OWNER’S MANUAL

Safety and Reference

LED TV*
* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and retain
it for future reference.
43UF7590 60UF7650 60UF7700 55UF8500 55UF9500
49UF7590 65UF7650 65UF7700 60UF8500 65UF9500
55UF7590 70UF7650 70UF7700 65UF8500
40UF7600 60UF7690 79UF7700
43UF7600 65UF7690
49UF7600 70UF7690
55UF7600 79UF7690

*MFL68741502* www.lg.com
P/No : MFL68741502 (1501-REV01)
 Important Safety Instructions Read these instructions.
Keep these instructions.
Always comply with the following precautions Heed all warnings.
to avoid dangerous situations and ensure peak Follow all instructions.
performance of your product.
••Do not use this apparatus near water.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK ••Clean only with dry cloth.
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is ••Do not block any ventilation openings. Install in
intended to alert the user to the presence of accordance with the manufacturer’s instructions.
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an ••Do not install near any heat sources such
equilateral triangle is intended to alert the as radiators, heat registers, stoves, or other
user to the presence of important operating apparatus (including amplifiers) that produce
and maintenance (servicing) instructions in heat.
ENGLISH

the literature accompanying the appliance.

WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. ••Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
WARNING plug has two blades with one wider than the
If you ignore the warning message, you may other. A grounding type plug has two blades
be seriously injured or there is a possibility of and a third grounding prong. The wide blade or
accident or death. the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
CAUTION consult an electrician for replacement of the
If you ignore the caution message, you may obsolete outlet.
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the ••Protect the power cord from being walked on
product safely. Please read the note carefully or pinched particularly at plugs, convenience
before using the product. receptacles, and the point where they exit from
the apparatus.

WARNING: This product contains chemicals known

to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
••Only use attachments/accessories specified by
the manufacturer.

2
••Use only with the cart, stand, tripod, bracket, or ••CAUTION concerning the Power Cord
table specified by the manufacturer, or sold with (Can differ by country):
the apparatus. When a cart is used, use caution Check the specification page of this owner’s
when moving the cart/apparatus combination to manual to be certain. Do not connect too many
avoid injury from tip-over. appliances to the same AC power outlet as this
could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked
••Unplug this apparatus during lightning storms wire insulation are dangerous. Any of these
or when unused for long periods of time. conditions could result in electric shock or fire.
Periodically examine the cord of your appliance,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
an exact replacement part by an authorized
••Refer all servicing to qualified service personnel. service. Protect the power cord from physical or
Servicing is required when the apparatus has mechanical abuse, such as being twisted, kinked,
been damaged in any way, such as power-supply pinched, closed in a door, or walked upon. Pay
cord or plug is damaged, liquid has been spilled particular attention to plugs, wall outlets, and
or objects have fallen into the apparatus, the the point where the cord exits the appliance. Do
apparatus has been exposed to rain or moisture, not move the TV with the power cord plugged
does not operate normally, or has been dropped. in. Do not use a damaged or loose power cord.
Be sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.

ENGLISH
••Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil, or
pen, or make a scratch on it. ••Warning - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles,
••Do not stick metal objects or any other or expose the TV to direct air conditioning.
conductive material into the power cord. Do
not touch the end of the power cord while it is
plugged in.
••Keep the packing anti-moisture material or
vinyl packing out of the reach of children. ••Do not expose to dripping or splashing and
Anti-moisture material is harmful if swallowed. do not place objects filled with liquids, such as
If swallowed, induce vomiting and go to the vases, cups, etc. on or over the apparatus (e.g.,
nearest hospital. Additionally, vinyl packing can on shelves above the unit).
cause suffocation. Keep it out of the reach of
children.

3
 ••Grounding ••Cleaning
(Except for devices which are not grounded.) When cleaning, unplug the power cord and wipe
Ensure that you connect the earth ground wire gently with a soft cloth to prevent scratching. Do
to prevent possible electric shock (i.e., a TV not spray water or other liquids directly on the
with a three-prong grounded AC plug must TV as electric shock may occur. Do not clean with
be connected to a three-prong grounded AC chemicals such as alcohol, thinners, or benzene.
outlet). ••Moving
If grounding methods are not possible, have Make sure the product is turned off, unplugged,
a qualified electrician install a separate circuit and all cables have been removed. It may take 2
breaker. Do not try to ground the unit by or more people to carry larger TVs. Do not press
connecting it to telephone wires, lightning rods, or put stress on the front panel of the TV.
or gas pipes. ••Ventilation
Install your TV where there is proper ventilation.
Power
Do not install in a confined space such as a
Circuit
Supply bookcase. Do not cover the product with cloth or
Breaker
other materials while plugged in. Do not install
••As long as this unit is connected to the AC wall in excessively dusty places.
outlet, it is not disconnected from the AC power ••If you smell smoke or other odors coming from
source even if the unit is turned off. the TV, unplug the power cord and contact an
••Do not attempt to modify this product in any authorized service center.
way without written authorization from LG ••Keep the product away from direct sunlight.
Electronics. Unauthorized modification could ••Never touch this apparatus or antenna during a
void the user’s authority to operate this product. lightning storm.
••Outdoor Antenna Grounding ••When mounting a TV on the wall, make sure not
(Can differ by country): to install the TV by hanging the power and signal
If an outdoor antenna is installed, follow the cables on the back of the TV.
precautions below. An outdoor antenna system ••Do not allow an impact shock or any objects to
ENGLISH

should not be located in the vicinity of overhead fall into the product, and do not drop anything
power lines or other electric light or power onto the screen.
circuits, or where it can come in contact with ••DISCONNECTING THE DEVICE FROM THE
such power lines or circuits as death or serious MAIN POWER
injury can occur. Be sure the antenna system is The power plug is the disconnecting device.
grounded to provide some protection against In case of an emergency, the power plug must
voltage surges and built-up static charges. remain readily accessible.
Section 810 of the National Electrical Code (NEC) ••Batteries
in the U.S.A. provides information with respect Store the accessories (battery, etc.) in a safe
to proper grounding of the mast and supporting location out of the reach of children.
structure, grounding of the lead-in wire to ••This apparatus uses batteries. In your community
an antenna discharge unit, size of grounding there might be regulations that require you
conductors, location of antenna discharge to dispose of these batteries properly due to
unit, connection to grounding electrodes, and environmental considerations. Please contact
requirements for the grounding electrode. your local authorities for disposal or recycling
Antenna grounding according to the National information.
Electrical Code, ANSI/NFPA 70 ••Do not dispose of batteries in a fire.
••Do not short circuit, disassemble, or allow the
batteries to overheat.
Antenna Lead in Wire

Antenna Discharge Unit

Ground Clamp (NEC Section 810-20)

Electric Service Grounding Conductor

Equipment (NEC Section 810-21)

Ground Clamp Power Service Grounding

Electrode System
NEC: National Electrical Code (NEC Art 250, Part H)

4
••Do not use high voltage electrical equipment ••Avoid displaying a fixed image on the TV screen
near the TV, (e.g., a bug zapper). for a long period of time (2 or more hours for
This may result in product malfunction. LCD, 1 or more hours for the Plasma TV) to
••Dot Defect prevent image burn.
The panel is a high technology product with
resolution of two million to six million pixels. FCC Notice
In a very few cases, you could see fine dots on (For USA)
the screen while you’re viewing the TV. Those This equipment has been tested and found to
dots are deactivated pixels and do not affect the comply with the limits for a Class B digital device,
performance and reliability of the TV. pursuant to Part 15 of the FCC Rules. These limits
••Generated Sound are designed to provide reasonable protection
Cracking noise A cracking noise that occurs against harmful interference in a residential
when watching or turning off the TV is installation. This equipment generates, uses
generated by plastic thermal contraction due to and can radiate radio frequency energy and, if
temperature and humidity. This noise is common not installed and used in accordance with the
for products where thermal deformation is instructions, may cause harmful interference
required. to radio communications. However, there is no
Electrical circuit humming/panel buzzing guarantee that interference will not occur in a
A low level noise is generated from a high- particular installation. If this equipment does
speed switching circuit, which supplies a large cause harmful interference to radio or television
amount of current to operate a product. It varies reception, which can be determined by turning
depending upon the product. This generated the equipment off and on, the user is encouraged
sound does not affect the performance and to try to correct the interference by one or more of
reliability of the product. the following measures:
••Take care not to touch the ventilation openings. - Reorient or relocate the receiving antenna.
When watching the TV for a long period, the - Increase the separation between the equipment
ventilation openings may become hot. This does

ENGLISH
and the receiver.
not affect the performance of the product or
cause defects in the product. - Connect the equipment to an outlet on a circuit
••Do not install this product on a wall if it could be different from that to which the receiver is
exposed to oil or oil mist. This may damage the connected.
product and cause it to fall. - Consult the dealer or an experienced radio/TV
••If the TV feels cold to the touch, there may technician for help.
be a small flicker when it is turned on. This is This device complies with part 15 of the FCC
normal; there is nothing wrong with TV. Some Rules. Operation is subject to the following two
minute dot defects may be visible on the screen, conditions: (1) this device may not cause harmful
appearing as tiny red, green, or blue spots. interference and (2) this device must accept any
However, they have no adverse effect on the TV’s interference received, including interference that
performance. Avoid touching the LCD screen or may cause undesired operation of the device. Any
holding your finger(s) against it for long periods changes or modifications in construction of this
of time. Doing so may produce some temporary device which are not expressly approved by the
distortion effects on the screen. party responsible for compliance could void the
user’s authority to operate the equipment.
Preventing image burn or burn-in on
your TV screen

••If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
••If the aspect ratio of the TV is set to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.

5
 FCC Radio Frequency Interference ••The maximum antenna gain permitted for
Requirements (for UNII devices) devices in the bands 5250–5350 MHz and
5470–5725 MHz shall comply with the EIRP limit;
High power radars are allocated as primary users and
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. ••The maximum antenna gain permitted for
These radar stations can cause interference with devices in the band 5725–5825 MHz shall
and/or damage this device. This device cannot be comply with the e.i.r.p. limits specified for point-
co-located with any other transmitter. to-point and non point-to-point operation as
appropriate.
FCC RF Radiation Exposure Statement ••High-power radars are allocated as primary users
[For having wireless function (WLAN, Bluetooth,...)] (i.e. priority users) of the bands 5250–5350 MHz
This equipment complies with FCC radiation and 5650–5850 MHz and that these radars could
exposure limits set forth for an uncontrolled cause interference and/or damage to LE-LAN
environment. This transmitter must not be devices.
colocated or operating in conjunction with any
other antenna or transmitter. This equipment Note to Cable/TV Installer
should be installed and operated with minimum (For USA and Canada)
distance 20 cm (7.8 inches) between the radiator This reminder is provided to call the CATV system
and your body. Users must follow the specific installer’s attention to Article 820-40 of the
operating instructions for satisfying RF exposure National Electric Code (U.S.A.). The code provides
compliance. guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected
Industry Canada Statement to the grounding system of the building, as close
(For Canada) to the point of the cable entry as practical.
[For having wireless function (WLAN, Bluetooth,...)]
This device complies with RSS-210 of the Industry
ENGLISH

Canada Rules. Operation is subject to the following LG Recycling Policy

two conditions:
1. this device may not cause interference and (For USA)
2. this device must accept any interference, LG Electronics offers a customized e-waste
including interference that may cause undesired takeback and recycling service that meets
operation of the device. local needs and requirements in the countries
where e-waste regulations are in place, and also
IC Radiation Exposure Statement provides product and packaging takeback and
recycling service voluntarily in some countries.
(For Canada) LG Electronics evaluates products’ recyclability at
[For having wireless function (WLAN, Bluetooth,...)] the design step using LG’s recyclability evaluation
This equipment complies with IC radiation tool, with the goal of improving recyclability where
exposure limits set forth for an uncontrolled practicable. Through these activities, LG seeks to
environment. This equipment should be installed contribute to conserving natural resources and
and operated with minimum distance 20 cm protecting the environment.
(7.8 inches) between the antenna & your body.
For more information about the LG Recycling
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
Policy, please visit our global site at
FOR ANY RADIO OR TV INTERFERENCE CAUSED
http://www.lg.com/global/sustainability/
BY UNAUTHORIZED MODIFICATIONS TO THIS
environment takeback- recycling
EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.

WARNING
(For Canada)
[For product having the wireless function using
5 GHz frequency bands]
••The device for operation in the band 5150–5250
MHz is only for indoor use to reduce the
potential for harmful interference to co-channel
mobile satellite systems;

6
Viewing 3D Imaging CAUTION
(For 3D models)
Viewing Environment
••Viewing Distance
WARNING -M
 aintain a distance of at least twice the screen’s
diagonal length when watching 3D content.
Viewing Environment If you feel discomfort in viewing 3D content,
••Viewing Time move further away from the TV.
- When watching 3D content, take 5 to 15 minute
breaks every hour. Viewing 3D content for Viewing Age
a long period of time may cause headache, ••Infants / Children
dizziness, fatigue, or eye strain. -- Usage/ Viewing 3D content for children under
the age of 5 are prohibited.
Those that have a photosensitive -- Children under the age of 10 may overreact and
seizure or chronic illness become overly excited because their vision is
in development, for example, trying to touch
••Some users may experience a seizure or other the screen or trying to jump into it. Special
abnormal symptoms when they are exposed monitoring and extra attention is required for
to a flashing light or particular pattern from 3D children watching 3D content.
content. -- Children have greater binocular disparity of 3D
••Do not watch 3D videos if you feel nauseous, presentations than adults because the distance
are pregnant and/ or have a chronic illness such between the eyes is shorter than one of adults.
as epilepsy, cardiac disorder, or blood pressure Therefore they will perceive more stereoscopic
disease, etc. depth compared to adults for the same 3D
••3D Content is not recommended for those who image.
suffer from stereo blindness or stereo anomaly. ••Teenagers

ENGLISH
Double images or discomfort in viewing may be -- Teenagers under the age of 19 may be
experienced. stimulated to light coming from 3D videos.
••If you have strabismus (cross-eyed), amblyopia Advise them not to watch 3D videos for a long
(weak eyesight), or astigmatism, you may have time when they are tired.
trouble sensing depth and easily feel fatigue ••Elderly
due to double images. It is advised to take more -- The elderly may perceive less of a 3D effect
frequent breaks than the average adult. than the youth. Do not sit closer to the TV than
••If your eyesight varies between your right and the recommended distance.
left eye, correct your eyesight prior to watching
3D content. Cautions when using the 3D glasses
Symptoms which require ••Only use LG 3D glasses. Otherwise, you may not
be able to view 3D videos properly.
discontinuation or refraining from ••Do not use 3D glasses instead of your normal
watching 3D content glasses, sunglasses, or protective goggles.
••Do not watch 3D content when you feel fatigue ••Using modified 3D glasses may cause eye strain
from lack of sleep, overwork, or intoxication. or image distortion.
••When these symptoms are experienced, stop ••Do not keep your 3D glasses in extremely high or
using/watching 3D content and get enough rest low temperatures. It will cause deformation.
until the symptom subsides. ••The 3D glasses are fragile and are easily
-C onsult your doctor when the symptoms scratched. Use a soft, clean piece of cloth when
persist. Symptoms may include headache, wiping the lenses. Do not scratch the lenses of
eyeball pain, dizziness, nausea, palpitation, the 3D glasses with sharp objects or clean/wipe
blurriness, discomfort, double image, eyestrain, them with chemicals.
or fatigue.

7
 Preparing CAUTION
••Do not use any unapproved items to ensure the
NOTE safety and product’s lifespan.
••Any damages or injuries by using unapproved
••Image shown may differ from your TV. items are not covered by the warranty.
••Your TV’s OSD (On Screen Display) may differ ••Some models appear to have a thin film on the
slightly from that shown in this manual. screen. It is actually part of the screen; do not
••The available menus and options may differ from remove it.
the input source or product model that you are ••Do not remove the panel with your fingers or
using. any tools. Doing so may damage the product.
••New features may be added to this TV in the (For 55/65UF9500)
future.
••The items supplied with your product may vary
depending upon the model.
••Product specifications or contents of this manual
may be changed without prior notice due to
upgrade of product functions.
••For an optimal connection, HDMI cables and ••When attaching the stand to the TV set, place
USB devices should have bezels less than 10 mm the screen facing down on a cushioned table or
(0.39 inches) thick and 18 mm (0.7 inches) width. flat surface to protect the screen from scratches.
••Use an extension cable that supports USB 2.0 if ••Make sure that the screws are fastened tightly.
the USB cable or USB flash drive does not fit into (If they are not fastened securely enough, the TV
your TV’s USB port. may tilt forward after being installed.)
••Use a certified cable with the HDMI logo ••Do not fasten the screws with excessive force;
attached. If you do not use a certified HDMI otherwise, they may be worn out and become
cable, the screen may not display or a loose.
ENGLISH

connection error may occur.

••Recommended HDMI cable types (3 m or less)
-- High-Speed HDMI®/ TM cable Optional Extras
-- High-Speed HDMI ®/ TM cable with Ethernet
Optional extras can be changed or modified for
quality improvement without any notification.
B B Contact your dealer for buying these items.
These devices work only with certain models.
The model name or design may be changed due to
A A the manufacturer’s circumstances or policies.
*A 10 mm (0.39 inches) (Depending upon model)
*B 18 mm (0.7 inches)
AG-F*** AG-F***DP AN-VC550
Cinema 3D Dual Play Smart Camera
Glasses Glasses
AN-MR6** LG Audio
Magic Remote Device

8
Maintenance Lifting and Moving the TV
When moving or lifting the TV, read the following
Cleaning Your TV to prevent the TV from being scratched or
Clean your TV regularly to keep it at peak damaged and for safe transportation regardless of
performance and to extend the product’s lifespan. its type and size.
••It is recommended to move the TV in the box or
CAUTION packing material that the TV originally came in.
••Before moving or lifting the TV, disconnect the
••Before cleaning, turn the power off and
power cord and all cables.
disconnect the power cord and all other cables.
••When the TV is left unattended or unused for a
long time, disconnect the power cord from the ••When holding the TV, the screen
wall outlet to prevent possible damage from should face away from you to
lightning or power surges. avoid damage.

Screen, Frame, Cabinet, and Stand ••Hold the top and bottom of the TV frame firmly.
To remove dust or light dirt, wipe the surface with Make sure not to hold the transparent part,
a dry, clean, and soft cloth. speaker, or speaker grille area.
To remove major dirt, wipe the surface with a soft
cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.

CAUTION
••Do not push, rub, or hit the surface with your
fingernail or a sharp object, as this may result in

ENGLISH
scratches on the screen and image distortions.
••Do not use any chemicals, such as waxes,
benzene, alcohol, thinners, insecticides, air
fresheners, or lubricants, as these may damage
••Use at least two people to move
the screen’s finish and cause discoloration.
a large TV.
••Do not spray liquid onto the surface. If water
••When transporting the TV by
enters the TV, it may result in fire, electric shock,
hand, hold the TV as shown in the
or malfunction.
following illustration.
Power Cord ••When transporting the TV, do not expose the TV
Remove the accumulated dust or dirt on the power to jolts or excessive vibration.
cord regularly. ••When transporting the TV, keep the TV upright;
never turn the TV on its side or tilt towards the
left or right.

CAUTION
••Avoid touching the screen at all times, as this
may result in damage to the screen.
••Do not place the product on the floor with its
front facing down without padding. Failure to do
so may result in damage to the screen.
••Do not move the TV by holding the cable
holders, as the cable holders may break, and
injuries and damage to the TV may occur.
(Depending upon model)

9
 Using the Joystick Button Mounting on a Table
(Depending upon model) (Depending upon model)
(Image shown may differ from your TV.) 1 Lift and tilt the TV into its upright position on a
You can operate the TV by pressing the button or table.
moving the joystick left, right, up, or down. - Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.

10 cm
Joystick Button (4 inches)
10 cm
10 cm
m
10 c

Basic Functions
When the TV is turned off, 2 Connect the power cord to a wall outlet.
place your finger on the
Power On
joystick button, press it once, CAUTION
and release it.
• Do not place the TV near or on sources of heat,
When the TV is turned on,
place your finger on the as this may result in fire or other damage.
joystick button, press it once
Power Off for a few seconds, and release
ENGLISH

it. All running apps will close Securing the TV to a Wall

and any recording in progress
will stop. (optional)
If you place your finger over
Volume the joystick button and move (Depending upon model)
Control it left or right, you can adjust
the volume level you want.
If you place your finger over
the joystick button and move
Channels
it up or down, you can scroll
Control
through the saved channels
you want.

NOTE
• With your finger over the joystick button and
move it up, down, left, or right. Be careful not to
press the joystick button. If you press the joystick
button first, you may not be able to adjust
the volume level and/or scroll through saved
channels.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
Adjusting the Menu - If there are bolts inserted at the eye-bolts
When the TV is turned on, press the joystick button position, remove the bolts first.
one time. 2 Mount the wall brackets with the bolts to the
You can adjust the Menu items moving the joystick wall. Match the location of the wall bracket and
button up, down, left, or right. the eye-bolts on the rear of the TV.
Turns the power off.
3 Connect the eye-bolts and wall brackets tightly
Accesses the quick settings. with a sturdy rope or cable. Make sure to keep
Clears on-screen displays and returns to TV viewing. the rope parallel to the flat surface.
Changes the input source.

10
 CAUTION Model 43UF7590 49/55UF7590
40/43UF7600 49/55UF7600
••Make sure that children do not climb on or hang 55UF8500
on the TV. 55UF9500
VESA (A x B) 200 x 200 300 x 300
NOTE Standard screw M6 M6
••Use a platform or cabinet that is strong and large Number of 4 4
enough to support the TV securely. screws
••Brackets, bolts, and ropes are optional. You can Wall mount MSW240 MSW240
obtain additional accessories from your local bracket (optional) LSW240B LSW350B
dealer. Model 60/65UF7650 70UF7650
60/65UF7690 70/79UF7690
60/65UF7700 70/79UF7700
Mounting on a Wall 60/65UF8500
65UF9500
VESA (A x B) 300 x 300 600 x 400
An optional wall mount can be used with your
LG Television. Consult with your local dealer for Standard screw M6 M8
a wall mount that supports the VESA standard Number of 4 4
used by your TV model. Carefully attach the wall screws
mount bracket at the rear of the TV. Install the wall Wall mount LSW350B LSW640B
mount bracket on a solid wall perpendicular to the bracket (optional)
floor. If you are attaching the TV to other building A
materials, please contact qualified personnel to
install the wall mount. Detailed instructions will B
be included with the wall mount. We recommend
that you use an LG brand wall mount. When you do
not use LG’s wall mount bracket, use a wall mount CAUTION

ENGLISH
bracket where the device is adequately secured to
••Disconnect the power before moving or
the wall with enough space to allow connectivity
installing the TV. Otherwise electric shock may
to external devices.
occur.
••Remove the stand before installing the TV on a
wall mount by performing the stand attachment
10 cm
in reverse.
(4 inches) ••If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
10 cm
10 cm
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a
third-party wall mount, it is not covered by the
10 cm warranty.
••Do not overtighten the screws as this may cause
damage to the TV and void your warranty.
Make sure to use screws and wall mounts that ••Use the screws and wall mounts that meet the
meet the VESA standard. Standard dimensions for VESA standard. Any damages or injuries by
the wall mount kits are described in the following misuse or using an improper accessory are not
table. covered by the warranty.

NOTE
••Use the screws that are listed in the VESA
standard screw specifications.
••The wall mount kit includes an installation
manual and necessary parts.
••The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
••The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.
••For more information, refer to the manual
supplied with the wall mount.
11
 ••When using the wall mounting bracket, apply Connecting to an Antenna or
the adhesive protective label to cover the
unused stand openings. This will prevent the Cable
accumulation of dust and dirt. (Use only when
provided with your particular model.) Connect an antenna, cable, or cable box to watch
Provided Item TV. The illustrations may differ from the actual
items and an RF cable is optional.

CAUTION
••Make sure not to bend the copper wire of the RF
cable.
Adhesive protective label

Copper wire
Connections (Notifications)
You can connect various external devices to the TV. ••Complete all connections between devices, and
Supported external devices are: HD receivers, DVD then connect the power cord to the power outlet
players, VCRs, audio systems, USB storage devices, to prevent damage to your TV.
PC, gaming devices, and other external devices.
For more information on an external device’s NOTE
connection, refer to the manual provided with ••Use a signal splitter to use 2 TVs or more.
each device. ••DTV Audio Supported Codec: MPEG,
Dolby Digital.
NOTE ••Direct ULTRA HD broadcast is unavailable in
••If you record a TV program on a DVD recorder or areas without a ULTRA HD signal.
ENGLISH

VCR, make sure to connect the TV signal input ••This TV cannot receive ULTRA HD (3840 x 2160
cable to the TV through a DVD recorder or VCR. pixels) broadcasts directly because the related
For more information about recording, refer to standards have not been confirmed. (Depending
the manual provided with the connected device. upon model)
••The external device connections shown may
differ slightly from illustrations in this manual.
••Connect external devices to the TV regardless Other Connections
about the order of the TV port.
••If you connect a gaming device to the TV, use the Connect your TV to external devices. For the best
cable supplied with the gaming device. picture and audio quality, connect the external
••Refer to the external equipment’s manual for device and the TV with the HDMI cable. Depending
operating instructions. upon the model, a cable may not be provided.
••In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast, NOTE
or brightness. If noise is present, change the PC
•• j j j Picture j
output to another resolution, change the refresh
HDMI ULTRA HD Deep Color:
rate to another rate, or adjust the brightness and
-- On: Support 4 K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)
contrast on the PICTURE menu until the picture
-- Off: Support 4K @ 60 Hz (4:2:0)
is clear.
••If the device connected to Input Port also
••Depending upon the graphics card, some
supports ULTRA HD Deep Color, your picture
resolution settings may not allow the image to
may be clearer. However, if the device doesn’t
be positioned on the screen properly.
support it, it may not work properly. In that case,
connect the device to a different HDMI port or
change the TV’s HDMI ULTRA HD Deep Color
setting to Off.
-- This feature is available only on certain models
which support HDMI ULTRA HD Deep Color.

12
Magic Remote Functions
(Image shown may differ from your TV.)
When the message Magic remote battery is low. B
Change the battery. is displayed, replace the
battery. To install batteries, open the battery cover,
replace batteries (1.5 V AA) matching and
ends to the label inside the compartment, and
close the battery cover. Failure to match the correct
polarities of the battery may cause the battery to
burst or leak, resulting in fire, personal injury, or
ambient pollution. Be sure to point the remote
control at the remote control sensor on the TV. C
To remove the batteries, perform the installation
actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV’s
remote sensor.
CAUTION
••Do not mix old and new batteries, as this may
damage the remote control.
B
VOL Adjusts the volume level.
(MUTE) Mutes all sounds.

ENGLISH
••By pressing and holding the button, VD
function will be enabled.
••SAP (Secondary Audio Program) Feature can
also be enabled by pressing the key.
(Home) Accesses the Home menu.
CH Scrolls through the saved channels.

A (Back) Returns to the previous screen.

EXIT Clears all on-screen displays and returns to
TV viewing.

A C
(POWER) Turns the TV on or off. (up/down/left/right) Press the up, down,
left or right button to scroll the menu. If you press
(Input) Changes the input source.
buttons while the pointer is in use, the
* Pressing and holding the (Input) button
displays all the lists of external inputs. pointer will disappear from the screen and Magic
Remote will operate like a general remote control.
Number button Enters numbers. To display the pointer on the screen again, shake
- (Dash) Inserts a dash between numbers such as Magic Remote to the left and right.
2-1 and 2-2.
Wheel (OK) Press the center of the Wheel
LIST Accesses the saved channel list. button to select a menu. You can change channels
INFO Shows information on the current program. by using the Wheel button.
(Q. Settings) Accesses the quick settings.
* Pressing and holding the (Q. Settings) button
displays the Advanced menu.

13
 (Screen Remote) Displays the Screen Remote. How to Use Magic Remote
* Accesses the Universal Control Menu in some regions. ••Shake the Magic Remote slightly to
the right and left or press
Used for viewing 3D video. (For 3D models) (Home), (Input), buttons
(Voice recognition) Network connection is to make the pointer appear on the
required to use the voice recognition function. screen. (In some TV models, the
pointer will appear when you turn the
1. Press the voice recognition button.
Wheel button.)
2. Speak when the voice display window appears ••If the pointer has not been used for
on the left of the TV screen. a certain period of time or Magic
••Use the Magic Remote no further than 10 cm Remote is placed on a flat surface,
(4 inches) from your face. then the pointer will disappear.
••The voice recognition may fail when you speak ••If the pointer does not move as you
too fast or too slowly. wish, shake Magic Remote to the left
••The recognition rate may vary depending upon and right. The pointer will move to
the user’s characteristics (voice, pronunciation, the center of the screen.
intonation, and speed) and the environment ••The Magic Remote depletes batteries
(noise and TV volume). faster than a normal remote due to
CAPTION Activates or deactivates the subtitles. the additional features.
Color buttons These access special functions in
some menus. Precautions to Take When Using the
( Red, Green, Yellow, Blue) Magic Remote
••Use the Magic Remote within the maximum
Registering Magic Remote communication distance (10 m, 32.8 ft). Using
the remote control beyond this distance, or
ENGLISH

How to register the Magic Remote with an object obstructing it, may cause a
communication failure.
To use the Magic Remote, first pair it
••A communication failure may occur due to
with your TV.
nearby devices. Electrical devices such as a
1 Put batteries into the Magic Remote microwave oven or wireless LAN product may
and turn the TV on. cause interference, as these use the same
2 Point the Magic Remote at your TV bandwidth (2.4 GHz) as the Magic Remote.
and press the Wheel (OK) on the ••The Magic remote may be damaged or may
(Wheel) remote control. malfunction if it is dropped or receives a heavy
••If the TV fails to register the Magic impact.
Remote, try again after turning the TV ••Take care not to bump into nearby furniture or
off and back on. other people when using the Magic Remote.
••Manufacturer and installer cannot provide
service related to human safety as the
How to deregister the Magic Remote applicable wireless device has possibility of
Press the (Back) and (Home) electromagnetic interference.
buttons at the same time, for five ••It is recommended that an Access Point (AP) be
located more than 1 m (3.28 ft.) away from the
(Back) seconds, to unpair the Magic Remote
with your TV. TV. If the AP is installed closer than 1 m (3.28 ft.),
••Pressing and holding the the Magic Remote may not perform as expected
(Home) EXIT button will let you cancel and due to frequency interference.
re-register Magic Remote at once.

14
Licenses Specifications
Supported licenses may differ by model. Product specifications may be changed without
For more information about licenses, visit prior notice due to upgrade of product functions.
www.lg.com.
Television System
ATSC, NTSC-M, 64 & 256 QAM

Program Coverage
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135

External Antenna Impedance

Open Source Software Notice 75 Ω

Information Environment Condition

To obtain the source code under GPL, LGPL, MPL, ••Operating Temperature
and other open source licenses, that is contained 0 °C to 40 °C (32 °F to 104 °F)
in this product, please visit http://opensource.lge. ••Operating Humidity
com. Less than 80 %
In addition to the source code, all referred license ••Storage Temperature
terms, warranty disclaimers and copyright notices - 20 °C to 60 °C (-4 °F to 140 °F)
are available for download. ••Storage Humidity
LG Electronics will also provide open source code Less than 85 %
to you on CD-ROM for a charge covering the cost
Wireless Module (LGSBW41)

ENGLISH
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request Specifications
to opensource@lge.com. This offer is valid for three
(For UF7590, UF7600, UF7650, UF7690, UF7700,
(3) years from the date on which you purchased
UF8500 series)
the product.
Wireless LAN Bluetooth
Bluetooth
Standard IEEE 802.11a/b/g/n Standard Version
Troubleshooting 4.0
2400 to 2483.5 MHz 2400 to
••Cannot control the TV with the remote control. Frequency Frequency
5150 to 5250 MHz 2483.5
-- Check if anything such as tape has been placed range range
5725 to 5850 MHz MHz
over the receiver. 802.11a: 11.5 dBm
-- Check if there is any obstacle between the 802.11b: 11 dBm
product and the remote control. Output 802.11g: 10.5 dBm Output
-- Replace the batteries with new ones. 10 dBm or
power 802.11n - 2.4 GHz: power
••No image display and no sound is produced. Lower
(Max.) 11 dBm (Max.)
-- Check if the product is turned on. 802.11n - 5 GHz:
-- Check if the power cord is connected to a wall 12.5 dBm
outlet. •• Because band channel used by the country could
-- Check if there is a problem in the wall outlet by be different, the user can not change or adjust the
connecting other products. operating frequency and this product is set for the
••The TV turns off suddenly. regional frequency table.
•• This device should be installed and operated with
-- Check the power control settings. The power
minimum distance 20 cm (7.8 inches) between
supply may be interrupted. the device and your body. And this phrase is for
-- Check if the Sleep Timer / Timer Power Off the general statement for consideration of user
feature is activated in the Timers settings. environment.
-- If there is no signal while the TV is on, the TV •• Contains FCC ID: BEJLGSBW41 /
will turn off automatically after 15 minutes of Contains IC: 2703H-LGSBW41
inactivity.

15
 Wireless Module (LGSBW51)
Specifications
(For UF9500 series)
Wireless LAN Bluetooth
IEEE 802.11a/b/g/n/ Bluetooth
Standard Standard
ac Version 4.0
2400 to 2483.5 MHz 2400 to
Frequency Frequency
5150 to 5250 MHz 2483.5
range range
5725 to 5850 MHz MHz
802.11a: 15 dBm
802.11b: 17 dBm
802.11g: 15 dBm
Output 802.11n - 2.4 GHz: Output
10 dBm or
power 15 dBm power
Lower
(Max.) 802.11n - 5 GHz: (Max.)
15 dBm
802.11ac - 5 GHz :
15 dBm
•• Because band channel used by the country could
be different, the user can not change or adjust the
operating frequency and this product is set for the
regional frequency table.
•• This device should be installed and operated with
minimum distance 20 cm (7.8 inches) between
the device and your body. And this phrase is for
the general statement for consideration of user
environment.
ENGLISH

•• Contains FCC ID: BEJLGSBW51 /

Contains IC: 2703H-LGSBW51

16
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry are committed to
making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must be supported on
proper stands or installed according to the manufacturer’s recommendations. Televisions that
are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,
may fall over, resulting in injury.

TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on which the television
is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of
drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped
over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your
ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a
safety certification by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.
Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder
block construction. If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount
installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN

YOUR HOME
• Many new television buyers move their older CRT televisions into a secondary room after the
purchase of a flat-panel television. Special care should be made in the placement of older CRT
televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size
and weight.
• NEVER place your older CRT television on a dresser where children may be tempted to use the
drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

CE.org/safety
 Declaration of Conformity
Trade Name: LG
Model: 43UF7590-UH, 49UF7590-UH, 55UF7590-UH,
40UF7600-UJ, 43UF7600-UJ, 49UF7600-UJ,
55UF7600-UJ, 60UF7650-UJ, 65UF7650-UJ,
70UF7650-UJ, 60UF7690-UH, 65UF7690-UH,
70UF7690-UH, 79UF7690-UB, 60UF7700-UJ,
65UF7700-UJ, 70UF7700-UJ, 79UF7700-UB,
55UF8500-UB, 60UF8500-UB, 65UF8500-UB,
55UF9500-UA, 65UF9500-UA
Responsible Party: LG Electronics Inc.
Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A
TEL: 201-266-2534

LG Customer Information Center

For inquires or comments, visit www.lg.com or call;
1-800-243-0000 USA, Consumer User
The model and serial numbers of the TV are located on
the back and on one side of the TV. Record them below 1-888-865-3026 USA, Commercial User
should you ever need service. 1-888-542-2623 CANADA
MODEL Register your product Online!
SERIAL www.lg.com
 ENGLISH
Easy Setup Guide
LED TV
Please read this manual carefully before operating your set and retain it for future reference.
ESPAÑOL 55UF9500
Guía Rápida de Configuración 65UF9500
Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
FRANÇAIS
Guide de configuration rapide
Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.

AA

(55UF9500)
b
X8
(M4 X L20)
a

www.lg.com

P/No : MFL68684932 (1501-REV00)

i
ENGLISH Read Safety and Reference.
ESPAÑOL Leer Seguridad y Consultas.
FRANÇAIS Lisez Sécurité et référence.

?
 
1
1 2

b
A a
*A 150 mm

3 4 5

a b
2
ENGLISH Image shown may differ from your TV.
ESPAÑOL La imagen puede ser diferente a la de su televisor.
FRANÇAIS Cette illustration peut ne pas correspondre à votre téléviseur.

B
B
Audio Out

L R

AUDIO VIDEO VIDEO L (MONO) AUDIO R

3 5

4
1 2

3 4
ENGLISH MODELS 55UF9500 65UF9500
(55UF9500-UA) (65UF9500-UA)
1,236 x 773 x 240 (mm) 1,455 x 896 x 249 (mm)
With stand
48.6 x 30.4 x 9.4 (inches) 57.2 x 35.2 x 9.8 (inches)
Dimensions (W x H x D)
1,236 x 722 x 47.6 (mm) 1,455 x 845 x 48.5 (mm)
Without stand
48.6 x 28.4 x 1.8 (inches) 57.2 x 33.2 x 1.9 (inches)
With stand 22.2 kg (48.9 lbs) 29.6 kg (65.2 lbs)
Weight
Without stand 19.0 kg (41.8 lbs) 25.5 kg (56.2 lbs)
Power requirement AC 100-240 V ~ 50/60 Hz AC 120 V ~ 50/60 Hz
Current Value / Power consumption 1.8 A / 180 W 2.1 A / 210 W

ESPAÑOL MODELOS 55UF9500 65UF9500

FRANÇAIS MODÈLES (55UF9500-UA) (65UF9500-UA)
Con base 1 236 x 773 x 240 (mm) 1 455 x 896 x 249 (mm)
Dimensiones
(Ancho x altura x profundidad) 48,6 x 30,4 x 9,4 57,2 x 35,2 x 9,8
Avec support (pulgadas / po) (pulgadas / po)
Sin base 1 236 x 722 x 47,6 (mm) 1 455 x 845 x 48,5 (mm)
Dimensions (L x H x P) 48,6 x 28,4 x 1,8 57,2 x 33,2 x 1,9
Sans support (pulgadas / po) (pulgadas / po)
Con base
Peso 22,2 kg (48,9 libras / lb) 29,6 kg (65,2 libras / lb)
Avec support
Sin base
Poids 19,0 kg (41,8 libras / lb) 25,5 kg (56,2 libras / lb)
Sans support
Potencia requerida
AC 100-240 V ~ 50/60 Hz AC 120 V ~ 50/60 Hz
Alimentation
Corriente de consumo / Consumo de la potencia
1,8 A / 180 W 2,1 A / 210 W
Valeur courante / Consommation électrique
*MFL68684932*

(For USA and Canada only) (Pour les États-Unis et le Canada)

(Para Estados Unidos y Canadá) Ce produit est conforme aux normes
This product qualifies for ENERGY STAR ENERGY STAR lorsque le « réglage d’usine
in the factory default (HOME MODE) par défaut (USAGE FAMILIAL) » est
setting. Changing the factory default sélectionné. Modifier les réglages d’usine
settings or enabling other features may par défaut ou activer d’autres fonctionnalités
increase power consumption that could exceed the augmente la consommation d’énergie qui pourrait alors
limits necessary to quality for ENERGY STAR. Refer to dépasser les limites de la qualification Energy Star.
ENERGYSTAR.gov for more information on the Consultez le site ENERGYSTAR.gov pour en savoir plus
ENERGY STAR program. au sujet du programme ENERGY STAR.