DAY SIMULATOR MODULE TITLE SESSION OBJECTIVE METHODOLOGY DURATION

01 7000 XR Introduction • To know about the course and expectation of participants from the • Interactive 15 mins
course.
• Brief description about the course.
Introduction to • To understand the off board and onboard components of 7000 XR Series • Presentations 45 mins
7000 XR Simulator. • Instructor led
Series Simulator • To learn about various system of via 7000XR ARCHITECTURE LAYOUT. • Interactive
• To have a brief idea about the documentation associated with 7000 XR.
Simulator • To understand the location assigned to 7000XR Series Simulator. • Presentations 1 hr30 min
location • To locate the component involved in the interface of • Instructor led
identifier and 7000XR Series Simulator. • Interactive
interface
Console and • To be able to logon to the OpServer and PC nodes using KVM Switch, • Presentations 30min
Remote Login Remote Desktop connection, VNC & telnet. • Instructor led
Utilities • Interactive
overview.
A320 Simulator • To shutdown the simulator and it associated systems. • Presentations 1hr
Power ON/OFF • To power ON the Simulator and it associated systems. • Instructor led
& • To be able to follow the safety precautions. • Interactive
Safety measures • To identify the safety measures associated with 7000xr sims.
Practical • To locate the S1, S2 & SV1cabinet also the components involved. • Console room 4 hr
exercises • To locate on board and off board systems and components. • Hands-on
• To do a cold start to the sim following the safety precautions. 7000xr SIM
• To practice the remote login using various utilities. • Interactive
• Practice invoking various utilities in opserver.
• To locate the safety items associated with 7000xr sims.
• Perform a daily site inspection
02 7000 XR Node • To learn the architecture of CAE schematics and architecture of the nodes • Presentations 30min
architecture also the side reference designations of nodes with naming convention. • Instructor led
& IGEL • To understand the IGEL architecture with its back up and restore.
ARCHITECTURE
Simulator • To monitor the simulator status using the OneUI utility and to interpret • Presentations 2hr
Diagnostic the results • Instructor led
system • To understand the significance of OneUI utility and to interpret the status • Interactive
of simulator.
• To understand WINDOWS SERVICES during OpServer start.
Instructor • To define the architecture and main component of IOS. • Presentations 1hr
operating system • To follow the procedure of calibration of IOS. • Instructor led
• Interactive
 Backup & restore • To understand the node backup and restore procedure via Microsoft • Presentations 30min.
deployment tool. • Instructor led
• To understand the node backup and restore procedure via WINDOWS • Interactive
SERVER BACKUP UTILITY.
Practical • Exercise a backup and restore of Opserver using windows server backup • Console room 4 hr
exercises utility. • Hands-on
• To identify the status symbols of simulator using Diagnostic Viewer utility. 7000xr SIM
• Monitor the IOS node and Calibrate and manual linearization of screens • Interactive
using related utilities.
• Identify the nodes and practice a locate nodes using node schematics
understand the required steps required when replacing a computer node.
03 7000 XR Windows 2008 • To use basic Windows administration commands to • Presentations 2hr
Server manage/monitor the OpServer • Instructor led
• Interactive
Network cisco • To understand about Cisco Ethernet Switch models, Identifying IP address • Presentations 2hr
switches for Switches using web Interface • Instructor led
• To learn the procedure Backup and restore of cisco switches. • Interactive
Practical • To familiarize with Windows 2008 features and administrative tools. • Console room 4 hr
exercises • The objective of the exercise is the following • Hands-on
1) Get familiar with the Web UI 7000xr SIM
2) Backup the Cisco Switch • Interactive
3) Restore a Cisco switch
7000 XR INTRODUCTION • To understand Simulation Interfacing concepts. • Presentations 2hr
04 TO MPIC • To know Interface Systems Architecture and its major components • Instructor led
INTERFACE • To get familiarized with Interface panels power and requirements. • Interactive
MPIC CHASSIS • To get familiarized with Interface chassis and respective location. • Presentations 2hr
• To have basic understanding of Chassis View and Power specifications. • Instructor led
• To understand 28 Volt Power Supply operation, its Settings and 400 Hz • Interactive
Distribution.
• To get familiarized with MPIC cards its types.
• To understand Interface Manager GUI, ONEUI Interface manager Panel
View, ONEUI Interface manager Chassis View, analog Instruments, MPIC
Remove replace Setup MPIC system initialization; MPIC plug and play and
Instrument calibration.
Practical • Using the system schematics be able to identify a panel location and • Console room 4hr
exercises identify the standard analog IOs and their functions. • Hands-on
• Identify the MPIC cards and daughter cards associated to a given panel 7000xr SIM
and current MPIC software installed. • Interactive
 • Identify the CDB label associated to a given IO.
• Familiarize oneself with the Interface manager tool.
• The objective of the exercise is the following Replace an MPIC also
practice analog calibration.
05 7000 XR DB Manager • To update and validate the Databases using DB manager utility. • Presentations 1 hr
utility • To enter data base from IOS. • Instructor led
• to install and load a new navigation database using • Interactive
the DB Manager Client and IOS Validation Page.

SOFTWARE • To understand overview of distributed software architecture. • Presentations 2 hr

BASIC • To understand the exchange of Simulation Between Nodes and • Instructor led
OPERATION connection via VNC. • Interactive
• To have basic understanding of LAUNCH PAD, Basic Simulation Variables
Monitoring, CTS-PLUS, Simulation process on node and configuration
manipulation.
Radio station • the participants will be able to Update the navigation database, Perform • Presentations 1hr
utilities visual runway alignments, Tune Pushbacks. • Instructor led
Practical • Create a new customer using DB manager utility. • Console room 4 hr
exercises • Practice a data base update using DB manager utility. • Hands-on
• Practice application of utilities related to radio aids. 7000xr SIM
• Monitor variables using CTS-PLUS. • Interactive
• Create a New Simulator Load Option and Copy and Rename a
Configuration.
7000 XR AUDIO System • To understand COMMS hardware & software configuration for 7000XR • Presentations 2hr
06 series sims. • Instructor led
• To know the techniques of saving and restoring the backup DIGIGRAM. • Interactive
Characteristics of network troubleshooting, testing and replacement of
COMMS associated systems.

P1-Power • To understand the Block diagram of power distribution • Presentations 2hr

• Able to identify the major components of power Distribution • Instructor led
• Able to understand the working of major Power distribution Components • Interactive
• To understand and Operate controls and interpret the related error
messages
• To identify safety risks to personnel or equipment and ensure protection.
 Practical • To practice Audio testing and Setup. • Console room 4hr
exercises • To practice a procedure of saving and restoring back of Digigram. • Hands-on
• The objective of the exercise is to identify the components in the P1 7000xr SIM
cabinet and get familiar with the documentation. • Interactive
• To locate the major component using schematics.
07 7000 XR SOUND System • To understand SOUND system hardware & software configuration for • Presentations 2 hr
7000XR series sims. • Instructor led
• To know the techniques of saving and restoring the backup of amplifier. • Interactive
Characteristics of network troubleshooting, testing and replacement of
sound associated systems
Flight control • To know about Control Loading System, Electric Load Unit assembly and • Presentations 2hr
system concept of force-friction compensation. • Instructor led
• To understand the Significance of Load Unit mechanical linkages and • Interactive
Flight control mechanical stops setup.
• To know the process of Dynamic LU position calibration and also to know
concept of “EtherCAT” module setup (address).
• To know the procedure of Encoder’s Backup Power Battery Replacement.
Practical • To practice testing and Setup of crown amplifier channel. • Console room 4 hr
exercises • To practice a procedure of saving and restoring back of amplifier. • Hands-on
• Identify and locate the control loading and their types. 7000xr SIM
• Verify and calibrate the force offset and the mechanical friction of a flight • Interactive
control having a dynamic load unit and Save the changes made to the
control loading calibration files, enter the files in the applicable simulator
software load.
08 Motion Introduction • To know about the objective of the course. • Presentations 15min.
Gen2 EMM • Brief description about the course. • Instructor led
• Interactive
Motion System • To know about Aircraft motion cues. • Presentations 1hr 45min
Concepts and • To understand the SIX-DEGREE of freedom motion system. • Instructor led
block diagram • To know the Major Elements of motion system. • Interactive
• To have understanding of full control over MOOG NEW GENERATION
GUI.
ELECTRO- • To Identify Actuator Assemblies and components associated with the • Presentations 2hrs
MECHANICAL actuator, Understand Commutation and Components associated with • Instructor led
ACTUATOR Commutation. • Interactive
(EMA) • To Understand why we need to adjust the Home Offset after an Actuator
Replacement also to Identify the connections and cabling to the actuator
• Understand potential faults related to an encoder Failure to Understand
Maintenance Items associated with the Actuator.
 Practical • Identify the major Motion Base components and systems • EMM room 4hrs
Exercises • Accessing the Moog Simulation Software GUI • Hands-on
• Understanding the Task Menu Screens 7000xr SIM
• Understanding the Footer Control Screens • Interactive
• Understanding the Tool Buttons Screens
• Collecting Log Files, Recorder Files, Configuration Files.
• Identify the safety components
• Perform a Motion Base shutdown and start-up
• Demonstrate Connecting to the Cabinet via a Maintenance Laptop
• Observe an Engage and Disengage
09 Motion ELECTRO- • Understand the Motion System modes of operation (Normal Mode, Class • Presentations 3hr
Gen2 EMM MECHANICAL 1 Fault, Class 2 Fault) to Identify LRUs involved with Normal/Class 1 • Instructor led
ACTUATOR Operation • Interactive
(EMA) • Identify LRUs involved with Class2 Fault Operation
• Understand the difference between Regen and Dynamic Brake Resistors
• Understand the Different types of PLC inputs
• Understand the COM rates between devices/components in the Motion
System.
• Understand how to navigate through the Motion Cabinet Schematics
• Understand Interface Connections to the Cabinet for Home Switch.
• understand Differences between External and Internal Interlocks
• to have a basic idea about Bridge Connections
Drawbridge • To have an Introduction of Drawbridge Components, Flight Compartment • Presentations 1hr
Components, Motion Cabinet Components and Diagnostic Tools. • Instructor led
• Interactive
Practical • Observe a Class 2 Fault. • EMM room 4hr
Exercises • The objective of the exercise is the following • Hands-on
• Engaging and Disengaging the Motion System 7000xr SIM
• Understanding of how to use the Moog Schematics • Interactive
• Locate components in cabinet by description
• Identify component EPLAN ID and then locate in cabinet
10 VISUAL Introduction • Introduction to Image Generation System, Projection System, Image • Presentations 30min
SYSTEM Calibration System and Peripheral System of visual system. • Instructor led
Basic • To understand the basic visual configuration and the interface • Presentations 1hr 30min
Configuration architecture. • Instructor led
• To learn the start up and shut down procedure for Visual system and • Interactive
various components associated with it.
• To understand the application of Remote UI utility.
 Image • To have the overview of the visual nodes and node replacement • Presentations
Generation procedure. • Instructor led
System • To understand Image Generation – Naming and Addressing conventions. 2hr
• Interactive
• To learn the maintenance and troubleshooting aspect of visual system.
• To familiarised with the Software Organization of various nodes
associated with visual system.
• To learn the Configuration Management via IG main UI on control station
and element update procedure.
Practical • To locate the major component involved in visual system at SV1 cabinet • Console room 4hr
Exercises as well on the SIM. • Hands-on
• Practice a complete visual shut down and start-up procedure. 7000xr SIM
• Exercise a file, data base and element update using IG MainUI following • Interactive
Configuration Management.

11 VISUAL Projection • To have overview of integrity of BARCO projector and major components • Presentations 1 hr
SYSTEM system involve in projection system. • Instructor led
• To understand the block diagram of visual system integrity. • Interactive
• To learn the various aspects of maintenance and troubleshooting involve
in visual system.
Digital Display • Introduction of DDAT and its various applications in maintaining the • Presentations 2hr
Alignment Tool visual system. • Instructor led
DDAT • To learn the application of ACE clutter.
Display • To have a basic understanding of the visual peripheral system and their • Presentations 1hr
Périphérie role in visual system. • Instructor led
System • To learn the various aspect of checking a visual data base. • Interactive
Practical • To practice a projector, change and practice a golden alignment following • Console room 4hrs
Exercises the user manual. • Hands-on
• To practice any snag rectification exercise as instructed by instructor. 7000xr SIM
• Interactive
12 PREVENTIVE • Introduction to preventive maintenance. • Presentations 01HRS
MAINTENANCE • Get familiarized with maintenance plans and their due periods. • Instructor led
TASKS • To understand the documentation related to PMT’S. • Interactive
• Record book
WEEKLY PMT • To understand the approach of doing weekly PMT. • Console room 07 HRS
MONTHLY PMT • To understand the approach of doing monthly PMT. • Hands-on 5000
QUATERLY PMT • To understand the approach of doing quarterly PMT. R4 SIMULATOR
(PRACTICAL) • Interactive
13 HALFYEARLY • To understand the approach of doing halfyearly PMT. • Console room 06HRS
PMT • To understand the approach of doing yearly PMT. • Hands-on 5000
YEARLY PMT R4 SIMULATOR
(PRACTICAL) • Interactive
DAY SIMULATOR MODULE TITLE SESSION OBJECTIVE METHODOLOGY DURATION
01 APT IPT • To know about the course and expectation of participants from the course. • Interactive 4 HRS
• Brief description about the course.
• To know the hardware and software integrity of the APT system.
• To get familiarized with APT interface system and LCD system and related
troubleshooting aspects.
• To get familiarized with application of IPT Panel explorer also the cold start
procedure.
• To get familiarized with IOS station and various utility involve.
• To understand the procedure of updating the nav database, radio aids and
editing option file.
• To get familiarized with the Preventive maintenance aspects of APT.
PRACTICAL • Identify the components of APT and practice a cold start. • 4 HRS
• Practice an IOS calibration procedure following the IPT user manual.
• Practice updating the nav database, radio aids and editing option file.
• Following appropriate task cards perform the preventive maintenance tasks.
02 QTG INTRODUCTION • Brief description about the course. • 2HRS
& • To understand regulations and significance of MQTG.
Verification and • Introduction to autograph utility and its application.
validations. • Familiarization with various type of QTG’s, their significance and their
setups.
• To understand tips and tricks to review various types qtg’s.
QTG eQTG • Introduction to eQTG and its application. • 1HRS
PRACTICAL • To run various qtg’s following the QTG plan also tips and tricks to be • 4 HRS.
EXERCIZE followed for various qtg’s.
• To verify the qtg’s ran and process of their validation.
• Practice eQTG utility and its application.
03- COMPUTER AIRBUS 320 • APPLICATION BASED. • E-LEARNING. 80HRS.
12 BASED SYSTEM COURSE
TRAINING
(CBT)