Surety Bonds In Plain English

(Construction)

- executor 2019.11.12 Page 1 of 11

Contents
SOME SURETY BOND BASICS .............................................................................................................. 3
Definitions .......................................................................................................................................... 3
Surety Bond Definition Explained....................................................................................................... 4
So, how do surety bonds work? ......................................................................................................... 4
TYPES OF SURETY BONDS ....................................................................................................................... 4
BID BONDS .......................................................................................................................................... 4
PERFORMANCE BONDS ...................................................................................................................... 4
PAYMENT BONDS ............................................................................................................................... 5
SURETY BOND REQUIREMENTS ON FEDERAL PROJECTS........................................................................ 5
MILLER ACT AND FAR REQUIREMENTS .............................................................................................. 5
PERFORMANCE BONDS ...................................................................................................................... 6
PAYMENT BONDS ............................................................................................................................... 6
REQUIREMENTS FOR QUALIFIED SURETIES ........................................................................................ 6
TREASURY LIST OF APPROVED CORPORATE SURETIES....................................................................... 7
SURETY BOND REQUIREMENTS ON STATE PROJECTS- LITTLE MILLER ACTS ...................................... 7
SURETY BOND REQUIREMENTS IN PRIVATE CONSTRUCTION PROJECTS ........................................... 8
WHAT BONDS SHOULD BE REQUIRED? .................................................................................................. 8
WHAT SURETY COMPANIES ARE ACCEPTABLE TO THE OWNER? ...................................................... 8
WHO PAYS THE BOND PREMIUM? ..................................................................................................... 8
SPECIFYING THE AMOUNT OF BONDS................................................................................................ 8
SURETY BOND PROVISIONS OF STANDARD FORM CONTRACTS ............................................................ 8
CONCLUSION ........................................................................................................................................ 10
GLOSSARY OF TERMS ........................................................................................................................... 10

- executor 2019.11.12 Page 2 of 11

This article is an abridged version of Federal Publications February 1996 CONSTRUCTION BRIEFINGS
entitled Surety Bond Basics, copyright 1996 by Federal Publications, Incorporated, written by Messrs.

Donohue and Thomas. A complimentary copy of the CONSTRUCTION BRIEFINGS may be obtained by
contacting our firm. Subscriptions to CONSTRUCTION BRIEFINGS are available from
Federal Publications, Incorporated, 1120 20th Street, N.W., Washington, D.C. 20036. You
may call Federal Publications at (202) 337-7000 or (800) 922-4330.

Most construction contractors are familiar with the process of obtaining surety bonds, but they may not
be aware of the legal relationships bonds establish the relationships among the principal (the
contractor), the obligee (usually the owner) and the surety. Contractors lawyers, on the other hand, are
aware of the rights and the obligations of the principal, obligee, and surety, but they may lack practical
knowledge about the process of obtaining bonds. This article is directed to both contractors and their
lawyers.

It explains in plain English just when construction surety bonds are required on federal, state, and
private projects, and the bonding requirements contained in widely used contract forms, including
federal government contracts, AIA contract forms, and the AGC subcontract form.

SOME SURETY BOND BASICS

A surety bond is not an insurance policy. A surety bond is a guarantee, in which the surety guarantees
that the contractor, called the principal in the bond, will perform the obligation stated in the bond. For
example, the obligation stated in a bid bond is that the principal will honor its bid; the obligation in a
performance bond is that the principal will complete the project; and the obligation in a payment bond
is that the principal will properly pay subcontractors and suppliers. Bonds frequently state, as a
condition, that if the principal fully performs the stated obligation, then the bond is void; otherwise the
bond remains in full force and effect.
If the principal fails to perform the obligation stated in the bond, both the principal and the surety are
liable on the bond, and their liability is joint and several. That is, either the principal or surety or both
may be sued on the bond, and the entire liability may be collected from either the prin
cipal or the surety.

The amount in which a bond is issued is the penal sum, or the penalty amount, of the bond. Except in a
very limited set of circumstances, the penal sum or penalty amount is the upward limit of liability on the
bond.

The person or firm to whom the principal and surety owe their obligation is called the obligee. On bid
bonds, performance bonds, and payment bonds, the obligee is usually the owner. Where a
subcontractor furnishes a bond, however, the obligee may be the owner or the general contractor or
both. The people or firms who are entitled to sue on a bond, sometimes called beneficiaries of the bon
d, are usually defined in the language of the bond or in those state and federal statutes that require
bonds on public projects.

Definitions
Q: Who's involved in surety bonds?
A: Each surety bond that's issued acts as a three-party contract.
 The principal purchases the bond to guarantee the quality of work to be done in the future. This
is usually a business owner or other professional.
- executor 2019.11.12 Page 3 of 11
  The obligee requires the principal to purchase a bond to avoid potential financial loss. This is
usually a government agency.
 The surety issues the bond and financially guarantees the principal's capacity to perform a
specific task. These are surety bond companies like SuretyBonds.com.

Surety Bond Definition Explained

sur•e•ty bond
A surety bond is defined as a three-party agreement that legally binds together a principal who needs
the bond, an obligee who requires the bond and a surety company that sells the bond. The bond
guarantees the principal will act in accordance with certain laws. If the principal fails to perform in this
manner, the bond will cover resulting damages or losses.

Although they often go unnoticed, surety bonds play a major role in countless industries across America.
If you’re reading this article, you’ve probably heard about surety bonds but are still confused about their
exact purpose. You’re not alone. Even those required by law to be bonded frequently misunderstand
surety bonds.

So, how do surety bonds work?

Surety bonds provide financial guarantees that contracts and other business deals will be completed
according to mutual terms. Surety bonds protect consumers and government entities from fraud and
malpractice. When a principal breaks a bond's terms, the harmed party can make a claim on the bond to
recover losses.

https://www.suretybonds.com/surety-bond-definition.html

TYPES OF SURETY BONDS

BID BONDS
A bid bond guarantees the owner that the principal will honor its bid and will sign all contract
documents if awarded the contract. The owner is the obligee and may sue the principal and the
surety to enforce the bond. If the principal refuses to honor its bid, the principal and surety are liable on
the bond for any additional costs the owner incurs in reletting the contract. This usually is the
difference in dollar amount between the low bid and the second low bid. The penal sum of a bid bond
often is ten to twenty percent of the bid amount.

PERFORMANCE BONDS
A performance bond guarantees the owner that the principal will complete the contract according to its
terms including price and time. The owner is the obligee of a performance bond, and may sue the
principal and the surety on the bond. If the principal defaults, or is terminated for default by the owner,
the owner may call upon the surety to complete the contract. Many performance bonds give the surety
three choices:
1. completing the contract itself through a completion contractor (taking up the contract);
2. selecting a new contractor to contract directly with the owner; or
3. allowing the owner to complete the work with the surety paying the costs.

- executor 2019.11.12 Page 4 of 11

The penal sum of the performance bond usually is the amount of the prime construction contract, and
often is increased when change orders are issued. The penal sum in the bond usually is the
upward limit of liability on a performance bond. However, if the surety chooses to complete the work
itself through a completing contractor to take up the contract then the penal sum in the bond may not
be the limit of its liability. The surety may take the same risk as a contractor in performing the contract.

PAYMENT BONDS
A payment bond guarantees the owner that subcontractors and suppliers will be paid the monies that
they are due from the principal. The owner is the obligee; the beneficiaries of the bond are the
subcontractors and suppliers. Both the obligee and the beneficiaries may sue on the bond. An owner
benefits indirectly from a payment bond in that the subcontractors and suppliers are assured of
payment and will continue performance. On a private project, the owner may also benefit by providing
subcontractors and suppliers a substitute to mechanics liens. If the principal fails to pay the
subcontractors or suppliers, they may collect from the principal or surety under the payment bond, up
to the penal sum of the bond. Payments under the bond will deplete the penal sum. The penal sum in a
payment bond is often less than the total amount of the prime contract, and is intended to cover
anticipated subcontractor and supplier costs.

. JW Surety Bonds offers performance bonds for small to large contractors throug
hout the country.
Get a free quote using our online applications.
. Bryant Surety Bonds provides free quotes for performance bonds based on person
al credit for small contractors and competitive for medium to large contractors.

SURETY BOND REQUIREMENTS ON FEDERAL PROJECTS

MILLER ACT AND FAR REQUIREMENTS

The Miller Act, 40 U.S.C. §§ 270a-270f, provides that all federal construction contracts performed in the
United States must require the contractor to furnish a performance bond in an amount satisfactory to
the contracting officer; a payment bond in a penal sum of up to $2.5 million, and other surety bonds as
well. In the Federal Acquisition Streamlining Act of 1994, Congress made the Miller Act inapplicable to
contracts under $100,000, and directed agencies to develop alternatives to surety bonds for contracts
between $25,000 and $100,000. These statutory requirements are implemented in FAR part 2
8, bonds and insurance. You can get a good introduction to the language and purposes of surety bonds
simply by reading FAR part 28.

BID BONDS
A bid guarantee is required on federal projects whenever a performance bond and/or a payment bond is
mandated. Bid guarantees usually are in the form of bid bonds, but on federal projects they may also be
submitted as a postal money order, certified check, cashier s check or an irrevocable letter of credit. A
bid guarantee must be in an amount equal to at least twenty percent of the bid price ; the maximum
amount is $3 million. The standard solicitation provision requiring bid guarantees says that if the
contractor awarded the contract fails or refuses to execute all contractually required documents, the
- executor 2019.11.12 Page 5 of 11
agency may terminate the contract for default. In such a case, the agency will make a demand on the bid
bond or bid guarantee to offset the difference in price between that bid and the next lowest bid. Bid
bonds and bid guarantees are returned to unsuccessful bidders after bids are opened; bid guarantees
are retur
ned to the successful
bidder after all contractually required documents and bonds are executed.

PERFORMANCE BONDS
As amended by the FASA, the Miller Act requires payment bonds and performance bonds for all federal
contracts over $100,000. The penal amount of the performance bond is generally one hundred percent
of the contract amount, and the penal sum is generally increased for each change order. The surety is
entitled to receive information from the contracting officer concerning the progress of the work,
payments, and estimated percentages of completion whenever it so requests in writing. The form
of the Miller Act performance bond is set out at FAR 53.301-25.

PAYMENT BONDS
Payment bonds are now required for all federal construction contracts over $100,000. The penal
amount of the payment bond is required to be a maximum of $2.5 million where the contract
price is more than $5 million; for contracts less than $5 million, the penal sum of the payment bond i
s to be forty to fifty percent of the contract price. Each solicitation must state that a payment bond and
performance bond are required, the penal amount required for the bonds, and the deadline by which
bonds must be submitted after contract award. The form for a Miller Act payment bond is at FAR
53.301-25-A. The bond form does not set out any time limitations for claims against the bond. However,
the Miller Act provides that suits against a payment bond must be brought within one year after the
date on which the last of the lab or was performed or material was supplied. In addition, the Miller Act
requires that second-tier subcontractors and others who do not have a direct contract with the prime
contractor submit a written notice of their claim to the prime contractor with ninety days of the last
date of their work on the project.

REQUIREMENTS FOR QUALIFIED SURETIES

Federal surety bond requirements may be met in three ways: surety bonds issued by an approved
corporate surety; surety bonds issued by an individual surety who pledges certain defined types of
assets; or by the contractor pledging assets directly. The third option is uncommon.

REQUIREMENTS FOR INDIVIDUAL SURETIES

Individuals may act as sureties to satisfy bonding requirements on federal projects if they have certain
acceptable assets in the required amounts to support the bonds. Although federal agencies probably
would prefer to deal only with approved corporate sureties, allowance for individual sureties may
enhance competition by allowing awards to contractors that might not otherwise qualify to obtain
bonds from an approved corporate surety.

To support bonds issued by individual sureties, agencies may only accept cash, readily marketable
assets, or irrevocable letters of credit from a federally insured financial institution.

Acceptable assets include cash, certificates of deposit or other cash equivalents; U.S. agency securities
(value d at current market value); stocks and bonds traded on the New York, American and certain other
exchanges, valued at ninety percent of their current 52-week low price; real property owned outright in
fee simple, valued at one hundred percent of its current tax assessment value; and irrevocable letters of
credit issued by federally insured financial institutions. Examples of unacceptable assets are also listed in

- executor 2019.11.12 Page 6 of 11

the regulations. Unacceptable assets are those that may be difficult to liquidate (e.g., a life estate in real
property); are of uncertain or greatly fluctuating value (e.g., jewelry); property commonly exempt from
attachment under state laws (e.g.,the individual surety s home); or commonly pledged to others (e.g.,
plant and equipment). An individual surety is required to submit an affidavit, in which the surety
identifies the assets, the market value of the assets, and all encumbrances on the assets. The affidavit
must also identify all other bonds issued by the individual surety within the last three years.

TREASURY LIST OF APPROVED CORPORATE SURETIES

By far the most common means of satisfying federal bonding requirements is by a bond issued by a
corporate surety. The Department of the Treasury maintains a list of corporate sureties approved to
issue bonds for federal projects, Treasury Department Circular 570. Copies may be obtained from the
agency.

The circular also is posted in the Treasury s computerized bulletin board at (202) 874-6817, and on
Treasury s Web site at http://www.ustreas.gov/.

Whenever a new corporate surety is added to the approved list, a notice is published in the Federal
Register. Contracting officers are prohibited from accepting surety bonds issued by corporate sureties
not listed in Treasury Circular 570. The circular lists the name and address of each approved surety and
all states where each surety is licensed.

When approving corporate sureties, Treasury makes a determination as to the financial strength of the
surety, and sets an underwriting limit, commonly called a bonding limit. The bonding limit is also stated
in Circular 570. When an approved surety offers a bond on a federal project, the contracting officer
checks to make sure that the surety has not exceeded the surety s bonding limit. Because of these
underwriting limits, surety bonds on very large construction projects, valued in the hundreds
of millions of dollars, frequently are issued by several different approved surety companies, acting as
co-sureties. The name of each co-surety will appear on the bond, along with its individual limit of
liability.

Another way surety companies can stay within their approved surety underwriting limit, and spread
their risk, is to obtain coinsurance or reinsurance, in which they essentially obtain a contract from
another surety company to cover part of their risk on the bond they have issued. When a surety
obtains reinsurance for part of its risk under a Miller Act bond, it must submit to the contracting officer a
reinsurance agreement for a Miller Act performance bond and a reinsurance agreement for a Miller Act
payment bond. The terms of both reinsurance agreements are stipulated in the regulations.

SURETY BOND REQUIREMENTS ON STATE PROJECTS- LITTLE MILLER ACTS

Statutes in all fifty states and the District of Columbia require performance and payment bonds for state
government construction contracts. These state statutes often are called Little Miller Acts because many
of them are modeled after the federal Miller Act. Useful information is available from the National
Association of Surety Bond Producers. A good discussion of these Little Miller Acts is in Federal
Publication s CONSTRUCTION BRIEFING, Little Miller Acts. A fairly recent summary listing of these state
statutes, along with citations, is in Bednar, et al., CONSTRUCTION CONTRACTING, George Washington
University (1991), at 1309a-1309r. We will not duplicate these discussions. Each state licenses sureties
to issue bonds. The Little Miller Acts each require bonds by licensed sureties. You can identify sureties
licensed in particular states by checking Circular 570 on the computer bulletin board and at Treasury s
World Wide Web site.

- executor 2019.11.12 Page 7 of 11

SURETY BOND REQUIREMENTS IN PRIVATE CONSTRUCTION PROJECTS
There obviously is a great variation among private construction owners and projects throughout the
United States. Performance bonds and payment bonds are required by owners for most large
construction projects. If the owner elects to require surety bonds, major issues for the owner to decide
during project planning are:

WHAT BONDS SHOULD BE REQUIRED?

Performance bonds protect the owner from contractor default and delays, and these are important for
commercial properties with fixed tenant availability dates. Payment bonds protect the property from
mechanics liens, which might otherwise interfere with sale or refinancing of the property. Bid bonds,
which generally address only the price-spread between the low and next to lowest bid price, serve a
much narrower purpose. However, because of the expectations and requirements of the bid package,
corporate sureties generally will issue bid bonds only to contractors who qualify for performance and
payments bonds. Thus a requirement for a bid bond may help narrow the field of bidders to
only those firms who can actually satisfy performance and payment bond requirements.

WHAT SURETY COMPANIES ARE ACCEPTABLE TO THE OWNER?

Since a surety bond essentially is a guarantee by the surety, the owner has an interest in deciding which
sureties are acceptable. One means of identifying responsible sureties is to refer to the list of sureties
approved in Circular 570.

WHO PAYS THE BOND PREMIUM?

Of course, the owner eventually pays all costs anticipated in the contractors bid, whether the project is
fixed-price or is a cost-plus-fee arrangement. A private owner may want to provide separate
reimbursement for the contractors bond premium cost when the bond is delivered to the owner. This
procedure ensures that bonds actually are furnished.

SPECIFYING THE AMOUNT OF BONDS.

Premiums rise along with the penal sum of the bond, and the owner ultimately pays these costs in the
contract price. Nonetheless, the owner has an interest in setting the bond penal sum high enough to
provide the desired protection to the project. A fairly good guideline for setting penal sums is the FAR
requirement discussed hereinabove. The penal sum for the performance bond should be one hundred
percent of the original contract price, and the penal sum should be increased for each change order. The
payment bond should be fifty percent of the contract price up to some fairly large maximum penal sum.

SURETY BOND PROVISIONS OF STANDARD FORM CONTRACTS

- executor 2019.11.12 Page 8 of 11

Popular form contracts for private construction projects, those published by the American Institute of
Architects (AIA) and the Associated General Contractors of America (AGC), leave bonding requirements
to the choice of the parties. Thus these forms do not provide much guidance in deciding the issues we
have identified. The current AIA General Conditions merely provide that the owner may require bonds
elsewhere in the contract documents and that the contractor must furnish copies of the bonds upon
request to any bond beneficiary (e.g., subcontractors or suppliers). AIA Document A-201 also provides
that compensation for construction change directives ordered by the owner shall include bond
premiums for the extra work.

AIA s current owner-contractor agreement, AIA Document A-101, does not address surety bonds at all.
AIA s contractor-subcontractor agreement, AIA Document A-401, addresses bonding requirements in
article 7 by leaving a blank area for the parties to add any bonding requirements.

The current AGC Standard Form for Construction Subcontract, also endorsed by the American
Subcontractors Association and the Associated Specialty Contractors, addresses surety bonds in article
5. Paragraph 5.1 provides that copies of the contractor s payment and performance bonds must be
furnished to a subcontractor on request. Paragraph 5.2, Subcontractor Bonds, provides that if bonds are
required from the subcontractor, the subcontractor shall be reimbursed for surety bond premiums in
the first progress payment. Performance and payment bonds must be in the full amount of the
subcontract price, unless otherwise stated.

PROVISIONS OF STANDARD AIA BOND FORMS

Private construction contracts rarely require particular bond language. Rather, they usually require
bonds in a specified amount with a surety acceptable to the owner, general contractor or
other obligee. The AIAs bond forms, AIA Documents A-311 and A-312, are popular and instructive; thus
their provisions merit abrief discussion.

AIA s performance bond form, AIA Document 311, provides that the surety waives not ice of change
orders and extensions of time. It says that the owner is the only person who can sue to enforce the
performance bond, and that any such suit must be brought within two years from the date final
payment is due under the contract. It also provides, if the owner declares the contractor in default, that
the surety shall either complete the contract or, if the owner elects, shall obtain bids so that the owner
may contract directly with a completion contractor with the surety providing funds sufficient for
completion.

AIA s labor and material payment bond form, AIA Document A-311, is very similar to the Miller Act
payment bond required for federal projects. It defines a claimant as a person or firm that has a direct
contract with either the principal or a subcontractor to the principal. Thus in the typical case where the
principal is the general contractor, claimants under AIA payment bonds are limited to subcontract
ors and suppliers who furnish labor and materials directly to the general contractor or directly to a
subcontractor. Claimants are entitled to sue on the bond if they have not been paid within ninety days
after the last day of their work on the contract. Claimants that do not have a direct contract with the
principal (e.g., second-tier subcontractors) must give a written notice to the owner and the surety within
ninety days of the last day of their work advising that the claimant has not been paid. Suits on the
payment bond must be brought within one year of the principals last day of work on the project. (This is
different from bonds under the Miller Act, which requires that suits be filed within one year of the
claimant s last day of work on the project.) Suits must be filed in a state or federal court for the county
in which the project was located.

- executor 2019.11.12 Page 9 of 11

AIA s combination performance bond and payment bond, AIA Document A-312, is similar to the
separate bonds described above, but this one adds some additional provisions. The performance bond
contains
requirements that the owner give the surety written notice before declaring the
contractor in default, and
provides for a meeting of the parties within fifteen days of that notice to disc
uss performance. The
performance bond also gives the surety the option of having its principal comple
te the project,
notwithstanding the default, if the owner consents. This probably would be done
with financing or other
assistance contributed by the surety. The payment bond in AIA Document A-312 requires that claimants
that do not have a direct contract with the principal take action in set time frames. Such a claimant
must give written notice to the principal that it has not been paid; wait thirty days for the principals
response, and then notify the surety in writing that it intends to make a claim on the bond. It also
requires the surety, within forty-five days of such notice, to pay all undisputed amounts and to respond
regarding any disputed amounts.

CONCLUSION

If the terminology of construction surety bonds is confusing at first, you may want to keep this guide as
a reference. Surety bonds are required for most large construction projects in the United States and
now more frequently they are required in other countries. Our next article will review the process of
obtaining surety bonds, the choices contractors have among surety companies, and the agreements
typically entered into between contractors and sureties when construction surety bonds are issued.

GLOSSARY OF TERMS
BENEFICIARY:
A person who is entitled by law or bond language to claim against a bond even though not specifically
named as an Obliges.

BID BOND:
An obligation undertaken by a bidder promising that the bidder will, if awarded the contract within the
time stipulated, enter into the contract and furnish the prescribed performance and payment bond's).

BOND:
An obligation undertaken by a third party promising to pay if a contractor does not fulfill its valid
obligations under a contract. Some bonds may also promise that the Surety will perform if the
contractor fails to.

INDEMNITY BOND:
A bond which promises to reimburse an Obliges for loss incurred when a Principal fails to perform its
contract or (in some cases) fails to pay for material, services or labor used in prosecution of the contract.

MECHANIC S OR SUPPLIER S LIEN:

- executor 2019.11.12 Page 10 of 11

A right given by statue to certain persons - typically suppliers, laborers, architects, etc. - who perform
services improving real property. If they are unpaid, they may file a claim against the property and force
the owner to pay even if the owner has already paid a prime contractor for their goods or service.

OBLIGES:
The named person to whom, under a bond, the promises of the Principal and the Surety run. For a prime
contract performance bond, the Obliges is usually the owner.

LICENSE BOND:
A bond required of all licensed contractors in certain states for the benefit of specific persons
designated by statue. Some of these states allow a cash deposit with the state in lieu of a bond.

PAYMENT BOND:
A bond which promises to pay some or all of the persons who provide materials, labor, or services for
prosecution of a contract.

PERFORMANCE BOND:
A bond which promises that the terms of a contract, or some of them, will be performed by the
Principal.

PENAL SUM:
The limit of the Surety s liability under its bond. The amount may be fixed by statue (for license and
permit bonds), by the initial contract amount (for performance/payment bonds), or by some other
means.

PRINCIPAL:
The bonded contractor, who has the primary responsibility for completing the obligations of a contract.

SURETY:
The third party (usually an insurance company) who promises to pay if the Principal fails to fulfill its
obligation under a contract.

- executor 2019.11.12 Page 11 of 11