Tadipatri Engineering College, Tadipatri: Iii B.Tech Ii Sem I Mid-Term Examination Descriptive Branch: Civil

TADIPATRI ENGINEERING COLLEGE,TADIPATRI
III B.TECH II SEM I MID-TERM EXAMINATION

DESCRIPTIVE
BRANCH: CIVIL
SUB:T.E-I sub code:15A01604

TIME:90 minutes max marks:30
Answer any three of the following questions
1.a)Design of highway road development plan in Nagpur road?

b)Define highway alignment?
2.a)Explain classification of roads?
b)What are the factors affecting alignment?
3.a)Explain sight distance elements?
b)The radius of horizontal circular curve is 100m,the design speed
is 50km/h.The design coefficient of lateral friction is 0.15,then
i)calculate the superelevation required if the full lateral friction is
developed
ii)calculate the coefficient of friction needed , if no superelevation is
provided
iii)calculate the equilibrium superelevation in pressure on over inner
speed are same
4.calculate the extra widening required for a pavement of a width
7m horizontal curve of 250m length of the wheel base is 7m.Design
speed is 70km/h.compare the value obtain IRC recommendations.
b)Define transition curve ,and explain types of transition curves.
5.a)Define traffic signal and types of traffic signals.
b)Explain regulatory and prohibitory signs.
DESCRIPTIVE
BRANCH: CIVIL

1.a)Explain about the road network patterns briefly.
b)What is meant by engineering survey anf explain it briefly.
2.a)The radius of horizontal circular curve is 100m,the design speed

developed
provided
iii)calculate the equilibrium superelevation in pressure on over
inner speed are same
b)explain about the importance of geometric design
3.a)Explain about gradients
b)A valley curve is formed by a descending gradient of 1in40
which meets an ascending gradient of 1in30 ,\.Design the total
length of valley curve if the design speed is 100kmph. So as to fullfill
both comfort condition and head light sight distance for night driving
after calculating the SSD required.
4.a)Explain about the design controls and criteria.
b)Explain about the stopping sight distance.
5.Explain about the traffic signals and its types.
DESCRIPTIVE
BRANCH: CIVIL

2.a)Expalin about the road network patterns briefly.
3.a) calculate the extra widening required for a pavement of a width

b)what are the factors affecting alignment.
5.Find the length of valley curve required when a descending
gradient of 1 in 40 meets a ascending gradient of 1in 30 and the
design speed of the highway is 80kmph.The SSD is 120 m.
DESCRIPTIVE
BRANCH: CIVIL


developed
provided
BRANCH: CIVIL

BITS
1.Write atleat two highway development of India________________________________
2.Define camber________________
3.Draw width of pavement________________________
4.PIEV means______________________________
5.stopping sight distance formula_______________________
6.Draw the overtaking Zone__________________________
7.Define Valley curve___________________
8.Draw atleat two prohibitory signs____________
9.Draw Intersection with traffic signal_________________
10.write Webster method formula___________________
11.When length of parabolic curve > SSD ( )
(A)L = NS2/(√2H+√2h)2 (B)L = NS2/(√2H-√2h)2 (C)L = 2S2/(√2H+√2h)2
(D)L = 2S/(√2H+√2h)2
12.shift of transition curve_____________ ( )
(A) S = LS2/24 R (B) S = 2.7LS2/24 R (C) S = LS2/245 R (D) S = LS2/2.4 R
13.Mechanical widening and Psychology widening formula ( )
(A) nl2 ,2R (B) nl2 / 2R, V/9.5 √R (C) nl2 / 2R , V/6.5 √R (D) nl2 / 2R, V2/R
14. T= √(4S/a) is ( )
(A)True (B) False
15.WBM and Gravel Range for animal drawn vehicles ( )
(A)1in 33 to 1in 40 (B) 1in 25 to 1in 33 (C) 1in 25 to 1in 33 (D) 1in 50 to 1in 60
16.The signs which are used to warn the certain hazardous conditions are
called as
a)warning signs b)prohibitory signs c)danger signs d)accidental signs ( )
17.Draw the giveway and stop signs_________________________
18.Draw the transition curve________________________

19.for a mixed traffic condition neglecting the friction value as IRC then
equation is given by
a)e=0.75v/gR b)e=gr/0.75v c)e= (0.75v)/gR d)e=(0.75v) 2/gR ( )
20.Draw the symbols for men at work and cross road___________________

DESCRIPTIVE
BRANCH: CIVIL

1.a)Design of highway road development plan in Nagpur road?

b)Define highway alignment?
b)What are the factors affecting alignment?
3.a)Explain sight distance elements?
b)The radius of horizontal circular curve is 100m,the design speed
developed
provided
iii)calculate the equilibrium superelevation in pressure on over inner
speed are same
4.calculate the extra widening required for a pavement of a width
5.a)Define traffic signal and types of traffic signals.
b)Explain regulatory and prohibitory signs.

DESCRIPTIVE
BRANCH: CIVIL


developed
provided

DESCRIPTIVE
BRANCH: CIVIL

2.a)Expalin about the road network patterns briefly.
3.a) calculate the extra widening required for a pavement of a width

b)what are the factors affecting alignment.
5.Find the length of valley curve required when a descending
gradient of 1 in 40 meets a ascending gradient of 1in 30 and the
design speed of the highway is 80kmph.The SSD is 120 m.

DESCRIPTIVE
BRANCH: CIVIL


developed
provided

BRANCH: CIVIL

BITS
1.Write atleat two highway development of India________________________________
2.Define camber________________
3.Draw width of pavement________________________
4.PIEV means______________________________
5.stopping sight distance formula_______________________
6.Draw the overtaking Zone__________________________
7.Define Valley curve___________________

8.Draw atleat two prohibitory signs____________
9.Draw Intersection with traffic signal_________________
10.write Webster method formula___________________
11.When length of parabolic curve > SSD ( )
(A)L = NS2/(√2H+√2h)2 (B)L = NS2/(√2H-√2h)2 (C)L = 2S2/(√2H+√2h)2
(D)L = 2S/(√2H+√2h)2
12.shift of transition curve_____________ ( )
(A) S = LS2/24 R (B) S = 2.7LS2/24 R (C) S = LS2/245 R (D) S = LS2/2.4 R
13.Mechanical widening and Psychology widening formula ( )
(A) nl2 ,2R (B) nl2 / 2R, V/9.5 √R (C) nl2 / 2R , V/6.5 √R (D) nl2 / 2R, V2/R
14. T= √(4S/a) is ( )
(A)True (B) False
15.WBM and Gravel Range for animal drawn vehicles ( )
(A)1in 33 to 1in 40 (B) 1in 25 to 1in 33 (C) 1in 25 to 1in 33 (D) 1in 50 to 1in 60
16.The signs which are used to warn the certain hazardous conditions are
called as
a)warning signs b)prohibitory signs c)danger signs d)accidental signs ( )
17.Draw the giveway and stop signs_________________________
18.Draw the transition curve________________________

19.for a mixed traffic condition neglecting the friction value as IRC then
equation is given by
a)e=0.75v/gR b)e=gr/0.75v c)e= (0.75v)/gR d)e=(0.75v) 2/gR ( )
20.Draw the symbols for men at work and cross road___________________

Tadipatri Engineering College, Tadipatri: Iii B.Tech Ii Sem I Mid-Term Examination Descriptive Branch: Civil

Uploaded by

Copyright:

Available Formats

Tadipatri Engineering College, Tadipatri: Iii B.Tech Ii Sem I Mid-Term Examination Descriptive Branch: Civil

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tadipatri Engineering College, Tadipatri: Iii B.Tech Ii Sem I Mid-Term Examination Descriptive Branch: Civil

Uploaded by

Copyright:

Available Formats

TADIPATRI ENGINEERING COLLEGE,TADIPATRI

III B.TECH II SEM I MID-TERM EXAMINATION

SUB:T.E-I sub code:15A01604

1.a)Design of highway road development plan in Nagpur road?

SUB:T.E-I sub code:15A01604

1.a)Explain about the road network patterns briefly.

b)What is meant by engineering survey anf explain it briefly.

2.a)The radius of horizontal circular curve is 100m,the design speed

SUB:T.E-I sub code:15A01604

1.Explain about the traffic signals and its types.

2.a)Expalin about the road network patterns briefly.

b)Explain about the stopping sight distance.

3.a) calculate the extra widening required for a pavement of a width

SUB:T.E-I sub code:15A01604

1.a)Explain about the road network patterns briefly.

b)What is meant by engineering survey anf explain it briefly.

2.a)The radius of horizontal circular curve is 100m,the design speed

SUB:T.E-I sub code:15A01604

1.Write atleat two highway development of India________________________________

3.Draw width of pavement________________________

5.stopping sight distance formula_______________________

6.Draw the overtaking Zone__________________________

7.Define Valley curve___________________

8.Draw atleat two prohibitory signs____________

9.Draw Intersection with traffic signal_________________

10.write Webster method formula___________________

11.When length of parabolic curve > SSD ( )

(A)L = NS2/(√2H+√2h)2 (B)L = NS2/(√2H-√2h)2 (C)L = 2S2/(√2H+√2h)2

12.shift of transition curve_____________ ( )

(A) S = LS2/24 R (B) S = 2.7LS2/24 R (C) S = LS2/245 R (D) S = LS2/2.4 R

13.Mechanical widening and Psychology widening formula ( )

(A)True (B) False

15.WBM and Gravel Range for animal drawn vehicles ( )

18.Draw the transition curve________________________

20.Draw the symbols for men at work and cross road___________________