ONYX - 24 EN Online

ONYX 24
Semi-automatic selective soldering machine

to process standard circuit boards
Swiss Engineering
ONYX 24 – REPAIR OF CIRCUIT BOARDS
ONYX 24
The ONYX 24 is used to process printed circuit
boards with dimensions up to 300 x 400 mm.
Due to the integrated vision-system the precise
orientation of components is guaranteed.
The multifunctional hot gas heater head can be
used to solder components, to remove
components and for site clean processes
(contactless removal of residual solder).
In addition many unique options for several
additional processes are available.
MAIN FEATURES
• 2000 watt multifunctional hot gas heater head:
Solder components, remove components, site
clean (contactless removal of residual solder),
customer specific application upon request
• Four motorized axes with closed loop motion
control
• Integrated hand wheels for quick and precise
positioning of the hot gas head
• Automatic process control
• Up to eight thermocouple ports to control
process temperature REPAIR OF SMD-CIRCUIT
• Board handling for boards up to 300 mm BOARDS
width, no limitation for length thanks to the
open construction
Thanks to the high placement accuracy of <10 µm,
• Board carrier handles irregular-shaped assem- the integrated force measurement and the control via
blies without special fixtures four motorized axes, reproducible results and highest
• Bottom pre-heater with a performance of 3500
quality are guaranteed for serial repair and many other
watt and the dimensions of 300 x 300 mm with
integrated board cooling applications. Because of the open construction of the
• Automatic closed loop force control of the ONXX 24 the length of the edited printed circuit boards
Z-axis for automatic picking, fluxing, placing
is not limited.
and removing processes to protect sensitive
parts
The open architecture of the ONYX 24 and the variety
• Closed loop gas flow control from 8 to 80l/min of closed loop controlled parameters of the application
• The MFOV system allows viewing components software VisualMachinesTM allow simple lab
with dimensions up to 75 x 75 mm and allows
applications as well as high complex production
an excellent adjustment of the image contrast
• Semi-automated, contactless site cleaning for processes repetitive and extremely precise.
the removal of residual solder with a motorized
Z-axis
Zevac`s standard gas nozzles from the proven DRS
selective soldering machines can be used on the ONYX
24 without any modification. With the ONYX 24 all
electronic SMD components and all customer specific
components can be handled easily.
Information without warranty; Copyright ZEVAC 2019, Version 01-19

APPLICATION RANGE
Repairs
Misaligned devices can accurately be repositioned and defective components can reliably be replaced.
Prototyping
The components of small printed circuit boards can be assembled and soldered with the ONYX 24 semi-automatically.
It allows already used expensive components to be re-used.
Post-assembly
Components that are missing at assembly time can be placed and soldered later, or individual components which cannot
be handled by the available production machines can be retrofitted with the ONYX 24.
Assembly
When printed circuited boards with only a few components need to be assembled, then the ONYX 24 often can provide
a reliable semi-automated solution.
Components
Zevac`s standard gas nozzles from the proven DRS selective soldering machines can be used on the ONYX 24 without any
modification. With the ONYX 24 all electronic SMD components and all customer specific components can be handled easily.
IR-PREHEATER SYSTEM VISION (MFOV) FORCE PLACEMENT

For lead-free applications Guarantees a highly accurate Accurate motorized force placement
positioning
Preheater: 300 x 300 mm The Z-axes is motorized and places the
3500 watt With the motorized VISION system, the component automatically with
the component and the layout of the force control in the gramme range
Optional board cooling for faster board are projected on top of each onto the board.
cool down. other, verifying the position on all
4 sides. The LED illumination, one
for the component and one for
the board-layout, guarantees an
optimum view independent of
surrounding conditions.
1 Vision system
For components up to 70 mm.
2 LED illumination
Swiss Engineering
ONYX 24 – REPAIR OF CIRCUIT BOARDS
TECHNICAL DATA
Product designation ONYX 24
Max. board size 300mm width, ∞ dept
Max. component height 20 mm bottom side (optional 30 mm)
30 mm top side (optional 70 mm)
Gas pressure 4 – 6 bar
Angle rotation of heater head ± 15°
Hot gas Compressed air or nitrogen, 20-80 l/min
Max. power consumption 5600 VA
Electrical power requirements 3 x 400 / 230 VAC, 50 / 60 Hz
Dimensions (W x D x H) 700 x 1120 x 1022 mm
Weight 120 kg (basic machine)
Max. component size 70 x 70 mm
Hot gas temperature 20 - 475°C
DIMENSIONS
ZEVAC AG T +41 32 626 20 80

Vogelherdstrasse 4 F +41 32 626 20 90
4500 Solothurn, Switzerland info@zevac.ch

ONYX - 24 EN Online

Uploaded by

Copyright:

Available Formats

ONYX - 24 EN Online

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ONYX - 24 EN Online

Uploaded by

Copyright:

Available Formats

ONYX 24

Semi-automatic selective soldering machine

Information without warranty; Copyright ZEVAC 2019, Version 01-19

IR-PREHEATER SYSTEM VISION (MFOV) FORCE PLACEMENT

ZEVAC AG T +41 32 626 20 80

You might also like