Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
221 views

DSP Assignment

This document appears to be an assignment for a digital signal processing course. It consists of two questions worth a total of 20 marks. Question 1 (10 marks) involves designing a linear phase FIR bandpass filter with a window of duration M=7 and stopband attenuation between 30-70 dB. Students are asked to identify the appropriate window type, prove the symmetry condition for linear phase FIR filters, and determine the transfer function. Question 2 (10 marks) involves designing a digital filter to remove drone frequencies between 2.4-5.4GHz from a signal captured at a football match. Students are asked to identify an appropriate filter, comment on sampling frequency specifications, determine the transfer function, and obtain the

Uploaded by

Niveditha Nivi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
221 views

DSP Assignment

This document appears to be an assignment for a digital signal processing course. It consists of two questions worth a total of 20 marks. Question 1 (10 marks) involves designing a linear phase FIR bandpass filter with a window of duration M=7 and stopband attenuation between 30-70 dB. Students are asked to identify the appropriate window type, prove the symmetry condition for linear phase FIR filters, and determine the transfer function. Question 2 (10 marks) involves designing a digital filter to remove drone frequencies between 2.4-5.4GHz from a signal captured at a football match. Students are asked to identify an appropriate filter, comment on sampling frequency specifications, determine the transfer function, and obtain the

Uploaded by

Niveditha Nivi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Faculty of Engineering and Technology

Ramaiah University of Applied Sciences


Department Electronic and Communication Programme B.Tech
Engineering
Semester 5
Course Code ECC302A Course Title Digital Signal Processing
Course Leader Mrs. Vasanthavalli.S

Assignment-1
Reg.No. Name of Student

Marks
Sections

Marking Scheme First

Marks
Max
Examiner Moderator
Marks

A1.1 Significance of the windows 04


Part A1

A1.2 Analysis and Comparison 04


A1.3 Justification and conclusion 02
A1 Max Marks 10

A2.1 Identification and Justification of the filter choice 03


A2.2 Sampling frequency specification comments 03
Part A2

A2.3 Transfer function of the filter 01


A2.4 Magnitude and phase response of the filter 03

A2 Max Marks 10

Total Assignment Marks 20

Course Marks Tabulation

Component-1 (B) First


Remarks Moderator Remarks
Assignment Examiner
A1

A2

Marks (out of 20 )

Signature of First Examiner Signature of Moderator

1
Please note:
1. Documental evidence for all the components/parts of the assessment such as the reports,
photographs, laboratory exam / tool tests are required to be attached to the assignment report
in a proper order.
2. The First Examiner is required to mark the comments in RED ink and the Second Examiner’s
comments should be in GREEN ink.
3. The marks for all the questions of the assignment have to be written only in the Component –
CET B: Assignment table.
4. If the variation between the marks awarded by the first examiner and the second examiner lies
within +/- 3 marks, then the marks allotted by the first examiner is considered to be final. If the
variation is more than +/- 3 marks then both the examiners should resolve the issue in
consultation with the Chairman BoE.

Assignment-1

Instructions to students:
1. The assignment consists of 2 questions, maximum mark is 20.
2. The assignment has to be neatly word processed as per the prescribed format.
3. Restrict your report for maximum of 6 pages.
4. The printed assignment must be submitted to the course leader.
5. Submission Date: 00/00/2019
6. Submission after the due date is not permitted.
7. IMPORTANT: It is essential that all the sources used in preparation of the assignment must
be suitably referenced in the text.
8. Marks will be awarded only to the sections and subsections clearly indicated as per the
problem statement/exercise/question

Preamble to the course

This course deals with the basic concepts of digital signal processing. It deals with the
discrete time signals and principles of discrete Fourier transform techniques. Students are
taught Fourier transforms as applied to discrete signals, digital filter design techniques, and
IIR and FIR structures. The concepts of finite word length effects in digital signal
representation and multirate signal processing are explained. Students are taught to
design simple digital systems based on analysis of system response.

2
A1. (10 marks)
Design a linear phase FIR band pass filter having duration of M=7. Use the window with stopband
attenuation of 30-70 dB. Hd (𝜔) represents the ideal characteristic of the non-causal bandpass
filter as shown in figure 1.

Figure 1: Ideal bandpass magnitude response


A1.1 Identify the type of window to be used and state the reason for your choice.
A1.2 Prove the symmetry condition for linear phase FIR filter.
A1.3 Determine the transfer function of FIR filter.

A2. (10 marks)


The operating frequency of the drone used for capturing signals in a football match is in the range
of 2.4 − 5.4 GHz. Design a digital filter to remove drone frequencies for broadcasting. (Use
MATLAB fdatool)
A2.1 Identify a filter and justify the choice for captured signal.
A2.2 Comment on the specification related to sampling frequency.
A2.3 Determine the transfer function of the filter.
A2.4 Obtain the magnitude and phase response of the filter.

Note: Contact the course leader regarding other specifications.

You might also like