Hydraulic Control Valves M3, M1 & MV Series

Contents
Company profile .................................................................................. 4

The Added Values of C-Valves’ technology ............................................. 5-6

Technology and materials................................................................................ 6

Principles of operation....................................................................................... 7

Operational features and benefits......................................................................... 8

Models M1, M3 and Multi-Valve.........................................................................9

Pressure Reducing valves ................................................................................ 10

Pressure and Flow Regulating Valves – Dynamic Pressure Management.... 11

Pressure Sustaining Valves / Pressure Relief Valves ..................................... 12

Surge Anticipating Valves ................................................................................. 13

Flow Control Valves ........................................................................................... 14

Booster Pump Control Valves ........................................................................... 15

Reservoir and Level Control Valves ..................................................................16-17

Burst Control Valve ............................................................................................ 19-20

Technical data......................................................................................................21-26

Dimensions & weights......................................................................................... 26

Pilots Table.......................................................................................................... 27

M1 exploded view............................................................................................. 28-29

M3 exploded view ............................................................................................ 30

3
Company Profile
C-Valves is about stable, efficient, robust, cost-effective water supply. Easy-to-implement. Easy to maintain.
Easy to measure. C-Valves delivers robust solutions at a fraction of the cost with immediate return on
investment in reduced eater loss, maintenance costs and energy costs.

C-Valves serves customers worldwide with innovative valve solutions that deliver dramatic improvements in water
supply stability. The bottom line for C-Valves is measured in reduced fluctuation of water supply, reduced
unaccounted for water, fewer bursts and reduced maintenance costs.

What We Do for Our Customers

C-Valves enables our customers to reduce procurement, installation and maintenance costs, to save water and
reduce energy consumption, and to stabilize water flow. The result: more efficient water systems, less non-
revenue water and lower system maintenance costs.

C-Valves Delivers Solutions

Fusing unique piston actuated, Linear Flow, Linear Control (LFLC) valve technology, with field expertise in the most
demanding environments, C-Valves provides unparalleled water supply solutions.

Waterworks and Water Treatment Plants

Leakage and burst reduction through dynamic pressure and flow management for both urban and rural
environments.

Desalination Plants
Corrosion proof C-Valves are naturally suited to control sea water, brackish water and brine. Very cost effective
compared to valves manufactured from expensive alloys.

Irrigation Systems
Accurate pressure control of long irrigation lines for agriculture, municipal gardening and commercial gardening.
Field proven success with effective flow management, simplicity of operation and very low maintenance costs.

Water-intensive Industrial/Manufacturing
For manufacturing processes that depended on steady, reliable pressure, C-Valves delivers simple, precise,
low-maintenance corrosion resistant solutions.

The C-Valves Mission

Established in 1995 with the mission to develop a valve technology that will eliminate the problems inherent in
conventional control valve systems ,C-Valves invested three years in research and development before bringing
the first product to market. C-Valves’ products are based on proprietary valve technology. With some of the best
minds in hydraulic engineering, and state of the art manufacturing and testing facilities, C-Valves continues to
invest to bring to market solutions for bringing measurable benefits to our customers: reduced fluctuation,
reduced non-revenue water, burst minimization and reduced maintenance costs.

C-Valves Worldwide
The C-Valves global network of distributors, licensed service centers, and alliance partnerships with leading
products and services providers, enable us to deliver global solutions with a local touch.

Continual “open door” communications with distributors, alliance partners and end users enable C-Valves to
continually deliver improved products and services that meet the pressing needs of our customers.

4
The Added Values of C-Valves’ Technology
C-Valves serves customers worldwide with innovative valve solutions that deliver dramatic improvements in
water supply stability. The bottom line for C-Valves is measured in reduced fluctuation of water supply, reduced
unaccounted for water, fewer bursts, and reduced maintenance costs.

Very low head loss, smooth flow, energy savings

The unique hydrodynamic structure of valves delivers a high flow factor and enables operation at very high flow
rates with low pressure losses compared to other control valves available on the market.
The C-Valves 4” valve has a KV value of 475 (Cv=555).
Note: The flow factor KV is the flow rate at full opening, expressed in m 3/hr, when a pressure drops of 1 bar is
registered.

Valve operates as normally closed (NC) or normally open (NO) valve

C-Valves piston actuated valves are available as Normally Closed (NC) or Normally Open (NO). The transition is
obtained by a simple modular change, with no need for hydraulic relays or external tubing.
• Choose Normally Closed when your main concern is avoiding bursts. The valve will fail-safe close – avoiding
damage to your infrastructure and to customers from excessive pressure.
• Choose Normally Open when your main concern is uninterrupted water supply. In the absence of water
pressure the valve will fail-safe open, allowing for full inlet pressure into the system.

Accurate and stable regulation for wide range of pressure and flow rates
C-Valves regulate pressure over wide range of flow rates, including near zero flows as well as static conditions. While
other valves actually introduce turbulence, C-Valve’s unique 3-way pilot and hydrodynamic structure enable linear
flow without need for a by-pass.
C-Valves are available as Fix-Ratio Pressure-Reducing valves, where outlet pressure = 0.62 of the inlet pressure.

Valve’s actuator enables operation event even at low pressure and vacuum conditions
A pair of pistons enables operation even when the inlet pressure is lower than the outlet pressure. The actuator
is double-chambered and bi-directional, independent of the pressure an flow direction. The control chambers are
isolated from the valve’s flow, enabling control by a different media (such as compressed gas or water).

High resistance to corrosion and cavitation

The structure and construction materials used in C-Valves provide higher resistance to corrosion and
cavitation than traditional valves.

Quick response maintains constant and stable pressure

Very rapid response to changing hydraulic conditions enable C-Valves to maintain constant and stable pressure.
Only 2-13 seconds for a full stroke of opening and closing are required for valve actuation (depending on the model
and the pressure). The process is smooth and nearly noiseless thanks to declining rate of closure towards the end
of the process, thereby preventing turbulent flows that create unacceptable noise level and violent shaking.
Opening and closing time can be prolonged at the customer’s request.
• Conventional valves initially open slowly (about 12-14 seconds) and then open rapidly toward the end of the
opening cycle, causing water surge in the system.
• C-Valves open to 90% very rapidly (in about two seconds) and save the next 10% for a slow opening (two more
seconds).
The results is surge minimization and much less turbulence in the water.

5
Surge restriction
The valve’s swift response (valve and 3-way pilot) affords special protection of the downstream supply by
depressing upstream surge pressure and relieving over pressures into the atmosphere in fractions of a second.

Robust symmetric construction for high pressure

Symmetric construction provides mutual support between the actuator housing and the valve body cylinder,
enabling production of plastic valves of a larger diameter and lower weight for higher pressures and tougher working
conditions than other valves available in the market.

Robust functioning for corrosive environments

Reinforced, high strength, engineered plastic materials enable the valves to function under corrosive
conditions.
High mechanical resistance for low maintenance costs
Symmetric structure and balance of forces means that C-Valves excel in low wear characteristics.
A replaceable sleeve with a very low friction factor protects the moving parts. Only a few inexpensive parts are required to
maintain full performance for long periods of service.

High pressure and large diameters models

C-Valves are available manufactured with metal casting, or stud bolts, giving the valve additional strength.
Since the casting does not come into contact with the flow, the chemical an corrosion resistance of the valve is
unaffected.

Control manifold
All feeding, control and sensing ports are integrated in the valve structure an internal ducts and are connected to a
special control manifold, which enables the replacement of the control system without dismantling the tubing.

Almost noise-free operation

Due to its hydrodynamic structure, valve operation is almost noiseless, even in extreme regulating conditions and is
far quitter than other control valves available on the market.

Technology and Materials

Fusing unique piston actuated, Linear Flow, Linear Control (LFLC) valve technology, with field expertise in the most
demanding environments, C-Valves provides unparalleled water supply solutions.

Proprietary Linear Flow, Linear Control (LFLC) technology enables use of piston valves with dual control chambers.
The piston is mounted in a special volute with control action parallel to the flow.
Linear flow control enables:
• Accurate and stable control from zero to very high flow rates.
• Very low pressure drop.
• Low noise.
• Negligible cavitation.
• “Soft closure” built into the valves eliminate water hammer.

The valves are manufactured from light-weight, durable,

Precision-molded Nylon 12 GR (50% glass fiber).
Specialty materials (stainless steels, polypropylene, polyethylene)
Are available to meet special fluid reqirements.

6
Principle of Operation
The driving force for the piston movement is derived from pressure applied to the opening or closing
surface areas of the piston. The driving force is usually taken from upstream. The pilot controls the
application by supplying or venting pressure, so moving the piston to open or close the valve.
The ratio of inner hydraulic surface area of the chamber versus the outside hydraulic surface area
causes the piston to move back and forth, thus controlling the flow.

M1 Control Valve-Normally Closed (NC)

The M1 valve is available as Normally Closed (NC).
Open Position
Internal fluid passages provide constant pressure to the closing chamber, on both
front & back piston, creating a constant closing force. Applying pressure to the opening
chamber, together with the upstream pressure applied to the actuator, creates a greater
thrust to overcome the closing force, thus opening the valve.
Closed Position
Venting the opening chamber releases the opening force, allowing the valve to close.
Modulating
Control is applied by either venting or supplying fluid to the open control chamber,
providing drive to adjust the actuator to the required position, thus maintaining the
preset parameter.

M1 Control Valve-Normally Closed (NC)

The M1 valve is available as Normally Open (NO).
Closed Position
Control pressure applied to the closing chamber, on both front & back piston, creates a
superior closing force overcoming upstream pressure applied to the actuator, thus closing the
valve.
Open Position
Venting the closing control chamber while upstream pressure is applied to the actuator creates
a force that opens the valve.
Modulating
Control is applied by either venting or supplying fluid to the closing control chamber, providing
drive which enable the actuator to adjust the required position, thus maintaining the preset
parameter.

M3 Control Valve-Normally Open (NO)

The M3 Linear Flow, Linear Control (LFLC) piston valve feature dual control chambers.
The piston is mounted in a special volute with control action parallel to the flow.
The M3 valve is manufactured from light-weight, durable, precision-molded Nylon 12 GR
(50% glass fiber).
Closed Position
Control pressure applied to the closing chamber, on both front & back piston, creates a
superior closing force overcoming upstream pressure applied to the actuator, thus closing
the valve.
Open Position
Venting the closing control chamber while upstream pressure is applied to the actuator
creates a force that opens the valve.
Modulating
Control is applied by either venting or supplying fluid to the closed control chamber,
providing a drive which enables the actuator to adjust to the required position, thus
maintaining the preset parameter.

7
Operational Features and Benefits
FEATURE BENEFIT
Rapid-action piston Fast opening/closing action protects line from pressure
surge damage, without the risk of water hammer
damage.
Fast opening or closing action facilitates stable and
accurate control of pressure, flow and level.
High Kv factor Low head loss at high flow rates reduces operation
costs and provides the ability to pressure manage
where inlet pressure falls below the set point.
High flow capacity Smaller diameter valves can be specified, reducing
procurement and installation costs.
Precision molded composite construction Composite materials mean strong, lightweight and
(Nylon12 + 50% glass fibre reinforced) corrosion proof surfaces, which resist cavitation
damage, thus increasing service life and reducing
operation & maintenance cost.
Modular design Easily serviced components reduce down-time and
maintenance costs. Valve function can be changed,
without installing a new valve.
Linear flow Low turbulence minimizes cavitation, allowing high flow
velocities with low noise and vibration.
Double-chambered piston actuation Drip-tight closure is ensured, even when command
pressure is lower than line pressure. Opening or closing
can be achieved using external source of pressure (air,
fluid, gas).
“Soft closure” feature Allows rapid shut-off, preventing water hammer.
Client-specified failure mode (NO or NC) Normally Closed valve - default is the closed position,
protecting the line, even if the control loop is damaged;
Normally Open - default is fully open, maintaining
downstream supply.
Various connections available Bolted couplings connect to all types of pipe-ends,
including: reducers, flanges (ISO-DIN, AS or ANSI),
or welded connections. Couplings are flexible, easily
removed and are tolerant to misalignment.
Multi-Valve modular configuration Full redundancy enabled. Individual valves can be
separately removed for maintenance or replacement.
Reduces downtime and maintenance costs & allows
maintenance work to be done without halting water flow.

8
Models M1 and M3
The M1/M3 Valve is hydrodinamically designed, linear flow, linear control piston valve.
Its unique design allows M1/M3 valves to maintain control over a wide range of
Flows with extremely low pressure drop. Their lightweight, modular construction
Makes M1/M3 valves easy to install and maintain. The M1/M3 is available in DN
50, 80, 100 and DN150 at operating pressure uo to 25 bars.

Multi-Valve
The Multi-Valve is a modular assembly comprised of between two and six M1-PN20 valves mounted on a
hydrodynamic manifold, enabling control high flow rates. A single control base plate and pilot control this assembly.
All C-Valves applications are available for use with the Multi-Valve configuration. Optional butterfly valves can be
installed as partitions, enabling redundancy for maintenance or faults repair without halting the water supply.
Due to their high flow performance, several Multi-Valves installed in parallel can handle very high flow rates.

Multi-Valve Characteristics
• Full redundancy for maintenance
• A modular system which can be assembled by sections
• Maximum water supply reliability
• Quick on-site installation
• Simple and easy maintenance
• Single control base plate
• Multi-directional ball valve and position indicator for each M1 valve
• Isolation valves for each M1 valve - optional
• Several Multi-Valves can be installed in parallel for increased flow capacity
• Modular

Available in four sizes: 8” (200mm), 10” (250mm), 12” (300mm) 16" (400mm)
Flange standards: PN25 or ASA-159, 300. Other standards on request.
Grooved connections and pipes for welding 8” (200) and 10” (250) connections.
Grooved isolation valves per M1 valve – optional.
All applications can be implemented by using the C-Valves base plate and C-Valves pilot.
Specify NC or NO function.

9
Main C-Valves’ Applications
Pressure-Reducing Valves
Water distribution systems are sensitive to differences in pressure throughout
the network. In order to achieve stable delivery pressure over the entire system,
pressure reducing valves (PRV) are employed to maintain pre- determined
pressure at designated locations, thereby creating dynamic balance and
reducing strain on the system components.

PRV - Pressure Reducing Valve

The PRV enables a set point to maintain a reduced downstream pressure that is
independent of upstream pressure or flow. This application is the most commonly
used control valve. C-Valves’ Pressure Reducing Valve is composed of a main
valve and an independent Control Assembly, consisting of a pilot, associated
tubing and 3-position selector.
The 3-way pilot controls the valve, reducing pressure in order to protect
downstream consumers' piping and equipment from excessive pressure.
Maintains stable, pre- set, downstream pressure regardless of upstream pressure
or flow fluctuations.

RF - Pressure Reducing Valve with Flow Rate Regulation

Maintains a pre-set downstream pressure while limiting the flow rate to the required value.

Applications
• Net work asset protection from high pressure
• Manage topographical pressure variations
• Manage leakage
• Reduce overuse by pressure reduction
Benefits
• Extend network life span
• Reduction in burst frequency
• Minimize input costs by managing losses
• Maximize asset life

10
Pressure and Flow Regulation - Dynamic Pressure Management
Water distribution systems are sensitive to differences in pressure throughout the network. In order to achieve stabl
delivery pressure over the entire system, pressure reducing valves (PRV) are employed to maintain pre-determine
pressure at designated locations, thereby creating dynamic balance and strain on the system components.

PFR Pressure Reducing Valve in Relation to Flow Rate

Modulates downstream pressure in relation to flow rate, independent of upstream
pressure, according to pre-set value.
The pressure-regulating valve is designed to reduce leakage by reducing the set
point when there is a decrease in consumption and to maintain sufficient pressure in
the line by increasing the set point when there is an increase in consumption.

ART - Automatic Regulator Tuning

A piston assembly is added to the pilot which can change the set point or alternate
between set points. This option is configured for both manual and electric control
signal (controller-activated 2 solenoids). The minimum/maximum set points can be
adjusted according to requirements, either remotely, or on-site. This option can be
added to all C-valves pilots.
Suitable for various applications, such as pressure reducing, pressure sustaining, flow
control and level control.

Fixed Ratio - Pressure Reducing Valves

RR Fixed Ratio Pressure Reducing Valve
Maintains a constant ratio (0.62 in M1 and 0.5 in M3) between upstream and
downstream pressures, regardless of upstream pressure or flow rate, the RR
Fixed Ratio PRV reduces pressure in order to protect downstream consumers'
piping and equipment from excessive pressure that could cause bursts & cavitation
on downhill system components.

Applications
• Protection for high DP regions
• Over-pressure protection
• Transition from higher pressure regional distribution lines to lower pressure higher pressure
municipal distribution lines to lower pressure lines to individual homes
• Higher to lower elevation zone
• Higher to lower floors of hi-rise buildings
Benefits
• Leakage reduction
• Extends network life span
• Reduction in burst frequency

11
Pressure Sustaining Valves and Pressure-Relief Valves
Pressure relief valves are used to protect pumps and water distribution
networks by relieving dangerous over-pressure levels (off-line installation).
Pressure sustaining maintains a minimum level of back-pressure to
prevent pump overload and line emptying (in-line installation).

PSV Pressure Sustaining Valve

Maintains constant and stable upstream pressure, regardless of
downstream pressure or flow rate.

QR Quick Relief Valve

Maintains the upstream pressure to ensure that pre-set value is not
exceeded. Immediately vents excess line pressure from the line.

SF Pressure Sustaining Valve with Flow Rate Limiting

Maintains Limits the upstream pressure from falling bellow a pre-set
values while limiting the flow from exceeding a pre-set value.

Applications
• Pressure zones control
• Ensures pump minimum flow PSV
• Ensures controlled pipeline filling
• Maintains operating pressure for pressure vessels when discharge is
to the atmosphere

Benefits
• Maintains stable line pressure
• Protects pump from return line pressure
• Protects against pump overload & cavitation
• Prevents pipeline emptying

12
Surge Anticipating Valves
Sudden shutoff of a pump can create a high-pressure surge on the line, due to the ensuing pressure drop in
the line. A high-pressure, high-speed surgewave of returning water can impact the closed pump check valve,
with potentially damaging effect. Surge Anticipating Valves eliminate this danger by immediately reacting to
pressure drops and opening before the return surge arrives, eliminating its impact on the system.

QS Surge Anticipating Control Valve

Protects the system from surges and water hammer damage by relieving the
water & pressure from the line (off-line installation) in the event of a sudden stop
in flow (for example: in the event of a power failure). Available in a fully hydraulic
configuration, or combined hydraulic and electric activation.

Applications
• Protection of long lines
• Protection of network, pumps, valves and accessories

Benefits
• Eliminates surge in all types of pumping systems
• Eliminates surge in all distribution networks: Municipal, high-rise buildings,
wastewater lines

13
Flow Control Valves
Flow Control Valves protect the network & accessories from damage due to excessive flow. Excessive flow in
a system that exceeds the designed range can disrupt water supply and damage network facilities. Suitable for
systems that require constant flow rates.

FV Flow Valve
Maintains constant pre-set flow rate regardless of upstream/downstream
pressure. Valve opens fully when the flow rate falls below the set point.

Model M1/M3
The M1/M3 Valve is a hydrodynamically designed, linear flow, linear control
piston valve.
Its unique design allows M1/M3 valves to maintain control over a wide range
of flows with an extremely low pressure drop. Their lightweight, modular
construction makes M1/M3 valves easy to install and to maintain. The M1/M3 is
available in DN 50, 80, 100 and DN 150 & at operating pressures up to 25 bars.

C-Valves Multi-Valve
The Multi-Valve is a modular assembly, comprised of between 2 - 6 M1 valves
or 2 x M3 valves mounted on a hydrodynamic manifold. A single base plate and
pilot control the entire assembly. An additional advantage of the Multi-Valve
configuration is provided by optional butterfly valves, installed as partitions. This
enables redundancy for maintenance or faults repair during on-going operation,
as well as maintenance without halting the water supply. Due to their high flow
profile, several Multi-Valves can be installed in parallel to handle very high flow
rates.

Applications
• Controlling pressure flow conditions
• Ensuring efficiency of biological & other treatment plants

Benefits
• Control networks' flow
• Limits over-demand at set times

14
Booster Pump Control Valves
Installed on the pump discharge, this valve prevents surges by opening slowly when activated.
During shut-down, the valve closes slowly, until the position indicator limit switch stops the pump.

BS Pressure Sustaining-Pump Valve (Booster)

Maintains minimum pressure at the pump discharge. This prevents the pump from
operating at low pressure during filling of the line. When supply voltage is cut, the
valve closes immediately to prevent return flows or when the pump is stopped the
valve closes softly to prevent backflow.

BV Booster Valve
This valve is installed on the pump discharge. By opening slowly upon activation,
surges are prevented. During shut-down, the valve closes slowly, until the position
indicator limit switch stops the pump. This valve is an active Non-Return valve.

Model M1/M3
The M1/M3 Valve is a hydrodynamically designed, linear flow, linear control piston
valve.
Its unique design allows M1/M3 valves to maintain control over a wide range of
flows with an extremely low pressure drop. Their lightweight, modular construction
makes M1/M3 valves easy to install and to maintain. The M1/M3 is available in DN
50, 80, 100 and DN 150 & at operating pressures up to 25 bars.

C-Valves Multi-Valve
The Multi-Valve is a modular assembly, comprised of between 2 - 6 M1 valves
or 2 x M3 valves mounted on a hydrodynamic manifold. A single base plate and
pilot control the entire assembly. An additional advantage of the Multi-Valve
configuration is provided by optional butterfly valves, installed as partitions. This
enables redundancy for maintenance or faults repair during on-going operation, as
well as maintenance without halting the water supply. Due to their high flow profile,
several Multi-Valves can be installed in parallel to handle very high flow rates.

Applications
• Protects lines & pumps from surges or extreme operating conditions
• Pump start-and-stop in varied combinations

15
Reservoir & Level Control Valves
Modern water distribution networks depend on quick-reacting and highly
accurate electronically-controlled valves. These valves provide operators with the
ability to control the network parameters in real-time, using valves as individual
components, or in mutually dependent control applications.

A valve that is installed at the inlet or outlet of a reservoir & provides accurate
control of the required pre-set levels. Easy to install and maintain, these valves
provide accurate control without the installation and maintain, issues that are
common with mechanical float valves.

AV Altitude (Level Pressure) Valve

Maintains a constant level in the pool/reservoir/tank. The valve is located on the
filling or emptying line, eliminating the need to install reservoir accessories.
The valve is controlled by a sensitive 3-way pilot.

SV Pressure Sustaining-Float Valve (Two Level)

Maintains upstream pressure while filling or emptying a pool/reservoir/tank.

VH 3-way Hydraulic Pool Valve (Two Level)

Maintains the level in the pool / reservoir / tank within a pre-set range. The valve
is located on the filling or emptying line and is controlled by a 3-way or 4-ways
float valve. The valve is available with a four-way
float valve and can be fitted with a "soft closure" function to eliminate water
hammer.

Applications
• Filling or empting a reservoir
• For lines with low supply-pressure
• Distribution directing lines

Benefits
• Quiet & smooth operation
• Reduces energy consumption

16
Three-way Hydraulic Pool Valve
VF Two-way Hydraulic Pool Valve
Maintains a constant level in the pool/reservoir/tank. The valve is located on the filling or emptying line and
is controlled by a 2way float valve.

Pool Valve with Electric Control (EF) (Two Level)

FW – Four way hydraulic pool valve

Maintains pool level within the required range – the valve is located either at the filling or emptying line.

Model M1/M3
The M1/M3 Valve is a hydrodynamically designed, linear flow, linear control piston valve.
Its unique design allows M1/M3 valves to maintain control over a wide range of flows with an extremely low
pressure drop. Their lightweight, modular construction makes M1/M3 valves easy to install and to maintain.
The M1/M3 is available in DN 50, 80, 100 and DN 150 & at operating pressures up to 25 bars.

C-Valves Multi-Valve
The Multi-Valve is a modular assembly, comprised of between 2 - 6 M1 valves or 2 x M3 valves mounted on
a hydrodynamic manifold. A single base plate and pilot control the entire assembly. An additional advantage
of the Multi-Valve configuration is provided by optional butterfly valves, installed as partitions. This enables
redundancy for maintenance or faults repair during on-going operation, as well as maintenance without
halting the water supply. Due to their high flow profile, several Multi-Valves can be installed in parallel to
handle very high flow rates.

Applications
• Re-circulating & refreshing of reservoirs
• Filling up a reservoir
• For lines with low supply-pressure
• Distribution directing lines

Benefits
• Preventing reservoir overflow
• Optimizing water level management
• Quiet & smooth operation
• Reduces energy consumption

17
Security Valve
A terrorist mega-attack on closed water reservoirs might include sabotage of the reservoir control valves to force
them to remain open. Although the security system may give an alarm and send a closing signal to the valve, the
contaminated water would continue to flow to unsuspecting customers. Water poisoning could lead to unprecedented
disaster.

The security valve will prevent contaminated water from entering the network, averting the potentially devastating
results of such an attack (death and illness), as well as a major cleanup operation.

The system is comprised of a single M1 Valve or a Multi-Valve assembly consisting of between one and six M1
valves, mounted on a hydrodynamic manifold. The number of valves in a Multi-Valve assembly is determined by the
system requirements: maximum flow rates and permitted head-losses.
Closing of the valve is effected by in-line pressure, one of the unique qualities of C-Valves’ N.C. valve. The closing
motion is aided by a spring, allowing closure even when there is no pressure in the line.

Accumulator Pressure Tank - Supplies pressure to open the valve and allows full opening even when there is no
pressure in the line.

Control Cabinet - The electric valve that operates the M1 valve and its electronic operation system are located
within a secured and locked stainless steel box, so that any attempted sabotage or vandalism will automatically
close the valve. The connection to the system control module is elctrical wires that, when disconnected, will cause
the valve to close, with no possibility of bypass.

Position Indicator – Indicates the valve opening percentage and transmits a signal to the control system when the
valve is closed.

Operating Pressure Range: 0.5 - 25 bar.

Opening:
Enabled by the accumulator pressure tank. The tank is equipped with a pressure switch that warns when pressure
drops below the set point, allowing sufficient time to replace the tank.
If the line pressure is higher than 3 bars, the line pressure will fully open the valve (without using the tank supply).

Closing:
The valve closes at any pressure (including zero pressure) and does not require the use of external pressure.
The valve is an NC type that comes with a “failsafe to close” feature that guarantees valve closure in the event of
failure.
The valve is double chambered, enabling opening by an external pressure source, and can be closed regardless of
the reservoir level.
The valve actuator is located at the center of the valve, surrounded by the water flow, and cannot be accessed
from the outside (in contrast to other valves, where the actuator is located outside the valve body and the operation
chambers are exposed to bypass attempts).

18
Opening and closing response times
Valve opening and closing times are within the range of 2.5 – 10 seconds, depending on the line pressure and the
diameter of the valve.

Maximum flow rate under protracted working conditions

Single M1 valve – 550 m3/h
8” Multi-Valve – 1000 m3/h
12” Multi-Valve – 2000 m3/h
16” Multi-Valve – 3000 m3/h

Characterized closing
The valve is characterized by a slowed rate of closing towards the end of the closing action, thus minimizing water
surge phenomena.

Operating temperature range

The fluid operating temperature in the line is 4oC – 60oC.

Benefits
• Prevent contaminated water from entering the water network
• Protect population from hostile threats to drinking water sources
• Prevent major cleanup operation

19
Burst Control Valve
Water systems are vulnerable to bursts, whether due to hydraulic conditions, topography or external mechanical
damage. Burst Control Valves isolate the damaged zone until manually reset, minimizing water wastage, and other
possible damages.

HF Burst Valve
Valve shuts off when the flow rate exceeds a pre-set value, for example,
because of a burst line. The valve can only be re-opened by manual
activation.

Model M1/M3
The M1/M3 Valve is a hydrodynamically designed, linear flow, linear control
piston valve.
Its unique design allows M1/M3 valves to maintain control over a wide
range of flows with an extremely low pressure drop. Their lightweight,
modular construction makes M1/M3 valves easy to install and to maintain.
The M1/M3 is available in DN 50, 80, 100 and DN 150 & at operating
pressures up to 25 bars.

C-Valves Multi-Valve
The Multi-Valve is a modular assembly, comprised of between 2 - 6 M1
valves or 2 x M3 valves mounted on a hydrodynamic manifold. A single
base plate and pilot control the entire assembly. An additional advantage of the Multi-Valve configuration is
provided by optional butterfly valves, installed as partitions. This enables redundancy for maintenance or faults
repair during on-going operation, as well as maintenance without halting the water supply. Due to their high flow
profile, several Multi-Valves can be installed in parallel to handle very high flow rates.

Applications
• Zone shut-off
• High risk networks - high leakage networks
• Reservoir outlets in earthquake risk areas

Benefits
Protects networks with mechanical weaknesses •

20
Technical Data
M1 Series:
DN100 – DN150
DN200 – DN400 in a Multi-valve application – a manifold with two, three, four or six valves controlled by one pilot.
M1 Adjustable inlets and outlets for different pipe diameters with various connections to line.
M3 Series:
DN50 – DN80
DN80 – in a Multi-valve application – a manifold with two units controlled by one pilot.
M3 Adjustable inlets and outlets for different pipe diameters with various connections to line.

Materials:
Part Material

M-1 M-3
Valve bodies, pistons, Reinforced fiberglass nylon or Polypropylene Reinforced fiberglass nylon
bushings, front and rear cups or Polypropylene
Main seal NBR, VITON or EPDM rubber, Shore index: NBR, VITON or EPDM
80 rubber, Shore index: 80
O-rings NBR or EPDM rubber, Shore index: 70 NBR or EPDM rubber, Shore
index: 70
Inlets, outlets Stainless steel 316 Reinforced fiberglass nylon
Inlets, outlets Stainless steel 316 Reinforced fiberglass nylon
Clamps, bolts Stainless steel Stainless steel 316
Metal envelope (for high Spheroid iron with polyester or epoxy N/A
pressure) coating or stainless steel 316
Multi-Valve manifolds Spheroid iron with polyester or epoxy Spheroid iron with polyester
coating or stainless steel 316 or epoxy coating
• Can be supplied with different structural materials for various applications, Polypropylene products are in stock.

M1 Operating Pressure Range:

PN Model Max pressure
PN 16 Plastic model with clamps 16 bars
PN 20 Plastic model with stud bolts 20 bars
PN 25 Plastic model with metal casing 25 bars
PN 30 Plastic model with metal casing and stud bolts 30 bars

M3 Operating Pressure Range:

PN Model Max pressure
PN 25 Plastic model with clamps 25 bars
Minimum required pressure for operation – 1.2 bars. •

21
M1 Opening / Closing Parameters Minimum (meters):
M1 - Minimal Opening & Closing Pressure
Model Closing (meters) Opening (meters) Full Opening (meters)
NO 6 2 3
NO with spring 5 2 6
NC 14 2 7
NC with spring 3 3 20

Notes
If downstream pressure is lower than 20 meters and in cases of very high flow rates, please consult with C-Valves
applications department.
The closing pressure can be reduced at the expense of the opening pressure.
M3 Opening Parameters Minimum (meters):
M3 - Minimal Opening & Closing Pressure
Model Closing (meters) Opening (meters) Full Opening (meters)
NO 10 4 7

Booster Pressure:
NO model also closes when the control pressure is 85% of line pressure.
NC model also opens fully when the control pressure is 80% of the line pressure (opening begins at 25%).

Temperature Range: Operating temperatures from 4oC – 60oC.

C-Valves Head Loss Chart

BAR KV=2500KV=1210
KV=90 KV=1570KV=435 KV=850
1.00

0.50
0.40
0.30
0.20

0.10
0.05
0.04
0.03

0.01
10 2000 30001000 200 300 400 500100 30 40 5020 5000 1000

-------M3 ------- M1------- DN-200 ------- DN-250 ------- DN-300 ------- DN-400

22
Operation Parameters
On-Off Valves:
• M3 DN50 is designed to operate from 0 to 80 m3/h, Kv= 90
• M3 DN80 is designed to operate from 0 to 120 m3/h, Kv=90
• M1 DN100 is designed to operate from 0 to 250 m3/h, Kv=435
• M1 DN150 is designed to operate from 0 to 550 m3/h, Kv=435
• DN200 Multi-Valve (2 M1 PN20 valves) is designed to operate from 0 to 1000 m3/h. Kv=850
• DN250 Multi-Valve (3 M1 valves, or less) is designed operate from 0 to 1500 m3/h, Kv=1210
• DN300 Multi-Valve (4 M1 valves, or less) is designed operate from 0 to 2000 m3/h. Kv=1570
• DN400 Multi-Valve (6 M1 valves or less) is designed for operating from 0 to 3000 m3/h. Kv=2500
Regulating Valves (Pressure Reducing, Pressure Sustaining, Flow Regulator):
Use the sizing chart for the required valve size:

23
22
21
LOW FLOW
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
500 450 400 350 300 250 200 1 50 1 00 50 0

Fl ow ( M 3 / h

12

11
HIGH FLOW
10

1
3000 2900 2800 2700 2600 2500 2400 2300 2200 21 00 2000 1 900 1 800 1 700 1 600 1 500 1 400 1 300 1 200 1 1 00 1 000 900 800 700 600 500

Fl ow ( M 3 / h)

M 2-DN50 M 2-DN80 M 1 -DN1 00 M 1 -DN1 50 M V 1 -DN200 M V 1 -DN250 M V 1 -DN300 M V 1 -DN400

23
Quick Relief and Surge Anticipating Valves (designed to operate for several seconds, several times a day):
The discharge flow rate is dependent on the pressure difference on the valve. Maximum recommended flow rates
are listed bellow:

Valve Diameter Discharge

(mm) (m3/h)
M3 50 120
M3 80 220
M1 100 400
M1 150 700
MV 200 1000
MV 250 1600
MV 300 2200
MV 400 3500

M1 - Opening and Closing Duration Time (Full Stroke)

Model Pressure Time (seconds)

(meters)
NC 20 opening closing
8.6 5.6
NC 50 5.3 3.7
NC 100 3.9 2.7
NC 200 2.8 1.8

NO 20 8.5 9.6
NO 50 5.7 6.3
NO 100 4.3 4.5
NO 200 3.2 3.3

M3 - Opening and Closing Duration Time (Full Stroke)

Model Pressure Time (seconds)
(meters)
NO 20 opening closing
2.8 3.7
NO 50 1.6 2.0
NO 100 1.1 1.4
NO 150 0.95 1.1
NO 200 0.8 1.0

24
Opening/closing time can be extended. Flow also has an effect (marginal) on the opening/closing time.

Characteristic Curve of closure

100
90
80
70
Opening %

60
50
40
30
20
10
0
5 4 3 2 1 6 7 8 9 10
Time (seconds)
Volume of Control Chamber M1 / M3:

Model M1 Liters Model M3 Liters

NC 0.24 NO 0.12
NO 0.51 - -

Dimensions and Weight

Length may change. Please check with C-Valves applications department before preparing the site for installation.
Stainless steel QC Couplings are available per request.
Stainless steel bolts and nuts for cast iron QC couplings are available per request.
M3 (Grooved connection PN25)
Valve diameter (mm) 50 mm 50 mm 80 mm 80 mm
with with
base base
plate plate
Valve PN (bars) 25 25 25 25
Length (mm) 205 251 375 395
Width (mm) 160 270 160 270
Weight of grooved valve (kg) 2.332 7.260 1.884 6.870
M1 (Grooved connection PN16/20/25)
Valve diameter (mm) 100 100 100 150 150 150
Valve PN (bars) 16 20 25 16 20 25
Length (mm) 375 374 375 395 396 396
Width (mm) 227 227 227 227 227 227
Weight of grooved valve (kg) 13 13 15.6 17.9 18.7 20

25
 Valves with Flange Adaptors ST91 (conforms to ISO 7005-1 PN-10/16/25, ASA-125/150)
Standard flange Adapter

Valve diameter (mm) 100 150

Line Diameter (mm) 100 150
Length (mm) 580 600
Width (mm) 227 227
Weight (kg), (PN 16 models) 14.6 28

(Conforms to ISO 7005-1 PN-10/16/25,ASA-125/150)

Multi-valves
PN-10/16 & ASA-125/150 Assembled from M1 PN20 valves and QC ST75
Valve diameter (mm) 200 200 200 200 250 250 250 250 300 300 400 400
Connection to line * G G F F G G F F F F F F
Two Butterfly isolation valves No Yes No Yes No Yes No Yes No Yes No Yes
PN16
Length (mm) tolerance +5mm 911 1227 910 1206 911 1205 956 1221 1201 1497
Width (mm) 400 460 400 460 561 570 659 660 984 984
Height (mm) 530 530 530 530 630 630 615 650 920 871
Weight (kg) 110 166 100 156 143 227 194 306 365 533
* G – Groove / F - Flange
(Conforms to ISO 7005-1 PN-10/16/25,ASA-125/150)

Parallel
C-Parallel – Two PRVs in parallel & B-Parallel – One PRV and By-Pass

Valve diameter (mm) 80 80 100 100 150 150

Line Diameter (mm) 100 100 150 150 200 200
Connection to line G F G F G F
Length (mm) tolerance +5mm 750 1035 924 1220
Width (mm) 350 460 460 460
Height (mm) 460 610 580 580
C-Parallel weight (kg) 50 99 107
B-Parallel weight (kg) 38 76 143

The Parallel configurations are also available for other applications. •

26
Table of pilots according to application and valve type:

Application / Valve type M 1 NO M 1 NC M3

Pressure Reducing B A B3
Pressure Sustaining A B A
Flow Control, Burst Valve D D D
Altitude Valve n/a E n/a
Hydraulic Surge Anticipator A+B A+B A+B
Electric Surge Anticipator A+SOL B+SOL A+SOL

ART - for Controller F F F

2 Pressure or Flow levels F+SOL F+SOL F+SOL

Pressure / Flow Regulator - PFR G G G

Relay pilot – Non-Return / Bi-Directional H H H

Pressure / Flow Regulator PFR with I I I

enhanced sensing
Change of the regulated value with low I I I
analog pressure
Pressure-Reducing / Sustaining A+B A+B A+B3

Pressure-Reducing / Flow control B+D A+D B+D

Pressure-Sustaining / Flow Control A+D B+D A+D

Restraining pilot (two-way) T T N/O

Pilot “D” N.O Pilot “I” ART Pilot

(Modulo)

27
M1 NC exploded view

28
M1 NO exploded view
Inlet

Front Cone Sleeve

29
 M3 exploded view

Inlet

Front Closure
Front Closure Screw
Main Seal

Front Piston

Back Piston Cover

Back Piston

Clamp

Body

30