Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    ANT-2x2-2005H Install Guide PDF

    Uploaded by

    Wahyu Budiman
    The OC24006H is an omnidirectional, horizontally polarized antenna operating between 2400-2500 MHz with a gain of 6 dBi. It has a VSWR of 2.0:1, beamwidth of 25 degrees in the H-plane and is omnidirectional in the E-plane. The antenna can be mounted directly to an access point or on a pole/mast for optional positioning and weighs 0.26 kg.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ANT-2x2-2005H Install Guide PDF

    Uploaded by

    Wahyu Budiman
    40 views1 page
    The OC24006H is an omnidirectional, horizontally polarized antenna operating between 2400-2500 MHz with a gain of 6 dBi. It has a VSWR of 2.0:1, beamwidth of 25 degrees in the H-plane and is omnidirectional in the E-plane. The antenna can be mounted directly to an access point or on a pole/mast for optional positioning and weighs 0.26 kg.

    Original Title

    ANT-2x2-2005H_Install_Guide.PDF

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The OC24006H is an omnidirectional, horizontally polarized antenna operating between 2400-2500 MHz with a gain of 6 dBi. It has a VSWR of 2.0:1, beamwidth of 25 degrees in the H-plane and is omnidirectional in the E-plane. The antenna can be mounted directly to an access point or on a pole/mast for optional positioning and weighs 0.26 kg.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    40 views1 page

    ANT-2x2-2005H Install Guide PDF

    Uploaded by

    Wahyu Budiman
    The OC24006H is an omnidirectional, horizontally polarized antenna operating between 2400-2500 MHz with a gain of 6 dBi. It has a VSWR of 2.0:1, beamwidth of 25 degrees in the H-plane and is omnidirectional in the E-plane. The antenna can be mounted directly to an access point or on a pole/mast for optional positioning and weighs 0.26 kg.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    OC24006H

    SPECIFICATIONS
    Parameter Performance
    Model Number OC24006H
    Frequency 2400-2500 MHz
    Gain 6 dBi
    Polarization Linear, Horizontal
    VSWR 2.0:1
    E-Plane 3 dB Beamwidth Omnidirectional
    H-Plane 3 dB Beamwidth 25°
    RF Connector Model Specific
    Power 10 Watts
    Weight 0.26 Kg
    Radome Polycarbonate, UV, White
    Operational Temperature -30°C to +70°C
    Storage Temperature -40°C to +85°C
    Mounting Connector Fixed or Mast
    Mount Kit, Upright and
    Inverted Orientation
    Dimensions 329 mm x 45 mm

    SAFETY
    Important Note : Please read all instructions carefully before
    attempting to install and use this product.

    APPLICATION
    The Laird Technologies’ OC24006H is a 2400-2500 MHz
    omnidirectional, collinear, horizontally polarized array
    especially designed to compliment interior or exterior
    mounted wireless network systems. An integrated RF
    connector is imbedded in the antenna base cap for direct AP
    Warranty and Liability mounting. Special venting permits either upright or inverted
    Laird Technologies warrants to the original purchaser that antenna products will
    remain free from defects in materials and workmanship for a period of twelve orientation in outdoor locations. The antenna may also be
    (12) months from the purchase date. If any such defect is discovered with in the
    warranty period, Laird Technologies will at its sole option, repair or replace the
    pole-mounted when separation from the AP is required for
    Product free of charge upon its return to the factory. This warranty applies only optimum positioning.
    if the Product is used in a normal fashion, and is void if the Product is abused,
    disassembled, tampered with, used unreasonably, or fails as a result of normal
    wear. Furthermore, this warranty applies only to defects, which occur where the LOCATION
    proper Product is selected as recommended by Laird Technologies and is used in
    the fashion recommended by Laird Technologies for the defective Product. THIS For best results, mount the antenna and the associated AP unit
    WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND
    IS LIMITED TO A PERIOD OF TWELVE(12) MONTHS FROM THE DATE OF ORIGINAL near ceiling level or above exterior obstructions in a location
    PURCHASE. LAIRD IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES near the center of the coverage area. A line-of-sight path
    OF ANY KIND. ANY WARRANTY EXTENDED HEREIN SHALL BE LIMITED TO THE
    PRICE PAID TO LAIRD FOR THE DEFECTIVE PRODUCT. WHERE STATE OR LOCAL between the antenna and active locations generally works
    LAW GOVERNS THE PERIOD OF WARRANTY, SUCH PERIOD SHALL CONTROL
    best. Although 2.4 GHz signals penetrate cubical dividers,
    partitions, and interior walls with little attenuation, reinforced
    block walls, metal surfaces, and steel shelving may attenuate
    signals or cause multi-path, a condition where reflected signals
    interfere with the primary signal path. Avoid mounting next
    to a column or vertical support that could create a “shadow
    Americas: +1.847 839.6907 zone” of reduced coverage to one portion of the room.
    IAS-AmericasEastSales@lairdtech.com
    Europe: +1.32.80.7866.12
    MOUNTING
    IAS-EUSales@lairdtech.com The antenna mounts directly to a connector on the unit
    Asia: +1.65.6.243.8022 itself or it may also be pipe-mounted and fed with an in-
    IAS-AsiaSales@lairdtech.com line RF connector when alternative positioning is required.
    www.lairdtech.com
    165-00019_AA

    You might also like