Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

AC Questions Paper

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Code No: 126EK

R13
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
B. Tech III Year II Semester Examinations, May - 2017
DIGITAL SIGNAL PROCESSING
(Common to ECE, EIE)
Time: 3 hours Max. Marks: 75

Note: This question paper contains two parts A and B.


Part A is compulsory which carries 25 marks. Answer all questions in Part A. Part B
consists of 5 Units. Answer any one full question from each unit. Each question carries
10 marks and may have a, b, c as sub questions.

PART - A
(25 Marks)

1.a) What is an LTI system? [2]


b) Define the frequency response of a discrete-time system. [3]
c) Define discrete Fourier series. [2]
d) Obtain the circular convolution of the sequence x(n)={1,2,1}; h(n)={1,-2,2}. [3]
e) What is meant by bilinear transformation? [2]
f) Prove that physically realizable and stable IIR filters cannot have linear phase. [3]
g) What are the disadvantages of Fourier Series Method? [2]
h) What is the desirable characteristics of the Window? [3]
i) What is the need for anti-imaging filter after up sampling a signal? [2]
j) What are the effects of Dead band? [3]

PART - B
(50 Marks)

2.a) Determine whether each of the following systems defined below is (i) Causal (ii) Linear
(iii) Dynamic (iv) Time invariant (v) Stable.
n
(I) y (n)  e
k  n 3
x(k )
(II) y(n)  x(n  2)

b) For each impulse response listed below, determine whether the corresponding system is
(i) causal (ii) stable. [5+5]
(I) h(n)  2 u(n)
n
(II) h(n)  e u(n  1)
2n

OR
3.a) If x(n) is a causal sequence, find the z- transform of the following sequences.
(i) x(n)  nu(n) (b) x(n)  nu(n  1)
b) Find the response of y(n)  y(n  1)  2 y(n  2)  u(n  1)  2u(n  2) due to
y(1)  0.5; y(2)  0.25 . [5+5]

4.a) Compute the DFT of the square-wave sequence


 N
 1 0  n  2 1
x ( n)   Where N is even.
N
 1  n  N 1
 2 www.ManaResults.co.in n
1
b) Find 4-point DFT of the following sequence x(n)    . [5+5]
4
OR
5.a) An 8-point sequence is given by x(n)  2,2,2,2,1,1,1,1 .Compute 8-point DFT of x(n)
by radix-2 DIT-FFT.
n
b) Compute the DFT of the sequence x(n)  cos , where N=4 using DIF FFT
2
algorithm. [5+5]

6. Design a chebyshev filter for the following specifications using (a) bilinear
transformation. (b) Impulse Invariance method. [10]
 
0.8  H e  1 0  w  0.2
jw

H e   0.2
jw
0.6  w  
OR
7.a) Design a lowpass filter that will operate on the sampled analog data such that the cutoff
frequency is 200Hz and at 400Hz, the attenuation is atleast 20dB with a monotonic
1
shape past 200Hz. Take T = secs and use normalized lowpass filter.
2000
b) A third-order Butterworth low pass filter has the transfer function:
1
H ( s)  . Design H(z) using Impulse Invariance method. [5+5]
( s  1)( s 2  s  1)

8.a) Design an ideal Hilbert transformer having frequency response


 j for    w  0
 
H e jw   ; using rectangular window.
 j for 0  w  
b) For the desired frequency response given by
  j 3w 3
e , w 
H d ( w)   4
3
 0,  w 
 4
Find H(ω) for N=7 using Hamming window for truncating hd(n). [5+5]
OR
9.a) Design an FIR digital filter H(z) that when used in the prefilter A/D -H(z) – D/A
structure will satisfy the following equivalent analog specifications.
i) Low pass filter with -1dB cutoff at 100π rad/sec.
ii) Stop band attenuation of 35dB or greater at 1000π rad/sec.
iii) Sampling rate of 2000 samples/sec.
iv) The phase must be linear.
b) Draw the magnitude response, W ( ) versus ω, for nine-term windows of the following
i) Rectangular window ii) Hanning window. [6+4]

10.a) Explain the application of sampling rate conversion in subband coding.


b) Discuss in detail the down sampling with a neat diagram. [5+5]
OR
11.a) Explain the multistage implementation of sampling rate conversion.
www.ManaResults.co.in
b) Explain the finite word length effects in digital filter. [5+5]

---ooOoo---

You might also like