PVR Manual

MVIX PVR Player
Ver 1.0
U
Users M
Manuall
www.mvixusa.com
1 MvixUSA
Downloaded from www.Manualslib.com manuals search engine

Safety Notes
The following are to protect safety of user and to prevent damages to property.
Use product properly after carefully reading the following contents.
Violating instructions
Warning
may lead to serious Caution may lead to slight
injury or damage to
injury or death. product.
○ Instructions
Contact by wet hand

Act prohibited prohibited
Modification prohibited Power plug to be separated

from power outlet
Do not connect a number of power Do not forcefully pull out power Do not insert of pull out power
plugs at the same time. (This may cord. (Breakage of power cord plug with wet hand. (This may
generate heat or cause fire.) may cause fire and electric shock.) cause electric shock.)
Do not insert power plug if it fits Make sure to turn off power switch Do not place plant pots, cups or
loose to power outlet. (This may and pull out power plug when objects filled with chemical or
cause fire or electric shock.) moving product. water, etc. on top of product. (This
may cause breakdown of product.)
Clean the outside of product by Product must not be disassembled, Do not forcefully bend the
wiping it with lightly wet or dry repaired or modified. Take caution connected power cord or have it
towel. (Using detergent for grease not to have foreign substances pressed down by heavy objects.
removal, thinner or heavily wet inserted into products. (This may (This may cause fire or electric
towel, etc. may cause breakdown cause breakdown of product or shock.)
of product.) electric shock.)
2 MvixUSA

Safety Notes
The following are to protect safety of user and to prevent damages to property.
Use product properly after carefully reading the following contents.
Violating instructions may lead to slight
Warning may lead to serious
injury or death. Caution injury or damage to
product.
○ Instructions
Contact by wet hand

Act prohibited
prohibited
Power plug to be separated

Modification prohibited
from power outlet
Do not drop objects on top of Do not place plant pots, cups or Do not place heavy objects on top
product or exert impact to product. containers filled with chemical or of product. (Falling of objects may
Keep product away from severe water, etc. on top of product. (This cause injury.)
vibration or magnetic objects.) may cause fire/ electric shock.
Falling of the objects may also
cause injury.)
j y)
Do not cover up product or install Install product in level and stable Product must not be disassembled,
it in places with poor ventilation, place. (Otherwise, product may not repaired or modified. Take caution
such as a wall closet, etc. operate normally.) not to have foreign substances
inserted into products. (This may
cause breakdown of product or
electric shock.)
Do not install product in places Do not install product under direct Do not place product in water.
where temperature is too high (35˚ sunlight or near objects of heat, (This may cause breakdown of
or higher)/ too low (5˚ or less) or such as lit candle, cigarette or fire, product or electric shock.)
humidity is high. etc.
3 MvixUSA

Table of Contents
Safety Notes 2
About Product 5
Notes 7
Specifications 8
Components 10
Hardware Installation 11
Connection 13
Remote Controller Functions 14
Chapter 1. PVR Setting
1) HDD Formatting 17
2) Language/ Resolution/ Time Setting in Wizard 20
3) Network Setting in Wizard 21
Summary of Main Menus 22
Chapter 2. Major Functions
1) MEDIAPLAY 23
1-1 Music 23
1-2 Photo 24
1-3 Movie 25
1-4 Network Share Folder and Trans-code Server 26
2) DIGITAL LIBRARY 29
2-1 Video In Recording 29
2-2 Simultaneous Use of Recording and Media Play 30
2-3 Time Shift 30
3) RECORDINGS LIBRARY 31
3-1 Play Recorded Title 31
3 2 Sort
3-2 S t Recorded
R d d Title
Titl 32
3-3 Change Name of Recorded Title 33
3-4 Edit Recorded Title 34
3-5 Delete Recorded Title 37
Chapter 3. For Advanced Users
1) Timer 38
1-1 Add Preset Recording 38
1-2 Delete Timer 40
1-3 Timer Status Change 40
1-4 Timer History 41
2) File Manager 42
2-1
2 1 Copy Function 42
3) MvixLive Function 44
4) UPnP Server Function 45
Chapter 4. Media Environment Setting
1) Language Setting 46
2) Audio Setting 47
3) Video Setting 47
4) REC Setting 49
5) Network Setting 51
5-1 Wired Network 51
5-2 Wireless Network 52
6) System Setting 53
7) Other Settings 55
Chapter 5. MvixFTS Use and Share
1) MvixFTS Installation 57
2) Windows XP Share Folder Setting 58
3) Change/ Give Power for Windows XP Share Folder (Copy Function) 59
Chapter 6. iPod Expanded Connection Control 60
4 MvixUSA

About Product
PVR Function
F i
Using MvixPVR, you can record a film you are watching on real-time basis with a single remote
controller button. Also, while record is in progress, you can check the film being recorded. Using
Recording library menu, you can view title of the film being recorded. By playing the title of the
recorded film, you can view the film per stage in slow motion with the Slow key on the remote
control. This function is convenient to use when watching sports with fast actions.
MvixPVR supports time shift function. The film you are watching can be temporarily stopped on a
real-time basis. The time shift function will allow you to stop watching a the TV show at any point (for
a unexpected reasons) and allow you to continue where you stopped at a later stage so as to ensure
that you do not miss out on the TV show. During time-shifting mode you can also rewind or use slow
motion in progress. (Time shift does not create recorded file.)
MvixPVR supports scheduler function that executes recoding by automatic booting on the preset date
and time, even when the product function has been stopped..
MvixPVR supports the basic function to easily edit video content. You can simply cut, separate, split,
merge and copy video content by using the buttons on the remote control.
MvixPVR supports UPnP server functions. MvixPVR supports free DDNS so that you can connect to the
internal HDD of the PVR not only from your local PC, but also from any PC with a Internet connection.
This function can be used from an external device that supports UPnP client.
The built in iPod dock makes it possible to use your iPod on the MvixPVR. When using a iPod that
that supports TV-OUT function you can easily display your iPod video content on your TV. Ipod
recording and charging functions are also supported. The MvixPVR remote also controls many of the
iPod functions.
※ MvixUSA does not hold responsibilities for recording commercial broadcasting contents and
showing them for illegal/ commercial purposes rather than personal/ non-commercial use or trading
the recorded contents illegally. Note that the person recording the contents shall wholly assume civil
accountability/ criminal responsibility.
5 MvixUSA

About Product
Multimedia library
High-Resolution HD-level Media File Playback: MvixPVR supports the max. of 1920X1080 interface scan to
provide clear and high-resolution video picture quality. MvixPVR is built on the sophisticated video-decoding
technology of Sigma Chipsets, thus delivering crystal-clear, video output to your HD-LCD or Plasma.
Supporting Diverse Movie Format Types

MvixPVR supports a variety of HD files, such as TP, TS and TRP files, along with the popular MPEG, DivX
(3/4/5), Xvid, DAT, ISO, DVD (VOB, IFO) and MKV / WMV / ASF / MOV (if using trans-code server), etc. You
can conveniently enjoy watching movies anywhere as long as you have access to a display device, such as
TV, etc. (supporting SD-level film play for MKV).
Convenient Copy
MvixPVR allows you to copy a recorded media file (with FAT32 partition) to a network-connected PC. Also,
you can copy files from PC to MvixPVR HDD or to USB storage device connected to MvixPVR.
Supporting Diverse Music Files

MvixPVR supports a variety of music sources, such as MP3, OGG, WAV, WMA, AC3 and DTS, etc. The player
supports fast rewind / forward functions to enable media sampling.
Digital Photo Album

MvixPVR supports the upgraded JPEG and BMP image files. The entire family can enjoying watching the files
through TV, etc. Also, vertically photographed filed can be rotated in screen for viewing without requiring
modification.
Network-shared File Play

Files shared on a network can be played through wired/ wireless means without having to move them to the
MvixPVR hard disk..
Supporting USB Host

MvixPVR supports 2 USB2.0 hosts. By connecting USB external storage devices, you can easily add additional
storage to the MvixPVR and play the files on the external USB devices. A USB type memory card reader, etc.
can also be used.
Supports High Resolution HDMI

Built in with HDMI terminal for digital signal output, MvixPVR enables you to enjoy video content with better
picture quality..
5.1CH Audio Output and Down-Mix Function

MvixPVR provides 5.1CH AC3 audio and DTS, etc. Also, down mix function lets you play 2CH audio through
TV, etc. without requiring an additional decoding device, such as amplifier, etc. (optical, coaxial).
6 MvixUSA

Notes
1 Contents with copyright, such as music sources or media contents, etc., are protected pursuant to the related laws
and regulations, such as Copyright Act, etc. The legal responsibilities in violating copyright or intellectual property
right by using this product shall be assumed by the user.
2 Make sure to confirm the CODEC of your media file before playback. There are thousands of codecs available in the
market and this product does not support all of those types. Only the playable CODEC files must be used. Even if
CODEC is playable, the file may not be successfully played according to file characteristics or user environment.
3 When removing USB after connection to a PC, make sure to protect data and prevent erroneous operation of product
by removing safety device. Also, make sure to turn off power of product when connecting or disconnecting separate
storage devices to USB host of product. Otherwise, it may cause erroneous operation of product.
4 For hard disk, use 3.5” SATA type HDD. It must be formatted by the format method used by product. So, make sure
to complete formatting when using product for the first time. Format erases all data. Make sure to back up.
5 This product uses a Windows PC and network sharer function. Network sharer may not operate normally due to error
in Windows program or user environment. MvixUSA is not liable for this.
6 Save data stored in this product separately in a safe location. MvixUSA does not assume responsibilities for loss of
or damage to the stored data.
7 Do not drop or exert impact to product. This may cause breakdown of product.
8 Protect inside of product from metallic objects or combustible foreign substances, etc. This may cause fire or
breakdown of product.
9 Do not randomly disassemble, modify or repair product. This may cause breakdown of product. After-sale service
will be provided at cost for breakdowns caused by random disassembly, modification or repair.
10 Keep product not to be in contact with water or liquid. Also, do not use product in a humid area. This may cause fire,
electric shock or breakdown of product.
11 Do not clean the surface of product with chemical substances or detergents. This may damage the surface of
product.
12 Do not expose product to high heat or direct sunlight. Long-term storage or use in high temperature may cause
breakdown or disable successful file play. Make sure to use product in a well-ventilated area.
13 Do not leave product near highly magnetic objects. This may lead to data loss and breakdown of product.
14 Connect all cables when power to MvixPVR and TV is turned off. Mvix can be used as a multimedia player and a
mobile disk when connected to PC. However, both functions cannot be used simultaneously.
15 Product may not operate successfully if used for a long period of time or used in areas with harmful elements. If
buffering occurs, stop operation and restart product. Or rebooting is also recommended.
7 MvixUSA

Specifications
Titles of Parts
⑤
⑥
① ②③
⑨
①
④
③
⑬⑫ ④ ②
⑧ ⑥⑤ ⑩ ⑪
Front Back
① Direction key (up/ down/ left/ right) ① Wireless antenna
② Direction key OK (press) ② Optical terminal
③ Direction key OK (press by 3 seconds or ③ 10/100Mbps LAN port

longer ->
> move to HOME)
④ USB2.0 A-type 2-port host
④ LCD status window
⑤ Stereo RCA terminal
⑤ Power button
⑥ Component terminal
⑥ IR reception part
⑦ Composite terminal
⑦ iPod expand connections
⑧ HDMl terminal
⑨ Input composite terminal
⑩ Input stereo RCA terminal
⑪ Fan
⑫ USB 2.0 A-type slave
⑬ Power
8 MvixUSA

Specifications
Specifications
Product Name MvixPVR
Operating System Linux
Recording Partition : UDF (UNIX file system)

File Format
File Partition : FAT32 / NTFS
Recording
HQ, SP,LP,EP,SLP
Mode
Encoding
Video MPEG II (PAL 720x576, 352x576 / NTSC 720x480, 352x480)
(Recording)
Audio MPEG II (48KHz Stereo 256Kbps / 192Kbps)
MPEG2 HD(ts,tp), Divx HD(avi), Xvid HD(avi), MPEG1/2 (dat,mpg.vob.ifo.iso), Divx (avi),
Video Xvid(avi), MKV(NOT H.264),
(Transcode server use : MKV(H.264 720P), RMVB, MOV,WMV)
Supported Files &
Formats MP3, WMA, ACC, OGG, WAV, AC3,
Audio
DTS decoding including down-mixing, DTS pass through
Image BMP, JPEG/JPG (Progressive JPEG not supported)
Video Input Composite,
Video Output Composite, Component, and HDMI 1.1 With CEC
Analog
g Stereo RCA
Audio Output
Digital Coaxial, Optical
TV System NTSC, PAL, or HDMI AUTO
HD COMPONENT Y, Pb, Pr (480, 720,1080) / HD HDMI (480, 720,1080i)

Hi-Def Decoding
WMV, ASF, AVI and MP4 formats
MPEG-1 and MPEG-2 Layers I, II and III (MP3), MPEG-2 BC multi-channel layers I, II and III, MPEG-2 and
Audio Decoding
MPEG-4 AAC-LC,WMA9 and WMA9 Pro decoding
Wire Ethernet ((10/100)) LAN via RJ-45 Port

Networking
Wireless Wireless LAN
Network Security Wireless: WEP, WPA,
Wireless : IEEE802.11b/g, 5dBi antenna (SMA type)

Network Protocol Wire : 10/100Mbps Fast Ethernet (RJ45)
TCP/IP (DHCP client mode, Manual IP mode)
Hard-Disk Type 3.5” Internal SATA Ⅰ/Ⅱ (Not included)
USB Interface USB2.0 host, USB2.0 Slave
Adapter : Input : AC 100V-240V, 50/60Hz Out put : DC 12V, 3A

Power
DC In : 12V
Dimension 225mm(W) X 200mm(H) X 59mm(D)
9 MvixUSA

Components
MvixPVR R2 Remote Control 5dBi Antenna HDMI Cable
A/V Cable Power Adaptor Power Cable USB Cable
User Manual Driver CD
10 MvixUSA

Hardware Installation
1. As shown above, unfasten the HDD cover screw 2. Remove the HDD cover on the side of product
and open the HDD cover on the side of product. by pressing it down in the middle as shown in the
picture.
3. Separate the HDD guard from the main body of 4. Connect the HDD guard and SATA HDD
MvixPVR. as shown in the picture. Fasten screws.
11 MvixUSA

Hardware Installation
5. As shown above, slowly push the HDD guard 6. Install power cable and SATA cable to the
together with the SATA HDD into the main body of mounted hardware.
MvixPVR.
7. When hardware mounting is completed, close 8. Hardware installation of the MvixPVR has been
the cover and fasten the screw by rotating it in completed.
clockwise direction.
12 MvixUSA

Connection
-Connect composite output of external AV device to Video

In terminal of PVR
PVR.
-Connect one of the video output terminals ie ‘Composite, Component,

HDMI’ to display device, such as TV, etc.
-To connect the audio output you have a selection of either

Stereo RCA, Optical or Coaxial. Connect the output of
your choice to the corresponding audio input on your
TV , amplifier or surround sound system.
Video Audio R Audio L

Input
Connect Connect
AV Device and PVR Video Audio R Audio L
Connection
Out put >> MvixPVR and TV Connection
TV Y/Pb/Pr Video R/L HDMI

terminal
Connect Connect Connect Connect Connect
PVR
terminal Y/Pb/Pr Video R/L HDMI
PVR and Audio Device Connection
Audio Coaxial Optical R/L

terminal
Connect Connect Connect
PVR
terminal Coaxial Optical
TV에 내장되어 있는R/L
단자
Terminal on TV Large TV with home theater system

Terminal on audio device
※ Video signals connected to the video input (Composite) are transferred to the video out (Composite).
The relaying function is carried out even when power is turned off. However, power adaptor must be connected
13 MvixUSA

Remote Controller Functions
1. POWER //STAND BY
2. LIBRARY 21. SETUP
3. VIDEO IN 22. MVIX LIVE
4. NUMBER BUTTONS 23. RECORDINGS
5. TVOUT 24. INFO
6. REC 25. STOP
7. PAUSE 26. PLAY
8. RETURN 27. HOME
9. NAVIGATION buttons 28. GOTO
10 ENTER
10. 29 PREV/NEXT
29.
11. SELECT 30. SLOW
12. FR/FF 31. SKIP >
13. TIME SHIFT 32. VOL
14. SKIP < 33. A-B
15. ZOOM + - 34. SUBTITLE
16. REPEAT 35. MUTE
17. MENU 36. SYNC < >
18. AUDIO 37. FUNC
19. PREVIEW 38. IPOD
20. SHUFFLE
14 MvixUSA

No. Button Function
1 POWER: To turn on/ off power or stand-by mode
2 LIBRARY: Shortcut to LIBRARY menu
3 VIDEO IN: Shortcut to DIGITAL RECORDER menu
4 ~ NUMBER BUTTON: To press buttons for numbers 0 ~ 9
5 TVOUT: Shortcut to HOME (menu) screen when playing DVD file
REC: To start recording/ repetitive pressing for recording by one

one-touch
touch recording (OTR) with
6
the fixed value of 30min/ 60min/ 90min/ 120min/ 180 min
7 TEMPORARY STOP: To stop screen temporarily/ repetitive pressing for moving screen per 1 frame
8 RETURN/ CANCEL: For returning
9 DIRECTION KEY: To move and select cursor
10 ENTER: To confirm selection/ play
11 SELECT: To select files to be copied when using copy function
F.B / F.F: 1.5x/2x/4x/8x/16x/32x speed, function available in mp3 as well

12
Sound output available in 2x speed
13 TIME SHIFT: Stop watching TV at any point and continue where you stopped at a later stage
14 SKIP <-: To go back to screen in play by 10 seconds
ZOOM + / - : To enlarge and reduce screen/ repetitive pressing for adjusting zooming +/ -
15 percentage/ moving to position of enlarged output by using direction keys
Function available for use during film/ photo file play (2x/3x/4x/8x)
16 REPEAT: To repeat file in play or to repeat all media files in the corresponding folder
17 MENU: To change or set DVD file menus by moving to MENU screen during DVD(VOB) file play
18 AUDIO: TO change or select audio tracks of file in play
15 MvixUSA

No. Button Function
PREVIEW: To turn on/ off preview screen automatically displayed in media play file search mode
19
20 Shuffle: To change play sequence to shuffle (for iPod only)
SETUP: Function available when playing media file or using menu’s in VIDEO IN screen
21
To display various setup screens
22 MVIXLIVE: Shortcut to MVIXLIVE menu
23 RECORDINGS: Shortcut to RECORDINGS menu
INFO: To display the current status

24 Function available while recording is in play/ repetitive pressing for displaying
network status/ to hide or display OSD of TIME SHIFT function
25 STOP: To stop file in play
26 PLAY: To play the selected file
27 HOME: To go to main screen or to display the projected main screen
GOTO: To select file in the same title or to execute shortcut to the already designated
28
chapter position/ shortcut to the desired time position
29 PREV/NEXT: To move to previous file (list) or next file (list)
SLOW: Repetitive pressing for play in slow motion by 3/4x / 1/2x / 1/4x / 1/8x / 1/16x / 1x in
30
sequence
31 SKIP ->: To advance screen in play by 30 seconds
32 VOL: To adjust volume
33 A-B: To set zone repetition
34 SUBTITLE: To change text coding language setup for reading subtitle files
35 MUTE: For mute function
36 SYNC <- / ->: To adjust sync of subtitle files played with film (100ms/ 0.1sec)
37 FUNC: To implement the function of ~
38 iPod: To convert remote controller to iPod control mode/ repressing for returning to PVR mode
16 MvixUSA

1)HDD Formatting
To use product, install the HDD and format it by using format menu. (HDD formatted in Windows –based PCs cannot be
used.) After mounting HDD in PVR, move to SETUP
SETUP->SYSTEM
SYSTEM menu. Select “HDD
HDD Format
Format” menu and choose the option
*Note: :Formatting
*주의 포맷을 진행하면 erases allHDD에
files saved
저장된in HDD
모든and파일이
the files지워지며
cannot be복구가
restored. Make sure to 중요한
불가능하므로 backup 파일이
important
있을files.
경우Format
백
is carried out
업하시기 upon user’s
바랍니다. 사용자 consent.
동의로 Therefore,
이루어지는 we do 포맷이므로
not assume responsibility
부주의로 인한 for loss
손실은 caused
책임지지by negligence.
않습니다.
->When HDMI
->HDMI를 is connected,
연결하여 사용할 경우 the해당화면이
screen may보이지
not be않는
displayed. This is because
경우가 있습니다.이는 영상the출력방식이
method ofTV와
image output 않아
일치되지 does
not
보이지match
않는 up경우입니다.
with TV. If screen
화면이 is not displayed,
출력되지 않을 경우 connect TV using
A/V 케이블을 A/V cable.
이용하여 연결 하시면 화면을 보실 수 있습니다.
1. Select OK button and press ENTER in remote controller.
2. The first stage of time shift is adjusted. You can set values by pressing up/ down keys in remote controller. After setup,
select ‘Next’. Default: 1 hour/ Max. of 4 hours, file system UNIX (UDF)
17 MvixUSA

3. Adjust the second stage of multimedia and recording. Capacity allocated to multimedia is divided again in FAT32 and
NTFS, the next stage of Windows file system. After setup, select ‘Next’.
Default: 50% , Min.: 10% file system UNIX (UDF)
Recording DISC : Recordings Library Multimedia DISC : Media Library
4. Adjust the third stage of FAT32/ NTFS. In case of FAT32 partition, the minimum value is 10% or higher. For NTFS
partition, there is no restriction in minimum value allocation. Therefore, it can be allocated as 0%. After FAT32 and NTFS
partition is done,
done Copy Recordings Here,Here which is displayed after format completion,
completion is FAT32 file system and Media
Library is NTFS file system. When NTFS is set as 0%, only HDD1 (FAT32) is displayed. After adjusting capacity, select
‘Next’.
Default: 50%, FAT32 : Min. 10% NTFS : 0%
FAT32 : Copy Recordings Here NTFS : Media Library
TIP
In partition composition of Copy Recordings Here (FAT32), the recorded file is also used as the copy area. Allocate
sufficient capacity if intending to record and store high-capacity files.
18 MvixUSA

5. When setup is finished, select ‘Format’ and press ‘Enter’ to proceed formatting. Do not turn off or adjust power of
product while formatting is in progress. This may cause breakdown of HDD.
6. When message informing format completion is displayed, press ‘OK’. Rebooting is automatically carried out. When
rebooting is completed, HDD initialization is completed.
19 MvixUSA

2) Language/ Resolution/ Time Setting in Wizard
1. When HDD is formatted, initial setup screen is

displayed as shown in the picture. Select your
preferred language used and press OK..
2. Adjust the ratio of TV output resolution. (Refer to

description on TV resolution on page 47
(Setup -> Video.)
3. Set current date and time by pressing up/ down

button. Press OK.
TIP
Make sure to set time to be the same as current time in order for normal recording with record preset function of TIMER.
20 MvixUSA

3) Network Setting in Start Wizard
1. Select the method to connect wired LAN to

network. DHCP IP automatically allocates IP
address.
2. To set static IP address and allocated them, make

and save input by using number keys in remote
controller.
Note
Normal operation is not possible if setting the same IP as peripherals. Make sure to enter accurate IP address within IP
bandwidth that can be used in router.
21 MvixUSA

Summary of Main Menus
1. MEDIA LIBRARY
You can play media of various files, such as film, music and photograph, etc. connected to USB, HDD and NET
or enjoy high-resolution movies. Also, you can connect to and play share files in a computer that is connected
to network. MvixPVR also supports the functions of preview or to control storage devices connected to USB
host. In addition, you can play media file while recording is in progress. By connecting USB card reader to USB
host, various memory chips can be expanded for use. Digital camera and mobile phone, etc., which can be used
as mobile storage device, can be directly connected to play and copy media files.
2. MvixLIVE
The new MvixLIVE functionality enables you to view online movies, photos and weather information directly via your
PVR .
3. DIGITAL LIBRARY
Video input is directly displayed. Also, video content on the display can be recorded or processed for
time shift function. MvixPVR supports multi-threading function that enables you to use the MEDIA LIBRARY
menu by returning to the HOME screen while maintaining the recording status.
4. RECORDINGS LIBRARY
Recorded and saved media files can be viewed. This menus provides the basic editing functions, such as cut,
split, merge and extract file based on Windows file system.
5. TIMER
Set preset recording from VIDEO IN source. When unit is switched off the MvixPVR will automatically turn on
and begin recording. When recording is completed, it will be automatically turned off.
6. FILE MANAGER
Without the complication of having to copy files between storage devices by connecting them to your PC, you
can copy files using USB/HDD/NET from PC to HDD, from USB storage device to HDD or from MvixPVR to
network - connected PC.
7. SYSTEM SETUP
This function is used to make or change various system setups, such as menu language/ subtitle coding
method/ network/ TV output method and audio and video recording setup, etc. Settings can be changed while
file is being played
played. Setup is immediately applied.
applied
8. iPod DOCKING (Expansion)

iPod TV-OUT function can be used. Recording and play control are possible while charging is in progress.
9. UPnP SERVER (Additional Function)

Using free DDNS, you can play or download all data by connecting to HDD mounted in PVR anywhere as long
as there is a local connection PC or PC with Internet connection.
22 MvixUSA

1) MEDIA LIBRARY
1-1.
1 1. Music
<Screen for Preview Display>
<Screen for Music Play>
Music
This menu displays only the music files. In preview screen, file capacity and ID3TAG (V1) are displayed. You can
listen to music while experiencing the upgraded photo conversion effect.
TIP
Shortcut to MEDIA LIBRARY is possible from any menu by using LIBRARY quick button in remote controller.
23 MvixUSA

1-2. Photo
<Screen for Photo Preview> <Rotated Screen>
<Full Screen> <Enlarged Screen>
Photo
This menus displays only the photo files. Zooming function (2x/4x/6x/8x/16x/Fit) lets you expand photos and check their
locations. Using <Left/ Right> keys, you can instantly rotate vertically taken photos without having to modify them
(supporting BMP/ JPEG formats, progressive JPEG format not supported).
All photos in folder are automatically displayed in slide show. The interval of slide show can be adjusted as 2/ 5/ 10/ 30
Seconds or 1/2minutes. A variety of conversion effects are also available.
TIP
You can enjoy slide show with music and diverse effects by activating SYSTEM -> MISC -> Transition Effect setup.
24 MvixUSA

1-3. Movie
<Movie Preview Screen>
< Screen for Movie Play >
Movie
This menus displays only the movie files. Supporting quick preview function, this menus enables you to check before
playing files. You can change and apply setup by entering setup menu while various files (media file, etc.) are being
played.
25 MvixUSA

1-4. Network Share Folder and Using MvixFTS
1. Access net in the first screen of MEDIA LIBRARY.
2. Access net while network is being successfully connected to display network group name. Move to the position of
shared folder in PC and play media file through network streaming. To directly access PC installed with MvixFTS, select
My_Neighbors and search shared folder to play media file.
※ Refer to MvixFTS program installation in page.
26 MvixUSA

< MKV Preview Screen Using Mvix FTS >
<MOV Preview Screen Using MvixFTS>
TIP
If “The file you have requested cannot be displayed directly. Please use Mvix FTS installed in your PC.“ message is
displayed, install MvixFTS program in PC. In MvixPVR, play the movie located in PC.
27 MvixUSA

<WMV Preview Screen Using MvixFTS >
<RMVB Preview Screen Using MvixFTS>
※ About MvixFTS Program
Using MvixFTS application included with your MvixPVR, you can enjoy watching movies that are not
natively supported by the MvixPVR media playback engine, such as MKV/WMV/MOV and RMVB, etc. In
case of MKV, self-play function is supported. However, in case of HD level (x.264) MKV CODEC, play is
only possible by using MvixFTS. Using MvixFTS requires a high CPU use in the PC. Therefore, a high-
spec PC lets you enjoy watching movies without buffering. Successful play of 720P level movie is
possible. For video files of 1080P level that require high specifications, successful play may not be
possible in some PC environments. MvixUSA does not provide a guarantee for this.
28 MvixUSA

2) Digital Recorder
2-1. Video In Recording
<Screen to Select Digital Recorder (Video In) in Main Menu>
<Input Signal Screen at Recording Time>
Select DIGITAL RECORDER menu to display the Video Input digital media. To record the desired part, press in
remote controller to start recording. Each time the button is pressed, recording time is designated as 30/ 60/ 90/
120/180/ 240 min./ off. When recording starts, image of REC button is displayed at the top left-hand corner of screen.
TIP
Using VIDEO IN quick button in remote controller, you can access shortcut function from any menu. This must be
in the state in which movie is being entered into Video In (input) terminal. Recording is not possible if the input signal
itself does not exist.
29 MvixUSA

2-2. Simultaneous Use of Recording

g and Media Libraryy
To check recording status, press INFO in remote

controller and check save position, quality setting
status and recording progress.
To stop
p recording,
g, press
p ‘ST in remote controller.
Press ‘HOME’ in remote controller while recording

is in progress and play movie in MEDIA LIBRARY menu.
<Screen for Pressing INFO Button while Recording is in Progress>
2-3. Time Shift
Press TIME SHIFT button on remote

controller to temporary stop live broadcasting.
Press button to continue playing the movie.

Using TIME SHIFT function keys,
keys slow motion/
rewind and review/ fast view, etc. are possible.
Activate TIME SHIFT function from the beginning
and press button. This way, you can

conveniently rewind the part missed or view it in
slow motion.
<Screen for Time Shirt>
TIP
You can hide/ show OSD in the status bar of TIME SHIFT by pressing button.
30 MvixUSA

3) Recordings Library
3-1. Play Recorded Title
In Home screen, select RECORDINGS LIBRARY menu.
<Screen to Select Recordings Library in Main Menu>
<Screen to Preview Recorded Title>
RECORDINGS LIBRARY menu displays the recorded and saved titles. Select a title and select medium in the left screen to
preview the title. Therefore, the saved screen can be checked instantly. In PLAY menu, press to play the selected
title file. After activating recording, enjoy watching media file in MEDIA LIBRARY menu. Then, enter RECORDINGS LIBRARY
menu to play the recorded title from the beginning without stopping the recording status.
TIP
TIME SHIFT is not saved. However, with this method, TIME SHIFT function can be used while saving is simultaneously carried
out.
31 MvixUSA

3-2. Sort Recorded Title
<Screen for Playback Title Sorting Menu>
1 Return To return to the previous screen
2 Title Number To sort titles according to title number, the order of recording
3 Recording Time To sort titles according to recording time
4 Title Name To sort titles according to title name
5 Recently Added To sort titles according to the recently added files

Title
32 MvixUSA

3-3. Change Name of Recorded Title
Name Change
Names of titles saved with input line and recording time as

default can be changed. Make selection by using
buttons of remote controller. Then, press OK to

change title name.
3-4. Edit Recorded Title
1
2
3
5
6
7
8
1 Return To return to previous screen
2 Set Thumbnail To designate and set preview screen
3 A-B Erase To set and delete the desired zone of A and B
4 Split Title To set and delete the desired zone of A and B
5 Merge Title To merge the recently recorded title and the previous title
6 Add Chapter Mark To set the desired point in advance
7 Remove Chapter Mark To delete the set point
8 Copy REC file to To copy recorded file to record disk

Media When copying high-capacity file of 2GB or more, recorded file is automatically split and
saved per 2GB unit.
TIP
As the basic position of file extraction, file is saved in MEDIA LIBRARY -> Copy Recordings Here disk.
33 MvixUSA

Thumbnail Setting
Set the parts displayed in preview screen. You must press PLAY button at start as it is in temporary stop status. Then, select
Confirm and press in remote controller.
Cut A-B Zone
Set the desired points in the recorded file and delete the designated zone.
Designate starting point as SET A and ending point as SET B. Press OK to delete the designated A-B zone. The deleted
part cannot be restored. Therefore, accurately check the points before deletion by using rewind or fast forward function.
TIP
To accurately designate A-B zone, play file with SLOW button rather than PLAY. This way, you can designate the
zone more accurately.
34 MvixUSA

Split
A single recorded file is split into two. Move to the part for splitting by pressing PLAY or using forward
function. Then,
function Then Press OK.
OK The point of split can be accurately designated by using slow button (3/4x / 1/2x / 1/4x /
1/8x / 1/16x/ 1x).
Merge
Two recorded titles are merged. The selected title is merged with the previous title. With a simple button control,
two titles can be merged into one to create a film of which a variety of frames are combined.
35 MvixUSA

Chapter Designation/ Memory
Quick screen conversion is possible in play position by designating/ memorizing random position in recorded title. If
Using GOTO function, you can move immediately to the designated chapter position without having to memorize
play time.
Clear Chapter Designation/ Memory
This function is used to re-designate or delete the chapter for which random position has been designated/ memorized
in recorded title. Using rewind/ fast forward, etc. move to the required position and press DELETE to delete the
memorized chapter
chapter.
TIP
The part designated as chapter can be used when pressing GOTO button during play.
36 MvixUSA

Copy to Record Disk
Recorded titles saved in UDF system are copied to Copy Recordings Here disk. Video and audio CODEC of the saved
file are encoded and saved as MPEGII.
3-5. Delete Recorded Title
Delete Recorded Title
Recorded titles are deleted. Place selection bar on the recorded title to delete. Then, move it in left/ right
direction to select DELETE menu. Deleted titles cannot be restored. If you are intending to increasing reserve space for
recording while leaving the recorded titles, it is recommended to delete titles after copying them to Copy Recordings Here
partition.
titi
TIP
To copy titles saved in RECORDINGS LIBRARY through connection to USB SLAVE in Windows OS, execute Copy to
Record Hard and connect the titles to USB SLAVE. Then, the files can be viewed in the hard disk in PVR.
37 MvixUSA

1) TIMER
Timer
Automatic booting is carried out to start recording on the date and time designated by preset recording function.
The time applied to scheduler is based on the time applied in MvixPVR. Therefore, before using product, set time
to be the same as actual time in SETUP -> > SYSTEM -> > TIME.
TIME
1-1. Add Preset Recording
Preset Recording
In scheduler, press OK in Edit menu to display a window to preset time for recording.
38 MvixUSA

3 4
As of No. 1, a screen to preset recording date and time is displayed. Preset recording date, time and recording
time are designated in order. It is not necessary to add/ modify the designation each time. Setting is repetitively
made in the order of once, daily, Monday ~ Friday, Monday ~ Saturday, Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday and Saturday.
No 2 shows the time set in MvixPVR
No. MvixPVR. No.No 3 displays the reserve space of HDD as time according to quality type
type.
No. 4 shows the current input screen. (For details on quality type, refer to page 49)
Finish up preset recording time setting and press OK. Then a window is displayed to ask you whether to add the
designated contents in scheduler. Select OK and apply the setting.
TIP
When preset recording schedule is saved and power is turned off, you will automatically enter standby mode.
Then, the middle and right LEDs in the main body of PVR simultaneously start blinking.
39 MvixUSA

1-2. Delete Timer
Delete Timer
Move to delete menu to find Select Menu in which you can delete the presetting selected from the preset list in
scheduler and menu window where you can delete all preset list
list. Press OK to use the function
function.
1-3. Timer Status Change
Timer Status Change

g
This function is used to temporarily stop the status of using the saved preset recording list or to change the status
back to ‘use’. To change the status of preset recording list, place cursor on the list to change and press OK button
in remote controller. When status change window is displayed, select ‘use timer with user setup/ temporarily stop
the selected schedule’ menu.
40 MvixUSA

3 Chapter 3. For Advanced Users
1-3. Timer History
Timer History
This function is used to check the record scheduler menu. You can check the success status of schedules that have
been completed within the preset recording window. Success is indicated as OK and failure as Fail.
41 MvixUSA

2) FILE MANAGER
1-1. Copy Function
Copy
File is copied to either the storage device that is

connected to MvixPVR or to a share folder on a network-
connected PC. File can be is copied both ways by using
USB, HDD and NET.
This function enables you to use USB->HDD,NET /
HDD-> USB, NET / NET -> USB, HDD.
C
Copy is
i not possible
ibl iin M
Media
di Lib
Library fil
file system among
target disks (Copy Recordings Here (FAT32)/ Media
Library (NTFS)). Copy is possible to Copy Recordings
Here disk. As for partition, copy is possible at present
only to disk of FAT32 file system.
MvixPVR supports the function to conveniently copy files among USB/ HDD/ NET only with a remote controller.
Firstly, search file to copy in source window screen. Place cursor over the file and press Select in remote controller to
select the file. If a folder is selected, all files in the folder are copied. MvixPVR also supports the function to select and
copy files from various folder
TIP
Copy function can be used for all files in addition to video files. Two drives appear when accessing HDD mounted in
PVR. Each drive holds the file system of Media Library : NTFS/ Copy Recordings Here : FAT32.
42 MvixUSA

Check the original file to copy as shown above. Then, select the “copy to” position. Press right direction key in remote
controller to display a window asking for the status to proceed copy. Select OK and press ENTER in remote controller.
When copy proceeds, the above screen is displayed.
When copy is completed, the above screen is displayed. If OK is selected, the screen will display the browse file
menu. If No is selected, you will be returned to the first screen for copy.
Refer to network setting in page 59 if the above message is displayed when attempting to copy files into a share
folder of a PC located on the network.
43 MvixUSA

3) MVIX LIVE
What is MvixLive?
MvixLive supports real-time broadcasting streaming. Using online RSS, You can use popular film, digital photo and weather
functions. For user convenience, MvixLive also supports a unique search function for easy accessibility.
TIP
Connection may not be possible if link is not normal or has been blocked.
44 MvixUSA

4) UPnP Server
Using Mvix UPnP Media Server
SYSTEM SETUP
SETUP->> MISC
MISC->
> UPNP MEDIA SERVER -> > ON
Activate Mvix PVR UPnP function through the above sequence.
In SYSTEM SETUP -> NETWORK, enter the allocated IP address for connection to MvixPVR UPnP Server.
By using the free DDNS of www.mvixusa.com, you can connect to the MvixPVR anywhere, anytime.
Default value of port number is 80. For port number of random value, up to 4-digit numeric combination can be used.
45 MvixUSA

1) Language Setting
1 Menu Language 2 Text Encoding
Language for menu is changed. Available Method of display to fetch subtitle file from computer
languages are English, Japanese, Spanish, French, is changed.
German, Italian, Korean and Dutch. The changed Unicode(UTF8)/ Korean/ Western/ Turkish/ Central
language is immediately applied. European/ Greek/ Cyrillic/ Hebrew/ Source Eastern
are available.
TIP
Unicode, the industrial standard designed to consistently express and handle all letters of the world in a
computer, environment.
46 MvixUSA

2) Audio Setting
Digital Audio Output
To output down-mixing option of DTS and Dolby5.1 to 2 channel stereo select HDMI/ SPDIF output as LPCM,
To output DTS and Dolby 5.1 select RAW HDMI/ SPDIF, connect coaxial or optical cable to amplifier/ receiver,
and it will decode the 5.1CH DTS/ Dolby digital output.
3) Video Setting
Aspect Ratio
Screen ratio can be set to suit TV type. Setting is changed to Pan Scan 4:3/Letter Box 4:3/16:9.
Pan Scan 4:36 This ratio is used when aspect ratio of TV is 4:3
4:3. This setting is to show the film of 16:9 ratio by
cutting it to 4:3 size.
Letter Box 4:3 This ratio is used when aspect ratio of TV is 4:3. This setting is to show the 16:9 film full of
screen in its original ratio.
16:9 This ratio is used when aspect ratio of TV is 16:9 to show film with the ratio of 16:9. As of 4:3
ratio, this ratio shows the film full of screen.
47 MvixUSA

1 2
Brightness Contrast
Brightness of the displayed screen is adjusted. Contrast of the displayed screen is adjusted.
While video is in play, press SETUP in remote While video is in play, press SETUP button in
controller. Brightness can be adjusted while remote controller. Contrast can be adjusted
Video is in play. while video is in play.
TV System
Video output resolution is changed. PAL and NTSC modes are not compatible with
each other. Therefore, it must be adjusted to the TV in use. There is a function
that automatically adjusts output to TV system. Therefore, it is not necessary to
change PAL/ NTSC modes.
PAL Mode: 576P/720P 50Hz/1080i 50Hz
NTSC Mode: 480P/720P 60Hz/1080i 60Hz
TIP
Screen is not displays if selecting NTSC output mode in PAL system TV. In this case, repetitively press button
in remote controller to display screen or repetitively change output resolution.
48 MvixUSA

4) REC Setting
Recording Quality
Quality of recording is designated.
For information on recording quality, refer to the table below. (Video CODEC: MPEG 2 , Audio CODEC : MPEG2, 2CH)
Average
Resolution Resolution
Recording Mode Bitrates Audio Format
(PAL) (NTSC)
(Video)
HQ High Quality 1,096 KB/s 720x576 720x480 48KHz stereo, 256Kbps
SP Standard Play 549 KB/s 720x576 720x480 48KHz stereo, 256Kbps
LP Long Play 355 KB/s 720x576 720x480 48KHz stereo, 256Kbps
EP Extended Play 257 KB/s 352x576 352x480 48KHz stereo, 256Kbps
SLP Super Long Play 178 KB/s 352x576 352x480 48KHz stereo, 192Kbps
49 MvixUSA

Auto Chapter
Time of automatic chapter

use is designated.
Permanent Time Shift
Status of permanent time

shift is set in using time
shift function.
Default: Off
REC Device
Recording storage position is

changed.
Time Shift Device
Temporary storage is
changed when executing
real time temporary stop
real-time stop.
※ In case of USB device, only the file system of FAT32 is applicable.
50 MvixUSA

5) Network Setting
5-1. Wired Network Setting
<Wired Network Not Connected> <Wired Network Connected>
Automatic Allocation
Mode (DHCP)
When making connection
by using wired LAN,
connection is automatically
made to network if
selecting automatic IP
allocation.
allocation
Manual Static IP
This function is for using static IP or for manual connection.
When setting is completed, press If IP address is displayed as of the example on the

OK to attempt connection. Then, right, network connection is completed with IP
network is connected. successfully received.
51 MvixUSA

5-2. Wireless Network Setting
<Wireless Network Not Connected> <Wireless Network Connected>
The following are descriptions on the method of wireless network connection by searching
signals. To use wireless network, you need wired/ wireless sharer.
Select Modify and move to the Select signal search mode. When SSID for connection is
next step. Move to the next step. displayed, select it and move to the
※ Only WEP encrypted next step.
connection is explained.
Check the selected SSID. Press OK Select wireless security encryption. When encryption input screen is
and move to the next step
step. WEP Auto (Open/Shared key) / displayed, enter the accurate
WPA is supported. password and press OK to attempt
connection.
52 MvixUSA

6) System Setting
1 Time
Set time of MvixPVR that serves as the basis of using TIMER function.
Using up/ down/ left/ right keys in remote controller,
set year/ month/ day/ hour/ minute/ second.
Press OK to save the set values.
2 HDD Format
F t
Manual format is enabled when installing hard disk for the first time or
replacing it.
※ Formatting erases all data in hard disk. Caution is required as the
erased data cannot be restored.
3 DIVX
URL address related to registration code of Dvix

registered in this product is displayed.
53 MvixUSA

4 Restoring Default Value

All set values are restored to default.
※ Data in hard disk are not deleted or initialized.
To initialize HDD, use HDD Format menu.
5 Firmware Upgrade
The current firmware version is displayed.

Firmware update through USB storage device is possible. For firmware download and update, visit our
website. (http://www.mvixusa.com ) for detailed information.
54 MvixUSA

7) Other Settings
1 Slide Show Time
This is to set the time of which

display is produced and maintained when viewing photos.
Time can be designated as off/ 2sec/ 5sec/ 10sec/ 30sec/ 1min/ 2min.
2 Transition Effect
When viewing photos, transition effect to move to the next photo is

set. Total of 7 effects are available. All other randomly applied
effects are also supported
supported.
55 MvixUSA

3 MediaPlay Movie Preview
In Media Play function, you can disable or enable preview function.

This is not applied in Playback menu. On/Off setting can be made by
using Preview key in remote controller.
4 UPNP Media Server
UPnP server implementation

p is p
possible. You can p
play
y or download
HDD files by connecting with IP address of MvixPVR from local PC.
5 Interface Sound
Sound effect for MvixPVR menus is set.
56 MvixUSA

1) Mvix FTS Installation
What is Mvix FTS?

This application converts and transmits movies
made with a CODEC that is not supported in
MvixPVR into MPEG CODEC on a real-time basis.
MvixFTS enables to transcode the output of
movies in H.264/ WMV / MOV / RMVB / RM
Format stream it to MvixPVR on a real time basis.
MvixFTS can be used only when it is
installed on a PC that is connected on
the same
local network.
When the above screen appears, click Next.
Find Mvix FTS program in the CD enclosed in this product package and start installation.
Mvix FTS program can be downloaded in data room at http://www.mvixusa.com
Screen to designate program installation route is displayed. Click Install.
Shortcut Icon
TaskBar Icon
Installation is completed. Program will be executed. Program is executed by icon on background screen
or in ‘Start -> Program -> Mvix FTS program group.
57 MvixUSA

When running program, the above screen is displayed. Click Net Share Dialog to display the following
screen. If share folders exist in PC, the folders will be displayed in list.
2) Windows XP Share Folder Setting
First, you must share the folder that includes a movie

First
you intend to play by using MvixFTS server. This
Description is given based on Windows XP SP3.
As shown in the picture, select a folder and right-click

it to display a popup. Then, select the menu.
58 MvixUSA

3) Change/ Give Power for Windows XP Share Folder (Copy Function)
Share setting screen of folder registration info. is

displayed as of the following.
Check ‘share this folder in network’ and press OK.
<Ref. #1>
Check share attributes of share folder if ‘Read Only’ is

displayed as of the above when copying a file to the
share folder of NET PC using COPY function. Check
‘network user can change my file’. Then, you can copy
files to the share folder of PC in network when using
MvixPVR COPY function.
※ COPY function can be used not only for video files,

but also for all other files.
Run Mvix FTS program again and press OK in Net

Share Dialog menu. You will see that a folder
designated of network share setting is automatically
added.
Video files of H.264/ WMV/ PMVB/ RM/ MOV mode

contained in a share folder registered in MvixFTS can
be played by streaming in MvixPVR.
MvixFTS program must be kept on in PC. Play will be

stopped if PC is turned off or program is closed
closed.
※ MvixFTS program does not operate when playing CODEC supported by PVR in network. Therefore, it is not necessary to
execute the program. Run MvixFTS program when playing the movies of H.264/WMV/RMVB/MOV/RM, etc.
59 MvixUSA

Chapter 6. iPod Control
IPod Expanded Connection
System Requirements
iPod® compatibility
This product may not be compatible to all iPod models according to iPod firmware version and model.
※ iPod is not included in product package. iPod is the trademark of Apple Inc. registered in the US and other countries.
※ The following contents have been written based on iPod classic.
-Place iPod facing the same direction as the front of

PVR product. Connect iPod by using dock connector.
-This can be used as iPod® charger.
-Press iPod key on PVR power on/ off button on remote controller to change mode to iPod
control. Here, LCD window displays ‘iPod’. This means that iPod mode conversion has
succeeded.
-Each time iPod button is pressed, reception of remote controller alternates between
PVR and iPod.
-Press Play key in remote controller to play MP3 against the background of movie or
photo slide.
-Photo files are displayed by TVOUT in iPod only when they are played in slide show by
pressing Play.
-Button in blue are used used when remote controller is converted

to iPod mode.
※ TVOUT function must be activated when playing movie and running photo slide function in
iPod so that they can be displayed through digital recorder screen of MvixPVR. Standard
menu screens, such as of file list, etc. displayed in iPod LCD window, are not displayed in
MvixPVR Therefore,
MvixPVR. Therefore the screens are not displayed through TVOUT
TVOUT.
※ To play mp3 only after connecting iPod to MvixPVR, sound signal is automatically transmitted
through MvixPVR. However, according to the media play devices connected, sound signal
may be blocked and not produced if there is no image signal.
60 MvixUSA

Warranty Information
Warranty period of this product is calculated from the date of purchasing this product. Therefore, please make
sure to have the date of purchased entered so that to receive service properly. Or, keep the receipt of purchase
and submit it together with service application. In case it is impossible to locate the date of purchase, warranty
period is calculated from the day 2 months after the manufacturing date of this product.
Product Name HD Multimedia Player Product Model Mvix

(MvixPVR)
Manufacturing No. Date of Purchase
Place of Purchase
Name Tel.
Customer E mail
E-mail
Details
Address
Basis of Consumer Damage Compensation

Consumer damage compensation for this product complies with regulations of consumer damage
compensation announced by the Ministry of Finance and Economy.
Details of Warranty
This product has been produced through strict quality control and inspection process. In case defects occur,
you can receive free after-sale service for 1 year after purchasing of this product. (However, service
charge will incur if applicable even during warranty period.) Present warranty card or receipt when
requesting repair of this product.
Exceptions
Power adaptor, various cables and bags, batteries, user manual, installation CD and other accessories as
well as hard disk not sold by MvixUSA are excluded from the scope of warranty. Back up data in hard disk to
prepare for loss. Note that MvixUSA shall not be held liable for data loss caused by problems in use.
Make sure to back up hard disk contents at all times.
Paid Service
Service charge will apply in the following cases even during warranty period of this product.
- Breakdown due to user’s negligence in handling product
- Breakdown due to repair by persons other than the designated after-sale service staffs
- Natural calamities (fire, damage from sea wind, flood, lightning and others prescribed as natural calamities)
- Corrosion due to flooding or pollution by foreign substances
- Damage to product or functional defect due to dropping of product or impact
- Deformation of damage to outside of product due to organic solvents, such as thinner or benzene, etc.
- Breakdown due to random modification of the inside of product by user
- Breakdown due to using of peripherals, etc. not provided by MvixUSA
- Other cases acknowledged of the user’s negligence
Directions for After Sale Service Application

In principle, you must personally visit the head office or service branch. Under inevitable circumstances,
you may use delivery service provided that the cost of delivery service is paid by you.
Address 4229 Lafayette Center Dr., Suite 1700, Chantilly VA 20151

(USA)
Tel. 866.310.4923
Fax 866.614.3880
Website http://www.mvixusa.com
61 MvixUSA

PVR Manual

Uploaded by

Copyright:

Available Formats

PVR Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PVR Manual

Uploaded by

Copyright:

Available Formats

MVIX PVR Player

Downloaded from www.Manualslib.com manuals search engine

Contact by wet hand

Modification prohibited Power plug to be separated

Downloaded from www.Manualslib.com manuals search engine

Contact by wet hand

Power plug to be separated

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Supporting Diverse Movie Format Types

Supporting Diverse Music Files

Digital Photo Album

Network-shared File Play

Supporting USB Host

Supports High Resolution HDMI

5.1CH Audio Output and Down-Mix Function

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

① Direction key (up/ down/ left/ right) ① Wireless antenna

② Direction key OK (press) ② Optical terminal

③ Direction key OK (press by 3 seconds or ③ 10/100Mbps LAN port

⑨ Input composite terminal

⑩ Input stereo RCA terminal

⑫ USB 2.0 A-type slave

Downloaded from www.Manualslib.com manuals search engine

Operating System Linux

Recording Partition : UDF (UNIX file system)

Audio MPEG II (48KHz Stereo 256Kbps / 192Kbps)

Image BMP, JPEG/JPG (Progressive JPEG not supported)

Video Input Composite,

Video Output Composite, Component, and HDMI 1.1 With CEC

TV System NTSC, PAL, or HDMI AUTO

HD COMPONENT Y, Pb, Pr (480, 720,1080) / HD HDMI (480, 720,1080i)

Wire Ethernet ((10/100)) LAN via RJ-45 Port

Network Security Wireless: WEP, WPA,

Wireless : IEEE802.11b/g, 5dBi antenna (SMA type)

Hard-Disk Type 3.5” Internal SATA Ⅰ/Ⅱ (Not included)

USB Interface USB2.0 host, USB2.0 Slave

Adapter : Input : AC 100V-240V, 50/60Hz Out put : DC 12V, 3A

Dimension 225mm(W) X 200mm(H) X 59mm(D)

Downloaded from www.Manualslib.com manuals search engine

MvixPVR R2 Remote Control 5dBi Antenna HDMI Cable

A/V Cable Power Adaptor Power Cable USB Cable

User Manual Driver CD

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

-Connect composite output of external AV device to Video

-Connect one of the video output terminals ie ‘Composite, Component,

-To connect the audio output you have a selection of either

Video Audio R Audio L

Out put >> MvixPVR and TV Connection

TV Y/Pb/Pr Video R/L HDMI

PVR and Audio Device Connection

Audio Coaxial Optical R/L

Terminal on TV Large TV with home theater system

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine