Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • AWS D1.1 - Bend PDF

    Uploaded by

    VIVEK
    287 views1 page
    The document provides qualification requirements for welding procedures based on the specified or actual base metal yield strength of the material. It lists minimum thickness requirements in millimeters for guided bend test specimens in columns A through D depending on whether the yield strength is 50 ksi or under, over 50 ksi to 90 ksi, or 90 ksi and over. It also notes that plunger and interior die surfaces of the guided bend test jig must be machine-finished.

    Original Description:

    Original Title

    AWS D1.1 - bend.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document provides qualification requirements for welding procedures based on the specified or actual base metal yield strength of the material. It lists minimum thickness requirements in millimeters for guided bend test specimens in columns A through D depending on whether the yield strength is 50 ksi or under, over 50 ksi to 90 ksi, or 90 ksi and over. It also notes that plunger and interior die surfaces of the guided bend test jig must be machine-finished.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    287 views1 page

    AWS D1.1 - Bend PDF

    Uploaded by

    VIVEK
    The document provides qualification requirements for welding procedures based on the specified or actual base metal yield strength of the material. It lists minimum thickness requirements in millimeters for guided bend test specimens in columns A through D depending on whether the yield strength is 50 ksi or under, over 50 ksi to 90 ksi, or 90 ksi and over. It also notes that plunger and interior die surfaces of the guided bend test jig must be machine-finished.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    CLAUSE 4. QUALIFICATION AWS D1.1/D1.

    1M:2015

    A B C D
    Specified or Actual Base Metal Yield Strength in [mm] in [mm] in [mm] in [mm]
    50 ksi [345 MPa] & under 1-1/2 [38.1] 3/4 [19.0] 2-3/8 [60.3] 1-3/16 [30.2]
    over 50 ksi [345 MPa] to 90 ksi [620 MPa] 2 [50.8] 1 /[25.4] 2-7/8 [73.0] 1-7/16 [36.6]
    90 ksi [620 MPa] & over 2-1/2 [63.5] 1-1/4 [31.8]- 3-3/8 [85.7] 1-11/16 [42.9]
    Note: Plunger and interior die surfaces shall be machine-finished.

    Figure 4.11—Guided Bend Test Jig (see 4.9.3.1)

    150

    You might also like