Technical

Specification

Flygt 3127, 50Hz

 Table of Contents

Table of Contents
C-pump, Standard Motor......................................................................................................................2
Product description.............................................................................................................................2
Motor rating and performance curves..............................................................................................4

D-pump...................................................................................................................................................8
Product description.............................................................................................................................8
Motor rating and performance curves...........................................................................................10

F-pump, Standard Motor....................................................................................................................13

Product description..........................................................................................................................13
Motor rating and performance curves 3127.181/.090.................................................................16
Motor rating and performance curves 3127.350/.390.................................................................16

H-pump.................................................................................................................................................20
Product description..........................................................................................................................20
Motor rating and performance curves...........................................................................................22

L-pump..................................................................................................................................................24
Product description..........................................................................................................................24
Motor rating and performance curves...........................................................................................26

M-pump.................................................................................................................................................28
Product description..........................................................................................................................28
Motor rating and performance curves...........................................................................................30

N-pump, Standard Motor...................................................................................................................32

Product description..........................................................................................................................32
Motor rating and performance curves...........................................................................................34

P-pump..................................................................................................................................................39
Product description..........................................................................................................................39
Motor rating and performance curves...........................................................................................41

Dimensions and Weight......................................................................................................................42

Drawings, C-pump............................................................................................................................42
Drawings, D-pump............................................................................................................................49
Drawings, F-pump.............................................................................................................................50
Drawings, H-pump............................................................................................................................54
Drawings, L-pump.............................................................................................................................55
Drawings, M-pump...........................................................................................................................56
Drawings, N-pump............................................................................................................................56
Drawings, P-pump.............................................................................................................................63

Flygt 3127, 50Hz Technical Specification 1

C-pump, Standard Motor

C-pump, Standard Motor

Product description
Usage
Submersible pump for pumping clean water, surface water and waste water containing
solids or fibred material.
Denomination
Type Non explosion proof Explosion proof Pressure class Installation types
version version
Standard 3127.181 3127.090 • LT — Low head P, S, T, Z
• MT — Medium
head
• HT — High head

The pump can be used in the following installations:

P Semi permanent, wet well arrangement with pump installed on two guide bars with
automatic connection to discharge.
S Portable semi permanent, wet well arrangement with hose coupling or flange for
connection to discharge pipeline.
T Vertical permanent, dry well arrangement with flange connection to suction and
discharge piping.
Z Horizontal permanent, dry well arrangement with flange connection to suction and
discharge piping.
Application Limits
Feature Description

Liquid temperature Maximum 40°C, (104°F)

Liquid temperature, warm water version Maximum 70°C, (158°F)

Depth of immersion Maximum 20 m (65 ft)

pH of the pumped liquid 5.5 – 14

Liquid density Maximum 1100 kg/m3

Motor data
Feature Description

Motor type Squirrel-cage induction motor

Frequency 50 Hz

Power supply 3-phase

Starting method • Direct on-line

• Star-delta
Number of starts per hour Maximum 30

Code compliance IEC 60034-1

2 Flygt 3127, 50Hz Technical Specification

 C-pump, Standard Motor

Feature Description

Rated output variation ±10%

Voltage variation • Continuously running: Maximum ±5%

• Intermittent running: Maximum ±10%
Voltage imbalance Maximum 2%
between phases

Insulation class H (180°C, 356°F)

Cables
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 4G2.5 mm2

cable 4G2.5+2×1.5 mm2
4G4 mm2
4G4+2×1.5 mm2

Y/D start SUBCAB® heavy-duty submersible 7G2.5 mm2

cable 7G2.5+2×1.5 mm2
7G4 mm2
7G4+2×1.5 mm2

NSSHÖU../3E+St 3x2.5+3x2.5/3E+3x1.5 St

Monitoring Equipment
Thermal contacts opening temperature 125° C (257° F)
Materials
Denomination Material ASTM EN
Major castings Cast iron, gray 35B GJL-250
Pump housing Cast iron, gray 35B GJL-250
Impeller, alternative 1 Cast iron, gray 35B GJL-250
Impeller, alternative 2 Cast iron, gray 30B GJL-200
Impeller, alternative 3 Cast iron, Hard-Iron™ A 532 IIIA GJN-HB555(XCR23)
Suction cover, alternative Cast iron, gray 30B GJL-200
1
Suction cover, alternative Nitrile rubber (NBR) – –
2
Wear ring, alternative 1 Nitrile rubber (NBR) – –
Wear ring, alternative 2 Bronze C924 CC491K, CC492K
Lifting handle Stainless steel AISI 316L 1.4404,1.4432, …
Shaft Stainless steel AISI 431 1.4057+QT800
Screws and nuts Stainless steel, A4 AISI 316L, 316, 316Ti 1.4401,1.4404, …
O-rings, alternative 1 Nitrile rubber (NBR) 70° – –
IRH
O-rings, alternative 2 Fluorinated rubber (FPM) – –
70° IRH

Flygt 3127, 50Hz Technical Specification 3

C-pump, Standard Motor

Denomination Material ASTM EN

Oil, part no 901752 Medical white oil of paraffin – –
type. Fulfills FDA 172.878
(a)

Table 1: Mechanical face seals

Alternative Inner seal Outer seal

1 Aluminum oxide/ Corrosion resistant Corrosion resistant cemented
cemented carbide carbide/ Corrosion resistant
cemented carbide
2 Corrosion resistant cemented Corrosion resistant cemented
carbide/ Corrosion resistant carbide/ Corrosion resistant
cemented carbide cemented carbide
3 Corrosion resistant cemented Silicon carbide/ Silicon carbide
carbide/ Corrosion resistant
cemented carbide

Surface Treatment
Priming Finish

Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.

Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories.
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables.

Motor rating and performance curves

Star-delta starting current is 1/3 of Direct on-line starting current.

4 Flygt 3127, 50Hz Technical Specification

 C-pump, Standard Motor

LT

WS005061A

Table 2: 400 V, 50 Hz, 3–phase

Rated Rated Curve/ Revolution Rated Starting Power Impeller Installation

power kW power hp Impeller s per current, A current, A factor, cos throughlet,
No minute, φ mm
rpm
4 5.4 412 1465 9.4 73 .74 76 T,Z
4 5.4 442 1465 9.4 73 .74 100 T,Z
4.7 6.3 411 1445 9.6 56 .86 76 P,S
4.7 6.3 412 1445 9.6 56 .86 76 P,S
4.7 6.3 442 1445 9.6 56 .86 100 P,S
4.7 6.3 411 1460 10 73 .78 76 P,S
4.7 6.3 412 1460 10 73 .78 76 P,S
4.7 6.3 442 1460 10 73 .78 100 P,S
4.7 6.3 411 1460 11 76 .76 76 T,Z
4.7 6.3 412 1460 11 76 .76 76 T,Z
4.7 6.3 442 1460 11 76 .76 100 T,Z
5.9 7.9 410 1450 12 77 .84 76 P,S
5.9 7.9 411 1450 12 77 .84 76 P,S
5.9 7.9 412 1450 12 77 .84 76 P,S
5.9 7.9 441 1450 12 77 .84 107 P,S
5.9 7.9 442 1450 12 77 .84 100 P,S

Flygt 3127, 50Hz Technical Specification 5

C-pump, Standard Motor

MT

WS005062A

Table 3: 400 V, 50 Hz, 3–phase

Rated Rated Curve/ Revolution Rated Starting Power Impeller Installation

power kW power hp Impeller s per current, A current, A factor, cos throughlet,
No minute, φ mm
rpm
4 5.4 432 1455 8.3 56 .84 87 T,Z
4 5.4 433 1455 8.3 56 .84 82 T,Z
4 5.4 434 1455 8.3 56 .84 87 T,Z
4.7 6.3 431 1445 9.6 56 .86 90 P,S
4.7 6.3 432 1445 9.6 56 .86 87 P,S
4.7 6.3 433 1445 9.6 56 .86 82 P,S
4.7 6.3 434 1445 9.6 56 .86 87 P,S
4.7 6.3 431 1460 11 76 .76 90 T,Z
4.7 6.3 432 1460 11 76 .76 87 T,Z
4.7 6.3 433 1460 11 76 .76 82 T,Z
4.7 6.3 434 1460 11 76 .76 87 T,Z
5.9 7.9 430 1450 12 77 .84 100 P,S
5.9 7.9 431 1450 12 77 .84 90 P,S
5.9 7.9 432 1450 12 77 .84 87 P,S
5.9 7.9 433 1450 12 77 .84 82 P,S
5.9 7.9 434 1450 12 77 .84 87 P,S

6 Flygt 3127, 50Hz Technical Specification

 C-pump, Standard Motor

HT

WS005063A

Table 4: 400 V, 50 Hz, 3–phase

Rated Rated Curve/ Revolution Rated Starting Power Impeller Installation

power kW power hp Impeller s per current, A current, A factor, cos throughlet,
No minute, φ mm
rpm
4 5.4 483 1465 9.4 73 .74 76 T,Z
4 5.4 484 1465 9.4 73 .74 76 T,Z
4 5.4 485 1465 9.4 73 .74 76 T,Z
4.7 6.3 483 1445 9.6 56 .86 76 P,S
4.7 6.3 484 1445 9.6 56 .86 76 P,S
4.7 6.3 485 1445 9.6 56 .86 76 P,S
4.7 6.3 483 1460 11 76 .76 76 T,Z
4.7 6.3 484 1460 11 76 .76 76 T,Z
4.7 6.3 485 1460 11 76 .76 76 T,Z
5.9 7.9 480 1450 12 77 .84 76 P,S
5.9 7.9 481 1450 12 77 .84 76 P,S
5.9 7.9 483 1450 12 77 .84 76 P,S
5.9 7.9 484 1450 12 77 .84 76 P,S
5.9 7.9 485 1450 12 77 .84 76 P,S
7.4 9.9 250 2900 14 114 .91 – P,S

Flygt 3127, 50Hz Technical Specification 7

D-pump

D-pump
Product description
Usage
Submersible pump for pumping liquids containing solids, abrasive media or low volumes
at high heads.
Denomination
Type Non explosion proof Explosion proof Pressure class Installation types
version version
Standard 3127.181 3127.090 • MT — Medium P
head
• HT — High head

The pump can be used in the following installations:

P Semi permanent, wet well arrangement with pump installed on two guide bars with
automatic connection to discharge.
Application Limits
Feature Description

Liquid temperature Maximum 40°C, (104°F)

Liquid temperature, warm water version Maximum 70°C, (158°F)

Depth of immersion Maximum 20 m (65 ft)

pH of the pumped liquid 5.5 – 14

Liquid density Maximum 1100 kg/m3

Motor data
Feature Description

Motor type Squirrel-cage induction motor

Frequency 50 Hz

Power supply 3-phase

Starting method • Direct on-line

• Star-delta
Number of starts per hour Maximum 30

Code compliance IEC 60034-1

Rated output variation ±10%

Voltage variation • Continuously running: Maximum ±5%

• Intermittent running: Maximum ±10%
Voltage imbalance Maximum 2%
between phases

Insulation class H (180°C, 356°F)

8 Flygt 3127, 50Hz Technical Specification

 D-pump

Cables
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 4G2.5 mm2

cable 4G2.5+2×1.5 mm2
4G4 mm2
4G4+2×1.5 mm2

Y/D start SUBCAB® heavy-duty submersible 7G2.5 mm2

cable 7G2.5+2×1.5 mm2
7G4+2×1.5 mm2

NSSHÖU../3E+St 3x2.5+3x2.5/3E+3x1.5 St

Monitoring Equipment
Thermal contacts opening temperature 125° C (257° F)
Materials
Denomination Material ASTM EN
Major castings Cast iron, gray 35B GJL-250
Pump housing, Cast iron, gray 35B GJL-250
alternative 1
Pump housing, Cast iron, gray 35B GJL-250
alternative 2
Impeller, alternative 1 Cast iron, gray 35B GJL-250
Impeller, alternative 2 Cast iron, gray 35B GJL-250
Impeller, alternative 3 Cast iron, gray 30B GJL-200
Lifting handle Stainless steel AISI 316L 1.4404,1.4432, …
Shaft Stainless steel AISI 431 1.4057+QT800
Screws and nuts Stainless steel, A4 AISI 316L, 316, 316Ti 1.4401,1.4404, …
O-rings, alternative 1 Nitrile rubber (NBR) 70°
IRH
O-rings, alternative 2 Fluorinated rubber (FPM)
70° IRH
Oil, part no 901752 Medical white oil of paraffin
type. Fulfills FDA 172.878
(a)

Table 5: Mechanical face seals

Alternative Inner seal Outer seal

1 Aluminum oxide/ Corrosion resistant Corrosion resistant cemented
cemented carbide carbide/ Corrosion resistant
cemented carbide
2 Corrosion resistant cemented Corrosion resistant cemented
carbide/ Corrosion resistant carbide/ Corrosion resistant
cemented carbide cemented carbide
3 Corrosion resistant cemented Silicon carbide/ Silicon carbide
carbide/ Corrosion resistant
cemented carbide

Flygt 3127, 50Hz Technical Specification 9

D-pump

Surface Treatment
Priming Finish

Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.

Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories.
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables.

Motor rating and performance curves

Star-delta starting current is 1/3 of Direct on-line starting current.

10 Flygt 3127, 50Hz Technical Specification

 D-pump

MT

WS005081A

Table 6: 400 V, 50 Hz, 3–phase

Rated Rated Curve/ Revolution Rated Starting Power Impeller Installation

power kW power hp Impeller s per current, A current, A factor, cos throughlet,
No minute, φ mm
rpm
4.7 6.3 401 1460 10 73 .78 100 P
4.7 6.3 471 1460 10 73 .78 100 P
4.7 6.3 472 1460 10 73 .78 100 P
5.9 7.9 400 1450 12 77 .84 100 P
5.9 7.9 401 1450 12 77 .84 100 P
5.9 7.9 470 1450 12 77 .84 100 P
5.9 7.9 471 1450 12 77 .84 100 P
5.9 7.9 472 1450 12 77 .84 100 P

Flygt 3127, 50Hz Technical Specification 11

D-pump

HT

WS005082A

Table 7: 400 V, 50 Hz, 3–phase

Rated Rated Curve/ Revolution Rated Starting Power Impeller Installation

power kW power hp Impeller s per current, A current, A factor, cos throughlet,
No minute, φ mm
rpm
7.4 9.9 205 2920 15 137 .84 76 P
7.4 9.9 206 2920 15 137 .84 76 P
7.4 9.9 207 2920 15 137 .84 76 P
7.4 9.9 275 2920 15 137 .84 76 P
7.4 9.9 276 2920 15 137 .84 76 P
7.4 9.9 277 2920 15 137 .84 76 P

12 Flygt 3127, 50Hz Technical Specification

 F-pump, Standard Motor

F-pump, Standard Motor

Product description
Usage 3127.181/.090
Submersible pump for pumping liquid manure, or heavily contaminated sewage and
sludge. The impeller is S-shaped and fitted with a cutting device and a break pin to protect
the pump.
Usage 3127.350/.390
Submersible chopper pump for pumping liquid manure, or heavily contaminated sewage
and sludge. The hydraulic end has a cutting function.
Denomination
Type Non explosion proof Explosion proof Installation types Installation types
version version

Cast iron 3127.181 3127.090 • LT — Low head J, P, S

Hard-Iron™ 3127.350 3127.390 • MT — Medium P, S, T, Z

head
• HT — High head
• SH — Super head

The pump can be used in the following installations:

J Semi permanent, wet well arrangement with guide bars or wire for a pump with a jet
nozzle intended for mixing. For connection to a discharge stool. Jet nozzle can also be
used as a hose connection.
P Semi permanent, wet well arrangement with pump installed on two guide bars with
automatic connection to discharge.
S Portable semi permanent, wet well arrangement with hose coupling or flange for
connection to discharge pipeline.
T Vertical permanent, dry well arrangement with flange connection to suction and
discharge piping.
Z Horizontal permanent, dry well arrangement with flange connection to suction and
discharge piping.
Application Limits
Feature Description

Liquid temperature Maximum 40°C, (104°F)

Liquid temperature, warm water version Maximum 70°C, (158°F)

Depth of immersion Maximum 20 m (65 ft)

pH of the pumped liquid 5.5 – 14

Liquid density Maximum 1100 kg/m3

Motor data
Feature Description

Motor type Squirrel-cage induction motor

Flygt 3127, 50Hz Technical Specification 13

F-pump, Standard Motor

Feature Description

Frequency 50 Hz

Power supply 3-phase

Starting method • Direct on-line

• Star-delta
Number of starts per hour Maximum 30

Code compliance IEC 60034-1

Rated output variation ±10%

Voltage variation • Continuously running: Maximum ±5%

• Intermittent running: Maximum ±10%
Voltage imbalance Maximum 2%
between phases

Insulation class H (180°C, 356°F)

Cables 3127.181/.090
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 4G2.5 mm2

cable 4G2.5+2×1.5 mm2
4G4 mm2
4G4+2×1.5 mm2

Y/D start SUBCAB® heavy-duty submersible 7G2.5 mm2

cable 7G2.5+2×1.5 mm2
7G4+2×1.5 mm2

NSSHÖU../3E+St 3x2.5+3x2.5/3E+3x1.5 St

Cables 3127.350/.390
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 4G2.5 mm2

cable 4G4 mm2
4G4+2×1.5 mm2
4G6+2×1.5 mm2
4G10+2×1.5 mm2

Y/D start SUBCAB® heavy-duty submersible 7G2.5 mm2

cable 7G2.5+2×1.5 mm2
7G4+2×1.5 mm2

Screened SUBCAB® heavy-duty S3×2.5 mm2

submersible cable S3×2.5+3×2.5/3+4×1.5 mm2
S6×2.5+2×1.5 mm2

Monitoring Equipment
Thermal contacts opening temperature 125° C (257° F)

14 Flygt 3127, 50Hz Technical Specification

 F-pump, Standard Motor

Materials
Denomination Material ASTM EN
Major castings Cast iron, gray 35B GJL-250
Pump housing Cast iron, gray 35B GJL-250
Impeller, alternative 1 Cast iron, nodular GJS-400-18-LT
Impeller, alternative 2 Cast iron, Hard-Iron™ A 532 IIIA GJN-HB555(XCR23)
Suction cover, alternative Cast iron, Hard-Iron™ A 532 IIIA GJN-HB555(XCR23)
1
Suction cover, alternative Steel A 572 GR50 S355
2
Suction cover, alternative Cast iron, Hard-Iron™ A 532 IIIA GJN-HB555(XCR23)
3
Lifting handle Stainless steel AISI 316L 1.4404,1.4432, …
Shaft Stainless steel AISI 431 1.4057+QT800
Screws and nuts Stainless steel, A4 AISI 316L, 316, 316Ti 1.4401,1.4404, …
O-rings, alternative 1 Nitrile rubber (NBR) 70°
IRH
O-rings, alternative 2 Fluorinated rubber (FPM)
70° IRH
Oil, part no 901752 Medical white oil of paraffin
type. Fulfills FDA 172.878
(a)

Table 8: Mechanical face seals

Alternative Inner seal Outer seal

1 Aluminum oxide/ Corrosion resistant Corrosion resistant cemented
cemented carbide carbide/ Corrosion resistant
cemented carbide
2 Corrosion resistant cemented Corrosion resistant cemented
carbide/ Corrosion resistant carbide/ Corrosion resistant
cemented carbide cemented carbide
3 Corrosion resistant cemented Silicon carbide/ Silicon carbide
carbide/ Corrosion resistant
cemented carbide

Surface Treatment
Priming Finish

Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.

Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables

Flygt 3127, 50Hz Technical Specification 15

F-pump, Standard Motor

Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories.
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables.

Motor rating and performance curves 3127.181/.090

Star-delta starting current is 1/3 of Direct on-line starting current.
LT

WS005069A

Table 9: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
4.7 6.3 491 1460 10 73 .78 P,S
4.7 6.3 492 1460 10 73 .78 P,S
5.9 7.9 490 1450 12 77 .84 J,P,S
5.9 7.9 491 1450 12 77 .84 P,S
5.9 7.9 492 1450 12 77 .84 P,S
5.9 7.9 493 1450 12 77 .84 P,S

Motor rating and performance curves 3127.350/.390

Star-delta starting current is 1/3 of Direct on-line starting current.

16 Flygt 3127, 50Hz Technical Specification

 F-pump, Standard Motor

MT
P2 [kW]

7
6 427
437
5
428
4 438
429
3 439

H [m]

MT
20

16

12

427
437
4 428
429 438
439

0
0 10 20 30 40 50 60
Q [l/s]
WS005083A

Table 10: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
4 5.4 429 1455 8.3 56 .84 T,Z
4 5.4 439 1455 8.3 56 .84 T,Z
4.7 6.3 428 1445 9.6 56 .86 P,S
4.7 6.3 429 1445 9.6 56 .86 P,S
4.7 6.3 438 1445 9.6 56 .86 P,S
4.7 6.3 439 1445 9.6 56 .86 P,S
5.9 7.9 427 1440 12 62 .88 P,S
5.9 7.9 427 1450 13 76 .81 P,S
5.9 7.9 437 1440 12 62 .88 P,S
5.9 7.9 437 1450 13 76 .81 P,S

Flygt 3127, 50Hz Technical Specification 17

F-pump, Standard Motor

HT
P2 [kW]

7
477
6 487

5 478
488
4
479
3 489

H [m]

HT
20

16

12
477
487

4 478
479 488
489

0
0 10 20 30 40 50 60
Q [l/s]
WS005084A

Table 11: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
4 5.4 479 1455 8.3 56 .84 T,Z
4 5.4 489 1455 8.3 56 .84 T,Z
4.7 6.3 478 1445 9.6 56 .86 P,S
4.7 6.3 479 1445 9.6 56 .86 P,S
4.7 6.3 488 1445 9.6 56 .86 P,S
4.7 6.3 489 1445 9.6 56 .86 P,S
5.9 7.9 477 1440 12 62 .88 P,S
5.9 7.9 477 1450 13 76 .81 P,S
5.9 7.9 486 1440 12 62 .88 P,S
5.9 7.9 486 1450 13 76 .81 P,S
5.9 7.9 487 1440 12 62 .88 P,S
5.9 7.9 487 1450 13 76 .81 P,S

18 Flygt 3127, 50Hz Technical Specification

 F-pump, Standard Motor

SH
P 2 [kW]

8
7 241 / 246
6
242 / 247
5
4 243
243 /248

3 243
24 4/24 9

H [m]

SH
35

30

25

20

15

10 241 / 246
242 / 247
243
243 /248
5
243
24 4/24 9

0
0 5 10 15 20 25 30
Q [l/s]
WS005085A

Table 12: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
7.4 9.9 241 2900 14 114 .91 P,S
7.4 9.9 242 2900 14 114 .91 P,S
7.4 9.9 243 2900 14 114 .91 P,S
7.4 9.9 244 2900 14 114 .91 P,S
7.4 9.9 246 2900 14 114 .91 P,S
7.4 9.9 247 2900 14 114 .91 P,S
7.4 9.9 248 2900 14 114 .91 P,S
7.4 9.9 249 2900 14 114 .91 P,S

Flygt 3127, 50Hz Technical Specification 19

H-pump

H-pump
Product description
Usage
Submersible pump for pumping water containing abrasive particles, sludge, ground water,
slurries.
Denomination
Type Non explosion proof Explosion proof Pressure class Installation
version version types

Cast iron 3127.181 3127.090 HT — High head S

The pump can be used in the following installations:

S Portable semi permanent, wet well arrangement with hose coupling or flange for
connection to discharge pipeline.
Application Limits
Feature Description

Liquid temperature Maximum 40°C, (104°F)

Liquid temperature, warm water version Maximum 70°C, (158°F)

Depth of immersion Maximum 20 m (65 ft)

pH of the pumped liquid 5.5 – 14

Liquid density Maximum 1100 kg/m3

Motor data
Feature Description

Motor type Squirrel-cage induction motor

Frequency 50 Hz

Power supply 3-phase

Starting method • Direct on-line

• Star-delta
Number of starts per hour Maximum 30

Code compliance IEC 60034-1

Rated output variation ±10%

Voltage variation • Continuously running: Maximum ±5%

• Intermittent running: Maximum ±10%
Voltage imbalance Maximum 2%
between phases

Insulation class H (180°C, 356°F)

20 Flygt 3127, 50Hz Technical Specification

 H-pump

Cables
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 4G2.5 mm2

cable 4G2.5+2×1.5 mm2
4G4 mm2
4G4+2×1.5 mm2

Y/D start SUBCAB® heavy-duty submersible 7G2.5 mm2

cable 7G2.5+2×1.5 mm2
7G4+2×1.5 mm2

Monitoring Equipment
• Thermal contacts opening temperature 125° C (257° F)
Materials
Denomination Material ASTM EN
Major castings Cast iron, gray 35B GJL-250
Pump housing Cast iron, gray 35B GJL-250
Impeller Cast iron, Hard-Iron™ A 532 IIIA GJN-HB555(XCR23)
Suction cover Nitrile rubber (NBR) – –
Wear ring Nitrile rubber (NBR) – –
Lifting handle Stainless steel AISI 316L 1.4404,1.4432, …
Shaft Stainless steel AISI 431 1.4057+QT800
Screws and nuts Stainless steel, A4 AISI 316L, 316, 316Ti 1.4401,1.4404, …
O-rings, alternative 1 Nitrile rubber (NBR) 70° – –
IRH
O-rings, alternative 2 Fluorinated rubber (FPM) – –
70° IRH
Oil Part No 901752 Medical white oil of paraffin – –
type. Fulfills FDA 172.878
(a)

Table 13: Mechanical face seals

Alternative Inner seal Outer seal

1 Aluminum oxide/ Corrosion resistant Corrosion resistant cemented
cemented carbide carbide/ Corrosion resistant
cemented carbide
2 Corrosion resistant cemented Corrosion resistant cemented
carbide/ Corrosion resistant carbide/ Corrosion resistant
cemented carbide cemented carbide
3 Corrosion resistant cemented Silicon carbide/ Silicon carbide
carbide/ Corrosion resistant
cemented carbide

Flygt 3127, 50Hz Technical Specification 21

H-pump

Surface Treatment
Priming Finish

Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.

Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories.
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables.
For more information, see separate booklet or our website.

Motor rating and performance curves

Star-delta starting current is 1/3 of Direct on-line starting current.

22 Flygt 3127, 50Hz Technical Specification

 H-pump

HT
P 2 [kW]

5
466

3 468

H [m]

HT
20

16

12

4
466
468

0
0 5 10 15 20 25 30 35 40
Q [l/s]
WS005075A

Table 14: 400 V, 50 Hz, 3–phase

Rated Rated Curve/ Revolution Rated Starting Power Impeller Installation

power kW power hp Impeller s per current, A current, A factor, cos throughlet,
No minute, φ mm
rpm
4.7 6.3 466 1460 10 73 .78 51 S
4.7 6.3 468 1460 10 73 .78 50 S
5.9 7.9 466 1450 12 77 .84 51 S
5.9 7.9 468 1450 12 77 .84 50 S

Flygt 3127, 50Hz Technical Specification 23

L-pump

L-pump
Product description
Usage
Submersible pump for pumping clean, surface or waste water containing fibre-free solids.
Denomination
Type Non explosion proof Explosion proof Pressure class Installation
version version types

Cast iron 3127.181 — LT — Low head L

The pump can be used in the following installations:

L Semi permanent, wet well column pipe arrangement where the well is divided into a
suction part and a discharge part. Pump end equipped with guide vanes.
Application Limits
Feature Description

Liquid temperature Maximum 40°C, (104°F)

Liquid temperature, warm water version Maximum 70°C, (158°F)

Depth of immersion Maximum 20 m (65 ft)

pH of the pumped liquid 5.5 – 14

Liquid density Maximum 1100 kg/m3

Motor data
Feature Description

Motor type Squirrel-cage induction motor

Frequency 50 Hz

Power supply 3-phase

Starting method • Direct on-line

• Star-delta
Number of starts per hour Maximum 30

Code compliance IEC 60034-1

Rated output variation ±10%

Voltage variation • Continuously running: Maximum ±5%

• Intermittent running: Maximum ±10%
Voltage imbalance Maximum 2%
between phases

Insulation class H (180°C, 356°F)

24 Flygt 3127, 50Hz Technical Specification

 L-pump

Cables
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 4G2.5 mm2

cable 4G2.5+2×1.5 mm2
4G4 mm2
4G4+2×1.5 mm2

Y/D start SUBCAB® heavy-duty submersible 7G2.5 mm2

cable 7G2.5+2×1.5 mm2
7G4 mm2
7G4+2×1.5 mm2

Monitoring Equipment
• Thermal contacts opening temperature 125° C (257° F)
Materials
Denomination Material ASTM EN
Major castings Cast iron, gray 35B GJL-250
Pump housing Cast iron, gray 35B GJL-250
Impeller Cast iron, gray 35B GJL-250
Insert ring Cast iron, gray 35B GJL-250
Lifting handle Stainless steel AISI 316L 1.4404,1.4432, …
Shaft Stainless steel AISI 431 1.4057+QT800
Screws and nuts Stainless steel, A4 AISI 316L, 316, 316Ti 1.4401,1.4404, …
O-rings, alternative 1 Nitrile rubber (NBR) 70°
IRH
O-rings, alternative 2 Fluorinated rubber (FPM)
70° IRH
Oil Part No 901752 Medical white oil of paraffin
type. Fulfills FDA 172.878
(a)

Table 15: Mechanical face seals

Alternative Inner seal Outer seal

1 Aluminum oxide/ Corrosion resistant Corrosion resistant cemented
cemented carbide carbide/ Corrosion resistant
cemented carbide
2 Corrosion resistant cemented Corrosion resistant cemented
carbide/ Corrosion resistant carbide/ Corrosion resistant
cemented carbide cemented carbide
3 Corrosion resistant cemented Silicon carbide/ Silicon carbide
carbide/ Corrosion resistant
cemented carbide

Flygt 3127, 50Hz Technical Specification 25

L-pump

Surface Treatment
Priming Finish

Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.

Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories.
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables.
For more information, see separate booklet or our website.

Motor rating and performance curves

Star-delta starting current is 1/3 of Direct on-line starting current.

26 Flygt 3127, 50Hz Technical Specification

 L-pump

LT

WS005073A

Table 16: 400 V, 50 Hz, 3–phase

Rated Rated Curve/ Revolution Rated Starting Power Impeller Installation

power kW power hp Impeller s per current, A current, A factor, cos throughlet,
No minute, φ mm
rpm
4.7 6.3 411 1445 9.6 56 .86 76 L
5.9 7.9 410 1450 12 77 .84 76 L
5.9 7.9 411 1450 12 77 .84 76 L
7.5 10.1 410 1435 15 77 .86 76 L
7.5 10.1 411 1435 15 77 .86 76 L

Flygt 3127, 50Hz Technical Specification 27

M-pump

M-pump
Product description
Usage
Submersible pump for pumping waste water containing solids that need to be macerated.
The impeller is equipped with a grinder device.
Denomination
Type Non explosion proof Explosion proof Pressure class Installation types
version version
Grinder 3127.170 3127.890 LT — Low head F, P
HT — High head

The pump can be used in the following installations:

F Free standing semi permanent, wet well arrangement where the pump is placed on a
firm surface.
P Semi permanent, wet well arrangement with pump installed on two guide bars with
automatic connection to discharge.
Application Limits
Feature Description

Liquid temperature Maximum 40°C, (104°F)

Liquid temperature, warm water version Maximum 70°C, (158°F)

Depth of immersion Maximum 20 m (65 ft)

pH of the pumped liquid 5.5 – 14

Liquid density Maximum 1100 kg/m3

Motor data
Feature Description

Motor type Squirrel-cage induction motor

Frequency 50 Hz

Power supply 3-phase

Starting method • Direct on-line

• Star-delta
Number of starts per hour Maximum 30

Code compliance IEC 60034-1

Rated output variation ±10%

Voltage variation • Continuously running: Maximum ±5%

• Intermittent running: Maximum ±10%
Voltage imbalance Maximum 2%
between phases

28 Flygt 3127, 50Hz Technical Specification

 M-pump

Feature Description

Insulation class H (180°C, 356°F)

Cables
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 4G2.5 mm2

cable 4G2.5+2×1.5 mm2
4G4 mm2
4G4+2×1.5 mm2

Y/D start SUBCAB® heavy-duty submersible 7G2.5 mm2

cable 7G2.5+2×1.5 mm2
7G4+2×1.5 mm2

Monitoring Equipment
Thermal contacts opening temperature 125° C (257° F)
Materials
Denomination Material ASTM EN
Major castings Cast iron, gray 35B GJL-250
Pump housing Cast iron, gray 35B GJL-250
Impeller, alternative 1 Cast iron, gray 30B GJL-200
Impeller, alternative 2 Cast iron, gray 35B GJL-250
Cutter wheel Cast iron, Hard-Iron™ A 532 IIIA GJN-HB555(XCR23)
Cutter plate Stainless steel
Lifting handle Stainless steel AISI 316L 1.4404,1.4432, …
Shaft Stainless steel AISI 431 1.4057+QT800
Screws and nuts Stainless steel, A4 AISI 316L, 316, 316Ti 1.4401,1.4404, …
O-rings Nitrile rubber (NBR) 70°
IRH
Oil, part no 901752 Medical white oil of paraffin
type. Fulfills FDA 172.878
(a)

Table 17: Mechanical face seals

Inner seal Outer seal

Aluminum oxide/ Corrosion resistant cemented carbide Corrosion resistant cemented carbide/ Corrosion resistant
cemented carbide

Surface Treatment
Priming Finish

Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.

Options
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)

Flygt 3127, 50Hz Technical Specification 29

M-pump

• Surface treatment (Epoxy)

• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories.
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables.

Motor rating and performance curves

Star-delta starting current is 1/3 of Direct on-line starting current.
LT

WS005070A

Table 18: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
7.4 9.9 210 2900 14 114 .91 F,P

30 Flygt 3127, 50Hz Technical Specification

 M-pump

HT
P 2 [kW]

10 255

8
252

H [m]

HT
60

50

40

252
30

20 255

10

0
0 1 2 3 4 5 6
Q [l/s]
WS005071A

Table 19: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
7.4 9.9 252 2900 14 114 .91 F,P
10.9 14.6 255 2875 21 137 .88 F,P

Flygt 3127, 50Hz Technical Specification 31

N-pump, Standard Motor

N-pump, Standard Motor

Product description
Usage
The submersible pump is designed for pumping clean water, surface water, and
wastewater containing solids or long-fibred material.
Denomination
Type Non explosion proof Explosion proof Pressure class Installation types
version version
Adaptive 3127.160 3127.190 LT — Low head P, S, T, Z
Cast iron 3127.181 3127.090 MT — Medium head L, P, S, T, Z
HT — High head
Hard-Iron™ 3127.185 3127.095 SH — Super head P, S, T, Z

The pump can be used in the following installations:

L Semi permanent, wet well column pipe arrangement where the well is divided into a
suction part and a discharge part. Pump end equipped with guide vanes.
P Semi permanent, wet well arrangement with pump installed on two guide bars with
automatic connection to discharge.
S Portable semi permanent, wet well arrangement with hose coupling or flange for
connection to discharge pipeline.
T Vertical permanent, dry well arrangement with flange connection to suction and
discharge piping.
Z Horizontal permanent, dry well arrangement with flange connection to suction and
discharge piping.
Application Limits
Feature Description

Liquid temperature Maximum 40°C, (104°F)

Liquid temperature, warm water version Maximum 70°C, (158°F)

Depth of immersion Maximum 20 m (65 ft)

pH of the pumped liquid 5.5 – 14

Liquid density Maximum 1100 kg/m3

Motor data
Feature Description

Motor type Squirrel-cage induction motor

Frequency 50 Hz

Power supply 3-phase

Starting method • Direct on-line

• Star-delta
Number of starts per hour Maximum 30

32 Flygt 3127, 50Hz Technical Specification

 N-pump, Standard Motor

Feature Description

Code compliance IEC 60034-1

Rated output variation ±10%

Voltage variation • Continuously running: Maximum ±5%

• Intermittent running: Maximum ±10%
Voltage imbalance Maximum 2%
between phases

Insulation class H (180°C, 356°F)

Cables
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 4G2.5 mm2

cable 4G2.5+2×1.5 mm2
4G4 mm2
4G4+2×1.5 mm2

Y/D start SUBCAB® heavy-duty submersible 7G2.5 mm2

cable 7G2.5+2×1.5 mm2
7G4+2×1.5 mm2

Screened SUBCAB® heavy-duty S3×2.5+3×2.5/3+4×1.5 mm2

submersible cable

Monitoring Equipment
Thermal contacts opening temperature 125° C (257° F)
Materials
Denomination Material ASTM EN
Major castings Cast iron, gray 35B GJL-250
Pump housing Cast iron, gray 35B GJL-250
Impeller, alternative 1 Cast iron, gray 35B GJL-250
Impeller, alternative 2 Cast iron, Hard-Iron™ A 532 IIIA GJN-HB555(XCR23)
Insert ring, alternative 1 Cast iron, gray 35B GJL-250
Insert ring, alternative 2 Cast iron, Hard-Iron™ A 532 IIIA GJN-HB555(XCR23)
Lifting handle Stainless steel AISI 316L 1.4404,1.4432, …
Shaft Stainless steel AISI 431 1.4057+QT800
Screws and nuts Stainless steel, A4 AISI 316L, 316, 316Ti 1.4401,1.4404, …
O-rings, alternative 1 Nitrile rubber (NBR) 70° – –
IRH
O-rings, alternative 2 Fluorinated rubber (FPM) – –
70° IRH

Flygt 3127, 50Hz Technical Specification 33

N-pump, Standard Motor

Denomination Material ASTM EN

Oil, part no 901752 Medical white oil of paraffin – –
type. Fulfills FDA 172.878
(a)

Table 20: Mechanical face seals

Alternative Inner seal Outer seal

1 Aluminum oxide/ Corrosion resistant Corrosion resistant cemented
cemented carbide carbide/ Corrosion resistant
cemented carbide
2 Corrosion resistant cemented Corrosion resistant cemented
carbide/ Corrosion resistant carbide/ Corrosion resistant
cemented carbide cemented carbide
3 Corrosion resistant cemented Silicon carbide/ Silicon carbide
carbide/ Corrosion resistant
cemented carbide

Surface Treatment
Priming Finish

Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.

Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories.
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables.

Motor rating and performance curves

Star-delta starting current is 1/3 of Direct on-line starting current.

34 Flygt 3127, 50Hz Technical Specification

 N-pump, Standard Motor

LT
P2 [kW]

5 420

4
421
3
422

H [m]

LT
16

14

12

10

2 421
420

422

0
0 10 20 30 40 50 60 70 80 90
Q [l/s]
WS005053A

Table 21: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
4 5.4 421 1455 8.3 56 .84 T,Z
4 5.4 422 1455 8.3 56 .84 T,Z
4.7 6.3 421 1445 9.6 56 .86 P,S
4.7 6.3 422 1445 9.6 56 .86 P,S
4.7 6.3 421 1460 11 76 .76 T,Z
4.7 6.3 422 1460 11 76 .76 T,Z
5.9 7.9 420 1450 12 77 .84 P,S
5.9 7.9 421 1450 12 77 .84 P,S
5.9 7.9 422 1450 12 77 .84 P,S

Flygt 3127, 50Hz Technical Specification 35

N-pump, Standard Motor

MT
P2 [kW]

6
437

4 438

439
3

H [m]

MT
16

14

12

10

437
4
438
2 439

0
0 10 20 30 40 50 60 70 80
Q [l/s]
WS005054A

Table 22: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
4 5.4 438 1455 8.3 56 .84 T,Z
4 5.4 439 1455 8.3 56 .84 T,Z
4.7 6.3 438 1445 9.6 56 .86 P,S
4.7 6.3 439 1445 9.6 56 .86 P,S
4.7 6.3 438 1460 11 76 .76 T,Z
4.7 6.3 439 1460 11 76 .76 T,Z
5.9 7.9 437 1450 13 76 .81 P,S
5.9 7.9 438 1450 13 76 .81 P,S
5.9 7.9 439 1450 13 76 .81 P,S

36 Flygt 3127, 50Hz Technical Specification

 N-pump, Standard Motor

HT
P2 [kW]

6 486 487

488
4
489

0
H [m]

HT
25

20 486

15

487
10

5 488

489

0
0 10 20 30 40 50
Q [l/s]
WS005055A

Table 23: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
4 5.4 489 1455 8.3 56 .84 T,Z
4.7 6.3 487 1445 9.6 56 .86 P,S
4.7 6.3 488 1445 9.6 56 .86 P,S
4.7 6.3 489 1445 9.6 56 .86 P,S
4.7 6.3 487 1460 11 76 .76 T,Z
4.7 6.3 488 1460 11 76 .76 T,Z
4.7 6.3 489 1460 11 76 .76 T,Z
5.9 7.9 486 1450 12 77 .84 P,S
5.9 7.9 487 1450 12 77 .84 P,S
5.9 7.9 488 1450 12 77 .84 P,S
5.9 7.9 489 1450 12 77 .84 P,S

Flygt 3127, 50Hz Technical Specification 37

N-pump, Standard Motor

SH
P2 [kW]
245
246
7
6 247

5
248
4
249
3

H [m]

SH
40

35
245

30

25

20

15
246
247
10
248
249
5

0
0 5 10 15 20 25
Q [l/s]

WS005056A

Table 24: 400 V, 50 Hz, 3–phase

Rated power Rated power Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
7.4 9.9 245 2900 14 114 .91 P,S
7.4 9.9 246 2900 14 114 .91 P,S
7.4 9.9 247 2900 14 114 .91 P,S
7.4 9.9 248 2900 14 114 .91 P,S
7.4 9.9 249 2900 14 114 .91 P,S

38 Flygt 3127, 50Hz Technical Specification

 P-pump

P-pump
Product description
Usage
Submersible pump intended for pumping clean and slightly contaminated water.
Denomination
Type Non explosion proof Explosion proof Pressure class Installation
version version types

Cast iron 3127.181 3127.090 LT — Low head L

The pump can be used in the following installations:

L Semi permanent, wet well column pipe arrangement where the well is divided into a
suction part and a discharge part. Pump end equipped with guide vanes.
Application Limits
Feature Description

Liquid temperature Maximum 40°C, (104°F)

Liquid temperature, warm water version Maximum 70°C, (158°F)

Depth of immersion Maximum 20 m (65 ft)

pH of the pumped liquid 5.5 – 14

Liquid density Maximum 1100 kg/m3

Motor data
Feature Description

Motor type Squirrel-cage induction motor

Frequency 50 Hz

Power supply 3-phase

Starting method • Direct on-line

• Star-delta
Number of starts per hour Maximum 30

Code compliance IEC 60034-1

Rated output variation ±10%

Voltage variation • Continuously running: Maximum ±5%

• Intermittent running: Maximum ±10%
Voltage imbalance Maximum 2%
between phases

Insulation class H (180°C, 356°F)

Flygt 3127, 50Hz Technical Specification 39

P-pump

Cables
Application Type Denomination

Direct-on-line start SUBCAB® heavy-duty submersible 7G2.5+2×1.5 mm2

cable

Y/D start SUBCAB® heavy-duty submersible 7G2.5+2×1.5 mm2

cable

Monitoring Equipment
• Thermal contacts opening temperature 125° C (257° F)
Materials
Denomination Material ASTM EN
Major castings Cast iron, gray 35B GJL-250
Pump housing Cast iron, gray 35B GJL-250
Propeller Alumimum bronze C 95 500 CC333G
Lifting handle Stainless steel AISI 316L 1.4404,1.4432, …
Shaft Stainless steel AISI 431 1.4057+QT800
Screws and nuts Stainless steel, A4 AISI 316L, 316, 316Ti 1.4401,1.4404, …
O-rings, alternative 1 Nitrile rubber (NBR) 70°
IRH
O-rings, alternative 2 Fluorinated rubber (FPM)
70° IRH
Oil Part No 901752 Medical white oil of paraffin
type. Fulfills FDA 172.878
(a)

Table 25: Mechanical face seals

Alternative Inner seal Outer seal

1 Aluminum oxide/ Corrosion resistant Corrosion resistant cemented
cemented carbide carbide/ Corrosion resistant
cemented carbide
2 Corrosion resistant cemented Corrosion resistant cemented
carbide/ Corrosion resistant carbide/ Corrosion resistant
cemented carbide cemented carbide
3 Corrosion resistant cemented Silicon carbide/ Silicon carbide
carbide/ Corrosion resistant
cemented carbide

Surface Treatment
Priming Finish

Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.

Options
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)

40 Flygt 3127, 50Hz Technical Specification

 P-pump

• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories.
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables.
For more information, see separate booklet or our website.

Motor rating and performance curves

Star-delta starting current is 1/3 of Direct on-line starting current.
LT

WS005072A

Table 26: 400 V, 50 Hz, 3–phase

Rated Rated Curve/ Blade Revolution Rated Starting Power Installation

power, kW power, hp Impeller angle, ° s per current, A current, A factor, cos
No minute, φ
rpm
7.5 10.1 494 16 1435 15 77 .86 L

Flygt 3127, 50Hz Technical Specification 41

Dimensions and Weight

Dimensions and Weight

Drawings, C-pump
All drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).
Contact your sales representative for more information.
All dimensions are in mm.

Figure 1: LT, P-installation Figure 2: LT, P-installation

42 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 3: LT, P-installation Figure 4: LT, S-installation

Figure 5: LT, S-installation Figure 6: LT, T-installation

Flygt 3127, 50Hz Technical Specification 43

Dimensions and Weight

Figure 7: LT, Z-installation Figure 8: MT, P-installation

Figure 9: MT, P-installation Figure 10: MT, P-installation

44 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 11: MT, S-installation Figure 12: MT, S-installation

Figure 13: MT, T-installation Figure 14: MT, T-installation

Flygt 3127, 50Hz Technical Specification 45

Dimensions and Weight

Figure 15: MT, Z-installation Figure 16: MT, Z-installation

Figure 17: HT, P-installation Figure 18: HT, P-installation

46 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 19: HT, P-installation Figure 20: HT/SH, P-installation

Figure 21: HT, S-installation Figure 22: HT, S-installation

Flygt 3127, 50Hz Technical Specification 47

Dimensions and Weight

Figure 23: HT/SH, S-installation Figure 24: HT, T-installation

Figure 25: HT, T-installation Figure 26: HT, Z-installation

48 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 27: HT, Z-installation

Drawings, D-pump
All drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).
Contact your sales representative for more information.
All dimensions are in mm.

Figure 28: MT, P-installation Figure 29: HT, P-installation

Flygt 3127, 50Hz Technical Specification 49

Dimensions and Weight

Figure 30: HT, P-installation

Drawings, F-pump
All drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).
Contact your sales representative for more information.
All dimensions are in mm.

Figure 31: LT, J-installation Figure 32: LT, P-installation

50 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 33: LT, P-installation Figure 34: LT, S-installation

Figure 35: MT, P-installation Figure 36: MT, P-installation

Flygt 3127, 50Hz Technical Specification 51

Dimensions and Weight

Figure 37: MT, S-installation Figure 38: MT, S-installation

Figure 39: MT, T-installation Figure 40: MT, T-installation

52 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 41: MT, Z-installation Figure 42: MT, Z-installation

Figure 43: HT, P-installation Figure 44: HT, S-installation

Flygt 3127, 50Hz Technical Specification 53

Dimensions and Weight

Figure 45: HT, T-installation Figure 46: HT, Z-installation

Figure 47: SH, P-installation Figure 48: SH, S-installation

Drawings, H-pump
All drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).
Contact your sales representative for more information.
All dimensions are in mm.

54 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 49: HT, S-installation

Drawings, L-pump
All drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).
Contact your sales representative for more information.
All dimensions are in mm.

Figure 50: LT, L-installation

Flygt 3127, 50Hz Technical Specification 55

Dimensions and Weight

Drawings, M-pump
All drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).
Contact your sales representative for more information.
All dimensions are in mm.

Figure 51: LT/HT, F-installation Figure 52: LT/HT, P-installation

Drawings, N-pump
All drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).
Contact your sales representative for more information.
All dimensions are in mm.

56 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 53: LT, L-installation Figure 54: LT, P-installation

Figure 55: LT, P-installation Figure 56: LT, S-installation

Flygt 3127, 50Hz Technical Specification 57

Dimensions and Weight

Figure 57: LT, S-installation Figure 58: LT, T-installation

Figure 59: LT, T-installation Figure 60: LT, Z-installation

58 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 61: LT, Z-installation Figure 62: MT, P-installation

Figure 63: MT, P-installation Figure 64: MT, P-installation

Flygt 3127, 50Hz Technical Specification 59

Dimensions and Weight

Figure 65: MT, P-installation Figure 66: MT, S-installation

Figure 67: MT, S-installation Figure 68: MT, S-installation

60 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 69: MT, T-installation Figure 70: MT, T-installation

Figure 71: MT, Z-installation Figure 72: MT, Z-installation

Flygt 3127, 50Hz Technical Specification 61

Dimensions and Weight

Figure 73: HT, P-installation Figure 74: HT, S-installation

Figure 75: HT, T-installation Figure 76: HT, Z-installation

62 Flygt 3127, 50Hz Technical Specification

 Dimensions and Weight

Figure 77: SH, P-installation Figure 78: SH, S-installation

Drawings, P-pump
All drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).
Contact your sales representative for more information.
All dimensions are in mm.

Figure 79: LT, L-installation

Flygt 3127, 50Hz Technical Specification 63

Xylem |’zīləm|
1) The tissue in plants that brings water upward from the roots
2) A leading global water technology company

We're 12,500 people unified in a common purpose: creating

innovative solutions to meet our world's water needs. Developing new
technologies that will improve the way water is used, conserved, and
re-used in the future is central to our work. We move, treat, analyze,
and return water to the environment, and we help people use water
efficiently, in their homes, buildings, factories and farms. In more than
150 countries, we have strong, long-standing relationships with
customers who know us for our powerful combination of leading
product brands and applications expertise, backed by a legacy of
innovation.

For more information on how Xylem can help you, go to xyleminc.com

Xylem Water Solutions AB Visit our Web site for the latest version of this
document and more information
Gesällvägen 33
174 87 Sundbyberg The original instruction is in English. All non-
English instructions are translations of the original
Sweden instruction.
Tel. +46-8-475 60 00 © 2012 Xylem Inc.
Fax +46-8-475 69 00
http://tpi.xyleminc.com

883452_1.0_en.US_2012-04_TS_3127_50Hz