Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

74act04 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

74AC04, 74ACT04 Hex Inverter

September
2007
74AC04, 74ACT04 tm

Hex Inverter
Features General Description
■ ICC reduced by 50% on 74AC only The AC/ACT04 contains six inverters.
■ Outputs source/sink 24mA
■ ACT04 has TTL-compatible inputs

Ordering Information
Order Package
Number Number Package Description
74AC04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74AC04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74AC04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74AC04PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
74ACT04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74ACT04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74ACT04PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (PC not available in
Tape and Reel.)
All packages are lead free per JEDEC: J-STD-020B standard.

Connection Diagram Logic Symbol


IEEE/IEC

Pin Description
Pin Names Description
An Inputs
On Outputs

FACT™ is a trademark of Fairchild Semiconductor Corporation.

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0
74AC04, 74ACT04 Hex Inverter
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.

Symbol Parameter Rating


VCC Supply Voltage –0.5V to +7.0V
IIK DC Input Diode Current
VI = –0.5V –20mA
VI = VCC + 0.5V +20mA
VI DC Input Voltage –0.5V to VCC + 0.5V
IOK DC Output Diode Current
VO = –0.5V –20mA
VO = VCC + 0.5V +20mA
VO DC Output Voltage –0.5V to VCC + 0.5V
IO DC Output Source or Sink Current ±50mA
ICC or IGND DC VCC or Ground Current per Output Pin ±50mA
TSTG Storage Temperature –65°C to +150°C
TJ Junction Temperature
PDIP 140°C

Recommended Operating Conditions


The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.

Symbol Parameter Rating


VCC Supply Voltage
AC 2.0V to 6.0V
ACT 4.5V to 5.5V
VI Input Voltage 0V to VCC
VO Output Voltage 0V to VCC
TA Operating Temperature –40°C to +85°C
∆V / ∆t Minimum Input Edge Rate, AC Devices: 125mV/ns
VIN from 30% to 70% of VCC, VCC @ 3.3V, 4.5V, 5.5V
∆V / ∆t Minimum Input Edge Rate, ACT Devices: 125mV/ns
VIN from 0.8V to 2.0V, VCC @ 4.5V, 5.5V

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 2
74AC04, 74ACT04 Hex Inverter
DC Electrical Characteristics for AC
TA = +25°C TA = –40°C to +85°C
Symbol Parameter VCC (V) Conditions Typ. Guaranteed Limits Units
VIH Minimum HIGH Level 3.0 VOUT = 0.1V 1.5 2.1 2.1 V
Input Voltage 4.5 or VCC – 0.1V 2.25 3.15 3.15
5.5 2.75 3.85 3.85
VIL Maximum LOW Level 3.0 VOUT = 0.1V 1.5 0.9 0.9 V
Input Voltage 4.5 or VCC – 0.1V 2.25 1.35 1.35
5.5 2.75 1.65 1.65
VOH Minimum HIGH Level 3.0 IOUT = –50µA 2.99 2.9 2.9 V
Output Voltage 4.5 4.49 4.4 4.4
5.5 5.49 5.4 5.4
VIN = VIL or VIH:
3.0 IOH = –12mA 2.56 2.46
4.5 IOH = –24mA 3.86 3.76
5.5 IOH = –24mA(1) 4.86 4.76
VOL Maximum LOW Level 3.0 IOUT = 50µA 0.002 0.1 0.1 V
Output Voltage 4.5 0.001 0.1 0.1
5.5 0.001 0.1 0.1
VIN = VIL or VIH
3.0 IOL= 12mA 0.36 0.44
4.5 IOL = 24mA 0.36 0.44
5.5 IOL = 24mA(1) 0.36 0.44
IIN (3) Maximum Input 5.5 VI = VCC, GND ±0.1 ±1.0 µA
Leakage Current
IOLD Minimum Dynamic 5.5 VOLD = 1.65V Max. 75 mA
IOHD Output Current(2) 5.5 VOHD = 3.85V Min. –75 mA
ICC (3) Maximum Quiescent 5.5 VIN = VCC or GND 2.0 20.0 µA
Supply Current
Notes:
1. All outputs loaded; thresholds on input associated with output under test.
2. Maximum test duration 2.0ms, one output loaded at a time.
3. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 3
74AC04, 74ACT04 Hex Inverter
DC Electrical Characteristics for ACT
VCC TA = +25°C TA = –40°C to +85°C
Symbol Parameter (V) Conditions Typ. Guaranteed Limits Units
VIH Minimum HIGH Level 4.5 VOUT = 0.1V or 1.5 2.0 2.0 V
Input Voltage 5.5 VCC – 0.1V 1.5 2.0 2.0
VIL Maximum LOW Level 4.5 VOUT = 0.1V or 1.5 0.8 0.8 V
Input Voltage 5.5 VCC – 0.1V 1.5 0.8 0.8
VOH Minimum HIGH Level 4.5 IOUT = –50µA 4.49 4.4 4.4 V
Output Voltage 5.5 5.49 5.4 5.4
VIN = VIL or VIH:
4.5 IOH = –24mA 3.86 3.76
5.5 IOH = –24mA(4) 4.86 4.76
VOL Maximum LOW Level 4.5 IOUT = 50µA 0.001 0.1 0.1 V
Output Voltage 5.5 0.001 0.1 0.1
VIN = VIL or VIH:
4.5 IOL= 24mA 0.36 0.44
5.5 IOL= 24mA(4) 0.36 0.44
IIN Maximum Input 5.5 VI = VCC, GND ±0.1 ±1.0 µA
Leakage Current
ICCT Maximum ICC/Input 5.5 VI = VCC – 2.1V 0.6 1.5 mA
IOLD Minimum Dynamic 5.5 VOLD = 1.65V Max. 75 mA
IOHD Output Current(5) 5.5 VOHD = 3.85V Min. –75 mA
ICC Maximum Quiescent 5.5 VIN = VCC or GND 4.0 40.0 µA
Supply Current
Notes:
4. All outputs loaded; thresholds on input associated with output under test.
5. Maximum test duration 2.0ms, one output loaded at a time.

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 4
74AC04, 74ACT04 Hex Inverter
AC Electrical Characteristics for AC
TA = +25°C, TA = –40°C to +85°C,
CL = 50pF CL = 50pF
Symbol Parameter VCC (V)(6) Min. Typ. Max. Min. Max. Units
tPLH Propagation Delay 3.3 1.5 4.5 9.0 1.0 10.0 ns
5.0 1.5 4.0 7.0 1.0 7.5
tPHL Propagation Delay 3.3 1.5 4.5 8.5 1.0 9.5 ns
5.0 1.5 3.5 6.5 1.0 7.0
Note:
6. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V.

AC Electrical Characteristics for ACT


TA = +25°C, TA = –40°C to +85°C,
CL = 50pF CL = 50pF
Symbol Parameter VCC (V)(7) Min. Typ. Max. Min. Max. Units
tPLH Propagation Delay 5.0 1.0 6.0 8.5 1.0 9.0 ns
tPHL Propagation Delay 5.0 1.0 5.5 8.0 1.0 8.5 ns
Note:
7. Voltage range 5.0 is 5.0V ± 0.5V.

Capacitance
Symbol Parameter Conditions Typ. Units
CIN Input Capacitance VCC = OPEN 4.5 pF
VCC Power Dissipation Capacitance VCC = 5.0V 30.0 pF

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 5
74AC04, 74ACT04 Hex Inverter
Physical Dimensions
Dimensions are in millimeters unless otherwise noted.

Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 6
74AC04, 74ACT04 Hex Inverter
Physical Dimensions (Continued)
Dimensions are in millimeters unless otherwise noted.

Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M14D

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 7
74AC04, 74ACT04 Hex Inverter
Physical Dimensions (Continued)
Dimensions are in millimeters unless otherwise noted.

Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC14

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 8
74AC04, 74ACT04 Hex Inverter
Physical Dimensions (Continued)
Dimensions are in inches (millimeters) unless otherwise noted.

Figure 4. 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N14A

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 9
74AC04, 74ACT04 Hex Inverter
TRADEMARKS
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx® Green FPS™ Power247® SuperSOT™-8
Build it Now™ Green FPS™ e-Series™ POWEREDGE® SyncFET™
CorePLUS™ GTO™ Power-SPM™ The Power Franchise®
CROSSVOLT™ i-Lo™ PowerTrench®
CTL™ IntelliMAX™ Programmable Active Droop™
Current Transfer Logic™ ISOPLANAR™ QFET® TinyBoost™
EcoSPARK® MegaBuck™ QS™ TinyBuck™
®
MICROCOUPLER™ QT Optoelectronics™ TinyLogic®
Fairchild® MicroFET™ Quiet Series™ TINYOPTO™
Fairchild Semiconductor® MicroPak™ RapidConfigure™ TinyPower™
FACT Quiet Series™ MillerDrive™ SMART START™ TinyPWM™
FACT® Motion-SPM™ SPM® TinyWire™
FAST® OPTOLOGIC® STEALTH™ µSerDes™
FastvCore™ OPTOPLANAR® SuperFET™ UHC®
®
FPS™ SuperSOT™-3 UniFET™
FRFET® PDP-SPM™ SuperSOT™-6 VCX™
Global Power ResourceSM Power220®

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS
PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.

LIFE SUPPORT POLICY


FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support,
which, (a) are intended for surgical implant into the body or device, or system whose failure to perform can be
(b) support or sustain life, and (c) whose failure to perform reasonably expected to cause the failure of the life support
when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.

PRODUCT STATUS DEFINITIONS


Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In Design This datasheet contains the design specifications for product
development. Specifications may change in any manner without notice.
Preliminary First Production This datasheet contains preliminary data; supplementary data will be
published at a later date. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice to improve
design.
Obsolete Not In Production This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor. The datasheet is printed for
reference information only.
Rev. I31

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com


74AC04, 74ACT04 Rev. 1.0 10

You might also like