Az 104 1 55 PDF

Microsoft AZ-103 Exam
Exam Microsoft AZ-103 Exam
Title Microsoft Azure Administrator Exam
Version 6.0
Product
247 Q&A with explanations
Type
“Best Material, Great Results”. www.certkingdom.com 1 of 1

Questions & Answers PDF P-2
Product Questions: 247

Version: 6.0
Mix Questions
Question: 1
You have an Azure subscription that contains 10 virtual machines.

You need to ensure that you receive an email message when any virtual machines are powered off,
restarted, or deallocated.
What is the minimum number of rules and action groups that you require?
A. three rules and three action groups

B. one rule and one action group
C. three rules and one action group
D. one rule and three action groups
Answer: C
Explanation:
An action group is a collection of notification preferences defined by the user. Azure Monitor and
Service
Health alerts are configured to use a specific action group when the alert is triggered. Various alerts
may use the same action group or different action groups depending on the user's requirements.
References: https://docs.microsoft.com/en-us/azure/monitoring-and-diagnostics/monitoring-action-
groups
Question: 2
You have an Azure subscription that contains two resource groups named RG1 and RG2. RG2 does
not contain any resources. RG1 contains the resources in the following table.
https://certkingdom.com
https://www.dumpsschool.com/
Which resource can you move to RG2?
A. W10_OsDisk
B. VNet1
C. VNet3
D. W10
Answer: B
Explanation:
When moving a virtual network, you must also move its dependent resources. For example, you must
move gateways with the virtual network. VM W10, which is in Vnet1, is not a dependent resource.
Incorrect Answers:
A: Managed disks don't support move.
C: Virtual networks (classic) can't be moved.
D: Virtual machines with the managed disks cannot be moved.
References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-move-
resources#virtual-machines-limitations
Question: 3
You have 100 Azure subscriptions. All the subscriptions are associated to the same Azure Active
Directory (Azure AD) tenant named contoso.com.
You are a global administrator.
You plan to create a report that lists all the resources across all the subscriptions.
You need to ensure that you can view all the resources in all the subscriptions.
What should you do?
A. From the Azure portal, modify the profile settings of your account.
B. From Windows PowerShell, run the Add-AzureADAdministrativeUnitMember cmdlet.
C. From Windows PowerShell, run the New-AzureADUserAppRoleAssignment cmdlet.
D. From the Azure portal, modify the properties of the Azure AD tenant.
Answer: C
Explanation:
The New-AzureADUserAppRoleAssignment cmdlet assigns a user to an application role in Azure
Active Directory (AD). Use it for the application report.
References: https://docs.microsoft.com/en-us/powershell/module/azuread/new-
azureaduserapproleassignment?view=azureadps-2.0
Question: 4
Note: This question is part of a series of questions that present the same scenario. Each
question in the series contains a unique solution that might meet the stated goals. Some
question sets might have more than one correct solution, while others might not have a
correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result,
these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group
named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then click Programmatic
deployment.
Does this meet the goal?
A. Yes
B. No
Answer: B
Question: 5
correct solution.
Solution: From the RG1 blade, you click Deployments.
A. Yes
B. No
Answer: A
Question: 6
correct solution.

Solution: From the Subscriptions blade, you select the subscription, and then click Resource
providers.
A. Yes
B. No
Answer: B
Question: 7
DRAG DROP
You have an Azure subscription that contains a storage account.
You have an on-premises server named Server1 that runs Window Server 2016. Server1 has 2 TB of
dat
a.
You need to transfer the data to the storage account by using the Azure Import/Export service.
In which order should you perform the actions? To answer, move all actions from the list of actions to
the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct
orders you select.
Answer:
Question: 8
HOTSPOT
You have an Azure subscription named Subscription1.
In Subscription1, you create an Azure file share named share1.
You create a shared access signature (SAS) named SAS1 as shown in the following exhibit.
To answer, select the appropriate options in the answer are

a.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Box 1: Will be prompted for credentials
Azure Storage Explorer is a standalone app that enables you to easily work with Azure Storage data
on Windows, macOS, and Linux. It is used for connecting to and managing your Azure storage
accounts.
Box 2: Will have read, write, and list access
The net use command is used to connect to file shares.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-dotnet-shared-access-signature-
part-1
https://docs.microsoft.com/en-us/azure/vs-azure-tools-storage-manage-with-storage-
explorer?tabs=windows
Question: 9
You have the Azure virtual machines shown in the following table.
You have a Recovery Services vault that protects VM1 and VM2.
You need to protect VM3 and VM4 by using Recovery Services.
What should you do first?
A. Configure the extensions for VM3 and VM4.

B. Create a new Recovery Services vault.
C. Create a storage account.
D. Create a new backup policy.
Answer: B
Explanation:
A Recovery Services vault is a storage entity in Azure that houses data. The data is typically copies
of data, or configuration information for virtual machines (VMs), workloads, servers, or workstations.
You can use Recovery Services vaults to hold backup data for various Azure services
References: https://docs.microsoft.com/en-us/azure/site-recovery/azure-to-azure-tutorial-enable-
replication
Question: 10
DRAG DROP
You have an on-premises file server named Server1 that runs Windows Server 2016.
You have an Azure subscription that contains an Azure file share.
You deploy an Azure File Sync Storage Sync Service, and you create a sync group.
You need to synchronize files from Server1 to Azure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from
the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Install the Azure File Sync agent on Server1
The Azure File Sync agent is a downloadable package that enables Windows Server to be synced
with an Azure file share
Step 2: Register Server1.
Register Windows Server with Storage Sync Service
Registering your Windows Server with a Storage Sync Service establishes a trust relationship
between your server (or cluster) and the Storage Sync Service.
Step 3: Add a server endpoint
Create a sync group and a cloud endpoint.
A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in
sync with each other. A sync group must contain one cloud endpoint, which represents an Azure file
share and one or more server endpoints. A server endpoint represents a path on registered server.
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide
Question: 11
You have an Azure subscription that contains the resources in the following table.
Store1 contains a file share named Dat

a. Data contains 5,000 files.
You need to synchronize the files in Data to an on-premises server named Server1.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Download an automation script.
B. Create a container instance.
C. Create a sync group.
D. Register Server1.
E. Install the Azure File Sync agent on Server1.
Answer: CDE
Explanation:
Step 1 (E): Install the Azure File Sync agent on Server1
The Azure File Sync agent is a downloadable package that enables Windows Server to be synced
with an Azure file share
Step 2 (D): Register Server1.
Register Windows Server with Storage Sync Service
Registering your Windows Server with a Storage Sync Service establishes a trust relationship
between your server (or cluster) and the Storage Sync Service.
Step 3 (C): Create a sync group and a cloud endpoint.
A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in
sync with each other. A sync group must contain one cloud endpoint, which represents an Azure file
share and one or more server endpoints. A server endpoint represents a path on registered server.
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide
Question: 12
HOTSPOT
You plan to create an Azure Storage account in the Azure region of East US 2.
You need to create a storage account that meets the following requirements:
 Replicates synchronously
 Remains available if a single data center in the region fails
How should you configure the storage account? To answer, select the appropriate options in the
answer are
a.
Answer:
Explanation:
Box 1: Zone-redundant storage (ZRS)
Zone-redundant storage (ZRS) replicates your data synchronously across three storage clusters in a
single region.
LRS would not remain available if a data center in the region fails
GRS and RA GRS use asynchronous replication.
Box 2: StorageV2 (general purpose V2)
ZRS only support GPv2.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy-zrs
Question: 13
You plan to use the Azure Import/Export service to copy files to a storage account.
Which two files should you create before you prepare the drives for the import job? Each correct
answer presents part of the solution.
A. an XML manifest file

B. a driveset CSV file
C. a dataset CSV file
D. a PowerShell PS1 file
E. a JSON configuration file
Answer: BC
Explanation:
B: Modify the driveset.csv file in the root folder where the tool resides.
C: Modify the dataset.csv file in the root folder where the tool resides. Depending on whether you
want to import a file or folder or both, add entries in the dataset.csv file
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-data-to-
files
Question: 14
You have a Recovery Service vault that you use to test backups. The test backups contain two
protected virtual machines.
You need to delete the Recovery Services vault.
A. From the Recovery Service vault, stop the backup of each backup item.
B. From the Recovery Service vault, delete the backup data.
C. Modify the disaster recovery properties of each virtual machine.
D. Modify the locks of each virtual machine.
Answer: A
Explanation:
You can't delete a Recovery Services vault if it is registered to a server and holds backup data. If you
try to delete a vault, but can't, the vault is still configured to receive backup data.
Remove vault dependencies and delete vault
In the vault dashboard menu, scroll down to the Protected Items section, and click Backup Items. In
this menu, you can stop and delete Azure File Servers, SQL Servers in Azure VM, and Azure virtual
machines.
References: https://docs.microsoft.com/en-us/azure/backup/backup-azure-delete-vault
Question: 15
DRAG DROP
You create an Azure Storage account named contosostorage, and then you create a file share named
dat
a.
Which UNC path should you include in a script that references files from the data file share? To
answer, drag the appropriate values to the correct targets. Each value may be used once, more than
once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
Box 1: contosostorage
The name of account
Box 2: file.core.windows.net
Box 3: data
The name of the file share is data.
Example:
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows
Question: 16
HOTSPOT
You have an Azure Storage accounts as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the
information presented in the graphic.
Answer:
Explanation:
Box 1: storageaccount1 and storageaccount2 only
Box 2: All the storage accounts
Note: The three different storage account options are: General-purpose v2 (GPv2) accounts,
General-purpose v1 (GPv1) accounts, and Blob storage accounts.
 General-purpose v2 (GPv2) accounts are storage accounts that support all of the latest
features for blobs, files, queues, and tables.
 Blob storage accounts support all the same block blob features as GPv2, but are limited to
supporting only block blobs.
 General-purpose v1 (GPv1) accounts provide access to all Azure Storage services, but may
not have the latest features or the lowest per gigabyte pricing.
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-account-options
Question: 17
You have an Azure subscription that contains 100 virtual machines.
You regularly create and delete virtual machines.

You need to identify unused disks that can be deleted.
What should you do?
A. From Microsoft Azure Storage Explorer, view the Account Management properties.
B. From the Azure portal, configure the Advisor recommendations.
C. From Cloudyn, open the Optimizer tab and create a report.
D. From Cloudyn, create a Cost Management report.
Answer: C
Explanation:
The Unattached Disks report lists storage that is not attached to any active VM. To open the report,
click in the Optimizer tab. Select Inefficiencies and the click Unattached Disks.
Rreferences:
https://social.msdn.microsoft.com/Forums/en-US/0e4b3c28-a7f3-416b-84b7-3753f534e1b9/faq-how-
to-save-money-with-cloudyn-8211-10-steps?forum=Cloudyn
https://docs.microsoft.com/en-us/azure/cost-management/overview
Question: 18
DRAG DROP
You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs
Windows Server 2016 and is part of an availability set.
VM1 has virtual machine-level backup enabled.
VM1 is deleted.
You need to restore VM1 from the backup. VM1 must be part of the availability set.
Answer:
Question: 19
You deploy a Linux virtual machine named VM1 to Subscription1.

You need to monitor the metrics and the logs of VM1.
What should you use?
A. LAD 3.0
B. Azure Analysis Services
C. the AzurePerformanceDiagnostics extension
D. Azure HDInsight
Answer: C
Explanation:
You can use extensions to configure diagnostics on your VMs to collect additional metric data.
The basic host metrics are available, but to see more granular and VM-specific metrics, you need to
install the Azure diagnostics extension on the VM. The Azure diagnostics extension allows additional
monitoring and diagnostics data to be retrieved from the VM.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/tutorial-monitoring
Question: 20
HOTSPOT
You plan to deploy an Ubuntu Server virtual machine named VM1 to Subscription1.
You need to perform a custom deployment of the virtual machine. A specific trusted root certification
authority (CA) must be added during the deployment.
What should you do? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
Box 1: Unattend.xml
In preparation to deploy shielded VMs, you may need to create an operating system specialization
answer file. On Windows, this is commonly known as the "unattend.xml" file. The New-
ShieldingDataAnswerFile Windows PowerShell function helps you do this. Starting with Windows
Server version 1709, you can run certain Linux guest OSes in shielded VMs. If you are using the
System Center Virtual Machine Manager Linux agent to specialize those VMs, the New-
ShieldingDataAnswerFile cmdlet can create compatible answer files for it.
Box 2: The Azure Portal
You can use the Azure portal to deploy a Linux virtual machine (VM) in Azure that runs Ubuntu.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/quick-create-portal
Question: 21
You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine
named VM1.
You have a computer named Computer1 that runs Windows 10. Computer1 is connected to the
Internet.
You add a network interface named Interface1 to VM1 as shown in the exhibit (Click the Exhibit
button.)
From Computer1, you attempt to connect to VM1 by using Remote Desktop, but the connection fails.
You need to establish a Remote Desktop connection to VM1.
A. Start VM1.
B. Attach a network interface.
C. Delete the DenyAllOutBound outbound port rule.
D. Delete the DenyAllInBound inbound port rule.
Answer: A
Incorrect Answers:
B: The network interface has already been added to VM.
C: The Outbound rules are fine.
D: The inbound rules are fine. Port 3389 is used for Remote Desktop.
Note: Rules are processed in priority order, with lower numbers processed before higher numbers,
because lower numbers have higher priority. Once traffic matches a rule, processing stops. As a
result, any rules that exist with lower priorities (higher numbers) that have the same attributes as rules
with higher priorities are not processed.
References: https://docs.microsoft.com/en-us/azure/virtual-network/security-overview
Question: 22
You plan to automate the deployment of a virtual machine scale set that uses the Windows Server
2016 Datacenter image.
You need to ensure that when the scale set virtual machines are provisioned, they have web server
components installed.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE Each correct selection is worth one point.
A. Modify the extensionProfile section of the Azure Resource Manager template.

B. Create a new virtual machine scale set in the Azure portal.
C. Create an Azure policy.
D. Create an automation account.
E. Upload a configuration script.
Answer: AB
Explanation:
Virtual Machine Scale Sets can be used with the Azure Desired State Configuration (DSC) extension
handler. Virtual machine scale sets provide a way to deploy and manage large numbers of virtual
machines, and can elastically scale in and out in response to load. DSC is used to configure the VMs
as they come online so they are running the production software.
References: https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-
sets-dsc
Question: 23
You have an Azure subscription that contains a virtual machine named VM1. VM1 hosts a line-of-
business application that is available 24 hours a day. VM1 has one network interface and one
managed disk. VM1 uses the D4s v3 size.
You plan to make the following changes to VM1:
 Change the size to D8s v3.
 Add a 500-GB managed disk.
 Add the Puppet Agent extension.
 Attach an additional network interface.
Which change will cause downtime for VM1?
A. Add a 500-GB managed disk.

B. Attach an additional network interface.
C. Add the Puppet Agent extension.
D. Change the size to D8s v3.
Answer: D
Explanation:
While resizing the VM it must be in a stopped state.
References: https://azure.microsoft.com/en-us/blog/resize-virtual-machines/
Question: 24
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains two Azure virtual
machines named VM1 and VM2. VM1 and VM2 run Windows Server 2016.
VM1 is backed up daily by Azure Backup without using the Azure Backup agent.
VM1 is affected by ransomware that encrypts dat
a.
You need to restore the latest backup of VM1.
To which location can you restore the backup? To answer, select the appropriate options in the
answer area.
Answer:
Explanation:
Box 1: VM1 only
To restore files or folders from the recovery point, go to the virtual machine and choose the desired
recovery point.
Box 2: A new Azure virtual machine only
On the Restore configuration blade, you have two choices:
 Create virtual machine
 Restore disks
References:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-restore-files-from-vm
https://docs.microsoft.com/en-us/azure/backup/backup-azure-arm-restore-vms
Question: 25
HOTSPOT
You purchase a new Azure subscription named Subscription1.
You create a virtual machine named VM1 in Subscription1. VM1 is not protected by Azure Backup.
You need to protect VM1 by using Azure Backup. Backups must be created at 01:00 and stored for
30 days.
What should you do? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
Box 1: A Recovery Services vault
A Recovery Services vault is an entity that stores all the backups and recovery points you create over
time.
Box 2: A backup policy
What happens when I change my backup policy?
When a new policy is applied, schedule and retention of the new policy is followed.
References:
https://docs.microsoft.com/en-us/azure/backup/backup-configure-vault
https://docs.microsoft.com/en-us/azure/backup/backup-azure-backup-faq
Question: 26
DRAG DROP
You have an availability set named AS1 that contains three virtual machines named VM1, VM2, and
VM3.
You attempt to reconfigure VM1 to use a larger size. The operation fails and you receive an allocation
failure message.
You need to ensure that the resize operation succeeds.
Answer:
Question: 27
Note: This question is part of a series of questions that present the same scenario. Each question in the
series contains a unique solution that might meet the stated goals. Some question sets might have more
than one correct solution, while others might not have a correct solution.
You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure
Resource Manager template named ARM1.json.
You receive a notification that VM1 will be affected by maintenance.
You need to move VM1 to a different host immediately.
Solution: From the Redeploy blade, you click Redeploy.
A. Yes
B. No
Answer: A
Explanation:
When you redeploy a VM, it moves the VM to a new node within the Azure infrastructure and then
powers it back on, retaining all your configuration options and associated resources.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-new-node
Question: 28
correct solution.
Solution: From the Overview blade, you move the virtual machine to a different resource group.
A. Yes
B. No
Answer: B
Explanation:
You should redeploy the VM.
Question: 29
DRAG DROP
You have an Azure subscription. The subscription includes a virtual network named VNet1. Currently,
VNet1 does not contain any subnets.
You plan to create subnets on VNet1 and to use application security groups to restrict the traffic
between the subnets. You need to create the application security groups and to assign them to the
subnets.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the
list of cmdlets to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: New-AzureRmNetworkSecurityRuleConfig
Step 2: New-AzureRmNetworkSecurityGroup
Step 3: New-AzureRmVirtualNetworkSubnetConfig
Step 4: New-AzureRmVirtualNetwork
Example: Create a virtual network with a subnet referencing a network security group
New-AzureRmResourceGroup -Name TestResourceGroup -Location centralus
$rdpRule = New-AzureRmNetworkSecurityRuleConfig -Name rdp-rule -Description "Allow RDP" -
Access Allow -Protocol Tcp -Direction Inbound -Priority 100 -SourceAddressPrefix Internet -
SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 3389
$networkSecurityGroup = New-AzureRmNetworkSecurityGroup -ResourceGroupName
TestResourceGroup -Location centralus -Name "NSG-FrontEnd" -SecurityRules $rdpRule
$frontendSubnet = New-AzureRmVirtualNetworkSubnetConfig -Name frontendSubnet -
AddressPrefix "10.0.1.0/24" -NetworkSecurityGroup $networkSecurityGroup
$backendSubnet = New-AzureRmVirtualNetworkSubnetConfig -Name backendSubnet -
AddressPrefix "10.0.2.0/24" -NetworkSecurityGroup $networkSecurityGroup
New-AzureRmVirtualNetwork -Name MyVirtualNetwork -ResourceGroupName TestResourceGroup -
Location centralus -AddressPrefix "10.0.0.0/16" -Subnet $frontendSubnet,$backendSubnet
References: https://docs.microsoft.com/en-us/powershell/module/azurerm.network/new-
azurermvirtualnetwork?view=azurermps-6.7.0
Question: 30
Subnet1 is associated to VNet1. NIC1 attaches VM1 to Subnet1.

You need to apply ASG1 to VM1.
What should you do?
A. Modify the properties of NSG1.

B. Modify the properties of ASG1.
C. Associate NIC1 to ASG1.
Answer: B
Explanation:
When you deploy VMs, make them members of the appropriate ASGs.
You associate the ASG with a subnet.
References: https://azure.microsoft.com/en-us/blog/applicationsecuritygroups/
Question: 31
HOTSPOT
Subscription1 contains the virtual machines in the following table.
Subscription1 contains a virtual network named VNet1 that has the subnets in the following table.
VM3 has a network adapter named NIC3. IP forwarding is enabled on NIC3. Routing is enabled on
VM3.
You create a route table named RT1. RT1 is associated to Subnet1 and Subnet2 and contains the
routes in the following table.
You apply RT1 to Subnet1.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Box 1: Yes
Traffic from VM1 and VM2 can reach VM3 thanks to the routing table, and as IP forwarding is
enabled on VM3, traffic from VM3 can reach VM1.
Box 2: No
VM3, which has IP forwarding, must be turned on, in order for traffic from VM2 to reach VM1.
Box 3: Yes
The traffic from VM1 will reach VM3, which thanks to IP forwarding, will send the traffic to VM2.
References: https://www.quor
a.com/What-is-IP-forwarding
Question: 32
HOTSPOT
You plan to deploy five virtual machines to a virtual network subnet.

Each virtual machine will have a public IP address and a private IP address.
Each virtual machine requires the same inbound and outbound security rules.
What is the minimum number of network interfaces and network security groups that you require? To
answer, select the appropriate options in the answer area.
Answer:
Explanation:
Box 1: 10
One public and one private network interface for each of the five VMs.
Box 2: 1
You can associate zero, or one, network security group to each virtual network subnet and network
interface in a virtual machine. The same network security group can be associated to as many
subnets and network interfaces as you choose.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/security-overview
Question: 33
You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated
to a different Azure AD tenant.
Subscription1 contains a virtual network named VNet1.VNet1 contains an Azure virtual machine
named VM1 and has an IP address space of 10.0.0.0/16.
Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine
named VM2 and has an IP address space of 10.10.0.0/24.
You need to connect VNet1 to VNet2.
A. Move VNet1 to Subscription2.

B. Modify the IP address space of VNet2.
C. Provision virtual network gateways.
D. Move VM1 to Subscription2.
Answer: C
Explanation:
The virtual networks can be in the same or different regions, and from the same or different
subscriptions. When connecting VNets from different subscriptions, the subscriptions do not need to
be associated with the same Active Directory tenant.
Configuring a VNet-to-VNet connection is a good way to easily connect VNets. Connecting a virtual
network to another virtual network using the VNet-to-VNet connection type (VNet2VNet) is similar to
creating a Site-to-Site IPsec connection to an on-premises location. Both connectivity types use a
VPN gateway to provide a secure tunnel using IPsec/IKE, and both function the same way when
communicating.
The local network gateway for each VNet treats the other VNet as a local site. This lets you specify
additional address space for the local network gateway in order to route traffic.
References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnet-
resource-manager-portal
Question: 34
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains the resources in the
following table.
In Azure, you create a private DNS zone named adatum.com. You set the registration virtual network
to VNet2. The adatum.com zone is configured as shown in the following exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Box 1: No
Azure DNS provides automatic registration of virtual machines from a single virtual network that's
linked to a private zone as a registration virtual network. VM5 does not belong to the registration
virtual network though.
Box 2: No
Forward DNS resolution is supported across virtual networks that are linked to the private zone as
resolution virtual networks. VM5 does belong to a resolution virtual network.
Box 3: Yes
VM6 belongs to registration virtual network, and an A (Host) record exists for VM9 in the DNS zone.
By default, registration virtual networks also act as resolution virtual networks, in the sense that DNS
resolution against the zone works from any of the virtual machines within the registration virtual
network.
References: https://docs.microsoft.com/en-us/azure/dns/private-dns-overview
Question: 35
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine
named VM1.
You install and configure a web server and a DNS server on VM1.
VM1 has the effective network security rules shown in the following exhibit.
Answer:
Question: 36
Your company has an Azure subscription named Subscription1.
The company also has two on-premises servers named Server1 and Server2 that run Windows
Server 2016. Server1 is configured as a DNS server that has a primary DNS zone named
adatum.com. Adatum.com contains 1,000 DNS records.
You manage Server1 and Subscription1 from Server2. Server2 has the following tools installed:
 The DNS Manager console
 Azure PowerShell
 Azure CLI 2.0
You need to move the adatum.com zone to Subscription1. The solution must minimize administrative
effort.
What should you use?
A. Azure PowerShell
B. Azure CLI
C. the Azure portal
D. the DNS Manager console
Answer: B
Explanation:
Azure DNS supports importing and exporting zone files by using the Azure command-line interface
(CLI). Zone file import is not currently supported via Azure PowerShell or the Azure portal.
References: https://docs.microsoft.com/en-us/azure/dns/dns-import-export
Question: 37
VM1 and VM2 are deployed from the same template and host line-of-business applications accessed
by using Remote Desktop. You configure the network security group (NSG) shown in the exhibit.
(Click the Exhibit button.)
You need to prevent users of VM1 and VM2 from accessing websites on the Internet.
What should you do?
A. Associate the NSG to Subnet1.

B. Disassociate the NSG from a network interface.
C. Change the DenyWebSites outbound security rule.
D. Change the Port_80 inbound security rule.
Answer: A
Explanation:
You can associate or dissociate a network security group from a network interface or subnet.
The NSG has the appropriate rule to block users from accessing the Internet. We just need to
associate it with Subnet1.
References: https://docs.microsoft.com/en-us/azure/virtual-network/manage-network-security-group
Question: 38
HOTSPOT
You have peering configured as shown in the following exhibit.
Answer:
Explanation:
Box 1: vNET6 only

Box 2: Modify the address space
The virtual networks you peer must have non-overlapping IP address spaces.
References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-
peering#requirements-and-constraints
Question: 39
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains the virtual networks in
the following table.
Subscription1 contains the virtual machines in the following table:
The firewalls on all the virtual machines are configured to allow all ICMP traffic.
You add the peerings in the following table.
For each of the following statements, select Yest if the statement is true. Otherwise, select No.
Answer:
Explanation:
Box 1: Yes
Vnet1 and Vnet3 are peers.
Box 2: Yes
Vnet2 and Vnet3 are peers.
Box 3: No
Peering connections are non-transitive.
References: https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-
networking/hub-spoke
Question: 40
To which subnets can you apply NSG1?
A. the subnets on VNet2 only

B. the subnets on VNet1 only
C. the subnets on VNet2 and VNet3 only
D. the subnets on VNet1, VNet2, and VNet3
E. the subnets on VNet3 only
Answer: E
Explanation:
All Azure resources are created in an Azure region and subscription. A resource can only be created
in a virtual network that exists in the same region and subscription as the resource.
References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-vnet-plan-design-
arm
Question: 41
You create an Azure Storage account named contosostorage.
You plan to create a file share named dat

a.
Users need to map a drive to the data file share from home computers that run Windows 10.
Which port should be open between the home computers and the data file share?
A. 80
B. 443
C. 445
D. 3389
Answer: C
Explanation:
Ensure port 445 is open: The SMB protocol requires TCP port 445 to be open; connections will fail if
port 445 is blocked.
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows
Question: 42
You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com.
Your company has a public DNS zone for contoso.com.
You add contoso.com as a custom domain name to Azure AD.
You need to ensure that Azure can verify the domain name.
Which type of DNS record should you create?
A. RRSIG
B. PTR
C. DNSKEY
D. TXT
Answer: D
Explanation:
Create the TXT record. App Services uses this record only at configuration time to verify that you own
the custom domain. You can delete this TXT record after your custom domain is validated and
configured in App Service.
References: https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain
Question: 43
DRAG DROP
You have an Azure Active Directory (Azure AD) tenant that has the initial domain name.
You have a domain name of contoso.com registered at a third-party registrar.
You need to ensure that you can create Azure AD users that have names containing a suffix of
@contoso.com.
Which three actions should you perform in sequence? To answer, move the appropriate cmdlets from
the list of cmdlets to the answer area and arrange them in the correct order.
Answer:
Explanation:
The process is simple:
1. Add the custom domain name to your directory
2. Add a DNS entry for the domain name at the domain name registrar
3. Verify the custom domain name in Azure AD
References: https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain
Question: 44
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains the resources in the
following table.
VNet1 is in RG1. VNet2 is in RG2. There is no connectivity between VNet1 and Vnet2.
An administrator named Admin1 creates an Azure virtual machine named VM1 in RG1. VM1 uses a
disk named Disk1 and connects to VNet1. Admin1 then installs a custom application in VM1.
You need to move the custom application to Vnet2. The solution must minimize administrative effort.
Which two actions should you perform? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
You can move a VM and its associated resources to another resource group using the portal.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/move-vm
Question: 45
correct solution.

You have an Azure subscription that contains 10 virtual networks. The virtual networks are hosted in
separate resource groups.
Another administrator plans to create several network security groups (NSGs) in the subscription.
You need to ensure that when an NSG is created, it automatically blocks TCP port 8080 between the
virtual networks.
Solution: From the Resource providers blade, you unregister the Microsoft.ClassicNetwork provider.
A. Yes
B. No
Answer: B
Question: 46
correct solution.
virtual networks.
Solution: You configure a custom policy definition, and then you assign the policy to the subscription.
A. Yes
B. No
Answer: A
Explanation:
Resource policy definition used by Azure Policy enables you to establish conventions for resources in
your organization by describing when the policy is enforced and what effect to take. By defining
conventions, you can control costs and more easily manage your resources.
References: https://docs.microsoft.com/en-us/azure/azure-policy/policy-definition
Question: 47
correct solution.

virtual networks.
Solution: You create a resource lock, and then you assign the lock to the subscription.
A. Yes
B. No
Answer: B
Explanation:
How can I freeze or lock my production/critical Azure resources from accidental deletion? There is
way to do this with both ASM and ARM resources using Azure resource lock.
References: https://blogs.msdn.microsoft.com/azureedu/2016/04/27/using-azure-resource-manager-
policy-and-azure-lock-to-control-your-azure-resources/
Question: 48
You have an Azure Active Directory (Azure AD) domain that contains 5,000 user accounts. You
create a new user account named AdminUser1.
You need to assign the User administrator administrative role to AdminUser1.
What should you do from the user account properties?
A. From the Directory role blade, modify the directory role.

B. From the Groups blade, invite the user account to a new group.
C. From the Licenses blade, assign a new license.
Answer: A
Explanation:
Assign a role to a user
1. Sign in to the Azure portal with an account that's a global admin or privileged role admin for the
directory.
2. Select Azure Active Directory, select Users, and then select a specific user from the list.
3. For the selected user, select Directory role, select Add role, and then pick the appropriate admin
roles from the Directory roles list, such as Conditional access administrator.
4. Press Select to save.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/active-directory-
users-assign-role-azure-portal
Question: 49
HOTSPOT
You have an Azure Active Directory (Azure AD) tenant named adatum.com. Adatum.com contains the
groups in the following table.
You create two user accounts that are configured as shown in the following table.
To which groups do User1 and User2 belong? To answer. select the appropriate options in the answer
are
a.
Answer:
Explanation:
Box 1: Group 1 only
First rule applies
Box 2: Group1 and Group2 only
Both membership rules apply.
References: https://docs.microsoft.com/en-us/sccm/core/clients/manage/collections/create-collections
Question: 50
You have an Active Directory forest named contoso.com.

You install and configure Azure AD Connect to use password hash synchronization as the single sign-
on (SSO) method. Staging mode is enabled.
You review the synchronization results and discover that the Synchronization Service Manager does
not display any sync jobs.
You need to ensure that the synchronization completes successfully.
What should you do?
A. From Synchronization Service Manager, run a full import.

B. Run Azure AD Connect and set the SSO method to Pass-through Authentication.
C. From Azure PowerShell, run Start-AdSyncSyncCycle -PolicyType Initial.
D. Run Azure AD Connect and disable staging mode.
Answer: D
Explanation:
Staging mode must be disabled. If the Azure AD Connect server is in staging mode, password hash
synchronization is temporarily disabled.
References: https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory-
aadconnectsync-troubleshoot-password-hash-synchronization#no-passwords-are-synchronized-
troubleshoot-by-using-the-troubleshooting-task
Question: 51
You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com that contains
100 user accounts.
You purchase 10 Azure AD Premium P2 licenses for the tenant.
You need to ensure that 10 users can use all the Azure AD Premium features.
What should you do?
A. From the Groups blade of each user, invite the users to a group.
B. From the Licenses blade of Azure AD, assign a license.
C. From the Directory role blade of each user, modify the directory role.
D. From the Azure AD domain, add an enterprise application.
Answer: B
Explanation:
To assign a license, under Azure Active Directory > Licenses > All Products, select one or more
products, and then select Assign on the command bar.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/license-users-
groups
Question: 52
HOTSPOT
Your network contains an Active Directory domain named adatum.com and an Azure Active Directory
(Azure AD) tenant named adatum.onmicrosoft.com.
Adatum.com contains the user accounts in the following table.
Adatum.onmicrosoft.com contains the user accounts in the following table.
You need to implement Azure AD Connect. The solution must follow the principle of least privilege.
Which user accounts should you use? To answer, select the appropriate options in the answer are
a.
Answer:
Explanation:
Box 1: User5
In Express settings, the installation wizard asks for the following:
AD DS Enterprise Administrator credentials
Azure AD Global Administrator credentials
The AD DS Enterprise Admin account is used to configure your on-premises Active Directory. These
credentials are only used during the installation and are not used after the installation has completed.
The Enterprise Admin, not the Domain Admin should make sure the permissions in Active Directory
can be set in all domains.
Box 2: UserA
Azure AD Global Admin credentials credentials are only used during the installation and are not used
after the installation has completed. It is used to create the Azure AD Connector account used for
synchronizing changes to Azure AD. The account also enables sync as a feature in Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory-
aadconnect-accounts-permissions
Question: 53
You download an Azure Resource Manager template based on an existing virtual machine. The
template will be used to deploy 100 virtual machines.
You need to modify the template to reference an administrative password. You must prevent the
password from being stored in plain text.
What should you create to store the password?
A. Azure Active Directory (AD) Identity Protection and an Azure policy

B. a Recovery Services vault and a backup policy
C. an Azure Key Vault and an access policy
D. an Azure Storage account and an access policy
Answer: C
Explanation:
You can use a template that allows you to deploy a simple Windows VM by retrieving the password
that is stored in a Key Vault. Therefore the password is never put in plain text in the template
parameter file.
References: https://azure.microsoft.com/en-us/resources/templates/101-vm-secure-password/
Question: 54
Your company registers a domain name of contoso.com.

You create an Azure DNS named contoso.com and then you add an A record to the zone for a host
named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP
address.
You need to resolve the name resolution issue.
Solution: You modify the name server at the domain registrar.
A. Yes
B. No
Answer: B
Explanation:
Modify the Name Server (NS) record.
References: https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns
Question: 55

address.
Solution: You add an NS record to the contoso.com zone.
A. Yes
B. No
Answer: A
Explanation:
Before you can delegate your DNS zone to Azure DNS, you need to know the name servers for your
zone. The NS record set contains the names of the Azure DNS name servers assigned to the zone.
References: https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns
Question: 56

address.
Solution: You modify the SOA record in the contoso.com zone
A. Yes
B. No
Answer: B
Explanation:
Modify the NS record, not the SOA record.
Note: The SOA record stores information about the name of the server that supplied the data for the
zone; the administrator of the zone; the current version of the data file; the number of seconds a
secondary name server should wait before checking for updates; the number of seconds a secondary
name server should wait before retrying a failed zone transfer; the maximum number of seconds that
a secondary name server can use data before it must either be refreshed or expire; and a default
number of seconds for the time-to-live file on resource records.
References: https://searchnetworking.techtarget.com/definition/start-of-authority-record
Question: 57
correct solution.
Solution: From the RG1 blade, you click Automation script.
A. Yes
B. No
Answer: B
Question: 58
correct solution.
Solution: Solution: From the Overview blade, you move the virtual machine to a different subscription.
A. Yes
B. No
Answer: B
Explanation:
You would need to Redeploy the VM.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-new-node
Question: 59
correct solution.

Solution: From the Update management blade, you click enable.
A. Yes
B. No
Answer: B
Explanation:
You would need to Redeploy the VM.
Question: 60
HOTSPOT
You have an Azure subscription.
You need to implement a custom policy that meet the following requirements:
*Ensures that each new resource group in the subscription has a tag named organization set to a
value of Contoso.
*Ensures that resource group can be created from the Azure portal.
*Ensures that compliance reports in the Azure portal are accurate.
How should you complete the policy? To answer, select the appropriate options in the answers are
a.
Answer:
References: https://docs.microsoft.com/en-us/azure/governance/policy/concepts/definition-structure
Question: 61
You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com.
Your company has a public DNS zone for contoso.com.
You add contoso.com as a custom domain name to Azure AD.
You need to ensure that Azure can verify the domain name.
Which type of DNS record should you create?
A. PTR
B. MX
C. NSEC3
D. RRSIG
Answer: B
Question: 62
You have an Azure subscription named Subscription1 that is used be several departments at your
company. Subscription1 contains the resources in the following table:
Another administrator deploys a virtual machine named VM1 and an Azure Storage account named
Storage2 by using a single Azure Resource Manager template.
You need to view the template used for the deployment.
From which blade can you view the template that was used for the deployment?
A. RG1
B. VM1
C. Storage1
D. Container1
Answer: A
Explanation:
1. View template from deployment history
Go to the resource group for your new resource group. Notice that the portal shows the result of the
last deployment. Select this link.
2. You see a history of deployments for the group. In your case, the portal probably lists only one
deployment. Select this deployment.
The portal displays a summary of the deployment. The summary includes the status of the
deployment and its operations and the values that you provided for parameters. To see the template
that you used for the deployment, select View template.
References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-manager-
export-template
Question: 63
DRAG DROP
You have two Azure virtual machines named VM1 and VM2. VM1 has a single data disk named
Disk1. You need to attach Disk1 to VM2. The solution must minimize downtime for both virtual

Az 104 1 55 PDF

Uploaded by

Copyright:

Available Formats

Az 104 1 55 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Az 104 1 55 PDF

Uploaded by

Copyright:

Available Formats

What is the minimum number of rules and action groups required to ensure you receive an email when virtual machines are powered off, restarted, or deallocated?

What is the minimum number of rules and action groups required to ensure you receive an email when virtual machines are powered off, restarted, or deallocated?

You have 100 Azure subscriptions associated with the same Azure Active Directory tenant. How can you create a report that lists resources across all subscriptions?

You have 100 Azure subscriptions associated with the same Azure Active Directory tenant. How can you create a report that lists resources across all subscriptions?

Microsoft AZ-103 Exam

Exam Microsoft AZ-103 Exam

Title Microsoft Azure Administrator Exam

“Best Material, Great Results”. www.certkingdom.com 1 of 1

Product Questions: 247

You have an Azure subscription that contains 10 virtual machines.

A. three rules and three action groups

Which resource can you move to RG2?

these questions will not appear in the review screen.

To answer, select the appropriate options in the answer are

A. Configure the extensions for VM3 and VM4.

Store1 contains a file share named Dat

A. an XML manifest file

You regularly create and delete virtual machines.

You deploy a Linux virtual machine named VM1 to Subscription1.

A. Modify the extensionProfile section of the Azure Resource Manager template.

A. Add a 500-GB managed disk.

Subnet1 is associated to VNet1. NIC1 attaches VM1 to Subnet1.

A. Modify the properties of NSG1.

You apply RT1 to Subnet1.

You plan to deploy five virtual machines to a virtual network subnet.

A. Move VNet1 to Subscription2.

A. Associate the NSG to Subnet1.

Box 1: vNET6 only

Subscription1 contains the virtual machines in the following table:

To which subnets can you apply NSG1?

A. the subnets on VNet2 only

You create an Azure Storage account named contosostorage.

You plan to create a file share named dat

these questions will not appear in the review screen.

separate resource groups.

A. From the Directory role blade, modify the directory role.

You have an Active Directory forest named contoso.com.

A. From Synchronization Service Manager, run a full import.

Adatum.onmicrosoft.com contains the user accounts in the following table.

A. Azure Active Directory (AD) Identity Protection and an Azure policy

Your company registers a domain name of contoso.com.

Your company registers a domain name of contoso.com.

Your company registers a domain name of contoso.com.

these questions will not appear in the review screen.

You have an Azure subscription.

*Ensures that compliance reports in the Azure portal are accurate.

You might also like