Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 68 views

    Rolled - Moment

    Uploaded by

    Adekimi Emmanuel
    This document summarizes the design of a base plate (I-type) including loads, parameters, and calculations to determine the base pressure and check the strength of various components. Key loads include 14442 daN axial compression and 15236 daN-m moment. The length of the compression zone is calculated as 253.125 mm. The maximum base pressure is 65.45 daN/cm2 and maximum bolt tension is 9345 daN. Checks are performed to ensure the base plate thickness and strength of concrete, flange, and base plate are sufficient.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Rolled - Moment

    Uploaded by

    Adekimi Emmanuel
    68 views5 pages
    This document summarizes the design of a base plate (I-type) including loads, parameters, and calculations to determine the base pressure and check the strength of various components. Key loads include 14442 daN axial compression and 15236 daN-m moment. The length of the compression zone is calculated as 253.125 mm. The maximum base pressure is 65.45 daN/cm2 and maximum bolt tension is 9345 daN. Checks are performed to ensure the base plate thickness and strength of concrete, flange, and base plate are sufficient.

    Original Description:

    rolled moment

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a base plate (I-type) including loads, parameters, and calculations to determine the base pressure and check the strength of various components. Key loads include 14442 daN axial compression and 15236 daN-m moment. The length of the compression zone is calculated as 253.125 mm. The maximum base pressure is 65.45 daN/cm2 and maximum bolt tension is 9345 daN. Checks are performed to ensure the base plate thickness and strength of concrete, flange, and base plate are sufficient.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    68 views5 pages

    Rolled - Moment

    Uploaded by

    Adekimi Emmanuel
    This document summarizes the design of a base plate (I-type) including loads, parameters, and calculations to determine the base pressure and check the strength of various components. Key loads include 14442 daN axial compression and 15236 daN-m moment. The length of the compression zone is calculated as 253.125 mm. The maximum base pressure is 65.45 daN/cm2 and maximum bolt tension is 9345 daN. Checks are performed to ensure the base plate thickness and strength of concrete, flange, and base plate are sufficient.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 5

    BASE PLATE ( I -TYPE ) Platine I - type

    DESIGN INPUTS : Donnees de calcul b = 0.725 m


    f = 10.53
    LOADS: CHARGES D = 329.5 mm

    Axial Compression in the column ( N ) = 14442 daN Load Case 36


    Axial Tension in the column ( T ) = 11315 daN Load Case 37
    Moment at the Base of the Column ( Mz ) = 15236 m-daN Load Case 50
    Shear at the Base of the Column ( Fx ) = 4651.45 daN Load Case 39
    Shear at the Base of the Column ( Fz ) = 3299.55 daN Load Case 50

    Parameters PARAMETRES

    Determination of Base Pressure :

    a) Calculation of length of compression zone (yo):


    490mm

    tf

    N
    M

    Ft yo

    dt Pm

    Where,

    yo = Length of the compression zone


    hp = Length of the Base Plate
    bp = Width of the Base Plate
    hc = Depth of column
    bc = Width of column flange
    tf = Thickness of column flange
    tw = Thickness of column web
    N = Axial compressive force in the column
    M = Moment at the bottom of the column
    At = Total sectional area of the anchor bolt
    dt = Distance between the centre of anchor bolt to the CG of the section
    n = Coefficient d' equivalence = Ea / Eb
    where Ea = Modulus of elasticity of Steel
    Eb = Modulus of elasticity of Concrete
    Inputs :

    hp = 750 mm
    bp = 400 mm
    hc = 490 mm
    bc = 300 mm
    tf = 23 mm
    tw = 12 mm
    N = 14442.108 daN
    M = 15236.175 m-daN
    Bolt (f) = 30 mm
    Cross Spacing (s) = 200 mm
    Cover = 75 mm
    At = 1122 mm2 ( 2 Nos of 30 dia Bolts on either side )
    n = 15 (Ea / Eb)
    a2 = 55 mm
    dt = 300 mm ( dt = a2 + hp/2)

    To find the position yo of the neutral axis, we use the graph 1 (see annexe)

    (dt+ M/N) = 2.01


    (dt+ hp/2)

    2 n At = 0.125
    bp (dt+hp/2)
    From the chart, the value of yo/(dt + hp/2) = 0.375

    Yo = 253.125 mm

    Base Pressure in the concrete : Pression sur beton

    pm = 2(M + N dt)
    bp yo (dt + (hp/2) - (yo/3))

    = 0.6545 daN/mm2

    pm = 65.45 daN/cm2

    Maximum Tension in one Bolt:

    Ft or Nj = M - N (hp/2 - yo/3)
    2*(dt + (hp/2) - (yo/3))

    Ft or Nj = 9345 daN

    Verification de la resistance du beton

    K.s bc = 2.126 > 0.6545 daN/mm2

    pm < K.s bc Hence Safe

    Average pressure on the concrete : Pression moyenne sur be'ton :

    p = 2*N = 2 x 14442.108 x 10 = 0.963 N / mm2


    bp hp 400 x 750
    s bc = 0.85 fc28 = 0.85 x 25 = 14.17 N / mm2
    1.5 1.5
    p = k s bc = 1.5 x 14.17 = 21.26 N / mm2 > 0.963 N / mm2

    Hence Ok

    Check for Flange in Tension

    Leff smaller of ( bc/2; pi*a2 ; (bc-s)/2 + (pi/2)*a2 ; (s/2)+ (pi/2)*a2 )

    smaller of ( 150 172.85714286 136.42857 186.429 )

    that is = 136.42857143

    Nj = 9345 daN < Leff x tf x s e = 136.428571428571 x 23 x 26.5


    = 43384.2857 daN

    Hence Ok

    Check for the Strength of Base plate

    Side in Tension

    M1 = 1027950 daN-mm (M1 = Nj (2 dt-hc )

    V1 = 18690 daN (V1 = 2*Nj)

    Side in Compression

    p1 0.3 daN/mm2 (p1= pm (yo-hp/2+hc/2) /yo)

    M2 1833086.7 daN-mm

    V2 25285.0 daN

    M3 327250.0 daN-mm

    The maximum moment = 1833086.7 daN-mm


    The maximum shear = 25285.0 daN

    tp > 32.21 mm tp > (6 M2 / bp / sigma ep) 0.5

    tp > 6.99 mm tp > (2.6 * V2 / bp / sigma ep)

    Check for Rigidity of the Base plate


    A Horizontal Vertical Horizontal Moment Moment G H
    Node Env Fx DN Fy DN Fz DN Mx kg-m My kg-m Mz kg-m Mz kg-m
    1 +ve 4645.433 11102.016 3299.547 15236.18 6.384 0
    242 1.33*G39 1.33*G 50 1.33*G 50 1.33*G 32 1.33*G -
    1 -ve -4651.447 -7737.287 -3299.547 -15236.18 -6.384 0
    39 1.33*G 42 1.33*G 47 1.33*G 47 1.33*G 31 1.33*G -
    4 +ve 388.279 14442.11 2483.357 10243.52 0 0
    36 1.33*G 36 1.33*G 50 1.33*G 50 1.33*G - -
    4 -ve -382.265 -11315.41 -2483.357 -10243.52 0 0
    237 1.33*G37 1.33*G 47 1.33*G 47 1.33*G - -

    A Horizontal Vertical Horizontal Moment Moment G H


    Node Env Fx DN Fy DN Fz DN Mx kg-m My kg-m Mz kg-m Mz kg-m
    1 +ve 3432.279 8228.529 2454.173 11364.13 4.424 0
    449 1.0*G 440 1.0*G 445 1.0*G 445 1.0*G 431 1.0*G -
    1 -ve -3436.801 -5698.658 -2454.173 -11364.13 -4.424 0
    440 1.0*G 441 1.0*G 444 1.0*G 444 1.0*G 430 1.0*G -
    4 +ve 284.451 10739.88 1842.027 7619.967 0 0
    426 1.0*G 426 1.0*G 445 1.0*G 445 1.0*G - -
    4 -ve -279.929 -8388.977 -1842.027 -7619.967 0 0
    435 1.0*G 427 1.0*G 444 1.0*G 444 1.0*G - -
    BASE PLATE

    DESIGN INPUTS : Donnees de calcul

    LOADS: CHARGES

    Axial Compression in the column ( N ) = 14442 daN Load Case 36


    Axial Tension in the column ( T ) = 11315 daN Load Case 37
    Moment at the Base of the Column ( Mz ) = 10244 m-daN Load Case 36
    Shear at the Base of the Column ( Fx ) = 4651.4 daN Load Case 39
    Shear at the Base of the Column ( Fz ) = 3299.5 daN Load Case 50

    Parameters PARAMETRES

    Determination of Base Pressure :

    a) Calculation of length of compression zone (yo):


    490mm

    tf
    N
    M

    Ft yo

    dt Pm

    Where,

    yo = Length of the compression zone


    hp = Length of the Base Plate
    bp = Width of the Base Plate
    hc = Depth of column
    bc = Width of column flange
    tf = Thickness of column flange
    tw = Thickness of column web
    N = Axial compressive force in the column
    M = Moment at the bottom of the column
    At = Total sectional area of the anchor bolt
    dt = Distance between the centre of anchor bolt to the CG of the section
    n = Coefficient d' equivalence = Ea / Eb
    where Ea = Modulus of elasticity of Steel
    Eb = Modulus of elasticity of Concrete
    Inputs :

    hp = 750 mm
    bp = 400 mm
    hc = 490 mm
    bc = 300 mm
    tf = 23 mm
    tw = 12 mm
    N = 14442.108 daN
    M = 10243.517 m-daN
    Bolt (f) = 30 mm
    Cross Spacing (s) = 200 mm
    Cover = 75 mm
    At = 1122 mm2 ( 2 Nos of 30 dia Bolts on either side )
    n = 15 (Ea / Eb)
    a2 = 55 mm
    dt = 300 mm ( dt = a2 + hp/2)

    To find the position yo of the neutral axis, we use the graph 1 (see annexe)

    (dt+ M/N) = 1.50


    (dt+ hp/2)

    2 n At = 0.125
    bp (dt+hp/2)
    From the chart, the value of yo/(dt + hp/2) = 0.42

    Yo = 283.5 mm

    Base Pressure in the concrete : Pression sur beton

    pm = 2(M + N dt)
    bp yo (dt + (hp/2) - (yo/3))

    = 0.4429 daN/mm2

    pm = 44.29 daN/cm2

    Maximum Tension in the Bolt:

    Ft or Nj = M - N (hp/2 - yo/3)
    2*(dt + (hp/2) - (yo/3))

    Ft or Nj = 5334 daN

    Design of Anchor Bolts : Calcul des boulons d'ancrage :

    Diameter of the anchor bolt = 30 mm


    Maximum tension in one bolt = 5334 daN
    Area of the bolt used = 561 mm2
    Allowable stress in the bolts = 26.5 daN/mm2
    Allowable force in the bolt = 11893 daN > 5334 daN

    Hence ok

    Average pressure on the concrete : Pression moyenne sur be'ton :

    p = 2*N = 2 x 14442.108 x 10 = 0.963 N / mm2


    bp hp 400 x 750
    s bc = 0.85 fc28 = 0.85 x 25 = 14.17 N / mm2
    1.5 1.5
    p = k s bc = 1.5 x 14.17 = 21.26 N / mm2 > 0.963 N / mm2

    Hence Ok

    Check for Flange in Tension

    Leff smaller of ( bc/2; pi*a2 ; (bc-s)/2 + (pi/2)*a2 ; (s/2)+ (pi/2)*a2 )

    smaller of ( 150 172.86 136.43 186.43 )

    that is = 136.43

    Nj = 5334 daN < Leff x tf x s e = 136.43 x 12 x 26.5


    = 43384.7 daN

    Hence Ok

    Check for the Strength of Base plate

    1 2 3
    l3
    H

    H' s
    2
    1

    Size of the Stiffener

    Assume the thickness of base plate tp = 25 mm

    Thickness of Stiffner e = 10 mm

    You might also like