heater hole and other openings designed to fit in the passenger foot rest area. A 12” x
in the firewall are also covered with this kit. The patch 12” x .090” aluminum mount is attached to the floor
panels can be welded or riveted. using four 1/4 panel fasteners and plates (plates may
be welded or pop-riveted in place). All 1/4 turn panel
fasteners, plates and springs are included.
FITTED WHEEL TUBS
4 LINK COVER KIT
PN 100-6010
Here’s a revolutionary idea in wheel well installation. We

start with a 40” diameter tubs with a 16” deep inside
PN 100-6025
piece. Then we give you an outer wrapper that has been
cut to fit the quarter panel. The wrapper gets pop riveted Welded kit shown Some of the stock floor must be cut
to inner piece to form a full 24” deep tub. If you’ve ever away to have enough room for suspension adjustments.
wrestled with wheel tubs, you can see that we take the Cover this area and give your car that finished,
aggravation out of this thankless job. Made from .025” professional look with our pre-cut sheet metal kit, made
steel for durability, the same weight as thicker aluminum from 20 gauge steel for durability.
tubs. Patch panel for gas filler included with kit.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
ENGINE - TRANSMISSION
MOTOR PLATES MID PLATE - contour fitted Chevrolet
PN 100-3010 SBC - fitted - Quay location

PN 100-3050
PN 100-3015 SBC - fitted - stock location (shown)
PN 100-3020 BBC - fitted - Quay location
PN 100-3025 BBC - fitted - stock location Designed to help eliminate engine “twist”, stops
Eliminates Cylinder wall distortion created by stock transmission case breakage and holds motor in
side mounts and makes motor changes effortless. place when changing transmissions. Made
Made from 1/4” 6061 T-6 aluminum and bolts to tabs from .090 steel and bolts to tabs welded to
welded to top of frame. All hardware included. Specify frame (tabs supplied with plate). Fits Big or
Big or Small Block. Small Block Chevy.
MOTOR MOUNTS (solid)
PN 100-3035 PN 100-3030
SBC - stock location SBC - Quay Location
Made especially for the “F” body Camaro/Firebird. They mount the engine low for
maximum hood clearance and for good ground clearance. By using these mounts in
conjunction with our headers, the engine is positioned exactly the same as our cars.
Please specify Big Block or Small Block with order.
Note: By design, the engine placement is not centered in the car.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
ENGINE LIMITER KIT
PN 100-3000 Quay location

PN 100-3005 Stock location
Necessary when using front motor plates. Stops motor
from moving front to back. Tapped left and right hand to
allow for quick, easy tension adjustment. Bolts to stock
side mounts and tabs welded on K-member.
All hardware included.
TRANSMISSION MOUNT CROSS MEMBER
PN 100-3055 PG/350 - fits Quay rails

PN 100-3060 Turbo 400 - fits Quay rails
Eliminate transmission flex from stock rubber mounts.
Cross member bolts to welded tabs supplied with kit.
Makes an easy job of placing the motor in the chassis,
where you want it. Bolts directly to the transmission for
easy installation. Specify transmission type -
Powerglide/Turbo 350 or Turbo 400.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
FRONT SUSPENSION
FRONT END TRAVEL LIMITERS FRONT COIL SPRINGS
PN 100-4000
PN 100-4005 SBC
PN 100-4010 BBC
Compensate for track conditions with a quick, under

hood adjustment when made with a single 3/8” all
thread top mount. A 1/8” cable runs thorough tab
bolted or welded to lower control arm, up to the shock To make sure the front end works in harmony with
tower. All hardware included. the rear, ed Quay Race Cars can match springs to
your combination. We will choose the proper rate
springs and adjust their height to suit your application.
This assures just the right amount of weight transfer
to plant your tires consistently, hard run after hard run
(which translates into win after win!).
“K” MEMBER
PN 100-4015
Ed Quay Race Cars introduces the next step in kit cars. A completely reworked “K” member for the
‘82 - ’92 Camaro/Firebird. The K-member is cut and welded in a fixture for repeatable accuracy. This
modification allows the acceptance of full kickout oil pans (big or small block), gives maximum possible
clearance for headers and relocates the lower “A” arm mounts for more caster to insure straight tracking.
The “K” member is sold on an exchange basis (customer to provide a clean, usable core at time of
purchase). Can be shipped UPS.
Also available is a “K” member with a bolt in center piece for oil pan removal without engine movement.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
STEERING
MODIFIED IDLER ARM
To retain the proper front end geometry when using

a Vega steering box, the idler arm length should be
changed. Using your idler arm, or supplying you
with a new unit, we make modifications to equal the
PN 100-7025 Vega box pitman arm length. A front end that tracks
straight means better handling and lower E.T.’s.
VEGA STEERING BOX
The manual Vega Steering Box is a

lightweight direct bolt on replacement for the
heavy stock power steering unit. This brand
new steering box is being manufactured using
the OEM GM drawings and molds. Comes
with the stock style pitman arm. The "F" body
steering linkage is an exact match to the Vega PN 100-7030
pitman arm.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
TIE ROD KIT STEERING DAMPER KIT
PN 100-7000
PN 100-7010
This kit replaces the stock tie rods to aid in the

adjustment for “0” toe change through full front This weld-on kit is designed to minimize front
suspension travel. Manufactured form 7/8” x .156” wheel shimmy that occurs after a wheel stand.
wall tubing, tapped 5/8” left and right hand with an The kit is easy to install and allows the oil pan
adjusting nut welded onto the tube. It uses one to center link clearance to be maintained.
stock tie rod end and one rod end (included) and
comes with all the necessary Grade 8 hardware.
Customer is required to drill the stock steering
spindle arm.
BOTTOM HALF - STEERING COLUMN
PN 100-7005
We use lightweight aftermarket “U” joints and 4130 aircraft tubing to fabricate this steering
shaft. The bottom “U” joint is splined to fit the Vega steering box and the top half is fabricated
to mate to the stock type steering column at the firewall.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
FUEL - BATTERY
FUEL CELL FUEL CELL & BATTERY MOUNT
The safest and lightest type of gas

tank is a fuel cell. The Quay Fuel
Cell is made of a molded polymer
with seamless
construction to assure high
strength. Foam baffling prevents
slosh and delivers maximum
PN 100-5015
protection against explosion.
Comes standard with a flush
mounted filler neck, one AN-10
pick-up fitting in a 2” sump, and Constructed of steel tubing and 1/8" steel
one AN-8 fitting for vent or return. flat stock this lightweight mount for 2
Available in 4, 5, 8, 12, & 16 gal. batteries and a 4 gallon upright fuel cell
PN 100-5000 may be purchased separately.
STREET CAR FUEL CELL & MOUNT
PN 100-5010
PN 100-5017
Made to fit in luggage area of ‘82 - ’92 Camaro/

Firebird and is easily adaptable to most For street driven cars ed Quay has developed
applications. Mount will hold two large batteries an 11 gallon fuel cell that also fits the luggage area
and has tabs for direct bolt-on of 4 gal. upright fuel and incorporates a mount for your pump / filter
cell. The mounting straps are 1 1/8” x .090” combination. It features a single #10 AN outlet and
aluminum, custom bent to fit the style of fuel cell. a vented fill cap to make installation a breeze.
Pump and filter are in picture to demonstrate placement, they are
All Grade 8 mounting hardware is included in the not included in kit.
kit. Standard cell is a 4 gal. upright model with
mounting kit and battery hold downs included.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
FUEL CELL & BATTERY COVER KIT
PN 100-6030
The F-body cars have a luggage compartment in the rear that we utilize for the fuel cell and batteries. To
isolate the driver’s compartment from the fuel cell, ed Quay Race Cars makes an aluminum kit to not only
provide for the driver’s safety, but also give easy access to top-off fuel cell and charge the batteries. An
aluminum case is pop-riveted into place and 1/4 panel fastener buttons hatch is used for effortless,
between rounds refueling. Because the fuel cell sump extends through the floor (no gas lines are routed
inside the car), we provide a cover that uses 1/4 turn panel fasteners under the luggage area. This not
only keeps out water and dirt, but also gives that finished, professional look for which we all strive. Kit
includes aluminum covers in luggage area, cover under fuel cell, two side covers (frame to outer fender
behind wheel tub) and all hardware required for simple installation.
STREET CAR FUEL CELL COVER KIT
100-5017
ed Quay Race Cars also makes an aluminum cover kit for the large Street Car Fuel Cell.. This kit isolates
the driver compartment from the fuel cell and pump area. It features a 1/4 turn fastener access panel for
quick and easy fueling.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
SEAT MOUNTS - fits Poly Seat SEAT MOUNTS - fits Kirky Seats
Driver
PN 100-2160
Passenger
Driver Passenger PN 100-2165
PN 100-2150 PN100-2155
ed Quay’s driver side adjustable seat mount for the
If your class allows the use of aftermarket, very popular Kirky Aluminum Racing Seat allows
lightweight seats, then we have the perfect way multiple settings for driver comfort. The passenger
to install them. Our seat mount bolts directly to side mount is a fixed single position mount.
the polyurethane seat and to the stock GM seat
studs. The driver side has adjustable rails for
individual comfort and the passenger side is set
in one position.
REAR WEIGHT BOX
REAR WEIGHT BAR
PN 100-2130
If you have to add weight for class minimums, to PN 100-2135

compensate for scale differences or to adjust for
slippery track conditions, Quay has the answer! A Another aid to compensate for rules or conditions.
rulebook legal weight box that mounts between the We use 3” x 2” x 24 1/2” tubing and install a pipe
wheel wells, over the rear housing, to give thread filler hole. Mounts to rear cross member with
maximum static weight on the tires. 12” x 8” x 9” two 1/2” x 2 1/2” bolts. When filled with lead shot, a
deep, made from 1/8” steel with top lip turned out total of 36 lbs. can be added behind the rear axle.
for easy installation. Just cut hole to size and drop Weld-on tabs for weight bar supplied with kit.
in box. Will hold up to 100 lbs. where rules permit.
Complete with top plate and hold down bolts.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
BRAKES
QUAY MASTER CYLINDER KIT

w/pedal modification
Get rid of a lot of unwanted weight by replacing the

stock power booster master cylinder with the ed
Quay Master Cylinder Kit. The kit features an
1 1/8" bore master cylinder and aluminum adaptor
plate that bolts to the 4 stock holes in the firewall.
The stock firewall linkage hole must be enlarged
upward to clear the pedal relocated linkage. ( The
steel part of your brake pedal must be sent to us for
modification of the linkage mount.) The kit also
includes all hardware needed to both bolt it to the car
PN 100-1000 and to adapt 3/16" brake lines to the master cylinder.
LAMB BRAKES
Unquestionably the highest quality products on the market today. Lamb Components produces each
kit for a specific application and therefore eliminates the need for spacers and adapters. When no
concessions to price have to be made, Lamb Components are the only choice.
Choose from:
Lamb Master Cylinder & Pedal Assembly

Must use Lamb Brakes - Cannot be purchased separately
Lamb Front Brake Assembly PN 100-1010
Lamb Spindle Modification for Brakes PN 100-1015
Lamb Rear Brakes PN 100-1020
Lamb Braided Brake Line Kit (from chassis to wheels)
Lamb Stage Gauge

Pottstown, Pa 19464
Track Tested,
Need We Say More?
1982 - 92 CAMARO - FIREBIRD
Brakes
100-1000 Quay Master Cylinder Kit w/pedal modification $309.05
100-1005 Quay Master Cylinder Kit w/o pedal modification $259.55
100-1010 Lamb Front Brake Assembly $1,407.95
100-1015 Lamb Spindle Modification for front brakes (per spindle) $83.55
100-1020 Lamb Rear Brakes $923.95
100-1025 Braided Brake Line Kit $164.955
Chassis
100-2000 Roll Cage Kit - unfitted - 4130 chrome moly $831.55
100-2005 Roll Cage Kit - fitted - 4130 chrome moly $1,241.85
100-2010 Window Net Mounting Kit w/net # 0040 $98.95
100-2015 Frame Rail Kit - fully welded $655.90
100-2020 Frame Rail Kit - unwelded (can ship UPS) $468.45
All fully welded frame kits must ship by truck (Freight Collect)
100-2025 Weld - Front 4 Link plates to frame $88.00
100-2030 Frame Rail Kit w/housing & 4 Link - fully welded for $2,347.35
12 bolt/ Dana 60 Package - includes housing, your choice of housing ends,
4 link suspension, upper shock mounts, lower adjustable shock mounts,
sliding "A" frame housing locator & mounts, driveshaft hoop.
100-2035 Frame Rail Kit w/housing & 4 Link - fully welded 9" Ford Package $2,591.55
includes Fab 9 Housing with brace, your choice of housing ends, 4 link
suspension, upper shock mounts, lower adjustable shock mounts, sliding
"A"housing locator & mounts, driveshaft hoop -
100-2040 Frame Rail Kit w/housing & Ladder Bars - fully welded $1,889.75
w/12 bolt/Dana 60 Package - includes housing, your choice of housing ends,
ladder bar suspension, upper shock mounts, lower adjustable shock mounts,
track bar housing locator & mounts, driveshaft hoop.
100-2045 Frame Rail Kit w/housing & Ladder Bars - fully welded 9" Ford Package $2,294.55
includes Fab 9 Housing with brace, your choice of housing ends, ladder bar
suspension, upper shock mounts, lower adjustable shock mounts, track bar
housing locator & mounts, driveshaft hoop -
100-2050 Skid Charges for Frame Rail Kits $104.50
100-2055 Skid & box Charges for Frame Rail Kits & Roll Cage $154.00
100-2060 4 Link Kit - standard bars w/moly rod ends $655.55
100-2065 4 Link Kit - Super - same as above w/stronger - $708.35
1 1/4" x .095 - 4130 bottom bar
100-2070 "A" Frame Housing Locator $314.55

Pottstown, Pa 19464
Track Tested,
Need We Say More?

Chassis (cont.)
100-2073 Anti - Roll Bar System - welded $544.50
100-2074 Anti - Roll Bar System - unwelded $412.50
100-2075 Ladder Bar Front Cross Member - w/mounts $120.95
100-2080 Ladder Bars w/4130 chrome moly rod ends $296.95
100-2082 Ladder Bars w/4130 chrome moly rod ends - double adjustable $324.45
100-2085 Ladder Bars w/mild steel rod ends $248.55
100-2087 Ladder Bars w/mild steel rod ends - double adjustable $276.05
100-2095 Track Bar - housing locator $98.95
100-2098 Adjustable Lower Shock Mount $65.95
100-2100 Fab 9 Ford Housing w/ends - incl. ladder bar mounts, adjustable shock $1,176.95
mounts, wheelie bar mounts, housing end studs, drain, fill & vent - fully welded
100-2102 Strange Ford Housing w/ends - incl. Ladder bar mounts, adjustable shock $1,176.95
mounts, wheelie bar mounts, housing end studs, drain, fill & vent - fully welded
100-2105 Fab 9 Ford Housing w/ends - incl. 4 link mounts, adjustable shock mounts, $1,373.85
wheelie bar mounts, housing end studs, drain, fill & vent - fully welded
100-2107 Strange Ford Housing w/ends - incl. 4 link mounts, adjustable shock mounts, $1,373.85
wheelie bar mounts, housing end studs, drain, fill & vent - fully welded
100-2110 Wheelie Bars - Leaf Style - 4 Link $395.95
100-2115 Wheelie Bars - Leaf Style - Ladder Bars $307.95
100-2120 Wheelie Bars - Tube Style - 4 Link $479.55
100-2125 Wheelie Bars - Tube Style - Ladder Bars $395.95
100-2130 Rear Weight Box $116.55
100-2135 Rear Weight Bar $87.95
100-2140 Jaz Polyethylene seat w/black vinyl cover $105.55
100-2145 Kirky Aluminum seat w/black velour cover $237.55
100-2150 Seat Mount - fits Poly seat - driver side - w/adj. tracks $165.95
100-2155 Seat Mount - fits Poly seat - passenger side - non-adjustable $59.95
100-2160 Seat Mount w/adjustable tracks - fits Kirky aluminum seat - drivers side $175.95
100-2165 Seat Mount - non-adjustable - fits Kirky aluminum seat - passenger side $59.95
100-2151 Seat Mount - fits Poly seat - driver side - w/o adj. tracks $119.95
Engine - Transmission
NOTE: Quay SS location = set back & lowered engine
100-3000 Engine Limiter Kit - Quay location $109.95
100-3005 Engine Limiter Kit - Stock location $116.55
100-3010 SBC Motor Plate - fitted - Quay location - Must use Engine Limiter Kit $172.65
100-3015 SBC Motor Plate - fitted - stock location - Must use Engine Limiter Kit $186.95
100-3020 BBC Motor Plate - fitted - Quay location - Must use Engine Limiter Kit $172.65
100-3025 BBC Motor Plate - fitted - stock location - Must use Engine Limiter Kit $186.95
100-3030 SBC Motor Mounts (solid) - Quay location - incl. all necessary hardware $148.45
100-3035 SBC Motor Mounts (solid ) - stock location - incl. all necessary hardware $76.95
100-3040 BBC Motor Mounts (solid) - Quay location - incl. all necessary hardware $148.45
100-3045 BBC Motor Mounts (solid) - stock location - incl. all necessary hardware $76.95

Pottstown, Pa 19464
Track Tested,
Need We Say More?
Engine - Transmission (cont.)

100-3050 Mid Plate - fitted - Chev. - .090 steel - Quay & stock location $109.95
100-3055 Trans. Mt. Cross Member - PG/350 - fits Quay rails $164.95
100-3060 Trans. Mt. Cross Member - Turbo 400 - fits Quay rails $164.95
Front Suspension
100-4000 Front end Travel Limiters $76.95
100-4005 SBC Front Coil Springs - pair $148.45
100-4010 BBC Front Coil Springs - pair $148.45
100-4015 "K" Member - modified full (must supply usable core) $446.55
100-4020 "K" Member - modified full w/removable center (must supply usable core) $556.55
100-4025 "K"Member - drop center only (must supply usable core) $248.55
100-4030 "K" Member - dropped & removable center only (must supply usable core) $358.55
Fuel - Battery
100-5000 Fuel Cell - 4 gallon - upright $203.45
100-5005 Fuel Cell Mounting Straps $32.95
100-5010 Fuel Cell & Battery Mount - w/fuel cell $533.45
100-5015 Fuel Cell & Battery Mount - w/o fuel cell $333.25
100-5017 Fuel Cell & Mount -w/11 gallon fuel cell for street use $313.45
100-5020 Dual Battery Mount $219.95
100-5002 Fuel Cell - 11 gallon $192.45
Sheet Metal
100-6000 Sheet Metal Covers - Windshield/Firewall $153.95
100-6005 Ignition Mounting Plate $98.95
100-6010 Fitted Wheel Tubs - steel $248.55
100-6015 Fitted Wheel Tubs - aluminum $296.95
100-6020 4 Link Cover Kit $82.45
100-6025 4 Link Cover Kit - welded $142.95
100-6030 Fuel Cell & Battery Cover Kit - 4 Gal. $324.45
100-6035 Fuel Cell & Battery Cover Kit - 11 Gal. $219.95
Steering
100-7000 Tie Rod Kit - "0" bump steer $98.95
100-7005 Steering Column (after market bottom half) fits Vega/Monza steering box $163.85
100-7010 Steering Damper Kit $65.95
100-7015 Steering Damper - only $38.45
100-7020 Idler Arm (new) - modified to match Vega pitman arm center to center $137.45
100-7025 Idler Arm - modified (customer exchange) to match Vega $54.95
pitman arm center to center
100-7030 Vega Steering Box with pitman arm $489.45

Pottstown, Pa 19464
Track Tested,
Need We Say More?
How’s this for a list of CUSTOMERS ?

1999 Gator Nationals Gainesville, FL
1999 GT/BA Record Holder

S/S Winner
KEN BUGAJ / BERT POWELL
Lincoln Morehead purchased his Camaro from Jim Boburka in

1990. "It was built by ED QUAY, and it was the car that Jim
drove to his first Winston Super Stock championship in 1987."
1997 Fram Nationals Atlanta Ga

Comp. Winner
Jeg Coughlin Jr's '93 Camaro, which is based on an ED

new
QUAY chassis, was modified for Comp racing at his family's ut the ur
Jegster shop with the installation of a five-speed transmission Ed Qu
ay
u a li ne abo h one of yo l
ro p y o s e t w it a ti o na
and new rear end. to d that w
as
Delma
rN
anted a
Just w onal Record I set it at the never built d
B A N ati aj a n d 2 . I h ad I s tu d ie
GT
rs . K en Bug .33@141.4 until this, so in my two
1997 Mile High Nationals Denver, CO kit ca ch at9 ground up y c ar g
in Mar built m id about doin -
Open car from the pletely and b e s a s w h e n
tubbed tructions co something
m to ost wa rs to
Comp. Winner
dm e m e
s is sw
your in ge. There presse and get an shock
ara that im u d
stall g lf. The part ould call yo spension an car.
e c u e
it yours ot in a bind I seline rear s are still in th d in
e r I g h e b a it ia ll y te re s te
ev .T in y in racing
blems ve me onestl
my pro that you ga you were h anies in the at
g s a t m p y th
settin e feeling th h many co have to sa
g o t th a lt w it a r a n d
I d e c
ject. I g my
Todd and Allan Patterson bought their winning car from Ken my pro while buildin est.
Voight, who set the A/SM NHRA national record with the car. s tr y n d li
indu e frie
The car was originally built by ED QUAY. was th
yours
eed!
1997 Autolite Nationals Sonoma, CA Godsp
owell ing
Bert P Powell Rac
u g aj & R d .
S/S Winner
B n
esteve 27127
1621 K -Salem, NC
s to n
Win
The GT/AA '90 Camaro that carried John Schless to the Autolite
Nationals title is owned by veteran Southern California racer Jiim
DeFrank Sr. The chassis was built by ED QUAY Race Cars in
Pottstown, Pa.

Pottstown, Pa 19464
Track Tested,
Need We Say More?
VISIT US!

Pottstown, Pa 19464

Ed Quay Race Cars Catalog PDF

Uploaded by

Copyright:

Available Formats

Ed Quay Race Cars Catalog PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ed Quay Race Cars Catalog PDF

Uploaded by

Copyright:

Available Formats

What is the product being advertised?

What is the product being advertised?

What customer testimonials are provided?

What customer testimonials are provided?

‘82 - ‘92

948 Commerce Drive (Route 100 & State Street)

948 Commerce Drive (Route 100 & State Street)

Sheet Metal page 12

Engine - Transmission page 13 & 14

Front Suspension page 15

Steering page 16 & 17

Fuel Cell - Battery Mounts &

Seat Mounts - Weight page 20

Price List - page 22 to 24

948 Commerce Drive (Route 100 & State Street)

ANTI ROLL BAR SYSTEM

The ed Quay anti-roll bar system for the 1982 - 92

PN 100-2073 Anti-roll bar system installed

948 Commerce Drive (Route 100 & State Street)

948 Commerce Drive (Route 100 & State Street)

FOUR LINK KITS

Our HD four link kit has all the features of our

“A” FRAME HOUSING LOCATOR

The safest and most exacting way to center your housing.

948 Commerce Drive (Route 100 & State Street)

Precision made from 1” x .156” wall steel tubing

LADDER BAR FRONT CROSS MEMBER

948 Commerce Drive (Route 100 & State Street)

TRACK BAR - HOUSING LOCATOR ADJUSTABLE LOWER SHOCK MOUNTS

An economical way to keep the rear housing

Don’t let an out-of-control wheel stand put you on the

948 Commerce Drive (Route 100 & State Street)

REAR SHOCKS LAMB REAR SPRINGS

The Strange Engineering Double Adjustable Shock

948 Commerce Drive (Route 100 & State Street)

MARK WILLIAMS AXLES STRANGE ENGINEERING

ed Quay Race Cars is a dealer for the complete line

ed Quay is also a full line dealer for Strange

948 Commerce Drive (Route 100 & State Street)

ROLL CAGE KIT

WINDOW NET MOUNTING KIT

948 Commerce Drive (Route 100 & State Street)

WINDSHIELD - FIREWALL COVERS IGNITION MOUNTING PLATE

Necessary when installing a roll cage in the car. The PN 100-6005

4 LINK COVER KIT

Here’s a revolutionary idea in wheel well installation. We

948 Commerce Drive (Route 100 & State Street)

PN 100-3010 SBC - fitted - Quay location

MOTOR MOUNTS (solid)

948 Commerce Drive (Route 100 & State Street)

ENGINE LIMITER KIT

PN 100-3000 Quay location

TRANSMISSION MOUNT CROSS MEMBER

PN 100-3055 PG/350 - fits Quay rails

948 Commerce Drive (Route 100 & State Street)

FRONT END TRAVEL LIMITERS FRONT COIL SPRINGS

Compensate for track conditions with a quick, under

948 Commerce Drive (Route 100 & State Street)

MODIFIED IDLER ARM