CV
CV
CV
SUMMARY
Over 11 years professional experience as rotating equipment engineer, turbomachinery engineer and
reliability engineer in oil and gas industry both offshore and onshore. Competency covers rotating
equipment/turbomachinery engineering, operation, maintenance and troubleshooting. Hands on
experience for Siemens/Rolls Royce Avon and RB211 aeroderivative gas turbine and Solar Turbines
gas turbine. Familiar and have wide experience in executing Maintenance Management System
(MMS) such as SAP. Conducting Root Cause Analysis (RCA) for turbomachinery related failure.
Develop Long Range Planning (LRP) in terms of time and budget for turbomachinery equipments.
Prepare turbomachinery contractual to cover maintenance, repair and overhaul for turbomachinery.
Coordinate and liase with SKK Migas for turbomachinery maintenance activities, such as Work
Program & Budget (WP&B), Authorization for Expenditure (AFE), Place in Service (PIS).
EDUCATIONAL BACKGROUND
1. University of Indonesia (UI), Depok 2001 – 2005
Bachelor degree in Mechanical Engineering (Energy Conversion)
2. SMUN 13, Jakarta. 1998 – 2001
WORK EXPERIENCES
1. MEDCO E&P NATUNA LTD Nov 2017 - Now
Sr. OFFSHORE SERVICE ENGINEER (TURBOMACHINERY SERVICE
ENGINEER)
Roles and Responsibilities:
To ensure offshore compression and power generation units are maintained at high quality and
operated optimum condition by providing guidance and direction to Offshore Maintenance and
Operation personnel. Compression and Power Generation units are as follows:
Siemens SGT-A30RB (previously known as Rolls Royce RB-211-24G with RT-62 Power
Turbine) Aero derivative gas turbine.
Siemens SGT-A20AV (previously known as Rolls Royce Avon 1535 and 200 with RT-56
Power Turbine) Aero derivative gas turbine.
Solar Turbines Taurus70 T10301, Taurus 60 T7901, Centaur 40 T4702 industrial gas
turbine.
Dresser Rand Datum Centrifugal Gas Compressor.
Atlas Copco Mafi Trench TurboExpander.
General Electrica Rotoflow Turboexpander with Active Magnetic Bearing (AMB).
Job Description and Experiences:
1. Provide machinery engineering expertise and guidance in the installation, maintenance and
repair of rotating equipment.
2. Assure rotating equipment operability and reliability requirements and optimize
performance.
3. Observe visually condition and performance of Offshore Compression and Power Generation
units.
4. Minimized unscheduled shutdown of Offshore Compression and Power Generation by doing
immediate troubleshooting.
5. Execute recommendation or instruction given by Performance Monitoring team
6. Provide QA/QC for major/critical rotating equipment work at site or at workshop.
7. Inspect, analyzed/interpret and report condition of gas turbines and major/critical rotating
equipment.
8. Develop and coach maintenance personnel to be fully aware with high quality inspection.
2. MEDCO E&P NATUNA LTD (previously ConocoPhillips Indonesia) Nov 2016 – Oct 2017
Sr. ROTATING EQUIPMENT ENGINEER
Job Description and Experiences:
Please refer to Job Description and Experiences at ConocoPhillips Indonesia. Position and Job
Description is still the same.
3. CONOCOPHILLIPS INDONESIA May 2014 – Oct 2016
ROTATING EQUIPMENT ENGINEER
Roles and Responsibilities:
Responsible for the technical support and reliability of all Rotating/Mechanical Equipment
(turbomachinery, generators, compressors, engine) in ConocoPhillips Indonesia offshore area.
Ensure rotating equipment maintenance strategies are in alignment with plant operating
strategies.
Job Description and Experiences:
1. Provide machinery engineering expertise and guidance in the installation, maintenance and
repair of rotating equipment.
2. Support field service engineers.
3. Assure rotating equipment operability and reliability requirements and optimize
performance.
4. Prepare and monitor Planning and Schedulling for Turbomachinery Maintenance activities
such as 24M Planning and Schedulling, 30/90 Planning Schedulling.
5. Managing Turbomachinery Overhaul Plan and Budgeting of 29 fleets Gas Turbine
Compressor, TurboExpander and Gas Compressor
6. Prepare and develop Long Term Planning (LRP) for turbomachinery equipment, ensure the
availability of the budgets.
7. Liaise with SKK Migas for Planned and Unplanned Turbomachinery activities and ensure all
the activities have SKK Migas Approval.
8. Prepare SKK Migas approval documents for Authorization For Expenditure (AFE), such as
Project Summary (PS), Evaluasi dan Standarisasi Biaya (ESB), Budget Schedule (BS) and
ensure all the documents submit in Work Program and Budget (WP&B).
9. Prepare and develop Maintenance Service Contract for Turbomachinery equipments.
10. Supports the defect elimination process, Root Cause Analysis (RCA), identifies issues through
analysis, and provides technical resolution to rotating equipment issues.
11. Liase with OEM technical advisor/support for turbomachinery related issues, and provide
technical support for field personnel.
12. Perform Centrifugal Gas Compressor evaluation as well as Gas Turbine Driver performance.
4. PT. PERTAMINA HULU ENERGI WMO (PT. PHE WMO) Jan 2012 –
ENGINEER RELIABILITY May 2014
Key Accountabilities:
1. Responsible for availability and reliability of turbomachinery equipments by providing
engineering or technical recommendation to Operation and Maintenance department.
2. Improve turbomachinery maintenance strategy by developing and implementing RCM (Reliability
Centered Maintenance) study.
3. Initiates and ensures all Health, Safety and Environment aspects are implemented on all process
activities of all surface facilities, Including but not limited to ISO 14001, OHSAS 18001, PROPER,
HSE Meeting. Near miss, STOP Card.
Job Description and Experiences:
1. Provide reliability engineering/technical advisory related to surface equipments reliability to
operation and maintenance department.
2. Develop and implement Reliability Centered Maintenance (RCM) methodology, of
turbomachinery and critical rotating equipment to improve maintenance strategy.
3. Develop and implement Predictive Maintenance/Condition Based Maintenance, as one of RCM
output, for turbomachinery and critical rotating equipment.
4. Develop Predictive Maintenance activities and bussiness process to be implemented at SAP PM
(CMMS).
5. Utilise reliability engineering tools, such as Failure Mode and Effect Analysis (FMEA) to capture
Failure Mode Criticality, Root Cause Failure Analysis (RCFA) to solve repetitive failure.
6. Develop SAP PM (CMMS) as per ISO 14224, Petroleum, petrochemical and natural gas industries
– Collection and exchange of reliability and maintenance data for equipment.
7. Develop Work Package and Budget for reliability program as per Work Program and Budget
(WP&B).
8. Perform daily monitoring of turbomachinery and critical rotating equipment.
9. Prepare engineering package (scope of work) and engineering specification for water injection
pump application and gas turbine compressor control system retrofit.
10. Review and evaluate technical quotation (proposal) of water injection pump and gas turbine
compressor control system retrofit from suppliers.
5. PT. PERTAMINA HULU ENERGI WMO (PT. PHE WMO) May 2011 – Dec 2011
SUPERVISOR TURBOMACHINERY
Job Description and Experiences:
Please refer to Job Description and Experiences at Kodeco Energy Co., Ltd. Currently Position and Job
Description is still the same.
6. KODECO ENERGY CO., Ltd 2007 – 2011
SUPERVISOR TURBOMACHINERY
Key Accountabilities:
1. Responsible for operation, maintenance and performance of critical turbomachinery equipments
to achieve high availability and reliability to support production operation by minimizing
unplanned shutdown, and optimizing planned shutdown.
2. Ensure maintenance programs and plans of critical turbomachinery equipment are performed in
accordance to SAP PM (CMMS) schedule and in a safely manner as per company’s standard.
3. Ensure all resources, manpower, materials, special tools are available to perform maintenance
activities.
4. Ensure all pre-job activities document, such as Working Instruction (WI), Task Based Risk
Assessment (TBRA) are available and updated before executing the job.
5. Ensure all maintenance activities and bussiness process are recorded and input in SAP PM
(CMMS).
6. Initiates and ensures all Health, Safety and Environment aspects are implemented on all process
activities of all surface facilities, Including but not limited to ISO 14001, OHSAS 18001, PROPER,
HSE Meeting. Near miss, STOP Card.
Job Description and Experiences:
1. Perform Planned (Preventive) Maintenance activites of turbomachinery equipment such as 2000
hours, 4000 hours and 8000 hours service.
2. Perform Unplanned (Corrective) Maintenance, including troubleshooting for turbomachinery
equipments.
3. Maintain and implement maintenance activities at SAP Plant Maintenance, such as creating Work
Order, Maintaining Work Order, Closing Work Order, Creating Service Order, Creating Material
Reservation, Maintaining Measurement Point, etc.
4. Perform condition monitoring, such as vibration analysis, lube oil analysis and equipment health
condition of all turbomachinery equipment, and give recommendation based on equipment
health.
5. Plan and prepare manpower, materials, and special tools for performing preventive maintenance
activities.
6. Responsible for maintaining and updating Standard Operational Procedure (SOP), Working
Instruction (WI), Task Based Risk Assessment (TBRA) for all turbomachinery equipment activities.
7. Prepare and plan short and long range planning for turbomachinery equipment, such as Gas
Turbine, Gas Compressor, Gas Engine and Diesel Engine Overhaul, Gas Turbine Engine Exchange.
8. Witness external maintenance service performed by third party such as Gas Turbine and Gas
Compressor Teardown and overhaul activities at third party workshop.
9. Assist and act as engineering point of view for operation and maintenance department for
comissioning and start-up PPP Booster Compression Project (Solar Taurus 60 Gas Turbine) and
PPP Gas Lift Project (Solar Saturn 20 Gas Turbine).