Data Sheet

Cisco ATA 190 Analog Telephone Adaptor

Product Overview
The Cisco® ATA 190 Analog Telephone Adaptor is a handset-to-Ethernet adaptor that turns traditional telephone
devices into IP devices (Figures 1 and 2). Customers can take advantage of the many new and exciting IP
telephony applications by connecting their analog devices to Cisco ATAs.

The Cisco ATA products are standards-based communication devices that deliver true, next-generation voice-over-
IP (VoIP) terminations to businesses and residences worldwide. The Cisco ATA 190:

● Protects existing telephone investment: The Cisco ATA 190 supports two voice ports (RJ-11 phone ports),
each with its own independent telephone number, and a single RJ-45 10/100 BASE-T Ethernet port. Each
port supports either voice calls or fax sessions, and both ports can be used simultaneously. This adaptor
can use existing Ethernet LAN deployments.
● Is cost-effective: The Cisco ATA 190 helps customers turn their analog phone devices into IP devices cost-
effectively and is the preferred solution to address the needs of customers who connect to enterprise
networks, small-office environments, or the emerging VoIP managed voice services and local services
market.
Enterprise customers can use the Cisco ATA 190 to connect analog phones and fax machines to their VoIP
network. Service providers are taking advantage of emerging telephony applications and the ease of deploying
second-line services using the Cisco ATA solutions.

Figure 1. Cisco ATA 190 Endpoint (Top View)

Figure 2. Cisco ATA 190 (Rear View)

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 4
 Features and Benefits
Table 1 lists the features and benefits of the Cisco ATA 190.

Table 1. Features and Benefits of Cisco ATA 190

Feature Benefits
Configuration and Provisioning ● Cisco Unified Communications Manager
● Configuration as per Cisco endpoints devices (UCM) standard configuration and provisioning
options
● Autoprovisioning with Trivial File Transfer Protocol (TFTP) for servers
● Ease of administration
● Automatic assignment of IP address, network routing IP, and subnet mask using Dynamic
Host Configuration Protocol (DHCP)
● Touch-tone telephone keypad configuration with voice prompt
● Administration password to protect configuration and access
● Remote upgrades through network

Voice Quality Clear, natural-sounding voice quality

● Advanced preprocessing to optimize full-duplex voice compression
● High-performance line-echo cancellation to eliminate noise and echo
● Voice activity detection (VAD) and comfort noise generation (CNG) to save bandwidth by
delivering voice, not silence; VAD is configurable, and the ATA 190 determines whether
CNG should be turned on dynamically
● Dynamic network monitoring to reduce jitter artifacts such as packet loss

Signaling Protocol Allows interoperation with Cisco UCM SIP solution

● Session Initiation Protocol (SIP) on the Cisco line side

Security Secure media and secure signaling support, for

● Secure Real-Time Transfer Protocol (SRTP) and Transport Layer Security (TLS) over SIP secure solutions

Fax Support Standard fax capability to send faxes over the IP

● T38 fax support network; the T.38 fax relay feature enables
devices to use fax machines to send files over the
IP network

Form Factor New form-factor design based on the Cisco

● Fits in most environments endpoints portfolio

Cisco UCM Version Compatibility

The Cisco ATA 190 is compatible with Cisco UCM Versions 8.5(1), 8.6(2), 9.1(2), 10.0(1) and later.

Product Specifications
Table 2 gives specifications of the Cisco ATA 190.

Table 2. ATA 190 Product Specifications

Physical Specifications
Power Power supply: Universal AC power supply 100 and 240V
DC input voltage: 5 VDC at 2.0A maximum power consumption: 5W
Noise level Less than 34 dBA at 3 ft (0.91m)
Connectors 2 RJ-11
Thermal 32 to 113°F (0 to 45°C)
-77 to 158°F (-25 to 70°C)
Humidity Operating humidity: 0 to 90% noncondensing
Storage humidity: 10 to 90% noncondensing
Mean time between failure 100,000 hours
(MTBF)

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 4
 Physical Specifications
Physical dimensions 3.98 x 3.98 x 1.10 in. (101 x 101 x 28 mm)
(H x W x D) and weight Unit weight: 5.40 oz (153g)
Compliance FCC (Part 15 Class B), CE, ICES-003, A-Tick certification, Restriction of Hazardous Substances (RoHS), and UL

Software Specifications
Configurable tones Configurable for two sets of frequencies and single set of on/off cadence
Dual-tone multi-frequency DTMF tone detection and generation
(DTMF)
Fax Fax pass-through and T.38 fax relay mode
Enhanced fax pass-through is supported on the Cisco ATA. Fax transmission rate is up to 14 kbps in T38 mode
and 34 kbps in fax pass-through mode. The rate is not configurable, and the Cisco ATA 190 autonegotiates and
chooses the maximum rate.
Line-echo cancellation ● Echo canceller for each port
● Double-talk detection

Out-of-band DTMF RFC 2833

Note: You cannot transmit RFC 2833 and in-band signaling simultaneously.
Configuration ● DHCP (RFC 2131)
● Web configuration through built-in web server
● Touch-tone phone keypad configuration with voice prompt
● Basic boot configuration (RFC 1350 TFTP Profiling) by touch-tone phone keypad or built-in web server
● Dial-plan configuration through Cisco UCM
● Cisco Discovery Protocol through Cisco UCM

Quality of service (QoS) ● Class-of-service (CoS) bit-tagging (802.1P)

● Type-of-service (ToS) bit-tagging

Security Encrypted TFTP configuration files

Voice coders-decoders ● G.729A and G.729AB
(codecs) ● G.711 a-law
● G.711 mu-law

Voice features ● VAD

● CNG
● Dynamic jitter buffer (adaptive)

VoIP protocols SIP

Warranty Information
Find warranty information on Cisco.com at the Product Warranties page.

Ordering Information
To place an order, visit the Cisco Ordering homepage and refer to Table 3. To download software, visit the Cisco
Software Center.

Table 3. Ordering Information

Product Name Part Number

Cisco ATA 190 ATA190

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 4
 Cisco Services
Cisco Services integrates closely with consumer marketing teams as an essential element of any technology
solution. Please contact your Cisco Services marketing communications manager if you have not already received
targeted services content blocks for integration. Please send an email message to ca-marcom@cisco.com if you
are not sure of the appropriate contact.

Cisco Services makes networks, applications, and the people who use them work better together.

Today, the network is a strategic platform in a world that demands better integration between people, information,
and ideas. The network works better when services, together with products, create solutions aligned with business
needs and opportunities.

The unique Cisco Lifecycle approach to services defines the requisite activities at each phase of the network
lifecycle to help ensure service excellence. With a collaborative delivery methodology that joins the forces of Cisco,
our skilled network of partners, and our customers, we achieve the best results.

For More Information

For more information about the Cisco ATA 190, contact your local Cisco account representative.

Printed in USA C78-731473-00 04/14

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 4