PC

130
PC130-8 HORSEPOWER
Gross: 72.1 kW 96.6 HP / 2200 min-1
Net: 68.4 kW 91.7 HP / 2200 min-1
OPERATING WEIGHT
12380 – 12740 kg
BUCKET CAPACITY
0.18 – 0.60 m3

Photos may include optional equipment.

WALK-AROUND

Photos may include optional equipment.

2
 HYDR AULIC EXCAVATOR PC130-8

ECOLOGY & ECONOMY

Low Emission Engine Is U.S. EPA Tier 3 and EU
Stage 3A Emissions Certified.
Low Operation Noise

COMFORT & SAFETY

ROPS Cab (ISO 12117-2)
Low-noise Cab
Wide Spacious Cab
Rear View Monitor System (Optional)

* Information and Communication Technology

ICT* & KOMTRAX

Large Liquid Crystal Display (LCD) Monitor
Equipment Management Support
KOMTRAX

RELIABILITY & DURABILITY

High Rigidity Work Equipment
Reliable Komatsu Manufactured Major Components

MAINTENANCE
Easy Maintenance
Long-life Oil and Filter

PC130-8
HORSEPOWER Gross: 72.1 kW 96.6 HP / 2200 min-1
Net: 68.4 kW 91.7 HP / 2200 min-1
OPERATING WEIGHT 12380 – 12740 kg
BUCKET CAPACITY 0.18 – 0.60 m3

3
ECOLOGY, ECONOMY & PRODUCTIVITY

TOTAL VEHICLE CONTROL

Komatsu Technology

Komatsu develops and produces all 7-inch LCD color monitor

major components in house such as

engines, electronics and hydraulic
components. Combining “Komatsu
Hydraulic control valve
Technology” and customer feedback,
Komatsu is achieving great advance-
ments in technology. To achieve both
high levels of productivity and eco- Hydraulic system
nomical performance, Komatsu has controller

developed the main components with a

total control system. The result is a new
generation of high performance and
environment-friendly excavators.

Electronic control unit

for engine

Main pump
Engine
Heavy duty High Pressure
Common Rail (HPCR) system

Low Emission Engine Low Operation Noise

Komatsu SAA4D95LE-5 is U.S. EPA Tier 3 Enables low noise operation using the low-noise engine and
and EU Stage 3A emissions certified. methods to cut noise at source.
Electronically controlled common rail type engine
• Multi-staged injection
Low noise design
• Optimal arrangement of sound absorbing materials
• Partition between the cab and engine room

CG image

4
 HYDR AULIC EXCAVATOR PC130-8

Working Modes Selectable Idling Caution

The PC130-8 excavator is equipped with five working modes To prevent unnecessary
(P, E, L, B and ATT mode). Each mode is designed to match fuel consumption, an
engine speed and pump speed with the current application. idling caution is displayed
This provides the flexibility to match equipment performance on the monitor, if the
to the job at hand. engine idles for 5 minutes
Working Mode Application Advantage or more.

• Maximum production/power
P Power mode
• Fast cycle times

• Good cycle times Large Digging Force

E Economy mode • Better fuel economy
• Adjustable in 4 stages When press the left knob switch which is called the one-touch
L Lifting mode • Suitable attachment speed power max. switch and when it is kept pressed, this function
temporarily increases digging force for 8.5 seconds of operation.
• Optimum engine rpm,
B Breaker mode
hydraulic flow Maximum arm crowd force (ISO 6015):
• Optimum engine rpm, 61.8 kN (6.3 t) 67.5 kN (6.8 t) 9 % UP
ATT Attachment mode (with Power Max.)
hydraulic flow, 2 way
Maximum bucket digging force (ISO 6015):
Work priority
P P mode 86.0 kN (8.7 t) 93.4 kN (9.5 t) 9 % UP
(with Power Max.)
Fuel priority
E E mode Measured with Power Max. function, 2500 mm
arm and ISO 6015 rating.
L L mode

B B mode
One-touch
ATT ATT mode power max. switch

The Economy mode is adjustable in 4 stages. It is select-

able from the economy mode adjustment selection menu as
appropriate. The Economy Mode Adjustment Larger Maximum Drawbar Pull
power output will
E0 Economy mode
be reduced when Larger maximum drawbar pull provides superb steering and
adjust from E0 to E1 Economy Adjustment 1 slope climbing performance.
E3, however, the Maximum drawbar pull: 122.6 kN 12500 kg
E2 Economy Adjustment 2
fuel consumption
will be better. E3 Economy Adjustment 3

ECO Gauge that Assists Energy-saving

Operations
The ECO gauge on the right side of the multi-function color
monitor provides environment-friendly energy-saving op-
eration. Allows focus on
operation in the green
range with reduced CO2
emissions and efficient
fuel consumption.

Photo may include optional equipment.

ECO gauge

5
COMFORT

Low-noise Cab Wide Spacious Cab Automatic A/C

The newly-designed cab is highly rigid Newly-designed wide spacious cab Enables you to easily and precisely set
and has excellent sound absorption includes seat with reclining backrest. cab atmosphere with the instruments
ability. Thorough improvement of noise The seat height and longitudinal incli- on the large LCD. The bi-level control
source reduction and use of low noise nation are easily adjusted using a pull- function keeps the operator’s head and
engine, hydraulic equipment, and air up lever. You can set the appropriate feet cool and warm respectively. This
conditioner allows this machine to gen- operational posture of armrest together improved air flow function keeps the
erate a low level of noise similar to that with the console. Reclining the seat fur- inside of the cab comfortable through-
of a passenger car. ther enables you to place it into the fully out the year.
flat state with the headrest attached. Defroster
function
Low Vibration with Cab
keeps front
Damper Mounting
glass clear.
PC130-8 uses viscous damper mount-
ing for cab that incorporates longer
stroke and the addition of a spring. The
new cab damper mounting combined
with high rigidity deck aids vibration
reduction at operator seat.

Rubber
Spring
Pressurized Cab
Silicon
Oil
A/C, air filter and a higher internal air
pressure prevent external dust from en-
tering the cab.

6
 HYDR AULIC EXCAVATOR PC130-8
SAFETY

ROPS Cab (ISO 12117-2) Lock Lever

The machine is equipped with a ROPS cab (ISO 12117-2) for Locks the hydraulic
excavators as standard equipment. The ROPS cab has high pressure to prevent
shock-absorption performance, featuring excellent durability unintentional move-
and impact strength. It also satisfies the requirements of OPG ment. Neutral start
top guard level 1 (ISO 10262) for falling objects. Combined function allows
with the retractable seat belt, The ROPS cab protects the machine to be started
operator in case of tipping over and against falling objects. only in lock position.

Large Side-view, Sidewise, Rear and Front

Under-view Mirrors
Enlarged side mirrors and addition of front under mirror allow
the PC130-8 to meet the visibility requirements (ISO 5006).

Rear View Monitor System (Optional)

The operator can view the rear of the machine with a color
monitor screen.

Slip-resistant
Plates
Highly durable slip-re-
sistant plates maintain
Monitor for rear view camera
superior traction per-
formance for the long
term. Thermal and Fan
Guards
Thermal and fan guards are
placed around high-tem-
Pump/engine Room Partition perature parts of the engine
and fan drive.
Pump/engine room partition prevents oil from spraying onto
the engine if a hydraulic hose should burst.

7
ICT

LARGE HIGH RESOLUTION LCD MONITOR

Large LCD Color Monitor

A large user-friendly color monitor en-

1 2 3
ables safe, accurate and smooth work.
Improved screen visibility is achieved
7
by the use of LCD that can easily be
read at various angles and lighting
conditions. Simple and easy to operate
6
switches. Industry first function keys
4 5 facilitate multi-function operations. Dis-
plays data in 12 languages to globally
support operators around the world.

1 2 3
Function
Basic switches
4 5 6 Indicators
operation
switches 1 Auto-decelerator 5 Hydraulic oil temperature gauge
2 Working mode 6 Fuel gauge
3 Travel speed 7 ECO gauge
4 Engine water 8 Function switches menu
temperature gauge
A/C
operation
Basic operation switches
switches
1 Auto-decelerator 4 Buzzer cancel
2 Working mode selector 5 Wiper
3 Traveling selector 6 Windshield washer

Equipment Management Monitoring System

Monitor function Maintenance function Trouble data memory function

Controller monitors engine oil level, Monitor informs replacement time of oil Monitor stores abnormalities for effec-
coolant temperature, battery charge and filters on LCD when the replace- tive troubleshooting.
and air clogging, etc. If controller finds ment interval is reached.
any abnormality, it is displayed on the
LCD.

8
 HYDR AULIC EXCAVATOR PC130-8
KOMTRAX

Equipment Management Support

Through the web application, a variety of search parameters

The Komatsu remote monitoring and are available to quickly find information about specific ma-
management technology provides chines based on key factors. Moreover, KOMTRAX finds
out machines with problems from your fleet and shows you
insightful data about your equipment
through an optimal interface.
and fleet in user-friendly format.

Energy Saving Operation Report

KOMTRAX delivers the energy-saving operation report based

on the operating information such as fuel consumption, load
summary and idling time, which helps you efficiently run a
business.

Location

Working status

Periodic maintenance

This report image is an example

of hydraulic excavator The report contents and data depend on the machine model.

Optimal Strategy for Efficient Work

The detailed information that KOMTRAX puts at your fingertips helps you manage your fleet
conveniently on the web anytime, anywhere. It gives you the power to make better daily and
long-term strategic
decisions.

9
RELIABILITY & DURABILITY

High Rigidity Work

Metal Guard Rings
Equipment
Boom and arms Metal guard rings protect all the hy-
are constructed of thick draulic cylinders and improve reliability.
plates of high tensile strength
steel. In addition, these structures Metal guard ring
(Cast iron ring)
are designed with large cross-sectional
areas and generous use of castings. The result
is working attachments that exhibit long term durability and high
resistance to bending and torsional stress.
Piston ring

Sealed Connectors Reliable Components Wear ring

Sealed connectors seal tight and have All of the major machine components,
higher reliability. such as engine, hydraulic pump, hy-
draulic motors and control valves are O-ring Face Seal
Waterproof seal
exclusively designed and manufactured
by Komatsu. The hydraulic hose seal method has
Waterproof
seal
been changed from a conventional ta-
per seal to an O-ring seal. This provides
improved
sealing perfor-
Waterproof seal
mance.

10
 HYDR AULIC EXCAVATOR PC130-8
MAINTENANCE

Easy Access to Engine Oil Filter, Engine

Side-by-side Cooling Sloping Track Frame
Main Fuel Filter and Fuel Drain Valve
Since radiator, aftercooler and oil cool- Engine oil filter, Prevents dirt and sand from accumulat-
er are arranged in parallel, it is easy to engine main fuel ing and allows easy mud removal.
clean, remove and install them. Radia- filter and fuel drain
tor, aftercooler, and oil cooler made of valve are remote
aluminum have high cooling efficiency mounted to im- Long-life Oil,
Filter
and are easily recycled. prove accessibility.
Uses high-performance
filtering materials and
long-life oil. Extends the
oil and filter replace-
ment interval. Hydraulic oil filter

Engine oil &

Engine oil filter every 500 hours
Hydraulic oil every 5000 hours
Hydraulic oil filter every 1000 hours

Equipped with the Drain Valve

as Standard Easy to Clean A/C Filter
Prevents clothes and the ground from
Equipped with the Fuel Pre- becoming contaminated due to oil leak- The A/C filter is removed and installed
filter (With Water Separator) age when replacing the engine oil. without the use of tools facilitating filter
maintenance.
Removes water
and contaminants
in the fuel to pre-
vent fuel problems.
(With built-in prim-
ing pump)
Internal A/C filter External A/C filter

Long Greasing Interval

(Optional)
Large-capacity Fuel Tank and
Washable Cab Floormat
Rustproof Treatment High quality bushings are optionally
available for work equipment pins ex-
The PC130-8’s cab floormat is easy to 247 L high-capacity fuel tank. Effective
cept arm top pin. All bushing lubrication
keep clean. The gently inclined surface corrosion resistance using rustproof
intervals of work equipment except arm
has a flanged floormat and drainage treatment.
top bushings are 500 hours, reducing
holes to facilitate runoff.
maintenance cost.

11
KOMATSU BRAND BUCKET

KOMATSU Brand Bucket for General Purpose with Wide Bucket Width

Category and Feature

Category Load / Wear / Soil (Application) Image

Load
Machine power is mostly medium, but occasionally high.
Bucket movements are smooth with minor shock load.
General Purpose Bucket penetrates easily.
GP Wear
Material is lightly abrasive. Some sand may be medium abrasive.
Soil
Mostly loose sand, gravel and finely broken materials.

Load
Machine power is high during majority of the work.
Medium, but continuous shock load.
Heavy Duty Wear
HD Material is abrasive. Light scratch marks can be seen at the
bucket.
Soil
Limestone, shot rock, compact mix of sand, gravel and clay.

Bucket Line-up
Capacity Width Weight Tooth Arm Length Tooth Type
Category
(m3) (mm) (kg) Quantity 2500 mm 3000 mm Vertical Horizontal
0.18 450 256 3 ✓
0.28 600 303 3 ✓ ✓
GP 0.36 700 330 4 ✓ ✓
0.50 859 399 4 ✓ ✓
0.60 1000 436 5 ✓ ✓
HD 0.50 859 450 4 ✓ ✓
: General purpose use, density up to 1.8 t/m3 : General purpose use, density up to 1.4 t/m3 : Not usable ✓ : Selectable

OPTIONS
• Full height guard level 1 (ISO 10262) • Rain visor • Sun visor

• Seat, suspension • Track frame undercover

12
 HYDR AULIC EXCAVATOR PC130-8
SPECIAL SPECS.

Accumulator
Attachment Piping Specification Pilot filter
Additional filter for breaker

Equips PC130-8 for breaker and crusher installation. Hy-

draulic flow rate can be regulated by setting Breaker Mode
on monitor panel during breaker operation.

Stop valve

Photo may include optional equipment.

Operating pedal

13
ATTACHMENT

Komatsu Genuine Attachment Tool

Komatsu-recommended attachment tools for hydraulic excavators

A wide range of attachment tools are provided to suit customers’ specific applications.

Hydraulic breaker
The hydraulic breaker is an attachment tool used for crushing rock beds and paved surfaces, demolishing
concrete structures, etc. The large gas chamber, ideal gas pressure ratio, and long-stroke piston deliver
a powerful impact force. Since the breaker unit does not require an accumulator, the number of
parts has been reduced, resulting in lower maintenance costs.

Photo is not PC130-8.

Crusher
This attachment tool is used for demolishing concrete structures. Since it does not have a striking mechanism and features low
noise and low vibration, it is suitable for work in urban areas. The open-close cylinder is equipped with a speed-up valve for
increasing work speed.

Pulverizer

Primary crusher

Applications of Attachment Tools

Application/ Industrial Waste
Civil Engineering Quarry Demolition Iron-making Utility Construction Rental
Attachment Tool Disposal

Hydraulic Breaker

Crusher (Primary Crusher)

Crusher (Pulverizer)

14
 HYDR AULIC EXCAVATOR PC130-8
KOMATSU TOTAL SUPPORT

Komatsu Total Support

To keep your machine available and minimize operation cost Technical support
when you need it, Komatsu Distributor is ready to provide a Komatsu product support service (Technical support) is de-
variety of supports before and after procuring the machine. signed to help customer. Komatsu Distributor offers a variety
of effective services to show how much Komatsu is dedicated
Fleet recommendation to the maintenance and support of Komatsu machine.
Komatsu Distributor can study the customer’s job site and • Preventive Maintenance (PM) clinic
provide the most optimum fleet recommendation with de- • Oil & Wear analysis program
tailed information to meet all of your application needs when • Undercarriage inspection service, etc.
you are considering to buy new machines or replace the
existing ones from Komatsu.

Repair & maintenance service

Komatsu Distributor offers quality repair and maintenance
service to the customer, utilizing and promoting Komatsu
developed programs.
Product support
Komatsu Distributor gives the proactive support and secures Komatsu Reman (Remanufactured)
the quality of the machinery that will be delivered. components
Komatsu Reman products are the result of
Parts availability the implementation of the Komatsu global
Komatsu Distributor is available for emergency inquiry by the policy which establishes and agrees to reduce the owning,
customers for genuine, quality guaranteed Komatsu parts. operating and total Life Cycle Costs (LCC) to Komatsu’s cus-
tomer through high quality, prompt delivery and competitively
priced in own remanufactured products (QDC).

15
SPECIFICATIONS

ENGINE SWING SYSTEM

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA4D95LE-5 Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic

Type. . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . .Grease-bathed
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 mm Holding brake/Swing lock . . . . . . . . . . . . . . . Mechanical disc brake
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 mm Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.0 rpm
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.26 L
Horsepower:
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . .Gross 72.1 kW 96.6 HP
ISO 9249 / SAE J1349 . . . . . . . . . . . . . . . . . .Net 68.4 kW 91.7 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2200 min-1 UNDERCARRIAGE
Fan drive method for radiator cooling . . . . . . . . . . . . . . Mechanical
Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
Governor . . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic
Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
U.S. EPA Tier 3 and EU Stage 3A emissions certified. Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sealed track
Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Number of shoes (Each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Number of carrier rollers (Each side) . . . . . . . . . . . . . . . . . . . . . . . 1
Number of track rollers (Each side). . . . . . . . . . . . . . . . . . . . . . . . . 7
HYDRAULICS

Type. . HydrauMind (Hydraulic Mechanical Intelligence New Design)

system, closed-center system with load sensing valves and
COOLANT AND LUBRICANT CAPACITY
pressure compensated valves (REFILLING)
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 5
Main pump: Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 L
Type . . . . . . . . . . . . . . . . . . . . . Variable displacement piston type Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.9 L
Pumps for . . . . . . . . Boom, arm, bucket, swing, and travel circuits Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.5 L
Maximum flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241.5 L/min Final drive (Each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.1 L
Supply for control circuit . . . . . . . . . . . . . . . . . Self-reducing valve Swing drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.5 L
Hydraulic motors: Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 L
Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake
Swing . . . . . . . . . .1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits . . . . . . . . . . . . . . . . . . . . 31.9 MPa 325 kg/cm2
Travel circuit . . . . . . . . . . . . . . . . . . . . . . . . . 34.8 MPa 355 kg/cm2 OPERATING WEIGHT (APPROXIMATE)

Swing circuit . . . . . . . . . . . . . . . . . . . . . . . . . 24.7 MPa 252 kg/cm2 Operating weight including 4600 mm one-piece boom, 2500 mm
Pilot circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kg/cm2 arm, ISO 7451 heaped 0.50 m3 backhoe bucket, rated capacity of
Hydraulic cylinders: lubricants, coolant, full fuel tank, operator, and standard equipment.
(Number of cylinders – bore x stroke x rod diameter)
Boom . . . . . . . . . . . . . . . . . . . . . . . 2–105 mm x 995 mm x 70 mm Shoes Operating Weight Ground Pressure
Arm . . . . . . . . . . . . . . . . . . . . . . . . 1–115 mm x 1175 mm x 75 mm
Bucket: . . . . . . . . . . . . . . . . . . . . . . . 1–95 mm x 885 mm x 65 mm 500 mm 12380 kg 38.6 kPa 0.39 kg/cm2

600 mm 12560 kg 32.6 kPa 0.33 kg/cm2

700 mm 12740 kg 28.4 kPa 0.29 kg/cm2

DRIVES AND BRAKES

Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals

Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull . . . . . . . . . . . . . . . . . . . . 122.6 kN 12500 kg
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35°
Maximum travel speed: High . . . . . . . . . . . . . . . . . . . . . . . .5.5 km/h
Low . . . . . . . . . . . . . . . . . . . . . . . . .2.9 km/h
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake

16
 HYDR AULIC EXCAVATOR PC130-8

DIMENSIONS

Arm Length 2500 mm 3000 mm

A Overall length 7590 mm 7485 mm
B Length on ground (Transport) 4410 mm 4280 mm
C Overall height (To top of boom) 2875 mm 3185 mm
D Overall width 2500 mm
E Overall height (To top of cab) 2855 mm
F Ground clearance, counterweight 895 mm
G Ground clearance (Minimum) 400 mm
H Tail swing radius 2190 mm
I Track length on ground 2880 mm
J Track length 3610 mm
K Track gauge 1990 mm
L Width of crawler 2490 mm
M Shoe width 500 mm
N Grouser height 20 mm
O Machine cab height 1925 mm
P Machine cab width 2500 mm
Q Distance, swing center to rear end 2110 mm
A
D,P H,Q

E C
O
F
G.L
G M N
I
K J
L B

WORKING RANGE

H Arm Length 2500 mm 3000 mm

(m) A Max. digging height 8650 mm 8930 mm
9
B Max. dumping height 6210 mm 6615 mm
8
C Max. digging depth 5520 mm 5955 mm
7 D Max. vertical wall digging depth 4980 mm 5365 mm
6 E Max. digging depth of cut for 2440 mm level 5320 mm 5775 mm
F Max. digging reach 8290 mm 8720 mm
5
A G Max. digging reach at ground level 8170 mm 8595 mm
4
H Min. swing radius 2450 mm 2620 mm
B 3 80.9 kN 80.9 kN
SAE 1179

Bucket digging force at power max.

Rating

2
8250 kg 8250 kg
64.5 kN 56.8 kN
1 Arm crowd force at power max.
6580 kg 5800 kg
0 G.L
(m) 9 8 7 6 5 4 3 2 1 0
93.4 kN 93.4 kN
ISO 6015

Bucket digging force at power max.

Rating

9520 kg 9520 kg
-1
67.5 kN 59.3 kN
Arm crowd force at power max.
-2 6880 kg 6050 kg
E D
C -3

-4

-5

-6
2.44
G
F

17
 LIFTING CAPACITY WITH LIFTING MODE

A PC130-8
A: Reach from swing center
B: Bucket hook height
C: Lifting capacity
Cf: Rating over front
B Cs: Rating over side
: Rating at maximum reach
C

PC130-8 Boom: 4600 mm Arm: 2500 mm Bucket: 0.50 m3 ISO 7451 heaped Shoe: 500 mm triple grouser

A MAX 7.6 m 6.1 m 4.6 m 3.0 m 1.5 m

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.6 m

6.1 m *1950 kg *1950 kg

4.6 m *1800 kg 1650 kg 2850 kg 1950 kg *3100 kg *3100 kg

3.0 m *1800 kg 1400 kg 2750 kg 1900 kg *3900 kg 3100 kg *5000 kg *5000 kg

1.5 m 1950 kg 1300 kg 2700 kg 1800 kg 4300 kg 2900 kg *7700 kg 5500 kg

Om 1950 kg 1300 kg 2600 kg 1700 kg 4100 kg 2700 kg 8350 kg 5100 kg

–1.5 m 2200 kg 1450 kg 2550 kg 1700 kg 3900 kg 2500 kg 8200 kg 5000 kg *4750 kg *4750 kg

–3.0 m 2800 kg 1850 kg 4050 kg 2650 kg *7850 kg 5050 kg *8000 kg *8000 kg

PC130-8 Boom: 4600 mm Arm: 3000 mm Bucket: 0.50 m3 ISO 7451 heaped Shoe: 500 mm triple grouser

A MAX 7.6 m 6.1 m 4.6 m 3.0 m 1.5 m

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.6 m *1850 kg *1850 kg *2050 kg *2050 kg

6.1 m *1500 kg *1500 kg *1850 kg *1850 kg

4.6 m *1400 kg 1400 kg *2700 kg 1950 kg

3.0 m *1400 kg 1200 kg *1550 kg 1200 kg 2750 kg 1900 kg *3400 kg 3150 kg

1.5 m *1500 kg 1100 kg 1800 kg 1150 kg 2650 kg 1800 kg 4350 kg 2900 kg *6650 kg 5500 kg

Om 1700 kg 1100 kg 1750 kg 1100 kg 2550 kg 1700 kg 4100 kg 2700 kg 8350 kg 5050 kg

–1.5 m 1900 kg 1200 kg 2500 kg 1600 kg 3850 kg 2450 kg 8100 kg 4850 kg *4150 kg *4150 kg

–3.0 m 2300 kg 1500 kg 2500 kg 1600 kg 3900 kg 2550 kg 8100 kg 4850 kg *6750 kg *6750 kg

–4.6 m *3350 kg 2350 kg *3950 kg 2650 kg *6250 kg 5050 kg

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

18
 HYDR AULIC EXCAVATOR PC130-8

STANDARD EQUIPMENT
ENGINE: GUARDS AND COVERS: OTHER EQUIPMENT:
• Automatic engine warm-up system • Fan guard structure • Counterweight
• Dry type air cleaner, double element • Electric horn
• Engine, Komatsu SAA4D95LE-5 UNDERCARRIAGE: • Rear reflector
• Engine overheat prevention system • Hydraulic track adjusters (Each side) • Seat belt, retractable
• Radiator and oil cooler dust proof net • Track roller • Slip-resistant plates
• Suction fan —7 each side • Travel alarm
• Track shoe
ELECTRICAL SYSTEM: —500 mm triple grouser
• Alternator, 24 V/35 A
• Auto-decelerator OPERATOR ENVIRONMENT:
• Batteries, 2 X 12 V/64 Ah • A/C with defroster
• Starting motor, 24 V/4.5 kW • Equipment Management Monitoring
• Working light, 2 (Boom and RH) System
• Front underview mirror
HYDRAULIC SYSTEM: • Large multi-lingual high resolution LCD
• Boom holding valve monitor
• Power maximizing system • Rear view mirrors (RH, LH, rear, sidewise)
• Pressure Proportional Control (PPC) • ROPS cab (ISO 12117-2)
hydraulic control system
• Working mode selection system

OPTIONAL EQUIPMENT

ENGINE: UNDERCARRIAGE: • Cab front guard

• Additional filter system for poor-quality • Shoes, triple grouser —Full height guard level 1 (ISO 10262)
fuel (Water separator) —600 mm —Half height guard
—700 mm • Rear view monitor system
ELECTRICAL SYSTEM: • Track frame undercover • Seat, suspension
• Alternator, 24 V/60 A • Track roller guards (Center section)
• Batteries, large capacity WORK EQUIPMENT:
• Working lights OPERATOR ENVIRONMENT: • Arms
—2 on cab • Bolt-on top guard, OPG top guard level 2 —2500 mm arm assembly
—1 on counterweight (ISO 10262) —3000 mm arm assembly
• Cab accessories • Boom
HYDRAULIC SYSTEM: —Rain visor —4600 mm
• Long lubricating intervals for work —Sun visor
equipment bushing (500 hours)
• Service valve

19
https://home.komatsu/en/ Printed in Japan 201801 IP.As

CEN00292-06 Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.