TECHNICAL SPECIFICATION

Sandv
Sandv ik LH410
LH410 LH410-18 (16.09.2011)
1/3

Sandvik Mining and Construction reserves the right to change this ISO 9001 ISO 14001 Sandvik Mining and Construction Oy
specification without further notice P.O. Box 434
20101 Turku, Finland
Tel. +358 205 44 131
Fax +358 205 44 130
www.smc.sandvik.com
CERTIFICATED CERTIFICATED
FIRM FIRM
 TECHNICAL SPECIFICATION
Sandv ik LH410 LH410-18 (16.09.2011)
2/3

Main dim ensions Standard axles

Total length 9 591 mm (378") Front axle Kessler D102
Width without bucket 2 496 mm (98") Posi-Stop brakes, limited Slip differential,
Maximum width 2 647 mm (104") fixed
Std. height with safety canopy or cabin 2 385 mm (94") Rear axle Kessler D102
Weights Posi-Stop brakes, limited slip differential,
Operating weight 26 200 kg (57 760 lb) oscillating ± 8°. (oscillation with roller
Total loaded weight 36 200 kg (79 800 lb) bearings)
Shipping weight 26 000 kg (57 320 lb) Standard tyres
 Axle weights without load: Size and type 18.00x25 L5S, 28 ply
front axle 11 700 kg (25 800 lb) Brand and type subject to availability
rear axle 14 500 kg (31 970 lb) In certain applications the productive capabilities of the
 Axle weights with load: loader may exceed the TKPH value given by the tyre
front axle 27 050 kg (59 600 lb) manufacturer. Sandvik Mining and Construction
rear axle 9 150 kg (20 200 lb) recommends that the user consult with their tyre supplier to
Unit weight is dependent on the selected options evaluate specific conditions to secure the correct technical
Capacities solution.
Tramming capacity 10 000 kg (22 000 lb) Standard Canopy
Breakout force, lift 184 kN (18 800 kg) (41 400 lb) ROPS / FOPS certified canopy.
Breakout force, tilt 163 kN (16 600 kg) (36 600 lb) Height 2385 mm (94”)
Tipping load 23 400 kg (51 600 lb)
3 3 Steering hydraulics
Bucket std. 4,0 m  (5.2 yd ), GET -abrasion
Hydraulically operated, centre-point articulation, power
system
steering with two double acting cylinders. Steering controlled
Bucket motion times by electric joystick. Interlock protection. Emergency steering
Raising time 7,5 sec. is optional.
Lowering time 4,0 sec. Turning angle ±42,5°
Tipping time 2,2 sec. Turning radius with std bucket Inner 3283 mm (129 ")
Driving sp eeds f orward and reverse Turning radius with std bucket Outer 6519 mm (257 ")
1st gear 5,4 km/h (3.5 mph) Main components in steering system:
2nd gear 9,6 km/h (6.0 mph) Main valve
3rd gear 16,0 km/h (9.9 mph) Servo control valve
4th gear 27 km/h (16.8 mph) Steering cylinders 2 pcs, 125 mm (4.9 ")
Frame Steering and servo hydraulic Piston type
Rear and front frame Welded steel construction pumps
Central hinge Adjustable upper bearing Pressure settings:
Rear tanks are bolted to frame, hydraulic tank and cabin Steering hydraulics, main relief valve 13.0MPa(130 bar)
base are both bolted and welded to frame. Bucket hydraulics
Standard engine Joystick bucket and boom control (electric), equipped with
Diesel engine Mercedes OM 926 LA piston pump that delivers oil to the bucket hydraulic main
(Euro Stage III / Tier III) valve. The oil flow from steering hydraulic pump is directed
Output 220 kW (295 hp) / 2100 r/min to bucket hydraulics when steering is not used.
Torque 1200 Nm/1400 r/min Main components:
Number of cylinders in line 6 Boom system Z-link
Displacement 7 200 cm
3 Lift cylinders 2 pcs, ø160 mm (6.3 ")
Cooling system Water cooled Tilt cylinder 1 pcs, ø200 mm (7.9 ")
Combustion principle 4-stroke/turbo, intercooler Main valve
Electric system 24V Servo control valve
 Air filtering Dry type Pump for bucket hydraulics Piston type
Exhaust system Double wall exhaust pipe with Fittings ORFS
catalytic purifier / muffler Hoses High temperature
Fuel tank capacity 310 l (80 gal.) Oil cooler for hydraulic and
transmission oil, capability up
Standard converter to 52°C ambient temperature
Dana C5000 series One stage Pressure setting for:
Standard gearbox Servo circuit 3.5 MPa (35 bar)
Dana RT33000 series Power shift transmission with Bucket hydraulics 26.5 Mpa (265 bar)
modulation, with four gears Hydraulic oil tank capacity appr. 250 l (66 gal)
forward and reverse, automatic
gear control

Sandvik Mining and Construction reserves the right to change this ISO 9001 ISO 14001 Sandvik Mining and Construction Oy
specification without further notice P.O. Box 434
20101 Turku, Finland
Tel. +358 205 44 131
Fax +358 205 44 130
www.smc.sandvik.com
CERTIFICATED CERTIFICATED
FIRM FIRM
 TECHNICAL SPECIFICATION
Sandv ik LH410 LH410-18 (16.09.2011)
3/3

Standard brakes Main optio ns:

Service brakes are spring applied, hydraulically released * Replaces standard equipment
multidisc wet brakes (Posi-Stop) on all wheels, two separate * Engine Volvo TAD941VE, Euro Stage 2 / Tier II
circuits for the front and rear axle. Service brakes also 220kW (295 hp), 1400 Nm / 1200 r/min
3 3
function as an emergency and parking brake. Electrically • * Bucket size 4.6 m (6.0 yd ), width 2588 mm(102”),
driven pump for brake releasing. Automatic brake activation GET abrasion system
3 3
 ABA. • * Bucket size 5.0 m (6.5 yd ), width 2588 mm (102”),
Main components in the brake system: GET abrasion system
Pressure accumulator Hydroll 3 3
• * Bucket size 5.4 m (7.0 yd ), width 2588 mm (102”),
Brake pedal valve Mico GET abrasion system
Charging valve Parker  • * Ejector bucket si ze 4.6 m³ (6.0yd³), width 2770 mm (109”),
Standard Lubrication system HB500/400
Centralized manual lubrication • * Side tipping bucket, 4,6 m3

Electric al equipment • * Safety cabin, ROPS/FOPS, height 2385 mm (94”), A/C,

 Alternator 100 A, Bosch electrical steering & bucket control

Batteries 2 x 12 V • * Automatic central lubrication

Starter 24 Volt, Bosch • Emergency steering (CEN)

Driving and working lights 2 pcs in front 65 W • Fire suppression system ANSUL, two tanks, 8 nozzles
2 pcs in rear 65 W (CEN), incl. auto engine shut down
2 pcs in canopy 65 W • Fire suppression system ANSUL, two tanks, 8 nozzles
Parking ligths 2 pcs in front (LED ligths) (CEN), CHECKFIRE, incl. auto engine shut down
2 pcs in rear (LED ligths) • Fire extinguisher 12 kg (CEN)
Brake lights • RRC HBC, complete
Blinkers • RRC interface HBC
Control system 5,7” display, 5 modules, • RRC recovery kit, hook included
inbuild system diagnostics • Ride control system
Safety equipment • Load weighing device, Tamtron PKV 300 M
Seat belt • Load weighing device, Tamtron PKV 300 C
Lockable main switch • Accordance with CE-norms (CEN)
Reverse alarm • Disassembly needed shaft dim: TBA
External shutdown, 2 pcs in rear • Rotating beacon (CEN with RRC)
Reverse alarm (CEN) • Wiggins fluid fill set (hydr., transmission and engine oil)
External shutdown 2 pcs in rear
• Wiggins fuel fill system
Others • CatBase/LinkOne spare part manuals and additional
Fire audited Instructions, Workshop, Spare part manuals, ToolMan CD’s
Decal language EU-languages are available
Standard manuals
Instructions Manual
-Operator's Manual EU-languages
-Maintenance Manual EU-languages
Parts Manual English
Service and Repair Manual English

ToolMan CD, (2 pcs) In pdf format

-Instructions Manual
-Operator's Manual
-Maintenance Manual
-Parts Manual
-Service and Repair Manual

Sandvik Mining and Construction reserves the right to change this ISO 9001 ISO 14001 Sandvik Mining and Construction Oy
specification without further notice P.O. Box 434
20101 Turku, Finland
Tel. +358 205 44 131
Fax +358 205 44 130
www.smc.sandvik.com
CERTIFICATED CERTIFICATED
FIRM FIRM