N300 Wif Range Extender: Model E X2700 User Manual

N300 WiF Range Extender
Model E X2700
User Manual
June 2018
202-11395-04
350 East Plumeria Drive

San Jose, CA 95134
USA
Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help,
access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR
support resources.
Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are
used for reference purposes only.
2
Table of Contents
Chapter 1 Overview
Meet Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
When to Use Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How the Extender Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter 2 Get Started

Use the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Place the Extender and Apply Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connect to an Existing WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connect an Ethernet-Enabled Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Log In to the Extender After Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Run Smart Setup Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Chapter 3 Extender Network Settings

View Connected Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
View WiFi Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Change the WiFi Network Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Turn Off the SSID Broadcast to Create a Hidden Network . . . . . . . . . . . . . . . . . 18
Disable or Enable the WiFi Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Change the WiFi Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Customize the Extender’s WiFi Coverage Area. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Use WPS to Add a Computer to the Extender’s WiFi Network. . . . . . . . . . . . . . 22
Use WPS With the Push Button Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Use WPS With the PIN Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Deny Access to a Computer or WiFi Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Set Up an Access Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Set Up the Extender to Use a Static IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Use the Extender With MAC Filtering or Access Control. . . . . . . . . . . . . . . . . . . 27
Chapter 4 Maintain and Monitor the Extender

Change the Extender User Name and Password. . . . . . . . . . . . . . . . . . . . . . . . . . 30
Turn Password Protection Off and On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Recover a Forgotten User Name or Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Automatically Adjust for Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Manually Set the Extender Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Back Up and Manage the Extender Configuration . . . . . . . . . . . . . . . . . . . . . . . . 33
Back Up the Configuration Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3
Restore the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Return the Extender to Its Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . 34
Update the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Restart the Extender Remotely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Chapter 5 FAQs and Troubleshooting

FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Cannot Connect to the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Cannot Join a WiFi Network and Receive an Error Message . . . . . . . . . . . . . . . . 41
Appendix A Supplemental Information

Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4
1. Overview
1
The WiFi Range Extender boosts your existing network range and speed.
This chapter covers the following topics:
• Meet Your Extender
• When to Use Your Extender
• How the Extender Works
Note: For more information about the topics covered in this manual, visit the
support website at support.netgear.com.
Note: Firmware updates with new features and bug fixes are made
available from time to time on downloadcenter.netgear.com. Some
products can regularly check the site and download new firmware, or
you can check for and download new firmware manually.
5
Meet Your Extender

Before you install your extender, familiarize yourself with its LEDs, buttons, and port.
Front Panel
Router Device
Link Link
LED LED
Power LED
WPS LED
Power On/Off
button
WPS button
Factory Reset Ethernet port
button
Figure 1. Front panel
The following table describes the LEDs.

Table 1. Front panel LEDs
LED Description
This LED indicates the connection between the extender and the router or
access point:
Router Link
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
Device Link This LED indicates the connection between the extender and a computer or WiFi
device:
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
Overview
6
Table 1. Front panel LEDs (continued)
LED Description
Power • Solid amber. The extender is booting.

• Solid green. The extender is powered on.
• Off. The extender is powered off.
WPS • Solid green. WiFi security is enabled (WPA or WPA2).

• Blinking green. A WPS connection is being established.
• Off. WiFi security is not enabled.
When to Use Your Extender

We recommend that you connect through the extender network only when the WiFi device is
in a “dead zone” where connection from the existing network is poor or nonexistent. Data
traffic routed through the extender is inherently slower than traffic routed directly from the
network.
How the Extender Works

The extender works like a bridge between a WiFi router (or a WiFi access point) and a WiFi
device outside the range of the WiFi router. The extender performs two main jobs:
• The extender connects to a working WiFi network.
When the extender connects over WiFi to an existing network, it functions as a network
client, similar to how a WiFi device connects to a network.
• The extender acts as an access point for WiFi devices.
The extender broadcasts its own WiFi network that WiFi devices can join. In its role as an
access point, the extender performs tasks that WiFi routers do, such as broadcasting its
network name (SSID).
The extender must do each of these jobs so that both ends of the bridge are in place.
WiFi Range Extender

Boosts the range of Existing WiFi
your existing WiFi Sometimes your
and creates a router does not
stronger signal in provide the WiFi
hard-to-reach areas. coverage that you
need.
Figure 2. Range extender in a home
Overview
7
2. Get Started
2
• Use the Extender
• Log In to the Extender After Installation
• Run Smart Setup Installation
8
Use the Extender

The extender repeats the signals from an existing WiFi router or access point. Place the
extender, apply power, and connect it to your WiFi network.
Place the Extender and Apply Power

 To place the extender and apply power:
1. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
2. Plug the extender into an electrical outlet.
3. Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button on the side of the
extender.
Connect to an Existing WiFi Network

To extend the range of your WiFi network, you must connect the extender to your existing
WiFi network. You can do this in one of two ways:
• Connect with WPS. For more information, see Connect With WPS on page 9.
• Connect with web browser setup. For more information, see Connect With Web
Browser Setup on page 10.
Connect With WPS

Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network
name and password.
Note: WPS does not support WEP network security. If you are using WEP
security, follow the instructions in Connect With Web Browser Setup
on page 10.
 To use WPS to connect the extender to your WiFi router:

1. Press the WPS button on the side panel of the extender.
The WPS LED blinks.
2. Within two minutes, press the WPS button on your router or access point.
The WPS LED on the extender lights solid green, the Router Link LED lights, and the
extender connects to your existing WiFi network.
Get Started
9
If the Router Link LED does not light, try again. If it still does not light, see Connect With
Web Browser Setup on page 10.
3. Find the new extender network name on your computer or WiFi device.
The extender creates two new extended WiFi networks. The extender’s new WiFi
network name is based on your existing WiFi network name, with _EXT at the end of the
name.
For example:
• Existing WiFi network name. MyNetworkName
• New extended network name. MyNetworkName_EXT
4. Connect your computer or WiFi devices to the new extended WiFi network.
Use the same WiFi password that you use for your WiFi router.
5. Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
6. Plug the extender into an electrical outlet.
7. Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button on the side of the
extender.
8. Use the Router Link LED on the front panel to help you choose a spot where the
extender-to-router connection is optimal.
Connect With Web Browser Setup

You can use a web browser to log in to the extender and set up its WiFi connection to your
existing WiFi router.
 To use a web browser to connect the extender to your WiFi router:

1. Use a WiFi network manager on a computer or WiFi device to find and connect to the
extender WiFi network NETGEAR_EXT.
After the connection with the computer or WiFi device is established, the Device Link LED
lights.
2. Launch web browser.
3. Enter www.mywifiext.net in the address field of the browser.
The New Extender Setup page displays.
Get Started
10
4. Click the NEW EXTENDER SETUP button.
The first time that you log in to the extender, the Create Account page displays. If the
Create Account page does not display, visit www.mywifiext.net.
5. Complete the fields and click the NEXT button.
6. Select a WiFi network to extend and click the NEXT button.

7. In the Password (Network Key) field, type the existing WiFi network password (also called
passphrase or security key) and click the NEXT button.
8. Set the network name (SSID) and password for your new extender WiFi network and click
the NEXT button.
Wait for the page to display a list of available extended WiFi networks, which might take
up to one minute.
9. Connect the computer or WiFi device to the new extended WiFi network using the extender
SSID and password that you created in Step 8.
Note: To connect additional devices, repeat Step 9.
10. Make sure that your computer or WiFi device is connected before you click the Continue
button.
11. Click the Continue button.
Get Started
11
A message displays confirming that the extender is connected and ready.

12. Click the Next button.
The registration page displays.
13. Complete the registration fields and click the Finish button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.
14. Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
15. Plug the extender into an electrical outlet and wait for the Power LED to light green.
If the Power LED does not light, press the Power On/Off button.
16. Use the Router Link LED to help you choose a spot where the extender-to-router connection
is optimal.
17. If the Router Link LED doesn’t light amber or green, plug the extender into an outlet closer
to the router and try again.
Keep moving the extender to outlets closer to the router until the Router Link LED lights
amber or green.
18. Reconnect your computer or WiFi device to the new extended WiFi network.
19. Test the extended WiFi range by moving your computer or WiFi device to the area with a
poor router WiFi signal:
a. Leave your computer or WiFi device in the area with a poor router WiFi signal and
return to the extender.
b. Check the Device Link LED on the extender:
• If the Device Link LED is solid green or amber, your extended WiFi network
reaches the area with a poor router WiFi signal and your network setup is
complete.
• If the Device Link LED is red, your extended WiFi network does not reach the area
with a poor router WiFi signal.
You must move the computer or WiFi device closer to the extender until the
Device Link LED turns solid green or amber.
Get Started
12
Connect an Ethernet-Enabled Device

After the extender is connected to your existing WiFi network, you can connect a wired
device to the extender using an Ethernet cable. The device can then access your existing
network through the extender’s WiFi connection.
Extender
WiFi router
Figure 3. You can connect a device to the extender’s Ethernet port
Log In to the Extender After Installation

After installation, you can log in to the extender to view or change the extender’s settings.
 To log in to the extender:

new extended WiFi network.
lights solid green.
2. Launch a web browser.
A login window opens.
4. Enter your email address and password and click the LOG IN button.
Get Started
13
Run Smart Setup Installation

You can use Smart Setup to change the extender settings. This is an easy way to connect the
extender to a different router or to change the extender WiFi network name (SSID) or WiFi
password.
 To run Smart Setup:

new extended WiFi network.
lights solid green.
4. Enter your email address and password and click the LOG IN button.
5. Click the SMART SETUP button.
The extender scans for WiFi signals and finds the WiFi networks in your area and
displays a list.
6. Select your WiFi network and click the NEXT button.
7. When prompted, enter the password to connect to your WiFi network and click the NEXT
button.
A message displays when the extender connects to your existing router’s WiFi network.
8. Click the NEXT button.
The extender applies your settings to its WiFi network names and WiFi passwords.
During this change, the extender disconnects you from its WiFi network.
9. When prompted, connect your WiFi devices to the extender WiFi network and click the
CONTINUE button.
The registration page displays.
10. Complete the registration fields and click the FINISH button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
Get Started
14
3. Extender Network Settings
3
• View Connected Devices
• View WiFi Settings
• Change the WiFi Network Name
• Turn Off the SSID Broadcast to Create a Hidden Network
• Disable or Enable the WiFi Radio
• Change the WiFi Speed
• Customize the Extender’s WiFi Coverage Area
• Use WPS to Add a Computer to the Extender’s WiFi Network
• Deny Access to a Computer or WiFi Device
• Set Up an Access Schedule
• Set Up the Extender to Use a Static IP Address
• Use the Extender With MAC Filtering or Access Control
15
View Connected Devices

You can view a list of devices that are connected to the extender network.
 To view connected devices:

1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
4. If your browser displays the Menu icon , click it.

The extender menu displays.
5. Select Settings > Connected Devices.
View WiFi Settings

 To view the WiFi settings:
browser.

Extender Network Settings

16
5. Select Settings > WiFi.
Change the WiFi Network Name

 To change the WiFi network name:
browser.


17
6. In the Network Name (SSID) field, type a network name.

7. Click the SAVE button.
Your settings are saved.
Turn Off the SSID Broadcast to Create a Hidden Network

By default, the extender broadcasts its WiFi signal so that its WiFi network name (SSID) is
easy for you to find and connect to from your computer, tablet, or smartphone. You can turn
off the SSID broadcast to create a hidden WiFi network. To connect to a hidden network you
must know its SSID and password and manually enter them.
 To turn off the SSID broadcast to create a hidden network:

browser.


18
6. Clear the Broadcast the Network name (SSID) check box.

Disable or Enable the WiFi Radio

By default, the extender’s WiFi radio broadcasts signals in the 2.4 GHz band. If you disable
the WiFi radios, then no one can connect with WiFi to the extender.
 To disable or enable the WiFi radio:

browser.


19
6. Select or clear the Enable 2.4 GHz WiFi check box.

Change the WiFi Speed

 To change the WiFi speed:
browser.


20
6. In the WiFi Speed menu, select a speed.

Customize the Extender’s WiFi Coverage Area

By default, the extender uses its maximum WiFi coverage area. You can select a smaller
coverage area, which uses less electrical power.
 To customize the extender’s WiFi coverage area:

browser.


21
5. Select Do More > WiFi Coverage.
6. Select a radio button for the output power.

Use WPS to Add a Computer to the Extender’s WiFi

Network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s
network without entering the WiFi network passphrase or key. Instead, you use a WPS button
or enter a PIN to connect.
If you use the button method, the WiFi device that you are trying to connect must include a
physical push button or a software button. If you use the PIN method, you must know the PIN
of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on the
extender network and generates a random passphrase. You can view this passphrase on the
WiFi Settings page (for more information, see View WiFi Settings on page 16).
For information about using WPS to connect the extender to a WiFi network during setup,
see Use WPS to Add a Computer to the Extender’s WiFi Network on page 22.
Use WPS With the Push Button Method

For you to use the push button method to connect a WiFi device to the extender’s WiFi
network, the WiFi device that you are trying to connect must include a physical WPS button
or an onscreen WPS button that you can click.
 To use WPS to add a computer or WiFi device to the extender’s WiFi network:
browser.

22


5. Select Settings > Do More > Connect Devices (WPS).
6. Leave the Push Button (recommended) radio button selected.

7. Click the WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the computer or WiFi device to its WiFi
network.
8. Within two minutes, go to the computer or WiFi device and press or click its WPS button.
9. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
Use WPS With the PIN Method

To use the PIN method to connect a WiFi device to the extender’s WiFi network, you must
know the PIN of the WiFi device that you are trying to connect.
 To add a computer or WiFi device to the extender’s WiFi network:

browser.

5. Select Settings > Do More > Connect Devices (WPS).

23
The Connect Devices (WPS) page displays.

6. Select the PIN Number radio button.
7. Type the PIN of the WiFi device in the field.

For four minutes, the extender attempts to find the computer or WiFi device.
9. Within four minutes, go to the WiFi device and use its WPS software to join the WiFi
network.
10. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
Deny Access to a Computer or WiFi Device

By default, access control is disabled so that it is easy for you to connect to the extender’s
WiFi networks.
You can deny network access to specific computers and WiFi devices based on their MAC
addresses. Each network device is assigned a MAC address, which is a unique 12-character
physical address, containing the hexadecimal characters 0–9, a–f, or A–F only, and
separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the
label of the WiFi device. If you cannot access the label, you can display the MAC address
using the network configuration utilities of the computer. You might also find the MAC
addresses on the Connected Devices page (see View Connected Devices on page 16).
 To use WiFi access control to deny access:

browser.

24

6. In the WiFi Devices section, select the Enable Access Control check box.
The WiFi devices table displays the names and MAC addresses of WiFi devices that are
connected to the extender.
7. Select the Deny check box for the device.
Your settings are saved and that device cannot connect to the extender’s WiFi network.
Set Up an Access Schedule

You can control access to all users during specific periods of the day. You can set up an
access schedule that prevents Internet access through the extender network based on the
times that you set.
 To set up an access schedule:

browser.


25
5. Select Do More > Access Schedule.
6. Select the Access Schedule On radio button.

The page adjusts.
7. In the Days menu and the Time menu, select the days and time when you want to disable
Internet access.
8. Click the Add Time button to add the time that you specified to the Scheduled Times table.
Set Up the Extender to Use a Static IP Address

The extender comes set up to use a dynamic IP address, which is the correct setting for most
home networks.
 To set up the extender to use a static IP address:

browser.

5. Select Settings > WiFi Settings.
The WiFi Settings page displays.

26
6. Scroll down and click the IP Address heading to expand the IP address settings.
By default, the Dynamically get IP Address from Router radio button is selected.
7. Select the Use Static IP Address radio button.
8. Complete the fields to specify the IP network IP addresses.
Use the Extender With MAC Filtering or Access Control

When the WiFi device connects through the extender to your router, the MAC address of the
WiFi device shown on the router is translated to another MAC address. If your router's MAC
filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender but
cannot get an IP address from the extender and cannot access the Internet. To allow the WiFi
device to receive an IP address from the extender and access the Internet, you must provide
the translated MAC address to the router.
 To add a translated MAC address to your router:

1. Log in to your router and disable the MAC filter, WiFi access control, or ACL.
For more information about how to disable your router’s MAC filter, WiFi access control,
or ACL, see your router’s documentation.
2. Power on the extender and connect all of your WiFi devices to the extender.
3. Make sure that the Link Rate LED remains lit.
4. Log in to your extender:
a. Launch a web browser.
b. Enter www.mywifiext.net in the address field of the browser.
c. Enter your email address and password and click the LOG IN button.
The Connected Devices section displays the MAC addresses and virtual MAC addresses
for computers and WiFi devices that are connected to the extender network.

27
6. On the router, add the extender’s virtual MAC address and all the virtual MAC addresses
connected to the extender network to your router’s MAC filter table.
7. Enable the router’s MAC filter, WiFi access control, or ACL.

28
4. Maintain and Monitor the Extender
4
• Change the Extender User Name and Password
• Turn Password Protection Off and On
• Recover a Forgotten User Name or Password
• Automatically Adjust for Daylight Saving Time
• Manually Set the Extender Clock
• Back Up and Manage the Extender Configuration
• Back Up the Configuration Settings
• Return the Extender to Its Factory Default Settings
• Update the Firmware
• Restart the Extender Remotely
29
Change the Extender User Name and Password

You can change the user name and password to log in to the extender.
 To add an extender user:

browser.
5. Select Settings > Password.
6. In the New User Name field, type an email address.

7. Type the password in the New Password field and the Verify Password field.
8. Select questions and enter the answers.
Maintain and Monitor the Extender

30
Turn Password Protection Off and On

We recommend that you leave password protection on to help keep your network secure.
You can turn password protection off and on.
 To turn password protection off or on:

browser.
5. Select Settings > Password Settings.
The Password Settings page displays.
6. Select the Password Off or Password On radio button.
Recover a Forgotten User Name or Password

If you changed the password to access the extender and set up password recovery, you can
recover your password if you lose it.
 To recover your password to access the extender:

browser.
You are prompted to enter a user name and password.
3. Click the Username & Password Help link.
A page displays requesting the answers to your security questions.
If you forgot the answers to your security questions, restore the extender’s factory
settings and set up your login credentials again. See Return the Extender to Its Factory
Default Settings on page 34 and Chapter 2, Get Started.
4. Enter the saved answers to your security questions.
Your email and password are displayed.
6. Click the BACK button.

31

7. Log in to the extender.
Automatically Adjust for Daylight Saving Time

 To set up the extender to automatically adjust for daylight saving time:
browser.
The Access Schedule page displays.
6. Select the Automatically adjust for daylight savings time check box.
Manually Set the Extender Clock

 To manually set the extender clock:
browser.
The Access Schedule page displays.
6. In the Extender Clock section, select the Manual radio button.
7. To specify the time, complete the fields or click the Sync Clock button to synchronize the
extender time to the time on the computer or WiFi device that you are using.

32
Back Up and Manage the Extender Configuration

When the extender works correctly after initial setup, we recommend that you back up the
extender configuration settings. After you back up the settings, if you change the extender
configuration settings but are not content with the new settings, you can restore the extender
configuration to the backed-up settings.
Back Up the Configuration Settings

You can back up the configuration file of the extender.
 To back up the extender configuration settings:

browser.
5. Select Settings > Other Settings.
6. Click the BACKUP button.

Your browser extracts the configuration file from the extender. By default, the name of the
backup file is NETGEAR_EX2700.cfg.
7. If your browser is not set up to save downloaded files automatically, locate where you want
to save the file.
Restore the Configuration Settings

You can restore the configuration file of the extender to a previously saved configuration file.
 To restore the extender configuration settings:

browser.

33

6. Click the BROWSE button.

7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX2700.cfg.
CAUTION:
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
8. Click the RESTORE button.

A confirmation pop-up window opens.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.
Return the Extender to Its Factory Default Settings

Under some circumstances (for example, if you lose track of the changes that you made to
the extender settings), you might want to erase the configuration and reset the extender to
factory default settings.
To reset the extender to factory default settings, you can either use the Factory Reset button
or log in to the extender and reset it.
For a list of factory default settings, see Factory Default Settings on page 43.
 To use the Factory Reset button to return the extender to factory default settings:
CAUTION:
This process erases any settings that you configured in the extender.

34
1. Insert a straightened paper clip into the hole of the Factory Reset button and hold it for
about seven seconds.
Factory Reset
button
2. Release the button.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting.
The extender resets and restarts. This process takes about one minute.
 To log in to the extender and reset the extender’s to factory settings:
CAUTION:
This process erases any settings that you configured in the extender.
browser.

35
CAUTION:
After you click the RESET button, do not try to go online, turn off the
6. Click the Factory Reset button.

A confirmation pop-up window opens.
7. Confirm your decision.
The extender returns to its factory settings and restarts. This process takes about one
minute.
Update the Firmware

Unless you changed the settings in the Firmware Update page previously, the extender is set
up to check for new firmware automatically at login.
 To check manually for new firmware and, if available, update the firmware:
browser.

36
5. Select Settings > Firmware Update.
6. Click the CHECK ONLINE button.

7. If new firmware is available, follow the onscreen prompts to download it onto your computer.
Note: You might need to unzip the firmware file.
8. Click the BROWSE button.

9. Locate and select the new firmware file.
The firmware file name ends with a .img extension.
CAUTION:
After you click the UPLOAD button, do not try to go online, turn off the
10. Click the UPLOAD button.

The firmware update starts and the extender restarts. The firmware update process takes
a couple of minutes.
Restart the Extender Remotely

You can log in to the extender and restart it. When the extender restarts, all computers and
WiFi devices that are connected to its WiFi network are automatically disconnected.
 To restart the extender remotely:

browser.

37
The Other Settings page displays.

6. Click the RESTART button and click the Yes button to confirm.
The extender restarts, which takes about two minutes.

38
5. FAQs and Troubleshooting
5
• FAQs
• Cannot Connect to the Extender
• Cannot Join a WiFi Network and Receive an Error Message
39
FAQs
This section provides answers for difficulties you might experience with the extender.
I forgot my login email address and password. What can I do?
In the login window, click the Username & Password Help link to answer the security
questions that you set up during the initial setup.
If you forgot the answers to your security questions, do the following to set up your login
credentials again:
1. Restore the extender to its factory default settings.
The New Extender Setup page displays.
4. Click the NEW EXTENDER SETUP button.
5. When prompted, complete the fields on the page to set up your login credentials again.
Can I connect the extender to the router or access point with an Ethernet cable?
No. The extender is designed to use WiFi to connect to the router or access point.
The web browser setup keeps asking me for my network password (passphrase) or
security key, and I am sure that I entered the correct password. What can I do?
The extender is probably placed at the borderline of the range covered by the router or
access point.
If you are using WEP security, make sure that you are typing the network password in the
correct field.
I am connected to the extender network and I launched a browser. Why can’t I see the
web browser setup?
Try these troubleshooting steps:
• Make sure that your computer is set up to use DHCP (most are).
• Make sure that the Device Link LED is green and that you are using a valid IP address.
• Relaunch the web browser and type www.mywifiext.net in the address field. Type your
email address and password and click the LOG IN button.
FAQs and Troubleshooting

40
Cannot Connect to the Extender

If you cannot connect to the extender, determine what prevents you from connecting:
• If you forgot your user name or password, click the Username & Password Help link.
For more information, see FAQs on page 40.
• If your browser displays an error page, include http:// in the address field of your browser
by typing http://www.mywifiext.net.
• If you already set up the extender but can no longer connect to it over WiFi, check to see
if the Device Link LED is off or red.
• If you cannot get a WiFi connection working, you can use an Ethernet cable to connect
your computer to the extender.
Cannot Join a WiFi Network and Receive an Error Message

To join a WiFi network, you must know its network name (also called the SSID) so that you
can select it. If the network is secure, you must know the passphrase or key. If the extender
does not connect to the network that you select, the cause might be one of the following:
• It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart
Setup (see Run Smart Setup Installation on page 14) to select a WiFi network and retype
the passphrase or key. The passphrase or key is case-sensitive. For example,
PASSWORD25 is not the same as Password25 or password25.
• If the extender cannot detect your WiFi network, check to see if your WiFi network is still
working. Make sure that the WiFi router is turned on. If possible, move the extender
closer to the WiFi router.
• If the extender Device Link LED is red, the WiFi connection between the WiFi router and
the extender is poor. You can establish the best connection with a clear line of sight
between the extender and the WiFi router. Make sure that no physical obstacles exist
between the extender and the WiFi router, and try to move the extender closer to the WiFi
router.
If you use Smart Setup, and the extender does not connect to the WiFi router, does not
connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup
displays a message to notify you that the extender is not configured.
To run Smart Setup again, click the YES button. To manually configure the extender, click the
NO, CONFIGURE MANUALLY button.
FAQs and Troubleshooting

41
A. Supplemental Information
A
This appendix includes the following sections:
• Factory Default Settings
• Technical Specifications
42
Factory Default Settings

The following table includes the factory settings for the extender. You can use the Factory
Reset button or the Erase feature to return the extender to these settings. (See Return the
Extender to Its Factory Default Settings on page 34.)
Table 2. Factory settings
Feature Setting
Setup Wizard Enabled
WiFi communication Enabled
WiFi network name (SSID) NETGEAR_EXT
Security Disabled
Transmission speed Auto1
Country/region Varies by region
Operating mode 802.11n, 802.11g, 802.11b
Data rate Up to 300 Mbps
DHCP Client enabled
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Technical Specifications
The following table includes the product specifications.
Table 3. Technical specifications
Extender Specifications
Network protocol and standards Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
compatibility
Physical specifications • Dimensions: 67 x 55 x 34 mm (2.64 x 2.17 x 1.34 in.)

• Weight: 98 g (3.46 oz)
Environmental • Operating temperature: 32° to 104°F (0° to 40°C)

• Operating humidity: 90% maximum relative humidity,
noncondensing
• Electromagnetic emissions: Meets requirements of FCC Part 15
Class B.
Interface • Local: 10BASE-T, 100BASE-Tx, RJ-45

• 802.11n, 802.11g, 802.11b
Supplemental Information
43

N300 Wif Range Extender: Model E X2700 User Manual

Uploaded by

Copyright:

Available Formats

N300 Wif Range Extender: Model E X2700 User Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

N300 Wif Range Extender: Model E X2700 User Manual

Uploaded by

Copyright:

Available Formats

N300 WiF Range Extender

350 East Plumeria Drive

Chapter 2 Get Started

Chapter 3 Extender Network Settings

Chapter 4 Maintain and Monitor the Extender

Restore the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Chapter 5 FAQs and Troubleshooting

Appendix A Supplemental Information

Meet Your Extender

Figure 1. Front panel

The following table describes the LEDs.

Table 1. Front panel LEDs (continued)

Power • Solid amber. The extender is booting.

WPS • Solid green. WiFi security is enabled (WPA or WPA2).

When to Use Your Extender

How the Extender Works

WiFi Range Extender

Figure 2. Range extender in a home

Use the Extender

Place the Extender and Apply Power

Connect to an Existing WiFi Network

Connect With WPS

 To use WPS to connect the extender to your WiFi router:

Connect With Web Browser Setup

 To use a web browser to connect the extender to your WiFi router:

4. Click the NEW EXTENDER SETUP button.

6. Select a WiFi network to extend and click the NEXT button.

Note: To connect additional devices, repeat Step 9.

A message displays confirming that the extender is connected and ready.

Connect an Ethernet-Enabled Device

Figure 3. You can connect a device to the extender’s Ethernet port

Log In to the Extender After Installation

 To log in to the extender:

Run Smart Setup Installation

 To run Smart Setup:

View Connected Devices

 To view connected devices:

4. If your browser displays the Menu icon , click it.

View WiFi Settings

4. If your browser displays the Menu icon , click it.

Extender Network Settings

5. Select Settings > WiFi.

Change the WiFi Network Name

4. If your browser displays the Menu icon , click it.

Extender Network Settings

5. Select Settings > WiFi.

6. In the Network Name (SSID) field, type a network name.

Turn Off the SSID Broadcast to Create a Hidden Network

 To turn off the SSID broadcast to create a hidden network:

4. If your browser displays the Menu icon , click it.

Extender Network Settings

5. Select Settings > WiFi.

6. Clear the Broadcast the Network name (SSID) check box.

Disable or Enable the WiFi Radio

 To disable or enable the WiFi radio:

4. If your browser displays the Menu icon , click it.

Extender Network Settings

5. Select Settings > WiFi.

6. Select or clear the Enable 2.4 GHz WiFi check box.