(BILL OF QUANTITY)

Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit

2 Flooring work
2.1 Providing & Fixing Carpet underlay with 10mm thick DURAfill or
apporved equivalent of approved Color, manufactured by The Supreme
Industries Limited, or approved equivalent thickness built up using
minimum 10 MM specifically extruded high performance sheet, minimum
density 30 kg / Cu. Mt & compression strength of 0.21 Kg / Cm. Sq.,
when tested as per ASTM D-3575. DURAFIL or appproved equivalent
will work as a moisture barrier & provide cushioning to carpet.
441.17 sqm

2.2 Textile floor carpet over seating area : Providing of Forbo Flotex
Flocked floor covering of 4.3mm thickness rolls having a density of 70
million fibres of nylon 6.6 per M2 , Fire Test EN-13501, Appearence
Retention Hexapod ISO 140-8,Friction Slip Resistance Test EN 14041
Class DS, sanitized anti-microbial treatment with resilient waterproof
backing ,anti allergic cetrtified by British allergy foundation, anti static,
acoustical impact sound should be 20dB and approximate weight of 1.8
k.g./sqm of roll form. The reaction to fire should be as per EN13501-1:
Bfl-s1. carpet should be installed after self leveling compound done
properly as per company specifications. 441.17 sqm

2.3 Antistatic Flooring for Projector Room:Providing and fixing removable

raised/false access flooring with system and its components of approved
make for different plenum height with possible height adjustment upto 50
mm, comprising of modular load bearing floor panels supported on G.I.
rectangular stinger frame work and G.I. Pedestal etc. all complete, as
per the architectural drawings, as specified and as directed by Engineer-
in-charge consisting of :

a) P roviding at required spacing to form modular framework, pedestals

made out of GI tube of thickness minimum 2 mm and 25 mm outer
diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm
x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size
75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer
diameter with two GI Check nuts screwed on the stud for level
adjustment upto 50mm, locking and stabilizing the pedestal head in
position at the required level. The pedestals shall be fixed to the subfloor
(base) through base plate using epoxy based adhesive of approved
make or the machine screw with rawl plug.
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
b) S tringers system in all steel construction hot dipped galvanized of
rectangular size 570x20x30x0.80mm thick having holes at both ends for
ensuring maximum lateral stability in all directions, the grid formed by the
pedestal and stringer assembly shall receive the floor panel, this system
shall provide adequate solid, rigid support for access floor panel, the
system shall provide a minimum clear uninterrupted clearance between
the bottom of the floor for electrical conduits and wiring etc. all complete
as per the architectural drawings, as specified and as directed by the
Engineer-incharge.securing the stringers on to the pedestal head using
fully threaded screws
c) Providing and fixing Access Floor panel of 600x600x32 mm
mediumgrade Filled Steel anti static high pressure Lamination of 800H
grade (FS800H). Access Floor panel shall be steel welded construction
with an enclosed bottom pan with uniform pattern of 64 hemispherical
cones. The top and bottom plates of Steel Gauges: top 0.6 mm and
bottom 0.7 mm fused spot welded together (minimum 64 welds in each
dome and 20 welds along each flange). The panel should be Corroresist
epoxy coated for lifetime rust protection and cavity formed by the top and
bottom plate is filled with Pyrogrip noncombustible Portland cementitious
core mixed with lightweight foaming compound.

The access floor shall be factory finished with Anti-static High Pressure
laminate with Non Warp technology upto 1mm thickness for superior
adhesion and Surface flatness within 0.75mm.The panel is to withstand
a Concentrated Load of 363 kgs applied on area 25mm x 25mm without
collapse in the centre of the panel which is placed on four steel blocks.
The panel will withstand and Uniformly Distributed Load (UDL) minimum
1250 kg/sqm and an impact load of 50kg all complete as per the
approved manufacturers specification and as per the direction of
Engineer-in-charge. All specification must be printed on the side of the
panel to ensure the quality of the product.

300 mm Finished Floor Height (FFH) 24.00 Sqm

 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
2.4 External Interlocking Paver :Providing and laying factory made
chamfered edge Cement Concrete paver blocks of required strength,
thickness & size/shape, made by table vibratory method, to attain
superior smooth finish using PU or equivalent moulds, laid in approved
colour & pattern over 50mm thick compacted bed of coarse sand,
compacting and proper embedding / laying of inter locking paver blocks
into the sand bedding layer through vibratory compaction by using plate
vibrator, filling the joints with jamuna sand and cutting of paver blocks as
per required size and pattern, finishing and sweeping extra sand in
footpath, parks, lawns, drive ways or light traffic parking etc. all complete
as per manufacturer’s specifications & direction of Engineer -in-Charge:
(a) 80 mm thick c.c. paver block of M-30 grade with approved color
design and pattern.
350.00 Sqm

2.5 Supply and installation of vinyl sheet flooring, 2 metre wide and overall
thickness of 2mm. The thickness of wear layer would be 2mm. The
product should be homogeneous and single layered. The wear surface
shall consist of impregnated polyurethane homogeneous mixture of PVC
with TRUESHIELD technology, Plasticizers without DOP, Urethane,
color pigments and filler calendered to form a sheet. Color and pattern
details shall be dispersed throughout the thickness of the wear layer. It
shall conform to group "T" wear resistance as per EN 649, Clean Room
certified with class 'A' as per ASTMF5100, Flammability resistance of
class Bfl-s1 as per GB8624-2006, Dynamic coefficient of friction of class
DS as per EN 13893, Thermal Resistance of 0.072m2K/W as per EN
12667, Thermal conductivity of 0.071W/mK as per EN12524, impact
sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9
as per DIN 51130, Residual indentation of 0.03mm as per GB/T 4085-
2005, Color fastness rating of ≥6 as per ISO 105-B02, total weight being
2.8kg/m2 as per EN430. The product shall be suitable for applications in
class 23/34/43 areas as per EN685. Product shall exhibit antistatic
behaviour, resistance to bacteria,resistance to chemical, resistance to
staining,suitability to castor chair.
Installation- It is important to ensure the subfloor on which the sheet is
being laid is smooth, flat, hard and free from moisture, grease etc. In
case of uneven subfloor the same should be levelled using self leveling
compound. IPS/Vitrified/ceramic/mosaic tiles do not provide zero leveled
sub floor. The moisture present in the subfloor should be less than 8%
before installation of the floor. The sheet should be installed as per
recommended adhesive. The installation shall be undertaken as per
153.00 Sqm
manufacturers installation instructions.
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
3 CEILING WORK
3.1 Acoustic Grid Ceiling Tile :Providing & Fixing of Soft Fibre Acoustical
Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles
With 15mm Exposed Grid.
The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0,
Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 /
Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm .
The tile shall be laid on grid with 15/20 mm wide T - section flanges
colour white having rotary stitching on all T sections i.e. the Main
Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm
and a load carrying capacity of 14 Kgs/M2 with a minimum pull out
strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per
M2 and need to be installed with Suspension system of approved make.
Main runner spaced at 1200mm centres securely fixed to the structural
soffit using approved make suspension system at 1200mm maximum
centre. The First/Last suspension system at the end of each main
runner should not be greater than 450mm from the adjacent wall.
Flush fitting 1200mm long cross tees to be interlocked between main
runners at 600mm centre to form 1200 x 600 mm module. Cut cross
tees longer than 600mm require independent support. 600 x 600mm
module to be formed by fitting 600mm long flush fitting cross tees
centrally between the 1200 mm cross tees.
Perimeter trim to be Armstrong wall angles of size 3000x19x19mm,
secured to walls at 450 mm maximum centres.

SUSPENSION SYSTEM accessories manufactured and supplied by

approved make consisting of M6 Anchor Fasteners with Vertical
Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a
Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia
– 2.5 mm of 1.8 m length., thickness of 80gsm and a tensile strength of
344-413 MPa, along with Adjustable hook clips of 0.8mm thick,
galvanised spring steel for 2.68 mm with a minimum pull strength of 110
kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be
used with the main runner. 388.58 Sqm
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
3.2 Corridor ceiling system: Providing and fixing GI Clip in Metal Ceiling
System of 600x600 mm module which includes providing and fixing ‘C’
wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel
along the perimeter of the room with help of nylon sleeves and wooden
screws at 300 mm center to centre, suspending the main C carrier of
size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with
help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and
C carrier suspension clip and main carrier bracket at 1000 mm c/c.
Inverted triangle shaped Spring Tee having height of 24 mm and width of
34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier
and in direction perpendicular to it at 600 mm centers with help of
suspension brackets. Wherever the main C carrier and spring T have to
join, C carrier and spring T connectors have to be used. All sections to
be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in
tiles into spring ‘T’ with :

GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size
600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having
galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation
area with 1.8 mm dia holes and having NRC of 0.5, electro statically
polyester powder coated of thickness 60 microns (minimum), including
factory painted after bending and perforation. 531.41 Sqm

3.3
Board Ceiling for Band/Border Providing & fixing false ceiling at all
height including providing & fixing offramework made of special section,
power pressed from M.S. sheets and galvanised with zinc coating of 120
gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle
cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm,
at 1200mm c/c, one flange fixed to the ceiling with dash fastener
12.5mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to
the angle hangers of 25 x10 x0.50mm of
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
required length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at
the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick
bottom wedge of 80mm with tapered flanges of 26 mm each having lips
of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to
G.I intermediate channel with connecting clip made out of 2.64mm dia x
230mm long G.I wire at every junction, including fixing perimeter
channels 0.50mm thick 27mm high having flanges of 20mm and 30mm
long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl
plugs at 450mm centre, with 25mm long dry wall screws @ 230mm
interval, including fixing of Calcium Silicate Board to ceiling section and
perimeter channels with the help of

dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing &
finishing to a flush finish of tapered and square edges of the board with
recommended jointing compounds, jointing tapes,finishing with jointing
compounds in three layers covering up to 150mm on both sides of joints
and two coats of primer suitable for boards, all as per manufacture’s
specification and also including the cost of making opening for light
fittings,grills, diffusers, cut outs made with frame of perimeter channels
suitablyfixed, all complete as per drawings, specificaton and direction of
the Engineer in charge but excluding the cost of painting with:

a. 8 mm thick Calcium Silicate Board made with Calcareous &

Siliceous materials reinforced with cellulose fiber manufactured
through autoclaving process.
258.80 sqm
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
3.4 Board Grid Ceiling Tile :Providing and fixing tiled false ceiling of
approved materials of size 595x595 mm in true horizontal level,
suspended on interlocking metal grid of hot dipped galvanized steel
sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting
of main “T” runner with suitably spaced joints to get required length and
of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at
1200 mm center to center and cross “T” of size 24x25 mm made of 0.30
mm thick (minimum) sheet, 1200 mm long spaced between main “T” at
600 mm center to center to form a grid of 1200x600 mm and secondary
cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick
(minimum) sheet to be interlocked at middle of the 1200x600 mm panel
to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and
laying false ceiling tiles of approved texture in the grid including, required
cutting/making,
opening for services like diffusers, grills, light fittings, fixtures, smoke
detectors etc. Main “T” runners to be suspended from ceiling using GI
slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm
dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with
galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200
mm center to center along main T, bottom exposed width of 24 mm of all
T-sections shall be pre-painted with polyester paint, all complete for all
heights as per specifications, drawings and as directed by Engineer-in-
charge.
8 mm thick fully perforated calcium silicate board made with Calcareous
& Siliceous materials reinforced with cellulose fiber manufactured
through autoclaving process to give stable crystalline structure with
minimum compressive strength 225 kg/ sq. cm, bending strength 100
kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with
minimum perforated area 18 % with non woven tissue on the back side,
having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick
rockwool of 48 kg /cum backing. 299.13 sqm

5 MISCELLANEOUS WORK
5.1 Providing & fixing 6mm thick Wood polymer Composite Board(WPC)
(minimum 625 grams per square metre) of Alstone Oligo make or
approved equivalent and shade on existing pre-prepared wall surface
suitable for direct installation with Alstone stixall adhesive or approved
equivalent as per manufacturer's specifications as per approved drawing
complete in all respects and to the entire satisfaction of the Engineer-in-
charge/ consultant / architect. 122.00 sqm
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
5.2
Providing and applying white cement based putty of average thickness 1
mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete. 250.00 sqm

5.3
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required, to
achieve even shade and colour. 2453.89 sqm

5.4 Painting with synthetic enamel paint, having VOC (Volatile Organic
Compound) content less than 150 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required to
achieve even shade and colour.
Two coats 500.00 sqm

5.5 Applying priming coats with primer of approved brand and manufacture,
having low VOC (Volatile Organic Compound ) content.
With ready mixed red oxide zinc chromatic on steel / iron works having
VOC content less than 250 grams/ litre 500.00 sqm

5.6 Providing & Fixing 18 mm thick WPC panels(Wood Polymer Composite-

composed of rice husk & thermoplastic) which is termite proof,
waterproof & screwable of Alstone or approved equivalent of Hybrid
grade including labour , hardware, aluminum support etc. complete in all
respect as per the complete satisfaction of Engineer-in- charge. 100.50 Sqm

5.7 ROLLER BLINDS

Supply of manually operated roller blinds as per approved shade L1-S1
Linen of MAC or approved equivalent make
HARDWARE TOP TUBE : Made of extruded aluminium 38 mm Dia. With
wall thickness of 1.2 mm with spline adoptable to accommodate clutch.
CLUTCH MECHANISM : Moulded plastic having antifriction additive with
Glass fibre reinforcement. Should have a minimum lifting capacity of 8
lbs
OPERATING CHAIN : #PVC ball chain adoptable to the clutch pitch for
smooth lifting & lowering of blind.
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
LOAD TUBE : 38 mm Extruded aluminium wall thickness :1.2 mm + / -
5%
Bonding ( Fabric > Tube ) : 15 mm wide double sided adhesive tape of
3M
Bottom Bar : aluminium extruded box section with powder coatecd finish
matching the roller fabric -Min weight to be 365 gms / Lmr for a perfect
fall of fabric to avoid warpage / floating.Instalattion to be insert type with
end caps.
Screens to be with 5% Openness Composition 22% Polyester + 78%
PVC Wieght 475 gramsper sq.mtr. Thickness 0.68mm 48.06 Sqm

5.8 Providing and fixing factory made precast RCC perforated drain covers,
having concrete of strength not less than M-25, of size 1000 x 450x50
mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross
sectional T.M.T. hoop bars, including providing 50 mm dia perforations
@ 100 to 125 mm c/c, including providing edge binding with M.S. flats of
size 50 mm mm x 1.6 mm complete, all as per direction of Engineer-in-
charge. 158.00 Each

5.9 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in :
Cement mortar 1:4 (1 cement : 4 coarse sand) 3.99 cum

5.10 15 mm cement plaster on the rough side of single or half brick wall of
mix:
1:4 (1 cement : 4 fine sand) 17.36 sqm

5.11 Providing and laying cement concrete in retaining walls, return walls,
walls (any thickness) including attached pilasters, columns, piers,
abutments, pillars, posts, struts, buttresses, string or lacing
courses,parapets, coping, bed blocks, anchor blocks, plain window sills,
fillets, sunken floor, etc. up to floor five level, excluding the cost of
centering, shuttering and finishing :
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) 61.00 cum
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
5.12 Providing & fixing 8mm thick Lacquered glass of approved colour
(flamed red) , fixed with Silicon sealent approved by manufacturer of
glass or with necessary hardware(like screws,studs etc.)if required.The
glass must be properly finished from edges & machine grinded &
polished . The groove between glass to glass joint to be as per drgs
issued by Architect. as per approved drawing complete in all respects
and to the entire satisfaction of the Engineer-in-charge/ consultant /
architect. 78.12 sqm

5.13 Structural steel work in single section, fixed with or without connecting
plate, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete. 2000.00 kg

5.14 Steel work welded in built up sections / framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc. as required.
a) In stringers, treads, landings etc. of stair cases, including use of
chequered plate wherever required, all complete 5000.00 Kg
b) In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works 3000.00 Kg
Note:- Shop drawing for working platform in Auditorium to be
submitted by contractor and work shall be strated only after the
approval of Engineer in charge/IUAC.

5.15 Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733
and IS: 1285, fixing with dash fasteners of required dia and size,
including necessary filling up the gaps at junctions, i.e. at top, bottom
and sides with required EPDM rubber/ neoprene gasket etc. Aluminium
sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminium snap
beading for glazing / paneling, C.P. brass / stainless steel screws, all
complete as per architectural drawings and the directions of Engineer-in-
charge. (Glazing, paneling and dash fasteners to be paid for separately)
:
For fixed portion
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
Anodised aluminium (anodised transparent or dyed to required shade
according to IS: 1868, Minimum anodic coating of grade AC 15) 100.00 Kg

6.0 ART WORK

6.1 Design, Manufacture, Supply and installation of Copper Repousse work
as per organization concept inside IUAC open lobby wall complete as
per the satisfaction of Engineer-in-charge/IUAC. 7.50 Sqm

6.2 Design, Manufacture, Supply and Installation of Mural Work on IUAC

reception interior top wall medium Fibre Glass complete as per the
satisfaction of Engineer-in-charge/IUAC. 30.00 Sqm

6.3 Supply of Artwork Painting in canvas and fixing on wall in Acrylic/Oil

complete as per the satisfaction of Engineer-in-charge/IUAC. 12.00 Sqm

6.4 Design, Manufacture, Supply and insatllation of Sculpture Fibre Glass as

per Organization concept 5ft-6ft height and width 1ft complete as per the
satisfaction of Engineer-in-charge/IUAC. 4.00 Each

6.5 Artwork in interior wall of IUAC auditorium building with Acrylic Paints
complete as per the satisfaction of Engineer-in-charge/IUAC. 25.00 Sqm

Note: For subhead 8 (Art work) Concept of Art work shall be

fnalised by IUAC in writing before executing the work as per the
concept shown by Agency as per the direction of IUAC/RITES.

7.0 Furniture work

7.1 Auditorium Seating chair : Providing and fixing Push Back Chair with cup
holders.
General: Fabricate theater seating with padding and Fire Resistance
fabric covering. Equip each seat with a gravity selfrising mechanism so
that unoccupied seats return to an upright position perpendicular to the
base line of floor of auditorium. Spring compensating mechanism will not
be acceptable. Chair profile with the seat in the upright position and
without a tablet arm, cannot exceed 18”. The chair profile with the seat in
the upright position and with a tablet arm, cannot exceed 24” with
Armrests of the chairs are made out of moulded PPCP with cup holders.
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
Seat Construction: The seat panel shall be 5/8” thick, electronically glued
curved with CRC sheet panel. The padding material shall be 4” thick
polyurethane foam, shall be glued to the inner surface of the seat panel.
The outside surface of the seat panel shall be encapsulated in 1/2” thick
slab polyurethane foam. The complete seat assembly shall be supported
by two 7 gauge formed steel mounting brackets which will attach the
seat assembly to the hinges on the standards. The seat shall have a
built-in counterweight to insure automatic self-rising without the aid of
springs. Arch-spring seat construction will not be acceptable

Back Construction: Solid back construction comprised of a curved flat

iron srip 5 mm thick outer panel fastened solidly and without voids to an
inner structural panel. The outer panel shall be faced one side with
PPCP Grade centered across the width of the panel. The inner panel
shall be 3/8” thick. Both shall be electronically glued CRC sheet and
shall be fastened together with bayonet hanging brackets at the top and
two #8 x 3/4” trim head screws at the bottom, resulting in a rigid
connection with no visible fasteners on the outer panel. The face and
edges of the outer panel shall be stained to match As per the
specification and direction of the Engineer -in- charge.
engineearchitect’s sample. The padding material shall be 1-3/4” thick
polyurethane foam, 2-3/4” thick in the lumbar region, shall be glued to
the inner panel. The complete back assembly shall be supported by two
14 gauge formed steel brackets and two 3/8-16 hex head bolts which will
attach the back assembly to the frame.

Armrests: Shall be PU, nominally 1” thick x 2-1/2” wide x 12” long,

stained to match the outer seat and back panels. The armrest will be
fastened to the steel frame arm support with one 10- 24 x 7/8” flat head
machine screw and one 10-24 x 2-1/4” flat head machine screw into
threaded inserts on the underside of the armrest. Chairs equipped with
tablet arms shall have armrests nominally 1” thick x 2- 1/2” wide x 18”
long and shall be attached to the steel frame arm support with four #8 x
3/4” sheet metal screws.
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
Hinge: The seat hinge shall be a weldment consisting of a 7 gauge hot-
rolled pickled-in-oil steel component and shall be formed and punched to
receive a 0.56” id x 0.75” od x 0.5” long steel bushing. A selflubricating
nylon sleeve shall be fitted between the seat hinge and the standard
seat hinge pin. The hinge shall be machined to provide a positive stop
location for the seat in both occupied and unoccupied positions. The
hinge shall be fitted with a plastic cover to eliminate all pinch points and
shall include a 3/16” thick urethane rubber pad to dampen noise upon
the seat return to the vertical position.
Note – All exposed steel parts to be paint finished in Epoxy. 290.00 Each

7.2
Providing and placing 2 seater sofa Indo make Model: Ceylon or
approved equivalent make. Sofa frame shall be made up of hard wood
and i/c stainless steel spring of 200 mm high in seat jointed with plastic
nivar covered with high quality leatherite The foam shall be made of
polyurethane having density of 40- 45 kg/cubic meter. The rate of high
quality Leatherite used shall be approx Rs. 300/ sq mt. A SPECIAL
TYPE OF UPHOLSTERY IS USED IN THIS SOFA is Microfibre with
Polyester Laminate. IT IS A FABRIC WHICH GIVES A LEATHER FEEL
AND SMOOTH SURFACE. THE FABRIC IS MICROFIBRE WITH
POLYSTER LAMINATED BASE. Slab stock and bonded foam at seat
with recron padding at seat. Backrest is made of slab stock with recron
fillers. Double webbing : Spring and nylon. FRAME MATERIAL: Klin
dried Wood Frame. Seat Foam : Slab stock foam with recron layer. Also
bonded foam used as a supporting material beneath slab stock. Foam
Density : 34 kg/ cubic m. Back Foam : Slab stock foam with recron fill at
back and arms Foam Density : 34 kg/cubic m. Webbing Material : S-
spring along with nylon strips. same expect spring in back covered with
2mm thick PU foam on back side and MS chrome legs . etc the product
should be from BIFMA and FSC Certified Company, complete as per
image/drawing specification under the guidance of Engineer-in-Charge. 6.00 Each

7.3 Providing and placing Seating Benches Understructure made up of 16

guage MS section duly powder coated, frame size 3x1.5inch with seat in
fabric using 2inch foam of 40 micron density on 12mm ply. Back & tablet
in PolyPropylene(PP). The product should be from BIFMA and FSC
Certified Company, complete as per image specification under the
guidance of Engineer-in-Charge.
a 3 seater (Size: 1950mm) 16.00 Each
b 2 seater (Size: 1350mm) 20.00 Each
 (BILL OF QUANTITY)
Name Of Work:- Interior Designing Work of Auditorium including balance Civil Work, Acoustical, Internal electrical and Fire fighting Works at IUAC Campus, New DELHI

S.NO Rate (In figures) Rate (In words) Amount

Description
Qty. Unit
c 1 seater (Size: 750mm) 1.00 Each

7.4 Supplying and placing in position 21 Seater conference table of Indo Model Z-
Line Flexi or approved equivalent make manufacturing as per design, modular
conference table of size of height 750mm, the top of the table shall be made up
of 36mm thick MDF PVC foiled top with decorative anodized sections with
curved shapde pvc foiled leg with 100mm thickness at centre. The modesty
panel of the table shall be 600mm height made of 18mm thick pre-laminated
particle board. The top, legs and modesty panel shall be joined to each other and
with wire managers shall be provided on table top with 62mm dia to hold wires
the product should be from BIFMA and FSC Certified Company, complete as
per image specification under the guidance of Engineer-in-Charge.

21.00 Per seat

7.5 Providing and placing in position Medium back revolving Chair of Indo make
Model: IML 1018 or approved equivalent make. Chair seat & back made up of
hi-quility leatherite made up of 1.2+/-0.1cm thick hot press plywood measured.
Chair upholstered with leatherite and moulded foam. The foam is desinged with
contoured lumber support for extra confort. The seat and back are arrested
together. The P.U. armrest is made of Nylone Chrome and armrest top
upholstered with leatherite. The front pivot synchro tilt mechanism is designed
with features like 360 degree Revolving type, Chair has gas lift mechanism for
height adjustment resting on MS chrome base dia 60-61 cm with superior
quality five castor wheel pronged with steel strip twin castor wheels and Centre
tilt mechanism etc. the product should be from BIFMA and FSC Certified
Company, complete as per image specification under the guidance of Engineer-
in-Charge.
21 Each

7.6 Providing & Placing Reception Counter in 'U' Shape as per drawing with Main
Desk of size - 6600(L) x 750(D) x 1100(ht) with Side Desk on both sides of size
- 2400(L) x 750(D) x 1100(ht). 19mm thick commercial block board with 1mm
thick decorative Laminate as per approved shade on all exposed surfaces of
board. The unit will be having 3 Pedestal of size 400(W) x 450(D) x 700(Ht)
having 2Drawers + 1Filling Drawer in each pedestal, the product should be from
BIFMA and FSC Certified Company, complete as per image specification under
the guidance of Engineer-in-Charge.
1 Each
 (BILL OF QUANTITY)
FIRE-FIGHTING WORK
Item Rate Rate Amount
Description of work Unit
NO. Qty. in words In figures
Sub Head- FIRE FIGHTING SYSTEM
WET RISER SYSTEM
1 Supplying, Installation, Testing and commissioning of electric driven pump set
suitable for automatic operation as per specification as required & comprising
offollowing:-
a) 1 No horizontal foot mounted type Single stage centrifugal split casing pump of
cast iron body and bronze impeller with stainless steel shaft, mechanical seal and
capable of delivering 900 LPM at 56 m head complete with TEFC type squirrel cage
induction motor with class - F insulation , synchronous speed 3000 RPM continuous
duty, designed for operation on 415 +/- 10%, 50 HZ, 3 phase, AC supply with IP 55
class of protection confirming to IS:325 and duly coupled with the pumping set as per
specification.
b) M S fabricated common base plate fabricated from M S Channel of suitable size,
coupling, coupling guard, foundation bolt etc. as required.
c) Suitable cement concrete foundation including vibration isolation by providing
cushy foot mountings duly plastered complete as required.
2 set

2 Providing, laying,testing and Conmmissioning of following sizes of flanzed jointed/

screwed/ welded,"C" class heavy duty MS Pipe as per IS 1239 part I including fittings
like elbow, tees, flanges, tapers, nut bolts, gaskets etc., fixing the pipe on the
wall/ceiling/ on terrace with suitable claimps and painting with two or more coats of
synthetic enamel paint of required shade including chases in brick or RCC Wall/slab
and making good the same..
a) 150mm dia 100 Mtrs
b) 80mm dia 20 Mtrs
c) 25 mm dia 30 Mtrs

3 Providing, laying,testing and Conmmissioning of following sizes of flanzed jointed/

screwed/ welded,"C" class heavy duty MS Pipe as per IS 1239 part I including
fittings like elbow, tees, flanges, tapers, nut bolts, gaskets etc., including excavation
in all kinds of soils , rock , back filling with excavated earth , removal of surplus soil
and providing anit corrosive treatment as per IS-10221 complete as required

a) 150mm dia 375 Mtrs

 (BILL OF QUANTITY)
FIRE-FIGHTING WORK
Item Rate Rate Amount
Description of work Unit
NO. Qty. in words In figures
4 Supply and fixing of G.M. air release valve of 25mm dia in existing pipe line of wet
riser system complete with all respect as per Specification for fire fighting system.
2 Each

5 Providing, Fixing including testing and commissioning of 100 mm dia pressure gauge
of range 0-15 Kg / Sq.cm. having burdon tube of stainless steel 310 in cast
aluminium,stove enameled, black weather proof case with outer, screwed aluminium
nozzle complete with necessary u-type stainless steel siphon tube and cock including
providing suitable painted angle iron support of the tube etc as required.
4 Each

6 Providing, Fixing, Testing and commissioning single headed stainless steel ISI
marked oblique pattern hydrant landing valve with 80mm dia flanged inlet and 63mm
dia instantaneous type female outlet complete with gum metal cap and chain and all
accessories as per IS-5290-1983.
12 Each

7 Providing Fixing, Testing and commissioning of 2 way fire service inlet with cabinet &
connection with 63 mm dia built in spring type non return coupling fitted on existing
100 mm dia G.I. pipe inlet header etc. as per specification complete as reqd.
1 Each

8 Providing and Fixing of 63 mm dia 15 mtr long (polyester fiber type) RRL hose pipe
Confirming to IS:636-1992 Part-II with male and female Gun metal couplings duly
binded with GI wire, rivets etc. as required. 12 set

9 Providing and Fixing of 63 mm dia 15 mtr long controlled percolating Hosepipe

Confirming to IS:8423 male and female Gun metal couplings duly binded with GI
wire, rivets etc. as required. 12 set

10 Providing and fixing fire man axe as required complete in all respects. 6 Each

11 Providing and fixing 63 mm dia stainless steel branch pipe with 20 mm (nominal
internal diameter) as per IS:903 size stainless steel nozzle,suitable for instantaneous
connection to interconnect hose pipe coupling as required. 12 Each
 (BILL OF QUANTITY)
FIRE-FIGHTING WORK
Item Rate Rate Amount
Description of work Unit
NO. Qty. in words In figures
12 Providing and fixing first aid hose reel with MS construction spray painted in post
office Red, with up-to-date amendments complete with the following as required :(a)
30m long 20mm (nominal internal) dia water hose Thermoplastic (Textile reinforced)
Type-2 as epr IS:444 with stainlees steel /gunmetal sgut off Nozzle having 5mm dia
orifice. (b) 20mm (nominal internal) dia stainless-steel globe valve & nozzle. (c)
Drum and brackets for fixing the equipment on wall. (d) Connections from riser with
25 mm dia ball valve .
6 Each

13 Providing and fixing the following sizes flanged type ISI marked non-return valves of
C.I. body and bronze/gun metal seat, complete with bolts, nuts, rubber insertions etc.
as required.
150 mm dia (horizontal) 4 Each

14 Providing and fixing following sizes ISI marked butterfly valves of cast iron body and
bronze/Stainless steel seat PN 1.6 complete with accessories such as nut, bolt,
rubber insertions complete with testing, commissioning etc. as required.
a 150nn dia 8 Each
b 80 mm dia 4 Each

15 Providing & Fixing Pump ON -OFF push button type remote switches at ground floors
i/c connection with multi core control wiring from starter panel as reqd. 2 Each

16 Supplying, Laying & Fixing on wall / surface one no. XLPE insulated, & PVC
sheathed armoured copper conductor cable of 1.1 KV grade on surface / cable tray
as required.
a) 4 x 2.5 Sq.mm+2x2.5 Sqmm earth wire 50 Mtrs
b) 2 x 6 Sq.mm+1x6 Sqmm earth wire 30 Mtrs
 (BILL OF QUANTITY)
FIRE-FIGHTING WORK
Item Rate Rate Amount
Description of work Unit
NO. Qty. in words In figures
17 Fabrication, Supply, Installation, Testing and commissioniong of floor/wall mounted
compartmentalized with hinged lockable doors cubical electrical control panel of
suitable size fabricated from CRCA sheet of 2 mm thick, dust and vermin proof,
powder coated of approved shade after chemically treated with seven tank process,
cable alley, suitable for operation on 3 phase 415 volt 50 Hz AC supply i/c providing
and fixing following switch gear to be mounted on complete with gaskets,
interconnections and earthing etc. as required. The enclosure protection class shall
be of IP 54. ( For wet riser system) (General arrangement and schematic Drawings to
be approved by the department before start of fabrication)
Incomer
a) 100 ATPMCCB 35 KA, (ICS= ICU)-1 No
b) 100 A rating 4 strip tinned copper sleeved bus bar - 1 set
c) 1 set - multifunction digital meter to read V, Amp, KW,
KWH with 3 nos. Suitably rated CT's class 1.0
accuracy and 15 VA burden.
d) 3 Nos. Phase indication LED lamps with back up SPMCB.
Outgoing
a) 63 Amp TP MCCB, 10KA , (ICS= ICU) -2 nos.
b) Suitable DOL starter with over load protection, curent sensing type single phase
preventor complete with all accessories and internal wiring required for automatic
operation of terrace pumps - 2 Sets
c) Selector switch for local/remote, auto/ manual/off operation, push buttons for
ON,OFF, in manual mode, LED type ON/ OFF 3 phase indication lamps with Toggle
switch- 2 Sets
d) Digital ammeter with selector switch and suitable CT's - 2 Sets
1 set

18 Pdg. and fixing of following sizes stop/drain valve of Stainless Steel for testing the
drain system as required.
a) 40 mm dia ( in Delivery pumps.) 1 Each

19 Providing and fixing of cast iron Double flanged y type strainer of folloing size:
a 150mm 2 Each
 (BILL OF QUANTITY)
FIRE-FIGHTING WORK
Item Rate Rate Amount
Description of work Unit
NO. Qty. in words In figures
Indoor type hose cabinet frames fabricated from 40x40x5 mm angle iron sections and
full front glass door and locking arrangment. Suitable to accommodate 2-nos landing
valve, 2-nos15mtr hoses1-no first aid hose reel and 1-no branch pipe. The cabinet
20
frame shall be painted with one coat of primer and two or more coat of synthetic
enamel paint of approved make and shade as required size 2x1.2mtr.
6 Each

Weather proof Hose Box fabricated out of 1.8 mm thick M.S. sheet complete with
21 glass in front having locking arrangement, suitable to accommodate all the necessary
fittings etc. 6 Each

Total
 BILL OF QUANTITY
ELECTRICAL WORKS
Item DSR Rate Rate AMOUNT
S. No. Description of work Qty.
2014 Unit In words In Figures
SUB-HEAD-I-INTERNAL ELECTRICAL WORK
WIRING IN STEEL CONDUIT
1.1) 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable in surface / recessed steel conduit, with modular
switch,modular plate, suitable GI box and earthing the point with
1.5sq.mm. FRLS PVC insulated copper conductor single core cable
etc as required.
a) 1.3.3 Group C Point 605

1.2) N.S Wiring for light point/ fan point/ exhaust fan point/ call bell point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable
With modular switch, modular plate, suitable GI box and earthing
Point 190.00
the point with 1.5 sq.mm. FRLS PVC insulated copper conductor
single core cable etc as required in existing Conduit.

1.3) 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed
medium class PVC conduit, 2 way modular switch, modular
Point 15
plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.

1.4) 1.31 Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular
switch, connection etc. as required. (For light plugs to be used in Each 223
non residential buildings).

1.5) 1.32 Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
Each 99
fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16
amps modular switch, connection etc. as required.
1.6) 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type,
socket outlet, with 2 pole and earth, metal enclosed plug top
alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure,
on surface or in recess, with chained metal cover for the socket
Each 12
out let and complete with connections, testing and commissioning
etc. as required.

1.7) NS SITC of following size of Isolator/ MCB/ MCCB breakers MS box

(indoor/outdoor) type including MCB/ MCCB with suitable space for
both end terminations fixing arrangement on surface / in recessed
manner as per site requirement etc. Complete as required.

63Amps 4 Pole MCB isolator Each 10

1.8) 1.7 Wiring for circuit wiring alongwith earth wire with the following sizes
of FRLS PVC insulated copper conductor, single core cable in
surface/ recessed steel conduit as required
a) 1.7.1 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire Metre 4560
b) 1.7.2 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire Metre 8500
c) 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 6500
d) 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 4500
e) 1.7.10 4 X 10 sq. mm + 2 X 10 sq. mm earth wire Mtrs 1000
f) 1.7.11 4 X 16 sq. mm + 2 X 16 sq. mm earth wire Mtrs 1200
g) NS 4 X 25 sq. mm + 2 X 25 sq. mm earth wire Mtrs 1200

1.9) 1.17 Supplying and drawing following sizes of FRLS PVC insulated
copper conductor, single core cable in the existing surface/
recessed steel / PVC conduit as required
a) 1.17.12 3 x 2.5 sq. mm Metre 700
b) 1.17.21 3 x 4 sq. mm Metre 650
c) 1.17.30 3 x 6 sq. mm Metre 400

1.1) 1.25 Supplying and fixing stepped type electronic fan regulator on the
existing modular plate switch box including connections but Each 9
excluding modular plate etc. as required.

1.11) 1.26 Supplying and fixing modular blanking plate on the existing modular
plate & switch box excluding modular plate as required. Each 150

TOTAL SUB-HEAD-I
 SUB-HEAD-II-WIRING FOR T.V, TELEPHONE & DATA.

2.1) 1.24 Supplying and fixing following modular switch/ socket on the existing
modular plate & switch box including connections but excluding
modular plate etc. as required.
a) 1.24.6 Telephone socket outlet Each 35
b) 1.24.7 TV antenna socket outlet Each 2
b) NS RJ - 45 Jack computer socket outlet Each 42

2.2) 1.27 Supplying and fixing following size/ modules, GI box alongwith
modular base & cover plate for modular switches in recess etc as
required.
a) 1.27.1 1 or 2 Module (75mmX75mm) Each 77

2.3) 1.28 Supplying and fixing following Modular base & cover plate on
existing modular metal boxes etc. as required.
a) 1.28.1 1 or 2 Module Each 77

2.4) 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC
insulated annealed copper conductor, unarmored telephone cable in
the existing surface/ recessed steel/ PVC conduit as required.

a) 1.18.2 2 Pair Mtrs 1350

b) 1.18.3 4 Pair Mtrs 450

2.5) 1.18 Supplying and drawing Co-axial TV cable RG-6 grade, 0.7mm solid
copper conductor PE insulated, shileded with fine tinned copper
Mtrs 300
braid and protected with PVC sheath in the existing surface/
recessed steel/ PVC conduit as required.

2.6) 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the
Mtrs 1750
existing surface/ recessed steel/ PVC conduit as required.

2.7) 1.20 Supplying and fixing of following sizes of steel conduit along with
accessories in surface/recess including painting in case of
surfaceconduit, or cutting the wall and making good the same in
case of recessed conduit as required.
a) 1.20.1 20 mm Mtrs 4500
b) 1.20.2 25 mm Mtrs 8500
c) 1.20.3 32 mm Mtrs 1200
2.8) 1.21 Supplying and fixing of following sizes of medium class PVC conduit
along with accessories in surface/recess including cutting the wall
and making good the same in case of recessed conduit as required.

a) 1.21.1 20 mm Mtrs 1250

b) 1.21.2 25 mm Mtrs 1850
c) 1.21.3 32 mm Mtrs 400

2.9) MR Supply Installation testing commissioning in position the following

sizes of powder coated MS housing for telephone tag block with
hinged & lockable door including supply & fixing of tag block made
out from self extinguishing polystrene material, corrosion resistant,
highly resistant to shock, strudy and maintenance free KRONE type
telephone tag block complete as required.

a) MR 10 Pair Each 3
b) MR 20 Pair Each 1
c) MR 100 Pair Each 1

3.0) MR Supply, laying, testing and commissioning of the following multi core
0.61 mm annealed tinned copper conductor PVC insulated and PVC
sheathed and overall PVC sheathed armoured/ unarmoured
telephone cables generally conforming to ITD s/WS-11-B and IS
1554 Part I as required and including making terminal joints,
complete as required.
a) MR 10 Pair Meter 350
b) MR 20 Pair Meter 155

TOTAL SUB-HEAD-II

SUB-HEAD-III- INSTALLATION OF LIGHT FITTINGS

3.1) 1.45 Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5 sq.
mm FRLS PVC insulated, copper conductor, single core cable, Each 9
including providing and fixing phenolic laminated sheet cover on the
fan box etc. as required.
3.2) 1.47 Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15
mm dia, heavy gauge including painting etc. as required. (Note :
More than 5 cm length shall be rounded to the nearest 10 cm and
5 cm or less shall be ignored) Each 9

3.3) 1.50 Installation of exhaust fan in the existing opening, including making
good the damage, connection, testing, commissioning etc. as
required.

(a) 1.50.1 Upto 450 mm sweep Each 15

3.4) 1.51 Extra for fixing the louvers/ shutters complete with frame for a
Each 15
exhaust fan of all sizes.

TOTAL SUB-HEAD-III

SUB-HEAD-IV- SUPPLY OF LIGHT & FAN FIXTURES

4.1) NS Supply ,fixing , testing and commissioning of 15W LED Resses
mounted luminaire Down Light fixture all accessories as required.
Model: Bajaj Cat No. BZSLO 15W WH PRO or equivalent.
Each 43

4.2) NS Supply ,fixing , testing and commissioning of 12W LED Resses

mounted luminaire Down Light fixture all accessories as required.
Model: Bajaj Cat No. BZSLH 12W WH or equivalent.
Each 35

4.3) NS Supply ,fixing , testing and commissioning of 32W LED Resses

mounted luminaire Down Light fixture all accessories as required.
(Model: Wipro LM26-361-XXX-57-XX) or equivalent.
Each 77

4.4) NS Supply ,fixing , testing and commissioning of 13W LED 2 feet tube
light/mirror Light fixture all accessories as required. Model: Havells
Cat No. LHDT15113631 or equivalent. Each 14

4.5) NS Supply ,fixing , testing and commissioning of 10W LED Bulk Head
Light fixture all accessories as required. Model: Bajaj Cat No.
BIBWP 10W LED or equivalent. Each 9
4.6) NS Supply ,fixing , testing and commissioning of 20W LED
Surface/Wall Mounted tube light fixture all accessories as
required.Model: Bajaj Cat No. BN150W LED20S-6500 PSE OD GR
or equivalent. Each 50
4.7) NS Supply ,fixing , testing and commissioning of 15W LED Surface
Mounted square downlight fixture all accessories as required.
Model: Bajaj Cat No. BGSLO Sleek Surface 15 WH SQ or
equivalent. Each 42

4.8) NS Supply ,fixing , testing and commissioning of 36W LED Resses

square 600mm x 600mm Light fixture all accessories as
required.Model: Bajaj Cat No.BPRF 36W WH SL LED or
equivalent. Each 148

4.9A NS Supply ,fixing , testing and commissioning of 15W LED

Step light fixture all accessories as required.Model: Philips Cat
No.BWG150 LED50/WW PSU 220-240V IP67 7043 or equivalent.
Each 24
4.9B NS Supply ,fixing , testing and commissioning of less then 4 W LED
Step light fixture all accessories as required.Model: Philips Cat
No.BWG150 C14 IP67 7043 or equivalent.C14
Each 64

4.10 NS Supply ,fixing , testing and commissioning of 35W LED

Resses/Surface mounted luminaire Down Light fixture all
accessories as required. Model: Wipro Cat No. LM71-441-XXX-57-
XX or equivalent. Each 20

4.11) NS Supply ,fixing , testing and commissioning of 36W LED Suspanded

& Surface mounted luminaire Down Light fixture all accessories as
required. Model: Philips Cat No. SP525PLED 36S-6500 PSU WH
or equivalent. Each 20

4.12) NS SIT and comminissioning Indoor emergency exit sign wall / pendent
mounting luminair with ihour backup complete with all accessories .
Viewing earter from one side for wall mounting type or viewing from
two sides suspended type all accessories as required. Model: Bajaj
Cat No.BESL 03 LED DSD WBB Red or equivalent.
Each 11
4.13) NS Supply, installation, testing and commissioning of LED Flexible Strip
light 4-5 Watt/mtr of approved color for indoor mounting with
transformer/Driver unit at every 5 mtrs complete in all respects.
Model: Bajaj Cat No. BCFL 300 25W IP20 or equivalent.
mtrs. 25

4.14) NS Supply , fixing of Ventilation, fans up to 300mm sweep in the

existing opening including making good the damage connection
testig commisining Including louvers/ shutters complete with frame
for a exhaust fan of all size etc. as required.
Each 15

4.15) NS Supply of ISI marked energy efficient sweep ceiling fan with double
ball bearing , motor ,blades , down rod , canopies , capacitor etc .
Suitable for operation on 230 volts , 50 Hz. , single phase , AC
supply complete as required of and as per specifications attached
.(1200mm Sweep) Each 9

4.16) NS Supply , fixing of Wall fans up to 600mm sweep including making

good the damage connection testig commisining extra for fixing
complete as required. Each 42

TOTAL SUB-HEAD-IV

SUB-HEAD-V-DISTRIBUTION BOARD & MCCB, MCB

5.1) 2.7 Supplying and fixing following way prewired SP&N MCB
distributionboard of steel sheet for 240 volts on surface/ recess
completewith loose wire box, terminal connectors for all incoming
andoutgoing circuits, duly prewired with suitable size FRLS PVC
insulated copper conductor up to terminal blocks, tinned copper
bus bar, neutral link, earth bar, din bar, detachable gland plate,
interconnections, powder painted including earthing etc. as
required. (But without MCB/ RCCB/ Isolator)

b) 2.7.6 2 + 12 way/14 way, Double door Each 2

5.2) 2.8 Supplying and fixing following way prewired TP&N MCB
distributionboard of steel sheet for 415 volts on surface/ recess
completewith loose wire box, terminal connectors for all incoming
andoutgoing circuits, duly prewired with suitable size FRLS PVC
insulated copper conductor up to terminal blocks, tinned copper
bus bar, neutral link, earth bar, din bar, detachable gland plate,
interconnections, powder painted including earthing etc. as
required.(But without MCB/ RCCB/ Isolator)

a) 2.8.5 4 way (4 + 12), Double door Each 2

b) 2.8.6 6 way (4 + 18), Double door Each 2
c) 2.8.7 8 way (4 + 24), Double door Each 2
d) 2.8.8 12 way (4 + 36), Double door Each 3

2.9 Supplying and fixing following way prewired vertical type TP&N
MCB distribution board of steel sheet for 415 volts on
surface/recess complete with loose wire box of sheet steel, dust
protected, duly powder painted, inclusive of 200 amps tinned copper
bus bar, common neutral link, earth bar, din bar for mounting
MCB’s, terminal connectors for all incoming and outgoing circuits,
duly prewired with adequate size of FRLS PVC insulated copper
conductor upto the terminal connector/ neutral link, earthing etc as
required (But without MCB/ RCCB/ Isolator). (Note : Prewired
vertical type MCB TPDB is normally used where 3 phase outlets are
required.)
2.9.6 6 way Double door Each 1

5.3) 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C”
curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with connections,
testing and commissioning etc. as required.

a) 2.10.1 Single pole Each 244

5.4) 2.12 Supplying and fixing following rating, double pole, 240 volts,
isolatorin the existing MCB DB complete with connections, testing
andcommissioning etc. as required.
a) 2.12.2 63 amps Each 2
5.5) 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator
in the existing MCB DB complete with connections, testing and
commissioning etc. as required.

a) 2.13.1 40 amps Each 20

b) 2.13.2 63 amps Each 4
c) 2.13.3 100 amps Each 3

5.7) 2.11 Supplying and fixing single pole blanking plate in the existing MCB
DB complete etc. as required. Each 65

TOTAL SUB-HEAD-V

SUB-HEAD-VI-CABLE TRAYS
6.1) 4.1 Supplying and installing following size of perforated pre-painted
M.S. cable trays with perforation not more than 17.5%, in
convenient sections, joined with connectors, suspended from the
ceiling with M.S. suspenders including bolts & nuts, painting
suspenders etc as required.

a) 4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Mtrs 75

b) 4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Mtrs 80
c) 4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Mtrs 130
d) 4.1.6 450 mm width X 50 mm depth X 2.0 mm thickness Mtrs 150

6.2) 4.2 Supplying and installing following size of perforated pre-painted

M.S. cable trays bends with perforation not more than 17.5%,,
joined with connectors, suspended from the ceiling with M.S.
suspenders including bolts & nuts, painting suspenders etc as
required.
a) 4.2.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 20
b) 4.2.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 25
c) 4.2.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 35
d) 4.2.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 40

6.3) 4.3 Supplying and installing following size of perforated pre-painted

M.S. cable trays reducers with perforation not more than 17.5% in
convenient sections, joined with connectors, suspended from the
ceiling with M.S. suspenders inluding bolts & nuts, painting
suspenders etc as required.
a) 4.3.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 13
b) 4.3.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 10
c) 4.3.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 10
d) 4.3.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 12
6.4) 4.4 Supplying and installing following size of perforated pre-painted
M.S. cable trays tee's with perforation not more than 17.5% in
convenient sections, joined with connectors, suspended from the
ceiling with M.S. suspenders inluding bolts & nuts, painting
suspenders etc as required.
a) 4.4.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 10
b) 4.4.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 10
c) 4.4.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 10
d) 4.4.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 10

6.5) 4.5 Supplying and installing following size of perforated pre-painted

M.S. cable trays cross members with perforation not more than
17.5% in convenient sections, joined with connectors, suspended
from the ceiling with M.S. suspenders inluding bolts & nuts, painting
suspenders etc as required.
a) 4.5.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 10
b) 4.5.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 10
c) 4.5.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 10
d) 4.5.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 10

6.6) MR Supplying and fixing of following recessed type raceway made out
of 2mm thich G.I sheet complete with joints, horizontal bends ,
vertical bends , level adjustment including cutting of floor & finishing
the same including actual size of Junction box etc. as required.

a) MR 100mmX40mm (Nominal) Metre 100

b) MR 150mmX40mm (Nominal) Metre 100

6.7) Providing & fixing in of following sizes of powder coated 14 SWG

MS Junction Box in floor with 3mm thick stainless steel cover
including all necessary hardware as required for fixingcomplete with
cutting of floors & making good of the same.

a) MR 100mm x 100mm x 50mm Junction box Each 72

b) MR 150mm x 150mm x 50mm Junction box Each 25

TOTAL SUB-HEAD-VI

SUB-HEAD-VII CABLES
7.3) M.R. Supply of following size of 1.1kv grade multicore aluminium
conductor XLPE insulated and PVC sheathed armoured cable as
per IS : 7098:1988 with upto date amendments.
(a) M.R. 3.5 core, 240 Sq.mm. Meter 120
(b) M.R. 3.5 core, 150 Sq.mm. Meter 120
(c) M.R. 3.5 core, 120 Sq.mm. Meter 150
(d) M.R. 3.5 core, 95 Sq.mm. Meter 200
(e) M.R. 4 core, 35 Sq.mm. Meter 240
(f) M.R. 4 core, 25 Sq.mm. Meter 300

7.4) 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE
power cable of 1.1 KV grade of following size direct in ground
including excavation, sand cushioning, protective covering and
refilling the trench etc as required.

(a) 7.1.1 Upto 35 sq. mm Meter 540

(b) 7.1.2 Above 35 sq. mm and upto 95 sq. mm Meter 200
(c) 7.1.3 Above 95 sq. mm and upto 185 sq. mm Meter 270
(d) 7.1.4 Above 185 sq. mm and upto 400 sq. mm Meter 120

7.5) 9.1 Supply and making end termination with flame proof double
compression brass gland and aluminium thimbles for XLPE
insulated and PVC sheathed aluminium conductor cable of 1.1kv
grade of the following sizes as required.
(a) 9.1.29 3½ X 240 sq. mm (62mm) Each 2

(b) 9.1.26 3½ X 150 sq. mm (50mm) Each 2

(c) 9.1.25 3½ X 120 sq. mm (45mm) Each 2

(d) 9.1.24 3½ X 95 sq. mm (45mm) Each 2

(e) 9.1.35 4 X 35 sq. mm (32mm) Each 10

(f) 9.1.34 4 X 25 sq. mm (28mm) Each 10

7.6) 2.22 Providing and fixing H.T. danger notice plate of 250 mm X 200 mm,
made of mild steel, at least 2 mm thick, and vitreous enameled
white on both sides, and with inscription in single red colour on front
side as required. Each 4
7.7) 14.14 Providing, laying and fixing following dia RCC pipe NP2 class (light
duty) in ground complete with RCC collars, jointing with cement
mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep)
and refilling etc as required.
14.14.2 150 mm dia. Meter 20
14.14.3 250 mm dia. Meter 20

TOTAL SUB-HEAD-VII
 SUB HEAD VIII - LIGHTINING PROTECTION AND
EARTHING SYSTEM
8.1) 6.2 Providing and fixing of lightning conductor finial, made of 25mm dia
300mm, long GI tube, having single prong at top, with 85mm dia.
6mm thick GI base plate including holes etc. complete as required.
Each 4

8.2) 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of
the finial or any other metallic object) by riveting / nut bolting/
sweating and soldering etc as required. Each 2

8.3) 6.7 Providing and fixing G.I. tape 20mm x 3mm thick on parapet or
surface of wall for lightning conductor as required (For horizontal
run) Metre 350

8.4) 6.8 Providing and fixing GI tape 20mm x 3mm thick on parapet or
surface of wall for lightning conductor as required. (for vertical run).
Metre 150

8.5) 6.12 Providing and fixing testing joint, made of 20mm x3mm thick GI
strip, 125mm long, with 4 nos. of GI bolts, nuts, check nuts and
spring washers etc.complete as required. Each 2

8.6) 6.14 Providing and laying GI tape, 32mm x 6mm thick, from earth
electrode directly in ground as required. Metre 150

TOTAL SUB-HEAD-VIII

SUBHEAD - IX - EARTHING SYSTEM :

9.1) NS Supply and fixing of Alltec UL Listed make long life Maintenance
Free “C” Bar Earthing System with constant performance service
warranty “C” Bar & Tape Connector should be17.6 mm Copper
Cladded Rod - UL Listed, 250 Micron, 8 / 10 Ft Long with Exo
Thermic Weld T Weld Connector. The system with Rod to tape
jointer rated for high fault currents up to 10kA, which does not
require manual addition of water. The system installed with ALLTEC
- TerraFill TF 50 & TF- 50 XT BackFill should RoHS & Low
resistivity Certified. The BackFill having not more than 0.20 Ohm/cm
resistance, eco friendly, non degradable and non soluble. The
earthing pit shall be designed and supplied with Poly-plastic Pit
Cover non conductive, environment friendly.
Set 8
 9.3) 5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.
pipe from earth electrode including connection with brass nut, bolt,
spring, washer excavation and re-filling etc. as required
Meter 400

9.4) 5.14 Providing and fixing 25 mm x 5 mm copper strip on surface or in

recess for connections etc. as required. Meter 450

9.5) 5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe
from earth electrode including connection with G.I. nut, bolt, spring,
washer excavation and re-filling etc. as required. Meter 250

9.6) 5.15 Providing and fixing 25 mm x 5 mm G.I strip on surface or in recess

for connections etc. as required. Meter 150

9.7) 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for
loop earthing as required. Meter 1500

TOTAL SUB-HEAD-IX

SUB HEAD - X : LT Panel

10.11) UPS Panel:

MR Supplying, fixing, connecting, testing and commissioning of sheet
steel cubicle type panels floor / wall mounted type fabricated from
16 gauge CRCA sheet, dust and vermin proof, indoor type TPN
Main board with hinged lockable doors fabricated from 14 gaug

Type of construction: Form 3, IP classification: 42

The internal control wiring shall be fuse less. All control wiring and
metering protection shall be by MCB's.
Color: Siemens color code 7032 Powder Coated, as per approved
sample.
Incomer
1nos 150A TPN MCCB 25kA with inbuilt Microprocessor release
with rotary handle handle.
1 set 96mm x 96mm Voltmeter (0-500V) with 3 way and OFF
selector switch.
1set 150/5A CTs for metering
1 set 96mm x 96mm Ammeter (0-150A) with 3 way OFF selector
switch.
1 set of three phase indicating lamps with 2A SP MCB for
protection.
 Busbar: 200A TPN Aluminum with Heat Shrink Sleeve
Outgoing:
63A FP MCB - 3 Nos.
40A FP MCB - 1 Nos.
40A DP MCB - 14 Nos.
Spare
63A FP MCB - 2 Nos.
40A FP MCB - 2 Nos.
40A DP MCB - 2 Nos.
Complete with above items. Sets 1

TOTAL SUB-HEAD-X

SUB HEAD - XI : FIRE DETECTION WORK

Supply, Installation,Testing & Commisioning of Microprocessor

based ,4 loop fire alarm control panel fully networkable with each
loop capable of taking minimum 127 devices in any combination,
minimum 5.7" TFT display The panel shall be soft addressable type.
The panel shall be able to give pin point location of all fire/fault
conditions. Further, the panel must be able to automatically
switch off respective control switches when ever any alarm is
triggered.The panel shall have hot redundancy (CPU & Power
Supply) as incase of faliure of one CPU/Power Supply the
11.1 M.R. Each
other (redundant ) CPU/Power Supply should take over fully
without any delay and manual intervention. The panel shall
have in built rectifier, provision for external printer (if
required),Loop cards, Display to indicate Fire/Fault Signal with
address and analog output, complete in all respects, integral SMF
lead acid batteries with sealed cells of 24 V capable of running for a
minimum of 8 hours in normal condition and 30 minutes in alarm
condition with integral battery charger complete as required and as
per specification complete as required.
1
 Supply, Installation,Testing & Commisioning of Analog Addressable
Intelligent Automatic adaptable to varying environment
conditions , multisensor detector with inbuilt optical smoke
sensors as well as additional heat detector sensor with
11.2 M.R. Each
decentralise intelligence, soft addressable Photothermal type with
inbuilt fault isolator as per NFPA style 7 wiring with LED Blinking
display complete with base as required
148

Supply, Installation,Testing & Commisioning of Analogue

Addressable Intelligent Automatic adaptable to varying
environment conditions ,Heat Detector with fixed & rate of rise
11.3 M.R. temperature function with decentralise intelligence , soft Each
addressable type, with inbuilt fault isolator as per NFPA style 7
wiring with LED blinking display complete with base as required.
3

Supply, Installation,Testing & Commisioning of Addressable Manual

11.4 M.R. Call Point soft addressable type with in built fault isolator complete Each
as required. 9

Supply, Installation, Testing & Commissioning of Loop Powered

Addressable Hooter cum strobe complete as required , no
11.5 M.R. Each
additional Control module and cable is permited complete as
required 9

Supplying, assembling, erection, testing & commissioning of

Response Indicator which consists of steady glowing LED. This
LED shall be mounted within a M.S. box and connected in parallel to
11.6 M.R. Each
the built in indicator of the detector as per specifications. The RI
shall come "ON" as soon as the detector activates complete as
required 24
Supplying, fixing, testing and commissioning of Addressable Control
module for AHU tripping/ damper control/ Lift well Pressurization
11.7 M.R. Each
fans/ Lift lobby pressurization fans/ Stairwell Pressurization fan
monitoring etc. as required. 14

Supplying, fixing, testing and commissioning of Addressable Monitor

11.8 M.R. module with inbuilt isolator for Flow Switch Monitoring and any Each
integration etc complete as required 8
 Supplying, assembling, erection, testing & commissioning of Fire
11.9 Fighter's Two way talk back panel fitted on wall , complete in all Each
respects as per specifications. complete as required 1

Supplying, assembling, erection, testing & commissioning of , red

coloured Fire Fighter's Telephone jack fitted on wall including the
11.10 M.R. cost of breaking and making good the wall wherever required, Each
complete in all respects as per specifications complete as required
9

Supplying, assembling, erection, testing & commissioning of 2 way

11.11 M.R. fire fighter's telephone handset complete in all respects as per Each
specifications complete as required 2

Supply, Installation,Testing & Commisioning of Repeater Panel

(LCD indicator panel) with 2 line X 20 characters alpha numeric
11.12 M.R. Each
LCD display with all commands such as reset, mute, silence with
suitable battery backup complete as required 1

Supplying, installation, testing & commissioning of PVC insulated 2

x 1.5 sq.mm twisted pair FRLS copper conductor flexible cable with
11.13 M.R. Metre
terminations on each end with ferrules etc. in the existing conduit
complete as required. 1900

Supplying, installation, testing & commissioning of Self illumination

EXIT Signage's 4" x 12 " size as required & approved by the
11.14 M.R.
Consultant/ Engineer Incharge complete as required

(a) M.R. Double arrow exit Each 4

(b) M.R. Double side single left/ right arrow exit Each 5

(c) M.R. Hydrant signage Each 5

TOTAL SUB-HEAD-XI

SUB-HEAD-XII : PA SYSTEM
Supply, Installation, Testing & Commissioning of IP based
Networkable touch screen paging station for selection of zones,
supervision of system status, setting of scheduled broadcasts with
12.1 M.R. Set
the following functions: Built-in monitoring loudspeaker, Detachable
goose-neck microphone, LCD touchscreen display complete as
required 1
 Supply, Installation, Testing & Commissioning of 8 zone IP based,
digital Voice Alarm controller expandable upto 256 zones. The voice
alarm controller should be able to connect directly over existing
Ethernet. It should have functions like the audio playing, zone
12.2 M.R. control, fault monitoring, log recording, volume control and amplifier
Set
switchover. The Voice alarm controller should also have the
following functions: 255 Priorities, Time schedule broadcasts,
Capable of amplifier redundancy, 8 trigger inputs/outputs, 4
simultaneous audio messages per controller complete as required
1

Supply, Installation, Testing & Commissioning of 1X500W Class-D

Amplifier with 1 independent channel and can provide automatic re-
settable overcurrent, overload, overheating, overvoltage, under-
voltage and DC protection. Can do automatic switchover if used as
12.3 M.R. Set
hot standby amplifier. Should take audio Input from controller
through ethernet via RJ45 port. Freq Response of 70Hz - 18KHz,
SNR > 100dB complete as required
4

Supply, Installation, Testing & Commissioning of 20W column

loudspeaker with max SPL1M 102dB . Vertical Disperion 80 degree.
12.4 M.R. Horizontal Dispersion 90 degree. Frequency response of 120Hz - Each
20KHz. Weather resistant to IP44 complete as required
24

Supply, Installation, Testing & Commissioning of 6W Ceiling

Speaker with max SPL1M 96dB . Frequency response of 80Hz-
12.5 M.R. Each
20KHz with a dispersion angle of 160 deg. The speaker should have
tappings at 6W/3W complete as required 124

Supplying and drawing following sizes of FRLS PVC insulated

flexible copper conductor, single core cable in the existing surface/
12.6 M.R.
recessed PVC/steel conduit/ PVC casing and capping as required :

a) M.R. 3 x 1.5 Sq.mm. Meter 192

b) M.R. 3 x 2.5 Sq.mm. Meter 200

Supplying, laying, terminating & connecting of 2 core 24/0.20mm

flexible copper conductor cable with terminations, labour and other
12.7 M.R. Metre
petty material etc. complete in all respect etc complete as required.
800
 Fabrication, supplying & installing of M.S. rack of 20U size duly
12.8 M.R. powder coated to accommodate item 1,2 & 3 as above etc complete Each
as required. 1

TOTAL SUB-HEAD-XII

SUB HEAD-XIII: CCTV SURVEILLANCE SYSTEM

13.1 M.R. Fixed color camera with indoor housing

Supply, Installation, Testing & Commissioning of 1080P 25/20fps IP
Fixed True Day/Night inbuilt IR Box Dome Camera, fixed 3.6 mm,
H.264, PoE, DC12V/AC24V, ONVIF with all accessories like tamper Nos.
proof screws, clamps, wiring etc. complete as required.
17

13.2 M.R. Fixed color camera with outdoor housing

Supply, Installation, Testing & Commissioning of 1080P 25/20fps IP
Fixed True Day/Night inbuilt IR Box Dome Camera, Vari-focal 2.8-
12mm, H.264, PoE, DC12V/AC24V, ONVIF with all accessories like No.
tamper proof screws, clamps, wiring etc. complete as required.
11

13.3 M.R. Box Color Camera

Supply, Installation, Testing & Commissioning of 1080P 25/20fps IP
Fixed True Day/Night inbuilt IR Box Camera with Vari-focal 2.8-
12mm, H.264, PoE, DC12V/AC24V, ONVIF with all accessories like No.
Outdoor weatherproof Housing, brackets, tamper proof screws,
clamps, wiring etc. complete as required. 15

13.4 M.R. CCTV Monitors

Supply, installation, testing & commissioning
No.
of 42" Flat LED Color Monitors etc complete as required. 3

13.5 M.R. Power Supply

Supply, Installation, Testing & Commissioning of SMPS Power
Supply with battey backup for Bullet cameras etc complete as No.
required. 16

13.6 M.R. NVR

 Supply, installation, testing & commissioning of Network Video
recorder, All-in-one recording, dual stream, e-signature, electronica
Image stabilization, de-fog, viewing, virtual disk quota management,
and management solution for network surveillance systems of up to
32 channels, HDMI Output(1080p), RAID 6/10 controller, 7 x 4 TB
,surveillance systems of up to 32channels (all channels pre-
licensed), 8 x HDD (4 TB) max, 2 nos e-SATA for backup, No.
redundant ethernet, redundant power supply, Operating Temerature
-10 °C to +55 °C, NVR shall have Video Motion Detection (VMD)
facility for individual camera, hot swappable HDD, sufficient video
recording capacity & complete as per specifications etc complete as
required.
2

Supply, installation, testing & commissioning

13.7 M.R. No.
of 24 port 10/1000 network switches etc complete as required. 3

13.8 M.R. Client Workstation

The workstion shall have the the following
specifications:- Processor Intel i5 with internal memory of 4 GB
RAM. Operating system Windows 7, 32 bit version. Video graphics
card 512 MB. Resolution support for cameras 2560 x 1600 display
resolution capable and directX true colour 32 bit. Dual Link VDI No.
outputs. Client software shall support Dual monitors each
displaying 16 cameras simultanously. A maximum of 32 cameras
viewing per workstion at a time programmable to sequence etc
complete as required. 1

13.9 M.R. Patch Panel

Supply, installation & testing of 24 Port Jack/ Patch panel etc
a) M.R. No.
complete as required. 3
Supply, installation & testing of CAT-6 Patch Cord 1 mtr etc
b) M.R. No.
complete as required. 32
Supply, installation & testing of CAT-6 Patch Cord 3 mtr etc
c) M.R. No.
complete as required. 3

13.10 M.R. 19 inch rack mount

19 inck rack mount console unit - 21 U with
a) M.R. 4 cooling fans on top and bottom at control room etc complete as Nos.
required. 1
19 inck rack mount console unit - 6 U with
b) M.R. 2 cooling fans on top and bottom at Fiel location etc complete as Nos.
required. 1
 Supplying and fixing of following cables along with accessories and
13.11 M.R.
making good the same as required.
Supply, laying & testing of Cat 5 / 6 UTP cable with all termination
a) M.R. Metre
crimpping etc complete as required. 1500
Supply, laying & testing of 3 x 1.5 sqmm
b) M.R. Power Cable for powering the cameras and Switches etc complete Metre
as required. 550

TOTAL SUB-HEAD-XIII

TOTAL ELECTRICAL WORKS