Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 204 views

    1277743a PDF

    Uploaded by

    Santhosh Sandy
    The document is an engineering drawing for a plate, lower riser chassis pivot. It includes dimensions for holes, radii, and other geometric features of the plate. Notes indicate that all sharp edges should be broken and burrs removed. The material is specified as steel per a referenced standard and nominal thickness is provided in both inches and millimeters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1277743a PDF

    Uploaded by

    Santhosh Sandy
    204 views1 page
    The document is an engineering drawing for a plate, lower riser chassis pivot. It includes dimensions for holes, radii, and other geometric features of the plate. Notes indicate that all sharp edges should be broken and burrs removed. The material is specified as steel per a referenced standard and nominal thickness is provided in both inches and millimeters.

    Original Title

    1277743A..pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is an engineering drawing for a plate, lower riser chassis pivot. It includes dimensions for holes, radii, and other geometric features of the plate. Notes indicate that all sharp edges should be broken and burrs removed. The material is specified as steel per a referenced standard and nominal thickness is provided in both inches and millimeters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    204 views1 page

    1277743a PDF

    Uploaded by

    Santhosh Sandy
    The document is an engineering drawing for a plate, lower riser chassis pivot. It includes dimensions for holes, radii, and other geometric features of the plate. Notes indicate that all sharp edges should be broken and burrs removed. The material is specified as steel per a referenced standard and nominal thickness is provided in both inches and millimeters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    1277743 GT A

    10.34
    3X R.75 1.00 M

    90.0°
    5.75

    R3.65
    2X 2.875

    2.88
    2X R1.00
    2X 7.75

    NOTE:

    1. BREAK ALL SHARP EDGES AND REMOVE BURRS.

    UNLESS OTHERWISE SPECIFIED


    M MATERIAL TABLE UNITS = INCHES
    X.X ± 0.1
    MANUFACTURING X.XX ± 0.06
    DESIGN APPROVED X.XXX ± 0.030
    LOCATION APPROVED NOMINAL
    NOMINAL THICKNESS ANGLES ± 1.0
    THICKNESS TITLE
    DO NOT SCALE

    Moses Lake, WA, USA 1.00" & 26.00mm 1.00"


    PLATE, LOWER RISER CHASSIS PIVOT
    Drawing per GEP024
    Changzhou China 1.00" & 26.00mm 26mm Drawing and Drafting Guidelines
    SIZE SCALE WEIGHT MATERIAL
    B 1:2 ~ 15.17 LB. STEEL, GES1486, CATEGORY III
    CREATED/DRAWN BY DATE SHEET DRAWING NUMBER GROUP REVISION
    RAW MATERIAL TOLERANCES PER REFERENCED STANDARDS IN GES1486
    1277743 A
    TS 10/26/2016 1 OF 1
    ECO
    190962ML
    REV
    A
    REVISION DESCRIPTION
    INITIAL DRAWING RELEASE
    BY
    KK
    DATE
    12/09/2019
    MODEL REFERENCE
    GT

    You might also like