SABO READYMADE EARTHING KIT

Since - 1997
MODEL No.: SABO-REK

Due to increase in electronics & our dependency on the same, it is must to safegaurd our equipments from getting faulty due
to fault currents & avoid risk of human life due to electric shocks. Keeping above in mind as well as ease of transportation,
good & cost effective earthing solution, we have developed “SABO READYMADE EARTHING KIT”

Specifications : Installation procedure:

1. Robust packing of size 1250mm long & 85mm dia 1. Dig a bore of 100mm dia & 1.2m deep.
consisting of: 2. Pour 5 litres of water inside the pit & 20 litres of water
a. Copper bonded rod over soil surrounding the pit. (For rocky / sandy soil this
b. Backfill compound gel step is not required in rocky / sandy soil pour
c. Brase clamp for connecting rod to strip/cable compound directly in the pit & hammer the rod in
2. Maintenance free earthing solution center).
3. Highly efficient for small loads 3. Make paste of 2 kg compound after mixing 2 litres of
4. Easy to carry, weight 8kg water. Mixing of compound with water should be made
5. Eco friendly thoroughly by hand or stick till it takes form of
5.Suitable for all type of soil / terrains and climatic homogenous paste or say till 5 minutes.
conditions. 4. Now pour this paste inside the pit.
Applications : 5. Insert rod at the centre of pit & hammer it so that some
part should move inside the ground & rod gets grip.
1. Equipment body earth 6. Now fill the hole with the remaining compound paste
2. Domestic earthing after mixing with water in the same procedure.
3. Solar panel earthing,solar water pumps street lights etc 7. Connect equipment and rod through wire / cable / strip /
4. Suitable for load upto 5KVA clamp fitted at the top of the rod.
8. Cover earth pit from FRP earth pit cover.

www.saboindia.com
 Readymade Earthing Kit

Since - 1997

Specification Installation procedure:

1. Robust packing consist of : 1. Dig a bore of 100-150mm dia & 1.2m deep
a. 17.2mm 4' long copper bonded rod-SCBR17204 2. Pour 5 litres of water inside the kit & 20 litres of water in
b. 5kg backfill compound soil surrounding the kit.(for rocky soil this step is not
c. Clamp for connecting rod to strip / cable required).
2. Maintenance free earthing solution 3. Make paste of 2 kg compound after mixing 5 litres of
3. Highly efficient water. Mixing of compound with water should be made
4. Easy to carry thoroughly by hand or stick till it take form of
5. Suitable for all type of soil / terrains and climatic homogenous paste or say till 5 minutes.
conditions. 4. Now pour this paste inside the pit.
Application 5. Insert electrode / rod at the centre of pit & hammer it so
1. Equipment body earth that some part should move inside the ground &
2. Domestic earthing electrode gets grip.
3. Solar panel earthing 6. Now fill the hole with the remaining compound paste
4. Suitable for load upto 5KVA, for larger capacity loads, after mixing with water in the same procedure.
multiple earthing should be done in parallel 7. Connect equipment and earthing through wire / cable /
strip / clamp fitted at the top of the electrode.

SABO SYSTEMS PVT. LTD. Official Distributor / Dealer:

(ISO 9001 : 2008 Certified)
Banarsi Complex, Opp. SBI Bank Nishatganj, Nishatganj,
Faizabad Road, Lucknow (U.P.) - 226006 (INDIA)
Tele : +91 522 4077769, whatsapp: +91 9415002845
info@saboindia.com, info@saboearth.com
Website - www.saboindia.com, www.saboearth.com
 Readymade Earthing Kit

Since - 1997

Specification Installation procedure:

1. Robust packing consist of : 1. Dig a bore of 100-150mm dia & 1.2m deep
a. 17.2mm 4' long copper bonded rod-SCBR17204 2. Pour 5 litres of water inside the kit & 20 litres of water in
b. 5kg backfill compound soil surrounding the kit.(for rocky soil this step is not
c. Clamp for connecting rod to strip / cable required).
2. Maintenance free earthing solution 3. Make paste of 2 kg compound after mixing 5 litres of
3. Highly efficient water. Mixing of compound with water should be made
4. Easy to carry thoroughly by hand or stick till it take form of
5. Suitable for all type of soil / terrains and climatic homogenous paste or say till 5 minutes.
conditions. 4. Now pour this paste inside the pit.
Application 5. Insert electrode / rod at the centre of pit & hammer it so
1. Equipment body earth that some part should move inside the ground &
2. Domestic earthing electrode gets grip.
3. Solar panel earthing 6. Now fill the hole with the remaining compound paste
4. Suitable for load upto 5KVA, for larger capacity loads, after mixing with water in the same procedure.
multiple earthing should be done in parallel 7. Connect equipment and earthing through wire / cable /
strip / clamp fitted at the top of the electrode.

SABO SYSTEMS PVT. LTD. Official Distributor / Dealer:

(ISO 9001 : 2008 Certified)
Banarsi Complex, Opp. SBI Bank Nishatganj, Nishatganj,
Faizabad Road, Lucknow (U.P.) - 226006 (INDIA)
Tele : +91 522 4077769, whatsapp: +91 9415002845
info@saboindia.com, info@saboearth.com
Website - www.saboindia.com, www.saboearth.com
 Readymade Earthing Kit

Since - 1997

Specification Installation procedure:

1. Robust packing consist of : 1. Dig a bore of 100-150mm dia & 1.2m deep
a. 17.2mm 4' long copper bonded rod-SCBR17204 2. Pour 5 litres of water inside the kit & 20 litres of water in
b. 5kg backfill compound soil surrounding the kit.(for rocky soil this step is not
c. Clamp for connecting rod to strip / cable required).
2. Maintenance free earthing solution 3. Make paste of 2 kg compound after mixing 5 litres of
3. Highly efficient water. Mixing of compound with water should be made
4. Easy to carry thoroughly by hand or stick till it take form of
5. Suitable for all type of soil / terrains and climatic homogenous paste or say till 5 minutes.
conditions. 4. Now pour this paste inside the pit.
Application 5. Insert electrode / rod at the centre of pit & hammer it so
1. Equipment body earth that some part should move inside the ground &
2. Domestic earthing electrode gets grip.
3. Solar panel earthing 6. Now fill the hole with the remaining compound paste
4. Suitable for load upto 5KVA, for larger capacity loads, after mixing with water in the same procedure.
multiple earthing should be done in parallel 7. Connect equipment and earthing through wire / cable /
strip / clamp fitted at the top of the electrode.

SABO SYSTEMS PVT. LTD. Official Distributor / Dealer:

(ISO 9001 : 2008 Certified)
Banarsi Complex, Opp. SBI Bank Nishatganj, Nishatganj,
Faizabad Road, Lucknow (U.P.) - 226006 (INDIA)
Tele : +91 522 4077769, whatsapp: +91 9415002845
info@saboindia.com, info@saboearth.com
Website - www.saboindia.com, www.saboearth.com