Alexia 100
Alexia 100
Alexia 100
• Proven performance
Shell Alexia 100 • Reliable protection
Shell Alexia 100 is a cylinder lubricant designed for use in two stroke low speed diesel engines using residual fuel
oil with high sulphur content. It is a BN100 and SAE 50 lubricant, formulated with proven and reliable technology.
Performance, Features & Benefits · MHI two stroke engine designs (provided the
recommendations in the engine type specific guidelines are
Reliable engine performance:
· Minimal deposits on pistons, piston rings, ring grooves, · Insufficient cylinder oil feed rate can lead to corrosive wear,
seized and broken rings, and consequent blow-by and
under piston spaces and in cylinder ports; low cylinder and
piston ring wear scavenge fire risks, and to the formation of excess deposits.
· Low maintenance costs: To obtain optimum performance with Shell Alexia 100 it is
important to:
·
Keeps engines clean, minimizes maintenance requirements
Observe the engine manufacturer's recommended cylinder
and allows periods between overhauls to be extended.
oil feed rates as a minimum
·
Reassurance:
· Proven ability to keep engines clean and control wear and · Ensure the lubricator drive system is well maintained and
properly adjusted
scuffing
Main Applications
· Clean and overhaul lubricator boxes according to
manufacturer's recommendations.
Shell Alexia 100 is a BN70 cylinder lubricant for use in low
speed diesel engines burning heavy fuel oil. For detailed
· Regularly monitor lubricant performance through use of tools
such as Shell LubeAnalyst and Shell LubeMonitor
application advice based on your specific engine type and
For a full listing of equipment approvals and
operating conditions, please refer to manufacturer's
recommendations, please consult your local Shell Technical
guidelines.
Helpdesk.
Specifications, Approvals & Recommendations
Compatibility & Miscibility
Shell Alexia 100 has been approved for use in:
· MAN-ES two stroke engine designs (provided the · Mixing of cylinder lubricants
followed)
Flash Point 0
C minimum ASTM D93 210
Pour Point 0
C maximum ISO 3016 -6
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
http://www.epc.shell.com
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.