Limited End Float

When is Limited End Float type coupling used?
A coupling is an element of a drive line that primarily serves the purpose of

transmitting power from one shaft to another, thereby providing for the
connection of the driving and driven machine. At the same time, shaft
misalignments, e.g. caused by assembly inaccuracies, should be
compensated by the coupling while generating minimum reaction forces.
The distinction is made between angular, radial and axial shaft misalignments
which may also occur simultaneously. Depending on the coupling type you
choose, the dynamic behaviour of the entire drive line, and consequently of
the machine and its production process, can often be influenced by adjusting
the torsional stiffness of the coupling.
TSCHAN TNZ Coupling
Electric motors as a commonly used drive

Let us first have a look at the drive end: In most cases, electric motors are used here
which convert electric energy into mechanical energy. An electric motor mainly
consists of a stationary stator and a rotating rotor. The latter is composed of a shaft
which is supported in the motor housing, and a coil that is wound on this shaft.
When applying voltage to the stator, the current flux generates a magnetic field
which in turn generates a magnetic reaction of the coil in opposite direction to the
magnetic force. With the shaft being supported in the direction of rotation, the rotor is
free to turn - apart from a small mechanical resistance out of the bearing – and is set
into rotation. The magnetic force produces a torque that acts on the shaft, and this
torque is determined by the power and the resulting speed. The torque is taken up
by the coupling and transmitted to the driven machine.
The rotor bearing
Fixed bearing/ floating bearing principle
Let us now look at the rotor: The reaction force resulting from its entire weight – i.e.
the force resulting from both, the shaft and the coil – is transmitted via the shaft
bearing to the motor housing and into the foundation. Anti-friction bearings are most
commonly used to support the shaft. Only when high motor powers are involved,
other bearings like sleeve bearings are often used. The selection of the bearing
affects how the rotor is located in the axial direction. With roller bearings, the fixed
bearing-floating bearing principle is preferably applied, i.e. the shaft is axially located
at the fixed bearing in the housing.
Calculation software
MDESIGN of the TEDATA GmbH, Bochum, Germany. More information under www.mdesign.info
Motor shafts supported by sleeve bearings

In contrast to this, a motor shaft supported on sleeve bearings is allowed more axial
movement which is attributable to the structural design of the bearings. In the
following, we only refer to electric motors that are equipped with sleeve bearings, but
do not have an additional axial bearing.
In this configuration, rotors are able to move axially by several millimeters. The coil
has been wound in such a way that, in the center of the motor, the sum of all
generated magnetic forces exclusively acts in the direction of rotation, and thereby
contributes to maximum torque build-up.
As the rotor has more freedom to move axially, the drive line must be aligned such
that the rotor remains at its magnetic centre. The correct way to align the shaft is
indicated by a mark provided between the shaft and the stationary motor housing.
Limited end float

For limiting the end float or end play, a fixed bearing of another shaft is required
which will axially locate the rotor shaft. The fixed bearing is arranged on the opposite
side of the drive – at the non-drive end: This may, for instance, be the bearing of a
gear shaft in a gearbox or the shaft bearing of a powerful compressor.
As mentioned in the beginning, a standard coupling allows for the compensation of
axial misalignment of two shafts. However, this feature of the coupling prevents a
rotor shaft supported in sleeve bearings from being properly aligned to the specified
values. It is, therefore, necessary to use a coupling with limited end float.
TSCHAN limited end float gear coupling
As this denomination suggests, a defined end float in the axial direction is provided
for. The freedom of movement which helps compensate for angular and/or radial
shaft misalignments is not constrained if a limited end float coupling is used.
To answer the initial question:

For motors with sleeve bearings you should always use limited end float couplings
so that the magnetic center of the rotor can be aligned to a fixed bearing arranged
opposite to the coupling, and that the rotor remains at its magnetic center during
acceleration and deceleration of the driving machine. If this was not the case,
undesirable magnetic forces would develop in the axial direction which can adversely
affect the operating performance.

Limited End Float

Uploaded by

Copyright:

Available Formats

Limited End Float

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Limited End Float

Uploaded by

Copyright:

Available Formats

When is Limited End Float type coupling used?

A coupling is an element of a drive line that primarily serves the purpose of

TSCHAN TNZ Coupling

Electric motors as a commonly used drive

Motor shafts supported by sleeve bearings

Limited end float

TSCHAN limited end float gear coupling

To answer the initial question:

You might also like