The document discusses the chemical composition, physical properties, mechanical properties, heat treatment, and microstructure of the steel alloy 12X18H10T. It provides data on the tensile strength, yield strength, elongation percentage, hardness, and common heat treating processes for this steel. The document also notes that 12X18H10T can be produced and processed into plates, sheets, bars, pipes, coils, and other shaped products.
The document discusses the chemical composition, physical properties, mechanical properties, heat treatment, and microstructure of the steel alloy 12X18H10T. It provides data on the tensile strength, yield strength, elongation percentage, hardness, and common heat treating processes for this steel. The document also notes that 12X18H10T can be produced and processed into plates, sheets, bars, pipes, coils, and other shaped products.
The document discusses the chemical composition, physical properties, mechanical properties, heat treatment, and microstructure of the steel alloy 12X18H10T. It provides data on the tensile strength, yield strength, elongation percentage, hardness, and common heat treating processes for this steel. The document also notes that 12X18H10T can be produced and processed into plates, sheets, bars, pipes, coils, and other shaped products.
The document discusses the chemical composition, physical properties, mechanical properties, heat treatment, and microstructure of the steel alloy 12X18H10T. It provides data on the tensile strength, yield strength, elongation percentage, hardness, and common heat treating processes for this steel. The document also notes that 12X18H10T can be produced and processed into plates, sheets, bars, pipes, coils, and other shaped products.
12X18H10T Chemical information,Mechanical properties
Physical properties, Mechanical properties, Heat treatment, and Micro structure
This page is mainly introduced the 12X18H10T chemical information,mechanical
properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 12X18H10T,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.
Data Table for Grades Stainless Steels & Special
Steels 12X18H10T
12X18H10T Standard Number:
ITEM Standard Number Descriptions
12X18H10T Chemical composition(mass fraction)(wt.%)
Pipes / Tubes Seamless Pipes/Tubes, OD:6-219mm x Hot extrusion, Cold Annealed, Solution and Welded Pipes/Tubes WT:0.5-20.0mm Drawn, Welded Aging, Q+T, ACID- WASHED
We can produce Stainless Steels & Special Steels the specifications
follows: Note: (1) listed in the table apex diameter (d), to steel thickness (a) multiples said. (2) in the ASTM A6 standard specified scope can meet any additional conditions. (3) from the standard for 50 mm (2 in). Mechanical properties Mechanische Eigenschaften Caracteristiques mecaniques ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d’elasticite minimale Rm Tensile strength / Zugfestigkeit / Resistance a la traction A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
12X18H10T Chemical information,Mechanical properties Physical properties, Mechanical properties, Heat treatment, and Micro structure
Diameter : 1mm-2000mm Square bar: Size: 50mm * 50mm-600mm *600mm Plate steel/flat bar: Size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm. Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm Length: We can supply any length based on the customer's requirement. Forging/hot rolling/ extrusion of steel. Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode. Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement. UTS according to SEP 1921 C/c,D/d,E/e;A388 or GB/T 6402 Excellent service for all kinds of industries, with advantages of technologies, equipment and price. We serve you with our honesty, integrity, and professionality.
