Owner's Manual Blu-Ray Disc Player: DMP-UB200

Owner’s Manual
Blu-ray DiscTM Player

Model No. DMP-UB200
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 14) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.
If you have any questions, visit :

http://shop.panasonic.com/support
Register online at http://shop.panasonic.com/support (U.S. customers only)
P TQBS0145
until
2016/9/20
IMPORTANT SAFETY This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
INSTRUCTIONS
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Contains FCC ID: H8N-WLU5260
5.47-5.725 GHz band is restricted to indoor operations only.
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety FCC CAUTION
instructions listed below. Keep these operating instructions handy for Any changes or modifications not expressly approved by the party
future reference. responsible for compliance could void the user’s authority to operate
1 Read these instructions. this equipment.
2 Keep these instructions. This transmitter must not be co-located or operated in conjunction
3 Heed all warnings. with any other antenna or transmitter.
4 Follow all instructions.
This equipment complies with FCC radiation exposure limits set
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
forth for an uncontrolled environment and meets the FCC radio
7 Do not block any ventilation openings. Install in accordance frequency (RF) Exposure Guidelines in Supplement C to OET65.
with the manufacturer’s instructions. This equipment has very low levels of RF energy that are deemed to
8 Do not install near any heat sources such as radiators, heat comply without testing of specific absorption ratio (SAR).
registers, stoves, or other apparatus (including amplifiers) that But it is desirable that it should be installed and operated keeping
produce heat. the radiator at least 20 cm (7 7/8q) or more away from person’s body
9 Do not defeat the safety purpose of the polarized or (excluding extremities: hands, wrists, feet and ankles).
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and FCC Note:
a third grounding prong. The wide blade or the third prong are This equipment has been tested and found to comply with the limits
provided for your safety. If the provided plug does not fit into for a Class B digital device, pursuant to Part 15 of the FCC Rules.
your outlet, consult an electrician for replacement of the These limits are designed to provide reasonable protection against
obsolete outlet. harmful interference in a residential installation. This equipment
10 Protect the power cord from being walked on or pinched generates, uses, and can radiate radio frequency energy and, if not
particularly at plugs, convenience receptacles, and the point installed and used in accordance with the instructions, may cause
where they exit from the apparatus. harmful interference to radio communications. However, there is no
11 Only use attachments/accessories specified by the guarantee that interference will not occur in a particular installation.
manufacturer. If this equipment does cause harmful interference to radio or
12 Use only with the cart, stand, tripod, television reception, which can be determined by turning the
bracket, or table specified by the equipment off and on, the user is encouraged to try to correct the
manufacturer, or sold with the apparatus. interference by one or more of the following measures:
When a cart is used, use caution when ≥ Reorient or relocate the receiving antenna.
moving the cart/apparatus combination to ≥ Increase the separation between the equipment and receiver.
avoid injury from tip-over. ≥ Connect the equipment into an outlet on a circuit different from
13 Unplug this apparatus during lightning that to which the receiver is connected.
storms or when unused for long periods of ≥ Consult the dealer or an experienced radio/TV technician for help.
time. FCC Caution: To assure continued compliance, follow the attached
14 Refer all servicing to qualified service personnel. Servicing is installation instructions and use only shielded interface cables when
required when the apparatus has been damaged in any way, connecting to peripheral devices.
such as power-supply cord or plug is damaged, liquid has been Any changes or modifications not expressly approved by the party
spilled or objects have fallen into the apparatus, the apparatus responsible for compliance could void the user’s authority to operate
has been exposed to rain or moisture, does not operate this equipment.
normally, or has been dropped.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
CAUTION (2) this device must accept any interference received, including
RISK OF ELECTRIC SHOCK interference that may cause undesired operation.
DO NOT OPEN
Responsible Party:
CAUTION : TO REDUCE THE RISK OF ELECTRIC Panasonic Corporation of North America
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
Two Riverfront Plaza, Newark, NJ 07102-5490
INSIDE. Support Contact: http://shop.panasonic.com/support
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. Conforms to UL STD 60065.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
-2-
Precautions Restriction on use of
unauthorized copied content
WARNING
This unit adopts the following technology for copyright protection.
Unit Cinavia Notice
To reduce the risk of fire, electric shock or product damage, This product uses Cinavia technology to limit the use of
≥ Do not expose this unit to rain, moisture, dripping or splashing. unauthorized copies of some commercially-produced film and
≥ Do not place objects filled with liquids, such as vases, on this videos and their soundtracks. When a prohibited use of an
unit. unauthorized copy is detected, a message will be displayed and
≥ Use only the recommended accessories. playback or copying will be interrupted.
≥ Do not remove covers. More information about Cinavia technology is provided at the
≥ Do not repair this unit by yourself. Refer servicing to qualified Cinavia Online Consumer Information Center at
service personnel. http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to:
AC power supply cord
Cinavia Consumer Information Center, P.O. Box 86851, San
The power plug is the disconnecting device. Diego, CA, 92138, USA.
Install this unit so that the power plug can be unplugged from the
socket outlet immediately.
CAUTION Wireless LAN connection

The following limits are in place regarding the usage of this unit.
Unit You must be aware of these limits before using this unit.
≥ This unit utilizes a laser. Use of controls or adjustments or Panasonic will in no way be responsible for any incidental damage
performance of procedures other than those specified herein which may arise due to a failure to obey these limits, or to any
may result in hazardous radiation exposure. condition of use or disuse of this unit.
≥ Do not place sources of naked flames, such as lighted candles, ≥ Data transmitted and received over radio waves may be
on this unit. intercepted and monitored.
≥ Some portions of this unit may become hot during use. When ≥ This unit contains delicate electronic components.
moving or cleaning this unit, disconnect the AC power supply Please use this unit in the manner in which it was intended and
cord and wait for 3 minutes or longer. follow the following points:
– Do not expose this unit to high temperatures or direct
Placement
sunlight.
To reduce the risk of fire, electric shock or product damage,
– Do not bend, or subject this unit to strong impacts.
≥ Do not install or place this unit in a bookcase, built-in cabinet or
– Keep this unit away from moisture.
in another confined space. Ensure this unit is well ventilated.
– Do not disassemble or alter this unit in any way.
≥ Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥ Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
Batteries
To dispose or transfer this unit
Mishandling of batteries can cause electrolyte leakage and may The unit may keep the user settings information in the unit. If you
cause a fire. discard this unit either by disposal or transfer, then follow the
≥ Danger of explosion if battery is incorrectly replaced. Replace procedure to return all the settings to the factory presets to delete
only with the type recommended by the manufacturer. the user settings. (> 29, “To return all settings to the factory
≥ When disposing of the batteries, please contact your local preset.”)
authorities or dealer and ask for the correct method of disposal. ≥ The operation history may be recorded in the memory of this
≥ Do not mix old and new batteries or different types at the same unit.
time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for
a long period of time. Store in a cool, dark place.
-3-
Table of contents
Reference
IMPORTANT SAFETY
INSTRUCTIONS . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . 3 Setup menu. . . . . . . . . . . . . . . . . 24
Troubleshooting guide . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . 34
Getting started Licenses . . . . . . . . . . . . . . . . . . . 37
Limited Warranty. . . . . . . . . . . . . 38
Accessories . . . . . . . . . . . . . . . . . 5 Referencia rápida en español
Unit and media care . . . . . . . . . . . 5 (Spanish Quick Reference) . . . . 39
Playable media. . . . . . . . . . . . . . . 6 Index . . . . . . . . . . . . . . . Back cover
Control reference guide . . . . . . . . 8
Connecting to a TV . . . . . . . . . . 10 To enjoy Ultra HD Blu-ray Disc featured with
Connecting to High Dynamic Range (HDR)
an amplifier/receiver . . . . . . . . . 11 If you see a message about High Dynamic

Range (HDR) compatible issue while an Ultra
Connecting to the network . . . . . 12 HD Blu-ray Disc is played back, please check
Settings . . . . . . . . . . . . . . . . . . . 13 your TV settings as follows.
An example of the message:
“This player is not connected to a High Dynamic
Range (HDR) compatible TV.”
Playback
1) If you are using a Panasonic TV compatible
with 4K and High Dynamic Range (HDR)
released in 2015 or 2016, please check your
HOME menu . . . . . . . . . . . . . . . 15 TV settings as follows.
Playback. . . . . . . . . . . . . . . . . . . 15 – Switch the TV to the HDMI input.
– Press “MENU” button of your TV remote
Network Service control
(Enjoying NETFLIX, etc.) . . . . . 19 – Select “HDMI HDR setting” in “Setup”
– Select “On” in “HDMI HDR setting”
Home Network feature . . . . . . . . 20
2) If you use a TV not from Panasonic,
VIERA Link . . . . . . . . . . . . . . . . . 21 compatible with 4K and High Dynamic Range
Option menu. . . . . . . . . . . . . . . . 22 (HDR), please refer to the operating
instructions of the TV.
3) When you play a High Dynamic Range (HDR)
disc on a TV without High Dynamic Range
(HDR) capability, the disc can be played back
(in non-HDR quality) even if the message
appears.
-4-
Getting started
Accessories Unit and media care

Getting started
Check the supplied accessories before using this ∫ Clean this unit with a soft, dry cloth
unit. ≥ Never use alcohol, paint thinner or benzine to
1 Remote control clean this unit.
(N2QAYB001167) ≥ Before using chemically treated cloth, carefully
2 Batteries for remote control read the instructions that came with the cloth.
1 AC power supply cord
(K2CB2YY00092) ∫ This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
≥ Product numbers are provided in this Owner’s Manual
correct as of June 2017.
These may be subject to change. ∫ Clean discs
≥ Do not use AC power supply cord with other equipment.
DO DO NOT
∫ Using the remote control
Insert the batteries to the terminal so that it (i
and j) matches those in the remote control.
 Wipe with a damp cloth and then wipe dry with a
dry cloth.
 ∫ Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
R6/LR6, AA ≥ Do not use disc cleaning sprays, benzine,
(Alkaline or manganese batteries)
thinner, static electricity prevention liquids or
Point it at the remote control signal sensor on this any other solvent.
unit. (> 9) ≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
-5-
Getting started
Playable media
Device Media markings Device types Contents format
Ultra HD Blu-ray*1*2 Video
BD-Video Video
BD
Video,
BD-RE
JPEG, MPO
Video, MKV,
BD-R
JPEG, MPO
DVD-Video Video
DVD-R Video, AVCHD, MKV,

JPEG, MPO,
AAC, ALAC,
DVD DSD (DFF, DSF),
FLAC, MP3, WAV,
DVD-R DL
WMA
DVD-RW
Video, AVCHD
— +R/+RW/+R DL
Music CD Music [CD-DA]
MKV,
CD JPEG, MPO,
CD-R
— AAC, ALAC, FLAC,
CD-RW MP3, Music [CD-DA],
WAV, WMA
AVCHD, AVCHD 3D,

MKV, MP4, MPEG2,
USB devices JPEG, MPO,
USB —
(up to 2 TB) AAC, ALAC,
DSD (DFF, DSF),
FLAC, MP3, WAV, WMA
≥ See pages 7 and 34 for more information on the types of content that can be played.
*1 See “Enjoying Ultra HD Blu-ray” (> 17)
*2
Unless otherwise indicated, BD-Video content includes Ultra HD Blu-ray content in this Owner’s Manual.
-6-
Getting started
∫ Types of discs that cannot be played ∫ USB device

by this unit ≥ Connect a USB device while the Home screen
Any other disc that is not specifically is displayed.
supported or previously described. ≥ This unit does not guarantee connection with all
≥ DVD-RAM USB devices.
≥ Super Audio CD ≥ This unit does not support USB device
≥ Photo CD charging.
≥ DVD-Audio ≥ FAT12, FAT16, FAT32, and NTFS file systems
≥ Video CD and Super Video CD are supported.
≥ HD DVD ≥ The USB port on the front of the unit supports
USB 2.0 High Speed and the USB port on the
∫ Region management information rear of the unit supports USB 3.0 Super-Speed.
The unit can play back BD-Video/DVD-Video ≥ The USB port on the rear of the unit supports an
discs of the following regions codes, including HDD formatted in FAT32 and NTFS. If the HDD
“ALL”: is not recognized, the power to the HDD may
Example: BD-Video DVD-Video not be supplied. Supply power from an external
source.
≥ It is not possible to use two USB devices
1 simultaneously. (> 30)
≥ For playback of 4K videos stored on a USB
≥ The unit cannot playback discs in PAL format.
device, use USB 3.0 port on rear of the unit and
USB device conforming to USB 3.0.
∫ Finalize
Any DVD-R/RW/R DL, +R/+RW/+R DL and
CD-R/RW that are recorded by a recorder need to
be finalized by the recorder to play on this unit. ≥ It may not be possible to play the above media in some
Please refer to the recorder’s owner’s manuals. cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
∫ BD-Video ≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
This unit supports high bit rate audio (Dolby® described in this Owner’s Manual. Read the disc’s
Digital Plus, Dolby® TrueHD, DTS-HD High instructions carefully.
Resolution AudioTM and DTS-HD Master AudioTM)
adopted in BD-Video.
∫ 3D
3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI Cable.
∫ Music CD
≥ Operation and sound quality of CDs that do not
comply with CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed to work.
≥ The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
-7-
Getting started
Control reference guide

∫ Remote control
When other Panasonic devices respond to the 1 Turn the unit on and off
remote control of the unit, change the remote 2 TV operation buttons
control code. (> 28) You can operate the TV through the unit’s
remote control. Some buttons may not work
10
depending on the TV.
3 Select title numbers, etc./Enter numbers or
1 11 characters
4 Cancel
2 12 Clear the currently selected character.
(when entering a password for “Ratings” in
13 the Setup menu, for example)
5 Basic playback control buttons (> 15)
14 6 Show Pop-up menu (> 16)
3
15 7 Show Top menu (> 16)
8 Show Option menu (> 22)
16 9 Colored buttons (red, green, yellow, blue)
4
Used for various purposes depending on the
screen
5 10 Transmit the remote control signal
11 Open or close the disc tray (> 9)
12 Change soundtrack (> 16)
13 Show “Video Settings” (> 23)
6 17 14 Show the status messages (> 16)
18 15 Show “Playback Information Window” (> 16)
16 Show the Home screen of the Network
Service (> 19)
7 19
17 Show Closed Caption setup screen
20 (> 22, 26)
18 Show NETFLIX screen (> 19)
8 21 19 Show HOME menu (> 15)
20 [3, 4, 2, 1] : Move the highlight for
9
selection
[OK] : Confirm the selection
(2;)(;1) : Frame-by-frame (> 16)
21 Return to previous screen
∫ Reprogramming the remote control

You can operate the TV using the unit’s remote
control.
1 Input the 2-digit code (> 36) while

pressing [Í] of TV operation button on the
remote control.
e.g., 01: [0] B [1]
2 Test by turning on the television.

≥ If your television brand has more than one code listed,
select the one that allows correct operation.
-8-
Getting started
∫ Front
5 6
1 2 3 4
1 Disc tray 4 POWER LED

2 USB port ( DC 5 V 500 mA) When the unit is turned on, the LED flashes
This port supports USB 2.0 High Speed. first, and then lights up.
3 Remote control signal sensor If the LED keeps flashing, there may be an
Distance: Within approx. 7 m (23 feet) error. (> 33)
Angle: Approx. 20e up and down, 30e left and 5 Open or close the disc tray
right 6 Standby/on switch (Í/I) (> 13)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.

≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
∫ Rear
1 2 3 4 5
1 AC IN ( ) terminal (> 10) 5 USB port (HDD) ( DC 5 V 900 mA)
2 Cooling fan This port supports USB 3.0 Super-Speed.
3 HDMI AV OUT terminal (> 10)
4 LAN port (> 12) Class II equipment (The construction of the product is
double-insulated.)
-9-
Getting started
Connecting to a TV
4K images can be played back when this unit is connected to 4K compatible TV.
≥ Before making any connections, please disconnect all the units from AC power.
(Connect the AC power supply cord after making all connections.)
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
≥ This unit consumes a small amount of AC power (> 34) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
∫ Enjoying 4K output
≥ To enjoy images in 4K/60p, you need an HDMI cable that supports 18 Gbps.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.
It is recommended that you use Panasonic’s HDMI cable.
≥ If you connect this unit to a 4K-compatible TV and perform “Easy Setting”, 4K/60p will be
automatically selected. (> 13, 28)
≥ To view Ultra HD Blu-ray content in 4K/HDR format, connect to the HDMI terminal of a device that
supports HDCP2.2, 4K/60p (4:4:4), and HDR signals that meet Ultra HD Blu-ray standards.
Enjoying video and audio with a 4K-compatible TV
HDMI IN
AC power supply
cord (supplied) HDMI cable
(18 Gbps)
To an AC outlet
- 10 -
Getting started
Connecting to an amplifier/receiver
Enjoying video with a 4K-compatible TV and audio with a 4K-compatible amplifier
HDMI cable
(18 Gbps)
HDMI OUT HDMI IN
HDMI IN (ARC) (ARC)
HDMI cable
(18 Gbps)
Amplifier/receiver
(4K-compatible)

≥ About ARC:
When using the TV or amplifier/receiver that does not have the indication of “(ARC)” (non-ARC-compatible) on the HDMI
terminal, the amplifier/receiver and TV must also be connected using an optical digital cable or coaxial cable in order to
enjoy the TV’s sound through the amplifier/receiver.
Connecting an amplifier to a 4K-compatible TV

3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV.
≥ This connection only supports up to 5.1ch.
≥ To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier
must be ARC-compatible. (> above, “About ARC”)
HDMI cable
(18 Gbps) HDMI IN HDMI OUT
HDMI IN (ARC) (ARC)
HDMI cable
Amplifier/receiver
- 11 -
Getting started
Connecting to the network

The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 14)
≥ You can enjoy BD-Live/Network Service (> 17, 19)
≥ You can access other devices (Home Network) (> 20)
≥ This unit supports Direct Access and can make a wireless connection to wireless devices without
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Direct Access. (> 20)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection

This unit has built-in wireless LAN and can be connected to a wireless router.
Wireless router, etc. Internet
≥ For additional information about this unit refer to

≥ The unit is not compatible with public wireless LAN services.
≥ See page 3 for the precautions of wireless LAN connection.
LAN cable connection

LAN Cable
Broadband router, etc.

Internet
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
- 12 -
Getting started
Settings Easy Network Setting

The following settings can be performed anytime
in the Setup menu. (> 26, 28) After completing “Easy Setting”, you can perform
“Easy Network Setting”.
Easy Setting Follow the on-screen instructions to establish
After connecting your new player for the first time your connection settings.
and pressing [Í], the basic settings screen will
appear. Select “Wired” or “Wireless” and press [OK].
Preparation Easy Network Setting
Turn on the TV and select the appropriate Select a connection mode.
video input.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions to Wired
continue with the settings. Wireless
(e.g., “Quick Start”) OK
RETURN
≥ Certain recent models of Panasonic TVs

(VIERA) may automatically apply their ∫ About the wireless connection
language setting to this unit.
To obtain your network name (SSID*1) and
∫ When connected to a encryption key (password).
4K/60p-compatible TV The default settings may be e.g.
When connected to a 4K/60p-compatible TV, you printed on the router. If the SSID SSID XXXXXXXXXXXX
can set the video output format. and password have been
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
4K60p Output changed, consult the person

responsible for setting up your
Press OK to start the connection check with your 4K TV. network.
Do not operate this unit during connection check.
Notice: Connection check might take up to 30 seconds and video
For more details, refer to the
might appear distorted. manual supplied with the wireless broadband
router, or contact your Internet provider.
Start
If your SSID is not displayed;

OK
RETURN
Search again by pressing the red button on the
Follow the on-screen instructions to set the remote control.
format. Wireless Settings
Select a wireless network for connection.
Press the green button to connect via
PUSH button method.
≥ To reconnect this unit to a 4K/60p-compatible TV after Network name (SSID) Reception
connecting this unit to a 2K-compatible TV and completing XXXXXXXXXX
XXXXXXXXXX
“Easy Setting”, set “4K60p Output” to “4K/60p(4:4:4)” or XXXXXXXXXX
“4K/60p(4:2:0)”. (> 24) XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
Search again PUSH button

OK
RETURN
- 13 -
Getting started
Stealth SSIDs will not be displayed; in this case,

enter manually in the following order. Firmware updates
1 To display the SSID input screen : This unit is capable of checking the firmware
Press [HOME] automatically when connected to the Internet via
> select “Setup” and press [OK] a broadband connection.*3
> select “Player Settings” and press [OK] When a new firmware version is available, the
> select “Network” and press [OK] following message is displayed.
> select “Network Settings” and press [OK]
4
> select “Wireless Settings” and press [OK] Firmware Update
> select “Manual setting” and press [OK] New Version: X.XX
Current Version: X.XX
2 Enter your SSID. Do you want to start firmware update?
For the update information, please visit the
following website:
If the wireless router supports the PUSH http://panasonic.net/support/
button method*2;
You can connect to and configure the security Yes No
settings of your wireless LAN device with ease by
OK
pressing the Link button on the router. RETURN
Select “Yes” to start downloading the firmware.

If your wireless network is encrypted;
When the firmware update starts after the
Enter your encryption key (password).
downloading is finished, a black screen is
≥ You can switch between capital and lower case
displayed and the POWER LED flashes rapidly.
letters by pressing the “Shift” key.
Encryption Key (Password)

You cannot operate the unit until the update is
l complete. Don’t remove the AC power supply
cord during the update. Removing the AC power
Shift 1 2 3 4 5 6 7 8 9 0 Backspace
supply cord while the update is in progress may
Finish
damage the unit.
.
@ * # After the firmware is installed, unit will restart and
Space
/ : ~ _ - , ; ` “ the following screen will be displayed.
Symbols Alphanumeric Other Characters 4
The firmware was updated.

OK
Enter (case sensitive) Current Version: x.xx
RETURN

≥ Refer to the owner’s manuals of the hub or router. ≥ You can also download the latest firmware from the
≥ Do not use this unit to connect to any wireless network for following website and store it to a USB device to
which you do not have usage rights. update the firmware.
Using these networks may be regarded as illegal http://panasonic.jp/support/global/cs/
access. (This site is in English only.)
≥ If you have trouble getting online on your PC after When the update is complete the POWER LED will stop
performing network settings on this unit, perform the rapid flashings and start flashing in a repeating pattern of
network settings on your PC. three flashes. Turn off and on the unit. (> 33)
≥ Please be aware that connecting to a network without ≥ To show the firmware version on this unit. (> 28,
encryption may result in the leaking of data such as “Firmware Version Information”)
personal or secret information. ≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
*1
An SSID (Service Set IDentification) is a name used by connection environment.
wireless LAN to identify a particular network. Transmission *3
You must agree to the terms of use for the Internet function
is possible if the SSID matches for both devices.
and the privacy policy. (> 27, “Notice”)
*2
The PUSH button method is a connection method which
allows you to set encryption for a wireless LAN connection
*4
“X.XX” represents the firmware version number.
with ease.
You can connect to a wireless LAN network by pressing a
certain button on the wireless access point [Link button,
WPS (Wi-Fi Protected SetupTM) button, etc.].
- 14 -
Playback
HOME menu Playback

Playback
Major functions of this unit can be operated from 1 Insert the media.
the HOME menu. Playback starts depending on the media.
Preparation
Turn on the TV and select the appropriate video
2 Select the item to play and press [OK].
input. Repeat this step if necessary.
1 Press [Í] to turn on the unit.

It may take some time until the HOME menu ≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
is displayed. playback to protect the unit’s motor, your TV screen and so
2 Press [OK] or [2, 1] to select the item.
on.
≥ When the following conditions are met, still pictures are
≥ Press [OK] or [3, 4] to select the item if played back in 4K regardless of the image quality.
– The unit is connected to a 4K compatible TV
necessary. – “Resolution” is set to “Auto” or “4K” (> 24)
≥ This unit can not output 4K images when playing back in
3D.
≥ It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
≥ To enjoy BD-Video that supports Dolby Atmos® or DTS:XTM
(> 25)
Operations during playback

Some operations may not work depending on the
Videos/Music/Photos media and contents.
Play back the contents.
Stop
Disc (> right)
≥ When multiple contents Press [∫STOP].
are recorded, select the The stopping point is memorized.
types of contents or the Resume play function
title. Press [1PLAY] to restart from this point.
USB
≥ See “Playable media” ≥ The point is cleared if the media is removed.
(> 6) ≥ On BD-Video discs including BD-J, the
resume play function does not work.
Home Network
Network Contents Pause
(> 20)
Playback Press [;PAUSE].
Media Renderer (> 20) ≥ Press [;PAUSE] again or [1PLAY] to restart
play.
Network Service
Displays the Home screen of Network Service.
(> 19)
Setup
Player Settings (> 24)
Changes the background
Wallpaper
of HOME menu.
BD-Video Data
(> 17)
Erase
To show the HOME menu
Press [HOME].

≥ Items to be displayed may vary with the media.
- 15 -
Playback
Search/Slow motion Show the status messages

Search While playing, press [PLAYBACK INFO.].
While playing, press [SEARCH6] or You can check the detailed video content* playback status.
[SEARCH5].
Video attribute information of video
≥ Ultra HD Blu-ray, MKV, MP4 and MPEG2:
content*.
Audio is not heard. (When “Voice Guidance
Setting” is set to “On”, audio is not heard Audio attribute information of video
regardless of the media.) content*.
Slow motion HDMI output information.
While paused, press [SEARCH6] or
Press [RETURN] to exit.
[SEARCH5].
* BD-Video, DVD-Video, MKV, MP4, MPEG2 (except
≥ BD-Video and AVCHD: [SEARCH5] only. Network Contents)
≥ MKV, MP4 and MPEG2: Not effective.
While playing, press [STATUS].
The speed increases up to 5 steps. The status messages give you information about
≥ Music, MP3, etc.: The speed is fixed to a single what is currently being played. Each time you
step. press [STATUS], the display information may
≥ Press [1PLAY] to revert to normal playback change or disappear from the screen.
speed. ≥ Depending on media and contents, the display
may change or not appear.
Skip e.g., Ultra HD Blu-ray
While playing or paused, press [:] or A
[9].
HDR (High Dynamic Range) Ultra HD Blu-ray
Skip to the title, chapter or track. Play
Frame-by-frame B D
While paused, press [2] (2;) or [1] (;1). T1 C1 ラュンドヱヲナ
≥ Each press shows the next frame.

≥ Press and hold to change in succession forward E F
or backward. A Displayed when an HDR (High Dynamic
≥ Press [1PLAY] to revert to normal playback Range) video signal is being output.
speed. – “HDR (High Dynamic Range: HLG to PQ
≥ BD-Video and AVCHD: Forward only. Conversion)” :
≥ MKV, MP4 and MPEG2: Not effective. The format of the HDR video is converted
from HLG to PQ
Changing soundtrack – “Dynamic Range Conversion Output” : The
Press [AUDIO]. video signal is converted to SDR (Standard
You can change the audio channel number or Dynamic Range)
soundtrack language, etc. B T: Title, P: Program, C: Chapter, PL: Playlist
C Elapsed time in the title
Show top menu/pop-up menu D Method of HDR (High Dynamic Range) video
E Current position
Press [TOP MENU] or [POP-UP MENU]. F Total time
Select the item and press [OK].
e.g., JPEG Date 11/12/2010
No.
Size 500 x 375
Manufacturer
Equipment
- 16 -
Playback
Enjoying Ultra HD Blu-ray Enjoying 3D video and photos

You can enjoy the playback of Ultra HD Blu-ray Preparation
discs with this unit. Connect this unit to a 3D compatible TV. (> 10)
≥ Perform the necessary preparations for the TV.
Preparation
≥ Play back following the instructions displayed
≥ For 4K/HDR viewing, connect to a device and
on the screen.
terminals that support HDCP2.2*1, 4K/60p
≥ 3D Settings (> 23, 26)
(4:4:4) and HDR signals that meet Ultra HD
Blu-ray standards. (> 10)
Due to copyright restrictions, it may not be ≥ Please refrain from viewing 3D images if you do not feel
possible to play back certain discs unless this well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or
unit is connected to the Internet. other discomfort while viewing 3D images, discontinue use
and rest your eyes.
≥ 3D video might not output the way it is set in “Resolution”
and “24p Output” (> 24).
≥ When connected to a device or terminal that does not ≥ When playing back 3D photos from “Photos” screen, select
support HDCP2.2*1, this unit applies Dynamic Range from the “3D” list. (Still pictures in “2D” are played back in
Conversion*2 to HDR signals to output them in 2K 2D.)
resolution. In addition, depending on the disc, it may not be If “2D” and “3D” indications are not displayed, press the
possible to perform playback correctly. red button on the remote control to switch the view of
≥ When connected to a device or terminal that supports 4K/ playback contents.
60p (4:2:0/8 bit) and lower, this unit plays back 60p content
by applying Dynamic Range Conversion*2 to its HDR
signals to output them.
≥ When connected to a device or terminal that does not
support 4K resolution, this unit applies Dynamic Range
Conversion*2 to HDR signals to output them in 2K
Enjoying BD-Live
resolution.
≥ When connected to a device or terminal that does not With “BD-Live” discs, you can enjoy bonus
support HDR, this unit applies Dynamic Range contents that use Internet access.
Conversion*2 to HDR signals to output them. In addition,
depending on the disc, it may not be possible to output For this BD-Live function, connection of a USB
content in 2K resolution or perform playback correctly. device is necessary along with Internet
*1
HDCP is a technology designed to prevent illegal copying. connection.
“2.2” represents a version.
Dynamic Range Conversion is a function that converts
1
*2
HDR video signals into video signals suited to TVs that do Perform network connection and settings.
not support HDR input. (> 12, 13)
2 Connect a USB device with 1 GB or more

free space.
≥ The USB device is used as the local
storage.
3 Insert the disc.
∫ Deleting data on the USB device

Select “BD-Video Data Erase” in the HOME
menu (> 15) and press [OK].

≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs. (> 27)
- 17 -
Playback
Slideshow
Play a slideshow of photos and adjust various
settings during the playback.
1 Insert the media.

2 Select “View Photos”.
3 Select an item and press the green button.
The following items can be set.
Start the slideshow.
Start You can display still pictures in
Slideshow the selected folder one by one
at a constant interval.
Display
Change the display interval.
Interval
Transition Select the effect when sliding
Effect pictures.
Set whether to repeat the
Repeat Play
slideshow.
Set whether to play
background music.
≥ FLAC and MP3, etc., on the
Soundtrack
USB device can be played
back during the slideshow of
JPEG on the USB device.
Soundtrack Select the folder from which
Folder the music files are played.
Background music is played in
Shuffle BGM
random order.

≥ Still pictures displayed as “ ” cannot be displayed as
thumbnail with this unit.
≥ You cannot play back AAC and ALAC as background
music.
- 18 -
Playback
Network Service
(Enjoying NETFLIX, etc.) ≥ In the following cases, settings are possible using the
Setup menu items.
Network Service allows you to access some – When restricting the use of Network Service
(> 28, “Network Service Lock”)
specific websites supported by Panasonic, and – When the audio is distorted
enjoy Internet contents such as photos, videos, (> 27, “Audio Auto Gain Control”)
– When wrong time is displayed
etc. from Network Service home screen. (> 27, “Time Zone”, “DST”)
≥ Some services, such as NETFLIX require a ≥ When using a slow Internet connection, the video may not
be displayed correctly. A high speed Internet service with a
registered account. speed of at least 6 Mbps is recommended.
For details of your NETFLIX account, refer to ≥ Be sure to update the firmware as soon as a firmware
NETFLIX. update notice is displayed on the screen. If the firmware is
not updated, you may not be able to use Network Service
function properly. (> 14)
* ≥ Network Service Home Screen is subject to change
without notice.
≥ The services through Network Service are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
MORE
≥ Some features of websites or content of the service may
not be available.
BACK
≥ Some content may be inappropriate for viewers.

≥ Some content may only be available for specific countries
* Images are for illustration purposes, contents may change and may be presented in specific languages.
without notice.
Preparation
≥ Network connection (> 12)
≥ Network setting (> 13)
– You must agree to the terms of use for the Internet
function and the privacy policy. (> 27, “Notice”)
1 Press [INTERNET].
≥ Netflix can be accessed directly by
pressing [NETFLIX] button.
2 Select the item and press [OK].
To exit from Network Service

Press [HOME].
- 19 -
Playback
Home Network feature Using the Digital Media Controller

Before using the following features, be sure to
configure the connected equipment on your You can use a smartphone or tablet as the Digital
Home Network. Media Controller (DMC) to playback contents
from Network Contents server*1 on the Renderer
Playing back contents on the (this unit).
Network Contents server Possible applications:
You can share photos, videos and music stored in

the Network Contents server*1 [PC, smartphone,
etc.] connected to your home network.
*3
≥ About support format of Network Contents Server
(> 35) Renderer
*3
Controller
*3
Server
i
Server Renderer Controller
Player
1 Press [HOME].
1 Press [HOME].
2 Select “Home Network” and press [OK].
2 Select “Home Network” and press [OK].
3 Select “Media Renderer” and press [OK].
3 Select “Network Contents Playback” and
press [OK]. 4 Select “Home Network” or “Direct
≥ The list can be updated by pressing the Access”*2 and press [OK], then follow the
green button on the remote control. indications on the screen.
≥ The selected equipment can be deleted 5 Operate the DMC compatible devices.
from the list by pressing the red button on
the remote control. To exit from Media Renderer screen
≥ The connection method can be switched to Press [HOME].
Direct Access*2 by pressing the yellow

button on the remote control.
≥ Direct Access*2 connection while using Home Network
4 Select the equipment and press [OK]. feature is only temporary, and the network connection
method returns to the original setting when exiting.
5 Select the item to play and press [OK]. ≥ Depending on the device or connection environment, the
data transfer rate may decrease.
≥ You may be able to use convenient ≥ Depending on the contents and the connected equipment,
playback may not be possible.
functions depending on the content by ≥ Items displayed in gray on the display cannot be played
pressing [OPTION]. back by this unit.
*1 DLNA compatible server, etc.
To exit from Home Network *2 Direct Access is a function which allows you to wirelessly
Press [HOME]. and directly connect wireless LAN-equipped devices to
each other without a wireless router in between. You can
connect devices such as those that support Wi-Fi Direct®.
*3 DMC compatible software should be installed.
- 20 -
Playback
VIERA Link Playing music continuously even

What is VIERA Link? after turning off the TV
When the unit is connected to a Panasonic TV
VIERA Link is a convenient function
(VIERA) that supports VIERA Link and an
which will link the operations of this unit
amplifier/receiver supports VIERA Link.
and a Panasonic TV (VIERA) or other
1 While playing music
device under “VIERA Link”.
Press [OPTION].
You can use this function by connecting
2 Select “TV Power”.
the equipment with an HDMI cable. See
the owner’s manuals for connected
equipment for operational details. Easy control only with VIERA
remote control
Only when TV supports “VIERA Link”
Automatic input switching
By using the TV remote control, you can perform
Power on link various playback operations and settings.
See the owner’s manuals of the TV for more
When the following operations are performed, the
details.
input channel of the TV will be automatically
switched and the screen of this unit will be
displayed.
≥ If you set “VIERA Link” to “Off”, set to “On” (> 28).
If this unit is on and the TV is off, the TV (The default setting is “On”.)
automatically turns on. ≥ The buttons and functions that you can use for this unit
– When play starts on the unit vary depending on the TV. For details, refer to the owner’s
manuals of the TV.
– When you display a menu, such as the HOME ≥ The operation of this unit may be interrupted when you
menu or Setup menu press certain buttons on the TV remote control.
≥ VIERA Link, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC
(Consumer Electronics Control), is a unique function that
Power off link we have developed and added. As such, its operation with
other manufacturers’ equipment that supports HDMI CEC
cannot be guaranteed.
When you set the TV to standby mode, this unit is ≥ Please refer to individual manuals for other manufacturers’
also automatically set to standby mode. equipment supporting VIERA Link function.
- 21 -
Playback
Option menu ∫ Shuffle

Select whether to play shuffle or not.
A variety of playback operations and settings can
be performed from this menu. ∫ Start Slideshow
Available options differ depending on the playing Start the slideshow.
contents and the condition of the unit.
∫ Status
1 Press [OPTION]. Show the status messages.
e.g., BD-Video ∫ Rotate Right
∫ Rotate Left
Operation Menu Rotate the still picture.
Soundtrack 1 ENG DTS-HD MSTR Multi
Subtitle Settings
Angle 1
∫ Wallpaper
Repeat Play
Secondary Video
Off
Set the still picture to the wallpaper of HOME
Playback Information Window menu. (> 15)
Control Panel
Top Menu
Pop-up Menu ∫ Video

Closed Caption
The recording method of original video appears.
∫ Secondary Video
≥ When playing music, select “Playback
Settings” and press [OK]. Select on/off for images. The
Video recording method of original
2 Select an item and change the settings. video appears.
To exit the screen Select on/off for audio and the
Soundtrack
Press [OPTION]. language.
Regarding Language : (> 36) ∫ Playback Information Window (> 16)

This setting is also displayed by pressing
[PLAYBACK INFO.].
Operation Menu ∫ Control Panel

Display the Control Panel.
∫ Soundtrack (> 16) Playing back while using VIERA Link, etc.
This setting is also able to switch by pressing
[AUDIO]. e.g.,
∫ Audio channel
Select the audio channel number.
∫ Subtitle
Press [RETURN] to hide the Control Panel.
∫ Subtitle Settings
Change the subtitle settings. ∫ Top Menu
Display Top Menu.
∫ Angle
Select the number of the angle. ∫ Pop-up Menu
Display Pop-up Menu.
∫ Repeat Play
Select the item that you want to repeat. ∫ Menu
≥ You can repeat the playback of a chapter, Display Menu.
playlist, the entire disc, etc., but the items
displayed will differ depending on the type of ∫ Closed Caption (> 26)
the media. You can only set “Manual setting” and “CC Reset”
≥ Select “Off” to cancel. in the Setup menu.
These settings are also displayed by pressing
[CC].
- 22 -
Playback
∫ Reception ∫ Dynamic Range Conversion Adjustment

The radio wave status during the playback of When this unit is connected to a TV that does not
Network Contents is displayed. (Only when a support HDR (High Dynamic Range) input, HDR
wireless connection is used) video is output converting to a SDR (Standard
Dynamic Range) video signal. If you set a smaller
value, their contrast will be reproduced more
faithfully, but the entire screen will appear darker.
Video Settings To increase the brightness, set a larger value.
These settings are also displayed by pressing ∫ Progressive

[VIDEO SETTING]. Select the method of conversion for progressive
output to suit the type of material being played.
Video Settings ≥ When the content is distorted, change the
Set 1
Display Normal settings from “Auto” to “Video”.

Picture Type Normal
Sharpness Adjustment
Noise Reduction
entt
During BD-Video playback, ∫ Reset to Default Video Settings
Luminance/Color Adjustment
justment
these icons switch to the Return “Video Settings” of the selected tab
Bandwidth Limitationn
Progressive ones for BD Video content. (“Set 1” or “Set 2”) to the factory preset.
Reset to Default Video
eo
o Settings
Set 1
Audio Settings
Switch “Set 1”, “Set 2” or “Standard” by using
[2, 1]. ∫ Sound Effects*
≥ You can register desired settings to “Set 1” and Select the sound effect.
“Set 2”. Settings for BD Video playback and ≥ Night Surround :
settings for the playback of other types of media Enjoy a movie with powerful sound even when
are registered separately. the volume is kept low at night. The audio is set
(The default settings for “Set 1”/“Set 2” are the in such a way that it can be heard easily.
same as the settings for “Standard”.)
≥ You cannot change the “Standard” settings. ∫ DSD Decode Sampling Frequency
Select the settings that suit your sound quality
∫ Display preferences.
Select a setting suitable for your screen.
∫ DSD LPF Setting
∫ Picture Type Select the settings that suit your sound quality
Select the picture quality mode during play.
preferences.
∫ Sharpness Adjustment
∫ Dialog Enhancer*
Adjust the sharpness of images. The greater the
The volume of the center channel is raised to
value is, the sharper images will be.
make dialog easier to hear.
∫ Noise Reduction
* This function is effective only when “Digital Audio Output” is
Reduce unnecessary noise in videos. The　 set to “PCM” (> 25).
greater the value is, the less noise will appear.
∫ Luminance/Color Adjustment
Adjust the contrast, brightness, tone curve (white/
3D Settings
black), color saturation and hue. ∫ Signal Format
∫ Bandwidth Limitation Original Keep original picture format.
Adjust the bandwidth limitations.
3D picture format comprising
Side by side
∫ Dynamic Range Adjustment of left and right screens.
Set the brightness of the entire screen when
∫ Pop-Out Level
outputting HDR (High Dynamic Range) video to a
connected HDR-compatible TV. 3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
- 23 -
Reference
Setup menu ∫ 24p Output

Reference
Content recorded at 24p*2, such as BD-Video

Change the unit’s settings if necessary. The films, is output at 24p when played back.
settings remain intact even if you switch the unit ≥ When this unit is connected to TV compatible
to standby. with 4K/24p and “Resolution” is set to “Auto” or
1 Press [HOME]. “4K”, images will be output in 4K/24p.
≥ When this unit is connected to a TV compatible
with 1080/24p and “Resolution” is set to “Auto”,
2 Select “Setup”. “1080i” or “1080p”, images will be output in
1080/24p.
3 Select “Player Settings”. ≥ If images output in 24p are distorted, change
the setting to “Off”.
Player Settings
HDMI
Resolution Auto ∫ Advanced Settings
Press [OK] to show the following settings:
4K60p Output Off
Video 24p Output Auto
Advanced Settings
Audio
3D ¾ Color Mode
Language
This setting is for selecting color-space
Network
conversion of the image signal.
Ratings
System
OK
¾ Deep Color Output
RETURN
Set the output method to be used when this unit
is connected to a TV that supports Deep Color.
4 Select an item and change the settings.
To exit the screen ¾ HDR (High Dynamic Range) Output
Press [HOME]. Output images in HDR (High Dynamic Range)
format depending on the content and connected
HDMI device.
∫ Resolution ¾ HLG / PQ Conversion

The items supported by the connected devices Set whether or not to convert HDR (High
are indicated on the screen as “¢”. When any Dynamic Range) videos in HLG format to PQ
item without “¢” is selected, the images may be format before outputting them when this unit is
distorted. connected to a TV that supports only HDR (PQ)
≥ If “Auto” is selected, the best suited output format.
resolution to the connected TV is automatically ≥ When “HDR (High Dynamic Range) Output”
selected. is set to “Off”, this setting is disabled.
∫ 4K60p Output ¾ Contents Type Flag

This unit automatically chooses to output images Depending on the playback content, the TV will
in 4K*1 60p when connected to a 4K/60p output adjusting to the optimal method when a
compatible TV. TV that supports this function is connected.
≥ This item is available only when “Resolution” is *1 A high resolution image/display technology of
set to “Auto” and “4K”. approximately 4000 (width) k 2000 (height) pixels.
≥ To connect to a TV that supports 4K/60p (4:4:4/
*2 A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
8 bit) or 4K/60p (4:2:2/12 bit), select “4K/ contents are recorded in 24 frames/second in accordance
60p(4:4:4)”. with the film materials.
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
≥ To connect to a TV that supports 4K/60p (4:2:0/
8 bit), select “4K/60p(4:2:0)”.
- 24 -
Reference
Video
≥ To enjoy BD-Video that supports Dolby Atmos® or
DTS:XTM
∫ Still Mode ( paused video ) Connect this unit to an AV amplifier or similar device that
Select the type of picture shown when you pause supports it with an HDMI cable, and select the following
settings:
playback. – Dolby D/Dolby D +/Dolby TrueHD: “Bitstream”
– DTS/DTS-HD: “Bitstream”
Automatically selects the type – BD-Video Secondary Audio: “Off”
Auto
of picture shown. Dolby Atmos is a trademark of Dolby Laboratories.
Select if jittering occurs when
Field
“Auto” is selected. ∫ Downmix
Select if small text or fine Select the downmix system of multi-channel to
patterns cannot be seen 2-channel sound.
Frame
clearly when “Auto” is ≥ Select “Surround encoded”, when the
selected. connected equipment supports the virtual
surround function.
∫ Seamless Play ≥ The downmix effect is not available when
The chapter segments in playlists are played “Digital Audio Output” is set to “Bitstream”.
seamlessly. ≥ The audio will be output in “Stereo” in the
≥ Select “On” when the picture freezes for a following cases:
moment at the chapters segment in playlists. – AVCHD playback
– Playback of secondary audio (including the
button click sound).
Audio ∫ Audio Delay
∫ Dynamic Range Compression Synchronization between picture and sound is
corrected by adjusting the delay time of the audio
You can listen at low volumes but still hear dialog
output.
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby ∫ Voice Guidance Setting
TrueHD only) Voice Guidance reads aloud various on-screen
≥ “Auto” is effective only when playing Dolby information, such as menu items, explanatory
TrueHD. text, and currently-selected items. (It is also
∫ Digital Audio Output possible to display the “Voice Guidance Setting”
Press [OK] to show the following settings: screen by pressing and holding the [HOME]
button for at least 5 seconds while the HOME
¾Dolby D/Dolby D +/Dolby TrueHD menu is displayed.)
¾DTS/DTS-HD ≥ Information is read aloud in PCM audio format.
Select the audio signal to output. ≥ Audio with sampling frequencies above 48 kHz
≥ Select “PCM”, when the connected are down-sampled to 48 kHz or lower.
equipment cannot decode the respective ≥ When “On” is set, this unit operates in the
audio format. This unit decodes the audio manner described below.
format and transmits to the connected – “Dolby D/Dolby D +/Dolby TrueHD” and
equipment. “DTS/DTS-HD” in “Digital Audio Output” are
≥ If you do not make proper settings the audio fixed to “PCM”. (> left)
may be static or noisy. – Audio is muted during searching
≥ If you set “Voice Guidance Setting” to “On”, ([SEARCH6] or [SEARCH5]).
these settings will be fixed to “PCM”.
¾BD-Video Secondary Audio

Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
- 25 -
Reference
∫ On-screen Language
3D Choose the language for menus and on-screen
∫ 3D BD-Video Playback messages.
Select the playback method of 3D compatible ∫ Closed Caption

video software. Closed captioning services are dependent on
contents, and the unit can display closed captions
∫ 3D AVCHD Output
of both digital and analog types.
Select the output method of 3D AVCHD videos. Press [OK] to show the following settings:
∫ 3D Playback Precautions ¾ Closed Caption Display
Set to display or hide the 3D viewing warning Set whether or not to display closed captions.
screen when playing back the 3D compatible
video software. ¾ Closed Caption Type
Select the closed caption type that matches the
one of the content to be played back.
Language ¾ Analog CC
Select the channel of analog closed captions.
∫ Audio Language
¾ Digital CC
Choose the language for audio.
Select the channel of digital closed captions.
≥ If “Original” is selected, the original language of
each disc will be selected. ¾ Manual setting
≥ When the selected language is not recorded on Set the display style of closed captions.
the disc, or depending on how the navigation is
created on the disc, it may playback in a ¾ CC Reset
different language than the selected language. Restore the default “Closed Caption” settings.
≥ Enter a code (> 36) when you select “Other
¢¢¢¢”.
∫ Subtitle Language
Choose the language for the subtitle. Network
≥ When “Auto” is selected, a subtitle for the
language selected in the “Audio Language” is ∫ Easy Network Setting (> 13)
displayed only when the language other than ∫ Network Settings
the language selected in the “Audio Language”
Perform network-related settings individually.
is played back.
≥ When the selected language is not recorded on
the disc, or depending on how the navigation is ¾ LAN Connection Mode
created on the disc, it may playback in a Select the LAN connection method.
different language than the selected language. ≥ When not using wireless LAN (when turning it
≥ Enter a code (> 36) when you select “Other off), select “Wired”.
¢¢¢¢”.
¾ Wireless Settings
∫ Menu Language This allows the wireless router and connection
Choose the language for the disc menus. settings to be set up. Current connection
≥ Enter a code (> 36) when you select “Other settings and connection state can be checked.
¢¢¢¢”. The wireless router connection wizard will be
displayed.
∫ Subtitle Text Select a connection method to wireless access
Select a desired item according to the language point.
used for MKV subtitles text.
≥ This item is displayed only after playing back a
file.
- 26 -
Reference
Search for wireless network (> 13) ¾ Network Drive Connection

PUSH button method (> 14) This unit can access a hard disk shared folder
PIN code method on a network and play back videos, still
This method allows you to set encryption for a pictures, and music.
wireless LAN connection with ease.
You can connect to a wireless LAN network ¾ Remote Device Settings (> 20)
by entering a PIN code generated by this unit Press [OK] to show the following settings:
into the wireless access point you want to
connect to. Setting Unit Name
Manual setting Set the name of this unit to be displayed on
If a search using “Search for wireless the connected equipment.
network” does not find the wireless access
Registration Type
point you want to connect to, or if you cannot
connect to a wireless LAN network with other Allow connections to all
methods, enter an SSID manually to establish Auto the equipment accessing
a wireless LAN connection. this unit.
Set the permission for
¾IP Address/DNS Settings
individual equipment
This is for checking the state of the network Manual
connections accessing this
connection and setting the IP address and
unit.
DNS-related.
Press [OK] to show the respective setting. Remote Device List
Registering/deregistering of the displayed
¾Proxy Server Settings
equipment can be performed when “Manual”
This is for checking the state of connection with in “Registration Type” is selected.
the Proxy server and performing settings. ≥ You can register up to 16 devices.
Press [OK] to show the respective setting.
Networked Standby
¾Network Service Settings (> 19) Even when “Quick Start” is set to “Off”, by
Press [OK] to show the following settings: using a remote device (smartphone or tablet),
you can wake the unit from the off state and
Audio Auto Gain Control start certain Internet content services.
Volume that is different depending on the ≥ To activate operation from the remote
contents is adjusted automatically to the device, select “On”. But power consumption
standard volume while using the Network in standby mode will increase. (> 34)
Service. ≥ To use this function, you will need a remote
≥ Depending on contents, this function effect device that can run a function that wakes
will not work. another device from Networked Standby
≥ Select “Off” when the audio is distorted. and apps designed for various services of
Time Zone “Network Service”. Refer to the instructions
Set the unit’s time to match your location. for the respective apps for details.
≥ Some Network Service contents require the ≥ Only the devices permitted by the “Remote
time zone to be set. Set time zone if Device List” can be operated.
necessary. ¾ BD-Live Internet Access (> 17)
DST You can restrict Internet access when BD-Live
Select “On” when using Daylight Saving time. functions are used.
≥ If “Allow ( Limited )” is selected, Internet
Notice access is permitted only for BD-Live contents
Displays the terms of service for the cloud which have content owner certificates.
services.
- 27 -
Reference
∫ Remote Control Code

Ratings Change the remote control code if other
The following items use the same password. Panasonic products react to this remote control.
Don’t forget your password. ∫ Firmware Update (> 14)
∫ DVD-Video Ratings Press [OK] to show the following settings:
Set a ratings level to limit DVD-Video play.
¾ Automatic Update Check
∫ BD-Video Ratings When this equipment remains connected to the
Set an age limit of BD-Video (including Ultra HD Internet, it will check for the latest firmware
Blu-ray) play. version when it is turned on and you can update
it if necessary.
∫ Network Service Lock
You can restrict the usage of Network Service. ¾ Update Now
You can update the firmware manually if a
firmware update is available.
System ∫ System Information
∫ Easy Setting
You can execute basic settings. ¾ License
∫ Display Settings Information about the software used by this unit
is displayed.
¾ Firmware Version Information
¾Screen Saver Function
Display firmware version of this unit and
This is to prevent image retention on the wireless LAN module.
screen.
≥ When this is set to “On”: ∫ Restore Default Settings
If a list of playback content is displayed and This returns all values in the Setup menu and the
there is no operation for 5 minutes or more, Option menu to the default settings, except for
the screen switches to HOME menu some settings of network, ratings, remote control
automatically. code, on-screen language, etc.
≥ While playing and pausing, etc., this function
is not available.
¾Status Messages
Choose whether to show status messages
automatically.
¾VIERA Link
Set to use “VIERA Link” function when
connected via HDMI cable to a device that
supports “VIERA Link”.
≥ Select “Off” when you do not want to use
“VIERA Link”.
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to “On”, the internal control unit will be
powered. The idle power consumption will
increase so compared to when set to “Off”.
- 28 -
Reference
Troubleshooting guide General operation

Before requesting service, please perform the
following checks. To return to the factory default.
¾ Select “Yes” in “Restore Default Settings” in
Do you have the latest firmware installed? the Setup menu. (> 28)
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are To return all settings to the factory preset.
enjoying the latest technology. (> 14) ¾ Reset the unit as follows:
4 1 While the unit is on
Make the following checks and visit our Press and hold [OK], the yellow button and
website for more information. the blue button on the remote control at the
http://shop.panasonic.com/support same time for more than 5 seconds.
Enter the model number. – POWER LED starts to flash, and “00 RET”
4 is displayed on the screen.
Or visit our website to find a service center.
2 Press [1] (right) repeatedly on the remote
You can find a service center near you easily
on our website. control until “08 FIN” is displayed on the
screen.
Other support information: 3 Press and hold [OK] for more than 5 seconds.
“Limited Warranty” (> 38)
This unit is turned off when the input for the
TV is switched.
The following do not indicate a problem with
this unit: ¾ This is a normal phenomenon when using
– Regular disc rotating sounds. VIERA Link. For details please read the
– Image disturbance during search. owner’s manuals for the TV.
– Image disturbance when replacing 3D discs.
The remote control doesn’t work properly.
∫ Unit does not respond to remote ¾ Change the batteries in the remote control.
control or unit’s buttons. (> 5)
Press and hold [Í/I] on the main unit for ¾ The remote control and this unit are using
3 seconds. different codes.
– If still unable to turn the unit off, disconnect the Turn on this unit by using [Í/I] on the main
AC power supply cord, wait 1 minute, then unit, and check “Remote Control ”, which is
reconnect the AC power supply cord. displayed on the screen when you press a
∫ Cannot eject disc.
Press and hold [OK] and the displayed
1 While the unit is on number (“”) for more than 5 seconds.
Press and hold [OK], the yellow button and
the blue button on the remote control at the This unit is turned off automatically.
same time for more than 5 seconds. ¾ To save on electricity, this unit is turned off
– POWER LED starts to flash, and “00 RET”
automatically depending on the media if there
is displayed on the screen.
is no button operation for about 20 minutes
when not playing back (such as when paused
control until “06 FTO” is displayed on the
or displaying the menu, displaying still
screen.
pictures, etc.).
3 Press [OK].
- 29 -
Reference
You have forgotten your ratings password.

You want to cancel the ratings level. Picture
¾ The ratings level returns to the factory
Images from this unit do not appear on the TV
defaults. screen, or they are distorted.
1 While the unit is on
¾ An incorrect resolution is selected in
“Resolution”. Reset the setting as follows:
the blue button on the remote control at the
¾ The connected devices are changed. Reset
same time for more than 5 seconds.
the setting as follows:
– POWER LED starts to flash, and “00 RET”
1 While the unit is on
is displayed on the screen.
the blue button on the remote control at the
control until “03 VL” is displayed on the
same time for more than 5 seconds.
screen.
– POWER LED starts to flash.
3 Press [OK].
2 Press [8] and the blue button on the remote
The TV screen turns black. control at the same time for more than
¾ In the following cases, HDMI authentication 5 seconds.
takes place and a black screen is displayed: Set the item again. (> 24)
– When “24p Output” is set to “Auto”. – When Dolby Digital Plus, Dolby TrueHD,
– When the display is switched between 2D and DTS-HD® audio are not output properly,
and 3D images. select “Yes” in “Restore Default Settings”
– When you quit the 4K playback by (> 28) and make proper settings.
displaying another screen, including the – “4K60p Output” will be set to “Off”. Make
HOME menu. the correct setting again. (> 24)
¾ When “3D BD-Video Playback” in the Setup
This unit does not recognize the USB
connection correctly. menu is set to “Auto”, images may not be
output depending on the connection method.
¾ Disconnect and re-connect the USB cable. If
After removing the disc from this unit, select
it still does not recognize the connection, turn
“Set before play” in the Setup menu, and
this unit off and on again.
select “2D Playback” in the setup screen
¾ USB devices may not be recognized by this
displayed when playing 3D discs. (> 26)
unit when connected using the following :
– a USB hub ¾ When outputting in 4K, images may be
– a USB extension cable distorted depending on the HDMI cable. Use
¾ If you connect USB HDD to this unit, use the an HDMI cable that supports 18 Gbps.
USB cable that is supplied with the HDD.
Video is not output in 4K or high-definition.
¾ If the USB HDD is not recognized, the power
¾ Confirm that “Resolution” in the Setup menu
to the USB HDD may not be supplied. Supply
is set properly. (> 24)
power from an external source.
¾ Confirm the HDMI cable, related connections
¾ If you connect a second USB device while a
and the compatibility of TV video input.
screen other than the Home screen is
To output images in 4K, connect the HDMI
displayed, it will not be detected. Display the
cable to a 4K compatible terminal of the
Home screen and reconnect the USB device
connected device. (> 10)
you want to use.
¾ To enjoy image in 4K/60p, set “4K60p Output”
to “4K/60p(4:4:4)” or “4K/60p(4:2:0)”. (> 24)
¾ If “4K60p Output” is set to “4K/60p(4:4:4)”,
check to see if the connected HDMI cable
supports 18 Gbps. (> 10, 24)
¾ If 4K images are not output from the
connected 4K-compatible TV, set “4K60p
Output” to “4K/60p(4:4:4)” or “4K/60p(4:2:0)”.
(> 24)
- 30 -
Reference
Cannot output video in HDR quality even A black band is displayed around the edge of
when connected to an HDR-compatible TV. the screen.
¾ When connected to a device or terminal that The aspect ratio of the screen is abnormal.
does not support HDR, this unit applies ¾ Adjust the aspect setting on the TV.
Dynamic Range Conversion to HDR signals
There is a lot of image lag when playing video.
to output them. In addition, depending on the
disc, it may not be possible to output content ¾ Set “0” all items in the “Noise Reduction”.
in 2K resolution or perform playback correctly. (> 23)
(> 17) ¾ Set “Audio Delay”. (> 25)
¾ Video may not be output from your TV in HDR
quality, depending on the content. Set “HDR
(High Dynamic Range) Output” and “HLG / Audio
PQ Conversion” to “Auto”. (> 24)
Cannot hear the desired audio.
3D video is not output. ¾ Check the connections and the “Digital Audio
¾ Connect to a 3D compatible device (e.g., TV Output” settings. (> 11, 25)
and amplifier/receiver).
¾ When a non-3D compatible amplifier/receiver There is no sound coming out.
is connected between this unit and a TV, 3D ¾ Refer to “Connecting to an amplifier/receiver”
video is not output. (> 11) (> 11) to check the audio output settings
¾ Confirm the settings on this unit and the TV suited to the connections of your device.
for 3D. (> 17)
3D video is not output correctly as 2D. Playback

¾ Select “Set before play” in the Setup menu, Disc cannot be played.
and select “2D Playback” in the setup screen
¾ The disc is dirty. (> 5)
displayed when playing 3D discs. (> 26, “3D
¾ The disc is not finalized. (> 7)
BD-Video Playback”)
¾ Depending on the Ultra HD Blu-ray disc, it
¾ Discs that have recorded titles with Side by
may not be possible to perform playback
side (2 screen structure) and that can be
unless this unit is connected to the Internet.
enjoyed in 3D are played back in accordance
with the settings of the TV. Still pictures (JPEG) do not play back
normally.
No subtitles. ¾ The images that were edited on the PC, such
¾ When progressive output is on, closed as Progressive JPEG, etc., may not be played
captions/subtitles cannot be displayed. back.
The subtitles overlap closed captions I can’t play back BD-Live.
recorded on discs. ¾ Confirm that this unit is connected to the
¾ Turn off the subtitles or the closed captions. broadband Internet. (> 12)
(> 22, 26) ¾ Confirm the “BD-Live Internet Access”
settings. (> 27)
Closed captions are not displayed.
¾ Confirm a USB device is connected to the
¾ Confirm that the source content supports CC.
USB port. (> 9)
¾ Confirm the “Closed Caption Display” is set to
“On”. (> 22, 26)
¾ Change the “Closed Caption Type” setting.
(> 22, 26)
¾ Confirm the “Analog CC” or “Digital CC” is set
properly (> 22, 26).
Cannot play back videos on the USB device

smoothly.
¾ Use the port on the rear side of this unit,
which supports USB 3.0.
- 31 -
Reference
Network Messages on the screen

I can’t connect to the network. Cannot read. Please check the disc.
¾ Confirm the network connection and settings. ¾ You inserted an incompatible disc.
(> 12, 13, 26)
Cannot play this file.
¾ There may be interference that prevents the ¾ You tried to play a non-compatible video.
unit from detecting your home network. Place
the unit and the wireless router closer to each No disc inserted.
other. This unit may be able to detect your ¾ The disc may be upside down.
network name (> 14, “SSID”).
¾ Check the owner’s manuals for each device $ This operation is not available.
¾ Some operations are unsupported by the unit.
and connect accordingly.
(For example, reverse slow motion, etc.)
When using wireless LAN connection, video
from the Network Contents server* is not IP address is not set.
played back or video frames are dropped ¾ The “IP Address” in “IP Address/DNS
during playback. Settings” is “---. ---. ---. ---”. Set the “IP
¾ Higher transfer rate router such as 802.11n Address”, “Subnet Mask”, and “Default
(2.4 GHz or 5 GHz) wireless router may solve Gateway”. (Select the automatic address
the problem. If you use 802.11n (2.4 GHz or acquisition if necessary.)
5 GHz) wireless router, it is necessary to set the The current wireless network security setting
encryption type to “AES”. is weak. It is recommended to change to a
Simultaneous use with a microwave, cordless stronger security setting.
telephone etc. at 2.4 GHz may result in ¾ Set a stronger network security level referring
connection interruptions or other problems. to the wireless router owner’s manuals.
¾ On the “Wireless Settings” screen (> 26), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 13) again.
* DLNA compatible server, etc.
- 32 -
Reference
POWER LED
When the POWER LED is flashing other than
during power up or down of this unit, check the
message on the TV screen. If a message is not
displayed on the TV screen, determine the type of
the error by checking the way the POWER LED is
flashing.
Symbols indicate the following states:

Flash
No illumination
Repetition
(Flashes 6 times)
¾ The remote control and this unit are using
different codes.
Turn on this unit by using [Í/I] on the main
unit, and check “Remote Control ” which is
displayed on the screen when you press a
Press and hold [OK] and the displayed
number (“”) for at least 5 seconds.
(Flashes 4 times)
¾ The unit fails to operate properly. Press [Í/I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
(Flashes)
¾ The copyright protected disc cannot be
played back.
One of the devices connected to this unit (TV,
amplifier, etc.) does not support copyright
protection.
¾ Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
¾ A firmware update is in progress.
(Flashes 3 times)
¾ The disc in use cannot be played back since
the copyright information is invalid.
¾ A firmware update using a USB device is
complete.
- 33 -
Reference
Specifications File format
General File format Extension Reference

“.MKV”, ≥ Resolution up to
“.mkv” 3840x2160 30p,
Signal system NTSC 4096x2160 24p.
Operating i5 oC to i35 oC ≥ The video file and
temperature range (i41 oF to i95 oF) subtitles text file are
inside the same folder,
Operating humidity 10 % to 80 % RH MKV Subtitles and the file names are
range (no condensation) (Compression text file the same except for the
methods “.SRT”,
HDMI OUT 1 pc. file extensions.
Video: H.264/HEVC “.srt”,
(19 pin type A) Output Audio format : PCM, Dolby ≥ Some MKV files may not
Audio: AAC, PCM, “.SSA”,
Digital, Dolby Digital Plus, Dolby be played back correctly,
Vorbis, FLAC) “.ssa”, depending on the video
TrueHD, DTS®, DTS-HD High “.ASS”, resolution, frame rate
Resolution AudioTM, DTS-HD “.ass” condition, subtitle format
Master AudioTM and so on.
USB port (Type A) Front : 1 pc., ≥ MOTION JPEG is not
DC 5 V, Max. 500 mA supported.
[High-Speed USB (USB 2.0)] mp4 ≥ Resolution up to
Rear : 1 pc., “.MP4”,
(Compression 3840×2160 30p,
“.mp4”,
DC 5 V, Max. 900 mA methods 4096×2160 24p. (except
“.MOV”,
[Super-Speed USB (USB 3.0)] Video: H.264/HEVC MPEG2)
“.mov”
Audio: AAC) ≥ Some mp4/MPEG files
LAN (Ethernet) Port 1 pc. may not be played back
10BASE-T/100BASE-TX correctly, depending on
Wireless LAN Standard Compliance: MPEG “.MPG”, the video resolution,
(TS/PS) “.mpg”, frame rate condition and
IEEE802.11 a/b/g/n
“.MPEG”, so on.
(Compression
Frequency Range: “.mpeg”, ≥ MOTION JPEG is not
methods
2.4 GHz/5 GHz band Video: MPEG2 “.M2TS”, supported.
“.m2ts”, ≥ Depending on the audio
Security: /H.264*1/HEVC*1
“.MTS”, compression method,
Encryption type: TKIP/AES, Audio: AAC*1
“.mts”, only images may be
Authentication type: PSK, WEP /Dolby Digital
“.TS”, played back and it may
(64 bit/128 bit) /LPCM*2)
“.ts” not be possible to output
LASER Specification Class I LASER Product audio.
Wave length: 777-800 nm (CDs)/ ≥ MOTION JPEG and
650-665 nm (DVDs)/ Progressive JPEG are
400-410 nm (BDs) not supported.
Laser power: No hazardous “.JPG”, ≥ You may not be able to
radiation is emitted with the safety JPEG
“.jpg” play back the file if you
protection have edited the folder
structure or the file name
Power supply AC 120 V, 60 Hz on a PC or other device.
Power consumption Approx. 26 W “.MPO”,
MPO 3D still picture
Power consumption in Approx. 7 W “.mpo”
quick start standby mode (Quick Start: On)
This unit supports ID3 tags,
Power consumption Approx. 0.2 W “.MP3”, but only titles, artist names
MP3
in standby mode (Quick Start: Off, “.mp3” and album names can be
Networked Standby: Off) displayed.
Dimensions 320 mmk45 mmk193 mm This unit supports tags, but
(WkHkD) (Approx. 12 5/8zk1 13/16zk7 5/8z) only titles, artist names and
Including the “.FLAC”, album names can be
FLAC
projecting parts “.flac” displayed. Maximum
sampling rate: 192 kHz/
Mass (Weight) Approx. 1.3 kg (2.9 lbs) 24 bit
≥ Specifications are subject to change without notice. “.WAV”, Maximum sampling rate:
WAV
“.wav” 192 kHz/32 bit
“.M4A”, Maximum sampling rate:
AAC
“.m4a” 48 kHz/320 kbps
- 34 -
Reference
File format Extension Reference

Supported format for Network
This unit supports tags, but
only titles, artist names and Contents Playback
“.WMA”, album names can be
WMA
“.wma” displayed. Maximum When this unit works as a Network Contents
sampling rate:
48 kHz/385 kbps client, following contents are playable.
“.DSF”, ≥ File formats that are not supported by your
DSD “.dsf”, 2.8 MHz (2 ch/5.1 ch), Network Contents server* cannot be played.
(DFF, DSF) “.DFF”, 5.6 MHz (2 ch only) * DLNA compatible server, etc.
“.dff”
96 kHz/32 bit (Max.7.1 ch), Video
“.M4A”,
ALAC 176.4/192 kHz/32 bit
“.m4a”
(Max.5.1 ch) Example of
Container Video codec Audio codec
*1
TS only file extension
*2 PS only AAC
H.264 PCM
≥ With certain recording states and folder structures, the play MKV .mkv
HEVC Vorbis
order may differ or playback may not be possible. FLAC
≥ A combined total of up to 10,000 files and folders can be AVCHD H.264 Dolby Digital .mts
displayed as playable data in each folder regardless of
their format. H.264
MP4 AAC .mp4, .mov
(Even when the picture playback menu is displayed, for HEVC
example, if a folder in the menu contains playable videos Dolby Digital
PS MPEG2 .mpg, .mpeg
and music files, they are also counted as playable data.) Linear PCM
MPEG2
AAC
TS H.264 .m2ts, .ts
Dolby Digital
HEVC
Audio information
Photo
The audio output differs depending on the
settings on the unit are connected to the amplifier/ Format Example of file extension
receiver. (> 25, “Digital Audio Output”) JPEG .jpg
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/ Audio
receiver compatible with the respective audio format.
Audio codec Example of file extension
HDMI OUT MP3 .mp3
FLAC .flac
“Digital Audio Output”
WAV .wav
“Bitstream” “PCM”*1 AAC .m4a, .adts
BD-Video : WMA .wma
Output Outputs using 7.1ch PCM*2*3 ALAC .m4a
channel original audio*2 DVD-Video :
5.1ch PCM DSD .dsf, .dff
Linear PCM —
*1
The maximum possible number of Dolby sound is 2ch
≥ Depending on the server, the contents other than stated
PCM. above can be played back.
*2
When “BD-Video Secondary Audio” is set to “On”, the
audio will be output as Dolby Digital, DTS Digital
SurroundTM or 5.1ch PCM. However, when playing
BD-Video without secondary audio or navigation sounds,
the audio is output as the original format.
*3
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch
depending on the DTS, Inc. specifications.
- 35 -
Reference
Language code list Display languages list
Language Code Language Code Language Code Display Language Display Language Display Language
Abkhazian: 6566 Gujarati: 7185 Rhaeto-Romance: ENG English JPN Japanese ARA Arabic
Afar: 6565 Hausa: 7265 8277 FRA French CHI Chinese HIN Hindi
Afrikaans: 6570 Hebrew: 7387 Romanian: 8279 DEU German KOR Korean PER Persian
Albanian: 8381 Hindi: 7273 Russian: 8285 ITA Italian MAL Malay IND Indonesian
Amharic: 6577 Hungarian: 7285 Samoan: 8377 ESP Spanish VIE Vietnamese MRI Maori
Arabic: 6582 Icelandic: 7383 Sanskrit: 8365 NLD Dutch THA Thai BUL Bulgarian
Armenian: 7289 Indonesian: 7378 Scots Gaelic: 7168 SVE Swedish POL Polish RUM Romanian
Assamese: 6583 Interlingua: 7365 Serbian: 8382 NOR Norwegian CES Czech GRE Greek
Aymara: 6589 Irish: 7165 Serbo-Croatian: 8372 DAN Danish SLK Slovak TUR Turkish
Azerbaijani: 6590 Italian: 7384 Shona: 8378 POR Portuguese HUN Hungarian Others
Bashkir: 6665 Japanese: 7465 Sindhi: 8368 RUS Russian FIN Finnish
Basque: 6985 Javanese: 7487 Singhalese: 8373
Bengali; Bangla: Kannada: 7578 Slovak: 8375
6678 Kashmiri: 7583 Slovenian: 8376
Bhutani: 6890 Kazakh: 7575 Somali: 8379
Bihari: 6672 Kirghiz: 7589 Spanish: 6983 TV code list
Breton: 6682 Korean: 7579 Sundanese: 8385
Bulgarian: 6671 Kurdish: 7585 Swahili: 8387
Burmese: 7789 Laotian: 7679 Swedish: 8386 Brand TV Code
Byelorussian: 6669 Latin: 7665 Tagalog: 8476 Panasonic 01/02
Cambodian: 7577 Latvian, Lettish: 7686 Tajik: 8471 LG 10/11
Catalan: 6765 Lingala: 7678 Tamil: 8465
Chinese: 9072 Lithuanian: 7684 Tatar: 8484 SAMSUNG 20/21/22
Corsican: 6779 Macedonian: 7775 Telugu: 8469 SONY 30
Croatian: 7282 Malagasy: 7771 Thai: 8472
Czech: 6783 Malay: 7783 Tibetan: 6679 VIZIO 40/41
Danish: 6865 Malayalam: 7776 Tigrinya: 8473
Dutch: 7876 Maltese: 7784 Tonga: 8479
English: 6978 Maori: 7773 Turkish: 8482
Esperanto: 6979 Marathi: 7782 Turkmen: 8475
Estonian: 6984 Moldavian: 7779 Twi: 8487
Faroese: 7079 Mongolian: 7778 Ukrainian: 8575
Fiji: 7074 Nauru: 7865 Urdu: 8582
Finnish: 7073 Nepali: 7869 Uzbek: 8590
French: 7082 Norwegian: 7879 Vietnamese: 8673
Frisian: 7089 Oriya: 7982 Volapük: 8679
Galician: 7176 Pashto, Pushto: 8083 Welsh: 6789
Georgian: 7565 Persian: 7065 Wolof: 8779
German: 6869 Polish: 8076 Xhosa: 8872
Greek: 6976 Portuguese: 8084 Yiddish: 7473
Greenlandic: 7576 Punjabi: 8065 Yoruba: 8979
Guarani: 7178 Quechua: 8185 Zulu: 9085
- 36 -
Reference
Licenses This product incorporates the following software:

(1) the software developed independently by or for Panasonic
Corporation,
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/ (2) the software owned by third party and licensed to Panasonic
Progressive” are trademarks of Panasonic Corporation and Sony Corporation,
Corporation. (3) the software licensed under the GNU General Public License,
Version 2.0 (GPL V2.0),
Java is a registered trademark of Oracle and/or its affiliates. (4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL V2.1), and/or
Dolby, Dolby Audio, and the double-D symbol are trademarks of (5) open source software other than the software licensed under
Dolby Laboratories. the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope
For DTS patents, see http://patents.dts.com. Manufactured under that it will be useful, but WITHOUT ANY WARRANTY, without
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & even the implied warranty of MERCHANTABILITY or FITNESS
DTS and the Symbol together are registered trademarks, and FOR A PARTICULAR PURPOSE.
DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Please refer to the detailed terms and conditions thereof shown in
© DTS, Inc. All Rights Reserved. the Player Settings menu.
At least three (3) years from delivery of this product, Panasonic
The terms HDMI and HDMI High-Definition Multimedia Interface, will give to any third party who contacts us at the contact
and the HDMI Logo are trademarks or registered trademarks of information provided below, for a charge no more than our cost of
HDMI Licensing, LLC in the United States and other countries. physically performing source code distribution, a complete
machine-readable copy of the corresponding source code covered
<AVC> under GPL V2.0, LGPL V2.1 or the other licenses with the
This product is licensed under the AVC Patent Portfolio License for obligation to do so, as well as the respective copyright notice
the personal use of a consumer or other uses in which it does not thereof.
receive remuneration to (i) encode video in compliance with the Contact Information: oss-cd-request@gg.jp.panasonic.com
AVC Standard ("AVC Video") and/or (ii) decode AVC Video that The source code and the copyright notice are also available for
was encoded by a consumer engaged in a personal activity and/or free in our website below.
was obtained from a video provider licensed to provide AVC http://panasonic.net/avc/oss/
Video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com (1) MS/WMA
<VC-1> This product is protected by certain intellectual property rights
This product is licensed under the VC-1 Patent Portfolio License of Microsoft Corporation and third parties. Use or distribution of
for the personal and non-commercial use of a consumer to (i) such technology outside of this product is prohibited without a
encode video in compliance with the VC-1 Standard ("VC-1 license from Microsoft or an authorized Microsoft subsidiary
Video") and/or (ii) decode VC-1 Video that was encoded by a and third parties.
consumer engaged in a personal and non-commercial activity (2) MS/PlayReady/Final Product Labeling
and/or was obtained from a video provider licensed to provide This product contains technology subject to certain intellectual
VC-1 Video. No license is granted or shall be implied for any other property rights of Microsoft. Use or distribution of this
use. Additional information may be obtained from MPEG LA, technology outside of this product is prohibited without the
L.L.C. appropriate license(s) from Microsoft.
See http://www.mpegla.com (3) MS/PlayReady/End User Notices
Content owners use Microsoft PlayReady™ content access
MPEG Layer-3 audio coding technology licensed from Fraunhofer technology to protect their intellectual property, including
IIS and Thomson. copyrighted content. This device uses PlayReady technology
to access PlayReady-protected content and/or
“DVD Logo” is a trademark of DVD Format/Logo Licensing WMDRM-protected content. If the device fails to properly
Corporation. enforce restrictions on content usage, content owners may
require Microsoft to revoke the device’s ability to consume
“Wi-Fi®” and “Wi-Fi Direct®” are registered trademarks of Wi-Fi PlayReady-protected content. Revocation should not affect
Alliance®. unprotected content or content protected by other content
“Wi-Fi Protected SetupTM” and “WPATM” are trademarks of Wi-Fi access technologies. Content owners may require you to
Alliance®. upgrade PlayReady to access their content. If you decline an
upgrade, you will not be able to access content that requires
Windows is a trademark or a registered trademark of Microsoft the upgrade.
Corporation in the United States and other countries. (4) Vorbis, FLAC, WPA Supplicant
The software licenses are displayed when “License” in the
Android is a trademark of Google Inc. Setup menu is selected. (> 28)
Copyright 2004-2014 Verance Corporation. CinaviaTM is a Verance
Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance
Corporation. All rights reserved.
- 37 -
Reference
Limited Warranty
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA Only) (As examples, this excludes damages for lost time, travel to and
If your product does not work properly because of a defect in from the servicer, loss of or damage to media or images, data or
materials or workmanship, Panasonic Corporation of North other memory or recorded content. The items listed are not
America (referred to as “the warrantor”) will, for the length of the exclusive, but for illustration only.)
period indicated on the chart below, which starts with the date of ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
original purchase (“warranty period”), at its option either (a) repair WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
your product with new or refurbished parts, (b) replace it with a PERIOD OF THE LIMITED WARRANTY.
new or a refurbished equivalent value product, or (c) refund your Some states do not allow the exclusion or limitation of incidental or
purchase price. The decision to repair, replace or refund will be consequential damages, or limitations on how long an implied
made by the warrantor. warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also
Product or Part Name Parts Labor have other rights which vary from state to state. If a problem with
this product develops during or after the warranty period, you may
Blu-ray Disc Player 1 Year 90 Days
contact your dealer or Service Center. If the problem is not
All included Accessories handled to your satisfaction, then write to:
(Except Non-Rechargeable 90 Days Not Applicable Consumer Affairs Department
Batteries) Panasonic Corporation of North America
661 Independence Pkwy
Only Non-Rechargeable Batteries 10 Days Not Applicable
Chesapeake, VA 23320
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS

During the “Labor” warranty period there will be no charge for LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
labor. During the “Parts” warranty period, there will be no charge
for parts. This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts
(cabinet). This warranty only applies to products purchased and
serviced in the United States. This warranty is extended only to the
original purchaser of a new product which was not sold “as is”.
Mail-In Service--Online Repair Request

Online Repair Request for all your Panasonic gear
To submit a new repair request and for quick repair status visit our
Web Site at http://shop.panasonic.com/support Go to
When shipping the unit, carefully pack, include all supplied
accessories listed in the Owner’s Manual, and send it prepaid,
adequately insured and packed well in a carton box. When
Get everything you need to get the most out of
shipping Lithium Ion batteries please visit our Web Site at your Panasonic products
http://shop.panasonic.com/support as Panasonic is committed to
providing the most up to date information. Include a letter detailing
Accessories & Parts for your Camera, Phone, A/V
the complaint, a return address and provide a daytime phone products, TV, Computers & Networking, Personal
number where you can be reached. A valid registered receipt is
required under the Limited Warranty.
Care, Home Appliances, Headphones, Batteries,
Backup Chargers & more...
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD,
THE PURCHASER WILL BE REQUIRED TO FURNISH A Customer Services Directory
SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE
OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. For Product Information, Operating Assistance,
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY Parts, Owner’s Manuals, Dealer and Service info
UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
go to http://shop.panasonic.com/support
Limited Warranty Limits and Exclusions
This warranty ONLY COVERS failures due to defects in materials For the hearing or speech impaired TTY: 1- 877-833-8855
or workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER 1705
damages which occurred in shipment, or failures which are caused
by products not supplied by the warrantor, or failures which result
from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance,
power line surge, lightning damage, modification, introduction of
sand, humidity or liquids, commercial use such as hotel, office,
restaurant, or other business or rental use of the product, or
service by anyone other than a Factory Service Center or other
Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS
LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY.
- 38 -
Reference
Referencia rápida en español

(Spanish Quick Reference)
Conecte el cable de alimentación de
Conexiones básicas
CA por último
Conexión a un televisor compatible
con HDMI
Cable HDMI
HDMI IN
Cable de alimentación de CA
(incluido)
A una toma
de corriente
doméstica
Conexión a un televisor compatible ≥ Conéctelo cuando haya realizado el resto de conexiones.

con HDMI y a un amplificador/
receptor compatible con HDMI Ahorro de energía
Esta unidad consume una pequeña cantidad de energía
aunque esté ajustada en el modo de espera (Accionamiento
rápido : Desactivado, En red En espera : Desactivado, aprox.
0,2 W). Para ahorrar energía cuando no vaya a utilizar la
unidad durante mucho tiempo, desenchúfela de la toma de
HDMI IN
Cable HDMI (ARC) corriente.
HDMI OUT
HDMI IN (ARC)
Amplificador/Receptor
- 39 -
Reference
Reproducción básica
Preparación
Encienda el televisor y seleccione la entrada de
vídeo adecuada en el televisor.
1 Pulse [Í] para encender la unidad.
Después de conectar su nuevo reprodutor y
pulsar el botón de encendido, aparecerá la
pantalla de la configuración básica.
2 Inserte el medio.
Inicia la reproducción
Pulse [1PLAY].
Parada
Pulse [∫STOP].
La posición de detención se memoriza.
Función de reanudación de la reproducción
Pulse [1PLAY] para reiniciar la reproducción
desde esta posición.
≥ El punto se anula si se extrae el medio.
≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
Pausa
Pulse [;PAUSE].
≥ Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la
reproducción.
Búsqueda/Cámara lenta
Búsqueda
Durante la reproducción, pulse [SEARCH6]
o [SEARCH5].
≥ Ultra HD Blu-ray, MKV, MP4 y MPEG2: No se escucha
sonido. (Cuando “Ajuste de la Guía por voz” está
configurado como “Activado”, el audio no se escucha con
independencia del medio.)
Cámara lenta
Durante la pausa, pulse [SEARCH6] o
[SEARCH5].
≥ Vídeo BD y AVCHD: [SEARCH5] únicamente.
≥ MKV, MP4 y MPEG2: No es eficaz.
La velocidad aumenta hasta 5 pasos.

≥ Música y MP3, etc.: La velocidad está fija en un paso.
≥ Pulse [1PLAY] para recuperar la velocidad de
reproducción normal.
Salto
Durante la reproducción o la pausa, pulse
[:] o [9].
Salta hasta el título, capítulo o pista que desee
reproducir.
- 40 -
Index
A Audio M Media Renderer . . . . . . 20 W Wireless LAN . . . . . . . . 12
Changing audio . . . . . .16 N Network
Language . . . . . . . . . . .26 24p . . . . . . . . . . . . . . . . . . 24
Connection . . . . . . . . . 12
B BD-Live . . . . . . . . . . . . . .17 Setting . . . . . . . . . 13, 26 4K . . . . . . . . . . . . . . . . 13, 24
C Closed Caption . . . . .22, 26 Network Service . . . . . . .19
D DMC . . . . . . . . . . . . . . . . .20 P Pop-up menu . . . . . . . . . .16
F File format. . . . . . . . . . . .34 POWER LED. . . . . . . . .9, 33
Firmware update . . . . . . .14 Q Quick Start . . . . . . . . . . 28
H HDR . . . . . . . . . . . . . . .4, 17 R Repeat play . . . . . . . . . . 22
L LAN . . . . . . . . . . . . . . . . .12 Restore Default
Language Settings . . . . . . . . . . . . . . .28
Audio . . . . . . . . . . . . . .26 Resume play function . . .15
Code list . . . . . . . . . . . .36 S Subtitle . . . . . . . . . . 22, 26
Menu . . . . . . . . . . . . . .26 U Ultra HD Blu-ray . . . . . . 17
On-screen. . . . . . . . . . .26
Soundtrack . . . . . . . . . .22 USB device . . . . . . . . . . . . .7
Subtitle . . . . . . . . . .22, 26 V VIERA Link . . . . . . . . . . 21
USA Only: Disposal may be regulated in your community due to environmental considerations. For
disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental/
or call 1-888-769-0149.
(Inside of product)
User memo:
The model number and serial number of this product can be found DATE OF PURCHASE
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for DEALER NAME
future reference.
DEALER ADDRESS
MODEL NUMBER DMP-UB200
SERIAL NUMBER
TELEPHONE NUMBER
Panasonic Corporation of North America

pr
Two Riverfront Plaza, Newark, NJ 07102-5490
http://shop.panasonic.com
TQBS0145
© Panasonic Corporation 2017 F0617SK0

Owner's Manual Blu-Ray Disc Player: DMP-UB200

Uploaded by

Copyright:

Available Formats

Owner's Manual Blu-Ray Disc Player: DMP-UB200

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Owner's Manual Blu-Ray Disc Player: DMP-UB200

Uploaded by

Copyright:

Available Formats

Owner’s Manual

Blu-ray DiscTM Player

Thank you for purchasing this product.

If you have any questions, visit :

Register online at http://shop.panasonic.com/support (U.S. customers only)

CAUTION Wireless LAN connection

an amplifier/receiver . . . . . . . . . 11 If you see a message about High Dynamic

Accessories Unit and media care

 ∫ Disc handling precautions

Ultra HD Blu-ray*1*2 Video

DVD-R Video, AVCHD, MKV,

Music CD Music [CD-DA]

AVCHD, AVCHD 3D,

∫ Types of discs that cannot be played ∫ USB device

Control reference guide

∫ Reprogramming the remote control

1 Input the 2-digit code (> 36) while

1 Disc tray 4 POWER LED

Enjoying video and audio with a 4K-compatible TV

Connecting an amplifier to a 4K-compatible TV

Connecting to the network

Wireless LAN connection

Wireless router, etc. Internet

≥ For additional information about this unit refer to

LAN cable connection

Broadband router, etc.

Settings Easy Network Setting

≥ Certain recent models of Panasonic TVs

4K60p Output changed, consult the person

If your SSID is not displayed;

Search again PUSH button

Stealth SSIDs will not be displayed; in this case,

Select “Yes” to start downloading the firmware.

Encryption Key (Password)

The firmware was updated.

HOME menu Playback

1 Press [Í] to turn on the unit.

Operations during playback

Search/Slow motion Show the status messages

While paused, press [2] (2;) or [1] (;1). T1 C1 ラュンドヱヲナ

≥ Each press shows the next frame.

Enjoying Ultra HD Blu-ray Enjoying 3D video and photos

2 Connect a USB device with 1 GB or more

∫ Deleting data on the USB device

1 Insert the media.

≥ Some content may be inappropriate for viewers.

To exit from Network Service

Home Network feature Using the Digital Media Controller

You can share photos, videos and music stored in

VIERA Link Playing music continuously even

Option menu ∫ Shuffle

Pop-up Menu ∫ Video

The recording method of original video appears.

Regarding Language : (> 36) ∫ Playback Information Window (> 16)

Operation Menu ∫ Control Panel

∫ Reception ∫ Dynamic Range Conversion Adjustment

These settings are also displayed by pressing ∫ Progressive

Display Normal settings from “Auto” to “Video”.

Setup menu ∫ 24p Output

Ultra HD Blu-ray12 Video