PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BR-3” DOUBLE-GRIP MODEL “BR-3” DO UBLE-GRIP

RETRIEVABLE CASING PACKER PACKER OPERATION
Product No. BI 642-01

The “BR-3 Double-Grip” is a truly versatile

set-down type Packer. Proven by its world-wide
use, it performs reliably in production, stimulation
and testing operations.

FEATURES/BENEFITS

• Hydraulic button-type hold down located

below the by-pass valve.

• Unique, built-in, “differential lock” helps

keep the by-pass valve closed.

• E ff e c t i v e b y - p a s s d e s i g n s p e e d s
equalization and resists swab-off.

• Field-proven, three-element packing

system and rocker-type slips.

TO SET THE PACKER : The “BR-3” is set by

picking up, rotating to the right and then slacking
off on the tubing. Set-down weight closes and
seals the by-pass valve, sets the slips and packs-
off the Packing Elements.

TO RELEASE THE PACKER : Picking up the

tubing releases the Packer (no rotation required).
When the tubing is raised, the by-pass valve
opens to permit circulation through and around
the Packer

When the tubing string is raised the full length

of the Packer, the J-pins (on the bottom sub) are
oriented for automatic re-engagement. By then
lowering the tubing slightly, the J-pin engages the
J-slot thus assuring complete release and
preventing accidental resetting while retrieving
the Packer.

Model “BR-3” Running In Producing

Double-Grip
Packer

ORDERING EXAMPLE :
PRODUCT NO. BI 642-01
SIZE : BI 47B4 (7” OD 20-26 Ib/ft casing) MODEL “BR-3”
DOUBLE-GRIP RETRIEVABLE CASING PACKER
w/2-7/8” OD EU RD Box x Pin, for 6.5 Ib/ft tubing

60
 PRODUCTION AND TEST PACKER RETRIEVABLE

SPECIFICATION GUIDE
Model “BR-3” Double-Grip & Single Grip Retrievable Casing Packer
Product No. BI 642-01, BI 641-01
Casing Packer
ID range in which Gage &
Nom Thread specification (B)
OD Weight (A) Packer may be run Guide
Size (B) ID Box Up & Pin Down
Ring OD
Min Max
In mm Ib/ft In mm In mm In mm In mm In mm
4-1/2 3.910 4.090 3,771
9.5-13.5 103.9 Bl43A
114,30 99.31 95,78

4.250 4,408 4,125

15-18 112,0 Bl43B 1.89 104,78 2-3/8 OD EU 8 RD
5 107,9
48.01 60.33
127,00
11.5-15 4.408 4,560
BI43C 4,250
112,0 115,8 107,95
26

1.96 4.500
BI 45A2
4.625 4.777 49,78 2-7/8OD EU8RD
20-23
5-1/2 117,5 121,3 2.38 73,02
139,70 BI 45A2X2-3/8 114,30
60,45
15.5-20 4.778 4.950 1.96 2-3/8OD EU 8 RD
BI45A4
14-20 121,4 125,7 49,78 4.641 60,33
4.778 4.892 2.38 117,88 2-7/8OD EU 8 RD
17-20 124,25 BI 45A4X2-3/8
121,4 60,45 73,02
4.950 5.190 1.96 2-3/8OD EU 8 RD
BI 45B
13-15.5 125,7 131,8 49,78 60,33
4.893 5.044 2.38 2-7/8OD EU 8 RD
5-3/4 BI 45BX2-3/8
124,3 128,1 60,45 4.781 73,02
146,05 4.950 5.190 1.96 121,44 2-3/8OD EU 8 RD
BI 45B
125,7 131,8 49,78 60,33
22.5
4.893 5.044 2.38 2-7/8OD EU 8 RD
BI 45BX2-3/8
124 3 128 1 60 45 73 02
5.5 61 5.609 5.405
34 BI 45E2
141,2 142,5 1.96 137,31 2-3/8 OD EU 8 RD
49,78 60,33
5.6 10 5.484
5.791 BI 45E4
142, 5 139, 29
28-32
5.6 00 2.41 5.475 2-7/8 OD EU 8 RD
147, 1 BI 46A2 61,21
142, 2 139, 07 73,02
1.96 5.484 2-3/8 OD EU 8 RD
BI 45EF 49,78 139,29
5.791 5.921 60,33
24-28
147,1 150,4 5.588
6-5/8 BI 46A4
168, 28 141,94

24 5.830 5.937 2.41 5.656 2-7/8 OD EU 8 RD

BI 47A2
148,1 150,8 61,21 143,66 73,02
5.938 6.135 5.812
17-20 BI 47A4
150,8 155,8 147,62
5.791 5.921 5.588
BI 46A4
147,1 150,4 141,94
38
5.830 5.937 5.656
BI 47A2 2-7/8OD EU 8 RD
148,1 150,8 2.41 143,66
5.922 61,21 5.781 73,02
150,4 6.135 BI 46B 146,84
5.938 155,8 BI 47A4
32-35
150,8 5.812
5.989 6.094 147,62 3-1/2OD EU 8 RD
-
7 152,1 154,8 88,90
177,80
6.136 6.276 2.41 5,968 2-7/8OD EU 8 RD
26-29 BI 47B2
155,8 159,4 61,21 151,59 73,02

6.276 6.456 2.41 6.078 2-7/8 OD EU 8 RD

20-26 BI 47B4
159,4 164,0 61,21 154,38 73,02

6.456 6.578 2.41 6.266 2-7/8OD EU 8 RD

17-20 BI 47C2
164,0 167,1 61,21 159,16 73,02

61
 PRODUCTION AND TEST PACKER RETRIEVABLE

SPECIFICATION GUIDE
Model "BR-3" Double-Grip & Single-Grip Casing Packer
Product No. BI 642-01, BI 641-01
Casing Packer
ID Range in Which
Gage &
Packer May Be Run Nom Thread Specification
O. D. Weight Guide
Min Max.
Size ID Ring OD Box Up & Pin Down

In. In. In. In. In. In.

mm Lb/ft mm mm mm mm mm
6.797 BI 47C4 2.41 2-7/8 OD EU 8 RD
6.579 172, 6 61,21 6.453
73,02
33.7-39
167,1 6.765 BI 47C4 X 3 3.00 3-1/2 OD EU 8 RD
163,91
171, 83 76,20 88,90
6.788 7.025 2.41 2-7/8 OD EU 8 RD
BI 47D2 6.672
172,7 61,21 73,02
7-5/8 24-29.7
193,68 6.766 3.00 3-1/2 OD EU 8 RD
178,4 BI 47D2 X 3 169,47
171,9 76,20 88,90
2.41 2-7/8 OD EU 8 RD
7.025 7.125 BI 47D4 6.812
20-24 61,21 73,02
178,4 181,0
BI 47D4 X 3 3.00 3-1/2 OD EU 8 RD
173,02
76,20 88,90
7.511 7.687 BI 49A2 7.312
44-49 190,8 195,2 185,72
8-5/8 7.688 7.921 3.00 7.531 3-1/2 OD EU 8 RD
32-40 BI 49A4
219,08 195,3 201,2 76,20 191, 29 88,90
7.922 8.191 7.781
20-28 BI 49B2
201,2 208,1 197,64
8.343 8.681 8.218
47-53.5 BI 51A2
211,9 220,5 208,74
9-5/8 3-1/2OD EU 8 RD
8.681 8.835 3.96 8.437
244,48 40-47 BI 51A4 88,90
220,5 224,4 100,58 214,30

29.3-36 8.836 9.063 8.593

(A) When selecting a Packer for a casing weight common to two weight ranges (same OD, choose the Packer size shown for the lighter of the two weight ranges.
Example : For 7” 20 Ib/ft. Casing use Packer size 47C2. Under certain circumstances the other Packer size may be run, such as when running in mixed Casing Strings.

(B) Threads shown below are “standard” for the respective Packer sizes. Other threads are available on request. Please specify threads when ordering.
Repair Kits, including such items as packing elements, seal rings, etc. are available for redressing Retrievable Packers.

62
 PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
 Temperature tested with multiple
BOTIL MODEL “BM” MECHANICAL Pressure reversals
SET PACKER  Tension loads compatible with
Product No. BI 643-01 tubing string @ 10,000 psi
 Staged upper slip release with solid
DESCRIPTION & APPLICATION upper cone
The BOTIL Model “BM” is mechanical set  Full tubing ID Packer bore
retrievable high performance production
Packer. It is designed to meet the demands
of high pressure fracturing procedures, as
well as production applications. The Packer
is set in compression, allowing final
positioning in compression, tension or
neutral.

FEATURES/BENEFITS

 Ease of setting and release, one

fourth turn right-hand rotation to set,
one – forth right-hand rotation to
release
 Superior sealing system with three
element stack
 Independent lower and upper Jay
Assemblies contributing to short,
compact design
 No O-ring required
 Built in un loader with bonded deal
for bypass
 Bypass opens before release of
upper slips for safety and ease of
release
 Rated to 10,000 psi @ 350°F
 Fully tested in minimum to maximum
API tolerances for each specified
casing weight
SPECIFICATION GUIDE
Casing Packer Casing
OD Weight Packer Gage Packer Min ID Max ID
Range Size Ring OD I.D.
In. mm (lb/ft) In. In. In. In.
20-23 45A2 4.500 4.578 4.868
5-1/2” 139.7 17-20 45A4 4.600 4.696 4.976
15.5-17 45B 4.720 4.819 5.031
26-29 47B2 6.174 2.375 6.174 6.381
7” 177.8 23-26 47B4 6.256 6.266 6.466
20-23 47B 6.239 6.239 6.570

62.I
 PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
 Holds pressure from above or
BOTIL MODEL “BTCN” MECHANICAL below
SET PACKER  Right hand set, right hand
Product No. BI 643-02 release
 jay setting and releasing
DESCRIPTION & APPLICATION mechanism
 internal by-pass
The Botil Model “BTCN” Retrievable
 internal pressure unloader seal
Production Packer meets several
is located below the upper
zone isolation, production, and
slips; this allows debris to be
injection requirements. Full opening
flushed away from hold-down
design gives unrestricted flow and
slips before releasing
allows Wireline tools to pass.
Mechanical lock-setting action holds
substantial pressure from above or
below without tubing weight or
tension. No hydraulic anchor is
required to prevent packer movement,
even with differential pressures.
Packer’s ability to absorb tubing
expansion or contraction forces
makes the “BTCN” right for both
pumping and injection wells. The large
internal bypass reduces swabbing
effect when running-in or retrieving.
When packer is set, by pass is
automatically sealed. The “BTCN”
also features of upper slip releasing
system that reduces the strain
required to release the slips by
dislocating a key non-directional slip
first which automatically releases the
other slips. this mechanical feature
replaces the hold down system found
in other tools making it independent of
pressure variations.

FEATURE & BENEFITS:

 Tension set for shallow

applications
 Three assemblies are
available; small bore, large
bore and high pressure
 Can leave the tubing in a
tension, compression or neutral
condition

62.II
 PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
SPECIFICATION GUIDE
CASING ID THREAD
CASING MAX
RANGE PACKE CONNECTIO
OD PACKER
WEIGHT MIN MA R N
OF SIZE
SIZE (LBS/FT) (IN) X BORE BOX UP/
TOOL
(IN) PIN DOWN
20-23 4.629 4.852 4.500 450-200
2.000 2 3/8 EU 8 RD
14-17 4.851 5.075 462-200
5 1/2 4.625
15.5-17 4.851 5.016 462-237
2.375 2 7/8 EU 8 RD
20-23 4.629 4.852 4.500 450-237
29-35 5.952 6.237 5.812 581-250
26-32 6.042 6.342 5.875 2.500 2 7/8 EU 8 RD 587-250
7 17-26 6.224 6.611 6.000 600-250
26-32 6.042 6.361 5.875 587-300
3.000 3 1/2 EU 8 RD
17-26 6.224 6.611 6.000 600-300
43.5-53.5 8.463 8.866 8.250 825-400
9 5/8 4.000 4 1/2 EU 8 RD
32.3-43.5 8.683 9.101 8.500 850-400

62.III
 PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
 Right hand set, right hand
BOTIL MODEL “BTCN-1” release
MECHANICAL SET PACKER  jay setting and releasing
Product No. BI 643-03 mechanism
 internal by-pass
DESCRIPTION & APPLICATION  internal pressure unloader seal
is located below the upper
The Botil Model “BTCN-1” Retrievable slips; this allows debris to be
Production Packer meets several flushed away from hold-down
zone isolation, production, and slips before releasing
injection requirements. Full opening
design gives unrestricted flow and
allows Wireline tools to pass.
Mechanical lock-setting action holds
substantial pressure from above or
below without tubing weight or
tension. No hydraulic anchor is
required to prevent packer movement,
even with differential pressures.
Packer’s ability to absorb tubing
expansion or contraction forces
makes the “BTCN-1” right for both
pumping and injection wells. The large
internal bypass reduces swabbing
effect when running-in or retrieving.
When packer is set, by pass is
automatically sealed. The “BTCN-1”
also features of upper slip releasing
system that reduces the strain
required to release the slips by
dislocating a key non-directional slip
first which automatically releases the
other slips. this mechanical feature
replaces the hold down system found
in other tools making it independent of
pressure variations.

FEATURE & BENEFITS:

 Tension set for shallow

applications
 Three assemblies are
available; small bore, large
bore and high pressure
 Can leave the tubing in a
tension, compression or neutral
condition
 Holds pressure from above or
below

62.IV
 PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________

SPECIFICATION GUIDE

CASING ID THREAD
CASING MAX
RANGE PACKE CONNECTIO
OD PACKER
WEIGHT MIN MA R N
OF SIZE
SIZE (LBS/FT) (IN) X BORE BOX UP/
TOOL
(IN) PIN DOWN
20-23 4.629 4.852 4.500 450-200
2.000 2 3/8 EU 8 RD
14-17 4.851 5.075 462-200
5 1/2 4.625
15.5-17 4.851 5.016 462-237
2.375 2 7/8 EU 8 RD
20-23 4.629 4.852 4.500 450-237
29-35 5.952 6.237 5.812 581-250
26-32 6.042 6.342 5.875 2.500 2 7/8 EU 8 RD 587-250
7 17-26 6.224 6.611 6.000 600-250
26-32 6.042 6.361 5.875 587-300
3.000 3 1/2 EU 8 RD
17-26 6.224 6.611 6.000 600-300
43.5-53.5 8.463 8.866 8.250 825-400
9 5/8 4.000 4 1/2 EU 8 RD
32.3-43.5 8.683 9.101 8.500 850-400

62.V
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL”BRHD” RETRIEVABLE HYDRAULIC LARGE SLIP AREA A large Slip contact area prevents the casing
DUAL PACKER from being damaged when the Packer is set. The opposing Slips
Product No. BI 783-16 hold the Packer in both directions without the use of troublesome
Hold Down Buttons.
DESCRIPTION:
THREE PACKING ELEMENTS The “BRHD” Dual Packer has a
three element packing system consisting of hard rubber outer
Model “BRHD” Retrievable Hydraulic Dual elements for anti-extrusion and a soft rubber centre elements for
Packer with flat top and by-pass is one out of sealing. When the Packer is set, the pack-off force is mechanically
group of Packers for offshore annulus safety locked into the Packing Elements
systems. The “BRHD” Dual Packer pack-off
features a single by-pass passage and a control SAFETY LOCK The “BRHD” Dual Packer is mechanically
line passage which is used for setting the locked while running down hole to prevent premature setting.
Packer. It is a versatile Packer which provides
improved capabilities in the well. OPERATION :

APPLICATIONS : PRODUCTION TEST Before running, check the control line

passage by unscrewing the release sub-assembly from the Packer
Model “BRHD” Dual Packer is meant and replacing It with the “RHD” Test Plug. Test the control line to
specifically to be run with Valve. This System 5000 psi, hold the pressure for 5 minutes .and check for pressure
has full drift flow passages which are required drop. If the test is successful, grease seals of Release Sub
for chemical injection and gas lift operations. Assembly with down hole seal lubricant, unscrew “BRHD” Test
Plug and replace with release Sub Assembly.
FEATURES :
Hydraulic /Hydrostatic Set Model “BRHD” RUNNING AND SETTING The exterior parts of the “BRHD” Dual
Dual Packer is hydraulically set by control line Packer are mechanically locked to the fixed string, thus eliminating
pressure using a Wireline Retrievable Setting the possibility of premature setting while running down hole.
Dummy. Model “BRHD” Dual Packer uses
existing hydrostatic pressure in the well to BOTH FIXED AND FLOATING TUBING STRINGS CAN BE
reduce pressure applied to the control line to set TESTED WITHOUT MECHANICAL LOCK OR SETTING THE
the Packer. PACKER.

Check the shear plate for the proper Release Value and the
outside diameter of the Packer. The Packer is ready to run down
hole. After hanging the Tubing and installing the Wellhead, well
fluids can be replaced by the completion fluid (in the annulus) and a
TESTING The control line passage within the Model “BRHD” light fluid (gas oil) in the tubing. The displacement rate should not
Dual Packer can be tested before running or setting the Packer. exceed 2bbl per min. to keep the Packing Elements from sealing
Also, both Tubing Strings can be tested once the Packer is in the during circulation.
well without setting the Packer.
SETTING BY CONTROL LINE The “BRHD “ Dual Packer is set by
EASE OF MAKE-UP Both strings are free to rotate for easy tubing pressuring the control line to 1400 psi which hydraulically releases
string make-up without the use of Swivel Subs and allow the the premature setting lock and allows the Packer to start setting.
unlatching production equipment below. Further pressuring and maximum applied pressure = 10000 psi
cause the Slips to grip firmly in the casing, expanding the Packing
FLOATING JOINT The floating string is free to reciprocate (24”) .
Elements to exert sufficient pack-off force to ensure a effective
This feature facilitates spacing out to the Dual Tubing and Annular
seal, and allowing the lock ring to mechanically lock the Packing
Safety System above the Packer. Also, one Tubing String is not
Elements and Slips in place.
required to support the load of both strings when running the
completion. RETRIEVING The “BRHD” Dual Packer is retrieved by a straight
pull on the fixed string. The sequence of releasing the Packing and
NON-ROTATIONAL RELEASE Model “BRHD” Dual Packer is
Slips is as follows: Pulling the fixed string shears the Shear Plate
retrieved by straight pull on the fixed string. The force required to
and allows the fixed string to move up. The fixed string shoulders
release the Packer can be set prior to running by retaining, or
on the retaining plate and further movement up shears its Shear
reducing the area of the shear plate without dismantling the Packer.
Screws and releases the collets from the Pack-off Mandrels. The
Non-rotational release eliminates problems with the control line and
fixed string is then pulled further up and releases the Packings and
is an advantage in greater well depths or in the case of well
Slips from the casing I.D. The Packer is then free and can be
deviation.
retrieved.
5000 PSI RATING The “BRHD” Dual Packer is rated for 5000 psi
differential from above or below and is designed for H2S service. All
tubing wetted parts meet NACE MR-01-75 standards.

63
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BA-2” LOCK-SET RETRIEVABLE CASING Safe, Right-Hand Rotation :

PACKER
Product No. Bl 646-12 The Lock-Set Packer features a remarkable
design that permits right hand control of both
setting and releasing, and also locks in
FEATURES :
compression of the packing element.
Lock Set Packer is a retrievable packer with no-movement
performance that is ideal for many production, injection and zone The Packer incorporates a releasable Lock
isolation operations. ring that provides a no-return, ratchet take up for
holding compression of Packing Elements after
FEATURES : pack-off. This ratchet lock can release only by
right-hand rotation of the mandrel. The Lock-Set
Hold From Above and Below : ratchet action is accomplished with left and right
multiple threads on the Mandrel, in conjunction
The Lock Set Packer is mechanically locked for no movement with the segmented releasable lock ring. The lock
after it is set and packed off. It will hold pressure from above and ring contains two segments with matching left
below without requiring setdown weight, tubing tension, or the use hand threads and two segments with matching
of hydraulic hold downs to maintain its packoff. right hand thread. Depending on the thread
involved the arrangement permits ratchet
In Pumping wells, the Lock-Set may be used to isolate bad movement of the Mandrel relative to the lock ring,
casing and, by applying tension, it can also serve as a Tubing in one direction only. Movement in the opposite
Anchor. By contrast, in water-flood wells, where seasonal direction is possible only by rotating to the right.
temperature changes in injection water can create problems for
conventional Packers, Lock-Set permits the Tubing to be installed in The Lock-Set threads have ratchet take ups
neutral. This eliminates the possibility of unpacking the Packer due of 1/8 in. since the success of the pack-off is
to elongation of the Tubing, and the possibility of parted strings due largely determined by the fineness of the take up,
to contraction. this small increment is important to assure a
perfect pack-off.

LOK-SET RETRIEVABLE CASING PACKER SPECIFICATION

Casin g Preferred Range Drag Block

of Csg. ID’s Gage Packin g Packin g Absolute Limits Thread
Packer Packer Min .
Ring Ele ment Ele ment of Slip Travel Spec.
Siz e ID OD Spacer Comp. Box Up &
T & C Wt OD
OD Min. Max. OD Heig ht Pin down
(Ib) Min. Max.

11.6-13.5 BI43A2 3.9 10 4.0 00 3.7 71 3.6 25 3.7 71 3.6 87 4.2 07 3.7 50 2-3/8 OD
4-1/2
9.5-10.5 BI43A4 4.0 01 4.0 90 - 3.9 38 EU 8 Rd &
15-18 BI43B 4.2 50 4.4 08 4.1 25 3.9 38 4.1 25 2-3/8 OD
5
11.5-15 4.0 62 4.5 82 4.1 25 NU 10 Rd
BI43C 4.4 08 4.5 60 4.2 50 4.1 56 4.2 50
26
20-23 BI45A2 4.6 25 4.7 78 4.5 00
5-1/2 4.3 75 4.5 00 4.5 00
15.5-20 BI45A4 4.7 78 4.9 50 4.6 41
4.4 37 5.2 21
13-15.5 4.6 88 4.7 81 4.6 88
BI45B 4.9 50 5.1 90 4.7 81
26
6 20-23 5.1 91 5.0 62 1.97 2-3/8 OD
BI45C 5.3 90 4.9 38 5.0 62 5.0 00 5.7 84 5.0 00 EU 8 RD
15-18 BI45D 5.3 91 5.5 60 5.1 56
34 BI45E 5.5 61 5.6 09 5.4 06
5.2 50 5.4 06
6.5/8 24-32 BI45F 5.6 10 5.9 21 5.4 84 5.4 37 6.2 21 5.4 68
17-24 BI45G 5.9 22 6.1 35 5.7 81 5.6 88 5.7 81
24
7 38 BI47A2 5.8 30 5.9 37 5.6 56 5.5 00
17-20 5.5 00 5.6 56
6.5/8 6.1 35 5.8 12 5.5 62 6.6 65
BI47A4 5.9 38
32-35
26-29 BI47B2 6.1 36 6.2 76 5.9 68 5.9 36 2-7/8OD
5.7 50 5.9 68
7 23-26 BI47B4 6.2 76 6.3 66 6.0 78 2.441 EU 8 RD
17-20 BI47C2 6.4 56 6.5 78 6.2 66
33.7-39 BI47C4 6.4 53 6.1 25 6.2 66
6.5 79 6.7 97 6.2 00 7.3 03 6.3 75
7-5/8 24-29.7 BI47D2 6.7 98 7.0 25 6.6 72
20-24 BI47D4 6.8 12 6.5 00 6.6 72
7.0 25 7.1 25
44-49 BI49A2 7.5 11 7.6 87 7.3 12
BI49A4 7.5 31 7.0 00 7.3 12 7.2 50 8.2 76 7.2 50
8-5/8 32-40 7.6 88 7.9 21
20-28 BI49B 7.9 22 8.1 91 7.7 81 7.5 00 7.7 81 4OD
3.5 7.7 50
47-53.5 BI51A2 8.3 43 8.6 81 8.2 18 NU 8 RD
40-47 BI51A4 8.4 37 7.9 38 8.2 18 8.1 25 9.2 83
9-5/8 8.6 81 8.8 35
29.3-36 BI51B 8.8 36 9.0 63 8.5 93 8.1 25
8.3 75 8.5 93

NOTE Repair Kits (including such items as packing elements. seal rings. etc) are available for redressing Retrievable Packers

64
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BFL” AND “BFR” ON-OFF SEALING

CONNECTORS • Molded seals allow multiple disconnects
Product No. BI 683-15 and BI 683-14 and reconnects, as well as washing over,
without seal damage.
The Models “BFL” and “BFR” On-Off Sealing Connector are • Right-hand or left-hand release j-slot.
Tubing Seal Receptacles which accommodate isolation of a lower
zone by means of a Wireline Blanking Plug and disconnection of • J-slot can be shear pinned for safety.
the Tubing from the Packer by right or left hand J-slot release. • Can be dressed to shear down or up.
Although designed for use with the Lock-Set Retrievable • Receptacle design permits washover
Casing Packer, Model “BFL” can be used with any Packer that will down to top of Packer.
stay set without applied tubing tension or weight.

When used with an Anchor Seal Assembly to land in a Retainer

Production Packer, an Extension Sub must be used to put the
Washover Shoe above the top of the Packer.
FEATURES/BENEFITS

On-Off Sealing Connector

Product No. BI 683-15

ON-OFF SEALING CONNECTOR, SPECIFICATION GUIDE

Size Washover Max BFC Pressure Rating Standard Thread Speces

Casing OD Tubing OD
(Washover Shoe OD Shoe OD Profile Bore Internal External (Box Up & Pin Down)
In. In. x Tubing Thread x In. In. Psi Psi In.
mm mm BFc Profile Bore) mm mm kg/cm2 kg/cm2 mm

4-1/2
114.3 2-3/8 & smaller 3.75
A
60.3 3-3/4 x 2-3/8 x
5 95.25
1.875 2-3/8 OD EU 8RD
127.0
47.62 60.3
5-1/2 2.33 A
4-1/2 x 2-3/8 x
139.7 60.3

6 4.50
152.4 114.30
A 2.312
2-7/8 & smaller 2-7/8 OD EU 8RD
4-1/2 x 2-7/8 x 58.72
6-5/8 73.0 73.0
168.3

7 2-3/8 B 5-1/2 x 2-3/8 x

A 1.875 6,000 8,000 2-3/8 OD EU 8RD
177.8 60.3 47.62 60.3
424 656
or 5.50
2-7/8 & smaller 5-1/2 x 2-7/8 x A 2.312 2-7/8 RD EU 8RD
73.0 139.70 58.72 73.0
7-5/8
193.7 3-1/2 & smaller 5-1/2 x 3-1/2 x A 2.812 3-1/2 OD EU 8RD
88.9 71.42 88.9
6.50
6-1/2 x 2-7/8 x A 165.10
2-7/8 & smaller 2.312 2-7/8 OD EU 8RD
73.0 7-1/4 x 2-7/8 x A 7.25 58.72 73.0
8-5/8 184.15
219.1 6.50
6-1/2 x 3-1/2 x A 165.10
3-1/2 & smaller 2.812 3-1/2 OD EU 8RD
88.9 7-1/4 x 3-1/2 x A 7.25 71.42 88.9
184.15

A Specify BFC Profile Bore based on “Max. BFC Profile Bore” data column.
B When using 2-3/8 in. (60.3mm) tubing with a Size 47 Lock-Set Packer, and
the On-Off Tool is to be coupled directly to the Packer body, a size 5-1/2 x 2-7/8 x (2.31 or smaller) must be used.

65
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BFH” HYDROSTATIC

SINGLE STRING PACKER
Product No. BI 781-08

The “BFH” can be run in single-packer

installations, as the lower packer in
multiple-string hook-ups using
hydrostatic or hydraulic duals, or in
tandem in single string selective zone or
multiple-zone production wells. In
addition to applications where displacing
and setting after the well is flanged up
are desirable, the hydrostatic single is
ideal for deviated or crooked holes
where conditions are not suitable for
mechanically set packers.

FEATURES/ BENEFITS:

• Flanged up completion. No tubing

manipulation required.
• Hydrostatic/hydraulic setting.
• Pack-offis mechanically locked in.
• Standard hydraulic hold downs.
• Simple up-strain shear-release or
optional rotational-release.
• Multiple packing element system.

OPERATION : The Model “BFH”

Hydrostatic Packer is actuated by
pressuring the Tubing, and this is
generally done in one of three ways:

Running Position Set Position Retrieving Position

Model “BFH” Hydrostatic Single String Packer Operation

Model “BFH”
Hydrostatic Single
String Packer

66
 PRODUCTION AND TEST PACKER RETRIEVABLE

1. Dropping a ball to seat in a Hydro-Trip Pressure Sub or The Body Lock Ring mechanically locks in the set so that a
shearout Ball Seat Sub (Prod. No. BI 799-27 or BI 469-21) drop in hydrostatic pressure can have no effect on the Packer.
located below the Packer. After the Packer is set, the tubing is opened by pressuring to force
the tripping ball through the Pressure Sub or Displacing Valve or by
2. Use of a Differential Displacing Valve provided operations will retrieving the BFC Plug.
not require pressuring the tubing before the displacing valve is
to be opened. TO SET PACKER WHERE HYDROSTATIC PRESSURE IS LESS
THAN 1,500 PSI
3. Landing a BFC Blanking Plug in a BFC Seating Nipple or
Sliding Sleeve below the Packer. In most cases, the Plug can The Packer is dressed with additional shear screws to
be run, the Packer set, and the Plug retrieved all in one trip. increase the actuating pressure to 2,000 psi; and the Hydro-Trip
Where more than one Model “BFH” Packer is to be run, only Pressure Sub or Shear-out Ball Seat Sub is dressed to require
one of these plugging devices needs to be used below the 3,500 psi differential to blow the ball through after the packer is
lower most Packer. This arrangement will result in set.
simultaneous setting of all the “BFH” Packers when the tubing
is pressured. If simultaneous setting is not desirable, shear USING A DIFFERENTIAL DISPLACING VALVE
values can be altered so the Packers will set in sequence, the
This valve offers distinct advantages where it is desirable to
bottom first and the top last.
displace the tubing after the well is flanged up and the tubing
TO SET PACKER WHERE HYDROSTATIC PRESSURE IS sealed off in a Packer below the “BFH”. The valve is opened and
GREATER THAN 1,500 PSI the tubing displaced, then one ball is dropped to set the Packer
and close the valve.
Run the Packer to setting depth, flange up the well and
displace the tubing. Using one of the methods mentioned above, TO RELEASE THE PACKER
Plug the Tubing and increase Tubing pressure to approximately
The standard Model “BFH” Packer is equipped with a 30,000
1,000 psi over annulus pressure at the Packer. The shear screws
Ib Shear Ring for a straight up-strain release. Other values of
will shear, exposing the setting mechanism to the hydrostatic
Shear Rings available are shown in the table below.
pressure in the well. This pressure completely sets and packs-off
the Packer. An alternate rotational-release is available on special order,
which permits the Packer to be released by taking an up-strain and
SHEAR RING rotating to the right. The rotational release has a 50,000 lb 40,000
AVAILABILITY GUIDE lb on Size 43 straight up-strain shear-out safety release.
SHEAR RATING
PACKER lbx1,000
SIZE
20 30 40 50
43 x x x
ORDERING EXAMPLE :
PRODUCT NO. BI 781-08
45 x x x x
SIZE : BI 47B2 (7” OD 26-29 lb/ft casing)
47 x x x x MODEL “BFH” DOUBLE-GRIP HYDROSTATIC SINGLE-STRING
49 x x x x PACKER w/40,000#
Shear Value, 2-7/8” OD EU 8 RD
51 x x x x Box x Pin, for 6.5 lb/ft tubing.

MODEL “BFHL” HYDROSTATIC SINGLE STRING

PACKER
Product No. BI 781-20

The Model “BFHL” Hydrostatic Packer is a large bore version of

the “BFH” Packer. Features, advantages, and operational
procedures are basically the same as those described for the
“BFH”.

67
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BFH” HYDROSTATIC SINGLE STRING PACKER

Prod No BI 781-08 Specification Guide
Casing Packer
ID range in which Gage Standard
OD Weight (A) Packer may be run Nom Ring Thread specification (B)
Min. Max. Size ID OD Box Up & Pin Down
In In In In In In
mm lb/ft mm mm mm mm mm
4-1/2 3.910 4.090 3.771
9.5-13.5 BI 43A
114.30 99.31 103.9 95.78
4.250 4.408 4.125
5 15-18 BI 43B
108,0 112,0 104.78
127,00
11.5-15
4.408 4.560 4.250
BI 43C 1.98
112,00 115,8 107,95 2-3/8 OD EU 8 RD
26
50,30 60,33
4.625 4.778 4.500
20-23 BI 45A2
5-1/2 117,50 121,40 114,30
139,70 14-20 4.778 4.950 4.641
BI 45A4
15.5-20 121,40 125,70 117,88
13-15.5 4.950 5.190 4.781
BI 45B
125,70 131,80 121,44
5.830 5.937 5.656
38 BI 47A2
148,10 150,80 143,66
5.938 6.135 2.42 5.812 2-7/8 OD EU 8 RD
32-35 BI 47A4
150,80 155,80 61,50 147,62 73,03
7 6.136 6.276 5.968
26-29 BI 47B2 or
177,80 155,90 159,40 or 151,59
6.276 6.456 6.078 2-3/8 OD EU 8 RD
20-26 BI 47B4 2.00
159,40 164,00 154,38 60,33
50,8
6.456 6.578 6.266
17-20 BI 47C2
164,00 167,10 159,16
3.0 3-1/2 O.D. EU 8 RD
8.343 8.681
47-53.5 BI 51A2 76,20 8.218 88,90
211,90 220,50
or 208,74 or
9-5/8 2.44 8.437 2-7/8OD EU 8 RD
8.681 8.835
244,48 40-47 BI 51A4 62,00 214,30 73,03
220,50 224,40
or or
8.836 9.063 2.00 8.593 2-3/8OD EU 8 RD
29.3-36 BI 51B
224,40 230,20 50,80 218,26 60,33
(A) When selecting a Packer for a Casing weight common to two weight ranges (same OD), choose the Packer size shown for the lighter of the two weight ranges.
(B) Threads shown below are “standards” for the respective Packer Mandrel sizes. Other threads are available on request. Please specify threads when ordering.
Repair kits, including such items as packing elements, seal rings, etc., are available for redressing BOTIL Retrievable Packers.

.
SPECIFICATION GUIDE FOR ‘BFHL’ PACKER PRODUCT NO. BI 781-20
Range of Casing
Casing I.Ds in which Packer NOM Gage &
I.D. Thread
may be run Packer size Guide Ring Specification
In O.D.
WT IN mm
O.D. MIN MAX
LBS T&C
6-5/8 24 5.830 5.921 BI 47 A2 5.656
7 38
6-5/8 20 BI 47 A4 5.812
7 32-35 5.989 6.094
6-5/8 17 BI 47 B2 5.968
7 26-29 6.135 6.276 3.00 3-1/2 O.D. EU.
7 20-26 76.20 8 RD.
6.276 6.456 BI 47 B4 6.078
7 17-20 6.456 6.578 BI 47 C2 6.266
7-5/8 33.7-39 6.579 6.765 BI 47 C4 6.453
7-5/8 24-29.7 6.766 7.025 BI 47 D2 6.672
7-5/8 20-24 7.025 7.125 BI 47 D4 6.812
9-5/8 47-53 8.343 8.681 BI 51 A2 8.218
9-5/8 40-47 8.681 8.835 BI 51 A4 3.958 8.437 4-1/2 O.D. EU.
9-5/8 29.3-36 8.836 9.063 BI 51 B 100.53 8.593 8 RD

68
 MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER

MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER

PRODUCT No. BI 646-90

DESCRIPTION:
Botil Model ‘BHRL’ is a hydraulically set, straight-pull, shear release
retrievable packer. It is used in vertical and deviated wellbore or in
application in which single or multiple packers are set after the wellhead
has been installed. A modular shell and body design for low to medium
pressure differentials allows configuration as a single-string production
packer. Its compact, modular design makes the BHRL an economical
choice for production applications.

The BHRL is installed with the completion tubing and is set by applying
pressure to the tubing. Retrieval of the BHRL is accomplished with a
straight upward pull on the tubing. Once the tension on the tubing string
exceeds the shear value of the release pins, the slips disengage the casing,
and the element relaxes. Set at the factory to a standard value, the packer-
shear release mechanism can be adjusted in the field just before
installation.

FEATURES:

• No Tubing Manipulation required while setting of the Packer. The Packer

can be set after the well is flanged up and the tubing is displaced.
• Opposed Double grip slips (Bi-Directional) prevent movement of the
Packer in either direction due to pressure differentials.
• Large Flow Path ID.
• Straight pull shear release.
• Adjustable shear release.
• Field proven sealing element
• Minimized end effect on shear-release screws.
• Slips located below the Packing Elements.
• Double Piston design prevents tubing movement while setting.
• Double Lock ring sustain Pack-off and Slip grip mechanically after setting.

BENEFITS:

• Simplified operations reduce rig costs.

• Eliminates tubing movement during installation.
• Prevents debris build up above slips.
• Facilitates circulating out debris before retrieval.
• Positive casing grip secures packer.

68.I
 MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER

APPLICATIONS:

• Single string completion

• Zonal Isolation.
• Vertical, deviated or horizontal well bores.

SPECIFICATION GUIDE:

Casing Casing Max O.D Packer I.D* * Differential Min. tubing

Size Weight Rating(Psi) Setting
Pressure(psi)
7 23-26 6.090 2.426,2.992 7,000
7 26-29 6.000 2.426,2.992 7,000
7 29-32 5.910 2.426,2.992 7,000 3500
7 32-35 5.850 2.426,2.992 7,000
7 5/8 24-29.7 6.690 2.992 7,000
7 5/8 33.7-39 6.440 2.992 7,000 3000
9 5/8 40-47 8.463 2.992,3.910,4.733 7,000
9 5/8 47-53.5 8.354 2.929,3.910,4.733 7,000 3000

** I.D may vary depending on End connection selected.

68.II
 PRODUCTION AND TEST PACKER RETRIEVABLE

HYDRAULIC HOLD DOWN

Product No. BI 781-81 SPECIFICATION GUIDE
Casing Packer
I.D. Range in Which Standard
Packer May Be Run Nom. Guide Ring
O.D. Weight (A) Thread Specification (B)
I.D. O.D.
MIn Max Size Box Up & Pin Down
In. In. In. In. In. In.
lb/ft
mm mm mm mm. mm. mm.
4-½ 3.910 4.090 3.771
9.5-13.5 Bl 43A
114.30 99.31 103.9 95,78
5 4.250 4.408 4.125
15-18 Bl 43B
127,00 108.0 112.0 104,78
11.5-15 4.408 4.560 4.250
Bl 43C 2.441 107,95
26 112.00 115.8 2-7/8 OD EU 8 RD
20-23 4.625 4.778 62,00 4.500
Bl 45A2 73,03
117.50 121.40 114,30
5-½
14-20 4.778 4.950 4.641
139,70 Bl 45A4
15.5-20 121.40 125.70 117,88
4.950 5.190 4.781
13-15.5 Bl 45B
125.70 131.80 121,44
5.830 5.937 5.656
38 Bl 47A2
148.10 150.80 143,66
32-35 5.938 6.135 5.812
150.80 155.80 Bl 47A4
147,62
7 26-29 6.136 6.276 2.441 5.968 2-7/8 OD EU 8 RD
177.80 Bl 47B2
155.90 159.40 62,00 151,69
6.276 6.456 73,03
20-26 6.078
Bl 47B4
159.40 164.00 154,38
6.456 6.578 6.266
17-20 Bl 47C2
164.00 167.10 159,16

MODEL “BE” HYDRO-TRIP PRESSURE SUB

Product No. Bl 799-28 SPECIFICATION GUIDE
Size Standard
Ball Thd. Specs.
The Model “BE” Hydro-Trip Pressure Size Before After Box Up &
Sub is installed in the Tubing String below a Size Shifting Shifting Pin Down
Hydrostatic Packer to provide a method of In In In In
applying the tubing pressure required to mm mm mm mm
activate the Packer. 1-7/16 1.250 1.516 1.900 EU or NU
1.900
36.50 31.75 38.51 48.26
To set a Hydrostatic Packer, a ball is
circulated through the Tubing and Packer to 1-1/2 1.375 1.806
38.10 34.92 45.87 2-3/8 EU or NU
seat in the Hydro-Trip Pressure Sub and 2-3/8
1-3/4 1.625 1.906 60.33
sufficient Tubing pressure is applied to 44.45 41.28 48.41
activate the setting mechanism in the 2-7/8 2-1/8 2.000 2.375 2-7/8 EU or NU
53.98 50.80 60.33 73.03
Packer. After the Packer is set a pressure
2-1/2 2.312 2.781
increase to approximately 2500 psi shears 63.50 58.72 70.64 3-1/2 EU or NU
3-1/2
the brass shears screws and the ball seat 2-3/4 2.500 2.953 88.90
moves down until the finger snap back in to 69.85 63.50 75.01
3-1/16 2.734 3.615
a groove in top sub. The Hydro-Trip Sub is 77.79 69.44 91.82 4-1/2 EU or NU
then full opening and ball passes on down 4-1/2
3-3/8 2.958 3.865 114.30
the Tubing. 85.73 75.13 98.17

ORDERING EXAMPLE
PRODUCT No. Bl 799-28
SIZE 2-3/8” BOTIL MODEL “BE”
HYDRO-TRIP PRESSURE SUB
w/2-3/8” O.D. EU 8 RD BOX X PIN
f/J-55, 4.7 lbs/ft TUBING w/1-3/4” BALL

69
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL”BRTF” RETRIEVABLE TEST TREAT

FRACTURE PACKER
Product No:781-07

DESCRIPTION

The Model “BRTF” Retrievable Packer is designed for use in

testing, treating and squeezing operations. The tool is set by
applying right hand torque and setting down Tubing weight. This
action causes the mechanical slips to grip the wall of the casing.
These slips then support the Tubing weight required to compress
the Packing Elements and create a seal in the casing. The slips
also support, hydraulic forces in the annulus above the Packer - for
example, due to swabbing the Tubing.

Features:

l Retrievable Packer designed for testing, treating and

squeezing.

l Optional built in circulating valve may be opened and locked in

order to allow circulation above the Packer.

l Holds annulus pressure from above or below.

l Ideal for performing multiple operations on multiple zones

with only one run in the well.

l Large Mandrel ID allows pumping of large volumes of fluid with

minimum pressure drop.

l Large ID also allows passage of Tubing Perforating Guns.

SPECIFICATION GUIDE
Casing Packer
I.D. range in Thread
Weight which Packer Nom Specification
O.D O.D
may be run I.D Box Up x Pin Down
Size*
Min Max
In In In In
Lb/ft In In
mm mm mm mm
mm mm

4-1/2 3.910 4.090 1.96 3.875 2-3/8 O.D. I.F. T.J.

9.5-13.5 4-1/2”
114.3 99.31 103.9 49.78 98.425 60.33

* Other sizes on request. Single grip also available .

70
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BHP-2” HYDRAULIC SINGLE STRING MODEL “BHLP” HYDRAULIC RETRIEVABLE PACKER
RETRIEVABLE PACKER Product No. BI 782-08
Product No. BI 782-09
DESCRIPTION & APPLICATION : -
The “BHP-2” is a pure Hydraulic Set Packer
that can be run in single or multiple zone The Model “BHLP” Retrievable Packer is a
hydraulic set, large bore Double Grip Packer
installations. It is highly recommended for
used for production, zone isolation, multiple
deviated wells where conditions are not suitable string completions, commingling hook ups and
for Mechanical or Wireline set Packers for stimulation.
FEATURES / BEFEFITS The Setting starts on application of pump
pressure to the Tubing. the “BHLP” sets and
1 No Tubing movement is required for setting packs-off due to the force applied by tubing
the Packer. This allows the well to be kept pressures. The design of the setting mechanism
positively controlled at all times because the ensures sustained pack-off force throughout the
tubing is landed before circulating or displacing life of the Packer. Opposed Double Grip Slips
well fluids prior to setting the packer. Two or prevent movement of the Packer in either
direction due to pressure differentials, while
more packers can be set together or in any
allowing landing of the tubing in tension,
desired sequence. compression, or neutral.
2 The “BHP-2” Packer design features four The standard model BHLP Packer is equipped
bi-directional, single piece slips located below a with shear screws for a straight pick-up release.
three element packing system consisting of dual The Packer is suitable for maximum 5,000 psi
durometer rubber elements. The slips are fully differential pressure.
enclosed in a shear pinned slip housing which is
protected by a full diameter guide located below FEATURES
the slip housing. No Tubing Manipulation required. The setting
mechanism of this Packer is activated with pump
3 Two balanced pistons are utilized during the pressure. The Packer can be set after the well is
setting of the Packer. The lower piston moves flanged up and the Tubing is displaced.
down to set and anchor the slips while the upper
piston moves upward to compress the packing. Setting Mechanism. The design of the setting
mechanism ensures sustained pack-off force
elements. This action imparts the entire setting
throughout life of the Packer. The tool does not
force to both slips and packing thus assuring a depend on trapped hydraulic pressure, but
positive anchor and pack-off. The pack-off is mechanically locks initial setting forces into the
packing elements. Setting activation pressure
retained by a tapered single ratchet ring that locks in and stores the can be adjusted by dressing up with required
number of shear screws.
setting force applied to both the slips and packing elements.
Opposed, Double Grip Slips prevent movement
4 The “BHP-2” Packer incorporates two methods of release, of the Packer in either direction due to pressure
straight pull or rotation. Both methods are done by the same differentials.
releasing nut which is located at the upper end of the Packer.
Unloader valve Provided for equalising the
Straight pull release is accomplished by shearing retaining screws pressure to nullify the swabbing of the Packing
of a predetermined quantity which frees the Tubing. Rotation Element.
release is accomplished by approximately eight right hand turns of
the Tubing which also frees the Packer. Straight pull is then Multiple Packing Element system
applied to completely relax the Packer for retrieval. An equalizing Large Flow Path ID -2.375 I.D. for 5½”
valve is also located in the releasing portion. The positive acting
valve is automatically opened during the releasing procedure to Straight Up-strain release
equalize pressure and allow circulation between the annulus and
Tubing. In addition, a large diameter by-pass area is located inside
the packing mandrel which allows fluid passage for rapid retrieving
while reducing element swabbing.

SPECIFICATION GUIDE SPECIFICATION GUIDE

Casing Packer Casing
Standard
ID range in which Nom Gage Standard I.D. Range in which packer Nom. I.D.
Gauge
Packing Thread
O.D. Weight Packer may be run Ring Thread specification Weight may Run. Size Ring
ID Box up x Pin Down O.D. In inch Element O.D Specification
Min. Max. OD (Ib/ft) O.D.
Size Box X pin
In. In. In. In. In. In. Min. Max
mm lb/ft mm mm mm mm mm
20-23 4.625 4.778 BI 45A2 2.375 4.500 4.375
2 7/8 O.D.
5-1/2 4.625 4.950 1.93 4.500 2-3/8 OD EU 8 RD 5-1/2” 17-20 4.778 4.950 BI45A4 2.375 4.641 4.375 EU. 8RD.
14-23 BI 45A
139.70 117.50 125.70 50.30 114.30 60.33 13-15.5 4.950 5.190 BI45B 2.375 4.781 4.687

71
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “B-AD-1” TENSION PACKERS

Product No. Bl 739-08

DESCRIPTION :
The Model “B-AD-1” Tension Packer is compact, economical
Retrievable Packer. Primarily used in waterflood applications, this
Packer can also be used for production and/or treating operations.
It is used where a set down Packer is impractical. Because the
Model “B-AD-1” is tension set, it is ideally suited for shallow wells
where set down weight is not available.

FEATURE/BENEFITS

l Utilizes BOTIL’s rugged rocker type slips.

l Bore through the Packer mandrel is large than drift.
l Simple, low-cost Packer for fluid injection.
l Three release methods ensure retrievability.
l Uses proven one-piece packing element.

TO SET PACKER

Run Packer to desired setting depth, making the last

movement downward. Rotate the tubing to the left one quarter turn
at the tool. Then, pick up and pack-off.

TO RETRIEVE PACKER
Lower the tubing at least one foot (.031m) more than is needed
to remove applied tension so that the J-pin will move fully to the top
of the J-slot. Rotate the tubing to the right one-quarter turn at the
Packer so slips will now be in the running position. Packer can be
moved to a new position and reset or it can be retrieved.
An optional J-slot, which provides for auto-release of the
Packer by lowering of the Tubing String is provided on special
request.

TO SHEAR RELEASE PACKER

As an alternate release method, the Tension Packer has shear Model “B-AD-1” Tension Packers
Product No. Bl 739-08
rings designed to part at tension varying from 13,000-100,000 lbs.
(5,89 to 45,35 t). The Cone Packing Element and Guide drop down
are carried out of hole by the Bottom Sub.
ORDERING EXAMPLE :
PRODUCT NO. Bl 739-08
TO RELEASE IN EMERGENCY SIZE : 45 A4 (5-1/2" O.D. 15.5-20 lbs/ft Casing) BOTIL
MODEL “B-AD-1" TENSION PACKER w/2-3/8” O.D. E.U.
Left-hand square threads on the Top Sub of the Packer allow 8RD BOX f/J-55, 4.7 lb/ft Tubing x 2-3/8” O.D. N.U. 10 RD
PIN f/J-55, 4.6 lbs/ft Tubing.
the Tubing to be retrieved when the Packer will not otherwise
release.

REQUIRED UPSTRAIN TO SET PACKER

Upstrain
Packer Size
Lbs. Kgs.
41 2,000 907
43 & 45 5,000 2268
47 7,500 3402
49 - 55 15,000 6804

72
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “B-AD-1” TENSION PACKER SPECIFICATION GUIDE

Casing Packer
I.D. Range in which
Weight Packer May Be Run Nom. Guide Ring Thread Specification
O.D.
Size I.D. O.D. Box Up & Pin Down
Min Max
In. mm Lb/ft In. mm In. mm In. mm In. mm In. mm
20-23 4.625 117.5 4.778 121.4 45 A2 4.500 114.30
5½ 139.70 15.5-20 4.778 121.4 4.950 125.7 45 A4 4.641 117.88
13-15.5
5¾ 146.05 22.5 4.950 125.7 5.190 131.8 45 B 4.781 121.44
26 1.97 50.04 2 3/8 60.33 O.D. EU.8.RD.

6 152.40 20-23 5.191 131.9 5.390 136.9 45 C 5.062 128.57

15-18 5.391 136.9 5.560 141.2 45 D 5.156 130.96
34 5.561 141.2 5.595 142.1 45 E2 5.406 137.31
28-32 5.596 142.1 5.791 147.1 45 E4 5.484 139.29
6 5/8 168.28
24 5.830 148.1 5.921 150.4 47 A2 5.656 143.66
17-20 5.922 150.4 6.135 155.8 47 A4 5.812 147.62
38 5.830 148.1 5.921 150.4 47 A2 5.656 143.66
32-35 5.922 150.4 6.135 155.8 47 A4 5.812 147.62
7 177.80 26-29 6.136 155.9 6.276 159.4 47 B2 5.968 151.59
2.42 61.47
20-26 6.276 159.4 6.456 164.0 47 B4 6.078 154.38 2 7/8 73.02 O.D. EU.8.RD.

17-20 6.456 164.0 6.538 166.0 47 C2 6.266 159.16

33.7-39 6.539 166.1 6.765 171.8 47 C4 6.453 163.91
7 5/8 193.68 24-29.7 6.766 171.9 7.025 178.4 47 D2 6.672 169.47
20-24 7.025 178.4 7.125 181.0 47 D4 6.812 173.02
47-53.5 8.300 210.8 8.681 220.5 51 A2 8.218 208.74
4½ 114.30 O.D.8.RD.
9 5/8 244.48 40-47 8.681 220.5 8.835 224.4 51 A4 4.00 101.60 8.437 214.30
LG CSG
29.3-36 8.836 224.4 8.681 220.5 51 B 8.593 218.26

TUBING ANCHOR CATCHER

MODEL “BTA” TUBING ANCHOR CATCHER
Product No. Bl 698-0A

The Model “BTA” acts as a Tubing Anchor to maintain tension

in Tubing String as a Tubing Catcher to prevent parted pipe from
falling to the bottom of the well.

APPLICATION:
Most rod pumping applications where it is important to
maintain tension in the tubing.
FEATURE :
l Rotate left to set, right to release.
l Straight pull emergency shear release.
l Increases pump efficiency.
l Improves operating costs by reducing maintenance and down
time caused by tubing or sucker rod wear.

SPECIFICATION GUIDE
Casing Packer
Min. Max. Size Max Standarad
O.D. Wt.
I.D. I.D. O.D. Box x Pin

2 7/8" EU
5½" 13-23 4.670 5.044 45 A 4.500
8RD
73
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “B” TANDEM TENSION PACKER WITH 4. Rotate 1/6 turn to the right at the Tension Packer to rejay tool.
AND WITHOUT UNLOADER 5. Complete Lock-Set Packer setting Procedure. (Refer to Lock-Set
Product No. BI 602-21, BI 602-22 Packer)
6. Rotate 1/6 turn to the left at the Tension Packer(s)
DESCRIPTION : 7. Pull up to set the Tandem Tension Packer(s) -10,000 lbs.
For size 43,45 and 47, 15,000 lbs for size 49 and 51.
The Model “B” Tandem Tension Packer
features a double J-slot arrangement,
secured in the running position by four shear Tension Required to land
Packer Size Tubing (Lbs)
screws to prevent the Packing Element from 43 6,000
packing-off while running in the hole. Each 45 & 47 8,000
shear screw has value for a total shear value 49 & 51 12,0000
of 10,000 lbs. The tool is set and held
packed-off with tension against a lower TO RELEASE THE PACKER :
Packer, and released by setting down. Slack off on the tubing string to remove the applied tension and
The unloader in Product No. BI 602-21 rotate to the right to obtain 1/6 turn at the tool
remains open while the Packer is run into the
This moves the J-Pins to the bottom of the J-Slots and places them
hole. It is closed when the Packer is set by an
O-Ring located on the Mandrel OD. Set- in the retrieving position for the retrieval from the well.
Down weight applied prior to retrieving
opens the unloader and allows fluid to by- LIMITATIONS :
pass around the Packing Element system for Since the Tandem Tension Packer does not have slips, the
easy retrieval from the well. J-Pins must support the loading across the tool.
TO SET THE PACKER :
After the tools have been run in the hole,
set the lower tool in the standard manner as
detailed in Technical Literature. TOOL SIZE
PRESSURE MAX. J-PIN
AREA (Sq. In) LOAD (Lbs)
If the Tandem Tension Packer is run BI 43A2 9.1
BI 43A4 9.7 25,000
above a Model “BA-2” Lock-Set Retrievable
BI 43C 11.7
Casing Packer the following procedure is BI 45A4 15.6
used : BI 45B 16.3 50,000
BI 45D 20.9
BI 47B4 26.6 60,000
BI 47B6 28.2
BI 49A2 34.3
BI 49A4 37.3
BI 49B 39.8
1. Set the upper slips on the Lock-Set Packer in the standard BI 51A2 46.3
80,000
manner. BI 51A4 49.1
2. Pull up approximately 12,000 lbs. on the Tubing (to shear the BI 51B 51.5
Tandem Tension Packer)
3. Set-down 3,000 lbs. on the Lock-Set Packer.

SPECIFICATION GUIDE

CASING THREAD
PREFERRED RANGE OF CASING IDs
PACKING SPECS.
PACKER SIZE GAGE RING
ELEMENT OD BOX UP & PIN
OD
WT. IN LBS DOWN
OD MIN. MAX.
T&C

11.6-13.5 BI 43A2 3.920 4.000 3.771 3.718

4-1/2
9.5 BI 43A4 4.090 4.090 3.935
5 11.5-15 BI 43C 4.156
4.408 4.560 4.250
5-1/2 26
2-3/8 OD EU 8RD
15.5-17 BI 45A4 4.892 4.950 4.641 4.375
5-1/2
13-15.5 BI 45B 4.950 5.044 4.781 4.688
6 14-16 5.250
BI 45D 5.500 5.595 5.312
6-5/8 34
23-26 BI 47B4 6.276 6.366 6.078
7 5.750 2-7/8 OD EU 8 RD
17-20 BI 47B6 6.456 6.538 6.266
8-5/8 40-49 BI 49A2 7.511 7.725 7.312
6.938
8-5/8 32-40 BI 49A4 7.725 7.921 7.531
8-5/8 20-28 BI 49B 7.922 8.191 7.781 7.500
3-1/2 OD EU 8 RD
9-5/8 47-53.5 BI 51A2 8.300 8.681 8.218
7.938
9-5/8 40-47 BI 51A4 8.681 8.835 8.437
9-5/8 29.3-36 BI 51B 8.836 9.063 8.593 8.313

74
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BG” RETRIEVABLE CASING PACKER To remove the Tubing String from the Packer, rotate the tubing
Product No. BI 420-03 string (under slight tension) at least seven turns to the right. The left-
hand thread that connects the Top Sub to the body will unscrew,
The Model “BG” Retrievable Casing Packer is a compact, permitting the removal of the Tubing String and the Top Sub from
economical set-down Packer that can be used by itself for the well.
production applications or, with a companion unloader and hold-
down, it can be used for well stimulation, testing and other
pressuring operations and then left in the well as a Production
Packer.

FEATURE :

Rugged rocker-type slips and one piece Packing

Element
Full-opening bore through the Packer.
Economical to buy and maintain
Easy to set and release
Safety Joint for emergency disconnection
Can be run upside down as a Tension Packer (without the
emergency release feature)
System functions above 250°F (120°C) with an alternate Packing
Element system
Short and compact for ease of storage, shipping and handling.

TO SET THE PACKER : Run the Packer to a position about one

foot below the setting depth, then pick up to the setting point.
Rotate the tubing to the right ¼ turn at the tool. Apply set down
weight to set and pack-off the tool

TO RELEASE THE PACKER :

Simply pick up the Tubing to release. If the Packer is to be moved

down-hole and reset, rotate the Tubing to the left ¼ turn at the tool
after release.

SET DOWN WEIGHTS

Minimum Set Down
Packer Size
Weight Required
43
45 6,000 lbs.
47x3.300
46&47 10,000 lbs.
49 thru 55 15,000 lbs.

75
 PRODUCTION AND TEST PACKER RETRIEVABLE

SPECIFICATION GUIDE

Absolute
Casing Preferred Range of Cone & Limits of
Packing Thread Specs.
Packer Casing I.D.’s Guide Slop Travel
Element
Size Ring
O.D.
Wt. In Lbs O.D
O.D. Min. Max. Min Max Box up Pin Down
T&C
4-1/2 9.5-13.5 BI43A 3.910 4.090 3.771 3.718 3.709 4.091
5 15-18 BI43.B 4.250 4.408 4.125 3.938 4.103 4.409
5 11.5-15*
BI43C 4.408 4.560 4.250 4.156 4.255 4.561
5-1/2 26
5-1/2 20-23 BI45A2 4.625 4.778 4.500
4.375 4.543 4.966
5-1/2 15.5-20* BI45A4 4.778 4.950 4.641
2-3/8 OD 2-3/8 OD
5-1/2 13-15.5* EU 8RD EU 8RD
5-3/4 22.5 BI45B 4.950 5.190 4.781 4.687 4.825 5.248
6 26
6 20-23 BI45C 5.191 5.390 5.062 5.059 5.482
4.938
6 15-18 BI45D 5.391 5.560 5.156 5.197 5.620
6-5/8 34 BI45E2 5.561 5.595 5.406
5.250 5.449 5.872
6-5/8 28-32 BI45E4 5.596 5.791 5.484
6-5/8 17-20 BI47B2
6.049 6.276 5.812 5.656 5.911 6.400
7 26-29 BIX3.00 3-1/2 OD 3-1/2 OD
BI47B4 EU 8RD EU 8RD
7 20-26 6.276 6.456 6.078 5.781 6.193 6.680
BIX3.00
6-5/8 28-32 BI46A2 5.600 5.791 5.475
6-5/8 24-28 5.375 5.473 6.013
7 38 BI46A4 5.792 5.921 5.588
6-5/8 17-20
7 32-25 BI46B 5.922 6.135 5.781 5.500 5.707 6.247
6-5/8 24
BI7A2 5.830 5.921 5.656
7 38
6-5/8 17-20 5.500 5.653 6.262 2-7/8 OD 2-7/8 OD
BI47A4 5.922 6.135 5.812
7 32-35 EU 8RD EU 8RD
7 26-29 BI47B2 6.136 6.276 5.968
7 20-26* 6.276 5.781 5.919 6.528
BI47B4 6.456 6.078
7 17-20* BI47C2 6.456 6.538 6.266
6.125 6.357 6.966
7-5/8 33.7-39 BI47C4 6.539 6.765 6.453
7-5/8 24-29.7 BI47D2 6.766 7.025 6.672
7-5/8 20-24* 7.025 6.500 6.607 7.216
BI47D4 7.125 6.812
8-5/8 40-49 BI49A2 7.511 7.725 7.312
6.938 7.300 8.059 3-1/2 OD 3-1/2 OD
8-5/8 32-40* BI49A4 7.725 7.921 7.531 EU 8RD EU 8RD
8-5/8 20-28 BI49B 7.922 8.191 7.781 7.500 7.798 8.369
9-5/8 47-53.5 BI51A2 8.300 8.681 8.218
7.938 8.051 8.934
9-5/8 40-47* BI51A4 8.681 8.835 8.437
9-5/8 29.3-36 BI51B 8.836 9.062 8.593 8.312 8.548 9.244 4-1/2 OD 4-1/2 OD
10-3/4 32.7-55.5 BI53A 9.625 10.192 9.500 9.250 9.548 10.192 8 RD 8 RD
11-3/4 38-60 BI53B 10.605 11.200 10.500 10.000 10.503 11.263 Long Csg. Short Csg.
12-3/4 43-53 BI55A 11.750 12.300 11.625 10.875 11.675 12.435
13-3/8 48-72 BI55B 12.300 12.715 12.000 11.687 12.173 12.745

* Packer shown for this weight is recommended and should be run where possible. However, the other
size Packer listed for this same casing weight may be run under certain circumstances, such as running
mixed strings or unusual hole conditions.

76
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BAR-1” SNAP-SET COMPRESSION 3 Simple collet type Snap-latch prevents the Packer from setting
PACKER before landing the seal assembly (or setting a lower Retrievable
Product No. Bl 635-31, Bl-636-31 Packer). The lower portion of the tool is rotationally locked in
order to deliver torque in either direction, through the Packer.
The Model “BAR-1” Snap set Compression Packer, “BAR-1” is
Retrievable Set Down Packer featuring a by pass area through the 4 Versatile - the two models available can fulfill a variety of
Packer and an integral unloader. It is used as the upper Packer in a requirements. The “BAR-1” Compression Packer (without slips)
single string two-Packer installation for zone isolation, injection, or are more economical than the “BMR-1” Packers and may be
productions. The “BMR-1” Packer (without slips) is used above used where differentials from and above are not severe.
either Retainer Production Packers or Retrievable Packers (see
operation) TO SET PACKER ABOVE A SEAL BORE PACKER.
(“BAR-1” ONLY)

1 Run and set a Retainer Production Packer.

2 Make up the Snap Set Packer in Tubing at a desired location and

run the Tubing String into the well until the Locator Sub of the
Tubing Seal Assembly lands in the Retainer Production Packer.

3 Apply set-down weight to set and pack-off the Packer.

TO SET PACKER ABOVE A RETRIEVABLE PACKER.

(“BAR-1” ONLY)

1 Make up both Packers on the Tubing String and run them into
the well.

2 Rotate the Tubing as required to prepare the lower Packer for

setting, and apply set-down weight to set and pack-off both the
Packers.

TO RELEASE THE PACKER :

To release the Packer simply pick up on the tubing string. If the
weight of the Tubing String below the Packer is less than 1,500 lbs,.
the snap latch will not “recock”, and any attempt to lower the tool
back down the hole during retrieving may not be successful. The
unloader will not be locked open. However, if the weight of the
Tubing below the Packer is greater than 1,500 lbs., the snap-latch
will “recock” to the running-in position. The Packer can then be
raised or lowered during the retrieving operation.

FEATURES :

1 Reliable -A Multiple Packing Element system that has been

proven on the Model “BR-3” Retrievable Casing Packer.
2 Simple Operation-No tubing rotation is required. Application of
approximately 7000 lbs. set down (against a lower Packer) will
set and pack-off the packer. A straight up-stain releases the
Packer.

77
 PRODUCTION AND TEST PACKER RETRIEVABLE

MODEL “BAR-1” SPECIFICATION GUIDE

Casing Packer

Preferred Range Packing Packing Gange & “BAR-1”W/Hold-Down Thread

O.D. Weight Element Element Guide Product No. BI636-31 specification
of Casing I.D’S Spacer Ring Absolute L imits o f Box Up x Pin
Size O.D. O.D. O.D. Bottom Travel down
Min Max
Min Max
In In In In In In In In In
mm Lb/ft mm mm mm mm mm mm mm mm
4-1/2 9.5-13.5 3.910 4.090 3.625 3.771 3.771 4.105 2-3/8O.D.
BI43A 3.755 EU.RD
114.30 99.31 103.9 92.08 95.78 95.78 95.38 104.27
60.33
5 4.250 4.408 3.938 4.125 4.125 4.095 4.443 2-3/8 O.D.
15-18 BI43B 100.03 104.78 104.78 112.85 EU. RD
127.00 107.9 112.0 104.01 60.33
11.5-15 4.560 4.156 4.250 4.250 4.251 4.599 2-3/8 O.D.
4.408 BI43C EU. 8RD
112.0 115.8 105.56 107.95 107.95 107.98 116.81
26 60.33
2-3/8 O.D.
BI45A2 EU. 8RD
4.625 4.777 4.375 4.500 4.500 4.514 4.950 60.33
20-23 111.13 114.30 114.30
117.5 121.3 114.66 125.73 2-7/8 O.D.
BI45A2x2-3/8 EU.8RD
73.02
15.5-20 4.778 4.950 2-3/8 O.D.
121.4 125.7 BI45A4 EU. 8RD
5-1/2 14-20
139.70 4.375 4.500 4.641 4.514 4.950 60.33
4.892 111.13 114.30 117.88 114.66 125.73 2-7/8 O.D.
17-20 4.778 BI45A4x2-3/8
124.2 EU. 8RD
121.4 5 73.02
4.950 5.190 2-3/8 O.D.
BI45B EU. 8RD
125.7 131.8 60.33
13-15.5
4.893 5.044 2-3/8 O.D.
124.3 128.1 BI45Bx2-3/8 EU.8RD
73.02
4.688 4.781 4.781 4.764 5.196
4.950 5.190 BI45B 119.08 121.44 121.44 120.55 131.98 2-7/8 O.D.
5-3/4 125.7 131.8
146.05 22.5 EU. 8RD
60.33
4.893 5.044 2-3/8 O.D.
6 124.3 128.1 BI45Bx2-3/8
152.4 26 EU. 8RD
73.02
6 5.191 5.390 4.938 5.062 5.062
152.4 20-23 131.85 BI45C
136.91 125.43 128.57 128.57 4.968 5.631
5.391 126.19 143.03
6 5.560 BI45 D 4.938 5.156 5.156
152.4 15-18 136.93 141.22 125.43 130.96 130.96
2-7/8 O.D.
5.561 5.609 5.406 EU. 8RD
34 141.2 BI45E2 137.31 60.33
142.5
5.250 5.406 5.122 5.791
5.610 137.31 130.10 147.09
142.5 5.791 133.35 5.484
6-5/8 28-32 147.1 BI45E4 139.29
5.600
168.28 142.2

24 5.830 5.937 BI47A2 5.656

148.1 150.8 143.66 2-7/8 O.D.
5.500 5.656 5.548 6.139
139.7 143.66 140.92 155.93 EU. 8RD
5.938 6.135 73.02
17-20 BI47A4 5.812
150.8 155.8 147.62
5.830 5.937 5656
7 38 148.1 BI47A2
150.8 5.500 5.656 143.66 5.548 6.139
177.80 5.938 6.135 143.66 5.812
32-35 BI74A4 139.7 140.92 155.93
150.8 155.8 147.62
6.136 6.276 5.968
26-29 155.85 BI47B2
7 159.41 5.750 151.59 5.858 6.456
5.968
177.80 6.276 6.456 146.05 151.59 6.078 148.79 163.98
20-26* 159.41 163.98 BI47B4
154.38
7 6.456 6.578 2-7/8 O.D.
17-20* 163.98 BI47C2 6.266
177.80 167.08 EU. 8 RD
6.125 6.266 159.16
73.02
155.58 159.16
7-5/8 6.579 6.797 BI47C4 6.453
193.68 33.7-39 167.11 172.64 163.91 6.259 7.397
158.98 187.88
7-5/8 6.798 7.025 6.672
24-29.7 BI47D2
193.68 172.67 178.44 169.47
6.500 6.672
7-5/8 7.125 165.1 169.47 6.812
7.025
20-24 BI47D4
193.68 178.44 180.98 173.02

* P acker shown for this weight is recommeded and should be run where possible, however, the other size Packer
listed for this same casing weight may be run under certain circumstances, such as running mixed strings or unusual
hole condition.

78
 PRODUCTION AND TEST PACKER RETRIEVABLE

BALL CATCHER SUB BOTIL AUTO FILL PUMP OUT PLUG

Product No: - BI 409-77 Product No. BI 799-29

DESCRIPTION: DESCRIPTION:

The Ball catcher sub provides a means of catching the ball and The Model Auto-fill Pump Out Plug is used as a tubing Plug
sheared out ball seat from a landing collar. It incorporates a device against which pressure can be applied in order to set
perforated baffle plate to catch the ball and ball seat yet allows fluid
Hydraulic Set Packers. The Pump out Ball Seat Sub is made up in
passage without restriction.
the tail pipe below the Packer to be set. In this model with the ball
seating down, the Pump out Plug acts as a reverse check valve
FEATURES/BENEFITS: preventing flow down the
string, while allowing the
l Large bypass area-the Baffle Plate in string to fill from below.
the catcher sub is made with multiple
Without need to drop a ball to
sets of large diameter holes. These
holes are sized to catch the ball and seat, the tubing can be
seat, but allow fluid to pass through the pressured up . Once the
tool without plugging. Packer is set, tubing pressure
is increased to values shown
l Internal parts rotationally locked. in the chart below to shear the
screws holding the ball seat
sub. The ball seat and the ball
with spring etc. are blown out
of the sub to the bottom of the
well. Any tubing run below the
ball seat sub should have
Auto Fill Pump Out Plug
sufficient I.D. clearance to Product No. BI 799-29
permit passage of the ball, ball
seat ,spring etc.
Ball Catcher Sub
Product No: - BI 409-77

PRESSURE VALUES TO SHEAR BALL SEAT

Size Pressure Required (±400 PSI)

Sub
Number of Screws
2 3 4 5 6 7 8 10 12 16
2-3/8 1,500 2,250 3,000 3,750 4.500 - - - - -
2-7/8 1,500 2,250 3,000 3,750 4.500 - - - - -
3-1/2 1,000 1,500 2,000 2,500 3,000 3,500 - - - -
4-1/2 900 1,300 1,700 2,100 2,500 2,900 3,300 - - -
5-1/2 - - 1,400 1,750 2,100 2,450 2,800 3,500 4.200 5,600
6-5/8 - - - - 1,000 1,250 1,500 2,500 2,500 -

The number of screws installed in the Pump out Plug must be compatible with the pressure required to set
Packe

79
 PRODUCTION AND TEST PACKER RETRIEVABLE

SHEAR-OUT BALL SEAT SUB FLOW COUPLING

Product No. BI 799-27 Product No. BI 819-20, 25, 26,27

WIRELINE ENTRY GUIDE WITH SHEAR-OUT BALL DESCRIPTION AND APPLICATION

SEAT
The Flow Coupling is a thick-walled section of Tubing that
Product NO. BI 469-21
minimises the resultant effects of internal erosion that can occur in
a Tubing String in a flowing well. Changes in the diametral cross-
The Shear-Out Ball Seat Sub and the Wireline Entry Guide with
Shear-Out Ball Seat are installed on the bottom end of the Tubing section of a flow stream cause turbulence which accentuates the
to allow the Tubing String to be pressured. When the differential erosive effects of abrasive particles carried in the flow stream and
pressure at the tool reaches a predetermined value the ball and can also cause erosion by cavitation effects. Flow Couplings are
seat are pumped out of the tool. After the Ball Seat has been commonly installed immediately downstream and upstream of
pumped out, these subs allow unrestricted access from the Tubing major turbulence inducing locations in a Tubing column.
into the casing below the Tubing String.
The Flow Coupling OD and ID are sized to be compatible with
These products are available in a variety of configurations. The the particular Tubing size weight with which they are intended to be
tool illustrated here offers both a reentry guide to simplify wireline utilised, and are provided with this appropriate tubing thread
operations (Prod. No. BI 469-21 only) as well as a optional conical connections.
guide to facilitate easy entry when running the tubing through the
top of a Liner or into a Seal Bore Packer. Other options include a
solid Pump-Out Plug and expendable Check Valves. The Shear-
Out Ball Sub (Prod. No. BI 799-27) can also be furnished in a box x
pin configuration for those applications where it is necessary to run
additional Tubing or completion equipment below the Shear-Out
Ball Seat Sub.

CAUTION : Since each of these tools expend a Ball and Ball

Seat during their operation, it is necessary to ensure those parts
will safely pass through all equipment which is located below them.

Wireline Entry Guide

with Shear-Out Ball Seat
(show with Optional
Conical Guide )
Product No. BI 469-21

Product No. Bl-799-27

SPECIFICATION GUIDE

Ball ID After
Size Diameter Shifting Standard THD PRODUCT CLASSIFICATION
Specification Box Up (A) BI 819-20 4140 Steel heat treated to 30-36 Rc
In. In.
mm mm mm BI 819-25 4140 Steel heat treated to 18-22 Rc
2-3/8 1-7/16 2.000 2-3/8 EU 8 RD BI 819-26 9Cr 1MO heat treated to 18-22 Rc
60,33 36,50 50,80 60,33 BI 819-27 13Cr 1MO heat treated to 18-22 Rc
2-7/8 1-3/4 2.437 2-7/8 EU 8 RD
73,03 44,45 61,90 73,03
3-1/2 2-1/2 3.000 3-1/2 EU 8 RD
88,90 63,50 76,20 88,90
(A) Threads specified are standard, other threads available upon request.
* These can be furnished in customer specified dimensions also.

80
 PRODUCTION AND TEST PACKER RETRIEVABLE

SAFETY JOINT MODEL “B” SHEAR-OUT SAFETY JOINT

Product No. BI 441-01 Product No. BI 441-31

The Safety Joint provides for emergency recovery of the major The Model “B” Shear-Out Safety Joint is designed for use
portion of the Tubing String should it become necessary to abandon between a Packer and a Sand Screen to provide a means of
the equipment below. Precision left-hand square threads facilitate releasing and retrieving the production string, should the screen
release of the joint by right-hand Tubing rotation. Equipment become sanded in. It may also be used in any application where an
requiring right-hand rotation should not be used below the Safety up-strain type of releasing device can be used.
Joint.
The Shear-Out Safety Joint can be run with from 2 to 16 Brass
Shear Screws, each valued at 2,500 lb. (1,13t), allowing the shear
value of the tool to be varied from 5,000 to 40,000 lb. The tool is
shipped with all 16 Brass Shear Screws in place. Remove the
necessary number of shear screws required to obtain the desired
releasing pull; i.e., if a releasing pull of 15,000 lb. is desired remove
all but six (6 x 2,500 = 15,000) screws. The remaining screws
should be as evenly spaced as possible.

ORDERING EXAMPLE :
SIZE : 2-7/8 SAFETY JOINT w/2-7/8” OD EU 8 RD Box x Pin for

SPECIFICATION GUIDE ORDERING EXAMPLE :

SIZE : 3-1/2 MODEL “B” SHEAR OUT SAFETY JOINT w/3-1/2”
Nom Nom Standard Thread*
OD ID Specification
Size (Box Up & Pin Down)
In. In. In. SPECIFICATION GUIDE
mm mm mm
2.22 1.53 1.900 NU 10 RD Standard Thread*
1.900 Nom Nom
56,39 38,86 48,26 Size Specification
OD ID
(Box Up & Pin Down)
2.88 2.00 2-3/8 EU 8 RD
2-3/8 In In In
73,15 50,80 60,33 mm mm
mm
3.69 2.44 2-7/8 EU 8 RD
2-7/8 3-1/2 3.88 3.06 3-1/2 NU 10 RD
93,73 61,98 73,03 98,55 77,72 88,90
4.50 2.98 3-1/2 EU 8 RD 4.34 3.43 4 NU 8 RD
3-1/2 4
114,30 75,69 88,90 110,24 87,12 101,60

* Threads shown below are “standard” for the respective sizes. Other threads are * Threads shown are “standard” for the respective sizes. Other threads are
available on request. available on request.

81
 PRODUCTION AND TEST PACKER RETRIEVABLE
____________________________________________________
BOTIL MODEL NON ROTATIONAL The running string is disconnected by 15 left
SHEAR OUT SAFETY JOINT turns, and then the valve closes
Product No. BI 441-32 automatically. This quick, safe, cost
effective well closing requires no tubing
DESCRIPTION & APPLICATION pulling. The valve has an expandable plug
that provides through bore access for
The BOTIL Non Rotational Shear-Out circulation or wireline passage. After the
Safety Joint is used between packers in string is reconnected, the valve opens
dual and triple completions and in selective automatically to equalize pressure for
completions using Hydrostatic Single-String packer retrieval.
Packers. It is also used when rotational
releasing is not desired. When run above FEATURES/BENEFITS
the upper packer in a single-string
completion, however, the shear value  Weather emergencies
should be adjusted to compensate for any  Wellhead repair
hydraulic conditions that exist when the  The rugged alloy-steel construction
string is landed, or that are created by well ensures dependability
treating operations. This Model has Torque  The simple, field proven design
transmission feature. eases valve operation and
redressing
 The expandable plug provides
through bore access for circulation
and wirelines.
 The valve equalizes automatically
during string reconnection, enabling
fast packer retrieval.

BOTIL MODEL “BNC” STORM VALVE

Product No. BI 442-10

DESCRIPTION & APPLICATION

The BOTIL Model “BNC” Storm Valve is run

above the compression set service packer
to isolate the tubing below the packer for
disconnection during weather emergency or
surface equipment repair.

81.I