Device Accessories: Device Programmer / Test Unit

Data Sheet
s Fire Safety Products
Device Accessories
Device Programmer / Test Unit
Models DPU, DPU-C1 and DPU-RPT
ARCHITECT AND ENGINEER SPECIFICATIONS
• Programs and addresses devices compatible with
various Siemens ─ Fire Safety control panels
• Compact and portable
• Up to four hours continuous use
on fully-charged batteries
• FLASH memory for easy download and software upgrades
• Operates with `NiMH’ rechargeable batteries
(included) or ‘AA’ Alkaline
• Auxiliary Current (AC) adaptor included
• Carrying case (DPU-C1) available, ordered separately
• Serves as a loop tester and ground-fault detector
• Works with optional label printer (DPU-RPT) to print
loop-detector addresses
• UL Listed, ULC Listed;
CSFM (#7272-0067:223 | #7300-0067:226 | #3240-0067:230) Approved Device Programmer / Test Unit
Model DPU
Product Overview Specifications
The Device Programmer / Test Unit (Model DPU) is a Each device programmer / test unit electronically
powerful programming / test tool that expedites programs the address for the device into its non-
installation of devices used on Siemens 50-point | volatile memory. Model DPU subsequently tests the
252-point | 504-point addressable systems, as well as device’s functionality, assuring the installer the device
FireFinder and MXL panels. works properly prior to installation.
A portable, compact and menu-driven component, Model DPU has a liquid-crystal display (LCD) screen
Model DPU programs addresses into FACP-compatible with keypad that prompts the installer through an
devices, and tests them to ensure proper operation easy-to-use program, and test menus that take little-
prior to installation. to-no-training for first-time users.
Prior to connecting a device circuit to the control
panel, the loop from Model DPU can be operated Model DPU is supplied with ‘NiMH’ rechargeable
(AC power must be used for this operation.) batteries and an AC power supply, and will operate in
This looping process shall allow for ground-fault either battery or AC modes. The batteries are easily
detection, as well as debugging the circuit. exchanged with off-the-shelf Alkaline (AA) batteries.
Additional orderable parts include Model DPU-RPT, To program and test a detector, simply insert the
which has a label printer and a larger carrying case detector in the integrated DB-11 base of Model DPU.
for Models DPU and DPU-PRT-CBL; as well as Model Enter the device address as prompted on the backlit
DPU-C1, which is a carrying case for the Model DPU. LCD display of Model DPU.
Device Programmer / Test Unit 6313

s Industry, Inc.
Building Technologies Division
Specifications – (continued) Details for Ordering
The address automatically increments to the next Part
address for ease of addressing multiple devices, but Model Description
Number
the user can easily insert a different address if
desired. The user also has the option of entering a DPU 500-033260 Device Programmer / Test Unit
loop number if they are printing labels at the same
time. DPU-C1 500-033990 Carrying Case
Using the optional label printer is a simple as DPU-RPT 500-034020 Larger Carrying Case and Printer
programming Model DPU to the number of labels that
are required. The labels will automatically print as
the devices are programmed, and the label maker is
operated on AC power.
There is also an option to perform a loop test;
however, Model DPU will only operate with AC power
in this mode, due to power consumption. Model DPU
will display the addresses and the device type, a
summary count of devices (by type) communicating
on that loop, and indicate addresses that have no
device and if the devices are in alarm. The operator
can also use Model DPU to detect ground faults on
the device loop.
Model DPU is backward compatible for use with MXL
devices. A simple menu selection moves you to the
MXL mode, and allows for device testing and
programming. Model DPU does not perform loop and
ground-fault tests in the MXL mode; this feature only
works for H-series of FireFinder XLS devices.
Model DPU has an integral Model DB-11 base for
detector programming and testing, storage
compartment for the programming cable that is used
for other devices and comes with a DB-3 base adapter
for use with Model IL-series detectors used on MXL
systems. Also included is the power supply used for
AC operation and battery charging.
The battery compartment is easily opened for battery
replacement. The compartment contains a switch to
turn off the charging circuit when using alkaline (AA)
batteries. The Model DPU-RPT package includes a
printer and carrying case.
Notice: This marketing data sheet is not intended to be used for system design or installation purposes.
For the most up-to-date information, refer to each product’s installation instructions.
Fire Safety Fire Safety

8 Fernwood Road 1577 North Service Road
s Industry, Inc. Florham Park, NJ 07932 East Oakville, Ontario March 2017
Building Technologies Division Tel: (973) 593-2600 (SII-FS) L6H 0H6 / Canada Supersedes sheet dated 2/2012
FAX: (908) 547-6877 Printed in U.S.A. Tel: [905] 465-8000 (Rev. 3)
URL: www.usa.Siemens.com/Fire URL: www.Siemens.CA

Device Accessories: Device Programmer / Test Unit

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Device Accessories: Device Programmer / Test Unit

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Device Accessories: Device Programmer / Test Unit

Uploaded by

Copyright:

Available Formats

Data Sheet

s Fire Safety Products

Device Programmer / Test Unit 6313

Fire Safety Fire Safety

URL: www.usa.Siemens.com/Fire URL: www.Siemens.CA

You might also like