Steel Wheel Roller

BW5AS

KEY FEATURES
• Rugged, high-strength frame • Hydrostatic drive
• Corrosion-free water spray system • No daily lubrication
• Vandal protection • Ergonomically engineered operator’s
compartment
BW5AS

ROPS/FOPS and seat belts

Vandal-protected control panel,

Ergonomically engineered
engine, hydraulic oil and filter
operator’s compartment

Two, spring-loaded
scrapers on each drum

Non-corrosive water spray system

features PVC spray bars and quick-
disconnect spray nozzles

Precision machined drums for

better compaction performance
Rugged, high-strength and improved surface finish
steel frame Full hydrostatic drive for smooth,
effortless acceleration, deceleration
and direction changes

■ Used for all phases of compaction, especially finish rolling...

The dual center-facing seats of the BW5AS ■ Applications:

position the operator for visibility, control
and comfort. The operator has full view of
• Highway construction
the exposed drums and the side of the
roller. For greater versatility and easy
• Commercial and residential paving
transportation, the BW5AS is available in a
4-6 ton model equipped with tow package. • Driveways
The design includes a 12-volt electric
socket with rear lights, positive wheel lock, • Parking lots
guide roll yoke locks, tongue lock and
safety chains. Mounted on the frame • Asphalt resurfacing
within easy reach, the hydraulic control
valve lowers the towing wheels while rais- Especially designed for all types of asphalt compaction
ing the roller to a travel position providing
7 inches of road clearance under the
drums.
 Featuring…
■ Handling is Easier & Safer:
• Simple ergonomic layout of controls
makes operation easy.
• Brake(s) apply automatically when engine
is shut down or with a loss of transmis-
sion hydraulic pressure.
• The water tank, fuel tank and engine are
placed down inside the frame keeping a
low center of gravity.
• The dual center-facing seats provide the
operator excellent visibility of the drum
and water spray system during travel in
Controls are placed for natural operator movements either direction.
• Falling-Object/Roll-Over Protective The full hydrostatic drive with a low-speed, high-torque motor
Structure (FOPS/ROPS) and seat belts are delivers smooth acceleration, deceleration and directional
standard features. changes.
• The transverse engine mounting keeps
the operator comfortable by directing air,
noise and exhaust 90˚ away.

These steel wheel rollers offer ease of

operation and low maintenance
Each drum has a full width cocoa mat, two scrapper bars that
clean in both travel directions, and four spray nozzles

■ Achieve Maximum Productivity: ■ Less Service & Maintenance:

• Hydrostatic drive allows smooth, effortless The purchase price is important, but so are
acceleration, deceleration and directional the operating costs. Check these features:
changes.
• The frame overhang is minimal and all
• Radial piston design transmission provides drive components are inside the frame.
excellent gradeability, as well as top pro-
duction at high travel speed. • There are no “grease daily” fittings.

• Hydrostatic steering with automotive type • High efficiency, 7-micron filter helps pro-
steering wheel provides the operator with long hydraulic component life. Indicator
controlled maneuverability. light on console immediately alerts the
operator when the filter requires service.
• Cummins A2300 diesel engine provides
ample reserve power for even the most • Daily maintenance checkpoints and filters
demanding jobs. are easily reached.

• The precision machined drum(s) provide • Pressure test ports are centrally located,
smooth, compacted surface results. using standard capped fittings for quick The engine location is low in the frame for ease of service and
operator visibility
hassle-free servicing.
• Two-section steering drum minimizes scuff-
ing in sharp turns. • The non-corrosive water spray system
features PVC spray bars and quick-
• Dual scrapers and full width cocoa mats on disconnect spray nozzles. With these features and many more, it’s
each drum minimize asphalt pick-up.
easy to see why this model maintains a
• Center opening hood offers excellent
• Hydrodynamic braking of hydrostatic drive engine area accessibility. high residual value while delivering lower
system provides smooth, controlled, posi-
tive stops.
lifetime operating costs.
 Technical Specifications
BW5AS
H2

K
Standard equipment (3-5 ton)
✓ Cummins A2300 Diesel Engine W
D D2

✓ Pressurized Water Spray System

B A
B2 L

✓ Horn
L2

✓ Front and Rear Drum Scrapers Dimensions

✓ Cocoa mats in inches (mm)
BW 5 AS
A
108
B
52
B2
84
D
48
D2
34
H
63
H2
97
K
15
L
159
L2
206
W
F 40/R 42
✓ Vandal Guards (2743) (1321) (2134) (1218) (864) (1600) (2464) (381) (4039) (5232) F (1016)/R (1067)

✓ ROPS/FOPS and Seat belts Technical data BOMAG

BW 5 AS
Weights
Optional equipment (3-5 ton) Operating weight 3-5 ton.............................................. lb (kg) 9380 (4255)
Operating weight w/ full ballast 3-5 ton........................ lb (kg) 12080 (5480)
Headlights (Front and Rear) Operating weight 4-6 ton.............................................. lb (kg) 10347 (4693)
Operating weight w/ full ballast 4-6 ton........................ lb (kg) 13047 (5918)
Turn Signals and 4-way Flashers Max. static linear load/drive drum 3-5 ton .................... lb/in (kg/cm) 171 (30.5)
Max. static linear load/guide drum 3-5 ton ................... lb/in (kg/cm) 122 (21.9)
Special Paint, 1 Color Max. static linear load/drive drum 4-6 ton .................... lb/in (kg/cm) 191 (34.1)
Max. static linear load/guide drum 4-6 ton ................... lb/in (kg/cm) 126 (22.5)
(Enamel Only) * Operating weight includes full fuel tank, half tank waterspray, FOPS/ROPS and 175 lb operator

Dimensions
Track radius, inner......................................................... in (mm) 112.5 (2858)
Standard equipment (4-6 ton) Height with FOPS/ROPS ............................................. in (mm) 97 (2464)
✓ Cummins A2300 Diesel Engine Driving Characteristics
✓ Pressurized Water Spray System Speed (1) ....................................................................... mph (km/h) 0-11 (0-17.7)

✓ Horn Drive
Engine manufacturer ..................................................... Cummins
✓ Front and Rear Drum Scrapers Type ..............................................................................
Cooling .........................................................................
A2300
water
✓ Cocoa mats Number of cylinders......................................................
Performance SAE, brake ................................................ hp (kW)
4
47 (35)
✓ Vandal Guards Speed............................................................................. rpm
Fuel ...............................................................................
(min-1) 2600
diesel
(2600)

✓ ROPS/FOPS and Seat Belts Electric equipment ........................................................ V

Drive system..................................................................
12
hydrostatic
✓ Towing Package Driven drum ................................................................. R

✓ Towing Lights Brakes

Service brake.................................................................. hydrostatic
✓ Towing Safety Chains Secondary/Parking brake ............................................... SAHR

Steering

2M509TTTBC
Steering system .............................................................. automotive-type
Optional equipment (4-6 ton) Steering method ............................................................ hydraulic
Steering angle +/-........................................................... degrees 39
Headlights (Front and Rear) Oscillating angle straight +/-.......................................... degrees 25
Oscillating angle full turn +/- ........................................ degrees 15
Turn Signals and 4-way Flashers Water Spray System
B101H-2462

Special Paint, 1 Color Type of spray system...................................................... pressurized

(Enamel Only) Capacities

Fuel ............................................................................... gal (l) 17 (64)
9:00 x 20 - 12 Ply Tires Water............................................................................. gal (l) 100 (379)
Hydraulic oil reservoir ................................................... gal (l) 15 (57)
Electric Brakes Coolant system.............................................................. gal (l) 4.75 (18)

Electric Brakes Control Kit Technical modifications reserved. Machines may be shown with options.

BOMAG Americas, Inc.

2000 Kentville Rd. • Kewanee, IL 61443
www.gobomag.com Tel: 309 853-3571 • Fax: 309 852-0350