Radial Fans

GmbH Lufttechnik Dresden
USER INFORMATION
RADIAL FANS
SERIES VRE 100 ... 560
direct driven
Issue 09/06
Radial fans of plastic materials
Series VRE VRE 100 ... 560
direct driven
Application in all ranges of ventilation
High chemical resistivity by the use of plastic materials

(PVC, PPs, PE, PVDF,GfK, electrically conductive plastic)
High efficiency and little noise emission
Volumetric flow up to 36 000 m3/h

Pressure increase up to 3 300 Pa
Capacity gradation by nine sizes and two versions
Housing positions left and right (L and R)
Explosion-proof versions according to European Directive 94/9/EG (ATEX)
Varied casing connectors
Many electrical and ventilation accessories

i_vre_en (09/06)
Data specified herein are subject to alteration without prior notice.

They will not be valid without written confirmation by the manufacturers.
Series VRE direct driven
Technical explanation
base
intake socket impeller

motor
motor fastening
elastic connection adapter ring
hub protection cap
with tensioning tape impeller fastening vibration absorbers
casing
condensate drain
APPLICATION
High resistance to corrosion resulting from the use of high-quality plastic materials makes the radial fans of type VRE
suitable in particular for process exhausting devices in the chemical and pharmaceutical industries, for ventilating
laboratories, battery rooms, pickling and washing plants, galvanic and agricultural facilities etc.
TECHNICAL DESCRIPTION
Main components of the fans are the impeller, spiral casing, casing connections, base, and driving motor. The motor is
flange-connected directly to the base and completely separated from the flowing medium. The impeller has been arranged
on the motor shaft and is driven directly. Steel components - such as screws, hub and hub connections - are made of acid-
resistant steel or protected against corrosion by plastic coverings.
The aerodynamic design of the fans is state-of-the-art so that high efficiency, low sound levels, and high performance
density can be achieved.
Every fan is supplied as a complete assembly unit ready for use. Vibration absorbers matched in size and quantity, elastic
connections on the pressure and suction sides, and a condensate drain bore with closing cap are elements of the standard
range of delivery.
Design features
Impeller: There are two impeller designs covering a wide range of performance:
Type 731 with vanes curved backward
Type 734 with vanes curved forward
Special impellers are used for special applications. Impellers with vanes in radial arrangement, for instance,
are advantageous if the medium conveyed contains intensely sticking substances.
The impellers are made of single components and assembled with progressive joining methods. Dynamic
balancing complies with ISO 1940.
Materials: PVC, PPs, PVDF, FRP (for high demands), electrically conductive plastic material (explosion-proof fans)
Casing: The casings are made of deep-drawn half shells (sizes 100 … 250 made of PVC or PPs) or even side walls
and a jacket which are tightly welded. The connection diameter on the suction side is in any case identical with
the nominal size of the fan. The casing can be opened on the suction side for cleaning. A condensate drain has
been arranged in deepest position.
Sealness of the shaft lead-through that is sufficient for many applications results from the vanes with far end
arrangement. Higher demands on sealness are met by an additional seal between impeller and casing (see
section Shaft seal).
A shatter guard or an additional FRP reinforcement should be arranged for cases of high demands on safety.
A wide range of casing connections is available for connecting ventilation lines.
Note: Connected plant components must not load the fan mechanically.
Materials: PVC, PPs, PVDF, FRP (for high demands), electrically conductive plastic material (explosion-proof fans)
Base: Robust welded design of zinc-coated sheet steel, optionally available: varnished or of stainless steel.
Motors: Standard motor: 3 ~ 400 V/ 50 Hz, degree of protection IP 54, design B 5 (in special cases B 14 or B 3)
Single-phase motors 230 V/ 50 Hz, motors with special voltages and different degree of protection, pole-
changing and explosion-proof motors
i_vre_en (09/06)
Motors with thermal winding protection (PTC resistor) --> special design TS
Motors with integrated frequency inverter --> special design MFU
03
MIETZSCH GmbH Lufttechnik Dresden Großenhainer Str. 137 01129 Dresden Fax (0351) 8 58 00 74 http://www.mietzsch.de
CONDITIONS OF USE
permissible ambient temperature: -30 °C … 40 °C (EX motors -20 °C ... 40 °C)
permissible temperature of medium conveyed: -30 °C … 40 °C
Higher temperatures depend on the design size, material, and speed rate and are subject to consultation with the
manufacturers.
The applied materials have good chemical resistance against many substances. It should be considered, however, that
evens plastic materials are attacked by certain chemicals. This depends on the following items:
Chemical composition and concentration of medium conveyed
Temperature and time of action
Mechanical loading and residual stress resulting from processing
Many applications in fields such as laboratories and stockrooms for chemicals, in agriculture and damp-loaded processes
led to good results with "standard materials" such as PVC or PPs that can be used without any problem in most cases.
Critical applications may occur in the process-technological industry - surface refinement, pickling plants, process exhaust
air in microelectronics.
For selection of suitable materials the purpose of use of the fan and the type of medium conveyed should be
specified in requests or orders.
Slightly dust-laden media can also be conveyed but lead to increased wear.
Notes on outdoor use: If possible, fans should not be exposed to intense ultraviolet radiation.
The motor should be protected by a weather hood.
Ambient conditions have to be considered in material selection.
Working range: The fans show stable operation in the entire range of the characteristic shown. Operation with smaller
volume flows is possible but very ineffective. Use with larger volume flows may lead to motor overload
(type 734 in particular) and must be avoided.
Parallel arrangement: of type 731 is possible in any case, of type 734 after consultation with the
manufacturers only.
Series arrangement: requires the manufacturers' agreement (increased casing pressures).
SHAFT SEAL
Radial fans VRE with standard design have vanes in far end arrangement and formed on the rear hub protection cap. This
means permanent intake of external air through the minimized gap of the shaft lead-through if
pressure loss on suction end is greater that one third of total pressure loss.
This is the reason why components with high pressure losses such as washers, filters, separators etc. should be arranged,
whenever possible, before the fan, i.e. on the suction side.
casing wall A shaft seal is used if this "aerodynamic casing sealing" is

counter-runway not sufficient. This may happen if, for instance, there is the
risk of aggressive gas escaping with the fan at rest.
The hub body of special design GD carries a sealing ring
with axially acting flexible sealing lip.
The counter-runway in the casing wall consists of a material
with good sliding properties (stainless steel or a special
plastic material, the latter in cases of action of hydrochloric
acid, chromic aid, hydrofluoric acid etc.).
sealing ring This seal is used for high demands on gastightness and in
cases of relatively dry outlet air. It is distinguished by its long
impeller hub service life.
There are various special seals such as gas shutoff seals,
labyrinth seals etc. for very high demands on tightness, in
particular in cases of high humidity and much condensate.
The manufacturers should be contacted for such
applications.
SPECIAL DESIGNS and ACCESSORIES (more details at the end of this brochure)
Cleaning opening, shatter guard, weather hood for motor, various connections for condensate drain, base of stainless
steel, intake and outlet protective grating
i_vre_en (09/06)
Ventilation components: ducts, elbows, flaps, air hoods, pipe and profiled silencers
Electrical accessories: repair switches, motor protection switches, pole changing switches, complete fan controls,
frequency inverters (also with pressure and volumetric flow regulation), air flow monitoring.
04
EXPLOSION PROTECTION
Guideline 94/9/EG (ATEX) newly regulates explosion protection for non-electrical devices from July 1, 2003. In addition to
observation of design and safety instructions according to DIN EN 14986 and DIN EN 13463, the fan has to be assigned
exactly to the relevant degree of protection and labelled accordingly. The manufacturers have to prove conformity.
Areas with hazard of explosion exist in the chemical industry, in gasworks, coking plants, varnishing units, petrol stations,
sewage and wastewater treatment plants, laboratory systems etc.
Prerequisites of explosion are:
Flammable substances (such as gas, dust),
Oxygen in sufficient quantity of air
Ignition source (sparks, fire, hot surfaces, electrostatic discharges)
The following measures have to be taken if explosions cannot be excluded:
Prevention of explosible atmosphere
Avoidance of ignition sources
Moderation of damaging effects of explosions
An efficient and supervised ventilation system is often a sufficient measure for avoiding ignitable atmosphere and,
consequently, hazard of explosion.
Protection demands on a fan depend on the probability of occurrence of explosible atmosphere in the medium conveyed
or/and in the surrounding. Hazard is classified in three zones:
Explosions Hazard Avoidance of Category

hazard zone ignition sources acc. to ATEX
continuous zone 0 even in the event of 1
long periods rare incidents
likely zone 1 even in the event of 2
to occur frequent disturbances/faults
infrequently zone 2 during normal operation 3
short period
The plant operator or the relevant board of control has to decide which protection is necessary and which additional
regulations have to be considered. This means that the customer has to specify in the order which kind of protection the fan
has to have.
Fans VRE are supplied for the following types of ignition protection:
Zone 1: II 2G c IIB+H2 T3
Zone 2: II 3G c IIB+H2 T3
temperature class T3 (ignition temperature of gas > 200 °C)
explosion group of gases IIB+H2 (IIA and H2 included, IIC not included)
constructional safety
category (2G = gases of zone 1, 3G = gases of zone 2)
Equipment-group II (use in mining not permissible)
On principle, application in zone 0 is not possible. Gases of explosion group IIC (hydrogen excluded), gases with ignition
temperature below 200 °C, and combustible dusts are likewise impermissible.
Classification generally differentiates between inside (medium conveyed) and outside (surrounding). Every zone of hazard
requires its special design. Explosion-proof electrical devices (motors, switches etc.) and electrically conductive materials
(preferably conductive and flame retardant polypropylene --> PPsX) are employed. General classification is as follows:
Hazard zone MIETZSCH Motor Impeller/housing

inside outside designation without inverter with inverter material
zone 2 zone 2 Z2Z2 EEx e II EEx de not conductive
zone 2 none Z2Z3 EEx e II standard not conductive
zone 1 zone 1 Z1Z1 EEx e II EEx de conductive
zone 1 zone 2 Z1Z2 EEx e II EEx de conductive
Special demands for operation with frequency inverter

i_vre_en (09/06)
Motors with increased safety EEx e II must not be used in inverter operation. Motors EEx de with flameproof enclosure can
be employed in inverter mode if they are equipped with special winding protection (special design TS15). Standard motors
can be used and operated in inverter mode if the surrounding is not an EX zone and the fan meets certain design demands.
05
EXPLANATION OF TYPE DESIGNATIONS
VRE 250 / 731 W 1450 - TS - GD - 090 L - PE/PPs
Fan (radial, one suction side)
Nominal size (inlet diameter /mm)
Impeller type
731 - curved backward
734 - curved forward
(special disigns of impeller types)
Direct drive
Nominal speed rpm

(higher speed in cases of pole-changing motors)
Brief designation of special versions

E = single-phase drive
TS = with thermal winding protection (thermistor)
P1 = pole-changing motors with speed halving (Dahlander)
such as 1450 P1 = 1450/710 rpm
P2 = pole-changing motors with Separate windings
such as 1450 P2 = 1450/950 U/min (changeover to next smaller speed)
EX = with motor increased safety EEx e II T3
EXde = with motor flameproof enclosure EEx de IIC T4
ZiZo = explosion-proof fan for zone i=inside and o=outside
such as Z1Z2 = inside zone 1 and outside zone 2
GD = gastight (with shaft sealing)
GDS = high gastight casing for humid media with condensate
DD = motor in delta connection for frequency inverter 3x230V
(in case of mounted repair switch)
Housing positions (view from intake side)
Material (casing/impeller)
PERFORMANCE PARAMETERS
All performance parameters are determined on MIETZSCH-own test racks. The design corresponds to DIN 24 163. The
volumetric flow is determined from the differential pressure by means of a measuring nozzle according to EN ISO 5167 .
In cases of radial fans that are destined to be arranged within a plant, the total pressure difference ∆pt results from
∆pt = pt D - pt S = ( pstat D + ρ/2 * cD2 ) - ( pstat S + ρ/2 * cS2 )

This size corresponds to the usable total pressure losses on the suction side (S) and the pressure side (D).
If area of inlet and outlet are equal total pressure difference is identically to static pressure difference
∆pt = pstatD - pstatS = ∆pstat
In praxis a pressure difference diminished by the dynamic pressure is often used. This size corresponds to the pressure
difference for free blowout ∆pfa which is used for roof fans:
∆pfa = ∆pt - ρ/2 * cD2 (to designate it static pressure difference is incorrect)
Duct sound power level LWA

The measuring method for determination of the duct sound power level is specified in DIN 45 635, Part 9. Interpretation is
according to
LWA = Lvalue measuredt + 10 * log ( π / 4 * D2 ) dB D = diameter of measuring line

Sound pressure level L3m
Several measuring points are arranged on an enveloping surface around the fan. Conversion to the specified level at 3
meters is calculated from
i_vre_en (09/06)
L3m = Lvalue measuredt + 20 * log ( rm / 3m ) dB
06
HOUSING POSITIONS (view from inlet side)

All fans are available in direction of rotation L (left)
und R (right) and in 6 different housing positions.
Changing the position of the casing after

0L 45L 90L 135L 180L 225L
manufacturing is complicated. Please consult the
manufacturer.
0R 45R 90R 135R 180R 225R
SURVEY OF TYPES - PRESELECTION

4000
3000
VRE 731
2900 U/min
2000 1450 U/min
impeller with backward
950 U/min curved vanes
710 U/min
315
560
1000
500
250
∆pt / Pa
450
400
200
500
400
160
300 direction of rotation left
200
100
ße
100
g rö
nn
Ne
Bezugsdichte des Förder-

50 mediums ρ = 1,2 kg/m³
30 .
50 100 200 300 500 1000 2000 3000 5000 10000 20000 30000 V / m³/h
4000
3000
VRE 734
400
200
2000
2900 U/min impeller with forward
1450 U/min
950 U/min
560 curved vanes
315
710 U/min
160
500
1000 450
250
∆pt / Pa
100
500
400
ße
direction of rotation left

grö
300
nn
Ne
200
Bezugsdichte des Förder-

mediums ρ = 1,2 kg/m³
100
i_vre_en (09/06)
80 .
50 100 200 300 500 1000 2000 3000 5000 10000 20000 30000 V / m³/h
07
Radial fans of plastic material
VRE 100 / 731
Impeller with backward curved vanes
PERFORMANCE
1400 Working range
1000
- stable regime in entire characteristic
range
∆pt / Pa - fan can be operated beyond

characteristic specified
500 - parallel connection possible, series
connection after consultation with the
400
manufacturers
2900 U/min
300
Design features
200 - welded impeller with 8 vanes curved

backward
,75
- casing
=0
deep-drawn for PVC or PPs

ax
welded for special materials

ηm
100
1450
- motor outside the flow conveyed
- robust sheet metal base, zinc-coated
- vibration absorbers in range of
50
delivery
ρ = 1,2 kg/m³ - variant connectors of casing

30
.
50 100 200 300 400 500 1000 V / m³/h
.
0,02 0,03 0,05 0,1 0,2 V / m³/s
max.570
PRINCIPAL DIMENSIONS
165
(made of PVC or PPs )
The principal dimensions refer to elastic Ø 110 119 120
connectors on inlet and outlet and for
housing position 90R.
Height of axis is identical for all housing
positions.
205
Further dimensions see page 26.

For special materials see page 28.
Ø 110
Number of vibration absorbers : 4
Drawings in format dxf

144
--> MIETZSCH-CD
240
198 204
20
MOTOR VERSIONS for standard motor 3~400V/50Hz

(Data for other motors, such as single-phase, polechanging or Ex, upon inquiry.)
power nom. motor nom. motor weight
fan type speed required power current with motor LA3m LWA octave-band LWA-Okt / dB(A)
rpm kW kW A kg dB(A) dB(A) 63 125 250 500 1000 2000 4000 8000
VRE 100/731W1450 1450 0,0045 0,12 0,42 9,5 45 62 39 43 58 54 54 55 44 37
VRE 100/731W2900 2900 0,035 0,18 0,51 10 51 68 52 60 62 63 61 55 46 36
LA3m = A - weighted sound pressure level at distance of 3 m
i_vre_en (09/06)
LWA = A - weighted sound power level in duct
08
VRE 100 / 734
Impeller with forward curved vanes
PERFORMANCE
1400 Working range
1000
range
∆pt / Pa - operation with larger volumetric flows

may lead to motor
500 - parallel and series connection
2900 U/min possible after consultation with the
400 ,67 manufacturers
=0
300
Design features
ax
ηm

forward
- casing
100
1450 U/min - motor outside the flow conveyed
50
delivery

30
.
50 100 200 300 400 500 1000 V / m³/h
.
0,02 0,03 0,05 0,1 0,2 V / m³/s
max.570
165
positions.
205

Ø 110

144
--> MIETZSCH-CD
240
198 204
20

VRE 100/734W1450 1450 0,024 0,12 0,42 10 45 61 42 56 56 53 56 47 39 23
VRE 100/734W2900 2900 0,17 0,18 0,51 10 54 72 57 65 67 63 67 64 51 42

i_vre_en (09/06)
09
VRE 160 / 731
PERFORMANCE
1400 Working range
1000 - stable regime in entire characteristic

2900 U/min range
,78
400
manufacturers
=0
ax
300
ηm
Design features
200
backward
- casing
100 950
50
delivery

30
.
100 200 300 400 500 1000 2000 3000 V. / m³/h
0,03 0,05 0,1 0,2 0,3 0,4 0,5 0,8 V / m³/s
max.810
266
positions.
315

Ø 160

(in case of heavy motors 6)
222

332
--> MIETZSCH-CD
310 274
20

VRE 160/731W950 950 0,014 0,09 0,44 17 39 56 39 51 46 48 50 48 33 16
VRE 160/731W1450 1450 0,045 0,12 0,42 17 44 62 44 57 53 55 56 53 43 26
VRE 160/731W2900 2900 0,31 0,37 1,0 19 60 78 57 66 68 77 70 62 59 50
i_vre_en (09/06)

10
VRE 160 / 734
PERFORMANCE
3000 Working range
2000 range
- operation with larger volumetric flows
may lead to motor
2900 U/min
- parallel and series connection
,69
1000
possible after consultation with the
=0
manufacturers
∆pt / Pa
ax
ηm
Design features
500
- welded impeller with 35 vanes curved
400 forward
300 - casing
1450 deep-drawn for PVC or PPs
200
100
950 delivery
- variant connectors of casing
ρ = 1,2 kg/m³
60
.
100 200 300 400 500 1000 2000 3000 V. / m³/h
0,03 0,05 0,1 0,2 0,3 0,4 0,5 1,0 V / m³/s
max.810
266
positions.
315

Ø 160

222

332
--> MIETZSCH-CD
310 274
20

VRE 160/734W950 950 0,08 0,09 0,44 18 44 62 43 51 51 59 55 51 40 26
VRE 160/734W1450 1450 0,25 0,25 0,76 19 52 69 54 59 58 64 66 57 50 38
VRE 160/734W2900 2900 2,2 2,2 4,6 29 63 82 59 72 72 76 78 76 70 62
i_vre_en (09/06)

11
VRE 200 / 731
PERFORMANCE
1400 Working range
2900 U/min
1000
range

,79
=0
ax
ηm
400
manufacturers
1450
300
Design features
200
backward
950 - casing
100
710
50
delivery

30
.
200 300 400 500 1000 2000 3000 5000 V / m³/h
.
0,05 0,1 0,2 0,3 0,4 0,5 1,0 V / m³/s
max.855
294
positions.
365

Ø 200

278

395
--> MIETZSCH-CD
370 306
20

VRE 200/731W710 710 0,016 0,09 0,36 26 40 57 44 49 49 52 49 43 31 22
VRE 200/731W950 950 0,036 0,09 0,55 24 45 63 46 54 54 56 57 54 41 25
VRE 200/731W1450 1450 0,121 0,18 0,58 24 51 69 52 60 61 63 62 59 50 36
i_vre_en (09/06)
VRE 200/731W2900 2900 0,968 1,1 2,40 31 67 85 61 70 75 82 78 69 64 55

12
VRE 200 / 734
PERFORMANCE
3000 Working range
2000 2900 U/min range
,70
=0
may lead to motor
ax
ηm
1000
manufacturers
∆pt / Pa
Design features
500
400 forward
300 - casing
200
950
100 delivery
710
ρ = 1,2 kg/m³
60
.
200 300 400 500 1000 2000 3000 5000 V. / m³/h
0,1 0,2 0,3 0,4 0,5 1,0 V / m³/s
max.855
294
positions.
365

Ø 200

278

395
--> MIETZSCH-CD
370 306
20

VRE 200/734W710 710 0,1 0,12 0,51 32 45 62 48 53 54 57 53 49 56 33
VRE 200/734W950 950 0,2 0,25 0,78 32 50 67 51 56 59 64 58 53 46 35
VRE 200/734W1450 1450 0,85 1,1 2,65 38 59 77 60 65 67 71 72 67 60 48
i_vre_en (09/06)
VRE 200/734W2900 2900 7,2 7,5 14,7 86 75 92 75 82 84 87 88 82 75 63

13
VRE 250 / 731
PERFORMANCE
Working range
2000 2900 U/min - stable regime in entire characteristic
range
- fan can be operated beyond
,80
1000
=0
- parallel connection possible, series
∆pt / Pa
ax
ηm
manufacturers
500 1450
Design features
400
backward
300
speed 2900rpm with FRP-impeller
950 - casing
200 deep-drawn for PVC or PPs
710
100 - robust sheet metal base, zinc-coated
delivery
ρ = 1,2 kg/m³
50
. - variant connectors of casing
300 400 500 1000 2000 3000 5000 10000 V / m³/h
.
0,1 0,2 0,3 0,4 0,5 1,0 2,0 V / m³/s
max.1015
328
positions.
415

Ø 250

346

460
--> MIETZSCH-CD
480 332
25

VRE250/731W710 710 0,05 0,09 0,36 35 42 59 44 53 50 55 52 44 30 21
VRE250/731W950 950 0,11 0,18 0,62 36 47 64 50 55 56 57 60 53 46 28
VRE250/731W1450 1450 0,37 0,37 1,03 36 55 73 59 62 68 69 66 62 56 43
i_vre_en (09/06)
VRE250/731W2900 GfK 2900 3,2 4,0 7,7 75 70 88 74 78 83 84 80 76 69 56

GfK - impeller made of fibre reinforced plastic (FRP) LA3m = A - weighted sound pressure level at distance of 3 m
14
VRE 250 / 734
PERFORMANCE
3000 Working range
2000 range
may lead to motor
1000
manufacturers
,70
∆pt / Pa 1450 U/min
=0
ax
Design features
ηm
500
400 forward
300 950 - casing

200
710
100 delivery
ρ = 1,2 kg/m³
60
.
300 400 500 1000 2000 3000 5000 V. / m³/h
0,1 0,2 0,3 0,4 0,5 1,0 1,5 V / m³/s
max.1015
328
positions.
415

Ø 250

346

460
--> MIETZSCH-CD
480 332
25

VRE 250/734W710 710 0,3 0,37 1,13 43 48 65 50 55 57 64 54 51 47 33
VRE 250/734W950 950 0,73 0,75 2,1 45 53 70 55 58 63 68 58 55 49 39
VRE 250/734W1450 1450 2,67 3,0 6,4 58 62 80 65 69 72 75 76 70 65 53
i_vre_en (09/06)

15
VRE 315 / 731
PERFORMANCE
4000 Working range
2900 U/min
range
2000 - fan can be operated beyond

,80
=0
ax
ηm
1000
manufacturers
1450
Design features
∆pt / Pa
500 backward
400
950 - welded spiral casing
300
200 710
delivery
100
ρ = 1,2 kg/m³
.
600 1000 2000 3000 5000 10000 20000 V / m³/h
.
0,2 0,3 0,4 0,5 1,0 2,0 3,0 4,0 5,0 V / m³/s
max.1155
PRINCIPAL DIMENSIONS 369
The principal dimensions refer to elastic 353 376
Ø 315
positions.
729

Ø 315

--> MIETZSCH-CD
435
605
710 490
25

(Data for other motors, such as polechanging or Ex, upon inquiry.)
VRE 315/731W710 710 0,139 0,18 0,75 60 48 65 53 59 58 60 58 53 45 38
VRE 315/731W950 950 0,354 0,37 1,2 61 53 71 59 64 65 66 64 60 56 44
VRE 315/731W1450 1450 1,25 1,5 3,45 68 62 80 65 69 75 74 72 67 62 51
i_vre_en (09/06)
VRE 315/731W2900 GfK 2900 10,2 11,0 21,4 144 77 95 81 86 91 90 87 82 76 65
16
VRE 315 / 734
PERFORMANCE
3000 Working range
2000 range
,71
may lead to motor
1450 U/min
=0
1000 - parallel and series connection
ax
ηm
manufacturers
∆pt / Pa
Design features
500 950
400 forward

710
200 - robust sheet metal base, zinc-coated
delivery
100 - variant connectors of casing
ρ = 1,2 kg/m³
60
.
500 1000 2000 3000 5000 10000 20000 V. / m³/h
0,2 0,3 0,4 0,5 1,0 2,0 3,0 4,0 5,0 V / m³/s
max.1155
Ø 315
positions.
729

Ø 315

--> MIETZSCH-CD
435
605
710 490
25

VRE 315/734W710 710 1,12 1,5 3,9 92 55 72 57 60 65 69 64 59 55 43
VRE 315/734W950 950 2,6 3,0 7,2 109 62 78 63 66 71 76 68 63 57 47
VRE 315/734W1450 1450 7,45 7,5 15,1 124 68 87 71 75 77 81 82 76 72 59
i_vre_en (09/06)

17
VRE 400 / 731
PERFORMANCE
2000 Working range
1450 U/min range

,80
∆pt / Pa
=0
ax
950 connection after consultation with the
ηm manufacturers
500
400 Design features

300
backward

100 - vibration absorbers in range of

delivery
ρ = 1,2 kg/m³
50
.
1000 2000 3000 5000 10000 20000 30000 V. / m³/h
0,3 0,4 0,5 1,0 2,0 3,0 4,0 5,0 V / m³/s
max.1335
Ø 400
positions.
867

Ø 400

--> MIETZSCH-CD
555
740
830 720
40(33)

VRE 400/731W710 710 0,46 0,55 1,58 115 55 72 59 65 69 66 62 60 57 53
VRE 400/731W950 950 1,17 1,5 3,9 122 61 79 66 70 76 73 68 65 63 58
VRE 400/731W1450 1450 4,13 5,5 11,4 148 68 86 73 76 84 80 75 72 69 60
i_vre_en (09/06)

18
VRE 400 / 734
PERFORMANCE
4000 Working range
range
,72
=0
2000 1450 U/min may lead to motor
ax
ηm
1000 manufacturers
950
∆pt / Pa Design features
500 forward
710
300
200 - vibration absorbers in range of

delivery
ρ = 1,2 kg/m³
100
.
1000 2000 3000 5000 10000 20000 30000 V. / m³/h
0,3 0,4 0,5 1,0 2,0 3,0 4,0 5,0 10,0 V / m³/s
max.1335
Ø 400
positions.
867

Ø 400

--> MIETZSCH-CD
555
740
830 720
40(33)

VRE 400/734W710 710 3,9 4,0 10,0 184 62 79 63 65 72 77 72 67 63 52
VRE 400/734W950 950 9,6 11,0 24,5 225 68 85 70 74 78 82 75 71 64 54
VRE 400/734W1450 1450 29,8 30,0 55,0 297 75 93 77 81 84 87 88 83 78 66
i_vre_en (09/06)

19
VRE 450 / 731
PERFORMANCE
3000 Working range
2000 range
1450 U/min
,80
1000
=0
ax manufacturers
∆pt / Pa 950
ηm
Design features
500
400 710 backward
300
- welded spiral casing
200
delivery
100
ρ = 1,2 kg/m³
60
.
2000 3000 5000 10000 20000 30000 V. / m³/h
0,5 1,0 2,0 3,0 4,0 5,0 10,0 V / m³/s
max.1375
positions.
974

Ø 450

--> MIETZSCH-CD
624
845
884 790
40(33)

VRE 450/731W710 710 0,87 1,1 2,9 162 57 75 62 68 72 69 65 63 60 56
VRE 450/731W950 950 2,08 2,2 5,2 167 63 81 68 72 78 75 70 67 65 60
VRE 450/731W1450 GfK 1450 7,48 7,5 15,1 196 72 90 77 80 88 84 79 76 73 64
i_vre_en (09/06)
20
VRE 450 / 734
PERFORMANCE
Working range
range
3000
may lead to motor
2000
,72
manufacturers
=0
ax
1000 950 U/min Design features
ηm
∆pt / Pa - welded impeller with 35 vanes curved

forward
710
400 - motor outside the flow conveyed

300
ρ = 1,2 kg/m³ delivery
200
.
2000 3000 5000 10000 20000 30000 V
. / m³/h - variant connectors of casing
0,5 1,0 2,0 3,0 4,0 5,0 10,0 V / m³/s
max.1375
positions.
974

Ø 450

--> MIETZSCH-CD
624
845
884 790
40(33)

VRE 450/734W710 710 7,25 7,5 17,7 226 66 83 67 69 76 81 76 71 67 56
VRE 450/734W950 950 14,5 15,0 31,5 271 71 89 74 78 82 86 79 74 68 58

i_vre_en (09/06)
21
VRE 500 / 731
PERFORMANCE
3000 Working range
2000
1450 U/min range
,80
=0
1000
ax
950 connection after consultation with the
ηm
manufacturers
∆pt / Pa
Design features
500 710
400 backward
300
200
delivery
100
ρ = 1,2 kg/m³
70
.
2000 3000 5000 10000 20000 30000 V. / m³/h
0,5 1,0 2,0 3,0 4,0 5,0 10,0 V / m³/s
max.1435
Ø 500
positions.
1079

Ø 500

--> MIETZSCH-CD
691
920
957 860
40(33)

VRE 500/731W710 710 1,42 1,5 3,9 185 59 79 67 72 75 72 69 67 64 60
VRE 500/731W950 950 3,6 4,0 9,4 195 66 85 72 75 82 80 74 72 70 65
VRE 500/731W1450 GfK 1450 13,1 15,0 28,5 250 75 93 80 83 91 87 82 79 76 67
i_vre_en (09/06)
22
VRE 500 / 734
PERFORMANCE
Working range
range
3000
may lead to motor
2000
2
0,7
=
manufacturers
ax
950 U/min
1000 ηm Design features
∆pt / Pa 710 forward
500
400
300
200
.
2000 3000 5000 10000 20000 30000 V
. / m³/h
0,5 1,0 2,0 3,0 4,0 5,0 10,0 V / m³/s
max.1435
Ø 500
positions.
1079

Ø 500

--> MIETZSCH-CD
691
920
957 860
40(33)

VRE 500/734W710 710 12,6 15,0 31,5 352 69 86 69 72 79 84 79 74 70 59
VRE 500/734W950 950 20,6 22,0 45,5 359 75 92 77 81 85 89 83 78 72 62
i_vre_en (09/06)
23
VRE 560 / 731
PERFORMANCE
4000 Working range
1450 U/min range

,80
=0
ax
950
ηm
manufacturers
1000
Design features
∆pt / Pa
500 backward
400
300
200
delivery

100
.
2000 3000 5000 10000 20000 30000 50000 V / m³/h
.
1,0 2,0 3,0 4,0 5,0 10,0 V / m³/s
max.1505
Ø 560
positions.
1151

Ø 560

--> MIETZSCH-CD
774
1040
1060 1050
40

VRE 560/731W710 710 2,6 3,0 7,6 245 63 82 68 72 78 77 71 69 67 62
VRE 560/731W950 950 6,6 7,5 17,0 270 69 88 74 78 84 83 77 75 73 68
VRE 560/731W1450 GfK 1450 23,4 30,0 55,0 367 79 97 83 86 94 90 85 82 79 70
i_vre_en (09/06)
24
VRE 560 / 734
PERFORMANCE
Working range
range
3000
may lead to motor
2
0,7
2000
=
ax
950 U/min possible after consultation with the
ηm
manufacturers
1000 Design features

710
∆pt / Pa forward
500
400
300
200
.
2000 3000 5000 10000 20000 30000 50000 V
. / m³/h
1,0 2,0 3,0 4,0 5,0 10,0 V / m³/s
max.1505
Ø 560
positions.
1151

Ø 560

--> MIETZSCH-CD
774
1040
1060 1050
40

VRE 560/734W710 710 21,0 22,0 44,5 439 73 89 72 75 82 87 82 77 73 62
VRE 560/734W950 950 36,0 37,0 70,0 592 78 95 80 84 88 92 86 81 75 65
i_vre_en (09/06)
25
VRE 100 ... 250 (PVC, PPs)
Dimensions
MAIN DIMENSIONS
Casings of sizes 100 … 250 made of PVC or PPs consist
of two deep-drawn half shells welded together.
The dimension sketch shows housing position 090R.
For other positions the manufacturers turn the casing
around the fan axis.
The smooth connection on the suction and pressure sides
has diameter d = nominal diameter.
Many connection variants are possible to meet customers'
demands.
Design version ELA, vibration isolators, and a
condensate bore with closing cap are elements of the
standard range of delivery. Other versions have to be
Casing connection-pressure side
ordered separately.
Drawings in format dxf --> MIETZSCH-CD F_ rigid connection, round
l3
flange welded on
and undrilled/drilled 1)
Casing connection - suction side
KOF_ elastic connection, round
connecting element of flexible
elastic connection, round
l2
compensator welded on
flange undrilled/drilled 1)
rigid connection, round
PVC, with band clamp

flange welded on
ELA elastic connection, round

l1
connecting element of
flexible PVC
fastened with band clamp
lmax g6 g4
c g3
Ød Ød
ELA
F_
g5
g2
Ød
g1
l3 l2 l1
h
Housing position
090R
e4 e1
hiso
e6 e5
e3
Fan dimensions
Fan size Ød c e1 e3 e4 e5 g1 g2 g3 g4 g5 g6 h hiso lmax
VRE 100 110 105 204 198 -40 50 144 109 119 120 145 178 240 20 510
VRE 160 160 141 274 310 4 60 222 168 179 194 190 264 332 20 685
VRE 200 200 169 306 370 17 70 278 210 224 240 240 330 395 20 730
VRE 250 250 203 332 480 52 110 346 264 280 298 290 412 460 25 890
Dimensions for casing connections

Fan size Ød l1 l2 l3
VRE 100 110 60 70 4 L1, I2, and I3 are functional dimensions applying
VRE 160 160 125 135 5 to the corresponding casing connection.
VRE 200 200 125 135 5 In the case of KOF, for instance, the distance fan
VRE 250 250 125 135 5
axis/flange amounts to c + I2 or g5 + I2.
1) Flanges (round) and frames (rectangular) are made according to MIETZSCH standard MWS 53030.
Drilling pattern: 0 undrilled (such as FO, KOFO)
i_vre_en (09/06)
1 drilled according to series 1 for normal applications (such as KOF1)

2 drilled according to series 2 (double number of screws) for high pressures and large quantities of
condensate (such as F2, KOF2)
26
VRE 315 ... 560
Dimensions
MAIN DIMENSIONS Casing connection-pressure side

Casings of sizes 315 … 560 consist of two even side walls a,b
h1
and one jacket welded together. R_ rigid connection, rectangular
The dimension sketch shows housing position 090R. a,b
flange welded on
For other positions the manufacturers turn the casing and undrilled/drilled1)
KOR_ elastic connection,
h2
The smooth connection on the suction side has diameter
rectangular
d = nominal diameter. The smooth connection on the
pressure side is rectangular a x b. flange undrilled/drilled 1)
Many connection variants are possible to meet customers' Ød
demands.
RSF_ rigid connection, round
h4
transition, flange welded on
standard range of delivery. Other versions have to be Ød
ordered separately.
Drawings in format dxf --> MIETZSCH-CD KOF_ elastic connection, round
transition
h6
Casing connection - suction side compensator welded on
Ød


flange welded on
transition
h5
flexible PVC
lmax g6 g4
c g3
b a
ELA
F_
g5
g2
Ød
g1
l3 l2 l1 h
Housing position
090R
e4 e6 e5 e1
hiso
e3 e2
Fan dimensions
Fan size Ød a b c e1 e2 e3 e4 e5 g1 g2 g3 g4 g5 g6 h hiso lmax
VRE 315 315 288 300 244 425 490 710 120 120 435 324 353 376 354 527 605 25 1030
VRE 400 400 370 380 284 540 720 830 160 130 555 412 446 479 442 666 740 40(33) 1210
VRE 450 450 416 429 329 540 790 884 185 140 624 464 503 539 499 751 845 40(33) 1250
VRE 500 500 455 464 346 580 860 957 202 150 691 514 562 596 554 835 920 40(33) 1310
VRE 560 560 510 517 383 580 1050 1060 229 150 774 576 629 668 626 934 1040 40 1380

Fan size Ød a b l1 l2 l3 h1 h2 h4 h5 h6 l and h are functional dimensions applying to the
VRE 315 315 288 300 125 135 6 6 135 256 375 385 corresponding casing connection.
VRE 400 400 370 380 125 135 6 6 135 306 425 435 In the case of KOF, for instance, the distance fan
VRE 450 450 416 429 125 135 6 6 135 356 475 485 axis/flange amounts to c + I2 or g5 + h6.
VRE 500 500 455 464 125 135 6 6 135 406 525 535
VRE 560 560 510 517 125 135 6 6 135 406 525 535
i_vre_en (09/06)

27
VRE 100 ... 250 (special materials)
Dimensions
MAIN DIMENSIONS Casing connection-pressure side

In case of special materials (PE, PVDF, electrically a,b
h1
conductive materials) casings of sizes 100 … 250 consist R_ rigid connection, rectangular
of two even side walls and one jacket welded together. a,b flange welded on
The dimension sketch shows housing position 090R. and undrilled/drilled1)
For other positions the manufacturers turn the casing
KOR_ elastic connection,
h2
rectangular
The smooth connection on the suction side has diameter
d = nominal diameter. The smooth connection on the flange undrilled/drilled 1)
Ød
pressure side is rectangular a x b. Many connection
variants are possible to meet customers' demands.
RSF_ rigid connection, round
h4
transition, flange welded on
standard range of delivery. Other versions have to be Ød
ordered separately.
Drawings in format dxf --> MIETZSCH-CD KOF_ elastic connection, round
transition
h6
Casing connection - suction side compensator welded on
Ød


flange welded on
transition
h5
flexible PVC
lmax g6 g4
c g3
b a
ELA
F_
g5
g2
Ød
g1
l3 l2 l1
Housing position
h
090R
e4 e1
e5
iso
Fan dimensions
Fan size Ød a b c e1 e3 e4 e5 g1 g2 g3 g4 g5 g6 h hiso lmax
VRE 100 110 96 102 105 204 198 -40 50 144 109 119 120 145 178 240 20 510
VRE 160 160 144 152 141 274 310 4 60 222 168 179 194 190 264 332 20 685
VRE 200 200 180 187 169 306 370 17 70 278 210 224 240 240 330 395 20 730
VRE 250 250 226 236 203 332 480 52 110 346 264 280 298 290 412 460 25 890

Fan size Ød a b l1 l2 l3 h1 h2 h4 h5 h6
VRE 100 110 96 102 60 70 4 4 135 104 225 235 l and h are functional dimensions applying to the
VRE 160 160 144 152 125 135 5 5 135 135 255 265 corresponding casing connection.
VRE 200 200 180 187 125 135 5 5 135 155 275 285 In the case of KOF, for instance, the distance fan
VRE 250 250 226 236 125 135 5 5 135 205 325 335 axis/flange amounts to c + I2 or g5 + h6.
i_vre_en (09/06)

28
Accessories
Shatter guard SPS and SPSG

Many years of practical tests have led to a design with safe
dimensioning of the fans VRE. A breakdown can be excluded
if all conditions of use are met.
If an impermissible mode of operation cannot be prevented
safely, we recommend the use of a shatter guard of soft PVC
foil laid around the housing jacket. A threat to the surrounding
by shatters is excluded even in the case of impeller damage D
by substances sticking to the impeller or by influence of
foreign bodies, for instance.
How to order:
SPS - shatter guard of PVC foil
SPSG- shatter guard of PVC foil
with additional wire grating
More safety is possible by reinforcement of the casing jacket
with glass fibre-reinforced plastic (GRP).
cleaning opening shatter guard
(diameter Ø D )
weather guard
Weather guard for motor

The standard versions of motors are of IP 54 which means
protection against splash water from all directions. In the
case of outdoor arrangement, an additional guard against all
atmospheric influences should be used.
How to order: WS - weather guard
Cleaning opening
Cleaning of the impeller requires the fan to be taken out of Cleaning opening
the plant and the intake socket to be opened. Fan size ØD
An additional cleaning opening (see picture) is advisable for VRE 315 110
reducing maintenance in cases of larger fans and intense
VRE 400 140
soiling.
VRE 450 160
VRE 500 180
How to order: ROE - cleaning opening
VRE 560 225
Condensate drain KSS / KSV / KSF

Every fan has a condensate bore with closing cap in its Condensate drain
deepest position.
Fan size ØD
Several sockets for connection of a condensate line are
optional. VRE 100 20
VRE 160 ... 200 25
How to order: VRE 250 ... 450 32
KSS condensate socket, diameter 22 mm for hose ¾"
VRE 500 ... 560 40
KSV condensate socket with screwing fixture
seal of EDPM
KSF condensate socket with
flange ISO/DIN 2501 PN10
Ø 22 ØD ØD
i_vre_en (09/06)
KSS KSV KSF

29
Electrical accessories
Repair switch RS
The repair switch RS is used to disconnect the fan completely from the mains in
cases of repair and maintenance. This excludes the risk of accidents arising from
unauthorized activation. The switch is supplied as a separate unit or fastened and
wired on the fan.
The switch size is determined by the motor power and mains voltage.
Repair switch Switching capacity / kW

three-pole Type 3(1)x230V 3x400V 3x500V
(for single-phase and RS 20 A / HS 3,5 6,5 7,5
three-phase motors) RS 25 A / HS 7 13 11
with auxiliary contact RS 32 A / HS 8,5 15 18,5
key-locked RS 63 A / HS 18,5 37 37
degree of protection IP 65 RS 100 A / HS 30 50 65
Fan connection through a frequency inverter requires the cable connection to be

shielded.
Six-pole switches are used for pole-changing motors. Explosion-proof motors are
equipped with switches with explosion protection EEX de IICT6 according to ATEX.
Type Currant range / A

Motor protection switch MS
Every motor has to be connected to the supply system MS 1.0 0,6 ... 1,0
through a protective device with reclosing blocking. MS 1.6 1,0 ... 1,6
Protective switches of type MS are three-pole low voltage Motor protection switch MS 2.5 1,6 ... 2,5
switching appliances used for single-phase and three- three-pole MS 4.0 2,5 ... 4,0
phase motors. They protect the motor from impermissible (for single-phase and MS 6.3 4,0 ... 6,3
overload and are used simultaneously for fan activation three-phase motors) MS 10.0 6,3 ... 10
and deactivation in normal operation. degree of protection IP 54 MS 16.0 10 ... 16
The switch is supplied as a separate unit or fastened and MS 20.0 16 ... 20
wired on the fan. MS 25.0 20 ... 25
It has to be set according to the particular nominal motor MS 32.0 25 ... 32
current. MS 40.0 32 ... 40
Pole-changing motors require a switch for every speed rate. Explosion-proof motors are equipped with switches with
explosion protection EEX de IICT6 according to ATEX.
Frequency inverter FU 0.18 ... 15.0-A31

The inverter FU ... A31 permits many simple control and regulation problems to be solved in a very convenient way if its
numerous functions are utilized and some additional components added.
On this basis MIETZSCH supply individual applications such as speed setting by means of integrated potentiometer,
stepped regime, time-control activation, pressure or volume flow control and many others. The user gets a complete system
(fan, inverter, switches, signal lamps, measuring appliances, sensors etc.) which is immediately ready for operation when
the electrical connections have been made. All necessary setting and programming work is done by the manufacturers.
Example: Volume flow control with alarming if rated value is fallen below
fan
alarm device
FU ... A31 measuring orifice

i_vre_en (09/06)
with master switch with pressure transmitter

rated value potentiometer
degree of protection IP 55
30
no. quantity individual Total
specification price price
EUR EUR
Radial fans of plastic material – direct drive

Mietzsch Lufttechnik - Series VRE / W
Object:
Impeller optionally of PVC / PPs welded / FRP laminated, with balancing quality G 6.3
according to ISO 1940, fly-mounted on a shaft
Spiral casing optionally of PVC / PPs, sucking on one side, with condensate drain
Shaft seal: without seal / GD-technical gastight
Direct drive by standard motor outside the flow conveyed

Design in single-phase / three-phase / pole-changing
Motor protection: no / thermistor (TS)
Robust base,welded, for location of fan and motor

Corrosion protection: zinc-coated / painted , vibration absorbers included
Safety aquipment according to VDMA 24 167
VRE _ _ _ / _ _ _ W _ _ _ _ - _ _ - _ _ - _ _ _ _ - _ _ _ _
Nominal size
Impeller type
Nominal speed
Special version
Housing position / direction of rotation
Material casing / impeller
Volumetric flow : __________________ m3/h

Total pressure increase : __________________ Pa
Temperature of medium : __________________ °C
Motor power : __________________ kW
Voltage / Frequency : __________________ V ____ Hz
Rated motor currant : __________________ A
Fan speed : __________________ rpm
Sound level LA3m : __________________ dB(A)
Weight : __________________ kg
Media / use:
Special accessories and special equipment
Connection suction side: ELA-elastic (circular) / KOF-compensator with flange (circular)
Connection pressure side: ELA-elastic / KOF-compensator with flange
Condensate drain: drilling with cap / neck with cap or fitting
Shutter guard: PVC-foil / PVC-foil with wire screen
Cleaning opening
Repair switch: single / mounted, 3-poles with auxiliary contact / 6-poles with auxiliary switch
Motor protection switch: single / mounted

s_vre_w (07/05)
Other accessories
no. quantity individual Total
specification price price
EUR EUR
Radial fans of plastic material – direct drive

explosion-proof
Mietzsch Lufttechnik - Series VRE / W
Object:
Permitted for EX-Categorie according to EU-guideline 94/9/EG (ATEX) :
Location in category
relation to the fan gas area 1 gas area 2 no EX-area
inside II 2G c IIB+H2 T3 II 3G c IIB+H2 T3 no
outside II 2G c IIB+H2 T3 II 3G c IIB+H2 T3 no
Impeller optionally of PVC / PPs welded / FRP laminated or
electrically conductive plastic (PVCX,PPsX) welded
with balancing quality G 6.3 according to ISO 1940, fly-mounted on a shaft
Spiral casing optionally of PVC / PPs or electrically conductive plastic (PVCX,PPsX)
sucking on one side, with condensate drain
Shaft seal: without seal / GD-technical gastight
Direct drive with EX-motor outside the flow conveyed
Protection: EEXe II - increased safety
EEXde II - flameproof enclosure
Direct drive by standard motor (no EX-protection) outside the flow conveyed
Design in single-phase / three-phase / pole-changing
Motor protection: no / thermistor (TS)
Robust base,welded, for location of fan and motor
Corrosion protection: zinc-coated / painted , vibration absorbers included
Safety aquipment according to VDMA 24 167
VRE _ _ _ / _ _ _ W _ _ _ _ - _ _ - _ _ - _ _ _ _ - _ _ _ _
Nominal size
Impeller type
Nominal speed
Special version
Housing position / direction of rotation
Material casing / impeller
Volumetric flow : __________________ m3/h

Total pressure increase : __________________ Pa
Temperature of medium : __________________ °C
Ambient temperature : __________________ °C
Motor power : __________________ kW
Voltage / Frequency : __________________ V ____ Hz
Rated motor currant : __________________ A
Fan speed : __________________ rpm
Sound level LA3m : __________________ dB(A)
Weight : __________________ kg
Media / use:
Special accessories and special equipment

Connection suction side: ELA-elastic (circular) / KOF-compensator with flange (circular)
Connection pressure side: ELA-elastic / KOF-compensator with flange
Condensate drain: drilling with cap / neck with cap or fitting
Shutter guard: PVC-foil / PVC-foil with wire screen
Cleaning opening
s_vre_w_ex (07/05)
Repair switch: single / mounted, 3-poles with auxiliary contact, standard / explosion-proof
Motor protection switch: single / mounted, standard / explosion-proof
Other accessories
radial fan VRE 500
standard design
fan made of PVDF

for extreme chemical demands
installation on tanks
os scrubbers
special design GAB
fan with base

made of plastic
Our program of
products and services
Radial fans of plastic material Droplet eliminators and moisteners
Direct and belt drive
up to about 80 000 m³/h and 3 500 Pa Gas washers
for separation of gaseous dangerous substances
substances,
Explosion-proof fans dust/gas separators
according to ATEX for zone 1 and zone 2
Heat exchangers
Roof fans of all-plastic design for recovery of heat from moist and aggressive
with many assembly accessories exhaust air
Special fans Containers of PVC, PP, PE

Duct built-in devices, for liquids endangering water, according to water
mobile radial fans resources regulations, containers of composite design
PVC/GFRP, PP/GFRP
Systems for central ventilation in housing
construction, special-purpose fans, exhaust Controlling and regulating elements and systems
elements, controlling and regulating devices Switches, motor protection devices, speed controllers,
frequency inverter, fan controls, flow supervision
Complete plants of plastic materials for
industry and craft, laboratory and process Special designs of plastic materials
exhaust systems, air cleaning plants Devices, linings etc.
Ventilation components of plastic material Engineering performances

Pipes, ducts, fittings, flaps, gas-tight shutoff Planning, calculation, and design, ventilation
flaps, exhaust air heads, deflector hoods, measurement on standardized test stands, low and
exhaust hoods, filter cases, volume flow high temperature test in company-own climatic test
controller etc. chambers
Rectangular and cylindrical silencers,

silencing casings in corrosion-proof design
Großenhain BERLIN
Moritzburg COTTBUS
BAUTZEN
Dresden-Hellerau exit
Dresden Neustadt
Dresden-Neustadt
exit Dresden-Wilder Mann exit
Hubertusplatz
FRANKFURT A.M.
CHEMNITZ
LEIPZIG
GmbH Lufttechnik Dresden

Trachenberger
Platz Großenhainer Straße 137
01129 Dresden
51° 05‘ 06‘‘ N
13° 43‘ 32‘‘ O
Telefon: (0351) 8433 0
FAX: (0351) 8433 160
e-mail mietzsch@mietzsch.de
DRESDEN Dresden-city center Internet http://www.mietzsch.de

Radial Fans

Uploaded by

Copyright:

Available Formats

Radial Fans

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Radial Fans

Uploaded by

Copyright:

Available Formats

GmbH Lufttechnik Dresden

High chemical resistivity by the use of plastic materials

High efficiency and little noise emission

Volumetric flow up to 36 000 m3/h

Capacity gradation by nine sizes and two versions

Housing positions left and right (L and R)

Explosion-proof versions according to European Directive 94/9/EG (ATEX)

Varied casing connectors

Many electrical and ventilation accessories

Data specified herein are subject to alteration without prior notice.

intake socket impeller

casing wall A shaft seal is used if this "aerodynamic casing sealing" is

Explosions Hazard Avoidance of Category

Hazard zone MIETZSCH Motor Impeller/housing

Special demands for operation with frequency inverter

EXPLANATION OF TYPE DESIGNATIONS

VRE 250 / 731 W 1450 - TS - GD - 090 L - PE/PPs

Fan (radial, one suction side)

Nominal size (inlet diameter /mm)

Nominal speed rpm

Brief designation of special versions

Housing positions (view from intake side)

∆pt = pt D - pt S = ( pstat D + ρ/2 * cD2 ) - ( pstat S + ρ/2 * cS2 )

Duct sound power level LWA

LWA = Lvalue measuredt + 10 * log ( π / 4 * D2 ) dB D = diameter of measuring line

L3m = Lvalue measuredt + 20 * log ( rm / 3m ) dB

HOUSING POSITIONS (view from inlet side)

Changing the position of the casing after

0R 45R 90R 135R 180R 225R

SURVEY OF TYPES - PRESELECTION

300 direction of rotation left

Bezugsdichte des Förder-

direction of rotation left

Bezugsdichte des Förder-

∆pt / Pa - fan can be operated beyond

200 - welded impeller with 8 vanes curved

deep-drawn for PVC or PPs

welded for special materials

ρ = 1,2 kg/m³ - variant connectors of casing

Further dimensions see page 26.

Number of vibration absorbers : 4

Drawings in format dxf

MOTOR VERSIONS for standard motor 3~400V/50Hz

LWA = A - weighted sound power level in duct

∆pt / Pa - operation with larger volumetric flows

200 - welded impeller with 32 vanes curved

ρ = 1,2 kg/m³ - variant connectors of casing

Further dimensions see page 26.

Number of vibration absorbers : 4

Drawings in format dxf

MOTOR VERSIONS for standard motor 3~400V/50Hz

LA3m = A - weighted sound pressure level at distance of 3 m

LWA = A - weighted sound power level in duct

1000 - stable regime in entire characteristic

ρ = 1,2 kg/m³ - variant connectors of casing

Further dimensions see page 26.

Number of vibration absorbers : 4

Drawings in format dxf