Electrical

Tapes


 Electrical Tapes
Electrical Tapes

3M offer a range of over 30 electrical 33+ Vinyl tape to Scotch® 130C Linerless
tapes and mastics for insulation, jointing, rubber splicing tape to Scotch® 2200
Terminations
Low Voltage

corrosion protection, all weather protection Mastic pads, 3M Electrical Tapes provide
Joints &

and environmental sealing. From Scotch® exceptional performance and reliability.

Cold Shrink tubes
& End Caps
Earthing Kits
Resins
Medium Voltage
Terminations
Joints &
Termination Kits
Hazard Area
Joint &
Management
Cable & Wire

PVC Insulating Tape

Scotch® Super 33+ High Quality PVC

Connectors

Scotch® Super 33+ Electrical Tape is a premium grade, 0.178mm thick, all-weather vinyl
Lugs &

insulating tape. It is designed to perform continuously in ambient temperatures of up to

105°C (220°F). The tape is conformable, and suitable for cold weather applications down
to –18°C (0°F). The combination of elastic backing and aggressive adhesive provides
moisture-tight electrical and mechanical protection with minimum bulk.
Features
Heat Shrink

• Excellent resistance to abrasion, moisture, alkalis, acids, corrosion and varying weather
conditions (including ultraviolet exposure)
• Flame retardant
• Conforms to BS 3924 and UL510
Size Colour Applications
Locators & Electronic
Marker Systems

19mm x 20m Black • Primary electrical insulation for all wire and cable splices rated up to 600V and 105°C
Cable & Fault

(220°F).

 To find out more about our complete range of Electrical Products, please call our Customer Service Team on 01234 229 462
 Electrical Tapes
PVC Insulating Tape

Scotch® Super 88 - All Weather PVC Tape

Scotch® Super 88 Electrical Tape is a premium grade, 0.216mm thick, all-weather vinyl
insulating tape. It has excellent resistance to abrasion, moisture, alkalis, acids, corrosion

Terminations

Low Voltage
Joints &
and varying weather conditions (including ultraviolet exposure). The combination of elastic
backing and aggressive adhesive provides moisture-tight electrical and mechanical
protection with minimum bulk.
Features
• Designed to perform continuously in ambient temperatures of up to 105°C (220°F) and

Cold Shrink tubes

conformable for cold weather applications down to - 18°C (0°F)

& End Caps

• Good elongation for excellent conformability to irregular surfaces
• Flame retardant
Sizes
19mm x 20m
• Excellent abrasion and puncture resistance
25mm x 33m • Meets BS 3924 and UL 510

Earthing Kits
38mm x 33m
Applications
• Primary electrical insulation (especially at low temperatures) for harnessing all wires
and cable joints up to 600 volts and 105°C

Resins
Scotch® 35 Tape - Colour Coding PVC
Scotch® 35 Vinyl Electrical Colour Coding Tape is an electrical grade, 0.178mm thick PVC
tape with a pressure sensitive rubber adhesive, available in nine fade resistant colours.
Features
• Abrasion and weather resistant, excellent electrical insulating properties, wraps

Medium Voltage
Terminations
smoothly, conforms well and holds over a wide range of temperatures

Joints &
(0°C to 80°C)
• Resistant to moisture, alkalis, acids, U.V and corrosion
• Conforms to BS 3924 and UL 510
Applications

Termination Kits

Hazard Area
Sizes Colours • Scotch 35 Tape is designed for use in phase identification, Colour coding of motor leads

Joint &
19mm x 20m Red and piping systems, and for marking safety areas
19mm x 20m Blue • Joint, Termination and Connector insulation up to 600V
19mm x 20m Brown
19mm x 20m Yellow
19mm x 20m White
Management
Cable & Wire

Scotch® 22 Tape - Heavy Duty PVC

Scotch® 22 Electrical Tape is a premium grade, 0.254mm thick, vinyl insulating tape. It is
designed to perform continuously in ambient temperatures up to 80°C (176°F). The tape
Connectors

is conformable, and suitable for cold weather applications down to –10°C (15°F). It has
Lugs &

excellent resistance to abrasion, moisture, alkalis, acids, corrosion and varying weather
conditions (including ultraviolet exposure).
Features
• High elastic memory
• Flame retardant
Heat Shrink

• Temperature rating from -10°C to 80°C

Sizes
12mm x 33m
• High resistance to corrosion, U.V, moisture and chemicals
19mm x 33m • Conforms to BS 3924 and UL 510
25mm x 33m Application
Locators & Electronic

38mm x 33m
Marker Systems

• Suitable for all heavy-duty applications, including bus bar insulations, harnessing, cable
Cable & Fault

50mm x 33m
sheath repair and sealing connectors

For Technical Support please call 01234 268 868 

 Electrical Tapes
PVC Insulating Tape

Scotch® 33 Tape - General Purpose PVC

Scotch® 33 Electrical Tape is a quality, 0.178mm thick, general-purpose vinyl insulating
tape. It has excellent resistance to abrasion, moisture, alkalis, acid, copper corrosion and
Terminations
Low Voltage
Joints &

varying weather conditions (including sunlight). It is a polyvinyl chloride (PVC) tape that
has a high dielectric strength, is flame retardant and conformable, and provides excellent
mechanical protection with minimum bulk.
Features
• Flame retardant
Cold Shrink tubes

• Wraps and conforms easily

& End Caps

Sizes • Forms a protective jacket (excellent abrasion resistance for high voltage cable joints and
9mm x 33m terminations)
12.7mm x 33m
19mm x 33m
• Conforms to BS 3924 and UL510
25mm x 33m Applications
Earthing Kits

38mm x 33m • The tape is designed to perform in a continuous operating temperature up to 80°C
50mm x 33m
• Indoor or outdoor insulations (especially in moisture and solvent vapour areas) for all
general purposes wiring applications and cable joints up to 600V
Resins

Scotch® 780 - PVC Electrical Tape

Scotch® 780 Electrical Tape is a good quality, 0.178mm thick, medium purpose PVC
insulating tape.
It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is conformable and
Medium Voltage

provides very good mechanical protection with minimum bulk.

Terminations
Joints &

Features
• Excellent resistance to abrasion, moisture, alkalis, acid and varying weather conditions
(including sunlight)
• Flame retardant
Sizes
Termination Kits

Applications
Hazard Area

19mm x 20m
Joint &

• Primary electrical insulation for all wire and cable joints and repairs.
• Harnessing of wire and cables.
• Indoor and outdoor applications at temperatures from -10°C to +80°C.
Management
Cable & Wire

Temflex™ 1500 – PVC Electrical Tape

Temflex™ 1500 Electrical Tape is a good quality, 0.15mm thick, general-purpose PVC
insulating tape. Available colours are: black, blue, brown, yellow, yellow/green, grey,
Connectors

orange, red, white, and green.

Lugs &

Features
• Good resistance to abrasion, moisture, alkalis, acid and varying weather conditions
(including sunlight)
• High dielectric strength, conformable and provides good mechanical protection with
minimum bulk
Heat Shrink

• Meets requirements of IEC 60454-3-1-5/F-PVCP/90 and has VDE Marks Licence

Applications
• Primary electrical insulation for all wire and cable joints and repairs
Sizes • Harnessing of wire and cables
Locators & Electronic
Marker Systems

19mm x 25m • For indoor and outdoor applications

Cable & Fault

10 To find out more about our complete range of Electrical Products, please call our Customer Service Team on 01234 229 462
 Electrical Tapes
Self Amalgamating, Insulating and Splicing Tape

Scotch® 23 Tape - Premium Grade Self Bonding Rubber

Scotch® 23 Electrical Tape is a highly conformable 0.76mm thick, self amalgamating EPR

Terminations
(Ethylene Propylene Rubber) based, high voltage jointing tape. It is non-vulcanising and

Low Voltage
Joints &
shelf-stable with excellent electrical properties. 23 Tape can be used as insulation for low
voltage applications as well as insulation for joints up to 69kV.
Features
• Physical and electrical properties are unaffected by the degree of stretch

Cold Shrink tubes

• Can be stretched up to 100% to give void-free, moisture-resistant insulation

& End Caps

Sizes
• Self-almalgamating tape
19mm x 9.15m • Excellent electrical properties
25mm x 9.15m
Application
38mm x 9.15m
50mm x 9.15m • Primary insulation for building stress cones on cables up to 35kV

Earthing Kits
• Primary electrical insulation for cable jointing and terminating up to 69kV with up to
90°C continuous operating temperatures and 130°C emergency overload temperature

Resins
Scotch® 130C Linerless Self Bonding Tape – EPR
Scotch® 130C Electrical Tape is a highly conformable, 0.762mm thick, linerless self
amalgamating EPR (Ethylene Propylene Rubber) based, high voltage insulating tape
formulated to provide excellent thermal dissipation of splice heat. The tape is designed for

Medium Voltage
use in splicing and terminating wires and cables.

Terminations
Joints &
Features
• Non-vulcanizing and highly conformable
Sizes
19mm x 9m
• U.V, weather and corona resistant
• Flame retardant

Termination Kits
25mm x 9m

Hazard Area
38mm x 9m

Joint &
• Self-almalgamating tape
50mm x 9m
Applications
• Primary electrical insulation for cable jointing and terminating up to 69kV with up to
90°C continuous operating temperatures and 130°C emergency overload temperature

Management
Cable & Wire
• Moisture sealing electrical connections
• Bus bar insulations
• End sealing high-voltage cables
Connectors
Lugs &

Sizes Temflex™ 2151 Economy Grade Self Bonding Rubber -

19mm x 9.15m Temflex™ 2151 Electrical tape is a highly conformable, 0.51mm Thick, self-fusing EPR
(Ethylene Propylene Rubber) based low voltage jointing tape.
Heat Shrink
Locators & Electronic
Marker Systems

Cable & Fault

For Technical Support please call 01234 268 868 11

 Electrical Tapes
Self Amalgamating, Insulating and Splicing Tape

Scotch® 70 - Silicone Rubber Tape

Scotch® 70 Silicone Rubber Electrical Tape is a 0.3mm thick, high temperature arc-and
track-resistant tape composed of self-fusing, inorganic silicone rubber, with easy-tear and
Terminations
Low Voltage

easy-strip liner.
Joints &

Features
• Excellent track resistance
• Excellent arc resistance
Sizes
• Excellent ozone resistance
Cold Shrink tubes

25mm x 9m
• High dielectric strength
& End Caps

• Class “H” material (180°C continuous operation)

• Workable in extremely low temperatures
• Excellent conformability
• Excellent instantaneous fusion; does not need to be held down

Applications
Earthing Kits

• As an Over-wrap for protection of terminating high-voltage cables against arcing and

tracking

Scotch® 13 Tape - Semi Conducting EPR

The soft, black rubber tape is a 0.762mm thick, highly conformable, semi-conducting EPR
Resins

(Ethylene Propylene Rubber) based high-voltage splicing tape. It is non-vulcanising and

shelf stable, with stable conductivity over a wide temperature range. Its conductivity is not
affected, except by low-viscosity oils. The conductivity of cable semi-conducting jackets is
not affected by 13 Tape.
Medium Voltage

Terminations

Features
Joints &

Sizes • Remains stable at 130°C and is non-vulcanising

19mm x 4.5m • Elongates easily to form irregular shapes
• Resist cracking, solvents, U.V and moisture
• Tape and liner boldly printed to distinguish from insulating tape
• Meets requirements of ADTM-D4388, Type IV
Termination Kits
Hazard Area
Joint &

Application
• Electrically rounds-off high voltage connectors and lugs
• Provides screen continuation for high voltage joints and terminations
• Replaces semi-conducting layer beneath metallic shield of damaged cables
• Forms conductive portion of stress cones
Management
Cable & Wire

Scotch® 2220 - Stress Control Tape

0.762mm thick, mastic tape, for stress control applications in joints and terminations at
all voltages.
Connectors

Features
Lugs &

• Temperature rating: 90°C continuous operating with emergency overload temperature

of 130°C
• Changes voltage distribution in the electrical field surrounding a high voltage
termination or joint.
• Reduces stress concentration to values found in continuous cables
Sizes
Heat Shrink

19mm x 4.5m Applications

• Provides stress relief for all cable terminations and high voltage joints
Locators & Electronic
Marker Systems
Cable & Fault

12 To find out more about our complete range of Electrical Products, please call our Customer Service Team on 01234 229 462
 Electrical Tapes
Mastic, Sealing and Insulating Tapes

Scotch® 2210 - Vinyl Mastic Tape

Scotch® 2200 Vinyl Mastic Pads

Terminations

Low Voltage
Scotch® Tape VM 2210 and 2200 Pads are self-fusing, rubber based insulating

Joints &
compounds, laminated to a flexible, all-weather grade vinyl (PVC) backing. These products
are designed to insulate and moisture-seal all connections up to 600 volts, and have
excellent resistance to abrasion, moisture, alkalis, acid, copper corrosion and varying
weather conditions (including sunlight).

Cold Shrink tubes

Features

& End Caps

• Compatible Rubber Mastic
Sizes (2210 Tape) • Flexible over wide range of temperatures
19mm x 6m • Highly resistant to ultraviolet light
38mm x 6m • Usable for indoor or outdoor applications
Backing and Mastic:
* Thickness 0.815mm (19x38mm rolls) Applications (600V maximum)

Earthing Kits
* Thickness 1.18mm (101mm rolls) • Bolted connections
• Service drops
Sizes (2200 Pads) • Traffic signal wire connections
114mm x 165mm • Lighting connections
Backing and Mastic: • Transformer bushing protection
* Thickness 3.2mm

Resins
Scotch® 2228 - Rubber Mastic Tape (EPR)

Scotch® 2228 is a 1.65mm thick, conformable self-fusing rubber electrical insulating and
sealing tape. Scotch® 2228 consists of an EPR (ethylene propylene) backing coated with

Medium Voltage
Terminations
aggressive, temperature-stable mastic adhesive. It is designed for electrical insulating and

Joints &
moisture sealing applications.
Features
Size • Conformable for application over irregular surfaces
50mm x 3.03m • Compatible with solid dielectric cable insulations

Termination Kits
• Self-fusing tape

Hazard Area
• Flexible over wide temperature range

Joint &
• Excellent weather and moisture resistance
• Excellent adhesion and sealing characteristics with copper, aluminium and power cable
jacket materials

Applications
Management
Cable & Wire
• Primary electrical insulation for cable and wire connections rated up to 1000 volts
• Primary electrical insulation for bus bar connections rated up to 35kV

Scotch® 2221 - Mastic Tape

Connectors
Lugs &

Scotch® 2221 Tape provides excellent oil barrier and shows good stress control
characteristics. It is a 1.5mm thick, soft, self-fusing, oil resistant, elastomeric PU mastic
tape on a liner for medium voltage applications.

Features
• Good stress control
Heat Shrink

• Oil resistant

Applications
Size • Scotch® 2221 Tape is designed for use in oil barrier applications in paper, insulated MV
19mm x 1.5m cable joints and terminations
Locators & Electronic
Marker Systems

Cable & Fault

For Technical Support please call 01234 268 868 13

 Electrical Tapes
Mastic, Sealing and Insulating Tapes

Scotch® 2229 - Mastic Tape

Scotch-Seal™ 2229 Mastic Tape is a 3.2mm thick, conformable, durable, tacky mastic
coated on an easy release liner.
Terminations
Low Voltage
Joints &

The product is designed for quick and easy insulating, padding and sealing of objects that
need to be protected from adverse environmental conditions. It is well suited for corrosion
protection.
Features
• Excellent adhesion and sealing characteristics to metals, rubbers, synthetic cable
Cold Shrink tubes

Size insulations and jackets

& End Caps

95mm x 3.08m
• Wide temperature stability while maintaining its sealing properties. (-34°C to 71°C)
• Conformable and moldable for easy applications over irregular surfaces
• Does not crack when subjected to repeated flexing
• Retains its flexibility at low temperatures resulting in ease of application and continuous
performance at reduced temperatures
Applications
Earthing Kits

• For sealing high voltage cable splice and termination accessories

• For insulating electrical connections rated up to 1000 volts if over wrapped with vinyl or
rubber electrical tape
• For padding irregular shaped connections
• For providing corrosion protection to a wide variety of electrical connections and applications
• For sealing ducts and cable end seals
• For sealing against dust, soil, water and other environmental conditions
Resins

Scotchfil™ - Electrical Insulation Putty

Scotchfil™ Electrical insulation putty is a 3.175mm thick electrical grade compound
Medium Voltage

in tape form. It is UL Recognised as a joint insulation for electrical conductors at

Terminations

temperatures up to 80°C (176°F) when over wrapped with either Super 33+ or Super 88
Joints &

Vinyl Electrical Tape.

Features
• Non-corrosive, synthetic rubber • Excellent electrical properties
• Excellent ageing properties • Will not dry out
Termination Kits

Size
• Applies cleanly without waste
Hazard Area

38mm x 1.5m
Joint &

Applications
• To insulate low-voltage (600 volts and less) connections
• To build up cable joints and fill out major irregularities and voids in low-voltage joints
(2300 volts and less) in order to obtain a uniform base for further taping
• To round out high-voltage connections to gear
Management
Cable & Wire

• To smooth bus bar irregularities

• To create a resin dam in resin pressure joints
• To create a moisture seal at ground wire exit in high-voltage joints
• To moisture seal multi-conductor cable connections

Scotch-Seal™ - 5313 Preformed Sealant Strip

Connectors
Lugs &

5313 is a tacky solid extrusion based on a synthetic rubber. High adhesive strength
– sufficient to cause cohesive failure of the sealer before loss of adhesion to the substrate,
when pulled with tension. The sealer is a non-curing type and retains the same properties
and consistency after ageing in several different environments, including weathering.
Features
• High adhesive strength
Heat Shrink

• Excellent water / weathering resistance

• Ozone resistant
• Service temperature range -29°C to 135°C
Application
Size Colour • Sealing applications in conjunction with 3M Cable Joints
Locators & Electronic

20mm x 10m Black

Marker Systems
Cable & Fault

14 To find out more about our complete range of Electrical Products, please call our Customer Service Team on 01234 229 462
 Electrical Tapes
General Purpose Tapes

Scotch® 2000 - Duct Tape

Scotch® 2000 Electrician’s Duct Tape is a 0.152mm thick, water resistant duct tape with

Terminations

Low Voltage
polyvinyl chloride (PVC) backing and a rubber adhesive.

Joints &
Note: This tape is not recommended for sealing air ducts

Features
• Easy tear

Cold Shrink tubes

• No cloth – does not absorb water

& End Caps

Size • Clean removal (minimal residue)
50mm x 46m
Applications
• Scotch 2000 is designed to be an electrician’s utility tape for holding and bundling
applications.

Earthing Kits
Marking Tapes
Scotch® 9545 Cloth Tape - Pre-printed Phase Marking
Scotch® 9545 is a heavy-duty cloth tape, pre-printed with phase marking identification

Resins
characters. The tape has either a yellow or white background, with black printing. Rolls
are 19mm x 10m Suitable for identification of electrical wires and cables. Tape thickness
0.27mm

Features

Medium Voltage
Terminations
• Banding – a good adhesive and non-stretch strength for a reliable grip

Joints &
Yellow
Printed Character Part Number Applications
L1 SL1-R • to assist in cable identification
L2 SL2-R
L3 SL3-R

Termination Kits
N SN-R

Hazard Area
Joint &
L SL-R
White
L1 SL1-RW
L2 SL2-RW
L3 SL3-RW
Management
Cable & Wire
N SN-RW
L SL-RW

Temflex™ 1700P Pre-printed Phase Marking Tape – PVC

Connectors

Temflex™ PVC pre-printed with phase marking identification characters. The tape has a
Lugs &

white background with black printing. Rolls are 15mm x 10m x 0.77mm

Features
White • Flame retardant
Heat Shrink

Printed Character Part Number • Operating temperature range - 10°C to 80°C

L T1700PL
L1 T1700PLI Applications
L2 T1700PL2
L3 T1700PL3
• To assist cable identification
Locators & Electronic

N T1700PN
Marker Systems

Cable & Fault

For Technical Support please call 01234 268 868 15

 Electrical Tapes
Corrosion & Protection Tape

Scotchrap™ 50 and 51 Tape - All Weather Corrosion

Protection
Terminations
Low Voltage
Joints &

Scotchrap™ 50 and 51 Tapes are tough, PVC (polyvinyl chloride) based tapes with
special high tack adhesives formulated to resist corrosion of metal piping systems
above and below ground, fittings and joints on all millcoated pipe and electrical
conduit systems.
Cold Shrink tubes
& End Caps

Features
Sizes
• Resists abrasion, moisture, corrosive salt water, soil acids, and alkalis and salts
50 Tape (1) 51 Tape (2)
25mm x 30.5m 25mm x 30.5m • Resistant to common chemicals, chemical vapours
50mm x 30.5m 50mm x 30.5m • Resistant to outdoor weathering and sunlight
101mm x 30.5m 101mm x 30.5m • Resistant to impact, abrasion, punctures and tears
152mm x 30.5m 101mm x 30.5m
Earthing Kits

• Both tapes have high electric strength, and excellent insulating properties.
(1) Thickness 0.254mm • Continuous operating temperature range from -48°C to 80°C
(2) Thickness 0.508mm
• Application temperature from -12°C to 65.6°C

Applications
• Protection of metal pipe systems both above and below ground.
Resins

• Use Scotchrap Pipe primer to prepare surfaces for tape application

• Use Scotchfil Electrical Insulation putty* to build up irregular surfaces to provide a
smooth, waterproof taping surface

*For information on Scotchfil Electrical Insulating Putty, see page 14

Medium Voltage

Terminations
Joints &

Scotch® 77 - Arc & Fire Proofing Tape

Scotch® 77 Tape is a 0.762mm thick, arc and fireproofing tape designed to protect
Termination Kits

all types of electrical cables. Its unique formulation allows the manufacture of
Hazard Area

an unsupported elastomer that expands in fire to provide a thick char build-up

Joint &

between the flame and cable. This insulating firewall acts as a heat shield and
flame barrier, thus protecting the cables and accessories.

Features
Sizes • Clean and easy to apply
Management
Cable & Wire

38mm x 6m
• Provides fault arc protection to adjacent wrapped cables
76mm x 6m
• Provides additional electrical insulation
• Resists U.V., water, salt water, acids and sewage

Applications
Connectors
Lugs &

• To fire and arc proof high-energy power cables where exposed to failures of other high-
energy cables (any cables within 45cm are considered to be exposed)
• To fire and arc proof control cables when high energy power cables are present
• To fire and arc proof all cables in areas where possibility of fire hazard exists
• To provide additional electrical insulation, thus reducing possibilities of transferred arcs
Heat Shrink

• To fire and arc proof piping systems (ie. gas, water, or oil lines)
• The installed tape to be secured with 2 layers of 69 glass cloth tape
Locators & Electronic
Marker Systems
Cable & Fault

16 To find out more about our complete range of Electrical Products, please call our Customer Service Team on 01234 229 462
 Electrical Tapes
Glass Cloth Tapes

Scotch® 27 Tape - Glass Cloth

Scotch® 27 Tape is a 0.178mm thick, woven glass cloth tape designed to operate in

Terminations

Low Voltage
Joints &
applications requiring high mechanical strength and resistance to high temperatures.
The glass cloth is specially treated and prepared to provide corrosion free protection. The
adhesive is a rubber pressure-sensitive thermosetting system.
Features
• The glass will not shrink, rot or burn and has a high tensile strength

Cold Shrink tubes

Size Colour
• The tape is designed for continuous use at class “B” (130°C) temperature with a high

& End Caps

12mm x 20m White
temperature thermosetting adhesive

Applications
• Useful applications include a heat-stable insulation for furnace and oven controls, motor
leads and switches

Earthing Kits
Scotch® 69 Tape - Glass Cloth Printable Film / Silicone
Adhesive
69 Glass Cloth Electrical Tape is a 0.177mm thick, white glass cloth tape with a high-

Resins
temperature thermosetting silicone adhesive. The thermosetting adhesive provides an
increased bond once applied in areas of high ambient temperatures.
Features
• 69 Tape is UL recognized for continuous use up to 180°C

Medium Voltage
• Meets requirements of Military Specification No. MIL-I-19166C

Terminations
Joints &
Applications
Sizes Colour • Insulating electric and induction type furnace power supply leads
• Securing high temperature, non-PSA insulations (such as asbestos and glass) in high
6mm x 33m White temperature areas
9mm x 33m White • To be used in conjunction with 77 Tape* for arc and fire proofing applications

Termination Kits

Hazard Area
12mm x 33m White

Joint &
15mm x 33m White *For information on 77 Tape, see page 16
19mm x 33m White
25mm x 33m White
38mm x 33m White
50mm x 33m White

Management
Cable & Wire
Scotch® 2510 - Cambric Tape

Scotch® Varnished Cambric Tape is made from straight-cut woven cotton cambric fabric.
The fabric is oil primed and coated with a high-grade yellow electrical insulating varnish.
Connectors
Lugs &

The tape is flexible, electrically insulating and moisture resistant with a smooth finish.
Features
• Designed to perform continuously in temperatures up to 105°C (220°F)
• Excellent resistance to abrasion, puncture and cut-through.
Sizes
Heat Shrink

19mm x 20m Application

• For insulating joints requiring rapid and clean re-entry
such as motor lead and service drop
• Connections, heavy split bolts in raceways and bus bar insulating.
Locators & Electronic
Marker Systems

Cable & Fault

For Technical Support please call 01234 268 868 17

 Electrical Tapes
Electrical Tapes Selection Chart

Electrical Tapes
Terminations
Low Voltage
Joints &

STRESS CONTROL FIRE PROOFING INSULATION GENERAL SEMI CONDUCTING PHASE MARKING EARTHING

2220 TAPE 77 TAPE 2000 DUCT TAPE 13 TAPE 1700P TAPE (PVC) 24 TAPE
Cold Shrink tubes
& End Caps

HEAVY DUTY HIGH CURRENT

Earthing Kits

9545 TAPE (CLOTH) 25 TAPE

HIGH TEMPERATURE MASTIC/SEALANT PVC SILICONE HIGH VOLTAGE (EPR)

(Self-fusing) (Track Resistant)
Resins

GLASS CLOTH 70 TAPE 23 TAPE

Medium Voltage

OIL BARRIER LINERLESS

Terminations

27 TAPE (130°C)
Joints &

69 TAPE (200°C) 2221 TAPE 130C TAPE

Termination Kits
Hazard Area

CORROSION
Joint &

HEAVY DUTY COLOUR CODED HIGH QUALITY ALL WEATHER COMMERCIAL GRADE
PROTECTION

22 TAPE GENERAL PURPOSE 33+ TAPE 88 TAPE 710 TAPE 50 & 51 TAPE
Management
Cable & Wire

HIGH QUALITY

1500 TAPE

35 TAPE
Connectors

SEALING & SEALING &

Lugs &

SEALING
INSULATION (Up to 1000V) INSULATION (Up to 600V)

SELF-FUSING NO BACKING EPR

Heat Shrink

5313 TAPE 2228 2229 SCOTCHFIL PUTTY VM2210 TAPE VM2200 (PAD)
Locators & Electronic
Marker Systems
Cable & Fault

18 To find out more about our complete range of Electrical Products, please call our Customer Service Team on 01234 229 462