BRUSHCAT®

ROTARY CUTTER ATTACHMENT

One Tough Animal TM

 Brushcat® Rotary Cutter
Brushcat
Specifications Rotary
Cutter
Model 60” Standard Flow 60” High Flow 72” Standard Flow 72” High Flow 72” High Flow 37 gpm Attachment
Operating Weight 1706 lb. (774 kg) 1706 lb. (774 kg) 1906 lb. (865 kg) 1906 lb. (865 kg) 1938 lb. (879 kg) fits these
Shipping Weight 1885 lb. (855 kg) 1885 lb. (855 kg) 2116 lb. (960 kg) 2116 lb. (960 kg) 2148 lb. (974 kg) Bobcat®
Cutting Capacity Brush Material up to 3 in. (76 mm) in diameter
carrier
models:
Hydraulic Flow Range 15-22 gpm (57-83 L/min.) 20-32 gpm (76-121 L/min.) 15-22 gpm (57-83 L/min.) 20-32 gpm (76-121 L/min.) 30-40 gpm (114-151 L/min.)
Motor Color White Charcoal White Charcoal Orange Skid-Steer
Loaders:
Blade Tip Speed
S150
Minimum Flow 16217 ft./min. (82.4 m/sec) 13244 ft./min. (67.3 m/sec) 15380 ft./min. (78.1 m/sec) 13244 ft./min. (67.3 m/sec) 16027 ft./min. (81.4 m/sec) S160
Maximum Flow 23785 ft./min. (120.8 m/sec) 21191 ft./min. (107.7 m/sec) 22558 ft./min. (114.6 m/sec) 21191 ft./min. (107.7 m/sec) 21369 ft./min. (108.6 m/sec) S160H
Cutting Width 60 in. (1524 mm) 60 in. (1524 mm) 72 in. (1829 mm) 72 in. (1829 mm) 72 in. (1829 mm) S175
S175H
Cutting Height 2.00 in. (50.8 mm) Standard 2.00 in. (50.8 mm) Standard 2.00 in. (50.8 mm) Standard 2.00 in. (50.8 mm) Standard 2.00 in. (50.8 mm) Standard
S185
Overall Width (A) 63.82 in. (1621 mm) 63.82 in. (1621 mm) 75.82 in. (1925.8 mm) 75.82 in. (1925.8 mm) 75.82 in. (1925.8 mm) S185H
Overall Height (B) 29.06 in. (738.1 mm) 29.06 in. (738.1 mm) 29.06 in. (738.1 mm) 29.06 in. (738.1 mm) 29.06 in. (738.1 mm) S205
Overall Length ( C ) 82.46 in. (2094.5 mm) 82.46 in. (2094.5 mm) 92.92 in. (2360.3 mm) 92.92 in. (2360.3 mm) 92.92 in. (2360.3 mm) S205H
S220
Deck Length (D) 76.00 in. (1930.4 mm) 76.00 in. (1930.4 mm) 86.50 in. (2197.1 mm) 86.50 in. (2197.1 mm) 86.50 in. (2197.1 mm)
S220H
Vertical Travel (E) 9.0 in. (228.6 mm) 9.0 in. (228.6 mm) 9.0 in. (228.6 mm) 9.0 in. (228.6 mm) 9.0 in. (228.6 mm) S250
S250H
Powerful Brush and Undergrowth Clearing! S300
Handle your tough brush-clearing applications easily with S300H
the Brushcat ® rotary cutter. It mulches small branches and S330
saplings — up to 3 inches in diameter — and cuts through S330H
the thickest grass and brush. Its powerful blades provide an
excellent cutting and mulching action while maintaining the Compact
proper power-to-blade ratio. The Brushcat rotary cutter is Track
E ideal for clearing undeveloped property, construction sites,
powerline access roads, trails, ditches, and more. It can be Loaders:
D T180
operated traveling both forward and reverse. The flotation
C linkage allows the deck to float over ground contours, keeping T180H
it in contact with the surface for optimum performance. T190
T190H
• Velocity fuse safeguards hydraulic system- If the hydraulic
T250
B capacity of the motor is exceeded, the velocity fuse—installed
on most Brushcat rotary cutter models—will shut off the T250H
hydraulic flow to the cutter and limit potential damage to T300
the system.
T300H
• Hydraulic pressure gauge indicates operating pressure of loader-
A hydraulic pressure gauge, located on the rotary cutter All-Wheel
and visible from the operator seat, indicates the operating Steer Loaders:
A pressure range of the loader. The pressure gauge ranges
are signified by green, yellow and red color codes—allowing A300
operators to monitor and maintain optimal carrier travel speed. A300H
• Patented blade shutoff- The patented blade shutoff device stops
blade rotation when the rotary cutter is raised off the ground.

• Double-edge blades provide increased blade life- Double-edge

blades provide bidirectional cutter rotation to increase blade life.
This is achieved by switching the hydraulic hoses at the drive motor.

• Hydraulic drive eliminates shear pins and drive clutches-

The hydraulic drive dampens impact loads and eliminates
the need for shear pins or drive clutches.
Front rollers allow attachment to better traverse uneven terrain
while reducing operator fatigue. Standard equipment on all • Meets SAE and ASAE standards- Bobcat Brushcat rotary cutters
Brushcat rotary cutters. comply with SAE J232 and ASAE S483 standards for industrial
rotary cutters.

The Bobcat Attachments Advantage: Bobcat

attachments are engineered and manufactured to NOTE - Where applicable, dimensions are in accordance with Society of Automotive Engineers
fit Bobcat loaders for optimum job performance, (SAE) and ISO standards. Specifications and design are subject to change without notice. Pictures of
Bobcat units may show other than standard equipment. All dimensions are given for loader equipped
dependability and durability. with standard tires. All dimensions are shown in inches. Respective metric dimensions are enclosed
by parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.

Bobcat Company
P.O. Box 6000 • West Fargo, ND 58078
www.bobcat.com
B-1697 (4/07) Printed in U.S.A. Kn-15M-407-#8325-F