Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 125 views

    International ProStar Installation Instructions PDF

    Uploaded by

    carlos Robles
    The document provides instructions for connecting power to an International ProStar device using a PeopleNet ProStar Power Assembly. It describes connecting the red wire to constant battery power by inserting it into an unused fuse cavity and splicing it to the main power harness. It describes connecting the white wire to ignition power by inserting it into an unused ignition fuse cavity. It also describes grounding the black wire by securing it to a black grounding tube below the fuse panel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    International ProStar Installation Instructions PDF

    Uploaded by

    carlos Robles
    125 views2 pages
    The document provides instructions for connecting power to an International ProStar device using a PeopleNet ProStar Power Assembly. It describes connecting the red wire to constant battery power by inserting it into an unused fuse cavity and splicing it to the main power harness. It describes connecting the white wire to ignition power by inserting it into an unused ignition fuse cavity. It also describes grounding the black wire by securing it to a black grounding tube below the fuse panel.

    Original Title

    International ProStar Installation Instructions.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for connecting power to an International ProStar device using a PeopleNet ProStar Power Assembly. It describes connecting the red wire to constant battery power by inserting it into an unused fuse cavity and splicing it to the main power harness. It describes connecting the white wire to ignition power by inserting it into an unused ignition fuse cavity. It also describes grounding the black wire by securing it to a black grounding tube below the fuse panel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    125 views2 pages

    International ProStar Installation Instructions PDF

    Uploaded by

    carlos Robles
    The document provides instructions for connecting power to an International ProStar device using a PeopleNet ProStar Power Assembly. It describes connecting the red wire to constant battery power by inserting it into an unused fuse cavity and splicing it to the main power harness. It describes connecting the white wire to ignition power by inserting it into an unused ignition fuse cavity. It also describes grounding the black wire by securing it to a black grounding tube below the fuse panel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    International ProStar

    Last Revised: 04/29/14


    Power Connections Nick Phillip

    Install using the PeopleNet ProStar Power Assembly (available through PeopleNet Technical Support) or use International
    Pins 3573312C1.

    Red Wire – Constant Battery Power

     Locate the main fuse panel behind the passenger-side dash cover.
     Identify an unoccupied power cavity, F8-F, F8-H, or F11-C (map located inside dash cover), and remove the
    orange plastic locking mechanism.
     Insert the connector side of the PeopleNet ProStar Power Assembly red wire into the selected position and
    replace the locking mechanism.
     Splice the PeopleNet ProStar Power Assembly red wire to the red wire on the PeopleNet Main Power Harness.
     Insert a 5 amp fuse in the fuse cavity.

    White

    Wire – Ignition Power

     Locate the main fuse panel behind the passenger-side dash cover.
     Identify an unoccupied ignition cavity, F5-A, F5-E, or F5-F (map located inside dash cover), and remove the
    orange plastic locking mechanism.
     Insert the connector side of the PeopleNet ProStar Power Assembly white wire into the selected position and
    replace the locking mechanism.
     Splice the PeopleNet ProStar Power Assembly white wire to the white wire on the PeopleNet Main Power
    Harness.
     Insert a 5 amp fuse in the fuse cavity.

    Ruan Confidential Page |1


    International ProStar
    Last Revised: 04/29/14
    Power Connections Nick Phillip

    Black Wire – Ground

     Open the passenger-side dash cover.


     Locate the black tube below the fuse panel.
     Secure the black lead to this tube using a ring terminal and self-tapping screw.
     Splice the PeopleNet ProStar Power Assembly black wire to the black and shield wires on the PeopleNet Main
    Power Harness.

    Ruan Confidential Page |2

    You might also like