Owner’s Manual

AC DC

AC & BATTERY
POWERED

FET
1
Thank you, and congratulations on your choice of BOSS TU-2 Chromatic Tuner.

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and
“IMPORTANT NOTES” (p. 28–34; 5–7). These sections provide important information con-
cerning the proper operation of the unit. Additionally, in order to feel assured that you have
gained a good grasp of every feature provided by your new unit, Owner’s manual should be
read in its entirety. The manual should be saved and kept on hand as a convenient reference.

Copyright © 1998 BOSS CORPORATION

All rights reserved. No part of this publication may be reproduced in any form without the
written permission of BOSS CORPORATION.
2
Features
• The ideal tuner for use in live concert situations.

• Since the TU-2 uses the same shape and structure as other Boss compact effect
units, it features excellent durability and allows neat connection with other effect
units.

• The OUTPUT is muted when the tuning function is on, allowing you to tune
without being heard.

• High-luminosity LEDs allow visual tuning even in outdoor sunlight.

• You can choose from two types of meter display: CENT (normal needle-style
movement), or STREAM (a flow of lights indicates the pitch deviation).

• In addition to chromatic mode which indicates the note name of the input sound,
you can also use Guitar/Bass mode which displays the string number. (5-string
bass is supported.)

3
• In Guitar/Bass mode, you can also use Flat tuning (a semitone down) or Double-
flat tuning (a whole step down).

• When the tuner is off, a battery conservation function minimizes power con-
sumption.

• By using an AC adapter (sold separately) with the DC 9V in/out jacks, you can
supply power to other compact effect units as well.

4
IMPORTANT NOTES
In addition to the items listed under “USING THE UNIT SAFELY” on page 28–34, please read
and observe the following:

Power Supply: Use of Batteries • A battery was installed in the unit before it
• Do not use this unit on the same power left the factory. The life of this battery may
circuit with any device that will generate be limited, however, since its primary pur-
line noise (such as an electric motor or pose was to enable testing.
variable lighting system). • Before connecting this unit to other de-
• The AC adaptor will begin to generate vices, turn off the power to all units. This
heat after long hours of consecutive use. will help prevent malfunctions and/or
This is normal, and is not a cause for con- damage to speakers or other devices.
cern.
Placement
• Batteries should always be installed or re-
placed before connecting any other de- • Using the unit near power amplifiers (or
vices. This way, you can prevent malfunc- other equipment containing large power
tion and/or damage to speakers or other transformers) may induce hum. To allevi-
devices. ate the problem, change the orientation of
this unit; or move it farther away from the
source of interference.
5
• This device may interfere with radio and Maintenance
television reception. Do not use this de- • For everyday cleaning wipe the unit with a
vice in the vicinity of such receivers. soft, dry cloth or one that has been slightly
• Do not expose the unit to direct sunlight, dampened with water. To remove stub-
place it near devices that radiate heat, born dirt, use a cloth impregnated with a
leave it inside an enclosed vehicle, or oth- mild, non-abrasive detergent. Afterwards,
erwise subject it to temperature extremes. be sure to wipe the unit thoroughly with a
Excessive heat can deform or discolor the soft, dry cloth.
unit.
• Never use benzine, thinners, alcohol or
• To avoid possible breakdown, do not use solvents of any kind, to avoid the possibil-
the unit in a wet area, such as an area ex- ity of discoloration and/or deformation.
posed to rain or other moisture.
Additional Precautions
• Use a reasonable amount of care when
using the unit’s buttons, sliders, or other
controls; and when using its jacks and
connectors. Rough handling can lead to
malfunctions.

6
• Never strike or apply strong pressure to
the display.
• When connecting / disconnecting all
cables, grasp the connector itself—never
pull on the cable. This way you will avoid
causing shorts, or damage to the cable’s
internal elements.
• To avoid disturbing your neighbors, try to
keep the unit’s volume at reasonable lev-
els. You may prefer to use headphones, so
you do not need to be concerned about
those around you (especially when it is
late at night).

7
Panel Description
1. DC 9V In jack
2 1 8 An AC adapter (BOSS PSA-Series: sold sepa-
rately) can be connected to this jack. If an
AC adapter is used, you will be able to play
5 for extended periods without worrying about
battery life.
3 4
* As soon as you connect the AC adapter, the
7 6 unit is turned ON.

10 9 2. DC 9V Out jack
When an AC adapter is used, you can con-
nect a PCS-20A parallel DC cord (sold sepa-
11 rately) to supply power to other 9V effect
units.
* Power cannot be supplied when the TU-2 is
12 running on batteries.
* When using a DC 9V Out jack, make sure
that the total current consumption of the TU-
2 and other effects being supplied does not
13 exceed 200 mA.
8
3. Meter STREAM display
The meter indicates the pitch deviation of Deviation of the input pitch will be shown
the input sound from the note name or string by a flow of lights toward left or right.
number that is shown in the note name / The lights will flow toward the left if the in-
string number indicator. put pitch is flat, and toward the right if the
input pitch is sharp.
CENT display As the pitch deviation decreases, the flow
The LED that is lit will be further toward the will become slower, and the flow will stop
left as the input pitch is flat, and further to- when the pitch is correct.
ward the right as the input pitch is sharp.
The pitch is correct when the center (green) 4. Note name / String number indicator
indicator of the meter is lit. In Chromatic mode, this indicates the note
name.
In Guitar/Bass mode, this indicates the string
number.

9
5. Tuning guide indicators 6. MODE select switch
These will light to roughly indicate the tun- This switch changes the tuning mode.
ing. When this switch is first pressed, the meter
will blink to indicate the current mode.
The pitch is flat If you press the switch again, the meter will
cycle through the following modes, and the
The pitch is sharp corresponding indicator will light.
Bass Double Flat
The pitch is correct Bass Flat
(within +/-3 cents) Bass Chromatic

Guitar
Guitar Flat
Guitar Double Flat

10
7. STREAM/CENT select switch 9. INPUT jack
This switches the meter display method. Use this jack to connect the electric guitar /
The meter will indicate the selected display electric bass that you wish to tune.
method for approximately two seconds after * When a battery is used, the input jack also
the method has been switched. functions as a power switch. When a plug is
inserted into the input jack, the power will
8. CHECK indicator be turned on. When the plug is pulled out,
This shows the Tuner On/Off status and also the power will be turned off. When you are
serves as a battery check indicator. not using the tuner, pull the plug out of the
This indicator will light when the tuner is on. input jack.
If the indicator is dim or fails to light when
the tuner is on, the battery has run down, 10. OUTPUT jack
and should be replaced with a new battery Connect your amp or another effect unit to
as soon as possible. For the procedure, refer this jack.
to “Changing the battery” (page 23). When the tuner is off, this will output the sig-
* The CHECK indicator shows whether the ef- nal of the instrument connected to the Input
fect is being applied or not. It does not indi- jack.
cate whether the power to the device is on or When the tuner is on, no sound will be out-
not. put from this jack, so use this jack if you wish
to tune silently.
11
11. BYPASS jack
Connect your amp or another effect unit to
this jack.
This jack will always output the signal from
the instrument connected to the Input jack.
Use this jack if you want to be heard while
you tune.

12. Pedal switch

Pressing this switch will turn the tuner on/off.

13. Thumbscrew
When this screw is loosened, the pedal will
open, allowing you to change the battery.
For the procedure, refer to “Changing the
battery” (page 23).

12
Connections
* Before connecting or disconnecting any patch cords, be sure all the volume controls in your
system are set to minimum. This will help prevent any damage to system components.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the vol-
ume, and turn off the power on all devices before making any connections.
* If there are batteries in the unit while an AC adaptor is being used, normal operation will con-
tinue should the line voltage be interrupted (power blackout or power cord disconnection).
(OUTPUT) If you do not want to be heard while tuning
Parallel DC cord (PCS-20A: optional)
AC Adaptor
OUT DC 9V / (PSA-Series: optional)
200 mA

Electric Guitar

Amplifier Boss compact other

effect units
Electric Bass

(BYPASS) If you want to be heard while tuning

13
Turning on the power
* Always make sure to have the volume level of your amp turned down before switching on power.
Even with the volume all the way down, you may still hear some sound when the power is
switched on, but this is normal, and does not indicate a malfunction.

If you are using an AC adapter If you are using a battery

The power will be turned on when you con- The power will be turned on when you insert
nect the AC adapter to the DC 9V In jack. a plug into the Input jack.

When the power is turned on, the meter will light to indicate the current tuning mode. Then
the note name / string number indicator will indicate the first digit of the currently selected
standard pitch.

440 Hz

14
Tuning in chromatic mode
* If you wish to change the standard pitch, do so before you begin tuning (page 20).

1. Press the MODE select switch several 3. Play a single note on your instrument.
times to make “CHROMATIC” light. The name of the note closest to the pitch
* When the TU-2 is shipped from the fac- of the input sound will appear in the note
tory Chromatic mode is selected. name / string number indicator, and the
meter will indicate the pitch deviation.

(Note name display)

C C# D D#

E F F# G
2. If the tuner is not on (CHECK should be
G# A A# B
lit), press the pedal to turn it on.

4. Tune your instrument.

15
Tuning in Guitar mode
* If you wish to change the standard pitch, do so before you begin tuning (page 20).

1. Press the MODE select switch several If you are using flat tuning (semitone
times to make “GUITAR” light. down) make “ ” light. If you are using
double flat tuning (whole step down)
make “ ” light.

Flat tuning

Double flat tuning

16
2. If the tuner is not on (CHECK should be
lit), press the pedal to turn it on.

3. Play a single note on your instrument.

The string number closest to the pitch of
the input sound will appear in the note
name / string number indicator, and the
meter will indicate the pitch deviation.

(String number display)

1st string E 2nd string B

3rd string G 4th string D

5th string A 6th string E

4. Tune your instrument.

17
Tuning in Bass mode
* If you wish to change the standard pitch, do so before you begin tuning (page 20).

1. Press the MODE select switch several If you are using flat tuning (semitone
times to make “BASS” light. down) make “ ” light. If you are using
double flat tuning (whole step down)
make “ ” light.

Flat tuning

Double flat tuning

18
2. If the tuner is not on (CHECK should be
lit), press the pedal to turn it on.

3. Play a single note on your instrument.

The string number closest to the pitch of
the input sound will appear in the note
name / string number indicator, and the
meter will indicate the pitch deviation.

(String number display)

1st string G 2nd string D

3rd string A 4th string E

LoB (5th string) B

4. Tune your instrument.

19
Adjusting the standard pitch
1. Simultaneously press the MODE select 440 441 442 443
switch and the STREAM/CENT select
switch. 439 438 445 444

When you press the STREAM/CENT se-

lect switch, the standard pitch will
change as follows.

2. The first digit of the currently selected

standard pitch (0, if 440 Hz) will blink in
the note name / string number display.

3. Press the MODE select switch to change 440 441 442 443
the standard pitch as follows.
439 438 445 444

The standard pitch will be memorized

until the power is turned off.
When you turn off the power, the stan-
dard pitch will be reset to 440 Hz.
20
Memorizing the standard pitch
With the factory settings, the TU-2 will return to a standard pitch of 440 Hz when the power
is turned off.
If you wish to leave the standard pitch at a setting of other than 440 Hz, you can use the
following procedure to memorize the standard pitch.

1. Turn on the power while holding down the MODE select switch.
The note name / string number indicator will show “n“ (standard pitch not
memorized).

2. While continuing to hold down the MODE select switch, press the STREAM/
CENT select switch within two seconds to make the note name / string number
indicator light “P“ (standard pitch memorized).

3. When you release the meter display method select switch and the MODE select switch,
the TU-2 will return to normal operation.

With this setting, the standard pitch will be memorized even if the power is turned off.

21
Storefront demo display
1. Turn on the power while holding down the STREAM/CENT select switch.

2. Continue holding down the switch for approximately two seconds.

3. The storefront demo display mode will begin. Release the switch.

4. The demo will continue until you turn the power off and on again, or until you operate
the pedal switch.

* Do not use when operating on batteries. This will run the battery down.

22
Changing the battery
When the CHECK indicator goes dim or no 1. Loosen the thumbscrew at the front of the
longer lights while an effect is on, it means pedal, then lift the pedal upwards to open
that the battery is nearly dead and must be the unit.
replaced. * The thumbscrew can be left in the pedal
Replace the battery following the steps be- while changing the battery.
low.
2. Remove the old battery from the battery
Thumbscrew housing, and remove the battery snap con-
Pedal nected to it.
Spring Base
3. Connect the battery snap to the new bat-
tery, and place the battery inside the bat-
Coil Spring
tery housing.
Battery Snap Cord
* Be sure to carefully observe the battery’s
polarity (+ versus -).
Guide
Bush 4. Slip the coil spring onto the spring base on
Hole
the back of the pedal, then close the pedal.
Battery Snap * Carefully avoid getting the snap cord
Battery caught in the coil spring.
Housing
9V Battery 5. Finally, insert the thumbscrew into the
guide bush hole and fasten it securely.
23
Various types of tuning
By using Chromatic mode Open D Open G
you can tune in a variety of Raise / Lower Note name Raise / Lower Note name
ways.
6th string D 6th string D
First, tune normally to get
each string in tune. Then re- 5th string — A 5th string G
fer to the following tables 4th string — D 4th string — D
and adjust each string to the 3rd string F# 3rd string — G
appropriate note name. 2nd string A 2nd string — B
1st string D 1st string D

Regular tuning Open E Open A

Raise / Lower Note name Raise / Lower Note name Raise / Lower Note name
6th string — E 6th string — E 6th string — E
5th string — A 5th string B 5th string — A
4th string — D 4th string E 4th string E
3rd string — G 3rd string G# 3rd string A
2nd string — B 2nd string — B 2nd string C#
1st string — E 1st string — E 1st string — E
24
 Semitone flat
Drop D (Guitar is also possible) 1 and a half steps flat
Raise / Lower Note name Raise / Lower Note name Raise / Lower Note name
6th string D 6th string D# 6th string C#
5th string — A 5th string G# 5th string F#
4th string — D 4th string C# 4th string B
3rd string — G 3rd string F# 3rd string E
2nd string — B 2nd string A# 2nd string G#
1st string — E 1st string D# 1st string C#

1 note flat
DADGAD (Guitar is also possible) 2 whole tones flat
Raise / Lower Note name Raise / Lower Note name Raise / Lower Note name
6th string D 6th string D 6th string C
5th string — A 5th string G 5th string F
4th string — D 4th string C 4th string A#
3rd string — G 3rd string F 3rd string D#
2nd string A 2nd string A 2nd string G
1st string D 1st string D 1st string C
25
Specifications
TU-2: Chromatic Tuner

Reference Pitch .......... A4 = 438 to 445 Hz (1 Hz step)

Tuning Range ............. C0 (16.35 Hz) to C8 (4186 Hz)
Tuning Accuracy ........ +/-3 cents
Input Impedance ........ 1 MΩ
Controls ..................... STREAM/CENT select switch, MODE select switch, Pedal switch
Indicators ................... Meter, Note name/String number indicator, Tuning guide indicators,
Check indicator
Connectors ................ Input jack, Output jack, Bypass jack, DC 9V In jack, DC 9V Out jack
Power Supply ............. DC 9V: Dry battery (6F22/9V), AC Adaptor (PSA-Series: Optional)
Current Draw ............. 55 mA (Max.)
* Expected battery life under continuous use:
Carbon: 1.5 hours (When the tuner is continuously on)
6 hours (When the tuner is on for one minute and off
for three minutes)
Alkaline: 6 hours (When the tuner is continuously on)
These figures will vary depending on the actual conditions of use.

26
Dimensions ................ 73 (W) x 129 (D) x 59 (H) mm
2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches
Weight ....................... 420 g / 15 oz (including battery)
Accessories ................ Owner's Manual
Dry battery; 6F22/9V (Carbon)
Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
Options ...................... AC Adaptor PSA-Series
Parallel DC Cord PCS-20A

* In the interest of product improvement, the specifications and/or appearance of this unit are
subject to change without prior notice.

27
 Used for instructions intended to alert The symbol alerts the user to important instructions
the user to the risk of death or severe or warnings.The specific meaning of the symbol is
injury should the unit be used determined by the design contained within the
improperly. triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of injury or material The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
damage should the unit be used
must not be done is indicated by the design contained
improperly. within the circle. In the case of the symbol at left, it
* Material damage refers to damage or means that the unit must never be disassembled.
other adverse effects caused with The ● symbol alerts the user to things that must be
respect to the home and all its carried out. The specific thing that must be done is
furnishings, as well to domestic indicated by the design contained within the circle. In
animals or pets. the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.

28
 004
• Never use or store the unit in places
001 that are:
• Before using this unit, make sure to • Subject to temperature extremes
read the instructions below, and the (e.g., direct sunlight in an enclosed
Owner's Manual. vehicle, near a heating duct, on top
of heat-generating equipment); or
...............................................................................
002c are
• Do not open (or modify in any way) • Damp (e.g., baths, washrooms, on
the unit or its AC adaptor. wet floors); or are
............................................................................... • Humid; or are
003 • Exposed to rain; or are
• Do not attempt to repair the unit, or • Dusty; or are
replace parts within it (except when • Subject to high levels of vibration.
this manual provides specific instruc- ...............................................................................
tions directing you to do so). Refer all 007
servicing to your retailer, the nearest • Make sure you always have the unit
Roland Service Center, or an autho- placed so it is level and sure to remain
rized Roland distributor, as listed on stable. Never place it on stands that
the "Information" page. could wobble, or on inclined surfaces.
............................................................................... ...............................................................................
008b

29
008b 010
• Use only the specified AC adaptor • This unit, either alone or in combina-
(PSA-Series), and make sure the line tion with an amplifier and head-
voltage at the installation matches the phones or speakers, may be capable of
input voltage specified on the AC producing sound levels that could
adaptor's body. Other AC adaptors cause permanent hearing loss. Do not
may use a different polarity, or be operate for a long period of time at a
designed for a different voltage, so high volume level, or at a level that is
their use could result in damage, mal- uncomfortable. If you experience any
function, or electric shock. hearing loss or ringing in the ears,
............................................................................... you should immediately stop using
008d
the unit, and consult an audiologist.
• When using a DC 9V Out jack, make
sure that the total current consump- ...............................................................................
011
tion of this unit and other effects • Do not allow any objects (e.g., flam-
being supplied does not exceed 200 mable material, coins, pins); or liquids
mA. of any kind (water, soft drinks, etc.) to
...............................................................................
009 penetrate the unit.
• Avoid damaging the power cord. Do ...............................................................................
not bend it excessively, step on it,
place heavy objects on it, etc. A dam-
aged cord can easily become a shock
or fire hazard. Never use a power
cord after it has been damaged.
...............................................................................
30
012c 014
• Immediately turn the power off, • Protect the unit from strong impact.
remove the AC adaptor from the out- (Do not drop it!)
let, and request servicing by your ...............................................................................
retailer, the nearest Roland Service 015
Center, or an authorized Roland dis- • Do not force the unit's power-supply
tributor, as listed on the "Information" cord to share an outlet with an unrea-
page when: sonable number of other devices. Be
• The AC adaptor or the power-sup- especially careful when using exten-
ply cord has been damaged; or sion cords—the total power used by
• Objects have fallen into, or liquid all devices you have connected to the
has been spilled onto the unit; or extension cord's outlet must never
• The unit has been exposed to rain exceed the power rating (watts/
(or otherwise has become wet); or amperes) for the extension cord.
• The unit does not appear to oper- Excessive loads can cause the insula-
ate normally or exhibits a marked tion on the cord to heat up and even-
change in performance. tually melt through.
............................................................................... ...............................................................................
013 016
• In households with small children, an • Before using the unit in a foreign
adult should provide supervision country, consult with your retailer,
until the child is capable of following the nearest Roland Service Center, or
all the rules essential for the safe an authorized Roland distributor, as
operation of the unit. listed on the "Information" page.
............................................................................... ...............................................................................
31
019
• Batteries must never be recharged,
heated, taken apart, or thrown into 101b
fire or water. • The unit and the AC adaptor should
be located so their location or position
............................................................................... does not interfere with their proper
ventilation.
...............................................................................
102d
• Always grasp only the plug or the
body of the AC adaptor when plug-
ging into, or unplugging from, an out-
let or this unit.
...............................................................................
103b
• Whenever the unit is to remain
unused for an extended period of
time, disconnect the AC adaptor.
...............................................................................
104
• Try to prevent cords and cables from
becoming entangled. Also, all cords
and cables should be placed so they
are out of the reach of children.

32
106 111: Selection
• Never climb on top of, nor place • If used improperly, batteries may
heavy objects on the unit. explode or leak and cause damage or
............................................................................... injury. In the interest of safety, please
107d read and observe the following pre-
• Never handle the AC adaptor body, cautions (p. 23).
or its plugs, with wet hands when 1 • Carefully follow the installation
plugging into, or unplugging from, instructions for batteries, and make
sure you observe the correct polari-
an outlet or this unit.
ty.
............................................................................... 3 • Remove the batteries whenever the
108b
unit is to remain unused for an
• Before moving the unit, disconnect
extended period of time.
the AC adaptor and all cords coming 5 • If a battery has leaked, use a soft
from external devices. piece of cloth or paper towel to
............................................................................... wipe all remnants of the discharge
109b
from the battery compartment.
• Before cleaning the unit, turn off the Then install new batteries. To
power and unplug the AC adaptor avoid inflammation of the skin,
from the outlet (p. 13). make sure that none of the battery
............................................................................... discharge gets onto your hands or
110b skin. Exercise the utmost caution
• Whenever you suspect the possibility so that none of the discharge gets
of lightning in your area, disconnect near your eyes. Immediately rinse
the AC adaptor from the outlet. the affected area with running
............................................................................... water if any of the discharge has
entered the eyes.
33
6 • Never keep batteries together with
metallic objects such as ballpoint
pens, necklaces, hairpins, etc.
...............................................................................
112
• Used batteries must be disposed of in
compliance with whatever regula-
tions for their safe disposal that may
be observed in the region in which
you live.
...............................................................................

34
 For EU Countries

This product complies with the requirements of European Directive 89/336/EEC.

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.

For Canada

NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

35
 G601744103
36