Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
197 views

Sigmashield 880

SigmaShield 880 is a two-component polyamine epoxy coating designed for severe marine and offshore environments. It provides long-term protection in a single coat at dry film thicknesses of 200-1000 microns. SigmaShield 880 has outstanding water and abrasion resistance, application tolerance on damp surfaces, and continues to cure when immersed in water. Case studies demonstrate its use in protecting pier ring beams, wharf fender frames, jetty fenders, water pipes, and structural steel in marine and offshore applications.

Uploaded by

Anonymous YggO6T6Gz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
197 views

Sigmashield 880

SigmaShield 880 is a two-component polyamine epoxy coating designed for severe marine and offshore environments. It provides long-term protection in a single coat at dry film thicknesses of 200-1000 microns. SigmaShield 880 has outstanding water and abrasion resistance, application tolerance on damp surfaces, and continues to cure when immersed in water. Case studies demonstrate its use in protecting pier ring beams, wharf fender frames, jetty fenders, water pipes, and structural steel in marine and offshore applications.

Uploaded by

Anonymous YggO6T6Gz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

February 2017

Novel Protective Coating Systems

SIGMA SHIELD 880


SigmaShield 880

OFFSHORE PETROCHEMICAL MINING OTHER

• Jackets • Jetties • Sluice ways • Infrastructure


• Caissons • Sheet Piling • Conveyors • Cement manufacturing
• Legs • Walkways • Slurry lines • Waste water
• Pipework • Power
SigmaShield 880
Unique Technology

• A two component polyamine adduct cured high build


epoxy
• 85% volume solids
• Dry film thickness 200 – 1000 microns
• Primarily designed for severe marine and offshore
use
• Outstanding water and abrasion resistance
• Long-term protection in a single coat
• Continues to cure when immersed in water
• Suitable for wet and dry preparation methods (damp
surfaces)
SigmaShield 880
Application tolerance

At very high film thickness > 1500 μm/ 60mils


• On hot/cold cycling Competitor cracking:
• Continuous at 60C/140F
SigmaShield 880
Better impact and abrasion

30% More abrasion resistant


• Less weight loss than competitor
WEIGHT LOSS SIGMASHIELD 880 COMPETITOR
ISO 5740/ASTM D4060
85 mg 120 mg

• Extended protection

• Without reinforcement
 Less equipment wear and tear
SigmaShield 880
Superior adhesion

Excellent adhesion on concrete (pull-off adhesion test)


• Dry and damp concrete
• Even with early water immersion

Dry substrate Damp substrate


and immersion
SigmaShield 880
Surface tolerant

Surface preparation and application tolerance


• Hydrojetted substrates
• Hand tooled substrates
• Spray, brush and roll application
SigmaShield 880
Reduced time to service

Rapid Immersion
• Can be immersed 30 minutes after application
• Continues to cure upon immersion
• Immersion cure under varied conditions
SigmaShield 880
Case History
Project name:
Pier Ring Beams

Location:
Nelson Pier Melbourne

Environment:
Marine

Coating system:
SIGMASHIELD 880

Project description:
• Pier Ring Beams
• Abrasive blast clean to Sa2 ½
• SIGMASHIELD 880 @ 700 μm
SigmaShield 880
Case History
Project name:
Wharf Fender Frames

Location:
BAE Melbourne Williamstown

Environment:
Marine

Coating system:
SIGMASHIELD

Project description:
• Jetty fender
• Abrasive blast clean to Sa2 ½
• SIGMASHIELD 880 @ 700 μm
SigmaShield 880
Case History
Project name:
Fenders at JT 7A

Location:
Pertamina - Balikpapan, Indonesia

Environment:
Marine

Coating system:
SIGMASHIELD 880 yellow

Project description:
• Jetty fender JT 7A at Pertamina in Balikpapan, Indonesia
• Spot abrasive blast clean to Sa2 ½ & HPWJ
• SIGMASHIELD 880 average DFT of 500 μm
SigmaShield 880
Case History
Project name:
Internal water pipe coating
Thermoelectric Plant

Location:
Changshan, China

Environment:
Internal lining

Coating system:
SIGMASHIELD 880 grey

Project description:
Abrasive blast clean to Sa 2 ½
Weld seams stripe coated
Sigmashield 880 applied @ 600μm
SigmaShield 880
Case History
Project name:
Steel structural support fabrication

Location:
ZPMC - Nantong, China

Environment:
Severe Marine

Coating system:
SIGMASHIELD 880 RAL 7001

Project description:
Abrasive blast clean to Sa 2 ½
Weld seams stripe coated
Sigmashield 880 applied @ 600μm
Thank you .

Trimakasih.

You might also like