Project Page 1 of 12

Project
First Saved Tuesday, December 10, 2019
Last Saved Tuesday, December 10, 2019
Product Version 19.2 Release
Save Project Before Solution No
Save Project After Solution No

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 2 of 12

Contents
l Units

l Model (A4)
¡ Geometry
n Parts
¡ Materials
n Structural Steel
¡ Coordinate Systems
¡ Connections
n Contacts
n Contact Regions
¡ Mesh
n Refinement
¡ Static Structural (A5)
n Analysis Settings
n Force
n Standard Earth Gravity
n Fixed Support
n Solution (A6)
n Solution Information
n Results

l Material Data
¡ Structural Steel

Units
TABLE 1
Unit System Metric (mm, kg, N, s, mV, mA) Degrees rad/s Celsius
Angle Degrees
Rotational Velocity rad/s
Temperature Celsius

Model (A4)
Geometry
TABLE 2
Model (A4) > Geometry
Object Name Geometry
State Fully Defined
Definition
C:\Users\opetrone\Desktop\SIMULACIONES SOLIDWORKS\PORTICO ACA TIMBUES\Diseño en SolidWorks\Ensamble
Source
Arco Inferior\Ensamble Arco Inferior 4.SLDASM
Type SOLIDWORKS
Length Unit Millimeters
Element Control Program Controlled
Display Style Body Color
Bounding Box
Length X 535.5 mm
Length Y 1800. mm
Length Z 2560. mm
Properties
Volume 1.8078e+007 mm³
Mass 141.91 kg
Scale Factor Value 1.
Statistics
Bodies 16
Active Bodies 16
Nodes 194418
Elements 96632
Mesh Metric None
Update Options
Assign Default Material No
Basic Geometry Options
Solid Bodies Yes
Surface Bodies Yes
Line Bodies No
Parameters Independent
Parameter Key ANS;DS
Attributes No
Named Selections No
Material Properties No
Advanced Geometry Options

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 3 of 12

Use Associativity Yes

Coordinate Systems No
Reader Mode Saves
No
Updated File
Use Instances Yes
Smart CAD Update Yes
Compare Parts On Update No
Analysis Type 3-D
Mixed Import Resolution None
Clean Bodies On Import No
Stitch Surfaces On Import No
Decompose Disjoint
Yes
Geometry
Enclosure and Symmetry
Yes
Processing

TABLE 3
Model (A4) > Geometry > Parts
Pata Travesaño Travesaño Travesaño Travesaño Refuerzo Planchuela Planchuela Refuerzo
Pata Empalme
Object Name Inferior Apoyo Apoyo Apoyo Apoyo Apoyo Pata Pata Apoyo
Inferior Pata Inferior
[2] Redler Redler[2] Redler[3] Redler[4] Redler 45º Inferior Inferior[2] Redler 45º[2]
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness
Flexible
Behavior
Coordinate
Default Coordinate System
System
Reference
By Environment
Temperature
Behavior None
Material
Assignment Structural Steel
Nonlinear
Yes
Effects
Thermal
Yes
Strain Effects
Bounding Box
Length X 95.5 mm 39.75 mm 73.35 mm 4.75 mm 73.35 mm 220. mm
Length Y 1800. mm 100. mm 470.23 mm 200. mm 470.23 mm 93.6 mm
Length Z 149.5 mm 2261. mm 470.23 mm 78. mm 470.23 mm 83.2 mm
Properties
3.2512e+006 5.1012e+005 5.1012e+005 1.7551e+005
Volume 1.7573e+006 mm³ 74100 mm³
mm³ mm³ mm³ mm³
Mass 25.522 kg 13.795 kg 4.0044 kg 0.58168 kg 4.0044 kg 1.3778 kg
28.817 -28.817 28.817 -28.817
Centroid X -9.3075 mm -10.898 mm 45.375 mm -10.898 mm -157.75 mm
mm mm mm mm
Centroid Y 900. mm 750. mm 250. mm 530.6 mm 250. mm 530.6 mm 751.8 mm
-
1205.3 -1.13e-010 1.2983e- -1205.3
Centroid Z 1205.3 -1.1391e-010 mm -961.1 mm 1205.3 mm 961.1 mm 1251.7 mm
mm mm 010 mm mm
mm
Moment of 6.9815e+006 85137 85137 7691.4
5.896e+006 kg·mm² 1940. kg·mm²
Inertia Ip1 kg·mm² kg·mm² kg·mm² kg·mm²
Moment of 1.2416e+005 8612.3 8612.3 3153.4
21070 kg·mm² 296.01 kg·mm²
Inertia Ip2 kg·mm² kg·mm² kg·mm² kg·mm²
Moment of 6.9245e+006 80954 80954 6576.
5.8788e+006 kg·mm² 2233.9 kg·mm²
Inertia Ip3 kg·mm² kg·mm² kg·mm² kg·mm²
Statistics
Nodes 3242 35232 29957 29582 32755 12569 226 12527 1496
Elements 432 17133 16694 16598 18167 6097 24 6063 189
Mesh Metric None

TABLE 4
Model (A4) > Geometry > Parts
Object Name Empalme Pata Inferior[2] Empalme Pata Inferior[3] Empalme Pata Inferior[4] Refuerzo IPN Refuerzo IPN[2]
State Meshed
Graphics Properties
Visible Yes
Transparency 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Behavior None
Material
Assignment Structural Steel
Nonlinear Effects Yes

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 4 of 12

Thermal Strain Effects Yes

Bounding Box
Length X 220. mm 90. mm
Length Y 93.6 mm 400. mm
Length Z 83.2 mm 200. mm
Properties
Volume 1.7551e+005 mm³ 1.3377e+006 mm³
Mass 1.3778 kg 10.501 kg
Centroid X -157.75 mm 157.75 mm 7.5874e-013 mm 5.2526e-013 mm
Centroid Y 751.8 mm 500. mm
Centroid Z -1251.7 mm 1251.7 mm -1251.7 mm -277.5 mm 277.5 mm
Moment of Inertia Ip1 7691.4 kg·mm² 70797 kg·mm²
Moment of Inertia Ip2 3153.4 kg·mm² 1.4367e+005 kg·mm²
Moment of Inertia Ip3 6576. kg·mm² 2.0716e+005 kg·mm²
Statistics
Nodes 1496 14402 14474
Elements 189 7089 7123
Mesh Metric None

Coordinate Systems
TABLE 5
Model (A4) > Coordinate Systems > Coordinate System
Object Name Global Coordinate System
State Fully Defined
Definition
Type Cartesian
Coordinate System ID 0.
Origin
Origin X 0. mm
Origin Y 0. mm
Origin Z 0. mm
Directional Vectors
X Axis Data [ 1. 0. 0. ]
Y Axis Data [ 0. 1. 0. ]
Z Axis Data [ 0. 0. 1. ]

Connections
TABLE 6
Model (A4) > Connections
Object Name Connections
State Fully Defined
Auto Detection
Generate Automatic Connection On Refresh Yes
Transparency
Enabled Yes

TABLE 7
Model (A4) > Connections > Contacts
Object Name Contacts
State Fully Defined
Definition
Connection Type Contact
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Auto Detection
Tolerance Type Slider
Tolerance Slider 0.
Tolerance Value 7.9374 mm
Use Range No
Face/Face Yes
Face Overlap Tolerance Off
Cylindrical Faces Include
Face/Edge No
Edge/Edge No
Priority Include All
Group By Bodies
Search Across Bodies
Statistics
Connections 30
Active Connections 30

TABLE 8
Model (A4) > Connections > Contacts > Contact Regions
Object Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact
Name Region Region 2 Region 3 Region 4 Region 5 Region 6 Region 7 Region 8 Region 9 Region 10 Region 11

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 5 of 12

State Fully Defined

Scope
Scoping
Geometry Selection
Method
Contact 2 Faces 1 Face 2 Faces
Target 1 Face 2 Faces 1 Face
Contact
Pata Inferior Pata Inferior[2]
Bodies
Refuerzo
Travesaño Travesaño Travesaño Travesaño Planchuela Empalme Empalme Travesaño Travesaño Travesaño
Target Apoyo
Apoyo Apoyo Apoyo Apoyo Pata Pata Pata Apoyo Apoyo Apoyo
Bodies Redler
Redler Redler[2] Redler[3] Redler[4] Inferior Inferior Inferior[3] Redler Redler[2] Redler[3]
45º[2]
Protected No
Definition
Type Bonded
Scope Mode Automatic
Behavior Program Controlled
Trim Contact Program Controlled
Trim
7.9374 mm
Tolerance
Suppressed No
Advanced
Formulation Program Controlled
Small
Program Controlled
Sliding
Detection
Program Controlled
Method
Penetration
Program Controlled
Tolerance
Elastic Slip
Program Controlled
Tolerance
Normal
Program Controlled
Stiffness
Update
Program Controlled
Stiffness
Pinball
Program Controlled
Region
Geometric Modification
Contact
Geometry None
Correction
Target
Geometry None
Correction

TABLE 9
Model (A4) > Connections > Contacts > Contact Regions
Contact Contact
Contact Contact Contact Contact Contact Contact Contact Contact Contact
Object Name Region Region
Region 12 Region 13 Region 14 Region 15 Region 16 Region 17 Region 18 Region 19 Region 22
20 21
State Fully Defined
Scope
Scoping
Geometry Selection
Method
Contact 2 Faces 1 Face 2 Faces 3 Faces 2 Faces
Target 1 Face 2 Faces 1 Face 2 Faces 1 Face
Travesaño
Contact
Pata Inferior[2] Travesaño Apoyo Redler Apoyo
Bodies
Redler[2]
Refuerzo
Travesaño Refuerzo Planchuela Empalme Empalme Travesaño Refuerzo Refuerzo
Target Apoyo Refuerzo Refuerzo
Apoyo Apoyo Pata Inferior Pata Pata Apoyo Apoyo Apoyo
Bodies Redler 45º IPN IPN[2]
Redler[4] Redler 45º [2] Inferior[2] Inferior[4] Redler[2] Redler 45º Redler 45º
[2]
Protected No
Definition
Type Bonded
Scope Mode Automatic
Behavior Program Controlled
Trim Contact Program Controlled
Trim
7.9374 mm
Tolerance
Suppressed No
Advanced
Formulation Program Controlled
Small Sliding Program Controlled
Detection
Program Controlled
Method
Penetration
Program Controlled
Tolerance
Elastic Slip
Program Controlled
Tolerance
Program Controlled
Normal

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 6 of 12

Stiffness
Update
Program Controlled
Stiffness
Pinball
Program Controlled
Region
Geometric Modification
Contact
Geometry None
Correction
Target
Geometry None
Correction

TABLE 10
Model (A4) > Connections > Contacts > Contact Regions
Contact Contact Contact Region Contact Contact Contact Contact
Object Name Contact Region 23
Region 24 Region 25 26 Region 27 Region 28 Region 29 Region 30
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 2 Faces 3 Faces 2 Faces 3 Faces
Target 1 Face 2 Faces 1 Face
Contact Bodies Travesaño Apoyo Redler[2] Travesaño Apoyo Redler[3] Travesaño Apoyo Redler[4]
Refuerzo Apoyo Refuerzo IPN Travesaño Apoyo Refuerzo IPN Refuerzo IPN
Target Bodies Refuerzo IPN Refuerzo IPN Refuerzo IPN
Redler 45º[2] [2] Redler[4] [2] [2]
Protected No
Definition
Type Bonded
Scope Mode Automatic
Behavior Program Controlled
Trim Contact Program Controlled
Trim Tolerance 7.9374 mm
Suppressed No
Advanced
Formulation Program Controlled
Small Sliding Program Controlled
Detection Method Program Controlled
Penetration
Program Controlled
Tolerance
Elastic Slip
Program Controlled
Tolerance
Normal Stiffness Program Controlled
Update Stiffness Program Controlled
Pinball Region Program Controlled
Geometric Modification
Contact Geometry
None
Correction
Target Geometry
None
Correction

Mesh
TABLE 11
Model (A4) > Mesh
Object Name Mesh
State Solved
Display
Display Style Use Geometry Setting
Defaults
Physics Preference Mechanical
Element Order Program Controlled
Element Size Default
Sizing
Use Adaptive Sizing Yes
Resolution Default (2)
Mesh Defeaturing Yes
Defeature Size Default
Transition Fast
Span Angle Center Coarse
Initial Size Seed Assembly
Bounding Box Diagonal 3175.0 mm
Average Surface Area 28832 mm²
Minimum Edge Length 3.2 mm
Quality
Check Mesh Quality Yes, Errors
Error Limits Standard Mechanical
Target Quality Default (0.050000)
Smoothing Medium
Mesh Metric None
Inflation

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 7 of 12

Use Automatic Inflation None

Inflation Option Smooth Transition
Transition Ratio 0.272
Maximum Layers 5
Growth Rate 1.2
Inflation Algorithm Pre
View Advanced Options No
Advanced
Number of CPUs for Parallel Part Meshing Program Controlled
Straight Sided Elements No
Number of Retries Default (4)
Rigid Body Behavior Dimensionally Reduced
Triangle Surface Mesher Program Controlled
Topology Checking Yes
Pinch Tolerance Please Define
Generate Pinch on Refresh No
Statistics
Nodes 194418
Elements 96632

TABLE 12
Model (A4) > Mesh > Mesh Controls
Object Name Refinement
State Fully Defined
Scope
Scoping Method Geometry Selection
Geometry 90 Faces
Definition
Suppressed No
Refinement 1

Static Structural (A5)

TABLE 13
Model (A4) > Analysis
Object Name Static Structural (A5)
State Solved
Definition
Physics Type Structural
Analysis Type Static Structural
Solver Target Mechanical APDL
Options
Environment Temperature 22. °C
Generate Input Only No

TABLE 14
Model (A4) > Static Structural (A5) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Step Controls
Number Of Steps 1.
Current Step Number 1.
Step End Time 1. s
Auto Time Stepping Program Controlled
Solver Controls
Solver Type Program Controlled
Weak Springs Off
Solver Pivot Checking Program Controlled
Large Deflection Off
Inertia Relief Off
Rotordynamics Controls
Coriolis Effect Off
Restart Controls
Generate Restart Points Program Controlled
Retain Files After Full Solve No
Combine Restart Files Program Controlled
Nonlinear Controls
Newton-Raphson Option Program Controlled
Force Convergence Program Controlled
Moment Convergence Program Controlled
Displacement Convergence Program Controlled
Rotation Convergence Program Controlled
Line Search Program Controlled
Stabilization Off
Output Controls
Stress Yes
Strain Yes
Nodal Forces No

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 8 of 12

Contact Miscellaneous No
General Miscellaneous No
Store Results At All Time Points
Analysis Data Management
Solver Files Directory C:\Users\opetrone\AppData\Local\Temp\WB_OPETRONE_opetrone_11168_2\unsaved_project_files\dp0\SYS\MECH\
Future Analysis None
Scratch Solver Files Directory
Save MAPDL db No
Contact Summary Program Controlled
Delete Unneeded Files Yes
Nonlinear Solution No
Solver Units Active System
Solver Unit System nmm

TABLE 15
Model (A4) > Static Structural (A5) > Loads
Object Name Force
State Fully Defined
Scope
Scoping Method Geometry Selection
Geometry 2 Faces
Definition
Type Force
Define By Components
Coordinate System Global Coordinate System
X Component 0. N (ramped)
Y Component -40000 N (ramped)
Z Component 0. N (ramped)
Suppressed No

FIGURE 1
Model (A4) > Static Structural (A5) > Force

TABLE 16
Model (A4) > Static Structural (A5) > Accelerations
Object Name Standard Earth Gravity
State Fully Defined
Scope
Geometry All Bodies
Definition
Coordinate System Global Coordinate System
X Component 0. mm/s² (ramped)
Y Component -9806.6 mm/s² (ramped)
Z Component 0. mm/s² (ramped)
Suppressed No
Direction -Y Direction

FIGURE 2
Model (A4) > Static Structural (A5) > Standard Earth Gravity

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 9 of 12

TABLE 17
Model (A4) > Static Structural (A5) > Loads
Object Name Fixed Support
State Fully Defined
Scope
Scoping Method Geometry Selection
Geometry 2 Faces
Definition
Type Fixed Support
Suppressed No

Solution (A6)
TABLE 18
Model (A4) > Static Structural (A5) > Solution
Object Name Solution (A6)
State Solved
Adaptive Mesh Refinement
Max Refinement Loops 1.
Refinement Depth 2.
Information
Status Done
MAPDL Elapsed Time 24. s
MAPDL Memory Used 3.1064 GB
MAPDL Result File Size 82.625 MB
Post Processing
Beam Section Results No
On Demand Stress/Strain No

TABLE 19
Model (A4) > Static Structural (A5) > Solution (A6) > Solution Information
Object Name Solution Information
State Solved
Solution Information
Solution Output Solver Output
Newton-Raphson Residuals 0
Identify Element Violations 0
Update Interval 2.5 s
Display Points All
FE Connection Visibility
Activate Visibility Yes
Display All FE Connectors
Draw Connections Attached To All Nodes
Line Color Connection Type
Visible on Results No
Line Thickness Single
Display Type Lines

TABLE 20
Model (A4) > Static Structural (A5) > Solution (A6) > Results
Object Name Equivalent Stress Total Deformation Strain Energy
State Solved
Scope
Scoping Method Geometry Selection

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 10 of 12

Geometry All Bodies

Definition
Type Equivalent (von-Mises) Stress Total Deformation Strain Energy
By Time
Display Time Last
Calculate Time History Yes
Identifier
Suppressed No
Integration Point Results
Display Option Averaged
Average Across Bodies No
Results
Minimum 1.17e-003 MPa 0. mm 6.0258e-007 mJ
Maximum 404.82 MPa 1.2198 mm 41.917 mJ
Average 25.223 MPa 0.57905 mm
Minimum Occurs On Empalme Pata Inferior[3] Pata Inferior Travesaño Apoyo Redler[4]
Maximum Occurs On Refuerzo IPN Travesaño Apoyo Redler Pata Inferior[2]
Total 22186 mJ
Information
Time 1. s
Load Step 1
Substep 1
Iteration Number 1

FIGURE 3
Model (A4) > Static Structural (A5) > Solution (A6) > Equivalent Stress

TABLE 21
Model (A4) > Static Structural (A5) > Solution (A6) > Equivalent Stress
Time [s] Minimum [MPa] Maximum [MPa] Average [MPa]
1. 1.17e-003 404.82 25.223

FIGURE 4
Model (A4) > Static Structural (A5) > Solution (A6) > Total Deformation

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 11 of 12

TABLE 22
Model (A4) > Static Structural (A5) > Solution (A6) > Total Deformation
Time [s] Minimum [mm] Maximum [mm] Average [mm]
1. 0. 1.2198 0.57905

FIGURE 5
Model (A4) > Static Structural (A5) > Solution (A6) > Strain Energy

TABLE 23
Model (A4) > Static Structural (A5) > Solution (A6) > Strain Energy
Time [s] Minimum [mJ] Maximum [mJ] Total [mJ]
1. 6.0258e-007 41.917 22186

Material Data
Structural Steel
TABLE 24
Structural Steel > Constants
Density 7.85e-006 kg mm^-3
Coefficient of Thermal Expansion 1.2e-005 C^-1
Specific Heat 4.34e+005 mJ kg^-1 C^-1
Thermal Conductivity 6.05e-002 W mm^-1 C^-1
Resistivity 1.7e-004 ohm mm

TABLE 25
Structural Steel > Color
Red Green Blue
132 139 179

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019
Project Page 12 of 12

TABLE 26
Structural Steel > Compressive Ultimate Strength
Compressive Ultimate Strength MPa
0

TABLE 27
Structural Steel > Compressive Yield Strength
Compressive Yield Strength MPa
250

TABLE 28
Structural Steel > Tensile Yield Strength
Tensile Yield Strength MPa
250

TABLE 29
Structural Steel > Tensile Ultimate Strength
Tensile Ultimate Strength MPa
460

TABLE 30
Structural Steel > Isotropic Secant Coefficient of Thermal Expansion
Zero-Thermal-Strain Reference Temperature C
22

TABLE 31
Structural Steel > S-N Curve
Alternating Stress MPa Cycles Mean Stress MPa
3999 10 0
2827 20 0
1896 50 0
1413 100 0
1069 200 0
441 2000 0
262 10000 0
214 20000 0
138 1.e+005 0
114 2.e+005 0
86.2 1.e+006 0

TABLE 32
Structural Steel > Strain-Life Parameters
Strength Coefficient Strength Ductility Ductility Cyclic Strength Coefficient Cyclic Strain Hardening
MPa Exponent Coefficient Exponent MPa Exponent
920 -0.106 0.213 -0.47 1000 0.2

TABLE 33
Structural Steel > Isotropic Elasticity
Young's Modulus MPa Poisson's Ratio Bulk Modulus MPa Shear Modulus MPa Temperature C
2.e+005 0.3 1.6667e+005 76923

TABLE 34
Structural Steel > Isotropic Relative Permeability
Relative Permeability
10000

file:///C:/Users/opetrone/AppData/Roaming/Ansys/v192/Mechanical_Report/Mechani... 10/12/2019