Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    29H

    Uploaded by

    Kapa Kamalakar
    The document contains specifications and notes for an optional flange mounting block and drive sheave. Key details include dimensions for holes, overall lengths, and minimum/maximum parameters like speed, tension, wrap angle, and temperature. The notes specify that standard components will be used unless otherwise specified and that the drawings contain proprietary information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    29H

    Uploaded by

    Kapa Kamalakar
    49 views1 page
    The document contains specifications and notes for an optional flange mounting block and drive sheave. Key details include dimensions for holes, overall lengths, and minimum/maximum parameters like speed, tension, wrap angle, and temperature. The notes specify that standard components will be used unless otherwise specified and that the drawings contain proprietary information.

    Original Description:

    idler pulley calculations

    Original Title

    18503-29H

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains specifications and notes for an optional flange mounting block and drive sheave. Key details include dimensions for holes, overall lengths, and minimum/maximum parameters like speed, tension, wrap angle, and temperature. The notes specify that standard components will be used unless otherwise specified and that the drawings contain proprietary information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views1 page

    29H

    Uploaded by

    Kapa Kamalakar
    The document contains specifications and notes for an optional flange mounting block and drive sheave. Key details include dimensions for holes, overall lengths, and minimum/maximum parameters like speed, tension, wrap angle, and temperature. The notes specify that standard components will be used unless otherwise specified and that the drawings contain proprietary information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    2 1

    OPTIONAL FLANGE MOUNTING BLOCK: OPTIONAL DRIVE SHEAVE:

    3.500
    1.875

    .750
    1.250 .875
    .500
    NOTES: 6.000 O.D. DRIVE SHEAVE
    B 2.000 5.600 P.D. B BELT B
    3.000 5.200 P.D. A BELT
    3.000
    .531 HOLE THRU (2)
    .531 HOLE THRU (4) 1.250 1.375
    1.500 5.875 5.500 .625 .750

    3.000
    4.500
    6.000

    WEB WIDTH = MAX. WIDTH + WEB WANDER .750

    FACE=WEB WIDTH + 4.000 MIN. 1.500 MIN.

    MTG. CENTERS = FACE + 4.312 MIN.

    OVERALL LENGTH = MTG. CENTERS + 1.250 MIN.


    NOTE: STANDARD COMPONENTS WILL BE USED
    CUSTOMER: UNLESS OTHERWISE SPECIFIED.
    APPROVED BY: DATE: THESE DRAWINGS AND SPECIFICATIONS CONTAIN INFORMATION WHICH
    CONVERTER ACCESSORY CORPORATION CONSIDERS PROPRIETARY AND CONFIDENTIAL.
    OPTIONS: NO PORTION OF THIS DRAWING MAY BE REPRODUCED OR COPIED WITHOUT PRIOR
    WRITTEN PERMISSION OF CONVERTER ACCESSORY CORPORATION.
    MOUNTING BRACKETS:
    STD. (PILLOW BLOCK) FLANGE NONE OPERATING SPECIFICATIONS: CONVERTER ACCESSORY CORP.
    DR.&TAP ENDS THREAD, DEEP MACHINE:
    A MATERIAL: A
    DRIVE SHEAVE WIND GAP, PA 18091
    RUBBER SLEEVE: THICKNESS: MIN. MAX.
    WWW.CONVERTERACCESSORY.COM
    STD. NEOPRENE, 50 DURO HARDNESS WIDTH: MIN. MAX. TITLE
    SPECIAL RUBBER: SPEED: MIN. MAX.
    DUROMETER HARDNESS: TENSION: MIN. MAX. 5.50 WRINKLESTOP ANTI-WRINKLE ROLL
    DESIGN PARAMETERS: WEB WANDER: MAX.
    MAX. ROLL SPEED: 1000 FPM WRAP ANGLE: SIZE DWG NO REV
    MAX. TENSION: 12 PLI TEMPERATURE AT SLEEVE: A 18503-29H H
    MIN. TURNING FORCE: .25 PLI IS OZONE PRESENT? YES NO
    DATE DRAWN FILE QUOTE NO.
    WT. 13# + 1.7#/IN. OF FACE CHEMICAL CONTACT WITH SLEEVE? YES NO
    MEMAST
    DEAD SHAFT CONSTRUCTION IF YES, SPECIFY:
    2 1

    You might also like