Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    Shaft Generator Specification

    Uploaded by

    กัปตัน นเรศ สิงห์สอาด
    SHAFT GENERATOR

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd

    Shaft Generator Specification

    Uploaded by

    กัปตัน นเรศ สิงห์สอาด
    53 views1 page
    SHAFT GENERATOR

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    SHAFT GENERATOR

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd
    Download as pdf
    53 views1 page

    Shaft Generator Specification

    Uploaded by

    กัปตัน นเรศ สิงห์สอาด
    SHAFT GENERATOR

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd
    Download as pdf
    of 1
    $P006212 -276 SPECIFICATION 1. MODEL SGAY220U-108 TYPE STEP-UP GEAR WITH OMEGA CLUTCH 2. IMPORTANT PARTICULARS ENGINE HORSE POWER/REY. MAN BEM 6S46NC = 7860 KN x 129 min™ STEP-UP GEAR RATIO GENERATOR : LOW: 13. 43, HIGH: 11. 71 INPUT SHAFT + OUTPUT SHAFT ROTATION DIRECTION CLOCKWISE (FORWARD ROTATION), CLOCKWISE (SEEING FROM STERN SIDE) COUNTER CLOCKWISE (REVERSE ROTATION), STOP (NOT USE) RATING OF GENERATOR 500 KH X 1200 min-* 1 UNIT (USE ONLY AT FORWARD ROTATION) OPERATION SPEED M/E LOW RANGE : 95~112.5 min~’ | HIGH RANGE: 111.5~129 mine FLUCTUATION IN PARALLEL RUNNING MAX. 5% (SAME AS 0/6) GENERATOR ROTATION S/G OPERATION 0% (CONST. ) INSTANTANEOUS FLUCTUATION WAX, 10% ol. EQUIVALENT SAE 30 HD APPROX. 600 Lit (OIL TANK CAPACITY) 3. SPARE PARTS AND TOOL. 1) SPARE PARTS EACH ONE SET OF SPARE PARTS AS NICO STANDARDS AND NK RULES. 2) SPECIAL SPARE PARTS = BEARING KIT 3) TOOL © ONE SET OF SPECIAL TOOLS ESSENTIAL TO DISASSEMBLE AND ASSEMBLE THE UNIT. 4. INSPECTION NK RULE (SPARE PARTS ARE PROVIDED FOR THE NEARBY SEAS OPERATION) PAINTING MUNSELL WARK 2.5 G 7/2 6. WARRANTY ALL OF THE DEFECTS OCCURRED WITHIN TWELVE (12) MONTHS FROM THE SHIP DELIVERY OR TWENTY-FOUR. (24) MONTHS AFTER GEAR BOX DELIVERY. WHICHEVER COMES EARLIER, DUE TO MAKER'S DEFECTS IN WORKMANSHIP AND MATERTAL, SHALL BE REPAIRED AND/OR REPLACED, 7... SCOPE OF MANUFACTURE | sureLie By ay} - No) 1 Tew CONTENT PER INSTALLED unit | nico | s/v | etc. | ow 1] INPUT RATO COUPLING FOR MAIN ENGINE 1 © < twin Fel COUPLING | TYPE RATO-S 63927-2300 INPUT COUPING (FOR S/6 SIDE) 1}/o 8/6 BODY COUPLING BOLTS (FOR $/6 SIDE) 1seT © — Twin Fel 2 | output GEAR COUPLING FOR GENERATOR 1set | © $/6 BODY COUPLING | TYPE uSsSOL WORKING OF GENERATOR $1DE 1 cen (PREPARED HOLE $103, MAX ¢ 160) 3] INSTALLATION | JACK BOLTS set | 0 | INSTALLATION BOLT, CHOCK LINER ° 4 | O1L PUMP FOR OMEGA CLUTCH (S/6 OMEGA DRIVE) 1/0 8/6 BODY CATWE: 5] 6.7 m/n X 1.8 Me (CONST. ) 129 min" | FOR LUBE. OIL (S/@ INPUT SIDE DRIVE) | 1 | © ” 8.8 m/hX 0.5 MPa (WLTI TYPE) FOR LUBE. O1L (MOTOR DRIVE) 2/0 HULL 20.0 m'/h X 0.85 NPa (CONST. ) (ACA4OV. 60H2._ 7. 5KH) ile

    You might also like