Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Upgrade Guide PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

2009 Samsung TV

F/W Upgrade Guide

Samsung Electronics
¾ Model List

LCD TV

. LB360 series : LN19B360C5D, LN22B360C5D, LN22B360C8D,


LN26B360C5D, LN32B360C5D
. LB361 series : LN19B361C5D
. LB460 series : LN22B460B2D, LN26B460B2D, LN32B460B2D
. LB530 series : LN32B530P7F, LN32B530P7N, LN37B530P7F
LN40B530P7F, LN40B530P7N, LN46B530P7F
LN46B530P7N, LN52B530P7F
. LB540 series : LN32B540P8D, LN40B540P8F, LN46B540P8F
LN52B540P8F
. LB550 series : LN32B550K1F, LN37B550K1F, LN40B550K1F
LN46B550K1F, LN52B550K1F
. LB650 series : LN19B650T6D, LN22B650T6D

PDP TV

. PB430 series : PN42B430P2D, PN50B430P2D


. PB450 series : PN42B450B1D, PN50B450B1D
. PB530 series : PN50B530S2F, PN58B530S2F
. PB540 series : PN50B540S3F, PN58B540S3F
. PB550 series : PN50B550T2F, PN58B550T2F, PN63B550T2F
. PB560 series : PN50B560T5F, PN58B560T5F
Step1. How to prepare the USB Memory Drive

1. Save the firmware file into your computer.


File Name : 2009 DTV S4 firmware.exe

2. Connect the USB Memory Drive


to the USB port of your PC.
Copy the file into the USB Memory Drive.

3. Go to the USB Memory Drive and then double click the file.

4. Click on the “Unzip” button. 5. Unzipping is in progress.

6. After completing, click on the 7. Two folders containing the firmware files
“OK” and “Close” buttons. have been added to the USB memory drive.
One is “T-STL3FAUSHC” and
the other is “T-STL5PAUSFC”

8. Safely disconnect the USB memory drive


OK by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
9. Turn your TV on, and then insert
the USB Memory Drive containing
the firmware into the USB port
on the rear of the TV

10. Press the MENU button to display


11. Press the ▲ or ▼ button to select
the menu. Press the ▲ or ▼ button
“Software Upgrade”, then press the
to select “Support”, then press the
ENTER button.
ENTER button

12. The message “Scanning for USB. 13. Then, the message “Upgrade
It may take up to 30 seconds” Version XXXX to version XXXX?
is displayed. The system will be reset after
upgrade.” is displayed.
Select “Yes”, then press the ENTER
button.

※ Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has a lower version
number than the version on your TV, do not install it.
※ Do not pull the USB drive out or
unplug the power cable until
complete

14. When the software upgrade is


complete; the TV will turn off and
then back on by itself.
Proceed with the ‘Plug & Play’
setup.

15. Once ‘Plug & Play’ is complete;


“Enjoy your watching.” is displayed.
Press the ‘Enter’ key and you are
done.

※ Important
If the firmware version you downloaded from the Samsung website
or received from Samsung is older than or has a lower version
number than the version on your TV, do not install it.

You might also like