8 7 6 5 4 3 2 1

NOTES: BILL OF MATERIALS

ITEM NO. 43006-01/QTY. PART NO. DESCRIPTION MATERIAL
1. INSTALL O-RINGS WITH APPROVED WATER BASED LUBRICANT. 1 1 43007-01 HOUSING FIBERGLASS
2. REFER TO OPERATIONS AND MAINTANCE MANUAL FOR ASSEMBLY,
DISASSEMBLY INSTRUCTIONS AND REQUIREMENTS. 2 1 43046-01 ASSY, INTERNALS, PX-260 ---
3 2 43019-01 NIPPLE, LOW PRESSURE AL6XN*
F
4 8 10162-01 O-RING, -231 EPDM
F
5 6 10013-01 SEGMENT, LOCK RING, 8" 316 SS
6 2 43009-01 PLATE, BEARING, PORT ALUMINUM
7 8 43031-01 RING, LOCKING, PORT CN3MN
8 2 10078-01 SHCS, 5/16-18 X 1" LG 316 SS
9 2 43042-01 PORT, ELBOW, 3X2.5, AL6 IC, 65 CN3MN
10 10 2 43043-01 PORT, STRT, 3X2.5, AL6 IC, 65 CN3MN
11 2 10065-01 RING, SEAL, QUAD, -442 BUNA-N
12 8 10077-01 SHCS, 5/16-18 X 3/4" LG 316 SS
13 1 10234-01 SCRW, HEX, 5/8-11X.5L, NYLON NYLON
14 1 10235-01 WSHR, FLAT SEALING, 5/8, EPDM EPDM
E E
15 4 43056-01 RING, LOCK, 65 SERIES FIBERGLASS
16 2 43010-01 PLATE, SEALING FIBERGLASS
9 17 2 43012-01 RING, THRUST, 65 SERIES PVC
* OR EQUIVALENT
4
13 14

3
8

D 11 D

6
16

4 16

6 4

C 8 C

3
15

5 Part Number: Description

40018-01 PX-260 ASSY LABELED FOR SEAWATER SIDE UP
12
40018-02 PX-260 ASSY LABELED FOR CONCENTRATE SIDE UP
17 2

B B

REFERENCE O-RING
1 ERI P/N 10165-01
2 08-016 DRAWING REVISED TO INCLUDE REVISED SEAL PLATE FTM 3/31/08
THAT CAPTURES THE O-RING

1 07-029 REVISED DRAWING TO SHOW PX SYMMETRY. CHANGED FTM 09/25/07

LENGTH TOLERANCE TO SYMMETRIC TOLERANCE

INCH 0
REV.
06-028
ECN NO.
CREATED DRAWING FOR THE PX-260
DESCRIPTION
FTM
BY
12/14/06
DATE

UNLESS OTHERWISE SPECIFIED: REVISIONS

TOLERANCES:

FRACTIONAL: 1/32" ENERGY RECOVERY INC.

ANGULAR: MACH .5
BEND 1 1908 Doolittle Drive, San Leandro, CA 94577
TWO PLACE DECIMAL: .01" Ph. (510)483-7370 / Fax: (510)483-7371
THREE PLACE DECIMAL: .005" www.energyrecovery.com
A FOUR PLACE DECIMAL: .0002"
SURFACE FINISH: DRAWN FTM 12/13/2006 TITLE: A
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING
ON PART 125 RMS
ON O-RING SURFACES 32 RMS
CHECKED JGM 12/18/2002
ASSY, 65 SERIES
ENG APPR. RLS 12/18/2002
IS THE SOLE PROPERTY OF ENERGY RECOVERY
INC. ANY REPRODUCTION IN PART OR AS A
PRODUCT DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M (LATEST)
PX-260
WHOLE WITHOUT THE WRITTEN PERMISSION OF SIZE DWG. NO. REV
FINISH:
ENERGY RECOVERY INC. IS PROHIBITED. DRAWING STATUS

C 2008 , ENERGY RECOVERY, INC.

MATERIAL:
SHOWN THIRD ANGLE PROJECTION
C 40018 2
SCALE: 1:5 WEIGHT: SHEET 1 OF 2
8 7 6 5 4 3 2 1