S4850G1
S4850G1
S4850G1
S4850G1
Introduction
Overview of
S4850G1
Features
Scenarios
Page 1 of 3
Feature Curve
100%
Output voltage / V
48%
100%
100%
Power / %
80%
80%
60%
0%
-20 0 20 40 60 80
Dimension Drawings
Page 2 of 3
Specifications
Product Type S4850G1
Dimension 105 mm(W) × 281 mm(D) × 40.8 mm(H)
Basic
Weight ≤ 1.85 kg
Specifications
Cooling Forced air cooling (Built-in fan)
Input Voltage 58 to 150 Vdc
Input Feature Maximum Input Current ≤ 45 A
Maximum Input Power 3100 W
> 98% (50% to 100% load)
Peak Efficiency
> 98.2% Max
MPPT Tracking Precision ≥ 99.8%
Output Voltage 43.2 to 58 Vdc, rated voltage: 53.5 Vdc
Maximum Output Power 3000W
Output Feature Maximum Output
52 A
Current
Ripple and Noise ≤ 200 mV (Pk-Pk, 20 M bandwidth)
Telephone Weighing
≤ 2 mV
Noise
Output Regulated
≤ 0.6%
Voltage Precision
-20 ℃ to +75 ℃ (non-derating under 55 ℃),
Operating Temperature
@ -40 ℃, S4850G1 can startup @-40 ℃ with light load(20%) after heating for 20 minutes
Storage Temperature -40 ℃ to +70 ℃
Environmental
Specifications Relative Humidity 0% to 95% (non-condensing)
≤ 4000 m (If the altitude is within the range of 1800m to 4000 m, the maximum operating
Altitude Range
temperature decreases by 1℃ as the altitude increases by 200 m)
Input Overvoltage
Protection threshold: 155 Vdc
Protection
Output Over-voltage
Protection threshold: 58.5 Vdc
Protection
Protection
Output Short Circuit The module is in good condition after a long-term short circuit. The module output resumes after
Protection the short circuit is rectified.
Over-temperature If over-temperature occurs, the module is shut down. When the temperature near the vent is less
Protection than 70°C, the module is enabled.
Reliability MTBF ≥300,000 hours, at an ambient temperature of 25°C
Audible Noises Specification ≤55dB (25 ℃, full load); sound presure@1m distance
Lightening protection Common model(input to earth) / differential model (input to input): 5KA (8/20uS)
Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved. HUAWEI TECHNOLOGIES CO., LTD.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Huawei Industrial Base
General Disclaimer Bantian Longgang
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating Shenzhen 518129, P.R. China
results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially
from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an Tel: +86-755-28780808
offer nor an acceptance. Huawei may change the information at any time without notice.
www.huawei.com
Page 3 of 3